* refactor(command): expand "~" in all path-style CLI flags
Many of weed's path-bearing flags (-s3.config, -s3.iam.config,
-admin.dataDir, -webdav.cacheDir, -volume.dir.idx, TLS cert/key
files, profile output paths, mount cache dirs, sftp key files, ...)
were never run through util.ResolvePath, so a value like "~/iam.json"
was used literally. Tilde only worked when the shell expanded it,
which silently fails for the common -flag=~/path form (bash leaves
the tilde literal in --opt=~/path).
- Extend util.ResolvePath to also handle "~user" / "~user/rest",
matching shell tilde expansion. Add unit tests.
- Apply util.ResolvePath at the top of each shared start* function
(s3, webdav, sftp) so mini/server/filer/standalone callers all
inherit it; resolve at the few one-off use sites (mount cache
dirs, volume idx folder, mini admin.dataDir, profile paths).
- Drop the duplicate expandHomeDir helper from admin.go in favor of
the now-equivalent util.ResolvePath.
* fixup: handle comma-separated -dir flags for tilde expansion
`weed mini -dir`, `weed server -dir`, and `weed volume -dir` accept
comma-separated paths (`dir[,dir]...`). Calling util.ResolvePath on
the whole string mishandled multi-folder values with tilde, e.g.
"~/d1,~/d2" would resolve as if "d1,~/d2" were a single subpath.
- Add util.ResolveCommaSeparatedPaths: split on ",", run each entry
through ResolvePath, rejoin. Short-circuits when no "~" present.
- Use it for *miniDataFolders (mini.go), *volumeDataFolders (server.go),
and resolve each entry of v.folders in-place (volume.go) so all
downstream consumers see resolved paths.
- Add 7-case TestResolveCommaSeparatedPaths covering empty, single,
multiple, and mixed inputs.
* address PR review: metaFolder + Windows backslash
- master.go: resolve *m.metaFolder at the top of runMaster so
util.FullPath(*m.metaFolder) on the next line sees an expanded
path. Drop the now-redundant ResolvePath in TestFolderWritable.
- server.go: same treatment for *masterOptions.metaFolder, paired
with the existing cpu/mem profile resolves. Drop the redundant
inner ResolvePath at TestFolderWritable.
- file_util.go: ResolvePath now accepts filepath.Separator as a
separator after the tilde, so "~\\data" works on Windows. Other
platforms keep current behaviour (backslash stays literal because
it is a valid filename character in usernames and paths).
- file_util_test.go: add two cases using filepath.Separator that
exercise the new code path on Windows and remain a no-op on Unix.
* address PR review: resolve "~" in remaining command path flags
Comprehensive sweep of path-bearing flags across every weed
subcommand, applying util.ResolvePath in-place at the top of each
run* function so all downstream consumers see expanded paths.
- webdav.go: resolve *wo.cacheDir at the top of startWebDav so
mini/server/filer/standalone callers all inherit it.
- mount_std.go: cpu/mem profile paths.
- filer_sync.go: cpu/mem profile paths.
- mq_broker.go: cpu/mem profile paths.
- benchmark.go: cpuprofile output path.
- backup.go: -dir resolved once at runBackup; drop the duplicated
inline ResolvePath in NewVolume calls.
- compact.go: -dir resolved at runCompact; drop inline ResolvePath.
- export.go: -dir and -o resolved at runExport; drop inline
ResolvePath in LoadFromIdx and ScanVolumeFile.
- download.go: -dir resolved at runDownload; drop inline.
- update.go: -dir resolved at runUpdate so filepath.Join uses the
expanded path; drop inline ResolvePath in TestFolderWritable.
- scaffold.go: -output expanded before filepath.Join.
- worker.go: -workingDir expanded before being passed to runtime.
* address PR review: resolve option-struct paths at run* entry points
server.go:381 propagates s3Options.config to filerOptions.s3ConfigFile
*before* startS3Server runs, which meant the filer-side code saw the
unresolved tilde-prefixed pointer. Same pattern for webdavOptions and
sftpOptions (and equivalent in mini.go / filer.go).
The fix: hoist resolution from the shared start* functions up to the
run* entry points, where every shared pointer is set up before any
propagation happens.
- s3.go, webdav.go, sftp.go: extract a resolvePaths() method on each
Options struct that runs every path field through util.ResolvePath
in-place. Idempotent.
