This commit declares shared_ptr<user_types_metadata> in
database.hh were user_types_metadata is an incomplete type so
it requires
"Allow to use shared_ptr with incomplete type other than sstable"
to compile correctly.
Signed-off-by: Piotr Jastrzebski <piotr@scylladb.com>
Commit fd422c954e aimed to fix
issue #3803. In that issue, if a query SELECTed only certain columns but
did filtering (ALLOW FILTERING) over other unselected columns, the filtering
didn't work. The fix involved adding the columns being filtered to the set
of columns we read from disk, so they can be filtered.
But that commit included an optimization: If you have clustering keys
c1 and c2, and the query asks for a specific partition key and c1 < 3 and
c2 > 3, the "c1 < 3" part does NOT need to be filtered because it is already
done as a slice (a contiguous read from disk). The committed code erroneously
concluded that both c1 and c2 don't need to be filtered, which was wrong
(c2 *does* need to be read and filtered).
In this patch, we fix this optimization. Previously, we used the "prefix
length", which in the above example was 2 (both c1 and c2 were filtered)
but we need a new and more elaborate function,
num_prefix_columns_that_need_not_be_filtered(), to determine we can only
skip filtering of 1 (c1) and cannot skip the second.
Fixes#4121. This patch also adds a unit test to confirm this.
Signed-off-by: Nadav Har'El <nyh@scylladb.com>
Message-Id: <20190123131212.6269-1-nyh@scylladb.com>
"
This series prepares for the integration of the `master` branch of
Seastar back into Scylla.
A number of changes to the existing build are necessary to integrate
Seastar correctly, and these are detailed in the individual change
messages.
I tested with and without DPDK, in release and debug mode.
The actual switch is a separate patch.
"
* 'jhk/seastar_cmake/v4' of https://github.com/hakuch/scylla:
build: Fix link order for DPDK
tests: Split out `sstable_datafile_test`
build: Remove unnecessary inclusion
tests: Fix use-after-free errors in static vars
build: Remove Seastar internals
build: Only use Seastar flags from pkg-config
build: Query Seastar flags using pkg-config
build: Change parameters for `pkg_config` function
Recently we had a bug (#4096) due to a component
(`multishard_mutation_query()`) assuming that all reads used the
semaphore obtainable via `database::user_read_concurrency_sem()`.
This problem revealed that it is plain wrong to allow access to the
shard-global semaphores residing in the database object. Instead all
code wishing to access the relevant semaphore for some read, should do
so via the relevant `table` object, thus guaranteeing that it will get
the correct semaphore, configured for that table.
Signed-off-by: Botond Dénes <bdenes@scylladb.com>
Message-Id: <4f3a6780eb3240822db34aba7c1ba0a675a96592.1547734212.git.bdenes@scylladb.com>
Many area of the code are splattered with unneeded templates. This patchset replaces
some of them, where the template parameter is a function object, with an std::function
or noncopyable_function (with a preference towards the latter; but it is not always
possible). As the template is compiled for each instantiation (if the function
object is a lambda) while a function is compiled only once, there are significant
savings in compile time and bloat.
text data bss dec hex filename
85160690 42120 284910 85487720 5187068 scylla.before
84824762 42120 284910 85151792 5135030 scylla.after
* https://github.com/avikivity/scylla detemplate/v2:
api/commitlog: de-template acquire_cl_metric()
database: de-template do_parse_schema_tables
database: merge for_all_partitions and for_all_partitions_slow
hints: de-template scan_for_hints_dirs()
schema_tables: partially de-template make_map_mutation()
distributed_loader: de-template
tests: commitlog_test: de-template
tests: cql_auth_query_test: de-template
test: de-template eventually() and eventually_true()
tests: flush_queue_test: de-template
hint_test: de-template
tests: mutation_fragment_test: de-template
test: mutation_test: de-template
The internal test_propagation template is instantiated many times. Replace
with an oridinary function to reduce bloat. Call sites adjusted to have a
uniform signature.
Otherwise read test results for subsequent datasets will override each other.
Also, rename population test case to not include dataset name, which
is now redundant.
Message-Id: <1547822942-9690-1-git-send-email-tgrabiec@scylladb.com>
When entering a new ck range (of the partition-slice), the partition
snapshot reader will apply to its range tombstones stream all the
tombstones that are relevant to the new ck range. When the partition has
range tombstones that overlap with multiple ck ranges, these will be
applied to the range tombstone stream when entering any of the ck ranges
they overlap with. This will result in the violation of the monotonicity
of the mutation fragments emitted by the reader, as these range
tombstones will be re-emitted on each ck range, if the ck range has at
least one clustering row they apply to.
For example, given the following partition:
rt{[1,10]}, cr{1}, cr{2}, cr{3}...
And a partition-slice with the following ck ranges:
[1,2], [3, 4]
The reader will emit the following fragment stream:
rt{[1,10]}, cr{1}, cr{2}, rt{[1,10]}, cr{3}, ...
Note how the range tombstone is emitted twice. In addition to violating
the monotonicity guarantee, this can also result in an explosion of the
number of emitted range tombstones.
