Before work on tablets was completed, it was noticed that — due to some missing pieces of implementation — Scylla doesn't properly close sstables for migrated-away tablets. Because of this, disk space wasn't being reclaimed properly.
Since the missing pieces of implementation were added, the problem should be gone now. This patch adds a test which was used to reproduce the problem earlier. It's expected to pass now, validating that the issue was fixed.
Should be backported to branch-6.0, because the tested problem was also affecting that branch.
Fixes#16946Closesscylladb/scylladb#18906
* github.com:scylladb/scylladb:
test_tablets: add test_tablet_storage_freeing
test: pylib: add get_sstables_disk_usage()
As it turns out, each sstable carries its own schema in its serialization header (Statistics component). This schema is incomplete -- the names of the key columns are not stored, just their type. Static and regular columns do have names and types stored however. This bare-bones schema is enough to parse and display the content of the sstable. Another thing missing is schema options (the stuff after the `WITH` keyword, except the clustering order). The only options stored are the compression options (in the CompressionInfo component), this is actually needed to read the Data component.
This series adds a new method to `tools/schema_loader.cc` to extract the schema stored in the sstable itself. This new schema load method is used as the last fall-back for obtaining the schema, in case scylla-sstable is trying to autodetect the schema of the sstable. Although, right now this bare-bones schema is enough for everything scylla-sstable does, it is more future proof to stick to the "full" schema if possible, so this new method is the last resort for now.
Fixes: https://github.com/scylladb/scylladb/issues/17869
Fixes: https://github.com/scylladb/scylladb/issues/18809
New functionality, no backport needed.
Closesscylladb/scylladb#19169
* github.com:scylladb/scylladb:
tools/scylla-sstable: log loaded schema with trace level
tools/scylla-sstable: load schema from the sstable as fallback
tools/schema_loader: introduce load_schema_from_sstable()
test/lib/random_schema: remove assert on min number of regular columns
sstables: introduce load_metadata()
This patch includes extensive testing for what happens to an ongoing
paged query when a secondary index is suddenly added or dropped.
Issue #18992 was opened suggesting that this would be broken, and indeed
the tests included here show that it is indeed broken.
The four tests included in this patch are heavily commented to explain
what they are testing and why, but here is a short summary of what is
being tested by each of them:
1. A paged query filtering on v=17 continues correctly even if an
index is created on v.
2. A paged query filtering on v1 and v2 where v2 is indexed,
continues correctly even if an index is created on v1 (remember
that Scylla prefers to use the first index mentioned in the query).
3. A paged query using an index on v continues correctly even if that
index is deleted.
4. However, if the query doesn't say "ALLOW FILTERING", it cannot
be continued after the index is deleted.
All these tests pass on Cassandra, but all of them except the fourth
fail on Scylla, reproducing issue #18992. Somewhat to my suprise, the
failure of the query in all the failed tests is silent (i.e., trying to
fetch the next page just fetches nothing and says the iteration is done).
I was expecting more dramatic failures ("marshaling error" messages,
crashes, etc.) but didn't get them.
Refs #18992
Signed-off-by: Nadav Har'El <nyh@scylladb.com>
Closesscylladb/scylladb#19000
When auto-detecting the schema of the sstable, if all other methods
failed, load the schema from the sstable's serialization header. This
schema is incomplete. It is just enough to parse and display the content
of the sstable. Although parsing and displaying the content of the
sstable is all scylla-sstable does, it is more future-compatible to us
the full schema when possible. So the always-available but minimal
schema that each sstable has on itself, is used just as a fallback.
The test which tested the case when all schema load attempts fail,
doesn't work now, because loading the serialization header always
succeeds. So convert this test into two positive tests, testing the
serialization header schema fallback instead.
Allows loading the schema from an sstable's serialization header. This
schema is incomplete, but it is enough to parse and display the content
of the sstable.
Change the format of sync points to use host ID instead of IPs, to be consistent with the use of host IDs in hinted handoff module.
Introduce sync point v3 format which is the same as v2 except it stores host IDs instead of IPs.
The decoding supports both formats with host IDs and IPs, so a sync point contains now a variant of either types, and in the case of new type the translation is avoided.
