mirror of
https://github.com/seaweedfs/seaweedfs.git
synced 2026-09-29 19:25:35 +00:00
80fd3635d29af32359ca4eb7d3036ff3ca551788
300
Commits
| Author | SHA1 | Message | Date | |
|---|---|---|---|---|
  
|
8ad2f29e3e |
shell: let volume.deleteEmpty drop volumes with no live needles (#11437)
* shell: let volume.deleteEmpty drop volumes with no live needles The candidate check only accepted a .dat at superblock size, so a volume whose every needle was deleted still had to be vacuumed first — minutes of compaction to rewrite bytes that were all garbage anyway. FileCount counts every indexed entry and DeleteCount every entry made garbage by overwrite or delete, so FileCount <= DeleteCount means nothing live remains and the volume can be unlinked directly. The quietFor guard is unchanged. * volume server: add only_garbage VolumeDelete guard VolumeDelete(only_empty) refuses every volume that ever held data, so a volume whose needles are all deleted could only be removed after a vacuum rewrote it. The new only_garbage flag deletes only when the byte counters show nothing live: DeletedSize covering all of ContentSize, the same all-garbage state vacuum measures. Byte counters are used because the file/delete counts drift on index reload. * rust volume: mirror only_garbage VolumeDelete guard Same check as the Go server: a volume deletes under only_garbage when its deleted bytes cover all content bytes. The grpc handler rejects before the store drops the volume from its map, since destroy errors after removal would still unmount it. * volume delete: let either enabled check pass, keep onlyEmpty on the wire An upgraded shell sending only_garbage to a pre-upgrade server would be read as an unconditional delete (field ignored, only_empty false). The request now keeps only_empty set so old servers check emptiness and refuse, while new servers delete when either check passes. * volume.deleteEmpty: skip remote-backed and protected read-only volumes A remote-tiered replica shares its cloud object with the other replicas, so keepRemoteData=false on one delete removes data they still reference. Protected read-only volumes are quarantined or under maintenance, which is exactly when a replica should not be dropped. * volume delete: validate guarded copies across disks before deleting * volume delete: hold copy locks across guarded validate-and-delete CheckVolumeDeletable released each copy's locks before Destroy ran, so a write landing on a later copy between the two passes refused its destroy after earlier copies were already removed. Pin every copy's dataFileAccessLock (and its location's volumesLock) across validation and removal so a refused delete leaves all copies intact. * volume delete: send deleted-volume notices after releasing locks A blocking send on a full DeletedVolumesChan under volumesLock can stall the heartbeat loop that drains it while it waits on the same locks. Collect the notices under the lock span and send after release. * pb: restore generated-file cosmetics to match the repo's protoc version Generated with [Devin](https://devin.ai) Co-Authored-By: Devin <158243242+devin-ai-integration[bot]@users.noreply.github.com> --------- Co-authored-by: Devin <158243242+devin-ai-integration[bot]@users.noreply.github.com> |
||
 Ilia DemianenkoandGitHub
|
c58bd0dfd3 |
s3: honor assignment fsync in UploadWithRetry (#11449)
* fix: honor assignment fsync in UploadWithRetry * Tests feedback |
||
|
Chris LuandGitHub
|
37bf1cd91d |
volume: validate copy/tail source addresses before dialing (#11390)
* pb: stop exiting the process on malformed server addresses ServerToGrpcAddress and GrpcAddressToServerAddress called glog.Fatalf when hostAndPort could not parse the port, which os.Exit(255)ed the whole process. A caller-supplied copy or tail source address reached this path synchronously in the serving goroutine, so one anonymous VolumeCopy with a non-numeric port terminated the volume server. Log the parse error and return the input unchanged instead: the dial or request that consumes the address then fails as an ordinary error. * volume: validate copy and tail source addresses before dialing VolumeCopy, VolumeEcShardsCopy and VolumeTailReceiver dial a caller-supplied source address (SourceDataNode / SourceVolumeServer) with no endpoint validation, so an anonymous caller could aim the volume server at loopback, link-local (cloud metadata) or other unintended destinations and read dial behavior back as a connectivity oracle. Apply the same peer-target deny list FetchAndWriteNeedle uses for replica targets: the source must be a bare host:port whose host is not loopback, link-local or unspecified; cluster peers stay reachable on private networks, and -volume.allowUntrustedRemoteEndpoints opts out. The loopback-using copy tests set the flag to keep exercising the copy path in process. * rust volume: validate copy and tail source addresses before dialing Mirror the Go guard on the Rust volume server: volume_copy, volume_ec_shards_copy and volume_tail_receiver dial a caller-supplied source address, so run it through validate_replica_target first (bare host:port; no loopback, link-local or unspecified hosts; private peers stay allowed). --volume.allowUntrustedRemoteEndpoints opts out; the test fixture and the Rust test-cluster launcher set it so loopback sources in tests keep working. * volume: pin validated copy/tail source addresses at dial time validateReplicaTarget resolves the source hostname once, but the gRPC client resolved it again at connect, leaving a DNS-rebinding window for hostname sources. The copy and tail source dials now run through the same guardedDialerPolicy the remote-storage path uses, so every resolved address is re-checked against the replica deny list (private peers allowed) immediately before the TCP connect. guardedDialerPolicy also moves to util.OutboundDialContext so the guarded path keeps the -ip.bind source binding the default gRPC dialer had. The Rust volume server mirrors this with connect_guarded, a tonic connector that resolves, re-checks each address, and connects to the first passing IP; handlers use it whenever the untrusted-endpoint opt-out is off. A handler-level test now exercises the enabled validation branches for all three source-taking RPCs. * pb: return empty server address for malformed grpc addresses GrpcAddressToServerAddress used to return the unparseable input on a hostAndPort failure, so a malformed raft address (e.g. "host:abc") flowed into admin dashboard master maps unchanged. Return an empty string instead, skip empty conversions at the two raft-cluster merge sites, and drop the now-stale comment about the fatal exit the earlier commit removed. * test: opt erasure-coding loopback clusters out of the remote endpoint guard The erasure-coding suites drive VolumeEcShardsCopy / VolumeCopy between volume servers bound to 127.0.0.1, which the copy/tail source guard now rejects by default. Pass -volume.allowUntrustedRemoteEndpoints to the test volume launches, matching what the volume_server framework harnesses already do. * admin: only claim fallback master leadership on an empty raft response A nonempty RaftListClusterServers response whose entries were all rejected left masterMap empty, so the fallback marked the reachable current master as leader the same way a genuinely empty (non-raft) response does. Track whether the successful response returned zero servers and only promote the fallback master then. |
||
|
Chris LuandGitHub
|
15e4da65f7 |
volume: avoid read-only replica write targets (#11195)
