Nowadays if memtable gets flushed into misconfigured S3 storage, the flush fails and aborts the whole scylla process. That's not very elegant. First, because upon restart garbage collecting non-sealed sstables would fail again. Second, because re-configuring an endpoint can be done runtime, scylla re-reads this config upon HUP signal.
Flushing memtable restarts when seeing ENOSPC/EDQUOT errors from on-disk sstables. This PR extends this to handle misconfigured S3 endpoints as well.
fixes: #13745Closesscylladb/scylladb#15635
* github.com:scylladb/scylladb:
test: Add object_store test to validate config reloading works
test: Add config update facility to test cluster
test: Make S3_Server export config file as pathlib.Path
config: Make object storage config updateable_value_source
memtable: Extend list of checking codes
sstables/storage/s3: Fix missing TOC status check
s3/client: Map http exceptions into storage_io_error
exceptions: Extend storage_io_error construction options
There is a need for sending tablet info to the drivers so they can be tablet aware. For the best performance we want to get this info lazily only when it is needed.
The info is send when driver asks about the information that the specific tablet contains and it is directed to the wrong node/shard so it could use that information for every subsequent query. If we send the query to the wrong node/shard, we want to send the RESULT message with additional information about the tablet (replicas and token range) in custom_payload.
Mechanism for sending custom_payload added.
Sending custom_payload tested using three node cluster and cqlsh queries. I used RF=1 so choosing wrong node was testable.
I also manually tested it with the python-driver and confirmed that the tablet info can be deserialized properly.
Automatic tests added.
Closesscylladb/scylladb#15410
* github.com:scylladb/scylladb:
docs: add documentation about sending tablet info to protocol extensions
Add tests for sending tablet info
cql3: send tablet if wrong node/shard is used during modification statement
cql3: send tablet if wrong node/shard is used during select statement
locator: add function to check locality
locator: add function to check if host is local
transport: add function to add tablet info to the result_message
transport: add support for setting custom payload
This PR contains two patches which get rid of unnecessary sleeps on cql_test_env teardown greatly reducing run time of tests.
Reduces run time of `build/dev/test/boost/schema_change_test` from 90s to 6s.
Closesscylladb/scylladb#16111
* github.com:scylladb/scylladb:
test: cql_test_env: Interrupt all components on cql_test_env teardown
tests: cql_test_env: Skip gossip shutdown sleep
Currently storage service starts too early and its initialization is split into several steps. This PR makes storage service start "late enough" and makes its initialization (minimally required before joining cluster) happen in on place.
refs: #2795
refs: #2737Closesscylladb/scylladb#16103
* github.com:scylladb/scylladb:
storage_service: Drop (un)init_messaging_service_part() pair
storage_service: Init/Deinit RPC handlers in constructor/stop
storage_service: Dont capture container() on RPC handler
storage_service: Use storage_service::_sys_dist_ks in some places
storage_service: Add explicit dependency on system dist. keyspace
storage_service: Rurn query processor pointer into reference
storage_service: Add explicity query_processor dependency
main: Start storage service later
Now its plain updateable_value, but without the ..._source object the
updateable_value is just a no-op value holder. In order for the
observers to operate there must be the value source, updating it would
update the attached updateable values _and_ notify the observers.
In order for the config to be the u.v._source, config entries should be
comparable to each other, thus the <=> operator for it
Signed-off-by: Pavel Emelyanov <xemul@scylladb.com>
This should interrupt all sleeps in component teardown.
Before this patch, there was a 1s sleep on gossiper shutdown, which I
don't know where it comes from. After the patch there is no such
sleep.
The wrapper just calls the test-only core write_memtable_to_sstable()
overload, tests can do it on their own.
Signed-off-by: Pavel Emelyanov <xemul@scylladb.com>
This effectively reverts bc051387c5 (storage_service: Remove sys_dist_ks
from storage_service dependencies) since now storage service needs the
sys. disk. ks not only cluster join time. Next patch will make more use
of it as well.
Signed-off-by: Pavel Emelyanov <xemul@scylladb.com>
It's now set via a dedicated call that happens after query processor is
started. Now query processor is started before storage service and the
latter can get the q.p. local reference via constructor.
Signed-off-by: Pavel Emelyanov <xemul@scylladb.com>
This class only provides a .run() method which allocates a task and
calls sstables::test_env::perform_compaction(). This can be done in a
helper method, no need for the whole class for it.
Signed-off-by: Pavel Emelyanov <xemul@scylladb.com>
Take it from compaction_manager_test::run() which is simplified overwite
of the compaction_manager::perform_compaction().
Signed-off-by: Pavel Emelyanov <xemul@scylladb.com>
The method is the simplified rewrite of the compaction_manager's
perform_compaction() one, but it makes task registration and
unregistration to hard way. Keep it shorter and simpler resembling the
compaction_manager's prototype.
