Gossiper seeds host name resolution failures are ignored during restart if
a node is already boostrapped (i.e. it has successfully joined the cluster).
Fixesscylladb/scylladb#14945
get0() dates back from the days where Seastar futures carried tuples, and
get0() was a way to get the first (and usually only) element. Now
it's a distraction, and Seastar is likely to deprecate and remove it.
Replace with seastar::future::get(), which does the same thing.
Pass the broadcast_address from main to get_seeds_from_db_config
rather than getting it from fb_utilities.
Signed-off-by: Benny Halevy <bhalevy@scylladb.com>
The legacy failure_detector is now unused and can be removed.
TODO: integare direct_failure_detector with failure_detector api.
Signed-off-by: Benny Halevy <bhalevy@scylladb.com>
the goal of this change is to reduce the dependency on
`operator<<(ostream&, const gms::inet_address&)`.
this is not an exhaustive search-and-replace change, as in some
caller sites we have other dependencies to yet-converted ostream
printer, we cannot fix them all, this change only updates some
caller of `operator<<(ostream&, const gms::inet_address&)`.
Refs #13245
Signed-off-by: Kefu Chai <kefu.chai@scylladb.com>
Simplified, more direct version of "dependency injection".
I.e. caller/initiator (main/cql_test_env) provides a set of
services it will eventually start. Configurable can remember
these. And use, at least after "start" notification.
Closes#13037
Allows a configurable to subscribe to life cycle notifications for scylla app.
I.e. do stuff on start/stop.
Also allow configurables in cql_test_env
v2:
* Fix camel casing
* Make callbacks future<> (should have been. mismerge?)
Closes#13035
Instead of lengthy blurbs, switch to single-line, machine-readable
standardized (https://spdx.dev) license identifiers. The Linux kernel
switched long ago, so there is strong precedent.
Three cases are handled: AGPL-only, Apache-only, and dual licensed.
For the latter case, I chose (AGPL-3.0-or-later and Apache-2.0),
reasoning that our changes are extensive enough to apply our license.
The changes we applied mechanically with a script, except to
licenses/README.md.
Closes#9937
Looking into init_gossiper() helper makes it clear that what it does
is gets seeds, provider and listen_address from config and generates
a set of seeds for the gossiper. Then calls gossiper.set_seeds().
This patch renames the helper into get_seeds_from_config(), removes
all but db::config& argunebts from it and moves the call to set_seed()
into main.
Signed-off-by: Pavel Emelyanov <xemul@scylladb.com>
It's taken purely from the db::config and thus can be set up early.
Right now the empty name is converted into "Test Cluster" one, but
remains empty in the config and is later used by the system_keyspace
code. This logic remains intact.
Signed-off-by: Pavel Emelyanov <xemul@scylladb.com>
Now the init_messaging_service() only deals with messaing service
and related internal stuff, so it can sit in its own module.
Signed-off-by: Pavel Emelyanov <xemul@scylladb.com>
This struct is nowadays only used to transport arguments from db::config
to messaging_service::scheduling_config, things get simpler if dropping it.
Signed-off-by: Pavel Emelyanov <xemul@scylladb.com>
This makes the messaging service configuration completely independent
from the db config. Next step would be to move the messaging service
init code into its module.
Signed-off-by: Pavel Emelyanov <xemul@scylladb.com>
This is the continuation of the previous patch -- change the primary
constructor to work with config. This, in turn, will decouple the
messaging service from database::config.
Signed-off-by: Pavel Emelyanov <xemul@scylladb.com>
The init_ms_fd_gossiper function initializes two services, but
effectively consists of two independent parts, so declare them
as such.
The duplication of listen address resolution will go away soon.
Signed-off-by: Pavel Emelyanov <xemul@scylladb.com>
C++20 introduced `contains` member functions for maps and sets for
checking whether an element is present in the collection. Previously
`count` function was often used in various ways.
`contains` does not only express the intend of the code better but also
does it in more unified way.
This commit replaces all the occurences of the `count` with the
`contains`.
Tests: unit(dev)
Signed-off-by: Piotr Jastrzebski <piotr@scylladb.com>
Message-Id: <b4ef3b4bc24f49abe04a2aba0ddd946009c9fcb2.1597314640.git.piotr@scylladb.com>
Currently fmt::print is used to print an error message
if (broadcast_address != listen && seeds.count(listen))
and the logger should be used instead.
