Tablets load balancer is unable to process more than a single pending
replica, thus ALTER tablets KS cannot accept an ALTER statement which
would result in creating 2+ pending replicas, hence it has to validate
if the sum of absoulte differences of RFs specified in the statement is
not greter than 1.
(cherry picked from commit ee56bbfe61)
A bug has been discovered while trying to ALTER tablets KS and
specifying only 1 out of 2 DCs - the not specified DC's RF has been
zeroed. This is because ALTER tablets KS updated the KS only with the
RF-per-DC mapping specified in the ALTER tablets KS statement, so if a
DC was ommitted, it was assigned a value of RF=0.
This commit fixes that plus additionally passes all the KS options, not
only the replication options, to the topology coordinator, where the KS
update is performed.
`initial_tablets` is a special case, which requires a special handling
in the source code, as we cannot simply update old initial_tablet's
settings with the new ones, because if only ` and TABLETS = {'enabled':
true}` is specified in the ALTER tablets KS statement, we should not zero the `initial_tablets`, but
rather keep the old value - this is tested by the
`test_alter_preserves_tablets_if_initial_tablets_skipped` testcase.
Other than that, the above mentioned testcase started to fail with
these changes, and it appeared to be an issue with the test not waiting
until ALTER is completed, and thus reading the old value, hence the
test's body has been modified to wait for ALTER to complete before
performing validation.
(cherry picked from commit 2aabe7f09c)
ALTER tablets KS validated if RF is not changed by more than 1 for DCs
that already had replicas, but not for DCs that didn't have them yet, so
specifying an RF jump from 0 to 2 was possible when listing a new DC in
ALTER tablets KS statement, which violated internal invariants of
tablets load balancer.
This PR fixes that bug and adds a multi-dc testcases to check if adding
replicas to a new DC and removing replicas from a DC is honoring the RF
change constraints.
Refs: #20039
(cherry picked from commit 47acdc1f98)
1. Renamed the testcase to emphasize that it only focuses on testing
changing RF - there are other tests that test ALTER tablets KS
in general.
2. Fixed whitespaces according to PEP8
(cherry picked from commit adf453af3f)
`change_default_rf` is not used anywhere, moreover it uses
`replication_factor` tag, which is forbidden in ALTER tablets KS
statement.
(cherry picked from commit 042825247f)
There are two bits that control whenter replication strategy for a
keyspace will use tablets or not -- the configuration option and CQL
parameter. This patch tunes its parsing to implement the logic shown
below:
if (strategy.supports_tablets) {
if (cql.with_tablets) {
if (cfg.enable_tablets) {
return create_keyspace_with_tablets();
} else {
throw "tablets are not enabled";
}
} else if (cql.with_tablets = off) {
return create_keyspace_without_tablets();
} else { // cql.with_tablets is not specified
if (cfg.enable_tablets) {
return create_keyspace_with_tablets();
} else {
return create_keyspace_without_tablets();
}
}
} else { // strategy doesn't support tablets
if (cql.with_tablets == on) {
throw "invalid cql parameter";
} else if (cql.with_tablets == off) {
return create_keyspace_without_tablets();
} else { // cql.with_tablets is not specified
return create_keyspace_without_tablets();
}
}
closes: #20088
In order to enable tablets "by default" for NetworkTopologyStrategy
there's explicit check near ks_prop_defs::get_initial_tablets(), that's
not very nice. It needs more care to fix it, e.g. provide feature
service reference to abstract_replication_strategy constructor. But
since ks_prop_defs code already highjacks options specifically for that
strategy type (see prepare_options() helper), it's OK for now.
There's also #20768 misbehavior that's preserved in this patch, but
should be fixed eventually as well.
Signed-off-by: Pavel Emelyanov <xemul@scylladb.com>
(cherry picked from commit ebedc57300)
Closesscylladb/scylladb#20927
Fixes#20862
With the change in 60af2f3cb2 the bookkeep
for buffer memory was changed subtly, the problem here that we would
shrink buffer size before we after flush use said buffer's size to
decrement the buffer_list_bytes value, previously inc:ed by the full,
allocated size. I.e. we would slowly grow this value instead of adjusting
properly to actual used bytes.
Test included.
