scylladb/docs/faq.rst

==============
ScyllaDB FAQ
==============

.. meta::
   :title:
   :description: Frequently Asked Questions about ScyllaDB
   :keywords: questions, Scylla, ScyllaDB, DBaaS, FAQ, error, problem

Performance
-----------

Scylla is using all of my memory! Why is that? What if the server runs out of memory?
^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
Scylla uses available memory to cache your data. Scylla knows how to dynamically manage memory for optimal performance; for example, if many clients connect to Scylla, it will evict some data from the cache to make room for these connections; when the connection count drops again, this memory is returned to the cache.

Can I limit Scylla to use less CPU and memory?
^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
The :code:`--smp` option (for instance, :code:`--smp 2`) will restrict Scylla to a smaller number of CPUs. It will still use 100 % of those CPUs, but at least won’t take your system out completely. An analogous option exists for memory: :code:`-m`.

What are some of the techniques Scylla uses to achieve its performance?
^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
Scylla tries to utilize all available resources (processor cores, memory, storage, and networking) by always operating in parallel and never blocking. If Scylla needs to read a disk block, it initiates the read and immediately moves on to another task. Later, when the read completes Scylla resumes the original task from where it left off. By never blocking, a high degree of concurrency is achieved, allowing all resources to be utilized to their limit.
Read more on Scylla Architecture:

* `Scylla Technology <http://www.scylladb.com/product/technology/>`_
* `Scylla Memory Management <http://www.scylladb.com/product/technology/memory-management/>`_

I thought that Scylla's underlying `Seastar framework <https://github.com/scylladb/seastar>`_ uses one thread per core, but I see more than two threads per core. Why?
^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
Seastar creates an extra thread per core for blocking syscalls (like :code:`open()`/ :code:`fsync()` / :code:`close()` ); this allows the Seastar reactor to continue executing while a blocking operation takes place. Those threads are usually idle, so they don’t contribute to significant context switching activity.

I’m seeing X compaction running in parallel on a single Scylla node. Is it normal?
^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
Yes, for more than one reason:

* each shard (core) will run its compactions independently, often at the same time,
* each table will run its compactions independently, often at the same time
* depending on the compaction strategy, more than one compaction can run in parallel. For example in Sized Tier Compaction Strategy (STCS), large sstable compaction can take time, allowing smaller sstable to be compacted at the same time

.. _faq-io:

Setting io.conf configuration for HDD storage
^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
As part of the Scylla setup process, **iotune** runs a short benchmark of your storage. When completed, it generates the `/etc/scylla.d/io.conf` configuration file. Note that iotune has known issues benchmarking HDD storage.

.. note:: This section is not relevant in 2.3

Therefore, when using Scylla with HDD storage, it is recommended to use RAID0 on all of your available disks, and manually update the `io.conf` configuration file `max-io-request` parameter. This parameter sets the number of concurrent requests sent to the storage. The value for this parameter should be 3X (3 times) the number of your disks. For example, if you have 3 disks, you would set `max-io-request=9`.

How many connections is it recommended to open from each Scylla client application?
^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^

As a rule of thumb, for Scylla's best performance, each client needs at least 1-3 connection per Scylla core.
For example, a cluster with three nodes, each node with 16 cores, each client application should open 32 (2x16) connections to each Scylla node.

Do I need to configure ``swap`` on a Scylla node?
^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^

Yes, configuring ``swap`` on a Scylla node is recommended.
``swap`` size should be set to either ``total_mem``/3 or 16GB - lower of the two.

``total_mem`` is the total size of the nodes memory.

For example:

* If the node ``total_mem`` is 18GB ``swap`` size should be set to 6GB.

* If the node ``total_mem`` is 240GB ``swap`` size should be set to 16GB.

Swap can be set up in several ways. One way to set up swap is detailed in the KB Article :doc:`How to Set up a Swap Space </kb/set-up-swap>`.

My query does not return any or some of the data? What happened?
^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
If you are using a time range in the query, refer to the solution in the troubleshooting document, :doc:`Time Range Queries Do Not Return Some or All of the Data </troubleshooting/time-zone>`.


DESC SCHEMA shows that I am using many materialized views (MVs) when I know I only added Secondary Indexes (SI). Why are there MVs in my schema?
^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^

As SI is built on top of MV, you can expect to see MV in your schema. There is nothing wrong with your system. More information on :doc:`Global Secondary Indexes </using-scylla/secondary-indexes>`.


