mirror of
https://github.com/seaweedfs/seaweedfs.git
synced 2026-08-16 04:06:44 +00:00
filer-conditional-create
16
Commits
| Author | SHA1 | Message | Date | |
|---|---|---|---|---|
  Chris LuandGitHub
|
0566fbd552 |
EC encode: place shards via ecbalancer.Place + configurable replica placement (#9623)
* Add shared super_block.ResolveReplicaPlacement; use it in ec_balance
* Add ecbalancer.FromActiveTopology snapshot constructor for EC encode/repair
* Add ecbalancer.Place greenfield/repair placement core (strict + durability-first)
* topology: add GetEffectiveAvailableEcShardSlots; FromActiveTopology uses shard-granular free slots
GetDisksWithEffectiveCapacity flattens reserved shard slots into volume slots via
integer truncation, so an in-flight EC task reserving a non-multiple-of-
DataShardsCount number of shards was lost from the snapshot and freeSlots was
over-reported. GetEffectiveAvailableEcShardSlots subtracts the full reservation
impact at shard granularity.
* ecbalancer.Place: reject nodes without a free disk of the requested type
FromActiveTopology keeps all disk types in the snapshot, so an SSD-only request
could be routed to a node with only HDD capacity (pickBestDiskOnNode then returns
disk 0 on the wrong tier). Filter rack/node selection to those with a free disk
of the requested type.
* ecbalancer.Place: enforce ReplicaPlacement DiffDataCenterCount (per-DC shard cap)
* ecbalancer: enforce DiffDataCenterCount in balance (cross-DC phase + cross-rack DC cap)
Adds a cross-DC corrective phase that drains data centers holding more than
DiffDataCenterCount shards of a volume, and a per-DC cap on cross-rack move
targets. Both are no-ops when DiffDataCenterCount is unset, so balance output is
unchanged for non-DC placements.
* topology: ratio-aware EC shard slots and provisional empty-disk slot
GetEffectiveAvailableEcShardSlots now takes the target collection's data-shard
count, so a 4+2 volume's larger shards are not over-counted at 10 per volume slot;
and it keeps the one provisional slot for freshly started empty servers that
report max=0, matching getEffectiveAvailableCapacityUnsafe. FromActiveTopology
threads the ratio through.
* ecbalancer.Place: explicit disk-type filter signal (fix HDD vs any ambiguity)
HardDriveType normalizes to "", which collided with "" meaning any disk. Add
Constraints.FilterDiskType and normalize both sides so a hdd request matches disks
reported as "" and never leaks to SSD, while filter=false still means any.
* ecbalancer: add clearShardAccounting for repair snapshot reconciliation
Clears one disk's copy of a shard from per-domain accounting and recomputes the
node-level union (preserving a kept copy on another disk of the same node), without
crediting capacity. Repair uses it to drop to-be-deleted copies before placing
missing shards.
* ecbalancer: don't cap cross-DC target racks when DiffRackCount is unset
len(racks)+1 wrongly limited each target rack (3 in a 2-rack cluster), so draining
a DC could stop short of the DiffDataCenterCount cap. Use MaxShardCount+1 as the
effectively-unlimited default.
* topology/ecbalancer: ratio-correct EC capacity accounting
Reservation shard slots (default ShardsPerVolumeSlot units) are now converted to
the target ratio before subtracting, and existing EC shards are charged by size
(targetDataShards/shardDataShards) so a 2+1 shard isn't counted as one 10+4 slot.
Per-shard ratio lookup is behind shardDataShards (OSS uses the standard ratio).
* ecbalancer.Place: candidate tiering and eligible-rack caps
Adds a per-disk eligibility/preference abstraction so Place supports:
- preferred-tag whole-plan retry (try disks carrying the earliest tags first,
widen to all only if a tier cannot place every shard; reports
SpilledOutsidePreferredTags),
- soft disk-type spill via DiskTypePolicy (Any/Prefer/Require): Prefer fills the
preferred type then spills, reporting SpilledToOtherDiskType; Require filters,
- even per-rack caps that divide by racks holding an eligible disk, so a tiered
cluster (e.g. SSDs in 2 of 4 racks) isn't capped impossibly low.
Disk tags carried via Node.AddDiskTags + FromActiveTopology.
* ecbalancer: export ClearShardAccounting for repair snapshot reconciliation
* ecbalancer: address review feedback (ratio rounding, bitmap walk, same-DC moves)
- topology/ecbalancer: round shard-reservation and existing-shard footprint up
when converting to target-ratio shard slots, so a sub-slot reservation is not
truncated to zero and free capacity is not overstated for low-data-shard
layouts (targetDataShards < ds).
- erasure_coding: add ShardBits.All iterator and use it across the balancer,
cross-DC phase, and placement scoring instead of scanning 0..MaxShardCount and
probing Has on every id.
- ecbalancer: allow same-DC cross-rack moves when a DC already sits at its
DiffDataCenterCount cap; a same-DC move leaves the DC total unchanged. Add a
regression test that fails without the guard.
- ecbalancer cross-DC phase: pick targets via the eligible-aware
pickNodeInRackEligible/pickBestDiskEligible helpers so the disk-type filter is
honored and a 0 disk id is not mistaken for a valid selection.
* ecbalancer: test ecShardSlotsOnDisk fractional round-up
Cover the mixed-ratio path (targetDataShards < existing data shards) so a
shard's fractional footprint is never floored to zero and free capacity is not
overstated. Exercises the round-up via the targetDataShards parameter; OSS uses
the standard ratio at runtime while the enterprise build hits it with real
per-volume ratios.
* ecbalancer: assert node B rack in TestFromActiveTopology
* ecbalancer: split Destination into separate DataCenter and bare Rack
Replace the composite "dc:rack" Rack field on Destination with separate
DataCenter and bare Rack values, matching topology.DiskInfo and the worker-task
convention. Callers (and tests) read the data center directly instead of parsing
the composite with strings.SplitN.
* shell ec.balance: use utilization-based global balancing (parity with worker)
The shell's global rebalance phase balanced by raw shard count; switch it to
fractional fullness (shards/capacity), as the worker already does. On uniform
capacity the two agree; on heterogeneous capacity it fills nodes proportionally
instead of driving small-capacity nodes toward full.
