Following a number of similar code cleanup PR, this one aims to be the last one, definitely dropping flat from all reader and related names.
Similarly, v2 is also dropped from reader names, although it still persists in mutation_fragment_v2, mutation_v2 and related names. This won't change in the foreseeable future, as we don't have plans to drop mutation (the v1 variant).
The changes in this PR are entirely mechanical, mostly just search-and-replace.
Code cleanup, no backport required.
Closesscylladb/scylladb#24087
* github.com:scylladb/scylladb:
test/boost/mutation_reader_another_test: drop v2 from reader and related names
test/boost/mutation_reader: s/puppet_reader_v2/puppet_reader/
test/boost/sstable_datafile_test: s/sstable_reader_v2/sstable_mutation_reader/
test/boost/mutation_test: s/consumer_v2/consumer/
test/lib/mutation_reader_assertions: s/flat_reader_assertions_v2/mutation_reader_assertions/
readers/mutation_readers: s/generating_reader_v2/generating_reader/
readers/mutation_readers: s/delegating_reader_v2/delegating_reader/
readers/mutation_readers: s/empty_flat_reader_v2/empty_mutation_reader/
readers/mutation_source: s/make_reader_v2/make_mutation_reader/
readers/mutation_source: s/flat_reader_v2_factory_type/mutation_reader_factory/
readers/mutation_reader: s/reader_consumer_v2/mutation_reader_consumer/
mutation/mutation_compactor: drop v2 from compactor and related names
replica/table: s/make_reader_v2/make_mutation_reader/
mutation_writer: s/bucket_writer_v2/bucket_writer/
readers/queue: drop v2 from reader and related names
readers/multishard: drop v2 from reader and related names
readers/evictable: drop v2 from reader and related names
readers/multi_range: remove flat from name
In next patches, make_sstable_compressor_factory() will have to
disappear.
In preparation for that, we switch to a seastar::thread-dependent
replacement.
Interval map is very susceptible to quadratic space behavior when
it's flooded with many entries overlapping all (or most of)
intervals, since each such entry will have presence on all
intervals it overlaps with.
A trigger we observed was memtable flush storm, which creates many
small "L0" sstables that spans roughly the entire token range.
Since we cannot rely on insertion order, solution will be about
storing sstables with such wide ranges in a vector (unleveled).
There should be no consequence for single-key reads, since upper
layer applies an additional filtering based on token of key being
queried.
And for range scans, there can be an increase in memory usage,
but not significant because the sstables span an wide range and
would have been selected in the combined reader if the range of
scan overlaps with them.
Anyway, this is a protection against storm of memtable flushes
and shouldn't be the common scenario.
It works both with tablets and vnodes, by adjusting the token
range spanned by compaction group accordingly.
Fixes#23634.
Signed-off-by: Raphael S. Carvalho <raphaelsc@scylladb.com>
Continue the effort of normalizing reader names, stripping legacy qualifying terms like "flat" and "v2".
Flat and v2 readers are the default now, we only need to add qualifying terms to readers which are different than the normal.
One such reader remains: `make_generating_reader_v1()`.
This PR contains mostly mechanical changes, done with a sed script. Commits which only contain such mechanical renames are marked as such in the commitlog.
Code cleanup, no backport needed.
Closesscylladb/scylladb#23767
* github.com:scylladb/scylladb:
readers: mv reversing_v2.hh reversing.hh
readers: mv generating_v2.hh generating.hh
tree: s/make_generating_reader_v2/make_generating_reader/
readers: mv from_mutations_v2.hh from_mutations.hh
tree: s/make_mutation_reader_from_mutations_v2/make_mutation_reader_from_mutations/s
readers: mv from_fragments_v2.hh from_fragments.hh
readers: mv forwardable_v2.hh forwardable.hh
readers: mv empty_v2.hh empty.hh
tree: s/make_empty_flat_reader_v2/make_empty_mutation_reader/
readers/empty_v2.hh: replace forward declarations with include of fwd header
readers/mutation_reader_fwd.hh: forward declare reader_permit
readers: mv delegating_v2.hh delegating.hh
readers/delegating_v2.hh: move reader definition to _impl.hh file
The db::config is top-level configuration of scylla, we generally try to
avoid using it even in scylla components: each uses its own config
initialized by the service creator out of the db::config itself. The
generic_server is not an exception, all the more so, it already has its
own config.
