In most files it was unused. We should move these to the patch which
moved out the last interesting reader from mutation_reader.hh (and added
the corresponding new header include) but its probably not worth the
effort.
Some other files still relied on mutation_reader.hh to provide reader
concurrency semaphore and some other misc reader related definitions.
For compaction to be able to purge expired data, like tombstones, a
sstable set snapshot is set in the compaction descriptor.
That's a decision that belongs to task type. For example, all regular
compaction enable GC, whereas scrub for example doesn't for safety
reasons.
The problem is that the decision is being made by every instantiation
of compaction_descriptor in the strategies, which is both unnecessary
and also adds lots of boilerplate to the code, making it hard to
understand and work with.
As sstable set snapshot is an implementation detail, a new method
is being added to compaction_descriptor to make the intention
clearer, making the interface easier to understand.
can_purge_tombstones, used previously by rewrite task only, is being
reused for communicating GC intention into task::compact_sstables().
The boilerplate was a pain when adding a new strategy method for
the ongoing work on cleanup, described by issue #10097.
Another benefit is that we'll now only create a set snapshot when
compaction will really run. Before, it could happen that the snapshot
would be discarded if the compaction attempt had to be postponed,
which is a waste of cpu cycles.
Signed-off-by: Raphael S. Carvalho <raphaelsc@scylladb.com>
Memtables are a replica-side entity, and so are moved to the
replica module and namespace.
Memtables are also used outside the replica, in two places:
- in some virtual tables; this is also in some way inside the replica,
(virtual readers are installed at the replica level, not the
cooordinator), so I don't consider it a layering violation
- in many sstable unit tests, as a convenient way to create sstables
with known input. This is a layering violation.
We could make memtables their own module, but I think this is wrong.
Memtables are deeply tied into replica memory management, and trying
to make them a low-level primitive (at a lower level than sstables) will
be difficult. Not least because memtables use sstables. Instead, we
should have a memtable-like thing that doesn't support merging and
doesn't have all other funky memtable stuff, and instead replace
the uses of memtables in sstable tests with some kind of
make_flat_mutation_reader_from_unsorted_mutations() that does
the sorting that is the reason for the use of memtables in tests (and
live with the layering violation meanwhile).
Test: unit (dev)
Closes#10120
Instead of lengthy blurbs, switch to single-line, machine-readable
standardized (https://spdx.dev) license identifiers. The Linux kernel
switched long ago, so there is strong precedent.
Three cases are handled: AGPL-only, Apache-only, and dual licensed.
For the latter case, I chose (AGPL-3.0-or-later and Apache-2.0),
reasoning that our changes are extensive enough to apply our license.
The changes we applied mechanically with a script, except to
licenses/README.md.
Closes#9937
Move replica-oriented classes to the replica namespace. The main
classes moved are ::database, ::keyspace, and ::table, but a few
ancillary classes are also moved. There are certainly classes that
should be moved but aren't (like distributed_loader) but we have
to start somewhere.
References are adjusted treewide. In many cases, it is obvious that
a call site should not access the replica (but the data_dictionary
instead), but that is left for separate work.
scylla-gdb.py is adjusted to look for both the new and old names.
Make compaction procedure switch to table_state. Only function in
compaction.cc still directly using table is
get_fully_expired_sstables(T,...), but subsequently we'll make it
switch to table_state and then we can finally stop including database.hh
in the compaction code.
Signed-off-by: Raphael S. Carvalho <raphaelsc@scylladb.com>
there's no need for wrapping compaction_data in shared_ptr, also
let's kill unused params in create_compaction_data to simplify
its creation.
Signed-off-by: Raphael S. Carvalho <raphaelsc@scylladb.com>
So the compaction perf of different compaction strategies can be
compared. Data timestamps are diversified such that they fall into four
different bucket if TWCS is used, in order to be able to stress the
timestamp based splitting code path.