* master: carry replica read-only state in volume lookups * volume: refresh writable replica targets * volume: preserve read-only replicas for deletes * master: propagate read-only delete capability * volume: target delete-capable replicas * volume: honor configured HTTPS for replica deletes * volume: reject insecure delete authorization forwarding * master: broadcast delete capability changes * volume: align Rust replica routing * http: protect credentialed replica redirects * master: preserve digest compatibility for delete capability * volume: propagate read-only state in short heartbeats * volume: report changed short volume state * http: guard TLS client redirects * master: announce mounted volume read-only state * volume: replace changed identity deltas * master: replace incremental volume layouts in order * master: keep moved volume lookup available * volume: announce read-only mounts |
||
|
Chris LuandGitHub
|
a0b1272cc3 |
filer: authorize the chunk proxy and the root listing like the rest of the filer port (#11152)
* filer: require a read token for the root listing maybeCheckJwtAuthorization waved through every GET/HEAD on "/", so a filer with jwt.filer_signing.read.key set still served its root directory listing -- entry names, sizes and chunks[].file_id -- to a caller holding no token at all, and served the same listing to a token restricted by allowed_prefixes. The exemption was added for health checks before the filer had /healthz and /readyz. Both are registered on the default and read-only muxes ahead of the "/" handler and answer without a token, so drop it. Point the mTLS harness at /healthz, which is what it was probing for. * filer: keep the jwt query parameter out of a proxied chunk request The proxy stripped "jwt" from the forwarded query on reads only, on the grounds that a writer's own credential travels there. It does not: an uploader carries its AssignVolume token in the Authorization header, and the query parameter on this path holds a filer credential. Strip it for every method. A volume server has no business seeing a filer token, and because security.GetJwt reads the query before the header, relaying one would hide the writer's own token behind it. * filer: dispatch the chunk proxy after the JWT gate The ?proxyChunkId= branch returned before maybeCheckJwtAuthorization ran, so GET, PUT, POST and DELETE against any needle in the cluster were reachable on the filer's HTTP port with no filer credential, on a filer where every other request answered 401. An anonymous caller read a stored object, replaced its bytes, or deleted the needle, which the master's next vacuum makes permanent. #10434 stopped the filer from minting a volume write token for that caller, which closes the write half only where the volume server has a jwt.signing.key of its own -- not the shipped default, and not what scaffold/security.toml recommends for a filer deployment. The read half stayed open in every configuration, because the filer mints the read token itself. Move the dispatch below the gate. A file id carries no path, so a token restricted by allowed_prefixes cannot be scoped against one and is refused here; every consumer of this endpoint holds an unrestricted token. * filer: mint the volume credential for a proxied write too The proxy minted a volume token on reads and forwarded whatever the caller sent on writes. #10434 made it that way because the branch ran ahead of the JWT gate, so a token minted here would have been signed for an unauthenticated caller; the branch now runs behind the gate, and the credential the caller presents there is a filer one, which a volume server cannot validate and has no business seeing. Mint at the access level the request needs, and drop the caller's Authorization when there is no key to mint from. A proxied uploader then needs only the filer credential, instead of holding one for each hop with a single header to put them in. * mount, mq, filer.sync: send the filer credential for a proxied chunk Every in-tree consumer of ?proxyChunkId= reached the filer anonymously: mount and the broker put the AssignVolume token in the Authorization header, which is a volume credential, and filer.sync sent nothing at all. That was enough only while the branch ran ahead of the filer's JWT gate. Build the URL through one helper, and pick the credential from the URL it returns: a chunk proxied through a filer is a request to the filer, which authorizes it and attaches the volume credential itself, so the token there is a filer one at the access level the request needs. * filer: honor -exposeDirectoryData The flag was declared on all three commands that start a filer and read by none of them: FilerOption.ExposeDirectoryData was only ever assigned from filer.expose_directory_metadata in security.toml, so -exposeDirectoryData=false silently left the listing exposed. Only the TOML key had any effect. Plumb the flag through and let either switch turn the listing off. * filer: count a proxied chunk request once Moving the dispatch below the gate put it after the deferred request observation, so every proxied chunk now landed in FilerRequestHistogram twice, once under its HTTP method and once under chunkProxy. Name the deferred one after the proxy instead, the way the unsupported-method branch already does, which also gives the endpoint the status codes FilerRequestCounter records. |
||
 
|
7620e96171 |
expose whether a volume replica is backed by remote storage, and prefer local replicas (#11105)
* expose whether a volume replica is backed by remote storage
Volume locations returned by lookups do not indicate whether a replica
has been tiered to remote storage. Readers cannot distinguish a local
replica from a remote-backed one, so they may hit a remote-backed
replica first even when a local replica is available.
Add DataInRemote to the lookup location message, populate it from the
master's volume info, and carry it through the wdclient vid map so
clients can prefer local replicas when resolving chunk locations.
* wdclient: prefer local volume replicas over remote-tier replicas on lookup
LookupFileIdWithFallback (and the publicUrl variant in FilerClient)
didn't honor the DataInRemote flag when shuffling URLs, so the
DataInRemote patch only took effect in LookupVolumeServerUrl. Apply
the same ReorderToFront(localUrls) to sameDcUrls/otherDcUrls so
non-remote replicas stay at the front, matching the existing vidMap
convention.
* wdclient: propagate DataInRemote across tier transitions on existing replicas
When a volume is tiered to remote storage or a remote-backed replica is
restored locally, the cached DataInRemote on the same volume-server URL
stayed at its old value because two pieces of state never updated:
* master_grpc_server.go only split newVolumes and (already-tracked) volumes
into NewVids vs RemoteVids. ChangedVolumes went straight to NewVids, so
the broadcast announced the re-classified volume as a fresh arrival and
the client had no way to tell whether its existing cache was stale.
* vid_map.addLocationToMap early-returned when an entry already had the
same URL. A tier transition reports the same URL with DataInRemote
flipped, so the cached entry stayed at the old classification.
Wire both sides together: ChangedVolumes now go through the same IsRemote
split as newVolumes, and addLocationToMap replaces the existing entry in
place when the URL matches but DataInRemote has changed. The server
reference key only depends on URL/grpc port, so the refcount does not
move across the flip.
Adds vid_map_remote_transition_test.go covering the local->remote and
remote->local paths so the in-place update and the cache-key stability
are pinned by tests.
* wdclient: prefer local replicas across data-center boundaries
The previous local-first ordering hoisted local URLs to the front of each
data-center bucket separately, then concatenated same-DC before other-DC.
That meant a same-DC remote replica could still be tried before an
other-DC local replica even though the local one would answer cheaply.
