We experienced 'Constructing RAID volume...' takes too much time on some AMIs,
this is because setup script stuck at 'yum -y install mdadm xfsprogs'.
We don't have to install these packages on AMI startup time, we should
preinstall them on AMI creating time.
Signed-off-by: Takuya ASADA <syuu@scylladb.com>
Message-Id: <1502192796-21040-1-git-send-email-syuu@scylladb.com>
We have problem to run fstrim with nomerges=2, so we need to change
the parameter to 1 during fstrim execution.
To do this, this fix changes follow things:
- revert dropping scylla_fstrim on Ubuntu 16.04/CentOS
- disable distribution provided fstrim script
- enable scylla_fstrim on all distributions
- introduce --set-nomerges on scylla-blocktune
- scylla_fstrim call scylla-blocktune by following order:
- 'scylla-blocktune --set-nomerges 1'
- 'fstrim' for each devices
- 'scylla-blocktune --set-nomerges 2'
Fixes#2649
Signed-off-by: Takuya ASADA <syuu@scylladb.com>
Message-Id: <1501531393-21109-1-git-send-email-syuu@scylladb.com>
A user reported scylla-server.service does not able to run on their cloud instance, because of hugeadm.
(hugeadm says the kernel does not support huge pages.)
We don't need it for posix mode, so move it in dpdk mode.
Signed-off-by: Takuya ASADA <syuu@scylladb.com>
Message-Id: <1500367219-8728-1-git-send-email-syuu@scylladb.com>
Configuring cpufreq service on VMs/IaaS causes an error because it doesn't supported cpufreq.
To prevent causing error, skip whole configuration when the driver not loaded.
Fixes#2051
Signed-off-by: Takuya ASADA <syuu@scylladb.com>
Message-Id: <1498809504-27029-1-git-send-email-syuu@scylladb.com>
Current script has a bug that overwrites symlink on
/etc/sysconfig/selinux by real file, the script not able to disable
SELinux because of it.
So keep symlink after modifying the file.
Fixes#2279
Signed-off-by: Takuya ASADA <syuu@scylladb.com>
Message-Id: <1493663263-10573-1-git-send-email-syuu@scylladb.com>
This is a folded version of the following rework on the node health
check script:
- Added support for non-default cql + nodetool ports
- Script will not exit if either Scylla-server / Scylla-jmx / Both
services are not up and running. It will alert the user about it and
which output cannot be collected, but continue collecting everything
else.
- Removed lshw installation and non-needed use in commands
- Script supports RHEL/CentOS/Ubuntu14/Ubuntu16/Debian (tested on all
beside Debian, should behave the same as Ubuntu14/16)
- All Indentation issues fixed -> using only tab (no spaces)
consistently.
- >> vs. > was fixed as well in the needed places.
- Changes the ${VAR_NAME} instances to $VAR_NAME, and kept the {} only
where needed.
- Check Scylla service as Vlad recommended using 'ps -C'
- Fixed the CQL not listening error message.
- Added Sanity check if script is attempted to run on non-Fedora and
non-Debian OS -> alert the user and exit.
- Removed the MANUAL CHECK LIST section (moved to Google Forms)
- Added date in head of the report.
- Removed text from Report's "PURPOSE" section, which was referring to
the "MANUAL CHECK LIST" (not needed anymore).
[ penberg: Fold into a single commit and add proper license. ]
Acked-by: Vlad Zolotarov <vladz@scylladb.com>
Message-Id: <1493900076-29170-1-git-send-email-penberg@scylladb.com>
During the changes in the way the housekeeping check for newer version
and warn about it in the installation the UUID part was removed but kept
in the sarounding if.
Signed-off-by: Amnon Heiman <amnon@scylladb.com>
Message-Id: <20170426075724.7132-1-amnon@scylladb.com>
While cpuset.conf is supposed to be set before this is used, not having
a cpuset.conf at all is a valid configuration. The current code will
raise an exception in this case, but it shouldn't.
Also, as noted by Amos, atoi() is not available as a global symbol. Most
invocations were safe, calling string.atoi(), but one of them wasn't.
