Currently, if a keyspace has an aggregate and the keyspace
is dropped, the keyspace becomes corrupted and another keyspace
with the same name cannot be created again
This is caused by the fact that when removing an aggregate, we
call create_aggregate() to get values for its name and signature.
In the create_aggregate(), we check whether the row and final
functions for the aggregate exist.
Normally, that's not an issue, because when dropping an existing
aggregate alone, we know that its UDFs also exist. But when dropping
and entire keyspace, we first drop the UDFs, making us unable to drop
the aggregate afterwards.
This patch fixes this behavior by removing the create_aggregate()
from the aggregate dropping implementation and replacing it with
specific calls for getting the aggregate name and signature.
Additionally, a test that would previously fail is added to
cql-pytest/test_uda.py where we drop a keyspace with an aggregate.
Fixes#11327Closes#11375
Some cases in test_wasm.py assumed that all cases
are ran in the same order every time and depended
on values that should have been added to tables in
previous cases. Because of that, they were sometimes
failing. This patch removes this assumption by
adding the missing inserts to the affected cases.
Additionally, an assert that confirms low miss
rate of udfs is more precise, a comment is added
to explain it clearly.
Closes#11367
In commit 7eda6b1e90, we increased the
request_timeout parameter used by cql-pytest tests from the default of
10 seconds to 120 seconds. 10 seconds was usually more than enough for
finishing any Scylla request, but it turned out that in some extreme
cases of a debug build running on an extremely over-committed machine,
the default timeout was not enough.
Recently, in issue #11289 we saw additional cases of timeouts which
the request_timeout setting did *not* solve. It turns out that the Python
CQL driver has two additional timeout settings - connect_timeout and
control_connection_timeout, which default to 5 seconds and 2 seconds
respectively. I believe that most of the timeouts in issue #11289
come from the control_connection_timeout setting - by changing it
to a tiny number (e.g., 0.0001) I got the same error messages as those
reported in #11289. The default of that timeout - 2 seconds - is
certainly low enough to be reached on an extremely over-committed
machine.
So this patch significantly increases both connect_timeout and
control_connection_timeout to 60 seconds. We don't care that this timeout
is ridiculously large - under normal operations it will never be reached.
There is no code which loops for this amount of time, for example.
Refs #11289 (perhaps even Fixes, we'll need to see that the test errors
go away).
NOTE: This patch only changes test/cql-pytest/util.py, which is only
used by the cql-pytest test suite. We have multiple other test suites which
copied this code, and those test suites might need fixing separately.
Signed-off-by: Nadav Har'El <nyh@scylladb.com>
Closes#11295
This pull request introduces global secondary-indexing for non-frozen collections.
The intent is to enable such queries:
```
CREATE TABLE test(int id, somemap map<int, int>, somelist<int>, someset<int>, PRIMARY KEY(id));
CREATE INDEX ON test(keys(somemap));
CREATE INDEX ON test(values(somemap));
CREATE INDEX ON test(entries(somemap));
CREATE INDEX ON test(values(somelist));
CREATE INDEX ON test(values(someset));
-- index on test(c) is the same as index on (values(c))
CREATE INDEX IF NOT EXISTS ON test(somelist);
CREATE INDEX IF NOT EXISTS ON test(someset);
CREATE INDEX IF NOT EXISTS ON test(somemap);
SELECT * FROM test WHERE someset CONTAINS 7;
SELECT * FROM test WHERE somelist CONTAINS 7;
SELECT * FROM test WHERE somemap CONTAINS KEY 7;
SELECT * FROM test WHERE somemap CONTAINS 7;
SELECT * FROM test WHERE somemap[7] = 7;
```
We use here all-familiar materialized views (MVs). Scylla treats all the
collections the same way - they're a list of pairs (key, value). In case
of sets, the value type is dummy one. In case of lists, the key type is
TIMEUUID. When describing the design, I will forget that there is more
than one collection type. Suppose that the columns in the base table
were as follows:
```
pkey int, ckey1 int, ckey2 int, somemap map<int, text>, PRIMARY KEY(pkey, ckey1, ckey2)
```
The MV schema is as follows (the names of columns which are not the same
as in base might be different). All the columns here form the primary
key.