(cherry picked from commit ee5e71172f)
Closesscylladb/scylladb#20902
This fixes a use-after-free bug when parsing clustering key across
pages.
Also includes a fix for allocating section retry, which is potentially not safe (not in practice yet).
Details of the first problem:
Clustering key index lookup is based on the index file page cache. We
do a binary search within the index, which involves parsing index
blocks touched by the algorithm. Index file pages are 4 KB chunks
which are stored in LSA.
To parse the first key of the block, we reuse clustering_parser, which
is also used when parsing the data file. The parser is stateful and
accepts consecutive chunks as temporary_buffers. The parser is
supposed to keep its state across chunks.
In 93482439, the promoted index cursor was optimized to avoid
fully page copy when parsing index blocks. Instead, parser is
given a temporary_buffer which is a view on the page.
A bit earlier, in b1b5bda, the parser was changed to keep shared
fragments of the buffer passed to the parser in its internal state (across pages)
rather than copy the fragments into a new buffer. This is problematic
when buffers come from page cache because LSA buffers may be moved
around or evicted. So the temporary_buffer which is a view on the LSA
buffer is valid only around the duration of a single consume() call to
the parser.
If the blob which is parsed (e.g. variable-length clustering key
component) spans pages, the fragments stored in the parser may be
invalidated before the component is fully parsed. As a result, the
parsed clustering key may have incorrect component values. This never
causes parsing errors because the "length" field is always parsed from
the current buffer, which is valid, and component parsing will end at
the right place in the next (valid) buffer.
The problematic path for clustering_key parsing is the one which calls
primitive_consumer::read_bytes(), which is called for example for text
components. Fixed-size components are not parsed like this, they store
the intermediate state by copying data.
This may cause incorrect clustering keys to be parsed when doing
binary search in the index, diverting the search to an incorrect
block.
Details of the solution:
We adapt page_view to a temporary_buffer-like API. For this, a new concept
is introduced called ContiguousSharedBuffer. We also change parsers so that
they can be templated on the type of the buffer they work with (page_view vs
temporary_buffer). This way we don't introduce indirection to existing algorithms.
We use page_view instead of temporary_buffer in the promoted
index parser which works with page cache buffers. page_view can be safely
shared via share() and stored across allocating sections. It keeps hold to the
LSA buffer even across allocating sections by the means of cached_file::page_ptr.
Fixes#20766
(cherry picked from commit 8aca93b3ec)
(cherry picked from commit ac823b1050)
(cherry picked from commit 93bfaf4282)
(cherry picked from commit c0fa49bab5)
(cherry picked from commit 29498a97ae)
(cherry picked from commit c15145b71d)
(cherry picked from commit 7670ee701a)
(cherry picked from commit c09fa0cb98)
(cherry picked from commit 0279ac5faa)
(cherry picked from commit 8e54ecd38e)
(cherry picked from commit b5ae7da9d2)
Refs #20837Closesscylladb/scylladb#20905
* github.com:scylladb/scylladb:
sstables: bsearch_clustered_cursor: Add trace-level logging
sstables: bsearch_clustered_cursor: Move definitions out of line
test, sstables: Verify parsing stability when allocating section is retried
test, sstables: Verify parsing stability when buffers cross page boundary
sstables: bsearch_clustered_cursor: Switch parsers to work with page_view
cached_file: Adapt page_view to ContiguousSharedBuffer
cached_file: Change meaning of page_view::_size to be relative to _offset rather than page start
sstables, utils: Allow parsers to work with different buffer types
sstables: promoted_index_block_parser: Make reset() always bring parser to initial state
sstables: bsearch_clustered_cursor: Switch read_block_offset() to use the read() method
sstables: bsearch_clustered_cursor: Fix parsing when allocating section is retried
Before 17f4a151ce the node was marked as
been replaced in join_group0 state, before it actually joins the group0,
so by the time it actually joins and starts transferring snapshot/log no
traffic is sent to it. The commit changed this to mark the node as
being replaced after the snapshot/log is already transferred so we can
get the traffic to the node while it sill did not caught up with a
leader and this may causes problems since the state is not complete.
Mark the node as being replaced earlier, but still add the new node to
the topology later as the commit above intended.