Using the Java driver SimpleStatements are slow. Why does this happen?
^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^

The Java driver's `SimpleStatement <https://java-driver.docs.scylladb.com/stable/manual/statements/simple/>`_ is token unaware by default. This means that requests sent out will reach the Controller node before it is known which shard it's supposed to access. We suggest using `PreparedStatements <https://java-driver.docs.scylladb.com/stable/manual/statements/prepared/>`_ instead.

Disk Space
-----------

.. _reclaim-space:

Dropping a table does not reduce storage used by Scylla, how can I clean the disk from dropped tables?
^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
scylla.yaml includes an ``auto_snapshot`` parameter; when true (it is by default), Scylla creates a snapshot for a table just before dropping it, as a safety measure.
You can find the snapshot in the ``snapshots`` directory, under the table SSTable. For example, for dropped table ``users`` in keyspace ``mykeyspace``:

:code:`/var/lib/scylla/data/mykeyspace/users-bdba4e60f6d511e7a2ab000000000000/snapshots/1515678531438-users`


As the snapshot take the same space as the dropped table, disk usage will remain the same.
You can clean snapshots by using :doc:`nodetool clearsnapshot </operating-scylla/nodetool-commands/clearsnapshot>`. Read more on :doc:`snapshot and clearsnapshot </operating-scylla/procedures/backup-restore/delete-snapshot/>`
  
Features
--------
I want to try out new features.  How do I enable experimental mode?
^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
You need to add the line :code:`experimental: true`  to your :code:`scylla.yaml` file.

1. Launch the file in a text editor: :code:`$ vi /etc/scylla/scylla.yaml`. (Alternately, on docker, it's :code:`$ docker exec -it your_node vi /etc/scylla/scylla.yaml`);
2. Add the line :code:`experimental: true`;
3. Save the file and exit.
4. Stop and restart the node. 

   On RedHat Enterprise Linux, CentOS or Ubuntu:
   
   :code:`$ sudo systemctl restart scylla-server`
   
   On Docker:  
   
   :code:`$ docker stop <your_node> && docker start <your_node>`

   Alternately, starting from Scylla 2.0, you can start Scylla for Docker with the :code:`experimental` flag as follows:

   :code:`$ docker run --name <your_node> -d scylladb/scylla --experimental 1`

You should now be able to use the experimental features available in your version of Scylla.

How do I check the current version of Scylla that I am running?
^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
* On a regular system or VM (running Ubuntu, CentOS, or RedHat Enterprise): :code:`$ scylla --version`

Check the :doc:`Operating System Support Guide </getting-started/os-support>` for a list of supported operating systems and versions.

* On a docker node: :code:`$ docker exec -it Node_Z scylla --version`

I am upgrading my nodes to a version that uses a newer SSTable format, when will the nodes start using the new SSTable format?
^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^

The :doc:`new "mc" SSTable format</architecture/sstable/sstable3/index>` is supported in Scylla 3.0 and later.
Scylla only starts using the newer format when every node in the cluster is capable to generate it.
Therefore, only when all nodes in the cluster are upgraded the new format is used.

Docker
-------

What if I get an error when connecting an application to a ScyllaDB cluster in Docker?
^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^

Connectivity problems may occur if you are trying to connect to the ScyllaDB nodes with their Docker internal IP addresses.

If you need to reach your nodes from outside the internal Docker network, you must expose the appropriate ports to the Docker host. 
See `Error connecting Java Spring application to ScyllaDB Cluster in Docker <https://stackoverflow.com/questions/72165195/error-connecting-java-spring-application-to-scylladb-cluster-in-docker>`_ for more information and an example.


Installation
------------
Can I install Scylla on an Apache Cassandra server?
^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
Scylla comes with its own version of the Apache Cassandra client tools, in the package :code:`scylla-tools`. Trying to install it on a server with Cassandra already installed may result in something like:

.. code-block:: console

   Unpacking scylla-tools (1.0.1-20160411.b9fe89b-ubuntu1) ...
   dpkg: error processing archive /var/cache/apt/archives/scylla-tools_1.0.1-20160411.b9fe89b-ubuntu1_all.deb (--unpack):
   trying to overwrite '/usr/bin/nodetool', which is also in package cassandra 2.1.4

We recommend uninstalling Apache Cassandra before installing :code:`scylla-tools`.