Reorder once across the full candidate list: concatenate same-DC and
other-DC first, then ReorderToFront pulls every local replica to the very
front while preserving the DC preference inside each tier. Apply the same
ordering in all four lookup paths so the cached vidMap, the
LookupFileIdWithFallback provider path, FilerClient.GetLookupFileIdFunction
(PublicUrl-preferred variant), and the deprecated filer.LookupFn all agree:
- weed/wdclient/vid_map.go (LookupVolumeServerUrl)
- weed/wdclient/vidmap_client.go (LookupFileIdWithFallback)
- weed/wdclient/filer_client.go (LookupFileId)
- weed/filer/reader_at.go (LookupFn)
Strengthen the existing local-first tests: vidmap_client_localfirst_test
now asserts both endpoints are present (not just the local one is first),
and slice_test asserts an exact match instead of accepting two orderings.
Add TestLookupFileIdWithFallbackGlobalLocalFirst to pin the cross-DC
ordering invariant: any local replica (same or other DC) precedes every
remote-tier replica; within each tier DC1 precedes DC2.
Add docstrings to ToVolumeLocations, ReorderToFront, LookupVolumeServerUrl,
LookupFileId, GetVidLocations, GetLocations, LookupFileIdWithFallback, and
updateVidMap so the touched lookup paths are described in one place.
* topology: broadcast tier transitions on existing replicas
When a volume replica is tiered to remote storage or restored locally, the
wdclient's cached DataInRemote went stale: every connected client kept
preferring a remote-backed replica over a freshly restored local one, or
demoted a freshly tiered remote replica. The fix in commit
|
||
|
Chris LuandGitHub
|
3431bdcb74 |
s3: fix UploadPartCopy with volume-data encryption (#10971)
* operation: give an encrypted chunk the plaintext ETag With -encryptVolumeData the volume server stores ciphertext, so it cannot echo a Content-MD5 back and the chunk lands with an empty ETag. Every ETag derived from those chunks then comes out empty for a single chunk, or d41d8cd98f00b204e9800998ecf8427e-N for several. The caller already hashes the plaintext to send as Content-MD5, so keep that digest as the chunk ETag instead of dropping it, and compute it for a WantMd5 caller under cipher too. * s3: re-encrypt a part copy from a volume-encrypted source UploadPartCopy raw-copies source chunks when neither side uses SSE, which also caught -encryptVolumeData sources. Those chunks are ciphertext a whole-chunk cipher key decrypts, so copying a byte range out of one and keeping the key leaves a destination that fails authentication on GET, and the copied chunks carry no ETag for the part result to report. Route them through the re-encrypting path already used for SSE: it reads the source as plaintext, hashes the part, and writes the destination under the gateway's own encryption. * s3: fetch only the range a part copy asked for The re-encrypting UploadPartCopy path opened the source at offset 0 and threw the prefix away, so assembling an object part by part read the source once per part. Now that volume-encrypted sources take this path too, that is the common case rather than an SSE corner. The chunk stream already seeks, so hand it the range. * s3: reject an unsatisfiable copy-source-range A part copy has no way to report a short part, so a range reaching past the source cannot be clamped the way a GET clamps one. The fast path silently produced a part shorter than asked for, or an empty one; the re-encrypting path pads with zeros, so a 2 MiB source copied as bytes=1048576-9999999 came back as 1 MiB of data followed by 7.5 MiB of nothing. Answer InvalidRange instead, which is what s3-tests' test_multipart_copy_invalid_range expects. |
||
|
Chris LuandGitHub
|
44115c1051 |
filer: stop TUS uploads from turning into garbage (#10945)
* filer: store TUS sub-chunks through the regular chunk writer A TUS sub-chunk was written with one assigned file id, retried up to three times against that same id, and abandoned on failure: an attempt that had landed on some replicas left a needle no session record and no entry ever references, unreclaimable by vacuum. dataToChunkWithSSE, which the regular write path uses per chunk, assigns a fresh file id per attempt and hands back the file ids of failed attempts, which are now freed the way the regular write path frees them. * filer: retry a chunk write on a fresh volume when the server 5xxs The filer's chunk writer assigns a fresh file id per attempt but only retried transient network errors, so a volume filling up and turning read-only mid-write failed the whole request even though the very next assignment would have landed elsewhere. Every other write client already routes this through ShouldReassignUpload; the filer's own write path now does the same, for regular uploads and TUS sub-chunks alike. * filer: export the chunk deletion queue The filer test harness in weed/server builds filer.Filer as a struct literal, so any code path reaching DeleteChunks dereferenced a nil queue. Exported like the neighboring DeletionRetryQueue so the harness can arm it. * filer: complete a TUS upload whose chunk records overlap A PATCH retried while its predecessor was still storing a sub-chunk - a proxy timeout with an immediate retry is enough - records the same range twice. HEAD computes Upload-Offset as the covered watermark and reported the upload fully received, but completion demanded exactly adjacent records and failed every attempt: the client concluded success from offset == length, no entry was created, and the session eventually expired, turning the entire upload into deleted needles for the vacuum to chew through. Completion now validates gapless coverage with the same watermark HEAD uses. A record extending coverage joins the entry - the read path resolves partial overlaps by ModifiedTsNs, and the raced copies carry identical bytes - while a fully covered duplicate is freed once the entry lands. * filer: allow one mutating TUS request per session at a time Nothing stopped two PATCHes from writing the same range concurrently: both loaded the same offset, both passed the conflict check, and both recorded their sub-chunks. A client whose request timed out in a proxy retries immediately while the server side is still storing the buffered sub-chunk, which is exactly that race. A session now accepts one PATCH or DELETE at a time, the way tusd locks uploads; a concurrent one is refused with 423 Locked, which TUS clients retry, and HEAD keeps answering so progress polling is unaffected. The chunk state is loaded under the claim, so a retried PATCH sees every record its predecessor left and conflicts cleanly instead of duplicating data. * test: cover a TUS PATCH raced by its own retry Stalls a PATCH mid-body over a raw connection, retries the same range while it is in flight, and expects the retry refused with 423 Locked; the upload then resumes from the reported offset and the final content must be intact. * filer: never free a TUS duplicate the entry still references Coverage is computed from ranges, so a record fully covered by another is treated as a duplicate no matter which needle it names. A malformed record naming a file id the entry keeps would have had that needle freed right after the entry landed - the corruption this change set exists to stop. The duplicates are now freed in one batch, skipping any file id the entry references; their records go with the session directory. * test: bound the raw TUS connection reads http.ReadResponse on the stalled PATCH's connection blocked until the whole go test timeout if the filer never answered. * filer: free the needles of chunk write attempts a retry replaced A volume server stores the needle locally and only then fans out to the replicas, so a replication failure 5xxs with the data already written. Each attempt assigns its own file id, so once a later attempt lands elsewhere nothing references the earlier ones: the caller only sees the chunk that succeeded, and the failed ids were dropped. They are now freed the way the caller frees them when the whole write fails. Retrying on a 5xx makes this reachable on every read-only or full volume, which is exactly the condition that filled the reporter's volumes. |