Fixes: https://github.com/scylladb/scylladb/issues/20629
Need to be backported since this is a regression
(cherry picked from commit 644e7a2012)
(cherry picked from commit c0939d86f9)
(cherry picked from commit 1b4c255ffd)
Refs #20743Closesscylladb/scylladb#20829
* github.com:scylladb/scylladb:
test: amend test_replace_reuse_ip test to check that there is no stale writes after snapshot transfer starts
topology coordinator:: mark node as being replaced earlier
topology coordinator: do metadata barrier before calling finish_accepting_node() during replace
This PR addresses multiple issues with alternator batch metrics:
1. Rename the metrics to scylla_alternator_batch_item_count with op=BatchGetItem/BatchWriteItem
2. The batch size calculation was wrong and didn't count all items in the batch.
3. Add a test to validate that the metrics values increase by the correct value (not just increase). This also requires an addition to the testing to validate ops of different metrics and an exact value change.
Needs backporting to allow the monitoring to use the correct metrics names.
Fixes#20571
(cherry picked from commit 515857a4a9)
(cherry picked from commit 905408f764)
(cherry picked from commit 4d57a43815)
(cherry picked from commit 8dec292698)
Refs #20646Closesscylladb/scylladb#20758
* github.com:scylladb/scylladb:
alternator:test_metrics test metrics for batch item count
alternator:test_metrics Add validating the increased value
alternator: Fix item counting in batch operations
Alterntor rename batch item count metrics
The test performs consecutive schema changes in RECOVERY mode. The
second change relies on the first. However the driver might route the
changes to different servers and we don't have group 0 to guarantee
linearizability. We must rely on the first change coordinator to push
the schema mutations to other servers before returning, but that only
happens when it sees other servers as alive when doing the schema
change. It wasn't guaranteed in the test. Fix this.
Fixesscylladb/scylladb#20791
Should be backported to all branches containing this test to reduce
flakiness.
(cherry picked from commit f390d4020a)
Closesscylladb/scylladb#20807
In the current scenario, We check if a node being removed is normal
on the node initiating the removenode request. However, we don't have a
similar check on the topology coordinator. The node being removed could be
normal when we initiate the request, but it doesn't have to be normal when
the topology coordinator starts handling the request.
For example, the topology coordinator could have removed this node while handling
another removenode request that was added to the request queue earlier.
This commit intends to fix this issue by adding more checks in the enqueuing phase
and return errors for duplicate requests for node removal.
This PR fixes a bug. Hence we need to backport it.
Fixes: scylladb/scylladb#20271
(cherry picked from commit b25b8dccbd)
Closesscylladb/scylladb#20799
This patch adds tests for the batch operations item count.
The tests validate that the metrics tracking the number of items
processed in a batch increase by the correct amount.
Signed-off-by: Amnon Heiman <amnon@scylladb.com>
(cherry picked from commit 8dec292698)
The `check_increases_operation` now allows override the checked metric.
Additionally, a custom validation value can now be passed, which make it
possible to validate the amount by which a value has changed, rather
than just validating that the value increased.
The default behavior of validating that values have increased remains
unchanged, ensuring backward compatibility.
Signed-off-by: Amnon Heiman <amnon@scylladb.com>
(cherry picked from commit 4d57a43815)
Allow create_pending_deletion_log to delete a bunch of sstables
potentially resides in different prefixes (e.g. in the base directory
and under staging/).
The motivation arises from table::cleanup_tablet that calls compaction_group::cleanup on all cg:s via cleanup_compaction_groups. Cleanup, in turn, calls delete_sstables_atomically on all sstables in the compaction_group, in all states, including the normal state as well as staging - hence the requirement to support deleting sstables in different sub-directories.
Also, apparently truncate calls delete_atomically for all sstables too, via table::discard_sstables, so if it happened to be executed during view update generation, i.e. when there are sstables in staging, it should hit the assertion failure reported in https://github.com/scylladb/scylladb/issues/18862 as well (although I haven't seen it yet, but I see no reason why it would happen). So the issue was apparently present since the initial implementation of the pending_delete_log. It's just that with tablet migration it is more likely to be hit.
