The current chunk size of 256 gives a 50% probability of a 128k read or
write getting split into two accesses. This reduces efficiency and
increases latency.
Change the chunk size to 1MB, with a 12% probability of cross-member
access.
Message-Id: <1476269082-2473-1-git-send-email-avi@scylladb.com>
Since Debian 8(jessie) does not provides g++-5, we frequently got compile error
because we are using older compiler.
To fix the problem, backport g++-5 from Debian 9(stretch).
Signed-off-by: Takuya ASADA <syuu@scylladb.com>
Message-Id: <1476694318-10640-3-git-send-email-syuu@scylladb.com>
On Debian, lsb_release -r returns the version number something like '8.6'.
However, on this script we want to check major version only.
Therefore we can use VERSION_ID from /etc/os-release which only contains
major version number.
Signed-off-by: Takuya ASADA <syuu@scylladb.com>
Message-Id: <1476694318-10640-2-git-send-email-syuu@scylladb.com>
The expected behaviour in the scylla_setup script is that a question
will be followed by the answer.
For example, after asking if the scylla should be run as a service the
relevant actions will be taken before the following question.
This patch address two such mis-orders:
1. the scylla-housekeeping depends on the scylla-server, but the
setup should first setup the scylla-server service and only then ask
(and install if needed) the scylla-housekeeping.
2. The node_exporter should be placed after the io_setup is done.
Fixes#1739
Signed-off-by: Amnon Heiman <amnon@scylladb.com>
Message-Id: <1476370098-25617-1-git-send-email-amnon@scylladb.com>
"This series address two issues that interfere with running the node_exporter as a service in ubuntu 16.
1. The service file should be packed in the deb file
2. When setting the node_exporter as a service it doesn't need to run with scylla use"
* 'amnon/node_exporter_ubuntu_v2' of github.com:cloudius-systems/seastar-dev:
node-exporter service: No need to run as scylla user
debian package: Include the node_exporter service file
the node-exporter does not need to run as scylla user. It can run
without scylla or without the scylla user being configure.
Signed-off-by: Amnon Heiman <amnon@scylladb.com>
The script mistakenly split value at "," when cpuset list is separated
by comma. Instead of matching possible patterns of the argument, let's
pass all characters until reach to space delimiter or end of line.
Fixes#1716
Signed-off-by: Takuya ASADA <syuu@scylladb.com>
Message-Id: <1476171037-32373-1-git-send-email-syuu@scylladb.com>
"The version is taken from the installation rather than the API, a mode command
line indicated that this is part of the setup and uuid is used for the
interaction with the checkversion server."
* 'amnon/check_version_on_startup_v3' of github.com:cloudius-systems/seastar-dev:
scylla_setup: Check and report the scylla version
scylla-housekeeping: check version during setup
In order to allow Scylla’s docker container to handle multiple network
interfaces, the start-scylla script was refactored:
- `$IP` is now called `$SCYLLA_LISTEN_ADDRESS`, so it is less likely to
be confused or interfere with other environment variables.
- `$SCYLLA_LISTEN_ADDRESS` now checks its value and also tries to
resolve a hostname, if no IP was set to it.
- `$SCYLLA_LISTEN_DEVICE` can now be set as environment variable and
contain any available NIC device name (e.g. `eth0`). The script
automatically retrieves the IP address from the device.
Usage:
1. With `$SCYLLA_LISTEN_ADDRESS` as IP:
`docker run -t -i --rm --name scylla -e SCYLLA_LISTEN_ADDRESS=192.168.1.100 scylladb/scylla`
2. With `$SCYLLA_LISTEN_ADDRESS` as hostname:
`docker run -t -i --rm --name scylla -e SCYLLA_LISTEN_ADDRESS=containername.network.lan scylladb/scylla`
3. With `$SCYLLA_LISTEN_DEVICE`:
`docker run -t -i --rm --name scylla -e SCYLLA_LISTEN_DEVICE=eth0 scylladb/scylla`
Message-Id: <20161003151230.67672-1-marius@twostairs.com>
This patch adds a call to the scylla-housekeeping check version during
setup, so a warning will be printed if a newer version is available.
Signed-off-by: Amnon Heiman <amnon@scylladb.com>
"The prometheus project and its sub project does not have RPM/DEB packaging yet,
but it does have binaries for download.
This series adds an installation script that download install and run as a
service the node_exporter. For os that uses systemd it has a spec file ready
that will be package with the system. For ubuntu a service file will be created
when running the installer.
After this series running node_exporter_install a node_exporter will be running
as a service on the machine."
When there's no free disk, it asks to select disks from empty list:
"Please select disks from following list:
type 'done' to finish selection. selected:"
We should avoid to ask it, abort RAID setup instead.
Fixes#1673
Signed-off-by: Takuya ASADA <syuu@scylladb.com>
Message-Id: <1474429218-28382-1-git-send-email-syuu@scylladb.com>
This adds the option to install node_exporter during setup.
The node_exporter export server information in the prometheus API.
It should be used when using the scylla prometheus API to get the server
information.
Signed-off-by: Amnon Heiman <amnon@scylladb.com>
This patch adds a service file for OS that supports systemd.
When started, it would run an already installed node_exporter or fail.