Signed-off-by: Pavel Emelyanov <xemul@scylladb.com>
Now the one sitting in utils is only called from its peer in compaction
test. Things get simpler if they get merged.
Signed-off-by: Pavel Emelyanov <xemul@scylladb.com>
They both have the same scope, but keeping it on the task frees the
caller from the need to mess with its private fields. For now it's not a
problem, but it will be critical in one of the next patches.
Signed-off-by: Pavel Emelyanov <xemul@scylladb.com>
The purpose of this method is to turn public the private
compaction_manager method of the same name. The caller of this method is
having sstable_test_env at hand with its test_env_compaction_manager, so
the de-private-isation call can be moved.
Signed-off-by: Pavel Emelyanov <xemul@scylladb.com>
There are two tests, test_read_all and test_read_with_partition_row_limits, which asserts on every page as well
as at the end that there are no misses whatsoever. This is incorrect, because it is possible that on a given page, not all shards participate and thus there won't be a saved reader on every shard. On the subsequent page, a shard without a reader may produce a miss. This is fine. Refine the asserts, to check that we have only as much misses, as many
shards we have without readers on them.
Fixes: https://github.com/scylladb/scylladb/issues/14087Closesscylladb/scylladb#15806
* github.com:scylladb/scylladb:
test/boost/multishard_mutation_query_test: fix querier cache misses expectations
test/lib/test_utils: add require_* variants for all comparators
The helper makes sstable, writes mutations into it and loads one. Internally it uses the make_memtable() helper that prepares a memtable out of a vector of mutations. There are many test cases that don't use these facilities generating some code duplication.
The make_sstable() wrapper around make_sstable_easy() is removed along the way.
Closesscylladb/scylladb#15930
* github.com:scylladb/scylladb:
tests: Use make_sstable_easy() where appropriate
sstable_conforms_to_mutation_source_test: Open-code the make_sstable() helper
sstable_mutation_test: Use make_sstable_easy() instead of make_sstable()
tests: Make use of make_memtable() helper
tests: Drop as_mutation_source helper
test/sstable_utils: Hide assertion-related manipulations into branch
helper
This test case is pretty special in the sense that it uses custom path
for tempdir to create, write and load sstable to/from. It's better to
open-code the make_sstable() helper into the test case rather than
encourage callers to use custom tempdirs. "Good" test cases can use
make_sstable_easy() for the same purposes (in fact they alredy do).
Signed-off-by: Pavel Emelyanov <xemul@scylladb.com>
There's one in the utils that creates lw_shared_ptr<memtable> and
applies provided vector of mutations into it. Lots of other test cases
do literally the same by hand.
The make_memtable() assumes that the caller is sitting in the seastar
thread, and all the test cases that can benfit from it already are.
Signed-off-by: Pavel Emelyanov <xemul@scylladb.com>
The make_sstable_containing() can validate the applied mutations are
produced by the resulting sstable if the callers asks for it. To do so
the mutations are merged prior to checking and this merging should only
happen if validation is requested, otherwise it just makes no sense.
Signed-off-by: Pavel Emelyanov <xemul@scylladb.com>
Now this wrapper is unused, all (both) test cases that needed it were
patched to use make_table_for_tests().
Signed-off-by: Pavel Emelyanov <xemul@scylladb.com>
Make it public and add `bool enable` flag so that test cases could start
the compaction manager (to call make_table_for_tests() later) but keep
it disabled for their testing purposes.
Signed-off-by: Pavel Emelyanov <xemul@scylladb.com>
Now when the sstables::test_env provides the compaction manager
instance, the table_for_tests can start using it and can remove c.m. and
the sidecar task_manager.
Signed-off-by: Pavel Emelyanov <xemul@scylladb.com>
Most of the test cases that use sstables::test_env do not mess with
table objects, they only need sstables. However, compaction test cases
do need table objects and, respectively, a compaction manager instance.
Today those test cases create compaction manager instance for each table
they create, but that's a bit heaviweight and doesn't work the way core
code works. This patch prepares the sstables::test_env to provide
compaction manager on demand by starting it as soon as it's asked to
create table object.
For now this compaction manager is unused, but it will be in next patch.
Signed-off-by: Pavel Emelyanov <xemul@scylladb.com>
Next patches will stop using compaction manager from table_for_tests in
favor of external one (spoiler: the one from sstables::test_env), thus
the compaction manager would outsurvive the table_for_tests object and
the table object wrapped by it. So in order for the table_for_tests to
stop correctly, it also needs to stop the wrapped table too.
Signed-off-by: Pavel Emelyanov <xemul@scylladb.com>
There's table_for_tests::get_compaction_manager() helper that's
excessive as compaction manager reference can be provided by the wrapped
table object itself.
Signed-off-by: Pavel Emelyanov <xemul@scylladb.com>
It's not used any longer and can be removed. This make table_for_tests
stopping code a bit shorter as well.