Fixesscylladb/scylladb#18862
Needs backport to 6.0 since tablets require this capability
Closesscylladb/scylladb#19555
* github.com:scylladb/scylladb:
sstable_directory: create_pending_deletion_log: place pending_delete log under the base directory
sstables: storage: keep base directory in base class
sstables: storage: define opened_directory in header file
sstable_directory: use only dirlog
Cleanup of a deallocated tablet throws an exception.
Since failed cleanup is retried, we end up in an infinite loop.
Ignore cleanup of deallocated storage groups.
Fixes: #19752.
Needs to be backported to all branches with tablets (6.0 and later)
Closesscylladb/scylladb#20584
* github.com:scylladb/scylladb:
test: check if cleanup of deallocated sg is ignored
replica: ignore cleanup of deallocated storage group
If a regular row isn't present, no regular column restriction
(say, r=3) can pass since all regular columns are presented as NULL,
and we don't have an IS NULL predicate. Yet we just ignore it.
Handle the restriction on a missing column by return false, signifying
the row was filtered out.
We have to move the check after the conditional checking whether there's
any restriction at all, otherwise we exit early with a false failure.
Unit test marked xfail on this issue are now unmarked.
A subtest of test_tombstone_limit is adjusted since it depended on this
bug. It tested a regular column which wasn't there, and this bug caused
the filter to be ignored. Change to test a static column that is there.
A test for a bug found while developing the patch is also added. It is
also tested by test_tombstone_limit, but better to have a dedicated test.
Fixes#10357Closesscylladb/scylladb#20486
This option was silently broken when --enable-tablet's default changed
from false to true. The reason is that when --vnodes is passed, run only
removes --enable-tablets=true from scylla's command line. With the new
default this is not enough, we need to explicitely disable tablets to
override the default.
Closesscylladb/scylladb#20462
This is a translation of Cassandra's CQL unit test source file
OperationFctsTest.java into our cql-pytest framework.
This is a massive test suite (over 800 lines of code) for Cassandra's
"arithmetic operators" CQL feature (CASSANDRA-11935), which was added
to Cassandra almost 8 years ago (and reached Cassandra 4.0), but we
never implemented it in Scylla.
All of the tests in suite fail in ScyllaDB due to our lack of this
feature:
Refs #2693: Support arithmetic operators
One test also discovered a new issue:
Refs #20501: timestamp column doesn't allow "UTC" in string format
All the tests pass on Cassandra.
Some of the tests insist on specific error message strings and specific
precision for decimal arithmetic operations - where we may not necessarily
want to be 100% compatible with Cassandra in our eventual implementation.
But at least the test will allow us to make deliberate - and not accidental -
deviations from compatibility with Cassandra.
Signed-off-by: Nadav Har'El <nyh@scylladb.com>
Closesscylladb/scylladb#20502
This function was obsoleted by schema_builder some time ago. Not to patch all its callers, that helper became wrapper around it. Remained users are all in tests, and patching the to use builder directory makes the code shorter in many cases.
Closesscylladb/scylladb#20466
* github.com:scylladb/scylladb:
schema: Ditch make_shared_schema() helper
test: Tune up indentation in uncompressed_schema()
test: Make tests use schema_builder instead of make_shared_schema
Since #14152 creation of an sstable takes table dir and its state. The
test in question wants to create and sstable in upload/ subdir and for
that it used to maintain full "cf.dir/upload" path, which is not
required any more.
Signed-off-by: Pavel Emelyanov <xemul@scylladb.com>
Closesscylladb/scylladb#20514
When purging regular tombstone consult the min_live_timestamp, if available.
This is safe since we don't need to protect dead data from resurrection, as it is already dead.
For shadowable_tombstones, consult the min_memtable_live_row_marker_timestamp,
if available, otherwise fallback to the min_live_timestamp.
If we see in a view table a shadowable tombstone with time T, then in any row where the row marker's timestamp is higher than T the shadowable tombstone is completely ignored and it doesn't hide any data in any column, so the shadowable tombstone can be safely purged without any effect or risk resurrecting any deleted data.
In other words, rows which might cause problems for purging a shadowable tombstone with time T are rows with row markers older or equal T. So to know if a whole sstable can cause problems for shadowable tombstone of time T, we need to check if the sstable's oldest row marker (and not oldest column) is older or equal T. And the same check applies similarly to the memtable.