- runS3, runWebDav, runSftp: call the standalone struct's resolvePaths
before starting metrics / loading security config.
- runServer, runMini, runFiler: call resolvePaths on every embedded
options struct, plus resolve loose flags (serverIamConfig,
miniS3Config, miniIamConfig, miniMasterOptions.metaFolder, and
filer's defaultLevelDbDirectory) so they're expanded before any
pointer copy or use.
- Drop the now-redundant inline ResolvePath at filer's
defaultLevelDbDirectory composition.
* address PR review: re-resolve mini -dir post-config, cover misc paths
- mini.go: applyConfigFileOptions can overwrite -dir with a literal
~/data from mini.options. Re-resolve *miniDataFolders after the
config-file apply, alongside the other path resolves, so the mini
filer no longer ends up with a literal ~/data/filerldb2.
- benchmark.go: resolve *b.idListFile (-list).
- filer_sync.go: resolve *syncOptions.aSecurity / .bSecurity
(-a.security / -b.security) before LoadClientTLSFromFile.
- filer_cat.go: resolve *filerCat.output (-o) before os.OpenFile.
- admin.go: drop trailing blank line at EOF (git diff --check).
* address PR review: resolve -a.security/-b.security/-config before use
Three follow-up fixes:
- filer_sync.go: the -a.security / -b.security resolves were placed
*after* LoadClientTLSFromFile / LoadHTTPClientFromFile were called,
so weed filer.sync -a.security=~/a.toml still passed the literal
tilde path. Hoist the resolves above the security-loading block so
TLS clients see expanded paths.
- filer_sync_verify.go: same flag pair was never resolved at all in
the verify command; resolve at the top of runFilerSyncVerify.
- filer_meta_backup.go: -config (the backup_filer.toml path) was
passed directly to viper. Resolve at the top of runFilerMetaBackup.
- mini.go: master.dir defaulted to the entire comma-joined
miniDataFolders. With weed mini -dir=~/d1,~/d2 (or any multi-dir
setup), TestFolderWritable then stat'd the joined string instead
of a single directory. Default to the first entry via StringSplit
to mirror the disk-space calculation a few lines below, and drop
the now-redundant ResolvePath in TestFolderWritable.
* fix(mount): remove fid pool to stop master over-allocating volumes
The writeback-cache fid pool pre-allocated file IDs with
ExpectedDataSize = ChunkSizeLimit (typically 8+ MB). The master's
PickForWrite charges count * expectedDataSize against the volume's
effectiveSize, so a full pool refill could charge hundreds of MB
against a single volume before any bytes were actually written.
That tripped RecordAssign's hard-limit path and eagerly removed
volumes from writable, causing the master to grow new volumes
even when the real data being written was tiny.
Drop the pool entirely. Every chunk upload goes through
UploadWithRetry -> AssignVolume with no ExpectedDataSize hint,
letting the master fall back to the 1 MB default estimate. The
mount->filer grpc connection is already cached in pb.WithGrpcClient
(non-streaming mode), so per-chunk AssignVolume is a unary RPC
over an existing HTTP/2 stream, not a full dial. Path-based
filer.conf storage rules now apply to mount chunk assigns again,
which the pool had to skip.
Also remove the now-unused operation.UploadWithAssignFunc and its
AssignFunc type.
* fix(upload): populate ExpectedDataSize from actual chunk bytes
UploadWithRetry already buffers the full chunk into `data` before
calling AssignVolume, so the real size is known. Previously the
assign request went out with ExpectedDataSize=0, making the master
fall back to the 1 MB DefaultNeedleSizeEstimate per fid — same
over-reservation symptom the pool had, just smaller per call.
Stamp ExpectedDataSize = len(data) before the assign RPC when the
caller hasn't already set it. This covers mount chunk uploads,
filer_copy, filersink, mq/logstore, broker_write, gateway_upload,
and nfs — all the UploadWithRetry paths.
* fix(assign): pass real ExpectedDataSize at every assign call site
After removing the mount fid pool, per-chunk AssignVolume calls went
out with ExpectedDataSize=0, making the master fall back to its 1 MB
DefaultNeedleSizeEstimate. That's still an over-estimate for small
writes. Thread the real payload size through every remaining assign
site so RecordAssign charges effectiveSize accurately and stops
prematurely marking volumes full.
