mirror of
https://github.com/seaweedfs/seaweedfs.git
synced 2026-08-19 05:36:58 +00:00
bumpy-hope
7
Commits
| Author | SHA1 | Message | Date | |
|---|---|---|---|---|
  Chris LuandGitHub
|
cd15ae1395 |
fix(ec): bring ec.encode worker and EC/volume helpers to parity with shell (#9599)
* refactor(volume): extract replica sync/select into shared volume_replica package Move the volume replica reconciliation helpers (status, union builder, SyncAndSelectBestReplica, ReadNeedleMeta) out of the shell into a new weed/storage/volume_replica package so both the shell (ec.encode, volume.tier.move, volume.check.disk) and the EC encode worker can reuse them. No behavior change. * fix(ec): bring ec.encode worker to parity with the shell - Sync replicas and encode the most-complete one (via the shared volume_replica.SyncAndSelectBestReplica) instead of a possibly-stale replica, marking all replicas readonly first. Prevents silent data loss when a stale replica is encoded and the originals deleted. - Skip remote/tiered volumes in detection (shell ec.encode excludes them). - Min-node safety gate: refuse to encode when cluster nodes < parity shards. - Align default thresholds with the shell (fullness 0.95, quiet 1h). * fix(vacuum): plugin path honors min_volume_age_seconds override deriveVacuumConfig hard-coded MinVolumeAgeSeconds=0, dropping any configured value. Read it from worker config (default 0, matching the shell/master vacuum which has no age gate) so an explicit override is honored. * address review feedback - config.go: align GetConfigSpec schema defaults (quiet_for_seconds=3600, fullness_ratio=0.95) with the runtime defaults so UI/bootstrap flows match the shell (coderabbitai). - ec_task.go: roll back readonly when markReplicasReadonly fails partway, so already-marked replicas don't stay readonly (coderabbitai). - volume_replica: pass the caller's replica statuses into buildUnionReplica instead of re-fetching them, and skip the per-needle ReadNeedleMeta RPC when the source replica is read-only (gemini-code-assist). * test(plugin_workers/ec): make fixtures eligible under the new defaults The default EC encode thresholds were raised to match the shell (fullness 0.95, quiet 1h), but the plugin-worker integration fixtures still used 90%-full / 10-minute-old volumes, so detection found no eligible volumes and the tests failed in CI. Bump the eligible fixtures to 96% full and 2h old. |
||
|
Chris LuandGitHub
|
024b59fb31 |
fix(ec): pack EC shards onto fewer disks instead of refusing the task (#9588)
The planner refused to create an EC task unless it found totalShards distinct (server, disk_id) targets, so a cluster with fewer disks than shards (e.g. 8 single-disk servers for a 10+4 scheme) could never encode. A disk safely holds several distinct shards of one volume: each is its own .ecNN file and ReceiveFile keys by that extension. Drop the strict check and let createECTargets round-robin shards across the available disks, matching ec.encode's "4,4,3,3" fallback. The minTotalDisks floor (ceil(total/parity)) already keeps any disk under parityShards shards, so the volume still survives losing any one disk. Reserve capacity for the actual per-disk shard count rather than assuming one shard each, so packing doesn't over-commit disk slots. |
||
|
Chris LuandGitHub
|
d221a64262 |
fix(ec): skip re-encode when EC shards already exist for the volume (#9448) (#9458)
* fix(ec): skip re-encode when EC shards already exist for the volume (#9448) When an earlier EC encoding succeeded but the post-encode source-delete left a regular replica behind on one of the servers, the next detection cycle proposes the same volume again. The new encode tries to redistribute shards to targets that already have them mounted, the volume server returns `ec volume %d is mounted; refusing overwrite`, the task fails, and detection re-queues the volume. The cycle repeats forever — issue #9448. The existing `metric.IsECVolume` skip catches the case where the canonical metric is reported on the EC-shard side of the heartbeat, but when the master sees BOTH a regular replica AND its EC shards in the same volume list, the canonical metric we pick is the regular replica and IsECVolume is false. Add a second guard that checks the topology directly via `findExistingECShards` (already present and indexed) and skip the volume when any shards exist, logging a warning that points the admin at the stuck source. This breaks the loop. Auto-cleanup of the orphaned replica is left as follow-up work — deleting a source replica from inside the detector is only safe with a re-verification step right before the delete, plus a config opt-in, and is best done in its own change. * fix(ec): #9448 guard only fires when EC shard set is complete The first version of the #9448 guard tripped on `len(existingShards) > 0`, which is broader than necessary. The existing recovery branch in the encode arm (around the `existingECShards` block, ~line 216) is designed to fold partial leftover shards from a previously failed encode into the new task as cleanup sources. Skipping unconditionally on any existing shards made that branch dead code, regressing the recovery behavior Gemini flagged in the review of |