Updates the heterogeneous-capacity regression test to assert even fullness
(~equal shards/capacity per node) rather than even shard count.
* ecbalancer: bounded-proportional per-DC shard spread
DiffDataCenterCount was enforced only as a ceiling (drain-to-cap), which could
leave a within-cap-but-lopsided DC distribution under a loose cap (e.g. 10/4 of 14
with cap=10). Now the cross-DC phase, the cross-rack DC guard, and Place all target
boundedMaxPerDC = min(DiffDataCenterCount, max(ceil(total/numDCs), parityShards)):
shards spread proportionally across DCs, but no tighter than the durability floor
(once each DC holds <= parityShards a DC loss is recoverable, so further spreading
only adds cross-DC/WAN traffic). No-op when DiffDataCenterCount is 0; identical to
before when the cap is the binding constraint.
* ecbalancer: drop DiffDataCenterCount enforcement for EC placement
The 1-byte volume ReplicaPlacement packs xyz into x*100+y*10+z<=255, so the DC
digit can only be 0-2 -- far too small to be a meaningful per-DC EC shard cap (a
cap of 1-2 would demand 7-14 DCs for a 10+4 volume). It's volume replica-placement,
not an EC spec. Removes the cross-DC balance phase, the DC guard in the cross-rack
phase, and the per-DC cap in Place (and the just-added bounded-proportional logic);
EC relies on the RP-independent rack/node even spread instead. Rack/node caps
(DiffRackCount/SameRackCount) are unchanged. Per-domain EC caps are left for a real
EC placement spec.
* ecbalancer: enforce per-disk durability cap; symmetric reserve/release
Place now refuses to put more than parityShards shards of a volume on a single
disk (pickBestDiskEligible skips a disk once it holds parityShards of the volume,
a hard cap not relaxed even in durability-first). Previously Place assigned by
free capacity, so a skewed near-full cluster could pile >parityShards onto one
disk -> losing it loses the volume; only distinct-disk count was checked. This
covers encode and repair (both route through Place); the caller skips/leaves the
volume rather than minting an unrecoverable layout.
Also makes reserveShard decrement freeSlots unconditionally, symmetric with
releaseShard's unconditional increment (the old guarded decrement could credit a
phantom slot on release if a shard were ever reserved onto a full disk).
* ecbalancer: add Topology.ReleaseVolumeShards (clear + credit) for greenfield encode
Releases all of a volume's shards from the snapshot and credits the freed disk
capacity, so a greenfield encode can plan as if stale EC shards from a prior failed
attempt are gone. Safe to credit because the encode task deletes stale shards
(cleanupStaleEcShards) before distributing the new ones. Distinct from
ClearShardAccounting (repair), which does not credit.
* ecbalancer: ReleaseVolumeShards credits node freeSlots, not just disks
releaseShard only increments per-disk freeSlots, but rack capacity is summed from
node freeSlots (buildRacks) and node freeSlots gates node eligibility. Crediting
only disks left a node/rack looking full after releasing stale shards, so a
greenfield encode still couldn't use the freed capacity. Now credits the node by
the total disk-slots freed.
* ecbalancer: correct PlacementMode docs (encode uses durability-first)
PlaceStrict was labeled '(encode)' but encode uses PlaceDurabilityFirst. Clarify
that durability-first is used by both encode and repair, reports relaxations in
PlaceResult.Relaxed, and never relaxes the per-disk durability cap.
* ecbalancer: treat SameRackCount as a direct per-node shard cap
The 3rd ReplicaPlacement digit now caps shards per node at exactly the digit
value, matching how DiffRackCount (2nd digit) caps per rack, instead of allowing
digit+1 per node. This makes the per-rack and per-node caps consistent and
matches the documented "digits cap EC shards per rack and per node" semantics;
e.g. 011 now means at most one shard per rack and one per node.
* EC encode: place shards via ecbalancer.Place + configurable replica placement
Encode now plans destinations through the shared ecbalancer.Place policy
(durability-first: prefers the source disk type and honors replica placement /
caps / anti-affinity, relaxing rather than failing when capacity is tight) instead
of the EC-only placement planner. Targets and capacity reservations use Place's
actual per-disk shard assignment, not a round-robin guess; cross-volume in-cycle
capacity is tracked by ActiveTopology's pending task, so the cached planner is no
longer consulted. Adds a configurable replica_placement (proto field 6 + worker
form + reader) that overrides the master default replication.
The placement-package planner code is left in place (now unused) and removed in a
follow-up that drops the package.
* EC encode: drop unused dataShards param from createECTargets
Addresses review feedback: after switching to Place's per-disk shardsPerPlan
assignment, createECTargets no longer needs the data-shard count.
* EC encode: fix packed-target validation, greenfield stale-shard accounting, RP docs
- Validate counts distinct shard ids across targets, not target rows, so packed
plans (fewer (node,disk) targets than shards) aren't rejected.
- planECDestinations releases the volume's stale EC shards from the snapshot before
Place (ReleaseVolumeShards), crediting their capacity. The encode task deletes
stale shards before distributing, so a retry on tight capacity no longer fails
planning by counting shards that are about to be removed.
- replica_placement config/form help no longer claims a data-center limit (the DC
digit is ignored for EC); detection logs a warning when a DC digit is set.
* EC encode: surface relaxed placement; mark replica_placement best-effort
Encode places with PlaceDurabilityFirst (the chosen lenient behavior), which can
relax caps/anti-affinity/replica-placement to avoid deferring. That was silent
(only disk-type/tag spills were logged). Now logs PlaceResult.Relaxed so a tight
replica placement isn't weakened unnoticed, and the config/form help states the
rack/node caps are best-effort during encode (enforced by rebalancing).