```
-- for index over entries
indexed_coll (int, text), idx_token long, pkey int, ckey1 int, ckey2 int
-- for index over keys
indexed_coll int, idx_token long, pkey int, ckey1 int, ckey2 int
-- for index over values
indexed_coll text, idx_token long, pkey int, ckey1 int, ckey2 int, coll_keys_for_values_index int
```
The reason for the last additional column is that the values from a collection might not be unique.
Fixes#2962Fixes#8745Fixes#10707
This patch does not implement **local** secondary indexes for collection columns: Refs #10713.
Closes#10841
* github.com:scylladb/scylladb:
test/cql-pytest: un-xfail yet another passing collection-indexing test
secondary index: fix paging in map value indexing
test/cql-pytest: test for paging with collection values index
cql, view: rename and explain bytes_with_action
cql, index: make collection indexing a cluster feature
test/cql-pytest: failing tests for oversized key values in MV and SI
cql: fix secondary index "target" when column name has special characters
cql, index: improve error messages
cql, index: fix default index name for collection index
test/cql-pytest: un-xfail several collecting indexing tests
test/cql-pytest/test_secondary_index: verify that local index on collection fails.
docs/design-notes/secondary_index: add `VALUES` to index target list
test/cql-pytest/test_secondary_index: add randomized test for indexes on collections
cql-pytest/cassandra_tests/.../secondary_index_test: fix error message in test ported from Cassandra
cql-pytest/cassandra_tests/.../secondary_index_on_map_entries,select_test: test ported from Cassandra is expected to fail, since Scylla assumes that comparison with null doesn't throw error, just evaluates to false. Since it's not a bug, but expected behavior from the perspective of Scylla, we don't mark it as xfail.
test/boost/secondary_index_test: update for non-frozen indexes on collections
test/cql-pytest: Uncomment collection indexes tests that should be working now
cql, index: don't use IS NOT NULL on collection column
cql3/statements/select_statement: for index on values of collection, don't emit duplicate rows
cql/expr/expression, index/secondary_index_manager: needs_filtering and index_supports_expression rewrite to accomodate for indexes over collections
cql3, index: Use entries() indexes on collections for queries
cql3, index: Use keys() and values() indexes on collections for queries.
types/tuple: Use std::begin() instead of .begin() in tuple_type_impl::build_value_fragmented
cql3/statements/index_target: throw exception to signalize that we didn't miss returning from function
db/view/view.cc: compute view_updates for views over collections
view info: has_computed_column_depending_on_base_non_primary_key
column_computation: depends_on_non_primary_key_column
schema, index/secondary_index_manager: make schema for index-induced mv
index/secondary_index_manager: extract keys, values, entries types from collection
cql3/statements/: validate CREATE INDEX for index over a collection
cql3/statements/create_index_statement,index_target: rewrite index target for collection
column_computation.hh, schema.cc: collection_column_computation
column_computation.hh, schema.cc: compute_value interface refactor
Cql.g, treewide: support cql syntax `INDEX ON table(VALUES(collection))`
Commit 23acc2e848 broke the "--ssl" option of test/cql-pytest/run
(which makes Scylla - and cqlpytest - use SSL-encrypted CQL).
The problem was that there was a confusion between the "ssl" module
(Python's SSL support) and a new "ssl" variable. A rename and a missing
"import" solves the breakage.
We never noticed this because Jenkins does *not* run cql-pytest/run
with --ssl (actually, it no longer runs cql-pytest/run at all).
It is still a useful option for checking SSL-related problems in Scylla
and Seastar.
Signed-off-by: Nadav Har'El <nyh@scylladb.com>
Closes#11292
After collection indexing has been implemented, yet another test which
failed because of #2962 now passes. So remove the "xfail" marker.
Refs #2962
Signed-off-by: Nadav Har'El <nyh@scylladb.com>
When indexing a map column's *values*, if the same value appears more
than once, the same row will appear in the index more than once. We had
code that removed these duplicates, but this deduplication did not work
across page boundaries. We had two xfailing tests to demonstrate this bug.
In this patch we fix this bug by looking at the page's start and not
generating the same row again, thereby getting the same deduplication
we had inside pages - now across pages.
The previously-xfailing tests now pass, and their xfail tag is removed.
I also added another test, for the case where the base table has only
partition keys without clustering keys. This second test is important
because the code path for the partition-key-only case is different,
and the second test exposed a bug in it as well (which is also fixed
in this patch).
