We inherited very low threshold for warning and failing multi-partition
batches, but these warnings aren't useful. The size of a batch in bytes
as no impact on node stability. In fact the warnings can cause more
problems if they flood the log.
Fix by raising the warning threshold to 128 kiB (our magic size)
and the fail threshold to 1 MiB.
Fixes#8416.
Closes#8417
- it does not support using interface names
- listen_interface is not supported
- 0.0.0.0 will work (and is reasonable) if you set broadcast_address
- empty setting is not supported
Fixes#8381.
Closes#8409
... to config descriptions
We allow setting the transitional auth as one of the options
in scylla.yaml, but don't mention it at all in the field's
description. Let's change that.
Closes#7565
The new port is configurable from scylla.yaml and defaults to 19042
(unencrypted, unless client configures encryption options and omits
`native_shard_aware_transport_port_ssl`).
Two "SUPPORTED" tags are added: "SCYLLA_SHARD_AWARE_PORT" and
"SCYLLA_SHARD_AWARE_PORT_SSL". For compatibility,
"SCYLLA_SHARDING_ALGORITHM" is still kept.
Fixes#5239
RandomPartitioner has been deprecated for 2.5 year.
Now we drop the support for it. There are two reasons for this.
First, this partitioner can lead to uneven distribution of partitions
among the nodes in the cluster which leads to hot nodes.
Second, we're planning to unify the representation of tokens and
fix it as int64_t. RandomPartitioner does not comply with this.
Signed-off-by: Piotr Jastrzebski <piotr@scylladb.com>
ByteOrderedPartitioner has been deprecated for 2.5 year.
Now we drop the support for it. There are two reasons for this.
First, this partitioner can lead to uneven distribution of partitions
among the nodes in the cluster which leads to hot nodes.
Second, we're planning to unify the representation of tokens and
fix it as int64_t. ByteOrderPartitioner does not comply with this.
Signed-off-by: Piotr Jastrzebski <piotr@scylladb.com>
OrderPreservingPartitioner seems to be long gone and not supported
so remove all the places it's still mentioned.
Signed-off-by: Piotr Jastrzebski <piotr@scylladb.com>
"
Add --experimental-features -- a vector of features to unlock. Make corresponding changes in the YAML parser.
Fixes#5338
"
* 'vecexper' of https://github.com/dekimir/scylla:
config: Add `experimental_features` option
utils: Add enum_option
Provide some explanation on prio strings + direction to gnutls manual.
Document client auth option.
Remove confusing/misleading statement on "custom options"
Message-Id: <20191210123714.12278-1-calle@scylladb.com>
When the user wants to turn on only some experimental features, they
can use this new option. The existing `experimental` option is
preserved for backwards compatibility.
Signed-off-by: Dejan Mircevski <dejan@scylladb.com>
When starting scylla daemon as non-root the initialization fails
because standard /var/lib/scylla is not accessible by regular users.
Making the default dir accessible for user is not very convenient
either, as it will cause conflicts if two or more instances of scylla
are in use.
This problem can be resolved by specifying --commitlog-directory,
--data-file-directories, etc on start, but it's too much typing. I
propose to revive Nadav's --home option that allows to move all the
directories under the same prefix in one go.
Unlike Nadav's approach the --workdir option doesn't do any tricky
manipulations with existing directories. Insead, as Pekka suggested,
the individual directories are placed under the workir if and only
if the respective option is NOT provided. Otherwise the directory
configuration is taken as is regardless of whether its absolute or
relative path.
The values substutution is done early on start. Avi suggested that
this is unsafe wrt HUP config re-read and proper paths must be
resolved on the fly, but this patch doesn't address that yet, here's
why.
First of all, the respective options are MustRestart now and the
substitution is done before HUP handler is installed.
Next, commitlog and data_file values are copied on start, so marking
the options as LiveUpdate won't make any effect.
Finally, the existing named_value::operator() returns a reference,
so returning a calculated (and thus temporary) value is not possible
(from my current understanding, correct me if I'm wrong). Thus if we
want the *_directory() to return calculated value all callers of them
must be patched to call something different (e.g. *_directory.get() ?)
which will lead to more confusion and errors.
Changes v3:
- the option is --workdir back again
- the existing *directory are only affected if unset
- default config doesn't have any of these set
- added the short -W alias
Changes v2:
- the option is --home now
- all other paths are changed to be relative
Signed-off-by: Pavel Emelyanov <xemul@scylladb.com>
Message-Id: <20191119130059.18066-1-xemul@scylladb.com>
This patch adds a warning option to the user for situations where
rows count may get bigger than initially designed. Through the
warning, users can be aware of possible data modeling problems.
The threshold is initially set to '100,000'.