Closes#9488
compaction_info must only contain info data to be exported to the
outside world, whereas compaction_data will contain data for
controlling compaction behavior and stats which change as
compaction progresses.
This separation makes the interface clearer, also allowing for
future improvements like removing direct references to table
in compaction.
Signed-off-by: Raphael S. Carvalho <raphaelsc@scylladb.com>
Today, compaction is calling compaction manager to register / deregister
the compaction_info created by it.
This is a layer violation because manager sits one layer above
compaction, so manager should be responsible for managing compaction
info.
From now on, compaction_info will be created and managed by
compaction_manager. compaction will only have a reference to info,
which it can use to update the world about compaction progress.
This will allow compaction_manager to be simplified as info can be
coupled with its respective task, allowing duplication to be removed
and layer violation to be fixed.
Signed-off-by: Raphael S. Carvalho <raphaelsc@scylladb.com>
compaction_info must only contain info data to be exported to the
outside world, whereas compaction_data will contain data for
controlling compaction behavior and stats which change as
compaction progresses.
This separation makes the interface clearer, also allowing for
future improvements like removing direct references to table
in compaction.
Signed-off-by: Raphael S. Carvalho <raphaelsc@scylladb.com>
Today, compaction is calling compaction manager to register / deregister
the compaction_info created by it.
This is a layer violation because manager sits one layer above
compaction, so manager should be responsible for managing compaction
info.
From now on, compaction_info will be created and managed by
compaction_manager. compaction will only have a reference to info,
which it can use to update the world about compaction progress.
This will allow compaction_manager to be simplified as info can be
coupled with its respective task, allowing duplication to be removed
and layer violation to be fixed.
Signed-off-by: Raphael S. Carvalho <raphaelsc@scylladb.com>
Rename the old version to `sstables::make_reader_v1()`, to have a
nicely searcheable eradication target.
Signed-off-by: Michael Livshin <michael.livshin@scylladb.com>
Since compaction is layered on top of sstables, let's move all compaction code
into a new top-level directory.
This change will give me extra motivation to remove all layer violations, like
sstable calling compaction-specific code, and compaction entanglement with
other components like table and storage service.
Next steps:
- remove all layer violations
- move compaction code in sstables namespace into a new one for compaction.
- move compaction unit tests into its own file
Signed-off-by: Raphael S. Carvalho <raphaelsc@scylladb.com>
Message-Id: <20210707194058.87060-1-raphaelsc@scylladb.com>
When destroying an perf_sstable_test_env, an assert in sstables_manager
destructor fails, because it hasn't been closed.
Fix by removing all references to sstables from perf_sstable_test_env,
and then closing the test_env(as well as the sstables_manager)
Fixes#8736
Signed-off-by: Wojciech Mitros <wojciech.mitros@scylladb.com>
Closes#8737
`with_closeable` simplifies scoped use of
flat_mutation_reader, making sure to always close
the reader after use.
Signed-off-by: Benny Halevy <bhalevy@scylladb.com>
If possible, test the highest sstable format version,
as it's the mostly used.
If there pre-written sstables we need to load from the
test directory from an older version, either specify their
version explicitly, or use the new test_env::reusable_sst
method that looks up the latest sstable version in the
given directory and generation.
Test: unit(release)
Signed-off-by: Benny Halevy <bhalevy@scylladb.com>
Message-Id: <20201210161822.2833510-1-bhalevy@scylladb.com>
This replaces a lot of make_lw_shared(schema(...)) with
make_shared_schema(...).
This makes it easier to drop a dependency on the differences between
seastar::make_shared and std::make_shared.
Signed-off-by: Rafael Ávila de Espíndola <espindola@scylladb.com>
For tombstone expiration to proceed correctly without the risk of resurrecting
data, the sstable set must be present.
Regular compaction and derivatives provide the sstable set, so they're able
to expire tombstones with no resurrection risk.
Resharding, on the other hand, can run on any shard, not necessarily on the
same shard that one of the input sstables belongs to, so it currently cannot
provide a sstable set for tombstone expiration to proceed safely.