If both extended timestamp statistics are missing, fallback to the legacy (and inaccurate) min_timestamp.
Fixesscylladb/scylladb#20423Fixesscylladb/scylladb#20424
> [!NOTE]
> no backport needed at this time
> We may consider backport later on after given some soak time in master/enterprise
> since we do see tombstone accumulation in the field under some materialized views workloads
Closesscylladb/scylladb#20446
* github.com:scylladb/scylladb:
cql-pytest: add test_compaction_tombstone_gc
sstable_compaction_test: add mv_tombstone_purge_test
sstable_compaction_test: tombstone_purge_test: test that old deleted data do not inhibit tombstone garbage collection
sstable_compaction_test: tombstone_purge_test: add testlog debugging
sstable_compaction_test: tombstone_purge_test: make_expiring: use next_timestamp
sstable, compaction: add debug logging for extended min timestamp stats
compaction: get_max_purgeable_timestamp: use memtable and sstable extended timestamp stats
compaction: define max_purgeable_fn
tombstone: can_gc_fn: move declaration to compaction_garbage_collector.hh
sstables: scylla_metadata: add ext_timestamp_stats
compaction_group, storage_group, table_state: add extended timestamp stats getters
sstables, memtable: track live timestamps
memtable_encoding_stats_collector: update row_marker: do nothing if missing
A CreateTable request defines the KeySchema of the base table and each
of its GSIs and LSIs. It also needs to give an AttributeDefinition for
each attribute used in a KeySchema - which among other things specifies
this attribute's type (e.g., S, N, etc.). Other, non-key, attributes *do
not* have a specified type, and accordingly must not be mentioned in
AttributeDefinitions.
Before this patch, Alternator just ignored unused AttributeDefinitions
entries, whereas DynamoDB throws an error in this case. This patch fixes
Alternator's behavior to match DynamoDB's - and adds a test to verify this.
Besides being more error-path-compatible with DynamoDB, this extra check
can also help users: We already had one user complaining that an
AttributeDefinitions setting he was using was ignored, not realizing
that it wasn't used by any KeySchema. A clear error message would have
saved this user hours of investigation.
Fixes#19784.
Signed-off-by: Nadav Har'El <nyh@scylladb.com>
Closesscylladb/scylladb#20378
add test for issue when writes in commitlog segments pinned to another table can be resurrected.
This test based on dtest code published in #14870 and adapted for community version.
It's a regression test for #15060 fix and should fail before this patch and succeed afterwards.
Refs #14870, #15060Closesscylladb/scylladb#20331
before this change, we rely on `using namespace seastar` to use
`seastar::format()` without qualifying the `format()` with its
namespace. this works fine until we changed the parameter type
of format string `seastar::format()` from `const char*` to
`fmt::format_string<...>`. this change practically invited
`seastar::format()` to the club of `std::format()` and `fmt::format()`,
where all members accept a templated parameter as its `fmt`
parameter. and `seastar::format()` is not the best candidate anymore.
despite that argument-dependent lookup (ADT for short) favors the
function which is in the same namespace as its parameter, but
`using namespace` makes `seastar::format()` more competitive,
so both `std::format()` and `seastar::format()` are considered
as the condidates.
that is what is happening scylladb in quite a few caller sites of
`format()`, hence ADT is not able to tell which function the winner
in the name lookup:
```
/__w/scylladb/scylladb/mutation/mutation_fragment_stream_validator.cc:265:12: error: call to 'format' is ambiguous
265 | return format("{} ({}.{} {})", _name_view, s.ks_name(), s.cf_name(), s.id());
| ^~~~~~
/usr/bin/../lib/gcc/x86_64-redhat-linux/14/../../../../include/c++/14/format:4290:5: note: candidate function [with _Args = <const std::basic_string_view<char> &, const seastar::basic_sstring<char, unsigned int, 15> &, const seastar::basic_sstring<char, unsigned int, 15> &, const utils::tagged_uuid<table_id_tag> &>]
4290 | format(format_string<_Args...> __fmt, _Args&&... __args)
| ^
/__w/scylladb/scylladb/seastar/include/seastar/core/print.hh:143:1: note: candidate function [with A = <const std::basic_string_view<char> &, const seastar::basic_sstring<char, unsigned int, 15> &, const seastar::basic_sstring<char, unsigned int, 15> &, const utils::tagged_uuid<table_id_tag> &>]
143 | format(fmt::format_string<A...> fmt, A&&... a) {
| ^
```
in this change, we
change all `format()` to either `fmt::format()` or `seastar::format()`
with following rules:
- if the caller expects an `sstring` or `std::string_view`, change to
`seastar::format()`
- if the caller expects an `std::string`, change to `fmt::format()`.
