7e2875d648
The goal of merge is to reduce the tablet count for a shrinking table. Similar to how split increases the count while the table is growing. The load balancer decision to merge is implemented today (came with infrastructure introduced for split), but it wasn't handled until now. Initial tablet count is respected while the table is in "growing mode". For example, the table leaves it if there was a need to split above the initial tablet count. After the table leaves the mode, the average size can be trusted to determine that the table is shrinking. Merge decision is emitted if the average tablet size is 50% of the target. Hysteresis is applied to avoid oscillations between split and merges. Similar to split, the decision to merge is recorded in tablet map's resize_type field with the string "merge". This is important in case of coordinator failover, so new coordinator continues from where the old left off. Unlike split, the preparation phase during merge is not done by the replica (with split compactions), but rather by the coordinator by co-locating sibling tablets in the same node's shard. We can define sibling tablets as tablets that have contiguous range and will become one after merge. The concept is based on the power-of-two constraint and token contiguity. For example, in a table with 4 tablets, tablets of ids 0 and 1 are siblings, 2 and 3 are also siblings. The algorithm for co-locating sibling tablets is very simple. The balancer is responsible for it, and it will emit migrations so that "odd" tablet will follow the "even" one. For example, tablet 1 will be migrated to where tablet 0 lives. Co-location is low in priority, it's not the end of the world to delay merge, but it's not ideal to delay e.g. decommission or even regular load balancing as that can translate into temporary unbalancing, impacting the user activities. So co-location migrations will happen when there is no more important work to do. While regular balancing is higher in priority, it will not undo the co-location work done so far. It does that by treating co-located tablets as if they were already merged. The load inversion convergence check was adjusted so balancer understand when two tablets are being migrated instead of one, to avoid oscillations. When balancer completes co-location work for a table undergoing merge, it will put the id of the table into the resize_plan, which is about communicating with the topology coordinator that a table is ready for it. With all sibling tablets co-located, the coordinator can resize the tablet map (reduce it by a factor of 2) and record the new map into group0. All the replicas will react to it (on token metadata update) by merging the storage (memtable(s) + sstables) of sibling tablets into one. Fixes #18181. system test details: test: https://github.com/pehala/scylla-cluster-tests/blob/tablets_split_merge/tablets_split_merge_test.py yaml file: https://github.com/pehala/scylla-cluster-tests/blob/tablets_split_merge/test-cases/features/tablets/tablets-split-merge-test.yaml instance type: i3.8xlarge nodes: 3 target tablet size: 0.5G (scaled down by 10, to make it easier to trigger splits and merges) description: multiple cycles of growing and shrinking the data set in order to trigger splits and merges. data_set_size: ~100G initial_tablets: 64, so it grew to 128 tablets on split, and back to 64 on merge. latency of reads and writes that happened in parallel to split and merge: ``` $ for i in scylla-bench*; do cat $i | grep "Mode\|99th:\|99\.9th:"; done Mode: write 99.9th: 3.145727ms 99th: 1.998847ms 99.9th: 3.145727ms 99th: 2.031615ms Mode: read 99.9th: 3.145727ms 99th: 2.031615ms 99.9th: 3.145727ms 99th: 2.031615ms Mode: write 99.9th: 3.047423ms 99th: 1.933311ms 99.9th: 3.047423ms 99th: 1.933311ms Mode: read 99.9th: 3.145727ms 99th: 1.900543ms 99.9th: 3.145727ms 99th: 1.900543ms Mode: write 99.9th: 5.079039ms 99th: 3.604479ms 99.9th: 35.389439ms 99th: 25.624575ms Mode: write 99.9th: 3.047423ms 99th: 1.998847ms 99.9th: 3.047423ms 99th: 1.998847ms Mode: read 99.9th: 3.080191ms 99th: 2.031615ms 99.9th: 3.112959ms 99th: 2.031615ms ``` Closes scylladb/scylladb#20572 * github.com:scylladb/scylladb: docs: Document tablet merging tests/boost: Add test to verify correctness of balancer decisions during merge tests/topology_experimental_raft: Add tablet merge test service: Handle exception when retrying split service: Co-locate sibling tablets for a table undergoing merge gms: Add cluster feature for tablet merge service: Make merge of resize