Signed-off-by: Nadav Har'El <nyh@scylladb.com>
If a map has several keys with the same value, then the "values(m)" index
must remember all of them as matching the same row - because later we may
remove one of these keys from the map but the row would still need to
match the value because of the remaining keys.
We already had a test (test_index_map_values) that although the same row
appears more than once for this value, when we search for this value the
result only returns the row once. Under the hood, Scylla does find the
same value multiple times, but then eliminates the duplicate matched raw
and returns it only once.
But there is a complication, that this de-duplication does not easily
span *paging*. So in this patch we add a test that checks that paging
does not cause the same row to be returned more than once.
Unfortunately, this test currently fails on Scylla so marked "xfail".
It passes on Cassandra.
Signed-off-by: Nadav Har'El <nyh@scylladb.com>
In issue #9013, we noticed that if a value larger than 64 KB is indexed,
the write fails in a bad way, and we fixed it. But the test we wrote
when fixing that issue already suggested that something was still wrong:
Cassandra failed the write cleanly, with an InvalidRequest, while Scylla
failed with a mysterious WriteFailure (with a relevant error message
only in the log).
This patch adds several xfailing tests which demonstrate what's still
wrong. This is also summarized in issue #8627:
1. A write of an oversized value to an indexed column returns the wrong
error message.
2. The same problem also exists when indexing a collection, and the indexed
key or value is oversized.
3. The situation is even less pleasant when adding an index to a table
with pre-existing data and an oversized value. In this case, the
view building will fail on the bad row, and never finish.
4. We have exactly the same bugs not just with indexes but also with
materialized views. Interestingly, Cassandra has similar bugs in
materialized views as well (but not in the secondary index case,
where Cassandra does behave as expected).
Refs #8627.
Signed-off-by: Nadav Har'El <nyh@scylladb.com>
Unfortunately, we encode the "target" of a secondary index in one of
three ways:
1. It can be just a column name
2. It can be a string like keys(colname) - for the new type of
collection indexes introduced in this series.
3. It can be a JSON map ({ ... }). This form is used for local indexes.
The code parsing this target - target_parser::parse() - needs not to
confuse these different formats. Before this patch, if the column name
contains special characters like braces or parentheses (this is allowed
in CQL syntax, via quoting), we can confuse case 1, 2, and 3: A column
named "keys(colname)" will be confused for case 2, and a column named
"{123}" will be confused with case 3.
This problem can break indexing of some specially-crafted column names -
as reproduced by test_secondary_index.py::test_index_quoted_names.
The solution adopted in this patch is that the column name in case 1
should be escaped somehow so it cannot be possibly confused with either
cases 2 and 3. The way we chose is to convert the column name to CQL (with
column_definition::as_cql_name()). In other words, if the column name
contains non-alphanumeric characters, it is wrapped in quotes and also
quotes are doubled, as in CQL. The result of this can't be confused
with case 2 or 3, neither of which may begin with a quote.
This escaping is not the minimal we could have done, but incidentally it
is exactly what Cassandra does as well, so I used it as well.
This change is *mostly* backward compatible: Already-existing indexes will
still have unescaped column names stored for their "target" string,
and the unescaping code will see they are not wrapped in quotes, and
not change them. Backward compatibility will only fail on existing indexes
on columns whose name begin and end in the quote characters - but this
case is extremely unlikely.
This patch illustrates how un-ideal our index "target" encoding is,
but isn't what made it un-ideal. We should not have used three different
formats for the index target - the third representation (JSON) should
have sufficed. However, two two other representations are identical
to Cassandra's, so using them when we can has its compatibility
advantages.
The patch makes test_secondary_index.py::test_index_quoted_names pass.
Fixes#10707.
Signed-off-by: Nadav Har'El <nyh@scylladb.com>
Before this patch, trying to create an index on entries(x) where x is
not a map results in an error message:
Cannot create index on index_keys_and_values of column x
The string "index_keys_and_values" is strange - Cassandra prints the
easier to understand string "entries()" - which better corresponds to
what the user actually did.
It turns out that this string "index_keys_and_values" comes from an
elaborate set of variables and functions spanning multiple source files,
used to convert our internal target_type variable into such a string.
But although this code was called "index_option" and sounded very
important, it was actually used just for one thing - error messages!
So in this patch we drop the entire "index_option" abstraction,
replacing it by a static trivial function defined exactly where
it's used (create_index_statement.cc), which prints a target type.
