In commit c63e88d556, support was added for
fast_forward_to() in data_consume_rows(). Because an input stream's end
cannot be changed after creation, that patch ignores the specified end
byte, and uses the end of file as the end position of the stream.
As result of this, even when we want to read a specific byte range (e.g.,
in the repair code to checksum the partitions in a given range), the code
reads an entire 128K buffer around the end byte, or significantly more, with
read-ahead enabled. This causes repair to do more than 10 times the amount
of I/O it really has to do in the checksumming phase (which in the current
implementation, reads small ranges of partitions at a time).
This patch has two levels:
1. In the lower level, sstable::data_consume_rows(), which reads all
partitions in a given disk byte range, now gets another byte position,
"last_end". That can be the range's end, the end of the file, or anything
in between the two. It opens the disk stream until last_end, which means
1. we will never read-ahead beyond last_end, and 2. fast_fordward_to() is
not allowed beyond last_end.
2. In the upper level, we add to the various layers of sstable readers,
mutation readers, etc., a boolean flag mutation_reader::forwarding, which
says whether fast_forward_to() is allowed on the stream of mutations to
move the stream to a different partition range.
Note that this flag is separate from the existing boolean flag
streamed_mutation::fowarding - that one talks about skipping inside a
single partition, while the flag we are adding is about switching the
partition range being read. Most of the functions that previously
accepted streamed_mutation::forwarding now accept *also* the option
mutation_reader::forwarding. The exception are functions which are known
to read only a single partition, and not support fast_forward_to() a
different partition range.
We note that if mutation_reader::forwarding::no is requested, and
fast_forward_to() is forbidden, there is no point in reading anything
beyond the range's end, so data_consume_rows() is called with last_end as
the range's end. But if forwarding::yes is requested, we use the end of the
file as last_end, exactly like the code before this patch did.
Importantly, we note that the repair's partition reading code,
column_family::make_streaming_reader, uses mutation_reader::forwarding::no,
while the other existing reading code will use the default forwarding::yes.
In the future, we can further optimize the amount of bytes read from disk
by replacing forwarding::yes by an actual last partition that may ever be
read, and use its byte position as the last_end passed to data_consume_rows.
But we don't do this yet, and it's not a regression from the existing code,
which also opened the file input stream until the end of the file, and not
until the end of the range query. Moreover, such an improvement will not
improve of anything if the overall range is always very large, in which
case not over-reading at its end will not improve performance.
Signed-off-by: Nadav Har'El <nyh@scylladb.com>
Message-Id: <20170619152629.11703-1-nyh@scylladb.com>
This reverts commit 317d7fc253 (and also the
related 2c57ab84b2). It causes crashes
during range scans, reported by Gleb:
"To reproduce I run SELECT * FROM keyspace1.standard1; on typical c-s
dataset and 3 node cluster.
Backtrace:
at /home/gleb/work/seastar/seastar/core/apply.hh:36
rvalue=<unknown type in /home/gleb/work/seastar/build/release/scylla, CU 0x54cf307, DIE 0x55ebf2a>) at /home/gleb/work/seastar/seastar/core/do_with.hh:57
range=std::vector of length 6, capacity 8 = {...}) at /home/gleb/work/seastar/seastar/core/future-util.hh:142
at ./seastar/core/future.hh:890
at /home/gleb/work/seastar/seastar/core/future-util.hh:119
at /home/gleb/work/seastar/seastar/core/future-util.hh:142
In commit c63e88d556, support was added for
fast_forward_to() in data_consume_rows(). Because an input stream's end
cannot be changed after creation, that patch ignores the specified end
byte, and uses the end of file as the end position of the stream.
As result of this, even when we want to read a specific byte range (e.g.,
in the repair code to checksum the partitions in a given range), the code
reads an entire 128K buffer around the end byte, or significantly more, with
read-ahead enabled. This causes repair to do more than 10 times the amount
of I/O it really has to do in the checksumming phase (which in the current
implementation, reads small ranges of partitions at a time).