* EC encode: key per-disk shard grouping by struct, not formatted string
planECDestinations grouped destinations using a fmt.Sprintf("%s:%d") map key
per shard; use a {node,diskID} struct key and pre-size the map/slice to the
shard count to drop the per-shard string allocation.
|
||
|
Chris LuandGitHub
|
cd15ae1395 |
fix(ec): bring ec.encode worker and EC/volume helpers to parity with shell (#9599)
* refactor(volume): extract replica sync/select into shared volume_replica package Move the volume replica reconciliation helpers (status, union builder, SyncAndSelectBestReplica, ReadNeedleMeta) out of the shell into a new weed/storage/volume_replica package so both the shell (ec.encode, volume.tier.move, volume.check.disk) and the EC encode worker can reuse them. No behavior change. * fix(ec): bring ec.encode worker to parity with the shell - Sync replicas and encode the most-complete one (via the shared volume_replica.SyncAndSelectBestReplica) instead of a possibly-stale replica, marking all replicas readonly first. Prevents silent data loss when a stale replica is encoded and the originals deleted. - Skip remote/tiered volumes in detection (shell ec.encode excludes them). - Min-node safety gate: refuse to encode when cluster nodes < parity shards. - Align default thresholds with the shell (fullness 0.95, quiet 1h). * fix(vacuum): plugin path honors min_volume_age_seconds override deriveVacuumConfig hard-coded MinVolumeAgeSeconds=0, dropping any configured value. Read it from worker config (default 0, matching the shell/master vacuum which has no age gate) so an explicit override is honored. * address review feedback - config.go: align GetConfigSpec schema defaults (quiet_for_seconds=3600, fullness_ratio=0.95) with the runtime defaults so UI/bootstrap flows match the shell (coderabbitai). - ec_task.go: roll back readonly when markReplicasReadonly fails partway, so already-marked replicas don't stay readonly (coderabbitai). - volume_replica: pass the caller's replica statuses into buildUnionReplica instead of re-fetching them, and skip the per-needle ReadNeedleMeta RPC when the source replica is read-only (gemini-code-assist). * test(plugin_workers/ec): make fixtures eligible under the new defaults The default EC encode thresholds were raised to match the shell (fullness 0.95, quiet 1h), but the plugin-worker integration fixtures still used 90%-full / 10-minute-old volumes, so detection found no eligible volumes and the tests failed in CI. Bump the eligible fixtures to 96% full and 2h old. |
||
|
Chris LuandGitHub
|
2a41e76101 |
fix(ec): blanket-clean every destination over the full shard range (#9512)
* fix(ec): blanket-clean every destination over the full shard range The previous cleanup pass walked t.sources only, with the shard ids the topology had reported at detection time. In the wild, a destination can end up with EC shards mounted that the topology snapshot didn't list — shards on a sibling disk that hadn't heartbeated, or shards left over from a concurrent attempt's mount step. FindEcVolume still returns true, so the next ReceiveFile trips the mounted-volume guard. Cleanup now unions t.sources (with ShardIds) and t.targets and issues unmount + delete over [0..totalShards-1] on each. Both RPCs are idempotent on missing shards, so the wider sweep is free. Two new tests cover the gap: shards mounted beyond what t.sources lists, and a target-only destination with no source row. * log(ec): include disk_id in EC unmount/delete/refusal log lines The current logs identify the volume and shard but leave disk_id off, which makes the cross-server cleanup story hard to follow when multiple disks of one server hold pieces of the same volume: UnmountEcShards 4121.1 -> add disk_id ec volume video-recordings_4121 shard delete [1 5] -> add per-loc disk_id volume server X:Y deletes ec shards from 4121 [...] -> add disk_id ReceiveFile: ec volume 4121 is mounted; refusing... -> add disk_ids ReceiveFile's refusal now names the disk_ids actually holding the mount so operators can see whether the next cleanup pass needs to target a sibling disk. Added Store.FindEcVolumeDiskIds / Store::find_ec_volume_disk_ids as the supporting primitive. Mirrored in seaweed-volume/src/ (unmount log in Store::unmount_ec_shard, heartbeat delete log in diff_ec_shard_delta_messages, refusal in the ReceiveFile handler). * test(ec): stub VolumeEcShardsUnmount/Delete on the fake volume server The plugin-worker EC tests boot a fake volume server that embeds UnimplementedVolumeServerServer. After the worker started calling VolumeEcShardsUnmount + VolumeEcShardsDelete pre-distribute, the default Unimplemented response surfaced as fourteen "method not implemented" errors and TestErasureCodingExecutionEncodesShards failed. Both RPCs are no-ops here — nothing on the fake server has mounted state or persisted shard files to remove. |
||
|
Chris LuandGitHub
|
2c1482f7a6 |
fix(ec): clear cross-server stale EC shards before re-distribute (#9478) (#9499)
* fix(ec): clear cross-server stale EC shards before re-distribute (#9478) A previous failed encode leaves partial .ec?? shards mounted on destination volume servers that are not the .dat owner. PR #9480 only prunes when the .dat sits on a sibling disk of the SAME store, so the cross-server case stays stuck: every retry trips volume_grpc_copy.go:570's "ec volume %d is mounted; refusing overwrite" guard and the scheduler loops. Detection already lists existing EC shards as CleanupECShards sources; plumb the shard ids through (ActiveTopology.GetECShardLocations, TaskSourceSpec, TaskSource.shard_ids) and have the EC worker call VolumeEcShardsUnmount + VolumeEcShardsDelete on each destination after the local shard set is generated and before distributeEcShards. Skip EC-shard sources in getReplicas so the post-encode VolumeDelete step does not target destination-only nodes. Integration test mounts a partial shard subset, asserts the mounted-volume refusal, runs cleanupStaleEcShards, and asserts the next ReceiveFile lands. * chore(ec): tighten code comments in stale-shard cleanup Drop issue-number refs from code comments and shorten the docstrings on cleanupStaleEcShards / unmountAndDeleteEcShards / getReplicas plus the new test file. Behavior unchanged. * fix(ec): skip empty-ShardIds locations; dedupe getReplicas by node GetECShardLocations dropped entries where ecShardMatchesCollection saw a phantom info record with EcIndexBits=0 — without ShardIds, getReplicas misread the resulting source as a regular replica and would have called VolumeDelete on a destination-only node. getReplicas now dedupes by Node since VolumeDelete is server-wide; per-disk source rows on the same server collapse to one call. * refactor(ec): use MaxShardCount and ShardBits in collectShardIdsForDisk Drop the literal 32 bit-iteration bound for erasure_coding.MaxShardCount and treat the EcIndexBits union as a ShardBits so Count() drives the slice preallocation. Keeps the helper aligned with the rest of the EC code and survives any future expansion of the shard-count ceiling. |