||
 孙超andGitHub
|
c80664ec21 |
s3: propagate storage rule fsync to volume server uploads (#10906)
The storage rule's fsync decision was computed by the filer (detectStorageOption -> rule.Fsync) and applied on the filer's own HTTP write path, but was never carried onto the chunk uploads S3 issues: the AssignVolumeResponse had no fsync field, so the s3api client could not learn the decision, and the chunked upload URL was hardcoded without it. Every S3 write to a path with fsync configured went to the volume server as a non-fsync write. Carry the decision through the assign response: - filer.proto: AssignVolumeResponse gains bool fsync, filled from the storage option the assign resolved. - operation.AssignResult gains Fsync, so uploadChunk can append ?fsync=true to the volume server upload URL (single and replica fan-out paths). - The S3 PUT/UploadPart assignFunc, the S3 copy path, the admin file browser upload, and the Iceberg worker assign functions all forward the response field. Adds TestUploadReaderInChunksAppendsFsyncWhenAssigned. |
||
|
Chris LuandGitHub
|
94f8e2caf9 |
EC: handle zero-sized shard files uniformly (moves, rebuilds, startup cleanup) (#10753)
* volume_move: treat zero-sized EC shards as absent in move verification A zero-sized shard file is residue of a failed operation (issue 10730), not a shard - but VerifyEcShards only checked presence, so a copy that landed as an empty file passed verification and the source was deleted behind it. Size zero now reads as absent, with a distinct error naming the zero-sized shard so the operator can tell a broken copy from a missing one. * storage: exclude zero-sized EC shards from rebuilds and clean up stale ones The reproducer in issue 10730: a zero-sized shard file left by a failed operation was selected as a Reed-Solomon input and failed the whole rebuild with an input size mismatch, because input discovery checked existence, not substance. - RebuildEcFiles treats a zero-sized shard file as missing and regenerates over it in place (the reclassified-corrupt path: temp file beside the residue, atomic rename). - The startup/rescan shard loader, which always skipped zero-sized files, now deletes them once they are older than an hour - young enough files can be an in-flight copy's just-created file, since the same scan runs from LoadNewVolumes while serving. Regression tests: a rebuild with one emptied shard regenerates it byte-identical; the loader deletes a stale zero-sized shard and leaves a fresh one alone. * storage: age-check each zero-shard cleanup candidate individually The shard scan merges the data and idx directory listings, so the age-checked entry and a deletion candidate can be different files sharing one name - a stale zero-sized file in one directory next to a fresh same-named file in the other (possibly an in-flight copy's just-created one) could get the fresh file deleted. Each candidate's own modification time now decides, both directories are handled in one pass, and the split-directory case is pinned by a test. |
||
|
Chris LuandGitHub
|
4f50c5b0d4 |
feat: throughput limits for replicate, EC shard, and worker-driven moves (#10749)
* feat: throughput limits for replicate, EC shard, and worker-driven moves VolumeCopy was the only rate-limitable transfer; EC shard copies, replica creation, and worker-driven moves all ran at whatever the receiving server's maintenance rate allowed, with no per-operation control. - proto: VolumeEcShardsCopyRequest and the balance / ec_balance task params and configs gain io_byte_per_second; 0 keeps today's behavior (the volume server's own maintenance rate governs). - volume server: VolumeEcShardsCopy throttles with one WriteThrottler per request, shared across the shard, .ecx, .ecj, .vif, and .ecsum copies so the limit caps the transfer as a whole - the same shape as VolumeCopy. - volume_move: ReplicateVolume accepts the limit; EcMoveOptions carries it through MoveEcShards/CopyAndMountEcShards into the copy request, with fake-client tests asserting propagation. - shell: ec.balance gains -ioBytePerSecond; volume.tier.move's replication top-up honors the command's existing -ioBytePerSecond instead of running unthrottled. - worker: balance and ec_balance configs gain io_byte_per_second (surfaced in the admin config schema), carried through detection and plugin job parameters into task params and handed to the shared mover; batch balance jobs inherit the limit from their detection results. The limit is per copy stream, so maxParallelization multiplies the aggregate ceiling. * worker plugins: expose io_byte_per_second in the plugin config and derive it The plugin-driven detection path derives its task Config from the plugin configuration values, and both balance and ec_balance left IoBytePerSecond at zero there - a configured limit silently reverted to the server maintenance rate. Both derive functions now read the field (clamped at zero), and the plugin descriptors expose it with defaults so the configuration form carries it. |
||
|
Chris LuandGitHub
|
0799084e98 |
refactor: share volume and EC shard move logic between shell and workers (#10727)
* operation: add shared volume_move package for volume and EC shard moves The shell commands (volume.move, volume.balance, ec.balance, tier moves) and the maintenance workers (balance, ec_balance) each carried their own copy of the move RPC sequences, and the copies had drifted: the worker verified the target before deleting the source but dropped the disk type and IO throttle; the shell passed those but deleted the source unverified. volume_move.Mover carries the merged sequences, keeping the stricter behavior from each side: - LiveMoveVolume: check-then-hard-freeze the source (VolumeStatus's IsReadOnly also covers low-disk and readonly-but-can-delete states, which still accept needle deletes), copy with disk type and IO throttle, tail, verify the target is not behind the source before the destructive source delete (a target that is ahead holds writes it accepted during the tail and the move commits to keep them), and restore the source's writability when a failure precedes the delete and this move did the freezing. Aborts clean up the incomplete target copy; a failed cleanup or an ambiguous source delete keeps the source readonly (ErrSourceKeptReadonly) so callers do not thaw a source next to a possibly-authoritative copy. With a readonly source, an existing or unknown-state target refuses the move outright: no client-side observation can prove such a copy is a stale remnant rather than the authoritative copy of an unfinished move. - MoveEcShards: copy with the .ecx/.ecj/.vif/.ecsum sidecars, mount, verify the target registered every shard before unmount+delete on the source, and reject same-server moves (the EC delete is server-wide). Server identity is the grpc endpoint (SameServer), so node:8080 and node:8080.18080 compare equal while test servers sharing a degenerate HTTP address stay distinct; addresses are validated non-fatally before dialing and before being embedded in copy/tail requests, since both the client dialer and the receiving server normalize them through a parser that aborts the process on a malformed port. The Rust volume server's codes.NotFound counts as a definitively absent probe answer alongside the Go server's plain-error code Unknown. All RPCs go through an injectable ClientFunc, so the sequences are unit tested against a fake volume server client: RPC order, request fields, and that verification failures keep the source intact. * shell, worker: delegate volume and EC shard moves to operation/volume_move LiveMoveVolume and the copy/tail/delete/mark-writable helpers become thin wrappers over the shared mover, keeping their signatures; the EC helpers keep their per-step output and delegate the RPCs. BalanceTask and ECBalanceTask keep their parameter validation, progress reporting, and guards (same-node