Signed-off-by: Pavel Emelyanov <xemul@scylladb.com>
This is the continuation of the previous patch. Make the caller of
table_for_tests constructor provide the table::config. This makes the
table_for_tests constructor shorter and more self-contained.
Also, the caller now needs to provide the reference to reader
concurrency semaphore, and that's good news, because the only caller for
today is the sstables::test_env that does have it. This makes the
semaphore sitting on table_for_tests itself unused and it will be
removed eventually.
Signed-off-by: Pavel Emelyanov <xemul@scylladb.com>
The table_for_tests keeps a copy of table::config on board. That's not
"idiomatic" as table config is a temporary object that should only be
needed while creating table object. Fortunately, the copy of config on
table_for_tests is no longer needed and it can be made temporary.
Signed-off-by: Pavel Emelyanov <xemul@scylladb.com>
Making compaction permit needs a semaphore. Current code gets it from
the table_for_tests, but the very same semaphore reference sits on the
table. So get it from table, as the core code does. This will allow
removing the dedicated semaphore from table_for_tests in the future.
Signed-off-by: Pavel Emelyanov <xemul@scylladb.com>
Making sstable for a table needs passing table directory as an argument.
Current table_for_tests's helper gets the directory from table config,
but the very same path sits on the table itself. This makes testing code
to construct sstable look closer to the core code and is also the
prerequisite for removing the table config from table_for_tests in the
future.
Signed-off-by: Pavel Emelyanov <xemul@scylladb.com>
When making table object it needs the cache tracker reference. The
table_for_tests keeps one on board, but the very same object already
sits on the sstables manager which has public getter.
This makes the table_for_tests's cache tracker object not needed.
Signed-off-by: Pavel Emelyanov <xemul@scylladb.com>
It's going to get larger, so better to move.
Also when coroutinized it's goind to be easier to extend.
Signed-off-by: Pavel Emelyanov <xemul@scylladb.com>
before this change, we create a new UUID for a new sstable managed by the s3_storage, and we use the string representation of UUID defined by RFC4122 like "0aa490de-7a85-46e2-8f90-38b8f496d53b" for naming the objects stored on s3_storage. but this representation is not what we are using for storing sstables on local filesystem when the option of "uuid_sstable_identifiers_enabled" is enabled. instead, we are using a base36-based representation which is shorter.
to be consistent with the naming of the sstables created for local filesystem, and more importantly, to simplify the interaction between the local copy of sstables and those stored on object storage, we should use the same string representation of the sstable identifier.
so, in this change:
1. instead of creating a new UUID, just reuse the generation of the sstable for the object's key.
2. do not store the uuid in the sstable_registry system table. As we already have the generation of the sstable for the same purpose.
3. switch the sstable identifier representation from the one defined by the RFC4122 (implemented by fmt::formatter<utils::UUID>) to the base36-based one (implemented by fmt::formatter<sstables::generation_type>)
Fixes#14175
Signed-off-by: Kefu Chai <kefu.chai@scylladb.com>
Closesscylladb/scylladb#14406
* github.com:scylladb/scylladb:
sstable: remove _remote_prefix from s3_storage
sstable: switch to uuid identifier for naming S3 sstable objects
default_compaction_progress_monitor returns a reference to a static
object. So, it should be read-only, but its users need to modify it.
Delete default_compaction_progress_monitor and use one's own
compaction_progress_monitor instance where it's needed.
Closesscylladb/scylladb#15800
before this change, we create a new UUID for a new sstable managed
by the s3_storage, and we use the string representation of UUID
defined by RFC4122 like "0aa490de-7a85-46e2-8f90-38b8f496d53b" for
naming the objects stored on s3_storage. but this representation is
not what we are using for storing sstables on local filesystem when
the option of "uuid_sstable_identifiers_enabled" is enabled. instead,
we are using a base36-based representation which is shorter.
to be consistent with the naming of the sstables created for local
filesystem, and more importantly, to simplify the interaction between
the local copy of sstables and those stored on object storage, we should
use the same string representation of the sstable identifier.
so, in this change:
1. instead of creating a new UUID, just reuse the generation of the
sstable for the object's key.
2. do not store the uuid in the sstable_registry system table. As
we already have the generation of the sstable for the same purpose.
3. switch the sstable identifier representation from the one defined
by the RFC4122 (implemented by fmt::formatter<utils::UUID>) to the
base36-based one (implemented by
fmt::formatter<sstables::generation_type>)
4. enable the `uuid_sstable_identifers` cluster feature if it is
enabled in the `test_env_config`, so that it the sstable manager
can enable the uuid-based uuid when creating a new uuid for
sstable.
5. throw if the generation of sstable is not UUID-based when
accessing / manipulating an sstable with S3 storage backend. as
the S3 storage backend now relies on this option. as, otherwise
we'd have sstables with key like s3://bucket/number/basename, which
is just unable to serve as a unique id for sstable if the bucket is
shared across multiple tables.
Fixes#14175
Signed-off-by: Kefu Chai <kefu.chai@scylladb.com>