While at it, we print "entries()" instead of "index_keys_and_values" ;-)
After this patch, the
test_secondary_index.py::test_index_collection_wrong_type
finally passes (the previous patch fixed the default table names it
assumes, and this patch fixes the expected error messages), so its
"xfail" tag is removed.
Signed-off-by: Nadav Har'El <nyh@scylladb.com>
When creating an index "CREATE INDEX ON tbl(keys(m))", the default name
of the index should be tbl_m_idx - with just "m". The current code
incorrectly used the default name tbl_m_keys_idx, so this patch adds
a test (which passes on Cassandra, and after this patch also on Scylla)
and fixes the default name.
It turns out that the default index name was based on a mysterious
index_target::as_string(), which printed the target "keys(m)" as
"m_keys" without explaining why it was so. This method was actually
used only in three places, and all of them wanted just the column
name, without the "_keys" suffix! So in this patch we rename the
mysterious as_string() to column_name(), and use this function instead.
Now that the default index name uses column_name() and gets just
column_name(), the correct default index name is generated, and the
test passes.
Signed-off-by: Nadav Har'El <nyh@scylladb.com>
After the previous patches implemented collection indexing, several
tests in test/cql-pytest/test_secondary_index.py that were marked
with "xfail" started to pass - so here we remove the xfail.
Only three collection indexing tests continue to xfail:
test_secondary_index.py::test_index_collection_wrong_type
test_secondary_index.py::test_index_quoted_names (#10707)
test_secondary_index.py::test_local_secondary_index_on_collection (#10713)
Signed-off-by: Nadav Har'El <nyh@scylladb.com>
collection fails.
Collection indexing is being tracked by #2962. Global secondary index
over collection is enabled by #10123. Leave this test to track this
behaviour.
Related issue: #10713
ported from Cassandra is expected to fail, since Scylla assumes that
comparison with null doesn't throw error, just evaluates to false. Since
it's not a bug, but expected behavior from the perspective of Scylla, we
don't mark it as xfail.
Currently, the initial values of UDA accumulators are converted
to strings using the to_string() method and from strings using the
from_string() method. The from_string() method is not implemented
for collections, and it can't be implemented without changing the
string format, because in that format, we cannot differentiate
whether a separator is a part of a value or is an actual separator
between values. In particular, the separators are not escaped
in the collection values.
Instead of from_string()/to_string() the cql parser is used
for creating a value from a string (the same , and to_parsable_string()
is used to converting a value into a string.
A test using a list as an accumulator is added to
cql-pytest/test_uda.py.
Signed-off-by: Wojciech Mitros <wojciech.mitros@scylladb.com>
Closes#11250
* github.com:scylladb/scylladb:
cql3: enable collections as UDA accumulators
cql3: extend implementation of to_bytes for raw_value
Currently, the initial values of UDA accumulators are converted
to strings using the to_string() method and from strings using the
from_string() method. The from_string() method is not implemented
for collections, and it can't be implemented without changing the
string format, because in that format, we cannot differentiate
whether a separator is a part of a value or is an actual separator
between values. In particular, the separators are not escaped
in the collection values. For example, a list with string elements:
'a, b', 'c' would be represented as a string 'a, b, c', while now
it is represented as "['a, b', 'c']".
Some types that were parsable are now represented in a different
way. For example, a tuple ('a', null, 0) was represented as
"a:\@:0", and now it is "('a', null, 0)".
Instead of from_string()/to_string() the cql parser is used
for creating a value from a string (the same , and to_parsable_string()
is used to converting a value into a string.
A test using a list as an accumulator is added to
cql-pytest/test_uda.py.
Signed-off-by: Wojciech Mitros <wojciech.mitros@scylladb.com>
This reverts commit 8e892426e2 and fixes
the code in a different way:
That commit moved the scylla_inject_error function from
test/alternator/util.py to test/cql-pytest/util.py and renamed
test/alternator/util.py. I found the rename confusing and unnecessary.
Moreover, the moved function isn't even usable today by the test suite
that includes it, cql-pytest, because it lacks the "rest_api" fixture :-)
so test/cql-pytest/util.py wasn't the right place for it anyway.
test/rest_api/rest_util.py could have been a good place for this function,
but there is another complication: Although the Alternator and rest_api
tests both had a "rest_api" fixture, it has a different type, which led
to the code in rest_api which used the moved function to have to jump
through hoops to call it instead of just passing "rest_api".