||
|
Chris LuandGitHub
|
3a8389cd68 |
fix(ec): verify full shard set before deleting source volume (#9490) (#9493)
* fix(ec): verify full shard set before deleting source volume (#9490) Before this change, both the worker EC task and the shell ec.encode command would delete the source .dat as soon as MountEcShards returned — even if distribute/mount failed partway, leaving fewer than 14 shards in the cluster. The deletion was logged at V(2), so by the time someone noticed missing data the only trace was a 0-byte .dat synthesized by disk_location at next restart. - Worker path adds Step 6: poll VolumeEcShardsInfo on every destination, union the bitmaps, and refuse to call deleteOriginalVolume unless all TotalShardsCount distinct shard ids are observed. A failed gate leaves the source readonly so the next detection scan can retry. - Shell ec.encode adds the same gate after EcBalance, walking the master topology with collectEcNodeShardsInfo. - VolumeDelete RPC success and .dat/.idx unlinks now log at V(0) so any source destruction is traceable in default-verbosity production logs. The EC-balance-vs-in-flight-encode race is intentionally left for a follow-up; balance should refuse to move shards for a volume whose encode job is not in Completed state. * fix(ec): trim doc comments on the new shard-verification path Drop WHAT-describing godoc on freshly added helpers; keep only the WHY notes (query-error policy in VerifyShardsAcrossServers, the #9490 reference at the call sites). * fix(ec): drop issue-number anchors from new comments Issue references age poorly — the why behind each comment already stands on its own. * fix(ec): parametrize RequireFullShardSet on totalShards Take totalShards as an argument instead of reading the package-level TotalShardsCount constant. The OSS callers continue to pass 14, but the helper is now usable with any DataShards+ParityShards ratio. * test(plugin_workers): make fake volume server respond to VolumeEcShardsInfo The new pre-delete verification gate calls VolumeEcShardsInfo on every destination after mount, and the fake server's UnimplementedVolumeServer returns Unimplemented — the verifier read that as zero shards on every node and aborted source deletion. Build the response from recorded mount requests so the integration test exercises the gate end-to-end. * fix(rust/volume): log .dat/.idx unlink with size in remove_volume_files Mirror the Go-side change in weed/storage/volume_write.go: stat each file before removing and emit an info-level log for .dat/.idx so a destructive call is always traceable. The OSS Rust crate previously unlinked them silently. * fix(ec/decode): verify regenerated .dat before deleting EC shards After mountDecodedVolume succeeds, the previous code immediately unmounts and deletes every EC shard. A silent failure in generate or mount could leave the cluster with neither shards nor a valid normal volume. Probe ReadVolumeFileStatus on the target and refuse to proceed if dat or idx is 0 bytes. Also make the fake volume server's VolumeEcShardsInfo reflect whichever shard files exist on disk (seeded for tests as well as mounted via RPC), so the new gate can be exercised end-to-end. * fix(ec): address PR review nits in verification + fake server - Drop unused ServerShardInventory.Sizes field. - Skip shard ids >= MaxShardCount before bitmap Set so the ShardBits bound is explicit (Set already no-ops on overflow, this is for clarity). - Nil-guard the fake server's VolumeEcShardsInfo so a malformed call doesn't panic the test process. |
||
|
Chris LuandGitHub
|
532b088262 |
fix(ec): preserve source disk type across EC encoding (#9423) (#9449)
* fix(ec): carry source disk type on VolumeEcShardsMount (#9423) When EC shards land on a target whose disk type differs from the source volume's, master heartbeats wrongly reported under the target disk's type. Add source_disk_type to VolumeEcShardsMountRequest; the target server applies it to the in-memory EcVolume via SetDiskType so the mount notification and steady-state heartbeat both carry the source's disk type. Empty value falls back to the location's disk type (used by disk-scan reload paths). The override is not persisted with the volume — disk type stays an environmental property and .vif remains portable. * fix(ec): plumb source disk type through plugin worker (#9423) Add source_disk_type to ErasureCodingTaskParams (field 8; 7 reserved), populate it from the metric the detector already collects, thread it through ec_task into the MountEcShards helper, and forward it on the VolumeEcShardsMount RPC. * fix(ec): mirror source disk type plumbing in rust volume server (#9423) The volume_ec_shards_mount handler now forwards source_disk_type into mount_ec_shard → DiskLocation::mount_ec_shards. When non-empty it overrides ec_vol.disk_type (and each mounted shard's disk_type) via the new set_disk_type method; empty value keeps the location's disk type, so disk-scan reload and reconcile paths are unchanged. Also picks up two pre-existing proto drifts that 'make gen' synced from weed/pb (LockRingUpdate in master.proto, listing_cache_ttl_seconds in remote.proto). * feat(ec): bias placement toward preferred disk type (#9423) Add DiskCandidate.DiskType and PlacementRequest.PreferredDiskType. When PreferredDiskType is non-empty, SelectDestinations partitions suitable disks into matching/fallback tiers and runs the rack/server/ disk-diversity passes on the matching tier first; the fallback tier is only consulted if the matching pool can't satisfy ShardsNeeded. PlacementResult.SpilledToOtherDiskType lets callers warn on spillover. Empty PreferredDiskType keeps the existing single-pool behavior. * fix(ec): plumb source disk type into placement planner (#9423) diskInfosToCandidates now copies DiskInfo.DiskType into the placement candidate, and ecPlacementPlanner.selectDestinations forwards metric.DiskType as PreferredDiskType so EC shards land on disks matching the source volume's disk type when possible. A glog warning fires when