That being said, let's only do expiration based on the presence of the set.
This makes room for the sstable set to be feeded to compaction via descriptor,
allowing even resharding to do expiration. Currently, compaction thinks that
sstable set can only come from the table, and that also needs to be changed
for further flexibility.
It's theoretically possible that a given resharding job will resurrect data if
a fully expired SSTable is resharded at a shard which it doesn't belong to.
Resharding will have no way to tell that expiring all that data will lead to
resurrection because the relevant SSTables are at different shards.
This is fixed by checking for fully expired sstables only on presence of
the sstable set.
Fixes#6600.
Signed-off-by: Raphael S. Carvalho <raphaelsc@scylladb.com>
Message-Id: <20200605200954.24696-1-raphaelsc@scylladb.com>
We shouldn't assume the I/O priority class for compactions. For
instance, if we are dealing with offstrategy compactions we may want to
use the maintenance group priority for them.
For now, all compactions are put in the compaction class. rewrite
compactions (scrub, cleanup) could be maintenance, but we don't have
clear access to the database object at this time to derive the
equivalent CPU priority. This is planned to be changed in the future,
and when we do change it, we'll adjust.
Same goes for resharding: while we could at this point change it we'd
risking memory pressure since resharding is run online and sstables are
shared until resharding is done. When we move it to offline execution
we'll do it with maintenance priority.
Signed-off-by: Glauber Costa <glauber@scylladb.com>
Message-Id: <20200512002233.306538-3-glauber@scylladb.com>
There are many differences between resharding and compaction that are
artificial, arising more from the way we ended up implementing it than
necessity. This patch attempts to pass the creator and replacer functions
through the compaction_descriptor.
There is a difference between the creator function for resharding and
regular compaction: resharding has to pass the shard number on behalf
of which the SSTable is created. However regular compactions can just
ignore this. No need to have a special path just for this.
After this is done, the constructor for the compaction object can be
greatly simplified. In further patches I intend to simplify it a bit
further, but some more cleanup has to happen first.
To make that happen we have to construct a compaction_descriptor object
inside the resharding function. This is temporary: resharding currently
works with a descriptor, but at some point that descriptor is lost and
broken into pieces to be passed to this function. The overarching goal
of this work is exactly to be able to keep that descriptor for as long
as possible, which should simplify things a lot.
Callers are patched, but there are plenty for sstable_datafile_test.cc.
For their benefit, a helper function is provided to keep the previous
signature (test only).
Signed-off-by: Glauber Costa <glauber@scylladb.com>
sstable_test.hh started as collection of utilities shared between the
various `_sstable_test.cc` files. Predictably other tests started using
it as well, among them some that are non boost unit tests. This poses a
problem as if we add the missing boost/test/unit_test.hpp include to
sstable_test.hh these tests will suddenly have missing symbols from
boost::test. To avoid linking boost::test into all these users, extract
utilities more widely used into sstable_utils.hh
This is just a trivial wrapper over initialized_later when using
sstring, but also works when std::string is used.
Signed-off-by: Rafael Ávila de Espíndola <espindola@scylladb.com>
The former was never really more than a reader_permit with one
additional method. Currently using it doesn't even save one from any
includes. Now that readers will be using reader_permit we would have to
pass down both to mutation_source. Instead get rid of
reader_resource_tracker and just use reader_permit. Instead of making it
a last and optional parameter that is easy to ignore, make it a
first class parameter, right after schema, to signify that permits are
now a prominent part of the reader API.
This -- mostly mechanical -- patch essentially refactors mutation_source
to ask for the reader_permit instead of reader_resource_tracking and
updates all usage sites.
Move sstable_test.hh, test_table.hh and cql_assertions.hh from tests/ to
test/lib or test/boost and update dependent .cc files.
Move tests/perf_sstable.hh to test/perf/perf_sstable.hh