Fixes#18653Closesscylladb/scylladb#19134
* github.com:scylladb/scylladb:
db/hints: migrate sync point to host ID
db/hints: rename sync point structures with _v1 suffix to _v1_v2
before this change, when performing memtable_test, we expect that
the memtables of ks.cf is the only memtables being flushed. and
we inject 4 failures in the code path of flush, and wait until 4
of them are triggered. but in the background, `dirty_memory_manager`
performs flush on all tables when necessary. so, the total number of
failures is not necessary the total number of failures triggered
when flushing ks.cf, some of them could be triggered when flushing
system tables. that's why we have sporadict test failures from
this test. as we might check `t.min_memtable_timestamp()` too soon.
after this change, we increase `unspooled_dirty_soft_limit` setting,
in order to disable `dirty_memory_manager`, so that the only flush
is performed by the test.
Fixes#19034
Signed-off-by: Kefu Chai <kefu.chai@scylladb.com>
before this change, we verify the behavior of design under test using
`BOOST_ASSERT()`, which is a wrapper around `assert()`, so if a test
fails, the test just aborts. this is not very helpful for postmortem
debugging.
after this change, we use `BOOST_REQUIRE` macro for verifying the
behavior, so that Boost.Test prints out the condition if it does not
hold when we test it.
Refs #19034
Signed-off-by: Kefu Chai <kefu.chai@scylladb.com>
This config item is propagated to the table object via table::config. Although the field in `table::config`, used to propagate the value, was `utils::updateable_value<T>`, it was assigned a constant and so the live-update chain was broken.
This series fixes this and adds a test which fails before the patch and passes after. The test needed new test infrastructure, around the failure injection api, namely the ability to exfiltrate the value of internal variable. This infrastructure is also added in this series.
Fixes: https://github.com/scylladb/scylladb/issues/18674
- [x] This patch has to be backported because it fixes broken functionality
Closesscylladb/scylladb#18705
* github.com:scylladb/scylladb:
test/topology_custom: add test for enable_compacting_data_for_streaming_and_repair live-update
test/pylib: rest_client: add get_injection()
api/error_injection: add getter for error_injection
utils/error_injection: add set_parameter()
replica/database: fix live-update enable_compacting_data_for_streaming_and_repair
Change the format of sync points to use host ID instead of IPs, to be
consistent with the use of host IDs in hinted handoff module.
Introduce sync point v3 format which is the same as v2 except it stores
host IDs instead of IPs.
The encoding of sync points now always uses the new v3 format with host
IDs.
The decoding supports both formats with host IDs and IPs, so a sync point
contains now a variant of either types, and in the case of the new
format the translation from IP to host ID is avoided.
Most of the time this test spends waiting for a node to die. Helps 3x times
Was
real 9m21,950s
user 1m11,439s
sys 1m26,022s
Now
real 3m37,780s
user 0m58,439s
sys 1m13,698s
refs: #17764
Signed-off-by: Pavel Emelyanov <xemul@scylladb.com>
Closesscylladb/scylladb#19222
Consider the following:
1) table A has N tablets and views
2) migration starts for a tablet of A from node 1 to 2.
3) migration is at write_both_read_old stage
4) coordinator will push writes to both nodes (pending and leaving)
5) A has view, so writes to it will also result in reads (table::push_view_replica_updates())
6) tablet's update_effective_replication_map() is not refreshing tablet sstable set (for new tablet migrating in)
7) so read on step 5 is not being able to find sstable set for tablet migrating in
Causes the following error:
"tablets - SSTable set wasn't found for tablet 21 of table mview.users"
which means loss of write on pending replica.
The fix will refresh the table's sstable set (tablet_sstable_set) and cache's snapshot.
It's not a problem to refresh the cache snapshot as long as the logical
state of the data hasn't changed, which is true when allocating new
tablet replicas. That's also done in the context of compactions for example.
Fixes#19052.
Fixes#19033.
Signed-off-by: Raphael S. Carvalho <raphaelsc@scylladb.com>
Closesscylladb/scylladb#19099
Fixesscylladb/scylla-pkg#3845
Don't overwrite (or rather change) AWS credentials variables if already set in
enclosing environment. Ensures EAR tests for AWS KMS can run properly in CI.
v2:
* Allow environment variables in reading obj storage config - allows CI to
use real credentials in env without risking putting them info less seure
files
* Don't write credentials info from miniserver into config, instead use said
environment vars to propagate creds.
v3:
* Fix python launch scripts to not clear environment, thus retaining above aws envs.