.. _faq-pinning:

Can I install or upgrade to a patch release other than latest on Debian or Ubuntu?
^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^

The APT package manager used for Ubuntu, Debian, and image installations of ScyllaDB installs the latest patch 
release (x.y.z) of a given major release (x.y). To remain on a ScyllaDB patch release that is not the latest, you can 
use pinning as a workaround.

The following example shows pinning ScyllaDB Enterprise version 2021.1.0-0.20210511.9e8e7d58b-1:

.. code-block:: console

   $ cat <<EOF | sudo tee /etc/apt/preferences.d/99scylla-enterprise
   Package: scylla-enterprise*
   Pin: version 2021.1.0-0.20210511.9e8e7d58b-1
   Pin-Priority: 1001
   EOF

Pinning may be particularly useful when you want to downgrade ScyllaDB or upgrade to a version that is not the latest 
available version. See `this article <https://help.ubuntu.com/community/PinningHowto>`_ for details about pinning on Debian-based systems.

Alternatively, you can explicitly install **all** the ScyllaDB packages for the desired non-latest version. For example:

.. code-block:: console

   sudo apt-get install scylla-enterprise{,-server,-jmx,-tools,-tools-core,-kernel-conf,-node-exporter,-conf,-python3}=2021.1.0-0.20210511.9e8e7d58b-1
   sudo apt-get install scylla-enterprise-machine-image=2021.1.0-0.20210511.9e8e7d58b-1  # only execute on AMI instance



.. _faq-snitch-strategy:

Which snitch or replication strategy should I use?
^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
If you are creating a production cluster or if your cluster is going to have more than one data center you need to use a **DC-aware** snitch, e.g. :code:`GossipingPropertyFileSnitch` or :code:`Ec2MultiRegionSnitch`. You will also need to use a **DC-aware** replication strategy, e.g. :code:`NetworkTopologyStrategy`.

Our general recommendation is to always use a :code:`NetworkTopologyStrategy` and use :code:`Ec2XXX` snitches on AWS based clusters and :code:`GossipingPropertyFileSnitch` in all other cases.

A description of all snitch options we support may be found here: `Snitches <https://github.com/scylladb/scylla/wiki/Snitches>`_.

Note: trying to mix a :code:`SimpleSnitch` with a :code:`DC-aware strategy` or a :code:`DC-aware snitch` with a :code:`SimpleStrategy` may cause your cluster not to work as intended therefore we **strongly discourage** these types of configurations in general.

Not using a proper snitch-strategy combination may cause different types of errors.

For instance:

.. code-block:: console

   Unavailable: code=1000 [Unavailable exception] message="Cannot achieve consistency level for cl LOCAL_ONE. Requires 1, alive 0" info={'required_replicas': 1, 'alive_replicas': 0, 'consistency': 'LOCAL_ONE'}

If you see this error you should always check that you are not using a :code:`SimpleSnitch` in your cluster configuration in conjunction with some :code:`DC-aware replication strategy` for a keyspace of a table you are failing to query.

When working with ``GossipingPropertyFileSnitch`` or ``Ec2MultiRegionSnitch`` you should edit the ``cassandra-rackdc.properties``

For node using ``GossipingPropertyFileSnitch``, the file should look like the following:

.. code-block:: cql

   dc=asia_datacenter
   rack=rack1
   prefer_local= true

When the node is the Asia data center, on rack1 and to minimize BW usage
for inter-datacenter, use the prefer_local

For ``Ec2MultiRegion`` the file should include the following information

.. code-block:: cql
   
   dc_suffix=my_dc

This will create a suffix for the node location for example:

.. code-block:: cql

   us-east1_my_dc


The problem may also arise if you are using some :code:`DC-aware snitch`, e.g. :code:`Ec2MultiRegionSnitch`, and a :code:`SimpleStrategy` in a multi-DC cluster.

Please make sure that both the snitch and the replication strategy of the keyspace are :code:`DC-aware`.

After that, if you are using a :code:`DC-aware` configuration, make sure that the replication strategy uses the proper data centers' names. Verify the data centers names in your cluster using a :code:`nodetool status` command.

Can I change the replication factor (a keyspace) on a live cluster?
^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^

Yes, but it will require running a full repair (or cleanup) to change the replica count of existing data:

- :ref:`Alter <alter-keyspace-statement>` the replication factor for desired keyspace (using cqlsh for instance).
- If you're reducing the replication factor, run ``nodetool cleanup <updated Keyspace>`` on the keyspace you modified to remove surplus replicated data.
  Cleanup runs on a per-node basis.
- If you're increasing the replication factor, refer to :doc:`How to Safely Increase the RF </kb/rf-increase>`
- Note that you need to provide the keyspace namr. If you do not, the cleanup or repair operation runs on all keyspaces for the specific node.