This patch replaces all usages of atoi() with int(), which is more
portable anyway.
Signed-off-by: Glauber Costa <glauber@scylladb.com>
Message-Id: <20170407172937.17562-1-glauber@scylladb.com>
We have recently fixed the ami init scripts to mark i3 as a supported
instance. However, the code to detect whether or not the instance is
supported is duplicated, and called from multiple locations. That means
that when the user logs in, it will see the instance as not supported -
as the test is coming from a different source.
This patch moves it to the scylla_lib.sh utilities script, so we can
share it, and make sure it is right for all locations.
Signed-off-by: Glauber Costa <glauber@scylladb.com>
Message-Id: <20170406201137.8921-1-glauber@scylladb.com>
As we convert more stuff to python, we'll have more opportunities for
sharing code between them. We already do that for the bash scripts with
a file "scylla_lib.sh". We'll do the same for python.
Signed-off-by: Glauber Costa <glauber@scylladb.com>
We recently introduced fstrim cronjob / systemd timer unit, but some of
distributions already has their own fstrim cronjob / systemd timer unit.
So let's use them when it's posssible.
Fixes#2233
Signed-off-by: Takuya ASADA <syuu@scylladb.com>
Message-Id: <1491226727-10507-1-git-send-email-syuu@scylladb.com>
After RAID devices mounted to /var/lib/scylla, scylla-server doesn't able to
find ./conf/ directory since we haven't created symlinks on the volume.
Instead of creating symlink on scylla_raid_setup, let's specify scylla.yaml
path on program argument.
Fixes#2236
Signed-off-by: Takuya ASADA <syuu@scylladb.com>
Message-Id: <1491056110-1078-1-git-send-email-syuu@scylladb.com>
On Ubuntu 14.04, the lsblk doesn't have '-p' option, but
`scylla_setup` try to get block list by `lsblk -pnr` and
trigger error.
Current simple pattern will match all help content, it might
match wrong options.
scylla-test@amos-ubuntu-1404:~$ lsblk --help | grep -e -p
-m, --perms output info about permissions
-P, --pairs use key="value" output format
Let's use strict pattern to only match option at the head. Example:
scylla-test@amos-ubuntu-1404:~$ lsblk --help | grep -e '^\s*-D'
-D, --discard print discard capabilities
Signed-off-by: Amos Kong <amos@scylladb.com>
Message-Id: <4f0f318353a43664e27da8a66855f5831457f061.1489712867.git.amos@scylladb.com>
Discarding blocks on large RAID volume takes too much time, user may suspects
the script doesn't works correctly, so it's better to skip, do discard directly on each volume instead.
Fixes#1896
Signed-off-by: Takuya ASADA <syuu@scylladb.com>
Message-Id: <1489533460-30127-1-git-send-email-syuu@scylladb.com>
The current test for whether or not the filesystem is mounted is weak
and will fail if multiple pieces of the hierarchy are mounted.
util-linux ships with a mountpoint command that does exactly that,
so we'll use that instead.
Signed-off-by: Glauber Costa <glauber@scylladb.com>
Message-Id: <1488742801-4907-1-git-send-email-glauber@scylladb.com>
By default behavior is kept the same. There are deployments in which we
would like to mount data and commitlog to different places - as much as
we have avoided this up until this moment.
One example is EC2, where users may want to have the commitlog mounted
in the SSD drives for faster writes but keep the data in larger, less
expensive and durable EBS volumes.
Signed-off-by: Glauber Costa <glauber@scylladb.com>
Message-Id: <1488258215-2592-1-git-send-email-glauber@scylladb.com>
scylla-housekeeping requires to run 'restart mode' for check the version during
scylla-server restart, which wasn't called on systemd timer so added it.
Existing scylla-housekeeping.timer renamed to scylla-housekeeping-daily.timer,
since it is running 'daily mode'.
Fixes#1953
Signed-off-by: Takuya ASADA <syuu@scylladb.com>
Message-Id: <1486180031-18093-1-git-send-email-syuu@scylladb.com>