Signed-off-by: Pavel Emelyanov <xemul@scylladb.com>
Closesscylladb/scylladb#23705
Adds new live updatable config: uninitialized_connections_semaphore_cpu_concurrency.
It should help to reduce cpu usage by limiting cpu concurrency for new connections. As a last resort when those connections are waiting for initial processing too long (over 1m) they are shed.
New connections_shed and connections_blocked metrics are added for tracking.
Testing:
- manually via simple program creating high number of connection and constantly re-connecting
- added benchmark
Following are benchmark results:
Before:
```
> build/release/test/perf/perf_generic_server --smp=1
170101.41 tps ( 13.1 allocs/op, 0.0 logallocs/op, 7.0 tasks/op, 4695 insns/op, 3178 cycles/op, 0 errors)
[...]
throughput: mean=173850.06 standard-deviation=1844.48 median=174509.66 median-absolute-deviation=874.23 maximum=175087.49 minimum=170588.54
instructions_per_op: mean=4725.59 standard-deviation=13.35 median=4729.38 median-absolute-deviation=12.49 maximum=4738.61 minimum=4709.96
cpu_cycles_per_op: mean=3135.08 standard-deviation=32.13 median=3122.68 median-absolute-deviation=22.29 maximum=3179.38 minimum=3103.15
```
After:
```
> build/release/test/perf/perf_generic_server --smp=1
167373.19 tps ( 13.1 allocs/op, 0.0 logallocs/op, 7.0 tasks/op, 4821 insns/op, 3371 cycles/op, 0 errors)
[...]
throughput:
mean= 171199.55 standard-deviation=2484.58
median= 171667.06 median-absolute-deviation=2087.63
maximum=173689.11 minimum=167904.76
instructions_per_op:
mean= 4801.90 standard-deviation=16.54
median= 4796.78 median-absolute-deviation=9.32
maximum=4830.71 minimum=4789.81
cpu_cycles_per_op:
mean= 3245.26 standard-deviation=32.28
median= 3230.44 median-absolute-deviation=16.52
maximum=3297.39 minimum=3215.62
```
The patch adds around 67 insns/op so it's effect on performance should be negligible.
Fixes: https://github.com/scylladb/scylladb/issues/22844Closesscylladb/scylladb#22828
* github.com:scylladb/scylladb:
transport: move on_connection_close into connection destructor
test: perf: make aggregated_perf_results formatting more human readable
transport: add blocked and shed connection metrics
generic_server: throttle and shed incoming connections according to semaphore limit
generic_server: add data source and sink wrappers bookkeeping network IO
generic_server: coroutinize part of server::do_accepts
test: add benchmark for generic_server
test: perf: add option to count multiple ops per time_parallel iteration
generic_server: add semaphore for limiting new connections concurrency
generic_server: add config to the constructor
generic_server: add on_connection_ready handler
Changes in configure.py are needed becuase we don't want to embed
this benchmark in scylla binary as perf_simple_query or perf_alternator,
it doesn't directly translate to Scylla performance but we want to use
aggregated_perf_results for precise cpu measurements so we need
different dependecies.
This kind of benchmark was superseded by perf-alternator
which has more options, workflows and most importantly
measures overhead of http server layer (including json parsing).
There is no need to maintain additional code in perf-simple-query.