I think the best solution is to revert the above commit, and duplicate
the short scylla_inject_error() function. The duplication isn't an
exact copy - the test/rest_api/rest_util.py version now accepts the
"rest_api" fixture instead of the URL that the Alternator version used.
In the future we can remove some of this duplication by having some
shared "library" code but we should do it carefully and starting with
agreeing on the basic fixtures like "rest_api" and "cql", without that
it's not useful to share small functions that operate on them.
Signed-off-by: Nadav Har'El <nyh@scylladb.com>
Closes#11275
Check that the replica returns empty pages as expected, when a large
tombstone prefix/span is present. Large = larger than the configured
query_tombstone_limit (using a tiny value of 10 in the test to avoid
having to write many tombstones).
Implementing json2sstable functionality. It allows generating an sstable from a JSON description of its content. Uses identical schema to dump-data, so it is possible to regenerate an existing sstable, by feeding the output of dump-data to write.
Most of the scylla storage engine features are supported. The only non-supported features are counters and non-strictly atomic data types (including frozen collections, tuples and UDTs).
Example invocation:
```
scylla sstable write --system-schema system_schema.columns --input-file ./input.json --generation 0
```
Refs: https://github.com/scylladb/scylladb/issues/9681
Future plans:
* Complete support for remaining features (counters and non-atomic types).
* Make sstable format configurable on the command line.
Closes#11181
* github.com:scylladb/scylladb:
test/cql-pytest: test_tools.py: add test for sstable write
test/cql-pytest: test-tools.py actually test with multiple sstables
test/cql-pytest: test_tools.py: reduce the number of test-cases
tools/scylla-sstable: introduce the write operation
tools/scylla-sstable: add support for writer operations
tools/scylla-sstable: dump-data: write bound-weight as int
tools/scylla-sstable: dump-data: always write deletion time for cell tombstones
tools/scylla-sstable: dump-data: add timezone to deletion_time
types: publish timestamp_from_string()
We can now do a full circle: dump an sstable to json, generate an
sstable from it, then dump again and compare to the original json.
Expand the existing simple_no_clustering_table and
simple_clustering_table schema/data to improve coverage of things like
TTL, tombstones and static rows.
The test-cases in this suite have a parameter to run with one or
multiple input sstables. This was broken as each test table generated a
single sstable. Fix this so we actually get single/multiple input
sstable coverage.
Currently this test-case exercises all the available component dumpers
with many different schemas. This doesn't add any value for most of the
dumpers, save for the dump-data one. It does have a cost however in
run-time of these test-cases. Test the dumpers which are mostly
indifferent to the schema with just a single one, cutting the number of
generated test-cases from 70 to 30.
When stopping the read, the multishard reader will dismantle the
compaction state, pushing back (unpopping) the currently processed
partition's header to its originating reader. This ensures that if the
reader stops in the middle of a partition, on the next page the
partition-header is re-emitted as the compactor (and everything
downstream from it) expects.
It can happen however that there is nothing more for the current
partition in the reader and the next fragment is another partition.
Since we only push back the partition header (without a partition-end)
this can result in two partitions being emitted without being separated
by a partition end.
We could just add the missing partition-end when needed but it is
pointless, if the partition has no more data, just drop the header, we
won't need it on the next page.
The missing partition-end can generate an "IDL frame truncated" message
as it ends up causing the query result writer to create a corrupt
partition entry.
Fixes: https://github.com/scylladb/scylladb/issues/9482Closes#11175
* github.com:scylladb/scylladb:
test/cql-pytest: add regression test for "IDL frame truncated" error
mutation_compactor: detach_state(): make it no-op if partition was exhausted
querier: use full_position in shard_mutation_querier
Calling WebAssembly UDFs requires wasmtime instance. Creating such an instance is expensive,
but these instances can be reused for subsequent calls of the same UDF on various inputs.
This patch introduces a way of reusing wasmtime instances: a wasm instance cache.
The cache stores a wasmtime instance for each UDF and scheduling group. The instances are
evicted using LRU strategy and their size is based on the size of their wasm memories.
The instances stored in the cache are also dropped when the UDF is dropped itself. For that reason,
the first patch modifies the current implementation of UDF dropping, so that the instance dropping may be added
later. The patch also removes the need of compiling the UDF again when dropping it.