Closesscylladb/scylladb#19086
This is a translation of Cassandra's CQL unit test source file
DistinctQueryPagingTest.java into our cql-pytest framework.
The 5 tests did not reproduce any previously-unknown bug, but did provide
additional reproducers for one already-known issue:
Refs #10354: SELECT DISTINCT should allow filter on static columns,
not just partition keys
Signed-off-by: Nadav Har'El <nyh@scylladb.com>
Closesscylladb/scylladb#18971
Adds an util for measuring the disk usage of the given table on the given
node.
Will be used in a follow-up patch for testing that sstables are freed
properly.
The check query may be executed on a node which doesn't yet see that
the downed server is down, as it is not shut down gracefully. The
query coordinator can choose the down node as a CL=1 replica for read
and time out.
To fix, wait for all nodes to notice the node is down before executing
the checking query.
Fixes#17938Closesscylladb/scylladb#19137
After wasm udf appeared, code in main, create_function_statement and schema_tables got some involvements into details of wasm engine management. Also, even prior to this, there was duplication in how function context is created by statement code and schema_tables code.
This PR generalizes function context creation and encapsulates the management in sharded<lang::manager> service. Also it removes the wasm::startup_context thing and makes wasm start/stop be "classical" (see #2737)
Closesscylladb/scylladb#19166
* github.com:scylladb/scylladb:
code: Enlighten wasm headers usage
lang: Unfriend wasm context from manager
lang, cql3, schema_tables: Don't mess with db::config
lang: Don't use db::config to create lua context
lang: Don't use db::config to create wasm context
lang: Drop manager::precompile() method
cql3, schema_tables: Generalize function creation
wasm: Replace startup_context with wasm_config
lang: Add manager::start() method
lang: Move manager to lang namespace
lang: Move wasm::manager to its .cc/.hh files
Alternator has a custom TTL implementation. This is based on a loop, which scans existing rows in the table, then decides whether each row have reached its end-of-life and deletes it if it did. This work is done in the background, and therefore it uses the maintenance (streaming) scheduling group. However, it was observed that part of this work leaks into the statement scheduling group, competing with user workloads, negatively affecting its latencies. This was found to be causes by the reads and writes done on behalf of the alternator TTL, which looses its maintenance scheduling group when these have to go to a remote node. This is because the messaging service was not configured to recognize the streaming scheduling group, when statement verbs like read or writes are invoked. The messaging service currently recognizes two statement "tenants": the user tenant (statement scheduling group) and system (default scheduling group), as we used to have only user-initiated operations and sytsem (internal) ones. With alternator TTL, there is now a need to distinguish between two kinds of system operation: foreground and background ones. The former should use the system tenant while the latter will use the new maintenance tenant (streaming scheduling group).
This series adds a streaming tenant to the messaging service configuration and it adds a test which confirms that with this change, alternator TTL is entirely contained in the maintenance scheduling group.
Fixes: #18719
- [x] Scans executed on behalf of alternator TTL are running in the statement group, disturbing user-workloads, this PR has to be backported to fix this.
Closesscylladb/scylladb#18729
* github.com:scylladb/scylladb:
alternator, scheduler: test reproducing RPC scheduling group bug
main: add maintenance tenant to messaging_service's scheduling config
The Alternator test test_metrics.py::test_item_latency confirms that
for several operation types (PutItem, GetItem, DeleteItem, UpdateItem)
we did not forget to measure their latencies.
The test checked that a latency was updated by checking that two metrics
increases:
scylla_alternator_op_latency_count
scylla_alternator_op_latency_sum
However, it turns out that the "sum" is only an approximate sum of all
latencies, and when the total sum grows large it sometimes does *not*
increase when a short latency is added to the statistics. When this
happens, this test fails on the assertion that the "sum" increases after
an operation. We saw this happening sometimes in CI runs.
The simple fix is to stop checking _sum at all, and only verify that
the _count increases - this is really an integer counter that
unconditionally increases when a latency is added to the histogram.
Don't worry that the strength of this test is reduced - this test was
never meant to check the accuracy or correctness of the histograms -
we should have different (and better) tests for that, unrelated to
Alternator. The purpose of *this* test is only to verify that for some
specific operation like PutItem, Alternator didn't forget to measure its
latency and update the histogram. We want to avoid a bug like we had
in counters in the past (#9406).