plan commutative replica: Implement merging of compaction groups on merge completion replica: Handle tablet merge completion service: Implement tablet map resize for merge locator: Introduce merge_tablet_info() service: Rename topology::transition_state::tablet_split_finalization service: Respect initial_tablet_count if table is in growing mode service: Wire migration_tablet_set into the load balancer locator: Add tablet_map::sibling_tablets() service: Introduce sorted_replicas_for_tablet_load() locator/tablets: Extend tablet_replica equality comparator to three-way service: Introduce alias to per-table candidate map type service: Add replication constraint check variant for migration_tablet_set service: Add convergence check variant for migration_tablet_set service: Add migration helpers for migration_tablet_set service/tablet_allocator: Introduce migration_tablet_set service: Introduce migration_plan::add(migrations_vector) locator/tablets: Introduce tablet_map::for_each_sibling_tablets() locator/tablets: Introduce tablet_map::needs_merge() locator/tablets: Introduce resize_decision::initial_decision() locator/tablets: Fix return type of three-way comparison operators service: Extract update of node load on migrations service: Extract converge check for intra-node migration service: Extract erase of tablet replicas from candidate list scripts/tablet-mon: Allow visualization of tablet id
ScyllaDB Documentation
This repository contains the source files for ScyllaDB Open Source documentation.
- The
devfolder contains developer-oriented documentation related to the ScyllaDB code base. It is not published and is only available via GitHub. - All other folders and files contain user-oriented documentation related to ScyllaDB Open Source and are sources for opensource.docs.scylladb.com.
To report a documentation bug or suggest an improvement, open an issue in GitHub issues for this project.
To contribute to the documentation, open a GitHub pull request.
Key Guidelines for Contributors
- The user documentation is written in reStructuredText (RST) - a plaintext markup language similar to Markdown. If you're not familiar with RST, see ScyllaDB RST Examples.
- The developer documentation is written in Markdown. See Basic Markdown Syntax for reference.
- Follow the ScyllaDB Style Guide.
To prevent the build from failing:
-
If you add a new file, ensure it's added to an appropriate toctree, for example:
.. toctree:: :maxdepth: 2 :hidden: Page X </folder1/article1> Page Y </folder1/article2> Your New Page </folder1/your-new-article> -
Make sure the link syntax is correct. See the guidelines on creating links
-
Make sure the section headings are correct. See the guidelines on creating headings Note that the markup must be at least as long as the text in the heading. For example:
---------------------- Prerequisites ----------------------
Building User Documentation
Prerequisites
- Python
- poetry
- make
See the ScyllaDB Sphinx Theme prerequisites to check which versions of the above are currently required.
Mac OS X
You must have a working Homebrew in order to install the needed tools.
You also need the standard utility make.
Check if you have these two items with the following commands:
brew help
make -h
Linux Distributions
Building the user docs should work out of the box on most Linux distributions.
Windows
Use "Bash on Ubuntu on Windows" for the same tools and capabilities as on Linux distributions.
Building the Docs
- Run
make previewto build the documentation. - Preview the built documentation locally at http://127.0.0.1:5500/.
Cleanup
You can clean up all the build products and auto-installed Python stuff with:
make pristine
Information for Contributors
If you are interested in contributing to Scylla docs, please read the Scylla open source page at http://www.scylladb.com/opensource/ and complete a Scylla contributor agreement if needed. We can only accept documentation pull requests if we have a contributor agreement on file for you.
Third-party Documentation
-
Do any copying as a separate commit. Always commit an unmodified version first and then do any editing in a separate commit.
-
We already have a copy of the Apache license in our tree, so you do not need to commit a copy of the license.
-
Include the copyright header from the source file in the edited version. If you are copying an Apache Cassandra document with no copyright header, use:
This document includes material from Apache Cassandra.
Apache Cassandra is Copyright 2009-2014 The Apache Software Foundation.