Why can't I set ``listen_address`` to listen to 0.0.0.0 (all my addresses)?
^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^

Scylla is a gossip-based distributed system and ``listen_address`` is the address a node tells other nodes to reach
it at. Telling other nodes "contact me on any of my addresses" is a bad idea; if different nodes in the cluster pick
different addresses for you, Bad Things happen.

If you don't want to manually specify an IP to ``listen_address`` for each node in your cluster (understandable!), leave
it blank and Scylla will use ``InetAddress.getLocalHost()`` to pick an address. Then it's up to you or your ops team
to make things resolve correctly (``/etc/hosts/``, dns, etc).

.. _faq-best-scenario-node-multi-availability-zone:

What is the best scenario to add a node to a multi availability zone (AZ)?
^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^

If using three node cluster, with RF=3, each node located on a different availability zone (AZ).

For example:

.. code-block:: shell

   Datacenter: DC1
   Status=Up/Down
   State=Normal/Leaving/Joining/Moving
   --  Address        Load       Tokens  Owns (effective)                         Host ID         Rack
   UN  192.168.1.201  118.82 KB  256     33.6%             8d5ed9f4-7764-4dbd-bad8-43fddce94b7c   A1
   UN  192.168.1.202  111.82 KB  256     33.1%             8d5ed9f4-7764-4dbd-bad8-43fddce94b7c   B1
   UN  192.168.1.203  114.82 KB  256     33.3%             8d5ed9f4-7764-4dbd-bad8-43fddce94b7c   C1

All nodes holds 100% of the data.
If needed to add a single node to the cluster (scale out), the cluster will become imbalance.
Because the single additional node will split the tokens only with the existing node in the same AZ.

.. Note:: 

   This is only an example, if having more nodes or different RF the number of nodes may be different.


The token distribution will be:

.. code-block:: shell

   AZ A1 node A: 100% of the data
   AZ B1 node B: 100% of the data
   AZ C1 node C: 50% of the data
   AZ C1 node D: 50% of the data

The solution is to add a node in each AZ.

.. code-block:: shell

   Datacenter: DC1
   Status=Up/Down
   State=Normal/Leaving/Joining/Moving
   --  Address        Load       Tokens  Owns (effective)                         Host ID         Rack
   UN  192.168.1.201  118.82 KB  256     16.6%             8d5ed9f4-7764-4dbd-bad8-43fddce94b7c   A1
   UN  192.168.1.202  111.82 KB  256     16.1%             8d5ed9f4-7764-4dbd-bad8-43fddce94b7c   B1
   UN  192.168.1.203  114.82 KB  256     16.3%             8d5ed9f4-7764-4dbd-bad8-43fddce94b7c   C1
   UN  192.168.1.204  118.82 KB  256     16.6%             8d5ed9f4-7764-4dbd-bad8-43fddce94b7c   A1
   UN  192.168.1.205  111.82 KB  256     16.1%             8d5ed9f4-7764-4dbd-bad8-43fddce94b7c   B1
   UN  192.168.1.206  114.82 KB  256     16.3%             8d5ed9f4-7764-4dbd-bad8-43fddce94b7c   C1

More info
---------
Where can I ask a question not covered here?
^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^

* `ScyllaDB Community Forum <https://forum.scylladb.com>`_: Discuss using ScyllaDB and developing client applications.
* `scylladb-dev <https://groups.google.com/d/forum/scylladb-dev>`_: Discuss the development of ScyllaDB itself.


I deleted data from Scylla, but disk usage stays the same. Why?
^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^

Data you write to Scylla gets persisted to SSTables. Since SSTables are immutable, the data can't actually be removed
when you perform a delete, instead, a marker (also called a "tombstone") is written to indicate the value's new status.
Never fear though, on the first compaction that occurs between the data and the tombstone, the data will be expunged
completely and the corresponding disk space recovered. 

What are seeds?
^^^^^^^^^^^^^^^

Seeds are used during startup to discover the cluster. They are referred by new nodes on bootstrap to learn about other nodes in the ring. When you add a new node to the cluster, you
must specify one live seed to contact.