While at it, the information printed in this message is valueable
also in the error-free case, so this change logs it at `info`
level and then logs an error without repeating the said info.
Signed-off-by: Benny Halevy <bhalevy@scylladb.com>
Test: bootstrap_test.py:TestBootstrap.start_stop_test_node(dev)
Signed-off-by: Benny Halevy <bhalevy@scylladb.com>
Message-Id: <20200630083826.153326-1-bhalevy@scylladb.com>
Tenants get their own connections for statement verbs and are further
isolated from each other by different scheduling groups. A tenant is
identified by a scheduling group and a name. When selecting the client
index for a statement verb, we look up the tenant whose scheduling group
matches the current one. This scheduling group is persisted across the
RPC call, using the name to identify the tenant on the remote end, where
a reverse lookup (name -> scheduling group) happens.
Instead of a single scheduling group to be used for all statement verbs,
messaging_service::scheduling_config now contains a list of tenants. The
first among these is the default tenant, the one we use when the current
scheduling group doesn't match that of any configured tenant.
To make this mapping easier, we reshuffle the client index assignment,
such that statement and statement-ack verbs have the idx 2 and 3
respectively, instead of 0 and 3.
The tenant configuration is configured at message service construction
time and cannot be changed after. Adding such capability should be easy
but is not needed for query classification, the current user of the
tenant concept.
Currently two tenants are configured: $user (default tenant) and
$system.
Changes messaging service rpc to use reloadable tls
certificates iff tls is enabled-
Note that this means that the service cannot start
listening at construction time if TLS is active,
and user need to call start_listen_ex to initialize
and actually start the service.
Since "normal" messaging service is actually started
from gms, this route too is made a continuation.
This patch silences those future discard warnings where it is clear that
discarding the future was actually the intent of the original author,
*and* they did the necessary precautions (handling errors). The patch
also adds some trivial error handling (logging the error) in some
places, which were lacking this, but otherwise look ok. No functional
changes.
We need a way to configure the cql interpreter and runtime. So far we relied
on accessing the configuration class via various backdoors, but that causes
its own problems around initialization order and testability. To avoid that,
this patch adds an empty cql_config class and propagates it from main.cc
(and from tests) to the cql interpreter via the query_options class, which is
already passed everywhere.
Later patches will fill it with contents.
Propagate the abort_source from main() into boot_strapper and range_stream and
check for aborts at strategic points. This includes aborting running stream_plans
and aborting sleeps between retries.
Fixes#4674
There are two reasons for the move. First is that cql server lifetime
is shorter than storage_proxy one and the later stores references to
the semaphore in each service_permit it holds. Second - we want thrift
(and in the future other user APIs) to share the same admission control
memory pool.
Fixes#4844
Message-Id: <20190814142614.GT17984@scylladb.com>
Fixes#4751
Adds using a preferred address family to dns name lookups related to
listen address and rpc address, adhering to the respective "prefer" options.
API, prometheus and broadcast address are all considered to be covered by
the "listen_interface_prefer_ipv6" option.
Note: scylla does not yet support actual interface binding, but these
options should apply equally to address name parameters.
Setting a "prefer_ipv6" option automtially enables ipv6 dns family query.
If a node is a seed node, it can not be started with
replace-address-first-boot or the replace-address flag.
The issue is that as a seed node it will generate new tokens instead of
replacing the existing one the user expect it to replaec when supplying
the flags.
This patch will throw a bad_configuration_error exception
in this case.
Fixes#3889
Signed-off-by: Amnon Heiman <amnon@scylladb.com>
Store the failure_detector object inside gossiper object.
- No more the global object sharded<failure_detector>
- No need to initialize sharded<failure_detector> manually which
simplifies the code in tests/cql_test_env.cc and init.cc.
Fixes#4010
Unless user sets this explicitly, we should try explicitly avoid
deprecated protocol versions. While gnutls should do this for
connections initiated thusly, clients such as drivers etc might
use obsolete versions.
Message-Id: <20190107131513.30197-1-calle@scylladb.com>
Instead, distribute those inclusions to .cc files that require them. This
reduces rebuilds when config.hh changes, and makes it easier to locate files
that need config disaggregation.