Closesscylladb/scylladb#23474
This series add a new config option: `tablets_mode_for_new_keyspaces` that replaces the existing
`enable_tablets` option. It can be set to the following values:
disabled: New keyspaces use vnodes by default, unless enabled by the tablets={'enabled':true} option
enabled: New keyspaces use tablets by default, unless disabled by the tablets={'disabled':true} option
enforced: New keyspaces must use tablets. Tablets cannot be disabled using the CREATE KEYSPACE option
`tablets_mode_for_new_keyspaces=disabled` or `tablets_mode_for_new_keyspaces=enabled` control whether
tablets are disabled or enabled by default for new keyspaces, respectively.
In either cases, tablets can be opted-in or out using the `tablets={'enabled':...}`
keyspace option, when the keyspace is created.
`tablets_mode_for_new_keyspaces=enforced` enables tablets by default for new keyspaces,
like `tablets_mode_for_new_keyspaces=enabled`.
However, it does not allow to opt-out when creating
new keyspaces by setting `tablets = {'enabled': false}`
Refs scylladb/scylla-enterprise#4355
* Requires backport to 2025.1
Closesscylladb/scylladb#22273
* github.com:scylladb/scylladb:
boost/tablets_test: verify failure to create keyspace with tablets and non network replication strategy
tablets: enforce tablets using tablets_mode_for_new_keyspaces=enforced config option
db/config: add tablets_mode_for_new_keyspaces option
Following the recent refactoring of removing "flat" and "v2" from reader
names, replacing all the fully qualified names with simply "mutation_reader".
Closesscylladb/scylladb#23346
The new option deprecates the existing `enable_tablets` option.
It will be extended in the next patch with a 3rd value: "enforced"
while will enable tablets by default for new keyspace but
without the posibility to opt out using the `tablets = {'enabled':
false}` keyspace schema option.
Signed-off-by: Benny Halevy <bhalevy@scylladb.com>
Rename the `--upload bool` into `--operation string` one, so that new
tests can be added in the future. Also rename run_download() to
run_contiguous_get() because this is what the internals of this method
do -- just GET contiguous ranges sequentially.
Signed-off-by: Pavel Emelyanov <xemul@scylladb.com>
`seastar::at_exit()` was marked deprecated recently. so let's use the recommended approach to perform cleanups.
---
it's a cleanup, hence no need to backport.
Closesscylladb/scylladb#23253
* github.com:scylladb/scylladb:
perf/perf_sstable: fix the indent
perf/perf_sstable: stop using at_exit()
In case invoke_on_all(tester::start) throws, the sharded<tester>
instance remains non-stopped and calltrace is reported on test stop. Not
nice, fix it so that sharded<> thing is stopped in any case.
Signed-off-by: Pavel Emelyanov <xemul@scylladb.com>
Closesscylladb/scylladb#23244
seastar::at_exit() was marked deprecated recently. so let's use
the recommended approach to perform cleanups.
Signed-off-by: Kefu Chai <kefu.chai@scylladb.com>
The test no longer worked becuase load balancer requires proper schema
in the database now. Convert to topology_builder which builds topology
in the database and create schema in the database (which needs proper
topology).
Replace boost::accumulate() calls with std::ranges facilities. This
change reduces external dependencies and modernizes the codebase.
Signed-off-by: Kefu Chai <kefu.chai@scylladb.com>
Closesscylladb/scylladb#23062
This makes decisions made by the scheduler consistent with decisions
made on table creation, with regard to tablet count.
We want to avoid over-allocation of tablets when table is created,
which would then be reduced by the scheduler's scaling logic. Not just
to avoid wasteful migrations post table creation, but to respect the
per-shard goal. To respect the per-shard goal, the algorithm will no
longer be as simple as looking at hints, and we want to share the
algorithm between the scheduler and initial tablet allocator. So
invoke the scheduler to get the tablet count when table is created.