- filer: assignNewFileInfo now takes expectedDataSize and stamps it
on both primary and alternate VolumeAssignRequests. Callers pass:
- SSE data-to-chunk: len(data)
- copy manifest save: len(data)
- streamCopyChunk: srcChunk.Size
- TUS sub-chunk: bytes read
- saveAsChunk (autochunk/manifestize): 0 (small, size unknown
until the reader is drained; master uses 1 MB default)
- filer gRPC remote fetch-and-write: ExpectedDataSize = chunkSize
after the adaptive chunkSize is computed.
- ChunkedUploadOption.AssignFunc gains an expectedDataSize parameter;
upload_chunked.go passes the buffered dataSize at the call site.
S3 PUT assignFunc stamps it on the AssignVolumeRequest.
- S3 copy: assignNewVolume / prepareChunkCopy take expectedDataSize;
all seven call sites pass the source chunk's Size.
- operation.SubmitFiles / FilePart.Upload: derive per-fid size from
FileSize (average for batched requests, real per-chunk size for
sequential chunk assigns).
- benchmark: pass fileSize.
- filer append-to-file: pass len(data).
* fix(assign): thread size through SaveDataAsChunkFunctionType
The saveAsChunk path (autochunk, filer_copy, webdav, mount) ran
AssignVolume before the reader was drained, so it had to pass
ExpectedDataSize=0 and fall back to the master's 1 MB default.
Add an expectedDataSize parameter to SaveDataAsChunkFunctionType.
- mergeIntoManifest already has the serialized manifest bytes, so
it passes uint64(len(data)) directly.
- Mount's saveDataAsChunk ignores the parameter because it uses
UploadWithRetry, which already stamps len(data) on the assign
after reading the payload.
- webdav and filer_copy saveDataAsChunk follow the same UploadWithRetry
path and also ignore the hint.
- Filer's saveAsChunk (used for manifestize) plumbs the value to
assignNewFileInfo so manifest-chunk assigns get a real size.
Callers of saveFunc-as-value (weedfs_file_sync, dirty_pages_chunked)
pass the chunk size they're about to upload.
* adjust "weed benchmark" CLI to use readOnly/writeOnly
* consistently use "-master" CLI option
* If both -readOnly and -writeOnly are specified, the current logic silently allows it with -writeOnly taking precedence. This is confusing and could lead to unexpected behavior.
* listing files to convert to parquet
* write parquet files
* save logs into parquet files
* pass by value
* compact logs into parquet format
* can skip existing files
* refactor
* refactor
* fix compilation
* when no partition found
* refactor
* add untested parquet file read
* rename package
* refactor
* rename files
* remove unused
* add merged log read func
* parquet wants to know the file size
* rewind by time
* pass in stop ts
* add stop ts
* adjust log
* minor
* adjust log
* skip .parquet files when reading message logs
* skip non message files
* Update subscriber_record.go
* send messages
* skip message data with only ts
* skip non log files
* update parquet-go package
* ensure a valid record type
* add new field to a record type
* Update read_parquet_to_log.go
* fix parquet file name generation
* separating reading parquet and logs
* add key field
* add skipped logs
* use in memory cache
* refactor
* refactor
* refactor
* refactor, and change compact log
* refactor
* rename
* refactor
* fix format
* prefix v to version directory
* Added global http client
* Added Do func for global http client
* Changed the code to use the global http client
* Fix http client in volume uploader
* Fixed pkg name
* Fixed http util funcs
* Fixed http client for bench_filer_upload
* Fixed http client for stress_filer_upload
* Fixed http client for filer_server_handlers_proxy
* Fixed http client for command_fs_merge_volumes
* Fixed http client for command_fs_merge_volumes and command_volume_fsck
* Fixed http client for s3api_server
* Added init global client for main funcs
* Rename global_client to client
* Changed:
- fixed NewHttpClient;
- added CheckIsHttpsClientEnabled func
- updated security.toml in scaffold
* Reduce the visibility of some functions in the util/http/client pkg
* Added the loadSecurityConfig function
* Use util.LoadSecurityConfiguration() in NewHttpClient func
* Added context for the MasterClient's methods to avoid endless loops
* Returned WithClient function. Added WithClientCustomGetMaster function
* Hid unused ctx arguments
* Using a common context for the KeepConnectedToMaster and WaitUntilConnected functions
* Changed the context termination check in the tryConnectToMaster function
* Added a child context to the tryConnectToMaster function
* Added a common context for KeepConnectedToMaster and WaitUntilConnected functions in benchmark