Fixes#18847.
Signed-off-by: Nadav Har'El <nyh@scylladb.com>
Closesscylladb/scylladb#19080
in e7d4e080, we reenabled the background writes in this test, but
when running with tablets enabled, background writes are still
disabled because of #17025, which was fixed last week. so we can
enable background writes with tablets.
in this change,
* background writes are enabled with tablets.
* increase the number of nodes by 1 so that we have enough nodes
to fulfill the needs of tablets, which enforces that the number
of replicas should always satisfy RF.
* pass rf to `start_writes()` explicitly, so we have less
magic numbers in the test, and make the data dependencies
more obvious.
Fixes#17589
Signed-off-by: Kefu Chai <kefu.chai@scylladb.com>
Closesscylladb/scylladb#18707
Currently they both run in streaming group and it may become busy during
repair/mv building and affect group0 functionality. Move it to the
gossiper group where it should have more time to run.
Fixesscylladb/scylladb#18863Closesscylladb/scylladb#19138
Similarly to previous patch, lua context needs db::config for creation.
It's better to get the configurables via lang::manager::config.
One thing to note -- lua config carries updateable_values on board, but
respective db::config options and _not_ LiveUpdate-able, so the lua
config could just use simple data types. This patch keeps updateable
values intact for brevity.
Signed-off-by: Pavel Emelyanov <xemul@scylladb.com>
The managerr needs to get two "fuel" configurables from db::config in
order to create context. Instead of carrying db config from callers,
keep the options on existing lang::manager::config and use them.
Signed-off-by: Pavel Emelyanov <xemul@scylladb.com>
The lang::manager starts with the help of a context because it needs to
have std::shared_ptr<> pointg to cross-shard shared wasm engine and
runner thread. For that a context is created in advance, that then helps
sharing the engine and runner across manager instances.
This patch removes the "context" and replaces it with classical
manager::config. With it, it's lang::manager who's now responsible for
initializing itself.
In order to have cross-shard engine and thread pointers, the start()
method uses invoke_on_others() facility to share the pointer.
Signed-off-by: Pavel Emelyanov <xemul@scylladb.com>
Just like any other sharded<> service, the lang::manager now starts and
stops in a classical sequence of
await sharded<manager>::start()
defer([] { await sharded<manager>::stop() })
await sharded<manager>::invoke_on_all(&manager::start)
For now the method is no-op, next patches will start using it.
Signed-off-by: Pavel Emelyanov <xemul@scylladb.com>
And, while at it, rename local variable to refer to it to as "manager"
not "wasm". Query processor and database also have getters named
"wasm()", these are not renamed yet to keep patch smaller (and those
getters are going to be reworked further anyway).
Signed-off-by: Pavel Emelyanov <xemul@scylladb.com>
It's going to become a facade in front of both -- wasm and lua, so keep
it in files with language independent names.
Signed-off-by: Pavel Emelyanov <xemul@scylladb.com>
Currently, there are 2 ways of sharing a backlog with other nodes: through
a gossip mechanism, and with responses to replica writes. In gossip, we
check each second if the backlog changed, and if it did we update other
nodes with it. However if the backlog for this node changed on another
node with a write response, the gossiped backlog is currently not updated,
so if after the response the backlog goes back to the value from the previous
gossip round, it will not get sent and the other node will stay with an
outdated backlog - this can be observed in the following scenario:
1. Cluster starts, all nodes gossip their empty view update backlog to one another
2. On node N, `view_update_backlog_broker` (the backlog gossiper) performs an iteration of its backlog update loop, sees no change (backlog has been empty since the start), schedules the next iteration after 1s
3. Within the next 1s, coordinator (different than N) sends a write to N causing a remote view update (which we do not wait for). As a result, node N replies immediately with an increased view update backlog, which is then noted by the coordinator.
4. Still within the 1s, node N finishes the view update in the background, dropping its view update backlog to 0.
5. In the next and following iterations of `view_update_backlog_broker` on N, backlog is empty, as it was in step 2, so no change is seen and no update is sent due to the check
```
auto backlog = _sp.local().get_view_update_backlog();
if (backlog_published && *backlog_published == backlog) {
sleep_abortable(gms::gossiper::INTERVAL, _as).get();
continue;
}
```
After this scenario happens, the coordinator keeps an information about an increased view update backlog on N even though it's actually already empty
This patch fixes the issue this by notifying the gossip that a different backlog
was sent in a response, causing it to send an unchanged backlog to other
nodes in the following gossip round.