The second patch contains the implementation and use of the new cache. The cache is implemented
in `lang/wasm_instance_cache.hh` and the main ways of using it are the `run_script` methods from `wasm.hh`
The third patch adds tests to `test_wasm.py` that check the correctness and performance of the new
cache. The tests confirm the instance reuse, size limits, instance eviction after timeout and after dropping the UDF.
Closes#10306
* github.com:scylladb/scylladb:
wasm: test instances reuse
wasm: reuse UDF instances
schema_tables: simplify merge_functions and avoid extra compilation
and return status over the rest api' from Aleksandra Martyniuk
Currently, scrub returns to user the number indicating operation
result as follows:
- 1 when the operation was aborted;
- 3 in validate and segregate modes when validation errors were found
(and in segregate mode - fixed);
- 0 if operation ended successfully.
To achieve so, if an operation was aborted in abort mode, then
the exception is propagated to storage_service.cc. Also the number
of validation errors for current scrub is gathered and summed
from each shard there.
The number of validation errors is counted and registered in metrics.
Metrics provide common counters for all scrub operation within
a compaction manager, though. Thus, to check the exact number
of validation errors, the comparison of counter value before and after
scrub operation needs to be done.
Closes#11074
* github.com:scylladb/scylladb:
scrub compaction: return status indicating aborted operations over the rest api
test: move scylla_inject_error from alternator/ to cql-pytest/
scrub compaction: count validation errors and return status over the rest api
scrub compaction: count validation errors for specific scrub task
compaction: extract statistics in compaction_result
scrub compaction: register validation errors in metrics
scrub compaction: count validation errors
This reverts commit c3bad157e5, reversing
changes made to e66809d051. The checks it
adds are triggered by some dtests. While it's possible the check is
triggered due to an existing problem, better to investigate it out-of-tree.
Fixes#11169.
Move scylla_inject_error from alternator/ to cql-pytest/ so it
can be reached from various tests dirs. alternator/util.py is
renamed to alternator/alternator_util.py to avoid name shadowing.
This pull request introduces a "synchronous mode" for global views. In this mode, all view updates are applied synchronously as if the view was local.
Marking view as a synchronous one can be done using `CREATE MATERIALIZED VIEW` and `ALTER MATERIALIZED VIEW`. E.g.:
```cql
ALTER MATERIALIZED VIEW ks.v WITH synchronous_updates = true;
```
Marking view as a synchronous one was done using tags (originally used by alternator). No big modifications in the view's code were needed.
Fixes: https://github.com/scylladb/scylla/issues/10545Closes#11013
* github.com:scylladb/scylla:
cql-pytest: extend synchronous mv test with new cases
cql-pytest: allow extra parameters in new_materialized_view
docs: add a paragraph on view synchronous updates
test/boost/cql_query_test: add test setting synchronous updates property
test: cql-pytest: add a test for synchronous mode materialized views
db: view: react to synchronous updates tag
cql3: statements: cf_prop_defs: apply synchronous updates tag
alternator, db: move the tag code to db/tags
cql3: statements: add a synchronous_updates property
The new cases cover:
- a materialized view created with synchronous updates from the start
- a materialized view created with synchronous updates,
but then alter to not have synchronous updates anymore
The test verifies if a synchronous updates code path was triggered in a
view that had synchronous_updates property set to true.
Done by inspecting query traces.
The cql-pytest cassandra_tests/validation/operations/select_test.py::
testSelectWithAlias uses a TTL but not because it wants to test the TTL
feature - it just wants to check the SELECT aliasing feature. The test
writes a TTL of 100 and then reads it back using an alias. We would
normally expect to read back 100 or 99, but to guard against a very slow
test machine, the test verified that we read back something between 70
and 100. I thought that allowing a ridiculous 30 second delay between
the write and the read requests was more than enough.
But in one run of the aarch64 debug build, this ridiculous 30 seconds
wasn't ridiculous enough - the delay ended up 35 seconds, and the
test failed!
So in this patch, I just make it even more ridiculous - we write 1000
and expect to read something over 100 - allowing a 900 second delay
in the test.
Note that neither the earlier 30-second or current 900-second delay
slows down the test in any way - this test will normally complete in
milliseconds.
Signed-off-by: Nadav Har'El <nyh@scylladb.com>
Closes#11085
Add a test for a wasm aggregate function
which uses the new metrics to check if the cache has
been hit at least once.