Tests: unit (dev)
Message-Id: <20190528075612.GA24671@shenzou.localdomain>
Despite the name, this option also controls if a warning is issued
during memtable writes.
Warning during memtable writes is useful but the option name also
exists in cassandra, so probably the best we can do is update the
description.
Signed-off-by: Rafael Ávila de Espíndola <espindola@scylladb.com>
Message-Id: <20190125020821.72815-1-espindola@scylladb.com>
While we keep ordinary hints in a directory parallel to the data directory,
we decided to keep the materialized view hints in a subdirectory of the data
directory, named "view_pending_updates". But during boot, we expect all
subdirectories of data/ to be keyspace names, and when we notice this one,
we print a warning:
WARN: database - Skipping undefined keyspace: view_pending_updates
This spurious warning annoyed users. But moreover, we could have bigger
problems if the user actually tries to create a keyspace with that name.
So in this patch, we move the view hints to a separate top-level directory,
which defaults to /var/lib/scylla/view_hints, but as usual can be configured.
Signed-off-by: Nadav Har'El <nyh@scylladb.com>
Message-Id: <20190107142257.16342-1-nyh@scylladb.com>
Indicate the default scylla directories, rather than Cassandra's.
Provide links to Scylladocumentation where possible,
update links to Casandra documentation otherwise.
Clean up a few typos.
Signed-off-by: Benny Halevy <bhalevy@scylladb.com>
Message-Id: <20181119141912.28830-1-bhalevy@scylladb.com>
Commit d6b0c4dda4 changed the built-in default
murmur3_ignore_msb_bits to 12 (from 0) and removed the scylla.yaml default.
Removal of the scylla.yaml default was a mistake for two reasons:
- if someone downgrades a cluster, keeping scylla.yaml derived from the
master branch, they will experience resharding since the built-in default,
which has changed, will take effect. While that scenario is not supported,
it already happened and caused much consternation.
- if, in the future, we wish to change the default, we will cause resharding
again. Embedding the default in scylla.yaml allows us to change the default
for new clusters while allowing upgraded clusters to retain older values.
Therefore, this patch restores murmur3_ignore_msb_bits in scylla.yaml. Future
changes to the configuration item should change both scylla.yaml and the
built-in default.
Message-Id: <20180930090053.21136-1-avi@scylladb.com>
When murmur3_ignore_msb_bits was introduced in 1.7, we set its default zero
(to avoid resharding on upgrade) and set it to 12 in the scylla.yaml template
(to make sure we get the right value for new clusters).
Now, however, things have changed:
- clusters installed before 1.7 are a small minority
- they should have resharded long ago
- resharding is much better these days
- we have more migrations from Cassandra compared to old clusters
To allow clusters that migrated using their cassandra.yaml, and to clean up
the default scylla.yaml, make the default 12.
Users upgrading from pre-1.7 clusters will need to update their scylla.yaml,
or to reshard (which is a good idea anyway).
Fixes#3670.
Message-Id: <20180808063003.26046-1-avi@scylladb.com>
stream_throughput_outbound_megabits_per_sec is not supported and is
found in the unsupported part of scylla.yaml.
This patch removes it from the supported part of the file.
Fixes#2876
Signed-off-by: Amnon Heiman <amnon@scylladb.com>
Message-Id: <20180219111421.30687-1-amnon@scylladb.com>
- hints_directory:
- This option allows defining of the directory where hints files are going
to be stored if hinted handoff is enabled.
- hinted_handoff_enabled:
- May receive either a boolean value or a list of DCs. In the later case this
will define the DCs to which Nodes hints are going to be generated.
- max_hint_window_in_ms:
- Maximum amount of milliseconds the hints are going to be generated to the Node that is DOWN.
After this time period the hints are no longer going to be generated until the Node is seen UP.
Signed-off-by: Vlad Zolotarov <vladz@scylladb.com>
There are some users used original default cluster_name 'Test Cluster',
they will fail to start the node for cluster_name change if they use
new scylla.yaml.
'ScyllaDB Cluster' isn't more beautiful than 'Test Cluster', reset back
to original old to avoid problem for users.
Fixes#3060
Signed-off-by: Amos Kong <amos@scylladb.com>
Message-Id: <8c9dab8a64d0f4ab3a5d6910b87af696c60e5076.1513072453.git.amos@scylladb.com>
This option regulates when exactly the single-key optimization is
considered ineffective and turned off.
The threshold is the proportion of the extra data source candidates that
can be read before the optimization is considered ineffective and
disabled. The proportion is calculated as follows:
(read_data_sources - 1) / (total_data_sources - 1)
We substract 1 from the read_data_sources and total_data_sources to
effectively measure the rate of *extra* data sources we read. This
makes sure that the proportion is meaningful even if e.g. we have only
have a total of 2 data-sources and we read only 1 (best case).