The existing test measures latencies of object GET-s. That's nice (though incomplete), but we want to measure upload performance. Here it is.
refs: #22460Closesscylladb/scylladb#22480
* github.com:scylladb/scylladb:
test/perf/s3: Add --part-size-mb option for upload test
test/perf/s3: Add uploading test
test/perf/s3: Some renames not to be download-centric
test/perf/s3: Make object/file name configurable
test/perf/s3: Configure maximum number of sockets
test/perf/s3: Remove parallelizm
s3/client: Make http client connections limit configurable
This commit eliminates unused boost header includes from the tree.
Removing these unnecessary includes reduces dependencies on the
external Boost.Adapters library, leading to faster compile times
and a slightly cleaner codebase.
Signed-off-by: Kefu Chai <kefu.chai@scylladb.com>
Closesscylladb/scylladb#22857
Test now uses default internal part size, but for performance
comparisons its good to make it configurable.
Signed-off-by: Pavel Emelyanov <xemul@scylladb.com>
The test picks up a file and uploads it into the bucket, then prints the
time it took and uploading speed. For now it's enough, with existing S3
latencies more timing details can be obtained by turning on trace
logging on s3 logger.
Signed-off-by: Pavel Emelyanov <xemul@scylladb.com>
Now this test is all about reading objects. Rename some bits in it so
that they can be re-used by future uploading test as well.
Signed-off-by: Pavel Emelyanov <xemul@scylladb.com>
Now the download test first creates a temporary object and then reads
data from it. It's good to have an option to download pre-existing file.
This option will also be used for uploading test (next patches)
Signed-off-by: Pavel Emelyanov <xemul@scylladb.com>
Add the --sockets NR option that limits the number of sockets the
underlying http client is configured to have.
Signed-off-by: Pavel Emelyanov <xemul@scylladb.com>
The test spawns several fibers that read the same file in parallel.
There's not much point in it, just makes the code harder to maintain.
Signed-off-by: Pavel Emelyanov <xemul@scylladb.com>
This series extends the table schema with per-table tablet options.
The options are used as hints for initial tablet allocation on table creation and later for resize (split or merge) decisions,
when the table size changes.
* New feature, no backport required
Closesscylladb/scylladb#22090
* github.com:scylladb/scylladb:
tablets: resize_decision: get rid of initial_decision
tablet_allocator: consider tablet options for resize decision
tablet_allocator: load_balancer: table_size_desc: keep target_tablet_size as member
network_topology_strategy: allocate_tablets_for_new_table: consider tablet options
network_topology_strategy: calculate_initial_tablets_from_topology: precalculate shards per dc using for_each_token_owner
network_topology_strategy: calculate_initial_tablets_from_topology: set default rf to 0
cql3: data_dictionary: format keyspace_metadata: print "enabled":true when initial_tablets=0
cql3/create_keyspace_statement: add deprecation warning for initial tablets
test: cqlpy: test_tablets: add tests for per-table tablet options
schema: add per-table tablet options
feature_service: add TABLET_OPTIONS cluster schema feature
This update introduces four types of credential providers:
1. Environment variables
2. Configuration file
3. AWS STS
4. EC2 Metadata service
The first two providers should only be used for testing and local runs. **They must NEVER be used in production.**
The last two providers are intended for use on real EC2 instances:
- **AWS STS**: Preferred method for obtaining temporary credentials using IAM roles.
- **EC2 Metadata Service**: Should be used as a last resort.
Additionally, a simple credentials provider chain is created. It queries each provider sequentially until valid credentials are obtained. If all providers fail, it returns an empty result.
fixes: #21828Closesscylladb/scylladb#21830
* github.com:scylladb/scylladb:
docs: update the `object_storage.md` and `admin.rst`
aws creds: add STS and Instance Metadata service credentials providers
aws creds: add env. and file credentials providers
s3 creds: move credentials out of endpoint config
Use the keyspace initial_tablets for min_tablet_count, if the latter
isn't set, then take the maximum of the option-based tablet counts:
- min_tablet_count
- and expected_data_size_in_gb / target_tablet_size
- min_per_shard_tablet_count (via
calculate_initial_tablets_from_topology)
If none of the hints produce a positive tablet_count,
fall back to calculate_initial_tablets_from_topology * initial_scale.