placement had to spill to other disk types. * test(ec): integration coverage for source-disk-type plumbing (#9423) store_ec_disk_type_test exercises Store.MountEcShards end-to-end: a shard physically lives on an HDD location, MountEcShards is called with sourceDiskType="ssd", and the test asserts that the in-memory EcVolume, the mounted shard, the NewEcShardsChan notification, and the steady-state heartbeat all report under the source's disk type. A companion test pins the empty-source path so disk-scan reload keeps the location's disk type. detection_disk_type_test exercises the worker plumbing: with a cluster of nodes carrying both HDD and SSD disks, planECDestinations must place every shard on SSD when metric.DiskType="ssd"; with only one SSD node and 13 HDD nodes it must still satisfy a 10+4 layout via spillover (and log a warning). * revert(ec): drop unrelated proto drift in seaweed-volume/proto (#9423) make gen pulled two pre-existing OSS changes into the rust proto tree (LockRingUpdate / by_plugin in master.proto, listing_cache_ttl_seconds in remote.proto). Reviewers flagged it as scope creep — none of the rust EC fix references those fields. Restore both files to origin/master so this branch only touches EC-related symbols. * fix(ec placement): treat empty disk type as hdd and skip used racks on spill (#9423) partitionByDiskType used raw string comparison, so a PreferredDiskType of "hdd" never matched candidates whose DiskType is "" (the HardDriveType sentinel that weed/storage/types uses). EC encoding of an HDD source would spill onto any HDD reporting "" even when the cluster has plenty of matching capacity. Normalize both sides through normalizeDiskType, which lowercases and folds "" → "hdd", mirroring types.ToDiskType without taking a dependency on it. selectFromTier's rack-diversity pass also kept revisiting racks the preferred tier had already used when running on the fallback tier, which negated PreferDifferentRacks on spillover. Skip racks already in usedRacks so fallback placements still spread onto new racks. * fix(ec): empty-source remount must not clobber existing disk type (#9423) mount_ec_shards_with_idx_dir runs more than once per vid (RPC mount, disk-scan reload, orphan-shard reconcile). After an RPC sets the source-derived disk type, any later call passing source_disk_type="" was resetting ec_vol.disk_type back to the location's value, which reintroduces the heartbeat drift this PR is meant to fix. Only default to the location's disk type when the EC volume is fresh (no shards mounted yet); otherwise leave the recorded type alone so empty-source reloads preserve whatever the original mount RPC set. |
||
|
Chris LuandGitHub
|
628363c4a6 |
fix(erasure_coding): surface replica delete failures from EC task (#9184) (#9187)
* test(erasure_coding): reproduce #9184 deleteOriginalVolume swallowing errors ErasureCodingTask.deleteOriginalVolume logs a warning when any replica VolumeDelete fails and then returns nil, so the EC task reports success to the admin even when a source replica survives. That stale replica lets a later detection scan re-propose the same volume and, once retried, drives the mounted-shard-truncation corruption that issue 9184 also describes. Reproducer: wire one reachable replica (succeeds) and one unreachable replica (fails) and assert the function currently returns nil. After the fix the function must surface the replica failure so the task is retried rather than marked done, and this test needs to be inverted. * fix(erasure_coding): surface replica delete failures from EC task ErasureCodingTask.deleteOriginalVolume previously logged a warning and returned nil when any VolumeDelete against a source replica failed. The EC task therefore reported overall success to the admin even when a source replica stayed on disk, which let a later detection scan propose a duplicate EC encoding of the same volume. The retry then walked the ReceiveFile path against servers that already had mounted EC shards for the volume, truncating the live shard files in place (the other half of #9184). This change returns an error describing the per-replica failures after the best-effort delete pass, so the task is marked failed instead of silently moving on. Successful deletes are still applied (per-replica progress is preserved); only the final return changes. When combined with the ReceiveFile mount-safety check, a stuck original replica now produces loud, actionable failures instead of silent corruption. Tests: - TestDeleteOriginalVolumeSurfacesReplicaFailures: asserts an error is returned and names the unreachable replica, while the reachable replica still gets deleted. - TestDeleteOriginalVolumeSucceedsWhenAllReplicasReachable: pins the happy path. |
||
|
Chris LuandGitHub
|
940eed0bd3 |
fix(ec): generate .ecx before EC shards to prevent data inconsistency (#8972)
* fix(ec): generate .ecx before EC shards to prevent data inconsistency In VolumeEcShardsGenerate, the .ecx index was generated from .idx AFTER the EC shards were generated from .dat. If any write occurred between these two steps (e.g. WriteNeedleBlob during replica sync, which bypasses the read-only check), the .ecx would contain entries pointing to data that doesn't exist in the EC shards, causing "shard too short" and "size mismatch" errors on subsequent reads and scrubs. Fix by generating .ecx FIRST, then snapshotting datFileSize, then encoding EC shards. If a write sneaks in after .ecx generation, the EC shards contain more data than .ecx references — which is harmless (the extra data is simply not indexed). Also snapshot datFileSize before EC encoding to ensure the .vif reflects the same .dat state that .ecx was generated from. Add TestEcConsistency_WritesBetweenEncodeAndEcx that reproduces the race condition by appending data between EC encoding and .ecx generation. * fix: pass actual offset to ReadBytes, improve test quality - Pass offset.ToActualOffset() to ReadBytes instead of 0 to preserve correct error metrics and error messages within ReadBytes - Handle Stat() error in assembleFromIntervalsAllowError - Rename TestEcConsistency_DatFileGrowsDuringEncoding to TestEcConsistency_ExactLargeRowEncoding (test verifies fixed-size encoding, not concurrent growth) - Update test comment to clarify it reproduces the old buggy sequence - Fix verification loop to advance by readSize for full data coverage * fix(ec): add dat/idx consistency check in worker EC encoding The erasure_coding worker copies .dat and .idx as separate network transfers. If a