This patch has two levels:
1. In the lower level, sstable::data_consume_rows(), which reads all
partitions in a given disk byte range, now gets another byte position,
"last_end". That can be the range's end, the end of the file, or anything
in between the two. It opens the disk stream until last_end, which means
1. we will never read-ahead beyond last_end, and 2. fast_fordward_to() is
not allowed beyond last_end.
2. In the upper level, we add to the various layers of sstable readers,
mutation readers, etc., a boolean flag mutation_reader::forwarding, which
says whether fast_forward_to() is allowed on the stream of mutations to
move the stream to a different partition range.
Note that this flag is separate from the existing boolean flag
streamed_mutation::fowarding - that one talks about skipping inside a
single partition, while the flag we are adding is about switching the
partition range being read. Most of the functions that previously
accepted streamed_mutation::forwarding now accept *also* the option
mutation_reader::forwarding. The exception are functions which are known
to read only a single partition, and not support fast_forward_to() a
different partition range.
We note that if mutation_reader::forwarding::no is requested, and
fast_forward_to() is forbidden, there is no point in reading anything
beyond the range's end, so data_consume_rows() is called with last_end as
the range's end. But if forwarding::yes is requested, we use the end of the
file as last_end, exactly like the code before this patch did.
Importantly, we note that the repair's partition reading code,
column_family::make_streaming_reader, uses mutation_reader::forwarding::no,
while the other existing reading code will use the default forwarding::yes.
In the future, we can further optimize the amount of bytes read from disk
by replacing forwarding::yes by an actual last partition that may ever be
read, and use its byte position as the last_end passed to data_consume_rows.
But we don't do this yet, and it's not a regression from the existing code,
which also opened the file input stream until the end of the file, and not
until the end of the range query. Moreover, such an improvement will not
improve of anything if the overall range is always very large, in which
case not over-reading at its end will not improve performance.
Signed-off-by: Nadav Har'El <nyh@scylladb.com>
Message-Id: <20170614072122.13473-1-nyh@scylladb.com>
Remove clustering_key_filter_factory and clustering_key_filtering_context.
Use partition_slice directly with a static get_ranges method.
Signed-off-by: Piotr Jastrzebski <piotr@scylladb.com>
This patch changes the type of the mutation partition's row_tombstones
to be a range_tombstone_list, so that they are now represented as a
set of disjoint ranges. All of its usages are updated accordingly.
Fixes#1155
Signed-off-by: Duarte Nunes <duarte@scylladb.com>
Its definition as a lambda function is inconvenient, because it does not allow
us to use default values for parameters.
Signed-off-by: Glauber Costa <glauber@scylladb.com>
The intent is to make data returned by queries always conform to a
single schema version, which is requested by the client. For CQL
queries, for example, we want to use the same schema which was used to
compile the query. The other node expects to receive data conforming
to the requested schema.
Interface on shard level accepts schema_ptr, across nodes we use
table_schema_version UUID. To transfer schema_ptr across shards, we
use global_schema_ptr.
Because schema is identified with UUID across nodes, requestors must
be prepared for being queried for the definition of the schema. They
must hold a live schema_ptr around the request. This guarantees that
schema_registry will always know about the requested version. This is
not an issue because for queries the requestor needs to hold on to the
schema anyway to be able to interpret the results. But care must be
taken to always use the same schema version for making the request and
parsing the results.
Schema requesting across nodes is currently stubbed (throws runtime
exception).
Since bytes is a very generic value that is returned from many calls,
it is easy to pass it by mistake to a function expecting a data_value,
and to get a wrong result. It is impossible for the data_value constructor
to know if the argument is a genuine bytes variable, a data_value of another
type, but serialized, or some other serialized data type.
To prevent misuse, make the data_value(bytes) constructor
(and complementary data_value(optional<bytes>) explicit.