Fix by applying only those range tombstones to the range tombstone
stream, that have a position strictly greater than that of the last
emitted clustering row (or range tombstone), when entering a new ck
range.
Fixes: #4104
Signed-off-by: Botond Dénes <bdenes@scylladb.com>
Message-Id: <e047af76df75972acb3c32c7ef9bb5d65d804c82.1547916701.git.bdenes@scylladb.com>
At the moment are inefficiencies in how
collection_type_impl::mutation::compact_and_expire( handles tombstones.
If there is a higher-level tombstone that covers the collection one
(including cases where there is no collection tombstone) it will be
applied to the collection tombstone and present in the compaction
output. This also means that the collection tombstone is never dropped
if fully covered by a higher-level one.
This patch fixes both those problems. After the compaction the
collection tombstone is either unchanged or removed if covered by a
higher-level one.
Fixes#4092.
Message-Id: <20190118174244.15880-1-pdziepak@scylladb.com>
Many area of the code are splattered with unneeded templates. This patchset replaces
some of them, where the template parameter is a function object, with an std::function
or noncopyable_function (with a preference towards the latter; but it is not always
possible). As the template is compiled for each instantiation (if the function
object is a lambda) while a function is compiled only once, there are significant
savings in compile time and bloat.
text data bss dec hex filename
85160690 42120 284910 85487720 5187068 scylla.before
84824762 42120 284910 85151792 5135030 scylla.after
* https://github.com/avikivity/scylla detemplate/v1:
api/commitlog: de-template acquire_cl_metric()
database: de-template do_parse_schema_tables
database: merge for_all_partitions and for_all_partitions_slow
hints: de-template scan_for_hints_dirs()
schema_tables: partially de-template make_map_mutation()
distributed_loader: de-template
tests: commitlog_test: de-template
tests: cql_auth_query_test: de-template
test: de-template eventually() and eventually_true()
tests: flush_queue_test: de-template
hint_test: de-template
tests: mutation_fragment_test: de-template
test: mutation_test: de-template
The internal test_propagation template is instantiated many times. Replace
with an oridinary function to reduce bloat. Call sites adjusted to have a
uniform signature.
Previously the utility to extract paging state asserted
that the state exists, but in future tests it would be useful
to be able to call this function even if it would return null.
"
This series adds generating view updates from sstables added through
/upload directory if their tables have accompanying materialized views.
Said sstables are left in /upload directory until updates are generated
from them and are treated just like staging sstables from /staging dir.
If there are no views for a given tables, sstables are simply moved
from /upload dir to datadir without any changes.
Tests: unit (release)
"
* 'add_handling_staging_sstables_to_upload_dir_5' of https://github.com/psarna/scylla:
all: rename view_update_from_staging_generator
distributed_loader: fix indentation
service: add generating view updates from uploaded sstables
init: pass view update generator to storage service
sstables: treat sstables in upload dir as needing view build
sstables,table: rename is_staging to requires_view_building
distributed_loader: use proper directory for opening SSTable
db,view: make throttling optional for view_update_generator
Presence checker is constructed and destroyed in the standard
allocator context, but the presence check was invoked in the LSA
context. If the presence checker allocates and caches some managed
objects, there will be alloc-dealloc mismatch.
That is the case with LeveledCompactionStrategy, which uses
incremental_selector.
Fix by invoking the presence check in the standard allocator context.
Fixes#4063.
Message-Id: <1547547700-16599-1-git-send-email-tgrabiec@scylladb.com>
"
This mini-series adds counters for the inactive reads registered in the
reader concurrency semaphore.
"
* 'reader-concurrency-semaphore-counters/v6' of https://github.com/denesb/scylla:
tests/querier_cache: use stats to get the no. of inactive reads
reader_concurrency_semaphore: add counters for inactive reads
At the moment Scylla supports only frozen UDTs but
the code should be able to handle non-frozen UDTs as well.
Signed-off-by: Piotr Jastrzebski <piotr@scylladb.com>
Serialization header stores column types for all
columns in sstable. If any of them is a UDT then it
has to be wrapped into
"org.apache.cassandra.db.marshal.FrozenType(...)".
This patch adds a test case to verify that.
Signed-off-by: Piotr Jastrzebski <piotr@scylladb.com>
This renames some variables and functions to make it clear that they
refer to partitions and not rows.
Old versions of sstablemetadata used to refer to a row histogram, but
current versions now mention a partition histogram instead.
This patch doesn't change the exposed API names.
Signed-off-by: Rafael Ávila de Espíndola <espindola@scylladb.com>
Message-Id: <20181229223311.4184-2-espindola@scylladb.com>
Replace stdx::optional and stdx::string_view with the C++ std
counterparts.
Some instances of boost::variant were also replaced with std::variant,
namely those that called seastar::visit.
Scylla now requires GCC 8 to compile.
Signed-off-by: Duarte Nunes <duarte@scylladb.com>
Message-Id: <20190108111141.5369-1-duarte@scylladb.com>