Fixes: https://github.com/scylladb/scylladb/issues/18461
Similarly to https://github.com/scylladb/scylladb/pull/18646, without admission control (https://github.com/scylladb/scylladb/pull/18334), this patch doesn't affect much, so I'm marking it as backport/none
Tests: manual. Currently this patch only affects the length of MV flow control delay, which is not reliable to base a test on. A proper test will be added when MV admission control is added, so we'll be able to base the test on rejected requests
Closesscylladb/scylladb#18663
* github.com:scylladb/scylladb:
mv: gossip the same backlog if a different backlog was sent in a response
node_update_backlog: divide adding and fetching backlogs
Due to gradual raft introduction into statements code in cases when single statement modified more than one table or mutation producing function was composed out of simpler ones we violated transactional logic and statement execution was not atomic as whole.
This patch changes that, so now either all changes resulting from statement execution are applied or none. Affected statements types are:
- schema modification
- auth modifications
- service levels modifications
Fixes https://github.com/scylladb/scylladb/issues/17738Closesscylladb/scylladb#17910
* github.com:scylladb/scylladb:
raft: rename mutations_collector to group0_batch
raft: rename announce to commit
cql3: raft: attach description to each mutations collector group
auth: unify mutations_generator type
auth: drop redundant 'this' keyword
auth: remove no longer used code from standard_role_manager::legacy_modify_membership
cql3: auth: use mutation collector for service levels statements
cql3: auth: use mutation collector for alter role
cql3: auth: use mutation collector for grant role and revoke role
cql3: auth: use mutation collector for drop role and auto-revoke
auth: add refactored modify_membership func in standard_role_manager
auth: implement empty revoke_all in allow_all_authorizer
auth: drop request_execution_exception handling from default_authorizer::revoke_all
Revert "Introduce TABLET_KEYSPACE event to differentiate processing path of a vnode vs tablets ks"
cql3: auth: use mutation collector for grant and revoke permissions
cql3: extract changes_tablets function in alter_keyspace_statement
cql3: auth: use mutation collector for create role statement
auth: move create_role code into service
auth: add a way to announce mutations having only client_state ref
auth: add collect_mutations common helper
auth: remove unused header in common.hh
auth: add class for gathering mutations without immediate announce
auth: cql3: use auth facade functions consistently on write path
auth: remove unused is_enforcing function
We want to exclude repair with tablet migrations to avoid races
between repair reads and writes with replica movement. Repair is not
prepared to handle topology transitions in the middle.
One reason why it's not safe is that repair may successfully write to
a leaving replica post streaming phase and consider all replicas to be
repaired, but in fact they are not, the new replica would not be
repaired.
Other kinds of races could result in repair failures. If repair writes
to a leaving replica which was already cleaned up, such writes will
fail, causing repair to fail.
Excluding works by keeping effective_replication_map_ptr in a version
which doesn't have table's tablets in transitions. That prevents later
transitions from starting because topology coordinator's barrier will
wait for that erm before moving to a stage later than
allow_write_both_read_old, so before any requests start using the new
topology. Also, if transitions are already running, repair waits for
them to finish.
A blocked tablet migration (e.g. due to down node) will block repair,
whereas before it would fail. Once admin resolves the cause of blocked migration,
repair will continue.
Fixes#17658.
Fixes#18561.
Closesscylladb/scylladb#18641
* github.com:scylladb/scylladb:
test: pylib: Do not block async reactor while removing directories
repair: Exclude tablet migrations with tablet repair
repair_service: Propagate topology_state_machine to repair_service
main, storage_service: Move topology_state_machine outside storage_service
storage_srvice, toplogy: Extract topology_state_machine::await_quiesced()
tablet_scheduler: Make disabling of balancing interrupt shuffle mode
tablet_scheduler: Log whether balancing is considered as enabled
The API already promises this, the comment on effective_replication_map says:
"Excludes replicas which are in the left state".
Tablet replicas on the replaced node are rebuilt after the node
already left. We may no longer have the IP mapping for the left node
so we should not include that node in the replica set. Otherwise,
storage_proxy may try to use the empty IP and fail:
storage_proxy - No mapping for :: in the passed effective replication map
It's fine to not include it, because storage proxy uses keyspace RF
and not replica list size to determine quorum. The node is not coming
up, so noone should need to contact it.