Also check that the cache can get reused on different
queries, by testing that the number of queries is
higher than the number of cache misses.
Signed-off-by: Wojciech Mitros <wojciech.mitros@scylladb.com>
When executing a wasm UDF, most of the time is spent on
setting up the instance. To minimize its cost, we reuse
the instance using wasm::instance_cache.
This patch adds a wasm instance cache, that stores
a wasmtime instance for each UDF and scheduling group.
The instances are evicted using LRU strategy. The
cache may store some entries for the UDF after evicting
the instance, but they are evicted when the corresponding
UDF is dropped, which greatly limits their number.
The size of stored instances is estimated using the size
of their WASM memories. In order to be able to read the
size of memory, we require that the memory is exported
by the client.
Signed-off-by: Wojciech Mitros <wojciech.mitros@scylladb.com>
This series adds the infrastructure needed for testing user permissions, like the ability to create temporary roles and CQL sessions which log in as different users, and a few initial test cases for granting and revoking permissions.
Closes#10998
* github.com:scylladb/scylla:
cql-pytest: add a case for granting/revoking data permissions
cql-pytest: add new_user and new_session utils
cql-pytest: speed up permissions refresh period for tests
This PR introduces improvements to `expr::to_restriction` and prepares the validation part for restriction classes removal.
`expr::to_restriction` is currently used to take a restriction from the WHERE clause, prepare it, perform some validation checks and finally convert it to an instance of the restriction class.
Soon we will get rid of the restriction class.
In preparation for that `expr::to_restriction` is split into two independent parts:
* The part that prepares and validates a binary_operator
* The part that converts a binary_operator to restriction
Thanks to this split getting rid of restriction class will be painless, we will just stop using the second part.
`to_restriction.cc` is replaced by `restrictions.hh/cc`. In the future we can put all the restriction expressions code there to avoid clutter in `expression.hh/cc`.
This change made it much easier to fix#10631, so I did that as well.
Fixes: #10631Closes#10979
* github.com:scylladb/scylla:
cql-pytest: Test that IS NOT only accepts NULL
cql-pytest: Enable testInvalidCollectionNonEQRelation
cql3: Move single element IN restrictions handling
cql3: Check for disallowed operators early
cql3: Simplify adding restrictions
cql3: Reorganize to_restriction code
cql3: Fix IS NOT NULL check in to_restriction
cql3: Swap order of arguments in error message
The IS_NOT operator can only be used during materialized view creation
and it can only be used to express IS NOT NULL.
Trying to write something like IS NOT 42 should cause an error.
Signed-off-by: Jan Ciolek <jan.ciolek@scylladb.com>
The default refresh period for permissions in both Scylla and Cassandra
is 2 seconds, which is usually perfectly fine for production
environments, but it introduces a significant delay in automatic
test cases. The refresh period is hereby set to 100ms, which allows
test_permissions.py cases to run in around 1s for Scylla instead of
tens of seconds.
Recently we noticed a regression where with certain versions of the fmt
library,
SELECT value FROM system.config WHERE name = 'experimental_features'
returns string numbers, like "5", instead of feature names like "raft".
It turns out that the fmt library keep changing their overload resolution
order when there are several ways to print something. For enum_option<T> we
happen to have to conflicting ways to print it:
1. We have an explicit operator<<.
2. We have an *implicit* convertor to the type held by T.
We were hoping that the operator<< always wins. But in fmt 8.1, there is
special logic that if the type is convertable to an int, this is used
before operator<<()! For experimental_features_t, the type held in it was
an old-style enum, so it is indeed convertible to int.
The solution I used in this patch is to replace the old-style enum
in experimental_features_t by the newer and more recommended "enum class",
which does not have an implicit conversion to int.
I could have fixed it in other ways, but it wouldn't have been much
prettier. For example, dropping the implicit convertor would require
us to change a bunch of switch() statements over enum_option (and
not just experimental_features_t, but other types of enum_option).
Going forward, all uses of enum_option should use "enum class", not
"enum". tri_mode_restriction_t was already using an enum class, and
now so does experimental_features_t. I changed the examples in the
comments to also use "enum class" instead of enum.
This patch also adds to the existing experimental_features test a
check that the feature names are words that are not numbers.
Fixes#11003.
Signed-off-by: Nadav Har'El <nyh@scylladb.com>
Closes#11004