write lands on the source between these copies, the .idx may have entries pointing past the end of .dat, leading to EC volumes with .ecx entries that reference non-existent shard data. Add verifyDatIdxConsistency() that walks the .idx and verifies no entry's offset+size exceeds the .dat file size. This fails the EC task early with a clear error instead of silently producing corrupt EC volumes. * test(ec): add integration test verifying .ecx/.ecd consistency TestEcIndexConsistencyAfterEncode uploads multiple needles of varying sizes (14B to 256KB), EC-encodes the volume, mounts data shards, then reads every needle back via the EC read path and verifies payload correctness. This catches any inconsistency between .ecx index entries and EC shard data. * fix(test): account for needle overhead in test volume fixture WriteTestVolumeFiles created a .dat of exactly datSize bytes but the .idx entry claimed a needle of that same size. GetActualSize adds header + checksum + timestamp overhead, so the consistency check correctly rejects this as the needle extends past the .dat file. Fix by sizing the .dat to GetActualSize(datSize) so the .idx entry is consistent with the .dat contents. * fix(test): remove flaky shard ID assertion in EC scrub test When shard 0 is truncated on disk after mount, the volume server may detect corruption via parity mismatches (shards 10-13) rather than a direct read failure on shard 0, depending on OS caching/mmap behavior. Replace the brittle shard-0-specific check with a volume ID validation. * fix(test): close upload response bodies and tighten file count assertion Wrap UploadBytes calls with ReadAllAndClose to prevent connection/fd leaks during test execution. Also tighten TotalFiles check from >= 1 to == 1 since ecSetup uploads exactly one file. |
||
|
Chris LuandGitHub
|
d074830016 |
fix(worker): pass compaction revision and file sizes in EC volume copy (#8835)
* fix(worker): pass compaction revision and file sizes in EC volume copy The worker EC task was sending CopyFile requests without the current compaction revision (defaulting to 0) and with StopOffset set to math.MaxInt64. After a vacuum compaction this caused the volume server to reject the copy or return stale data. Read the volume file status first and forward the compaction revision and actual file sizes so the copy is consistent with the compacted volume. * propagate erasure coding task context * fix(worker): validate volume file status and detect short copies Reject zero dat file size from ReadVolumeFileStatus — a zero-sized snapshot would produce 0-byte copies and broken EC shards. After streaming, verify totalBytes matches the expected stopOffset and return an error on short copies instead of logging success. * fix(worker): reject zero idx file size in volume status validation A non-empty dat with zero idx indicates an empty or corrupt volume. Without this guard, copyFileFromSource gets stopOffset=0, produces a 0-byte .idx, passes the short-copy check, and generateEcShardsLocally runs against a volume with no index. * fix fake plugin volume file status * fix plugin volume balance test fixtures |
||
|
Chris LuandGitHub
|
7354fa87f1 |
refactor ec shard distribution (#8465)
* refactor ec shard distribution * fix shard assignment merge and mount errors * fix mount error aggregation scope * make WithFields compatible and wrap errors |
||
|
Chris LuandGitHub
|
4f647e1036 |
Worker set its working directory (#8461)
* set working directory * consolidate to worker directory * working directory * correct directory name * refactoring to use wildcard matcher * simplify * cleaning ec working directory * fix reference * clean * adjust test |
||
 
|
6a3a97333f |
Add support for TLS in gRPC communication between worker and volume server (#8370)
* Add support for TLS in gRPC communication between worker and volume server * address comments * worker: capture shared grpc.DialOption in BalanceTask registration closure * worker: capture shared grpc.DialOption in ErasureCodingTask registration closure * worker: capture shared grpc.DialOption in VacuumTask registration closure * worker: use grpc.worker security configuration section for tasks * plugin/worker: fix compilation errors by passing grpc.DialOption to task constructors * plugin/worker: prevent double-counting in EC skip counters --------- Co-authored-by: Chris Lu <chris.lu@gmail.com> |
||
|
Chris LuandGitHub
|
208d7f24f4 |
Erasure Coding: Ec refactoring (#7396)
* refactor: add ECContext structure to encapsulate EC parameters
- Create ec_context.go with ECContext struct
- NewDefaultECContext() creates context with default 10+4 configuration
- Helper methods: CreateEncoder(), ToExt(), String()
- Foundation for cleaner function signatures
- No behavior change, still uses hardcoded 10+4
* refactor: update ec_encoder.go to use ECContext
- Add WriteEcFilesWithContext() and RebuildEcFilesWithContext() functions
- Keep old functions for backward compatibility (call new versions)
- Update all internal functions to accept ECContext parameter
- Use ctx.DataShards, ctx.ParityShards, ctx.TotalShards consistently
- Use ctx.CreateEncoder() instead of hardcoded reedsolomon.New()
- Use ctx.ToExt() for shard file extensions
- No behavior change, still uses default 10+4 configuration
* refactor: update ec_volume.go to use ECContext
- Add ECContext field to EcVolume struct
- Initialize ECContext with default configuration in NewEcVolume()
- Update LocateEcShardNeedleInterval() to use ECContext.DataShards
- Phase 1: Always uses default 10+4 configuration
- No behavior change
* refactor: add EC shard count fields to VolumeInfo protobuf
- Add data_shards_count field (field 8) to VolumeInfo message
- Add parity_shards_count field (field 9) to VolumeInfo message
- Fields are optional, 0 means use default (10+4)
- Backward compatible: fields added at end
- Phase 1: Foundation for future customization
* refactor: regenerate protobuf Go files with EC shard count fields
- Regenerated volume_server_pb/*.go with new EC fields
- DataShardsCount and ParityShardsCount accessors added to VolumeInfo
- No behavior change, fields not yet used
* refactor: update VolumeEcShardsGenerate to use ECContext
- Create ECContext with default configuration in VolumeEcShardsGenerate
- Use ecCtx.TotalShards and ecCtx.ToExt() in cleanup
- Call WriteEcFilesWithContext() instead of WriteEcFiles()
- Save EC configuration (DataShardsCount, ParityShardsCount) to VolumeInfo
- Log EC context being used
- Phase 1: Always uses default 10+4 configuration
- No behavior change