because, `sstring::operator std::basic_string` would incur a deep
copy.
we will need another change to enable scylladb to compile with the
latest seastar. namely, to pass the format string as a templated
parameter down to helper functions which format their parameters.
to miminize the scope of this change, let's include that change when
bumping up the seastar submodule. as that change will depend on
the seastar change.
Signed-off-by: Kefu Chai <kefu.chai@scylladb.com>
This PR introduces a new file data source implementation for uncompressed SSTables that will be validating the checksum of each chunk that is being read. Unlike for compressed SSTables, checksum validation for uncompressed SSTables will be active for scrub/validate reads but not for normal user reads to ensure we will not have any performance regression.
It consists of:
* A new file data source for uncompressed SSTables.
* Integration of checksums into SSTable's shareable components. The validation code loads the component on demand and manages its lifecycle with shared pointers.
* A new `integrity_check` flag to enable the new file data source for uncompressed SSTables. The flag is currently enabled only through the validation path, i.e., it does not affect normal user reads.
* New scrub tests for both compressed and uncompressed SSTables, as well as improvements in the existing ones.
* A change in JSON response of `scylla validate-checksums` to report if an uncompressed SSTable cannot be validated due to lack of checksums (no `CRC.db` in `TOC.txt`).
Refs #19058.
New feature, no backport is needed.
Closesscylladb/scylladb#20207
* github.com:scylladb/scylladb:
test: Add test to validate SSTables with no checksums
tools: Fix typo in help message of scylla validate-checksums
sstables: Allow validate_checksums() to report missing checksums
test: Add test for concurrent scrub/validate operations
test: Add scrub/validate tests for uncompressed SSTables
test/lib: Add option to create uncompressed random schemas
test: Add test for scrub/validate with file-level corruption
test: Check validation errors in scrub tests
sstables: Enable checksum validation for uncompressed SSTables
sstables: Expose integrity option via crawling mutation readers
sstables: Expose integrity option via data_consume_rows()
sstables: Add option for integrity check in data streams
sstables: Remove unused variable
sstables: Add checksum in the SSTable components
sstables: Introduce checksummed file data source implementation
sstables: Replace assert with on_internal_error
Fixes#20543
In cql_test_env, if cfg_in.ms_listen is set, we try to get a free port for the current test on
which message service rpc can bind. This to allow multiple tests in parallel.
However, we just do this by using random and getting a number, not actually verifying it against
host ports in use.
This is complicated further by the fact that port reuse is effectively disabled in seastar
(see reactor::posix_reuseport_detect()). Due to this, the solution applied here is a combo
of
* Create temp socket with port = 0 to get a previously free port
* Close socket right before listen (to handle reuse not working)
* Retry on EADDRINUSE
Closesscylladb/scylladb#20547
Migrate the `system_distributed.view_build_status` table to `system.view_build_status_v2`. The writes to the v2 table are done via raft group0 operations.
The new parameter `view_builder_version` stored in `scylla_local` indicates whether nodes should use the old or the new table.
New clusters use v2. Otherwise, the migration to v2 is initiated by the topology coordinator when the feature is enabled. It reads all the rows from the old table and writes them to the new table, and sets `view_builder_version` to v2. When the change is applied, all view_builder services are updated to write and read from the v2 table.
The old table `system_distributed.view_build_status` is set to read virtually from the new table in order to maintain compatibility.
When removing a node from the cluster, we remove its rows from the table atomically (fixes https://github.com/scylladb/scylladb/issues/11836). Also, during the migration, we remove all invalid rows.