Signed-off-by: Amnon Heiman <amnon@scylladb.com>
node_exporter is a utility that export node information via prometheus
API. It takes care of host related metrics such as CPU and memory.
The install script, download the node_exporter binaries, create a link
in /usr/bin.
On OS with systemd supported it would enable and start the installed
service file to start as a service. On others (ubuntu) it would create a conf file and start it.
The installation should be done using sudo.
After a successful installation, the node_exporter would run as a
service.
Signed-off-by: Amnon Heiman <amnon@scylladb.com>
On instances differenet then i2/m3/c3 we provide instructions to run
scylla_ip_setup. Running scylla_io_setup requires access to
/var/lib/scylla to crate a temporary file. To gain access to that
directory the user should run 'sudo scylla_io_setup'.
refs: #1645
Signed-off-by: Shlomi Livne <shlomi@scylladb.com>
Message-Id: <4ce90ca1ba4da8f07cf8aa15e755675463a22933.1473935778.git.shlomi@scylladb.com>
On posix_net_conf.sh's single queue NIC mode (which means RPS enabled mode), we are excluded cpu0 and it's sibling from network stack processing cpus, and assigned NIC IRQ to cpu0.
So always network stack is not working on cpu0 and it's sibling, to get better performance we need to exclude these cpus from scylla too.
To do this, we need to get RPS cpu mask from posix_net_conf.sh, pass it to scylla_cpuset_setup to construct /etc/scylla.d/cpuset.conf when scylla_setup executed.
Signed-off-by: Takuya ASADA <syuu@scylladb.com>
Message-Id: <1472544875-2033-2-git-send-email-syuu@scylladb.com>
Right now scylla_prepare specifies -mq option to posix_net_conf.sh when number of RX queues > 1, but on posix_net_conf.sh it sets NIC mode to sq when queues < ncpus / 2.
So the logic is different, and actually posix_net_conf.sh does not need to specify -sq/-mq now, it autodetects queue mode.
So we need to drop detection logic from scylla_prepare, let posix_net_conf.sh to detect it.
Signed-off-by: Takuya ASADA <syuu@scylladb.com>
Message-Id: <1472544875-2033-1-git-send-email-syuu@scylladb.com>
Alexandr Porunov reports that Scylla fails to start up after reboot as follows:
Aug 25 19:44:51 scylla1 scylla[637]: Exiting on unhandled exception of type 'std::system_error': Error system:99 (Cannot assign requested address)
The problem is that because there's no dependency to network service,
Scylla simply attempts to start up too soon in the boot sequence and
fails.
Fixes#1618.
Message-Id: <1472212447-21445-1-git-send-email-penberg@scylladb.com>
To work around an SSL problem with Python on Ubuntu 14.04, we need to
use curl. Add it as a dependency so that it's available on the host.
Signed-off-by: Amnon Heiman <amnon@scylladb.com>
.in is the name for template files witch requires to rewrite on building time, but these systemd unit files does not require rewrite, so don't name .in, reference directly from .spec.
Signed-off-by: Takuya ASADA <syuu@scylladb.com>
Message-Id: <1471607533-3821-1-git-send-email-syuu@scylladb.com>
Move scylla-server and scylla-jmx supervisord config files to separate
files and make the main supervisord.conf scan /etc/supervisord.conf.d/
directory. This makes it easier for people to extend the Docker image
and add their own services.
Message-Id: <1471588406-25444-1-git-send-email-penberg@scylladb.com>
allow user to use the `supervisorctl' program to start and stop
services. `exec` needed to be added to the scylla and scylla-jmx starter
scripts - otherwise supervisord loses track of the actual process we
want to manage.
Signed-off-by: Yoav Kleinberger <yoav@scylladb.com>
Message-Id: <1471442960-110914-1-git-send-email-yoav@scylladb.com>
The WorkingDirectory directive does not support environment variables on
systemd version that is shipped with Ubuntu 16.04. Fortunately, not
setting WorkingDirectory implicitly sets it to user home directory,
which is the same thing (i.e. /var/lib/scylla).
Fixes#1319
Signed-of-by: Benoit Canet <benoit@scylladb.com>
Message-Id: <1470053876-1019-1-git-send-email-benoit@scylladb.com>
When the housekeeping configuration name was changed from conf to cfg it
was no longer included as part of the conf rpm.
This change adds a macro that determines of if the file should be
included or not and use that marco to conditionally add the
configuration file to the rpm.
Signed-off-by: Amnon Heiman <amnon@scylladb.com>
Message-Id: <1471169042-19099-1-git-send-email-amnon@scylladb.com>
Files with a conf extension are run by the scylla_prepare on the AMI.
The scylla-housekeeping configuration file is not a bash script and
should not be run.
This patch changes its extension to cfg which is more python like.
Signed-off-by: Amnon Heiman <amnon@scylladb.com>
Message-Id: <1470896759-22651-2-git-send-email-amnon@scylladb.com>
The dist flag mark the debian package as distributed package.
As such the housekeeping configuration file will be included in the
package and will not need to be created by the scylla_setup.
Signed-off-by: Amnon Heiman <amnon@scylladb.com>
Message-Id: <1470907208-502-2-git-send-email-amnon@scylladb.com>