* fmt
* refactor: update ec_test.go to use ECContext
- Update TestEncodingDecoding to create and use ECContext
- Update validateFiles() to accept ECContext parameter
- Update removeGeneratedFiles() to use ctx.TotalShards and ctx.ToExt()
- Test passes with default 10+4 configuration
* refactor: use EcShardConfig message instead of separate fields
* optimize: pre-calculate row sizes in EC encoding loop
* refactor: replace TotalShards field with Total() method
- Remove TotalShards field from ECContext to avoid field drift
- Add Total() method that computes DataShards + ParityShards
- Update all references to use ctx.Total() instead of ctx.TotalShards
- Read EC config from VolumeInfo when loading EC volumes
- Read data shard count from .vif in VolumeEcShardsToVolume
- Use >= instead of > for exact boundary handling in encoding loops
* optimize: simplify VolumeEcShardsToVolume to use existing EC context
- Remove redundant CollectEcShards call
- Remove redundant .vif file loading
- Use v.ECContext.DataShards directly (already loaded by NewEcVolume)
- Slice tempShards instead of collecting again
* refactor: rename MaxShardId to MaxShardCount for clarity
- Change from MaxShardId=31 to MaxShardCount=32
- Eliminates confusing +1 arithmetic (MaxShardId+1)
- More intuitive: MaxShardCount directly represents the limit
fix: support custom EC ratios beyond 14 shards in VolumeEcShardsToVolume
- Add MaxShardId constant (31, since ShardBits is uint32)
- Use MaxShardId+1 (32) instead of TotalShardsCount (14) for tempShards buffer
- Prevents panic when slicing for volumes with >14 total shards
- Critical fix for custom EC configurations like 20+10
* fix: add validation for EC shard counts from VolumeInfo
- Validate DataShards/ParityShards are positive and within MaxShardCount
- Prevent zero or invalid values that could cause divide-by-zero
- Fallback to defaults if validation fails, with warning log
- VolumeEcShardsGenerate now preserves existing EC config when regenerating
- Critical safety fix for corrupted or legacy .vif files
* fix: RebuildEcFiles now loads EC config from .vif file
- Critical: RebuildEcFiles was always using default 10+4 config
- Now loads actual EC config from .vif file when rebuilding shards
- Validates config before use (positive shards, within MaxShardCount)
- Falls back to default if .vif missing or invalid
- Prevents data corruption when rebuilding custom EC volumes
* add: defensive validation for dataShards in VolumeEcShardsToVolume
- Validate dataShards > 0 and <= MaxShardCount before use
- Prevents panic from corrupted or uninitialized ECContext
- Returns clear error message instead of panic
- Defense-in-depth: validates even though upstream should catch issues
* fix: replace TotalShardsCount with MaxShardCount for custom EC ratio support
Critical fixes to support custom EC ratios > 14 shards:
disk_location_ec.go:
- validateEcVolume: Check shards 0-31 instead of 0-13 during validation
- removeEcVolumeFiles: Remove shards 0-31 instead of 0-13 during cleanup
ec_volume_info.go ShardBits methods:
- ShardIds(): Iterate up to MaxShardCount (32) instead of TotalShardsCount (14)
- ToUint32Slice(): Iterate up to MaxShardCount (32)
- IndexToShardId(): Iterate up to MaxShardCount (32)
- MinusParityShards(): Remove shards 10-31 instead of 10-13 (added note about Phase 2)
- Minus() shard size copy: Iterate up to MaxShardCount (32)
- resizeShardSizes(): Iterate up to MaxShardCount (32)
Without these changes:
- Custom EC ratios > 14 total shards would fail validation on startup
- Shards 14-31 would never be discovered or cleaned up
- ShardBits operations would miss shards >= 14
These changes are backward compatible - MaxShardCount (32) includes
the default TotalShardsCount (14), so existing 10+4 volumes work as before.
* fix: replace TotalShardsCount with MaxShardCount in critical data structures
Critical fixes for buffer allocations and loops that must support
custom EC ratios up to 32 shards:
Data Structures:
- store_ec.go:354: Buffer allocation for shard recovery (bufs array)
- topology_ec.go:14: EcShardLocations.Locations fixed array size
- command_ec_rebuild.go:268: EC shard map allocation
- command_ec_common.go:626: Shard-to-locations map allocation
Shard Discovery Loops:
- ec_task.go:378: Loop to find generated shard files
- ec_shard_management.go: All 8 loops that check/count EC shards
These changes are critical because:
1. Buffer allocations sized to 14 would cause index-out-of-bounds panics
when accessing shards 14-31
2. Fixed arrays sized to 14 would truncate shard location data
3. Loops limited to 0-13 would never discover/manage shards 14-31
Note: command_ec_encode.go:208 intentionally NOT changed - it creates
shard IDs to mount after encoding. In Phase 1 we always generate 14
shards, so this remains TotalShardsCount and will be made dynamic in
Phase 2 based on actual EC context.
Without these fixes, custom EC ratios > 14 total shards would cause:
- Runtime panics (array index out of bounds)
- Data loss (shards 14-31 never discovered/tracked)
- Incomplete shard management (missing shards not detected)
* refactor: move MaxShardCount constant to ec_encoder.go
Moved MaxShardCount from ec_volume_info.go to ec_encoder.go to group it
with other shard count constants (DataShardsCount, ParityShardsCount,
TotalShardsCount). This improves code organization and makes it easier
to understand the relationship between these constants.
Location: ec_encoder.go line 22, between TotalShardsCount and MinTotalDisks
* improve: add defensive programming and better error messages for EC
Code review improvements from CodeRabbit:
1. ShardBits Guardrails (ec_volume_info.go):
- AddShardId, RemoveShardId: Reject shard IDs >= MaxShardCount
- HasShardId: Return false for out-of-range shard IDs
- Prevents silent no-ops from bit shifts with invalid IDs
2. Future-Proof Regex (disk_location_ec.go):
- Updated regex from \.ec[0-9][0-9] to \.ec\d{2,3}
- Now matches .ec00 through .ec999 (currently .ec00-.ec31 used)
- Supports future increases to MaxShardCount beyond 99
3. Better Error Messages (volume_grpc_erasure_coding.go):
- Include valid range (1..32) in dataShards validation error
- Helps operators quickly identify the problem
4. Validation Before Save (volume_grpc_erasure_coding.go):
- Validate ECContext (DataShards > 0, ParityShards > 0, Total <= MaxShardCount)
- Log EC config being saved to .vif for debugging
- Prevents writing invalid configs to disk
These changes improve robustness and debuggability without changing
core functionality.