In ScyllaDB versions earlier than Scylla Open Source 4.3 and Scylla Enterprise 2021.1, a seed node has an additional 
function: it assists with gossip convergence. See :doc:`Scylla Seed Nodes </kb/seed-nodes/>` for details.

We recommend updating your ScyllaDB to version 4.3 or later (Open Source) or 2021.1 or later (Enterprise).

Does single seed mean single point of failure?
^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^

The ring can operate or boot without a seed; however, you will not be able to add new nodes to the cluster. It is recommended to configure multiple seeds in production systems.

.. _faq-raid0-required:

Is RAID0 required for Scylla? Why?
^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^

No, it is not required, but it is highly recommended when using Scylla with more than one drive. Scylla requires one drive for its data file and one drive for commit log (can be the same). If you want to take advantage of more than one drive, the easiest way to do so is set RAID0 (striped) across all of them. If you choose, scylla_setup will setup RAID0 for you on your selected drive, as well as XFS file system (recommended).
Similarly, Scylla AMI on EC2 will automatically mount all available SSD drives in RAID0.

Should I use RAID for replications, such as RAID1, RAID4 or higher?
^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^

You can, but it is not recommended. Scylla :doc:`clustering architecture </architecture/ringarchitecture/index/>` already provides data replication across nodes and DCs.
Adding another layer of replication in each node is redundant, slows down I/O operation and reduces available storage.
Want a higher level of replication?
Increase the Replication Factor (RF) of :doc:`relevant Keyspaces </cql/ddl/>`.

Can I use JBOD and not use RAID0?
^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^

:term:`JBOD` is not supported by Scylla.

:abbr:`JBOD (Just a Bunch Of Disks)` may be a reasonable solution for Cassandra because it rebuilds nodes very slowly. As this is not an issue for Scylla, it's more efficient to use RAID. 

Explanation: There are two types of deployment when multiple disks exist. In the JBOD case, each disk is an isolated filesystem. I/O isn't stripped and thus performance can be slower than that of RAID. In addition, as the free space isn't shared, a single disk can be full while the others are available.

The benefit of JBOD vs RAID is that it isolates failures to individual disk and not the entire node.
However, Scylla rebuilds nodes quickly and thus it is not an issue when rebuilding an entire node.

As a result, it is much more advantageous to use RAID with Scylla


Is ``Nodetool Repair`` a Local (One Node) Operation or a Global (Full Cluster) Operation?
^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^

When running :doc:`nodetool repair </operating-scylla/nodetool-commands/repair/>` on a node, it performs a repair on every token range this node owns; this will also repair other nodes that share the same range.

If you wish to repair the entire cluster, it is recommended to run ``nodetool repair -pr`` on each node in the cluster, sequentially, or use the `ScyllaDB Manager <https://manager.docs.scylladb.com/>`_.


How can I change the maximum number of IN restrictions?
^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^

You can restrict the number of items in the IN clause with the following options:

* ``--max-partition-key-restrictions-per-query`` - Specifies the maximum number of distinct partition keys restrictions per query. This limit places a bound 
  on the size of IN tuples, especially when multiple partition key columns have IN restrictions. The default is ``100``.
* ``--max-clustering-key-restrictions-per-query`` - Specifies the maximum number of distinct clustering keys restrictions per query. This limit 
  places a bound on the size of IN tuples, especially when multiple clustering key columns have IN restrictions. The default is ``100``.

.. warning::

   We recommend that you use these options with caution. Changing the maximum number of IN restrictions to more than 100 may result in server instability.

The options can be configured on the command line, passed with ``SCYLLA_ARGS`` in ``/etc/default/scylla-server`` or ``/etc/sysconfig/scylla-server``, 
or added to your ``scylla.yaml`` (see :doc:`Scylla Configuration<operating-scylla/admin>`).

Can I change the coredump mount point? 
^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^

Yes, by edit ``sysctl.d``.
 
Procedure

1. Create ``/etc/sysctl.d/99-scylla-coredump.conf`` (this file exists by default in Scylla AMI).

2. Open the ``99-scylla-coredump.conf`` file.

3. Add the following line ``kernel.core_pattern=|/<path>/<coredump_directory> %p %u %g %s %t %e"``

For example:

.. code-block:: shell

   kernel.core_pattern=|/home/centos/core/ %p %u %g %s %t %e"

4. Run ``sysctl -p /etc/sysctl.d/99-scylla-coredump.conf``