||
|
Chris LuandGitHub
|
532b088262 |
fix(ec): preserve source disk type across EC encoding (#9423) (#9449)
* fix(ec): carry source disk type on VolumeEcShardsMount (#9423) When EC shards land on a target whose disk type differs from the source volume's, master heartbeats wrongly reported under the target disk's type. Add source_disk_type to VolumeEcShardsMountRequest; the target server applies it to the in-memory EcVolume via SetDiskType so the mount notification and steady-state heartbeat both carry the source's disk type. Empty value falls back to the location's disk type (used by disk-scan reload paths). The override is not persisted with the volume — disk type stays an environmental property and .vif remains portable. * fix(ec): plumb source disk type through plugin worker (#9423) Add source_disk_type to ErasureCodingTaskParams (field 8; 7 reserved), populate it from the metric the detector already collects, thread it through ec_task into the MountEcShards helper, and forward it on the VolumeEcShardsMount RPC. * fix(ec): mirror source disk type plumbing in rust volume server (#9423) The volume_ec_shards_mount handler now forwards source_disk_type into mount_ec_shard → DiskLocation::mount_ec_shards. When non-empty it overrides ec_vol.disk_type (and each mounted shard's disk_type) via the new set_disk_type method; empty value keeps the location's disk type, so disk-scan reload and reconcile paths are unchanged. Also picks up two pre-existing proto drifts that 'make gen' synced from weed/pb (LockRingUpdate in master.proto, listing_cache_ttl_seconds in remote.proto). * feat(ec): bias placement toward preferred disk type (#9423) Add DiskCandidate.DiskType and PlacementRequest.PreferredDiskType. When PreferredDiskType is non-empty, SelectDestinations partitions suitable disks into matching/fallback tiers and runs the rack/server/ disk-diversity passes on the matching tier first; the fallback tier is only consulted if the matching pool can't satisfy ShardsNeeded. PlacementResult.SpilledToOtherDiskType lets callers warn on spillover. Empty PreferredDiskType keeps the existing single-pool behavior. * fix(ec): plumb source disk type into placement planner (#9423) diskInfosToCandidates now copies DiskInfo.DiskType into the placement candidate, and ecPlacementPlanner.selectDestinations forwards metric.DiskType as PreferredDiskType so EC shards land on disks matching the source volume's disk type when possible. A glog warning fires when placement had to spill to other disk types. * test(ec): integration coverage for source-disk-type plumbing (#9423) store_ec_disk_type_test exercises Store.MountEcShards end-to-end: a shard physically lives on an HDD location, MountEcShards is called with sourceDiskType="ssd", and the test asserts that the in-memory EcVolume, the mounted shard, the NewEcShardsChan notification, and the steady-state heartbeat all report under the source's disk type. A companion test pins the empty-source path so disk-scan reload keeps the location's disk type. detection_disk_type_test exercises the worker plumbing: with a cluster of nodes carrying both HDD and SSD disks, planECDestinations must place every shard on SSD when metric.DiskType="ssd"; with only one SSD node and 13 HDD nodes it must still satisfy a 10+4 layout via spillover (and log a warning). * revert(ec): drop unrelated proto drift in seaweed-volume/proto (#9423) make gen pulled two pre-existing OSS changes into the rust proto tree (LockRingUpdate / by_plugin in master.proto, listing_cache_ttl_seconds in remote.proto). Reviewers flagged it as scope creep — none of the rust EC fix references those fields. Restore both files to origin/master so this branch only touches EC-related symbols. * fix(ec placement): treat empty disk type as hdd and skip used racks on spill (#9423) partitionByDiskType used raw string comparison, so a PreferredDiskType of "hdd" never matched candidates whose DiskType is "" (the HardDriveType sentinel that weed/storage/types uses). EC encoding of an HDD source would spill onto any HDD reporting "" even when