Whenever this number goes above the threshold the optimization is
disabled. The threshold is number between 0 and 1, 0 forces the
optimization off and 1 forces it on. Increase the treshold to favor
throughput over latency for single-row reads, decrease the treshold to
improve latency at the expense of throughput.
If the threshold is > 0 (it's not force disabled) and the optimization
is disabled due to a read crossing the threshold, we will issue
"probing" reads (every 100th read) to determine if the optimization is
worth re-enabling. Probing reads are allowed to run through the
optimization path and if they go below the threshold the optimization is
re-enabled.
* Configuration for cluster_name is commented-out in config file.
* Default value set to empty string and if not rewritten by user then
warning is printed and value is reset to "ScyllaDB Cluster".
Fixes#2648.
Message-Id: <20170808113322.9313-1-daniel@scylladb.com>
Make the descriptions of permissions_validity_in_ms, permissions_update_interval_in_ms
and permissions_cache_max_entries more readable and more related to what they really
do.
Mention the none-zero value requirement for the permissions_update_interval_in_ms and
the permissions_cache_max_entries when the permissions cache is enabled.
Adjust the parameters description in the scylla.yaml too.
Signed-off-by: Vlad Zolotarov <vladz@scylladb.com>
Message-Id: <1499957053-31792-1-git-send-email-vladz@scylladb.com>
Mimic origin behaviour, iff TLS encryption is enabled, and
native_transport_port_ssl is set and different from
native_transport_port, start both tls- and non-tls
listeners.
Message-Id: <1496061600-24454-2-git-send-email-calle@scylladb.com>
Add batch_size_fail_threshold_in_kb to prevent huge batch from been
applied and causing troubles. Also do not warn or fail if only one
partition is affected.
Fixes: #2128
Message-Id: <20170309111247.GE8197@scylladb.com>
Set murmur3_partitioner_ignore_msb_bits to 12 (enabling the new sharding
algorithm), but do this in scylla.yaml rather than the built-in defaults.
This avoids changing the configuration for existing clusters, as their
scylla.yaml file will not be updated during the upgrade.
Message-Id: <20170214123253.3933-1-avi@scylladb.com>
Refs #1813 (fixes scylla part)
Added require_client_auth and priority_string options to
server_encryption_options/client_encryption_options an process them.
Allows TLS method/algo specification. Also enabled enforcing known cert
authentication for both node-to-node and client communication.
After recent changes to the memtable code, there is no reason for us to
uphold a maximum memtable size. Now that we only flush one memtable at a
time anyway, and also have soft limit notifications from the
region_group_reclaimer, we can just set the soft limit to the target
size and let all of that be handled by the dirty_memory_manager.
It does have the added property that we'll be flushing when we globally
reach the soft limit threshold. In conditions in which we have multiple
CF writes fighting for memory, that guarantees that we will start
flushing much earlier than the hard limit.
The threshold is set to 1/4 of dirty memory. While in theory we would
prefer the memtables to go as big as 1/2 of dirty memory, in my
experiments I have found 1/4 to be a better fit, at least for the
moment.
The reason for such behavior is that in situations where we have slow
disks, setting the soft limit to 1/2 of dirty will put us in a situation
in which we may not have finished writing down the memtable when we hit
the limit, and then throttle. When set the threshold to 1/4 of dirty, we
don't throttle at all.
This behavior could potentially be fixed by not doing the full
memtable-based throttling after we do the commitlog throttling, but that
is not something realistic for the moment.
Signed-off-by: Glauber Costa <glauber@scylladb.com>
Files with a conf extension are run by the scylla_prepare on the AMI.
The scylla-housekeeping configuration file is not a bash script and
should not be run.
This patch changes its extension to cfg which is more python like.
Signed-off-by: Amnon Heiman <amnon@scylladb.com>
Message-Id: <1470896759-22651-2-git-send-email-amnon@scylladb.com>
The housekeeping.conf is a configuration file for scylla-housekeeping.
By default it will be included in the rpm and state that the
check-version would be run.
If the file is missing, or if check-version is set to false, the check
version operation will not be performed.
Signed-off-by: Amnon Heiman <amnon@scylladb.com>
This patch adds the prometheus API it adds the proto library to the
compilation, adds an optional configuration parameter to change the
prometheus listening port and start the prometheus API in main.
To disable the prometheus API, set its listening port to 0.
Signed-off-by: Amnon Heiman <amnon@scylladb.com>
Message-Id: <1470231628-22831-2-git-send-email-amnon@scylladb.com>