Signed-off-by: Benny Halevy <bhalevy@scylladb.com>
This commit entirely removes credentials from the endpoint configuration. It also eliminates all instances of manually retrieving environment credentials. Instead, the construction of file and environment credentials has been moved to their respective providers. Additionally, a new aws_credentials_provider_chain class has been introduced to support chaining of multiple credential providers.
This commit refactors the way AWS credentials are managed in Scylla. Previously, credentials were included in the endpoint configuration. However, since credentials and endpoint configurations serve different purposes and may have different lifetimes, it’s more logical to manage them separately. Moving forward, credentials will be completely removed from the endpoint_config to ensure clear separation of concerns.
The repair_time in system.tablets will be updated when repair runs
successfully. We can now use it to update the repair time for tombstone
gc, i.e, when the system.tablets.repair_time is propagated, call
gc_state.update_repair_time() on the node that is the owner of the
tablet.
Since b3b3e880d3 ("repair: Reduce hints and batchlog flush"), the
repair time that could be used for tombstone gc might be smaller than
when the repair is started, so the actual repair time for tombstone gc
is returned by the repair rpc call from the repair master node.
Fixes#17507
New feature. No backport is needed.
Closesscylladb/scylladb#21896
* github.com:scylladb/scylladb:
repair: Stop using rpc to update repair time for repairs scheduled by scheduler
repair: Wire repair_time in system.tablets for tombstone gc
test: Disable flush_cache_time for two tablet repair tests
test: Introduce guarantee_repair_time_next_second helper
repair: Return repair time for repair_service::repair_tablet
service: Add tablet_operation.hh
Introduces a comprehensive audit system to track database operations for security
and compliance purposes. This change includes:
Core Components:
- New audit subsystem for logging database operations
- Service level integration for proper resource management
- CQL statement tracking with operation categories
- Login process integration for tenant management
Key Features:
- Configurable audit logging (syslog/table)
- Operation categorization (QUERY/DML/DDL/DCL/AUTH/ADMIN)
- Selective auditing by keyspace/table
- Password sanitization in audit logs
- Service level shares support (1-1000) for workload prioritization
- Proper lifecycle management and cleanup
I ran the dtests for audit (manually enabled) and they pass.
The in-repo tests pass.
Notably, there should be no non-whitespace changes between this and scylla-enterprise
Fixesscylladb/scylla-enterprise#4999Closesscylladb/scylladb#22147
* github.com:scylladb/scylladb:
audit: Add shares support to service level management
audit: Add service level support to CQL login process
audit: Add support to CQL statements
audit: Integrate audit subsystem into Scylla main process
audit: Add documentation for the audit subsystem
audit: Add the audit subsystem
The repair_time in system.tablets will be updated when repair runs
successfully. We can now use it to update the repair time for tombstone
gc, i.e, when the system.tablets.repair_time is propagated, call
gc_state.update_repair_time() on the node that is the owner of the
tablet.
Since b3b3e880d3 ("repair: Reduce hints and batchlog flush"), the
repair time that could be used for tombstone gc might be smaller than
when the repair is started, so the actual repair time for tombstone gc
is returned by the repair rpc call from the repair master node.
Fixes#17507
Adds core integration of the audit subsystem into Scylla's main process flow. Changes include:
- Import audit subsystem header
- Initialize audit system during server startup using configuration and token metadata
- Start audit system after API server initialization with query processor and memory manager
- Add proper shutdown sequence for audit system using RAII pattern
- Add error handling for audit system initialization failures
The audit system is now properly integrated into Scylla's lifecycle, ensuring:
- Correct initialization order relative to other subsystems
- Proper resource cleanup during shutdown
- Graceful error handling for initialization failures