Feature lifetime is tied to storage_service lifetime, but features are now managed
by gossip. To avoid circular dependency, add a new feature_service service to manage
feature lifetime.
To work around the problem, the current code re-initializes features after
gossip is initialized. This patch does not fix this problem; it only makes it
possible to solve it by untyping features from gossip.
sprint() recently became more strict, throwing on sprint("%s", 5). Replace
with the more modern format().
Mechanically converted with https://github.com/avikivity/unsprint.
Assign a scheduling_group for each RPC service. Assignement is
done by connection (get_rpc_client_idx()) - all verbs on the
same connection are assigned the same group. While this may seem
arbitrary, it avoids priority inversion; if two verbs on the same
connection have different scheduling groups, the verb with the low
shares may cause a backlog and stall the connection, including
following requests from verbs that ought to have higher shares.
The scheduling_group parameters are encapsulated in different
classes as they are passed around to avoid adding dependencies.
Message-Id: <20180708140433.6426-1-avi@scylladb.com>
This patch adds support for the nodetool viewbuildstatus command,
which shows the progress of a materialized view build across the
cluster.
A view can be absent from the result, successfully built, or
currently being built.
Signed-off-by: Duarte Nunes <duarte@scylladb.com>
Move the configurables to init so tests can link this as well.
Add extensions object to db config in main and provide to
configurables. These can then add extensions at this phase.
This change appears quite large, but is logically fairly simple.
Previously, the `auth` module was structured around global state in a
number of ways:
- There existed global instances for the authenticator and the
authorizer, which were accessed pervasively throughout the system
through `auth::authenticator::get()` and `auth::authorizer::get()`,
respectively. These instances needed to be initialized before they
could be used with `auth::authenticator::setup(sstring type_name)`
and `auth::authorizer::setup(sstring type_name)`.
- The implementation of the `auth::auth` functions and the authenticator
and authorizer depended on resources accessed globally through
`cql3::get_local_query_processor()` and
`service::get_local_migration_manager()`.
- CQL statements would check for access and manage users through static
functions in `auth::auth`. These functions would access the global
authenticator and authorizer instances and depended on the necessary
systems being started before they were used.
This change eliminates global state from all of these.
The specific changes are:
- Move out `allow_all_authenticator` and `allow_all_authorizer` into
their own files so that they're constructed like any other
authenticator or authorizer.
- Delete `auth.hh` and `auth.cc`. Constants and helper functions useful
for implementing functionality in the `auth` module have moved to
`common.hh`.
- Remove silent global dependency in
`auth::authenticated_user::is_super()` on the auth* service in favour
of a new function `auth::is_super_user()` with an explicit auth*
service argument.
- Remove global authenticator and authorizer instances, as well as the
`setup()` functions.
- Expose dependency on the auth* service in
`auth::authorizer::authorize()` and `auth::authorizer::list()`, which
is necessary to check for superuser status.
- Add an explicit `service::migration_manager` argument to the
authenticators and authorizers so they can announce metadata tables.
- The permissions cache now requires an auth* service reference instead
of just an authorizer since authorizing also requires this.
- The permissions cache configuration can now easily be created from the
DB configuration.
- Move the static functions in `auth::auth` to the new `auth::service`.
Where possible, previously static resources like the `delayed_tasks`
are now members.
- Validating `cql3::user_options` requires an authenticator, which was
previously accessed globally.
- Instances of the auth* service are accessed through `external`
instances of `client_state` instead of globally. This includes several
CQL statements including `alter_user_statement`,
`create_user_statement`, `drop_user_statement`, `grant_statement`,
`list_permissions_statement`, `permissions_altering_statement`, and
`revoke_statement`. For `internal` `client_state`, this is `nullptr`.
- Since the `cql_server` is responsible for instantiating connections
and each connection gets a new `client_state`, the `cql_server` is
instantiated with a reference to the auth* service.
- Similarly, the Thrift server is now also instantiated with a reference
to the auth* service.
- Since the storage service is responsible for instantiating and
starting the sharded servers, it is instantiated with the sharded
auth* service which it threads through. All relevant factory functions
have been updated.
- The storage service is still responsible for starting the auth*
service it has been provided, and shutting it down.
- The `cql_test_env` is now instantiated with an instance of the auth*
service, and can be accessed through a member function.
- All unit tests have been updated and pass.
Fixes#2929.