cross-disk rejection, dedup keep-node verification, shard ids range-checked before the uint8 narrowing) and hand the RPC sequences to the mover. volume.tier.move skips its thaw-on-failure when the mover deliberately kept the source readonly, since reopening the replicas beside a possibly-authoritative target copy would fork the volume. The tail-failure tolerance moves inside the mover: a failed tail is tolerated only when the volume was already readonly before the move began, backstopped by a stability re-read across the idle window, so volume.balance's -skipTailError-by-readonly heuristic and tier-move's unconditional skip both become the same authoritative rule. * volume_move: keep the source readonly when a failed copy leaves a target of unknown origin A failed copy can leave a complete, mounted copy on the target (the server finishes after the client loses the stream). The abort probed the target only when its pre-copy state was known-absent; an unknown prior state skipped both the probe and the cleanup and then reopened the source - two writable replicas of one volume, diverging from the next write on. The abort now probes the target on every failed copy and restores the source only when the target provably holds nothing. A copy whose provenance cannot be proven (unknown prior state, a pre-existing replica, or an unreachable target) is never deleted, and the source stays readonly with ErrSourceKeptReadonly naming the recovery. * test: teach the plugin worker harness the shared move sequence The fake volume server lacked VolumeStatus, which the shared mover now issues before freezing the source, and the batch execution test's status-read accounting predates the pre-copy target probe and the verification reads. Mirrors the harness the enterprise tree already carries. |
||
   
|
ab79d1f680 |
operation: re-assign chunk upload when replica volume is full (#10588)
* operation: re-assign chunk upload when replica volume is full When a volume reaches MaxPossibleVolumeSize, needle writes return 'Volume Size Exceeded' and the fan-out in uploadChunkToHolders fails. Previously the error propagated immediately, killing the entire chunked upload even though the master has other writable volumes. Fix: detect 'Volume Size' errors on the fan-out path, call AssignFunc again to get a fresh volume, and retry (up to 3 attempts). This avoids backup failures while a single replica volume is full and waiting for GC. Also add 'volume size exceeded' to the transient error messages so any retry path that checks IsTransientError recognises it. * util: fix transient error pattern for volume size errors The actual error message is 'Volume Size 34361499680 Exceeded 34359738368' where the numeric size separates 'Volume Size' from 'Exceeded'. The previous pattern 'volume size exceeded' would never match. Change to 'volume size' which correctly matches any capacity-full error. * operation: fix reassignment loop nits - Case-insensitive volume size match (strings.ToLower) - Propagate AssignFunc error so caller sees reassignment failure - Reset JWT fallback before each reassignment to avoid retaining stale auth * util: stop classifying a full volume as a transient error A volume at capacity does not become writable on the next attempt, so the entry only bought a retry loop's worth of sleeping before the same failure. It also reached four consumers that all retry the same target — the deletion queue, the replication sink, volume lookups, and Retry/MultiRetry — none of which reassign, and the widened "volume size" substring swallowed the replica-receive rejection from WriteNeedleBlob too. The chunked upload path recovers by asking for a different volume instead. * operation: reassign a chunk with the shared upload gate shouldReassignUpload already answers this question for the non-chunked path, keyed off the status the volume server returned rather than its message text. Reusing it covers a lost replica peer and an unreachable target as well as a full volume, and it stops a 4xx from being retried on a second volume that would reject it identically. Pulling the single attempt out into uploadChunk keeps the retry loop readable now that it wraps both the fan-out and the relay path. * test: cover chunk reassignment across volumes Pins the three outcomes the gate decides: a full volume moves the chunk to a fresh assignment, a 4xx stays put, and the loop gives up after chunkAssignAttempts volumes. * operation: roll back the fid a reassigned chunk abandons ReplicatedWrite commits the needle locally before it replicates, so a 5xx can leave a copy behind on a volume the chunk is about to walk away from. Nothing will ever reference that fid, and an unreferenced needle is not garbage vacuum can find — it is dead space until the volume is destroyed. uploadChunkToHolders rolls back only the holders that reported success, which misses the one whose write landed but whose response did not, and the relay path had no rollback at all. Delete from every holder of the abandoned assignment instead; deleting a needle that never landed is a no-op. * operation: stop the reassignment loop from multiplying work retriedUploadData already retries a chunk three times against the same URL, so wrapping it in three assignments made nine POSTs for one chunk. On the relay path that inner retry is redundant — the loop retries everything it would, and on a different volume — so cap it at one attempt per assignment and leave the budget where it was. The fan-out path keeps its inner retries: absorbing a blip on one holder beats cancelling the rest and re-uploading the whole chunk. Nothing bounded any of it by time. weed/s3api passes context.Background() so a chunk survives client disconnect, which also means no deadline cuts the loop short, and a chunk goroutine holds one of four buffer slots while it spins. Break out once another chunk has already failed the object. * operation: keep the reassignment gate's inputs deterministic uploadChunkToHolders reported whichever holder error won the channel race. That was cosmetic while the value was only logged; now it decides whether the chunk moves to another volume, so a 400 and a 500 arriving in either order made the retry behavior depend on scheduling. Prefer an error the caller can act on, and the same failure always retries the same way. A failed reassignment also overwrote the upload error that prompted it, which buried a full volume behind whatever the filer happened to say. Keep both in the chain. The tests grew a JWT per assignment, since the loop re-derives one and nothing covered it, and the bound is now spelled out rather than compared against the constant that defines it. * operation: roll back the last abandoned fid too The rollback ran only on the path that goes on to reassign, so the attempt that exhausts the budget — or stops because another chunk already failed the object, or because the error is not one a different volume fixes — left its fid behind. That is the case that matters most: no chunk names it, the caller gets no fid to clean up, and a 5xx can still mean the needle was committed. Roll back on every failed attempt instead, before deciding whether to retry. --------- Co-authored-by: timolow <timolow@users.noreply.github.com> Co-authored-by: timolow <tim@timolow.com> Co-authored-by: Chris Lu <chris.lu@gmail.com> |
||
|
Chris LuandGitHub
|
e521a2a7b9 |
mount: re-assign to a live volume when a write can't land (#10239)