Users which need replica list stability should use the host_id-based API.
Fixes#18843Closesscylladb/scylladb#18955
* github.com:scylladb/scylladb:
tablets: Filter-out left nodes in get_natural_endpoints()
test: pylib: Extract start_writes() load generator utility
Currently, we only update the backlogs in node_update_backlog at the
same time when we're fetching them. This is done using storage_proxy's
method get_view_update_backlog, which is confusing because it's a getter
with side-effects. Additionally, we don't always want to update the
backlog when we're reading it (as in gossip which is only on shard 0)
and we don't always want to read it when we're updating it (when we're
not handling any writes but the backlog drops due to background work
finish).
This patch divides the node_view_backlog::add_fetch as well the
storage_proxy::get_view_update_backlog both into two methods; one
for updating and one for reading the backlog. This patch only replaces
the places where we're currently using the view backlog getter, more
situations where we should get/update the backlog should be considered
in a following patch.
All sharded<service>'s a supposed to have their own config and not use global db::config one. The service config, in turn, is to be created by main/cql_test_env/whatever out of db::config and, maybe, other data. Gossiper is almost there, but it still uses db::config in few places.
Closesscylladb/scylladb#19051
* github.com:scylladb/scylladb:
gossiper: Stop using db::config
gossiper: Move force_gossip_generation on gossip_config
gossiper: Move failure_detector_timeout_ms on gossip_config
main: Fix indentation after previous patch
main: Make gossiper config a sharded parameter
main: Add local variable for set of seeds
main: Add local variable for group0 id
main: Add local variable for cluster_name
We recently added to cql-pytest tests the ability to check if tablets
are enabled or not (for some tablet-specific tests). When running
tests against Cassandra or old pre-tablet versions of Scylla, this
fact is detected and "False" is returned immediately. However, we
still look at a system table which didn't exist on really ancient
versions of Scylla, and tests couldn't run against such versions.
The fix is trivial: if that system table is missing, just ignore the
error and return False (i.e., no tablets). There were no tablets on
such ancient versions of Scylla.
Signed-off-by: Nadav Har'El <nyh@scylladb.com>
Closesscylladb/scylladb#19098
Fetching only the first page is not the intuitive behavior expected by users.
This causes flakiness in some tests which generate variable amount of
keys depending on execution speed and verify later that all keys were
written using a single SELECT statement. When the amount of keys
becomes larger than page size, the test fails.
Fixes#18774Closesscylladb/scylladb#19004
This fixes a problem where suite cleanup schedules lots of uninstall()
tasks for servers started in the suite, which schedules lots of tasks,
which synchronously call rmtree(). These take over a minute to finish,
which blocks other tasks for tests which are still executing.
In particular, this was observed to case
ManagerClient.server_stop_gracefully() to time-out. It has a timeout
of 60 seconds. The server was stopped quickly, but the RESTful API
response was not processed in time and the call timed out when it got
the async reactor.
We want to exclude repair with tablet migrations to avoid races
between repair reads and writes with replica movement. Repair is not
prepared to handle topology transitions in the middle.
One reason why it's not safe is that repair may successfully write to
a leaving replica post streaming phase and consider all replicas to be
repaired, but in fact they are not, the new replica would not be
repaired.
Other kinds of races could result in repair failures. If repair writes
to a leaving replica which was already cleaned up, such writes will
fail, causing repair to fail.
Excluding works by keeping effective_replication_map_ptr in a version
which doesn't have table's tablets in transitions. That prevents later
transitions from starting because topology coordinator's barrier will
wait for that erm before moving to a stage later than
allow_write_both_read_old, so before any requets start using the new
topology. Also, if transitions are already running, repair waits for
them to finish.
Fixes#17658.
Fixes#18561.
If a node restart just before it stores bootstrapping node's IP it will
not have ID to IP mapping for bootstrapping node which may cause failure
on a write path. Detect this and fail bootstrapping if it happens.
Closesscylladb/scylladb#18927
* github.com:scylladb/scylladb:
raft topology: fix indentation after previous commit
raft topology: do not add bootstrapping node without IP as pending
test: add test of bootstrap where the coordinator crashes just before storing IP mapping
schema_tables: remove unused code