the cluster has plenty of matching capacity. Normalize both sides through normalizeDiskType, which lowercases and folds "" → "hdd", mirroring types.ToDiskType without taking a dependency on it. selectFromTier's rack-diversity pass also kept revisiting racks the preferred tier had already used when running on the fallback tier, which negated PreferDifferentRacks on spillover. Skip racks already in usedRacks so fallback placements still spread onto new racks. * fix(ec): empty-source remount must not clobber existing disk type (#9423) mount_ec_shards_with_idx_dir runs more than once per vid (RPC mount, disk-scan reload, orphan-shard reconcile). After an RPC sets the source-derived disk type, any later call passing source_disk_type="" was resetting ec_vol.disk_type back to the location's value, which reintroduces the heartbeat drift this PR is meant to fix. Only default to the location's disk type when the EC volume is fresh (no shards mounted yet); otherwise leave the recorded type alone so empty-source reloads preserve whatever the original mount RPC set. |
||
|
Chris LuandGitHub
|
fd463155e4 |
fix(ec): planner treats each (server, disk_id) as a distinct target (#9369) (#9371)
* fix(ec): planner treats each (server, disk_id) as a distinct target (#9369) master_pb.DataNodeInfo.DiskInfos is keyed by disk type, so a volume server with multiple physical disks of the same type collapses into a single DiskInfo. Per-disk attribution survives only inside the VolumeInfos[].DiskId / EcShardInfos[].DiskId records, and the active topology never put it back together. The EC planner saw N candidates instead of N×disks, returned a short plan, and createECTargets round-robined extra shards onto the same (server, disk_id) — colliding with the #9185 disk_id-aware ReceiveFile. Reconstruct per-physical-disk view in UpdateTopology by splitting each DiskInfo into one entry per observed disk_id, and index volumes / EC shards by their own DiskId so lookups stay aligned. Refuse to plan an EC task when fewer than totalShards distinct disks are available rather than packing shards onto the same disk. Threads dataShards/parityShards through planECDestinations, createECTargets and createECTaskParams so the helpers don't depend on the OSS 10+4 constants — keeps enterprise merges clean. * trim verbose comments * align EC param signatures with enterprise - dataShards/parityShards: uint32 → int (matches enterprise's ratio API) - drop unused multiPlan from createECTaskParams - minTotalDisks: total/parity+1 → ceil(total/parity), correct for non-default ratios Reduces merge surface when this PR lands in seaweed-enterprise. |
||
 
|
f5c35240be |
Add volume dir tags and EC placement priority (#8472)
* Add volume dir tags to topology Co-authored-by: Copilot <223556219+Copilot@users.noreply.github.com> * Add preferred tag config for EC Co-authored-by: Copilot <223556219+Copilot@users.noreply.github.com> * Prioritize EC destinations by tags Co-authored-by: Copilot <223556219+Copilot@users.noreply.github.com> * Add EC placement planner tag tests Co-authored-by: Copilot <223556219+Copilot@users.noreply.github.com> * Refactor EC placement tests to reuse buildActiveTopology Remove buildActiveTopologyWithDiskTags helper function and consolidate tag setup inline in test cases. Tests now use UpdateTopology to apply tags after topology creation, reusing the existing buildActiveTopology function rather than duplicating its logic. All tag scenario tests pass: - TestECPlacementPlannerPrefersTaggedDisks - TestECPlacementPlannerFallsBackWhenTagsInsufficient Co-authored-by: Copilot <223556219+Copilot@users.noreply.github.com> * Consolidate normalizeTagList into shared util package Extract normalizeTagList from three locations (volume.go, detection.go, erasure_coding_handler.go) into new weed/util/tag.go as exported NormalizeTagList function. Replace all duplicate implementations with imports and calls to util.NormalizeTagList. This improves code reuse and maintainability by centralizing tag normalization logic. Co-authored-by: Copilot <223556219+Copilot@users.noreply.github.com> * Add PreferredTags to EC config persistence Add preferred_tags field to ErasureCodingTaskConfig protobuf with field number 5. Update GetConfigSpec to include preferred_tags field in the UI configuration schema. Add PreferredTags to ToTaskPolicy to serialize config to protobuf. Add PreferredTags to FromTaskPolicy to deserialize from protobuf with defensive copy to prevent external mutation. This allows EC preferred tags to be persisted and restored across worker restarts. Co-authored-by: Copilot <223556219+Copilot@users.noreply.github.com> * Add