With replication 001 and one node down, ~2/3 of volumes have their replica on the dead node. The primary write lands locally but the replica forward fails, so the volume returns 500 "failed to write to replicas". #9744 made that upload fail fast so the client re-assigns, but the client retry never fired: the reassign gate matched a fixed list of error substrings that didn't include this one. The mount surfaced I/O error and dropped the chunk, leaving missing lines and null-byte gaps in an append workload while a node rebooted. Decide reassignment by HTTP status instead of matching message text. On the write path a volume server only 5xxs on a ReplicatedWrite failure (local disk, replica peer down, under-replication) — all of which a different volume dodges — so any 5xx reassigns; a no-response transport failure (the assigned target itself is down) reassigns too; a 4xx is a genuine client error and is surfaced. doUploadData tags its errors with the response status via uploadStatusError, and the gate moves from util.MultiRetry(errList) to util.RetryOnError(predicate). This drops the fragile substring list (and the message-prefix constants and guard test it needed); store_replicate.go is untouched. |
||
|
Chris LuandGitHub
|
155140bed8 |
s3: return IncompleteBody instead of 500 for truncated PUT bodies (#10186)
* s3: add IncompleteBody error code * operation: tag a truncated source read as ErrTruncatedBody The chunked uploader wraps both source-read failures and volume-upload failures, and a mid-write volume server drop also carries io.ErrUnexpectedEOF. Tag only the source read so callers can tell a truncated input apart from a server-side fault. * s3: return IncompleteBody for a truncated PUT body A client abort or reverse-proxy timeout truncates the request body mid-upload. putToFiler mapped every streaming-upload failure to InternalError (500), which a reverse proxy relays as a 502. Classify a source-read truncation as IncompleteBody (400) so the response matches AWS and passes through. All S3 write paths share putToFiler, so they all benefit. |
||
|
Chris LuandGitHub
|
cf64cafc3b |
volume: drop stale volume-location cache on under-replication (#10185)
* volume: drop stale volume-location cache on under-replication A replicated write looks up the volume's locations and caches them for 10 minutes. When the master briefly reports fewer replicas than the copy count (e.g. a stale heartbeat drops a just-added volume), that under-replicated result got cached, so every write failed with "replicating operations is less than replication copy count" until the entry expired -- long after the master re-registered the replica. Invalidate the cached entry when the location count is below the copy count, so the next write re-queries the master and recovers as soon as it heals. * volume: mirror the replication copy-count guard in seaweed-volume do_replicated_request accepted a write even when the master reported fewer locations than the volume's copy count, silently under-replicating. Reject it, matching Go's GetWritableRemoteReplications. lookup_volume is uncached, so the next write recovers as soon as the missing replica re-registers. |
||
 
|
bdcc3154ed |
refactor: centralize genUploadUrl in UploadOption (#10164)
* refactor: centralize genUploadUrl in UploadOption Replace inline genFileUrlFn closures with operation.GenUploadUrl field: - Add GenUploadUrl func(host, fileId) string to UploadOption struct - Add GenUploadUrlProxy(filerAddress string) utility function - Remove genFileUrlFn parameter from UploadWithRetry signature - Update all callers: mount, gateway, mq, filer_copy, filer_sync This matches the weed mount -filerProxy pattern exactly, factorizing the URL generation logic across all consumers. Co-Authored-By: Athena 🏛️ <hermes-agent@local> (custom / Qwen3.6-35B-A3B-UD-Q4_K_XL.gguf) * docker release: run all platform jobs in one wave, cache rocksdb compile Drop max-parallel so the 13 per-platform builds run together instead of two waves of 8 (rocksdb was queuing behind the cap and starting ~8 min late). Keep cache-to mode=max for rocksdb: its RocksDB static_lib compile is sha-independent, so it caches across releases and stops being the ~16-min long-pole that gates the merge fan-in. go-build variants stay mode=min. Co-Authored-By: Athena 🏛️ <hermes-agent@local> (custom / Qwen3.6-35B-A3B-UD-Q4_K_XL.gguf) * refactor: centralize genUploadUrl in UploadOption Replace inline genFileUrlFn closures with operation.GenUploadUrl field: - Add GenUploadUrl func(host, fileId) string to UploadOption struct - Add GenUploadUrlProxy(filerAddress string) utility function - Remove genFileUrlFn parameter from UploadWithRetry signature - Update all callers: mount, gateway, mq, filer_copy, filer_sync This matches the weed mount -filerProxy pattern exactly, factorizing the URL generation logic across all consumers. Co-Authored-By: Athena 🏛️ <hermes-agent@local> (custom / Qwen3.6-35B-A3B-UD-Q4_K_XL.gguf) * Remove accidental ROCmFPX submodule reference * gofmt chunk upload option block * Preserve broker cipher and re-read proxy filer per upload attempt Chunk uploads must keep the configured Cipher, and both the mount and broker current filer can change on failover, so build the proxy upload URL inside the closure instead of capturing the address once. --------- Co-authored-by: Chris Lu <chris.lu@gmail.com> |
||
|
Chris LuandGitHub
|
f643893891 |
fix(master): shed assign load when volume growth is already in flight (#10121)
Under a herd of concurrent assigns with no writable volume, Assign spun PickForWrite for the full 10s timeout, pinning a goroutine per request and starving the master of the cycles it needs to process growth and answer heartbeats. When growth is the relevant remedy and already in flight, stop spinning: if free space exists, shed with a fast retryable error so clients back off and retry once growth lands; if the cluster is out of space, fail fast with the real out-of-space error instead of masking it as retryable. The gRPC shed uses ResourceExhausted, not Unavailable: operation.Assign retries it, but the client connection layer doesn't treat it as a dead channel, so a per-request shed across a herd doesn't tear down the shared master connection and cancel every other in-flight assign. The HTTP dirAssignHandler sheds with 503 + Retry-After. |
||
 
|
81ed379884 |
volume server: route VolumeMarkReadonly to raft leader (#10120)
* volume server: route VolumeMarkReadonly to raft leader After a master raft election, volume servers may still heartbeat a follower while admin paths such as weed shell volume.mark call notifyMasterVolumeReadonly via vs.GetMaster(). Followers reject VolumeMarkReadonly with NotLeader, which breaks tiering and other mark-readonly workflows until the heartbeat loop reconnects. Resolve the leader through GetMasterConfiguration on configured -master peers (same Leader field filer/master clients already use) before calling VolumeMarkReadonly. When the leader differs from the heartbeat peer, update currentMaster so the heartbeat loop converges faster. Adds operation.LookupRaftLeaderMaster with unit tests. Co-authored-by: Cursor <cursoragent@cursor.com> * fix: address review feedback on volume.mark raft leader routing Do not update currentMaster during leader lookup — heartbeat owns that field and uses stream GetLeader() to reconnect. Try the heartbeat peer first and only resolve the raft leader after a NotLeader rejection. Add ctx.Err() early exit and quieter logging for context cancellation. Co-authored-by: Cursor <cursoragent@cursor.com> * fix(operation): thread the lookup timeout ctx into connection invalidation The 5s timeout drove only the RPC; WithMasterServerClient saw the unbounded outer ctx, so a self-inflicted timeout (slow GetMasterConfiguration during an election) was treated as a stale channel and tore down the shared master connection. Pass the timeout ctx into the helper so its own expiry leaves ctx.Err() set and spares the connection. --------- Co-authored-by: Cursor <cursoragent@cursor.com> Co-authored-by: Chris Lu <chris.lu@gmail.com> |
||
|
Chris LuandGitHub
|
95427b5573 |
security: add BearerPrefix constant for Authorization headers (#10101)
Introduce security.BearerPrefix ("Bearer ", RFC 6750) and use it
everywhere an "Authorization: Bearer <token>" header is constructed,
replacing the scattered "BEARER "/"Bearer " string literals. SeaweedFS
matches the scheme case-insensitively when parsing (security.GetJwt), so
behavior is unchanged; this removes the magic string and settles the
casing on the standard form. The parser's upper-case comparison stays as
is on purpose.