* fmt
* fix: critical bugs from code review + clean up comments
Critical bug fixes:
1. command_ec_rebuild.go: Fixed indentation causing compilation error
- Properly nested if/for blocks in registerEcNode
2. ec_shard_management.go: Fixed isComplete logic incorrectly using MaxShardCount
- Changed from MaxShardCount (32) back to TotalShardsCount (14)
- Default 10+4 volumes were being incorrectly reported as incomplete
- Missing shards 14-31 were being incorrectly reported as missing
- Fixed in 4 locations: volume completeness checks and getMissingShards
3. ec_volume_info.go: Fixed MinusParityShards removing too many shards
- Changed from MaxShardCount (32) back to TotalShardsCount (14)
- Was incorrectly removing shard IDs 10-31 instead of just 10-13
Comment cleanup:
- Removed Phase 1/Phase 2 references (development plan context)
- Replaced with clear statements about default 10+4 configuration
- SeaweedFS repo uses fixed 10+4 EC ratio, no phases needed
Root cause: Over-aggressive replacement of TotalShardsCount with MaxShardCount.
MaxShardCount (32) is the limit for buffer allocations and shard ID loops,
but TotalShardsCount (14) must be used for default EC configuration logic.
* fix: add defensive bounds checks and compute actual shard counts
Critical fixes from code review:
1. topology_ec.go: Add defensive bounds checks to AddShard/DeleteShard
- Prevent panic when shardId >= MaxShardCount (32)
- Return false instead of crashing on out-of-range shard IDs
2. command_ec_common.go: Fix doBalanceEcShardsAcrossRacks
- Was using hardcoded TotalShardsCount (14) for all volumes
- Now computes actual totalShardsForVolume from rackToShardCount
- Fixes incorrect rebalancing for volumes with custom EC ratios
- Example: 5+2=7 shards would incorrectly use 14 as average
These fixes improve robustness and prepare for future custom EC ratios
without changing current behavior for default 10+4 volumes.
Note: MinusParityShards and ec_task.go intentionally NOT changed for
seaweedfs repo - these will be enhanced in seaweed-enterprise repo
where custom EC ratio configuration is added.
* fmt
* style: make MaxShardCount type casting explicit in loops
Improved code clarity by explicitly casting MaxShardCount to the
appropriate type when used in loop comparisons:
- ShardId comparisons: Cast to ShardId(MaxShardCount)
- uint32 comparisons: Cast to uint32(MaxShardCount)
Changed in 5 locations:
- Minus() loop (line 90)
- ShardIds() loop (line 143)
- ToUint32Slice() loop (line 152)
- IndexToShardId() loop (line 219)
- resizeShardSizes() loop (line 248)
This makes the intent explicit and improves type safety readability.
No functional changes - purely a style improvement.
|
||
 
|
25bbf4c3d4 |
Admin UI: Fetch task logs (#7114)
* show task details * loading tasks * task UI works * generic rendering * rendering the export link * removing placementConflicts from task parameters * remove TaskSourceLocation * remove "Server ID" column * rendering balance task source * sources and targets * fix ec task generation * move info * render timeline * simplified worker id * simplify * read task logs from worker * isValidTaskID * address comments * Update weed/worker/tasks/balance/execution.go Co-authored-by: Copilot <175728472+Copilot@users.noreply.github.com> * Update weed/worker/tasks/erasure_coding/ec_task.go Co-authored-by: Copilot <175728472+Copilot@users.noreply.github.com> * Update weed/worker/tasks/task_log_handler.go Co-authored-by: Copilot <175728472+Copilot@users.noreply.github.com> * fix shard ids * plan distributing shard id * rendering planned shards in task details * remove Conflicts * worker logs correctly * pass in dc and rack * task logging * Update weed/admin/maintenance/maintenance_queue.go Co-authored-by: gemini-code-assist[bot] <176961590+gemini-code-assist[bot]@users.noreply.github.com> * display log details * logs have fields now * sort field keys * fix link * fix collection filtering * avoid hard coded ec shard counts --------- Co-authored-by: Copilot <175728472+Copilot@users.noreply.github.com> Co-authored-by: gemini-code-assist[bot] <176961590+gemini-code-assist[bot]@users.noreply.github.com> |
||
|
|
9d013ea9b8 |
Admin UI: include ec shard sizes into volume server info (#7071)
* show ec shards on dashboard, show max in its own column * master collect shard size info * master send shard size via VolumeList * change to more efficient shard sizes slice * include ec shard sizes into volume server info * Eliminated Redundant gRPC Calls * much more efficient * Efficient Counting: bits.OnesCount32() uses CPU-optimized instructions to count set bits in O(1) * avoid extra volume list call * simplify * preserve existing shard sizes * avoid hard coded value * Update weed/storage/erasure_coding/ec_volume_info.go Co-authored-by: Copilot <175728472+Copilot@users.noreply.github.com> * Update weed/admin/dash/volume_management.go Co-authored-by: Copilot <175728472+Copilot@users.noreply.github.com> * Update ec_volume_info.go * address comments * avoid duplicated functions * Update weed/admin/dash/volume_management.go Co-authored-by: gemini-code-assist[bot] <176961590+gemini-code-assist[bot]@users.noreply.github.com> * simplify * refactoring * fix compilation --------- Co-authored-by: Copilot <175728472+Copilot@users.noreply.github.com> Co-authored-by: gemini-code-assist[bot] <176961590+gemini-code-assist[bot]@users.noreply.github.com> |
||
|
Chris LuandGitHub
|
0975968e71 |
admin: Refactor task destination planning (#7063)
* refactor planning into task detection * refactoring worker tasks * refactor * compiles, but only balance task is registered * compiles, but has nil exception * avoid nil logger * add back ec task * setting ec log directory * implement balance and vacuum tasks * EC tasks will no longer fail with "file not found" errors * Use ReceiveFile API to send locally generated shards * distributing shard files and ecx,ecj,vif files * generate .ecx files correctly * do not mount all possible EC shards (0-13) on every destination * use constants * delete all replicas * rename files * pass in volume size to tasks |