defensive copy for Tags slice in DiskLocation Copy the incoming tags slice in NewDiskLocation instead of storing by reference. This prevents external callers from mutating the DiskLocation.Tags slice after construction, improving encapsulation and preventing unexpected changes to disk metadata. Co-authored-by: Copilot <223556219+Copilot@users.noreply.github.com> * Add doc comment to buildCandidateSets method Document the tiered candidate selection and fallback behavior. Explain that for a planner with preferredTags, it accumulates disks matching each tag in order into progressively larger tiers, emits a candidate set once a tier reaches shardsNeeded, and finally falls back to the full candidates set if preferred-tag tiers are insufficient. This clarifies the intended semantics for future maintainers. Co-authored-by: Copilot <223556219+Copilot@users.noreply.github.com> * Apply final PR review fixes 1. Update parseVolumeTags to replicate single tag entry to all folders instead of leaving some folders with nil tags. This prevents nil pointer dereferences when processing folders without explicit tags. 2. Add defensive copy in ToTaskPolicy for PreferredTags slice to match the pattern used in FromTaskPolicy, preventing external mutation of the returned TaskPolicy. 3. Add clarifying comment in buildCandidateSets explaining that the shardsNeeded <= 0 branch is a defensive check for direct callers, since selectDestinations guarantees shardsNeeded > 0. Co-authored-by: Copilot <223556219+Copilot@users.noreply.github.com> * Fix nil pointer dereference in parseVolumeTags Ensure all folder tags are initialized to either normalized tags or empty slices, not nil. When multiple tag entries are provided and there are more folders than entries, remaining folders now get empty slices instead of nil, preventing nil pointer dereference in downstream code. Co-authored-by: Copilot <223556219+Copilot@users.noreply.github.com> * Fix NormalizeTagList to return empty slice instead of nil Change NormalizeTagList to always return a non-nil slice. When all tags are empty or whitespace after normalization, return an empty slice instead of nil. This prevents nil pointer dereferences in downstream code that expects a valid (possibly empty) slice. Co-authored-by: Copilot <223556219+Copilot@users.noreply.github.com> * Add nil safety check for v.tags pointer Add a safety check to handle the case where v.tags might be nil, preventing a nil pointer dereference. If v.tags is nil, use an empty string instead. This is defensive programming to prevent panics in edge cases. Co-authored-by: Copilot <223556219+Copilot@users.noreply.github.com> * Add volume.tags flag to weed server and weed mini commands Add the volume.tags CLI option to both the 'weed server' and 'weed mini' commands. This allows users to specify disk tags when running the combined server modes, just like they can with 'weed volume'. The flag uses the same format and description as the volume command: comma-separated tag groups per data dir with ':' separators (e.g. fast:ssd,archive). Co-authored-by: Copilot <223556219+Copilot@users.noreply.github.com> --------- Co-authored-by: Copilot <copilot@github.com> Co-authored-by: Copilot <223556219+Copilot@users.noreply.github.com> |
||
|
Chris LuandGitHub
|
d2b92938ee |
Make EC detection context aware (#8449)
* Make EC detection context aware * Update register.go * Speed up EC detection planning * Add tests for EC detection planner * optimizations detection.go: extracted ParseCollectionFilter (exported) and feed it into the detection loop so both detection and tracing share the same parsing/whitelisting logic; the detection loop now iterates on a sorted list of volume IDs, checks the context at every iteration, and only sets hasMore when there are still unprocessed groups after hitting maxResults, keeping runtime bounded while still scheduling planned tasks before returning the results. erasure_coding_handler.go: dropped the duplicated inline filter parsing in emitErasureCodingDetectionDecisionTrace and now reuse erasurecodingtask.ParseCollectionFilter, and the summary suffix logic now only accounts for the hasMore case that can actually happen. detection_test.go: updated the helper topology builder to use master_pb.VolumeInformationMessage (matching the current protobuf types) and tightened the cancellation/max-results tests so they reliably exercise the detection logic (cancel before calling Detection, and provide enough disks so one result is produced before the limit). * use working directory * fix compilation * fix compilation * rename * go vet * fix getenv * address comments, fix error |