|
||
|
Chris LuandGitHub
|
96d2d13efe |
s3: replicate by fanning out from the gateway to every holder (#10078)
* s3: replicate by fanning out from the gateway to every holder The S3 gateway uploaded each chunk to one volume server, which then relayed the copies to the other replica holders. The gateway now uploads each chunk to every holder in parallel (type=replicate), removing the primary volume server's receive-then-resend relay. AssignVolume returns every replica holder (new repeated Location replicas, forwarded from the master assign), the s3api captures them, and the chunked uploader fans out whenever a chunk has more than one holder. Cipher uploads keep the server-driven path since per-call encryption would diverge the replicas. * s3: cancel sibling replica uploads on the first failure * s3: trim replica fan-out comments * s3: roll back successful fan-out chunk copies when a holder fails A failed fan-out records no FileChunk, so copies that landed on the holders that finished before the cancel were leaked as orphans the caller could not see. Track the holders that succeeded and delete the needle from each (type=replicate, local-only) on failure, leaving nothing behind. |
||
|
Chris LuandGitHub
|
ef109fe9e1 |
mount: don't hang close() when a writer is killed during flush (#10090)
* operation: bound AssignVolume with a deadline AssignVolume ran on context.Background(), so when the filer is overwhelmed the RPC could block indefinitely and wedge every caller holding the connection. Give it a 30s deadline so a stuck assign fails and the caller's retry/error path runs instead of hanging forever. * mount: abort flush when the FUSE request is interrupted On close(), a killed process blocks in fuse_flush waiting for the mount to answer. doFlush ran its metadata CreateEntry on context.Background() and ignored the kernel interrupt channel, so against an overwhelmed filer the flush never completed and the process stayed in uninterruptible sleep -- making the pod un-killable. Derive a context from the FUSE cancel channel in Flush/Fsync and thread it through doFlush -> flushMetadataToFiler -> streamCreateEntry; the retry loop stops as soon as the context is cancelled. Release and the pre-rename flush keep a non-cancellable context since they must finish regardless. * operation: harden the AssignVolume timeout test Make the test double's signal send non-blocking and bound the receive with a timeout so a regression can't wedge the test instead of failing it. |
||
 
|
20e4614fc6 |
feat(mount): attach Content-MD5 to chunk uploads (#10016)
* mount: attach Content-MD5 to chunk uploads
Mount writes never set UploadOption.Md5, so FileChunk.ETag stays empty
and filer.ETag() degenerates to md5("")-N: same-size files compare
equal regardless of content, defeating metadata-level verification
like filer.sync.verify.
Compute each chunk's MD5 and send it as Content-MD5. The volume server
verifies it on ingest (rejecting in-flight corruption) and echoes it
back, persisting FileChunk.ETag like filer/S3 writes already do.
The dirty-page flush paths already pass a *util.BytesReader whose
backing slice is the whole chunk, so the digest is taken in place with
no extra read, copy, or allocation (UploadWithRetry unwraps it the same
way downstream). Only the rarer plain-reader callers (e.g. manifest
chunks) fall back to io.ReadAll. Skipped under -cipher, where only the
ciphertext reaches the server.
The digest encoding (std-base64 of the raw md5) is the contract the
volume server verifies against, so it is factored into contentMD5Base64
and covered by a unit test.
Co-Authored-By: Claude Opus 4.8 (1M context) <noreply@anthropic.com>
* mount: compute chunk Content-MD5 in the uploader, not the caller
Move the WantMd5 hashing into UploadWithRetry, where the chunk is already
buffered for the retry path, so saveDataAsChunk stops type-switching the
reader and re-reading plain readers. One materialization point, and the
cipher exclusion lives next to the hash instead of at every call site.