Fixesscylladb/scylladb#15329
dtest https://github.com/scylladb/scylla-dtest/pull/4827Closesscylladb/scylladb#19745
* github.com:scylladb/scylladb:
view: test view_build_status table with node replace
test/pylib: use view_build_status_v2 table in wait_for_view
view_builder: common write view_build_status function
view_builder: improve migration to v2 with intermediate phase
view: delete node rows from view_build_status on node removal
view: sanitize view_build_status during migration
view: make old view_build_status table a virtual table
replica: move streaming_reader_lifecycle_policy to header file
view_builder: test view_build_status_v2
storage_service: add view_build_status to raft snapshot
view_builder: migration to v2
db:system_keyspace: add view_builder_version to scylla_local
view_builder: read view status from v2 table
view_builder: introduce writing status mutations via raft
view_builder: pass group0_client and qp to view_builder
view_builder: extract sys_dist status operations to functions
db:system_keyspace: add view_build_status_v2 table
In a previous patch we extended the return status of
`sstables::validate_checksums()` to report if an SSTable cannot be
validated due to a missing CRC component (i.e., CRC.db does not appear
in TOC.txt).
Add a test case for this.
Signed-off-by: Nikos Dragazis <nikolaos.dragazis@scylladb.com>
Change the return type of `sstable::validate_checksums()` from binary
(valid/invalid) to a ternary (valid/invalid/no_checksums). The third
status represents uncompressed SSTables without a CRC component (no
entry for CRC.db in the TOC).
Also, change the JSON response of `sstable validate-checksums` to expose
the new status. Replace the boolean value for valid/invalid checksums
with an object that contains two boolean keys: one that indicates if the
SSTable has checksums, and one that indicates if the checksums are valid
or not. The second key is optional and appears only if the SSTable has
checksums.
Finally, update the documentation to reflect the changes in the API.
Signed-off-by: Nikos Dragazis <nikolaos.dragazis@scylladb.com>
Theoretically it is possible to launch more than one scrub instances
simultaneously. Since the checksum component is a shared resource,
accesses have to be synchronized.
Add a test that launches two scrub operations in validate mode and
ensures that the checksum component is loaded once, referenced by all
scrub instances via shared pointers, and deleted once the scrub
operations finish. Introduce an injection point to achieve concurrent
execution of scrubs.
Signed-off-by: Nikos Dragazis <nikolaos.dragazis@scylladb.com>
Currently the unit tests check scrub in validate mode against compressed
SSTables only. Mirror the tests for uncompressed SSTables as well.
Signed-off-by: Nikos Dragazis <nikolaos.dragazis@scylladb.com>
Extend the `random_schema_specification` to support creating both
compressed and uncompressed schemas.
Signed-off-by: Nikos Dragazis <nikolaos.dragazis@scylladb.com>
Currently, we test scrub/validate only against a corrupted SSTable with
content-level corruption (out-of-order partition key).
Add a test for file-level corruption as well. This should trigger the
checksum check in the underlying compressed file data source
implementation.
Signed-off-by: Nikos Dragazis <nikolaos.dragazis@scylladb.com>
Scrub was extended in PR #11074 to report validation errors but the
unit tests were not updated.
Update the tests to check the validation errors reported by scrub.
Validation errors must be zero for valid SSTables and non-zero for
invalid SSTables.
Signed-off-by: Nikos Dragazis <nikolaos.dragazis@scylladb.com>
The `database::get_all_tables_flushed_at` method returns a variable
without setting the computed all_tables_flushed_at value. This causes
its caller, `maybe_flush_all_tables` to flush all the tables everytime
regardless of when they were last flushed. Fix this by returning
the computed value from `database::get_all_tables_flushed_at`.
Fixes#20301
Requires a backport to 6.0 and 6.1 as they have the same issue.
Closesscylladb/scylladb#20471
* github.com:scylladb/scylladb:
cql-pytest: add test to verify compaction_flush_all_tables_before_major_seconds config
database::get_all_tables_flushed_at: fix return value
Test tombstone garbage collection with:
1. conflicting live data in memtable (verifying there is no regression
in this area)
2. deletion in memtable (reproducing scylladb/scylladb#20423)
3. materialized view update in memtable (reproducing scylladb/scylladb#20424)
in materialized_views
Signed-off-by: Benny Halevy <bhalevy@scylladb.com>