---------
Co-authored-by: Claude Opus 4.8 (1M context) <noreply@anthropic.com>
Co-authored-by: Chris Lu <chris.lu@gmail.com>
|
||
|
Chris LuandGitHub
|
94357ac6a9 |
[volume] preserve compression state during replication (#9946)
* preserve compression state during replication * explain why ParseUpload skips compression for replica writes * fix data race on err result in FetchAndWriteNeedle The local-write and replica-write goroutines all wrote the named err return under an unsynchronized err==nil check. Give each goroutine its own error slot and combine after wg.Wait(): local error wins, then the first replica failure. * skip redundant decompression of compressed needles during replication doUploadData decompressed a compressed input only to report the clear-data length on UploadResult.Size, which both replication callers discard. Skip the decompress when IsReplication. |
||
|
Chris LuandGitHub
|
058569c77b |
operation: index VidCache by map instead of slice (#9853)
VidCache.cache was a []VidInfo indexed directly by volume id, so caching one volume with a large id grew the backing array to that many entries (each 48 bytes), allocating a zeroed slot for every unused id below it. A single id of 32M cost ~1.5GB resident, plus geometric realloc churn as the append loop doubled the array. Use map[uint32]VidInfo so memory scales with the number of volumes actually cached rather than the largest id seen. Parse ids with ParseUint(.,32) so values outside the uint32 volume-id range are rejected instead of silently wrapping into a key. |
||
|
Chris LuandGitHub
|
2386fa550a |
grpc: don't tear down the shared master connection on a caller's own timeout (#9775)
A Canceled/DeadlineExceeded from the caller's per-request context was treated like a dead channel: it closed the shared cached ClientConn and cancelled every other in-flight RPC on it with "the client connection is closing". Under a burst of concurrent chunk assigns (e.g. a large S3 multipart upload) one slow assign hitting its 10s attempt timeout could poison the connection for all the rest, cascading into a flood of 500s. Thread the caller's context into shouldInvalidateConnection and only invalidate on Canceled/DeadlineExceeded while that context is still live, which isolates the genuine stale-channel signal (a peer restart behind a k8s Service VIP). To carry the context, add a ctx parameter to the existing WithGrpcClient, WithMasterClient, and WithMasterServerClient; the master assign and volume-lookup paths pass their per-attempt context and every other caller passes context.Background(). |
||
|
Chris LuandGitHub
|
4bf27278fa |
topology: fail replica writes fast when a replica is unreachable (#9744)
* operation: bound upload retries and honor context cancellation retriedUploadData hardcoded 3 attempts and an uninterruptible backoff sleep. A synchronous replica write to a dead host therefore paid the full dial timeout three times over before failing. Add UploadOption.MaxAttempts (<=0 keeps the default of 3) so callers can cap attempts, and make the loop return as soon as the context is cancelled so an abandoned upload unwinds instead of retrying. * topology: fail replica writes fast when a replica is unreachable DistributedOperation already returns on the first error, but a single dead replica is itself the slow result: its goroutine retries the upload three times through the dial timeout (~30s) before any error surfaces, stalling the originating client write the whole time. Make the replica write a single attempt (MaxAttempts=1) so a dead replica fails after one dial timeout instead of three, and thread a context into DistributedOperation that is cancelled once the outcome is decided, so a healthy replica is no longer held hostage by one stalled in a dial. The originating client write is what retries. * topology: keep replica deletes off the client request context ReplicatedDelete runs after the local needle is already deleted. Driving the replica deletes off r.Context() means a client disconnect cancels them and orphans needles on the replicas, so use a background context. * operation, topology: trim comments on the replica fail-fast path |
||
|
Chris LuandGitHub
|
0716577ec8 |
fix(upload): rewind request body when retrying on connection reset (#9139) (#9222)
* fix(upload): rewind request body when retrying on connection reset (#9139) When httpClient.Do() returned "connection reset by peer" or "use of closed network connection", upload_content retried with the same *http.Request. But the body is a *bytes.Reader the first attempt already consumed, so the retry sent 0 bytes and Go's transport surfaced "http: ContentLength=N with Body length 0". http.NewRequestWithContext populates req.GetBody for *bytes.Reader bodies; use it to attach a fresh body before retrying. Reproduces the issue with a unit test (asserts both attempts see the same payload bytes); the test fails without the fix. * upload: skip inner retry when body cannot be rewound Per review feedback: if req.GetBody is nil or returns an error, the inner retry would call Do(req) with an already-consumed body and the "connection reset" error would be replaced by the misleading "ContentLength=N with Body length 0" — the very symptom this PR set out to fix. Skip the inner retry on rewind failure and let the outer retriedUploadData loop reissue with a fresh request, and log when GetBody is unavailable for observability. * upload: log the actual transport error in the inner retry log line Per review feedback: the diagnostic glog at the top of the inner retry branch was logging postErr — the request-construction error from http.NewRequestWithContext, which is necessarily nil there because the function returns early at line 423 if it isn't. Operators were seeing "<nil>" instead of the transient transport error that triggered the rewind. Reference post_err so the connection-reset / closed-connection cause is actually visible. |
||
 steve.weiandGitHub
|
1a7ab2ea82 |
fix(upload): keep Content-MD5 on 204 unchanged writes (#9198)
Return Content-MD5 in the volume unchanged-write response and read it in the uploader 204 path so multipart chunk ETag metadata is preserved. |
||
|
Chris LuandGitHub
|
0a5c22b57e |
chore(upload): log offset/bytes-read context on chunk ReadFrom errors (#9169)
chore(upload): add offset/bytes-read context to chunk ReadFrom errors Wrap io.ErrUnexpectedEOF (and siblings) from bytesBuffer.ReadFrom so the log shows "read chunk at offset N (got M bytes): ..." instead of a bare "unexpected EOF". The context distinguishes a client disconnect before any data arrived (offset=0, got=0) from a mid-stream truncation (offset>0, got<chunkSize) — diagnosing #9149 in the wild. Verified at this stage that expectedDataSize is already threaded correctly from upload_chunked.go (actual ReadFrom bytes) through s3api assignFunc → filer AssignVolume → master PickForWrite. No behavioral change to what the master receives. |
||
|
Chris LuandGitHub
|
00a2e22478 |
fix(mount): remove fid pool to stop master over-allocating volumes (#9111)
* fix(mount): remove fid pool to stop master over-allocating volumes
The writeback-cache fid pool pre-allocated file IDs with
ExpectedDataSize = ChunkSizeLimit (typically 8+ MB). The master's
PickForWrite charges count * expectedDataSize against the volume's
effectiveSize, so a full pool refill could charge hundreds of MB
against a single volume before any bytes were actually written.
That tripped RecordAssign's hard-limit path and eagerly removed
volumes from writable, causing the master to grow new volumes
even when the real data being written was tiny.
Drop the pool entirely. Every chunk upload goes through
UploadWithRetry -> AssignVolume with no ExpectedDataSize hint,
letting the master fall back to the 1 MB default estimate. The
mount->filer grpc connection is already cached in pb.WithGrpcClient
(non-streaming mode), so per-chunk AssignVolume is a unary RPC
over an existing HTTP/2 stream, not a full dial. Path-based
filer.conf storage rules now apply to mount chunk assigns again,
which the pool had to skip.
Also remove the now-unused operation.UploadWithAssignFunc and its
AssignFunc type.
* fix(upload): populate ExpectedDataSize from actual chunk bytes
UploadWithRetry already buffers the full chunk into `data` before
calling AssignVolume, so the real size is known. Previously the
assign request went out with ExpectedDataSize=0, making the master
fall back to the 1 MB DefaultNeedleSizeEstimate per fid — same
over-reservation symptom the pool had, just smaller per call.
Stamp ExpectedDataSize = len(data) before the assign RPC when the
caller hasn't already set it. This covers mount chunk uploads,
filer_copy, filersink, mq/logstore, broker_write, gateway_upload,
and nfs — all the UploadWithRetry paths.
* fix(assign): pass real ExpectedDataSize at every assign call site
After removing the mount fid pool, per-chunk AssignVolume calls went
out with ExpectedDataSize=0, making the master fall back to its 1 MB
DefaultNeedleSizeEstimate. That's still an over-estimate for small
writes. Thread the real payload size through every remaining assign
site so RecordAssign charges effectiveSize accurately and stops
prematurely marking volumes full.
- filer: assignNewFileInfo now takes expectedDataSize and stamps it
on both primary and alternate VolumeAssignRequests. Callers pass:
- SSE data-to-chunk: len(data)
- copy manifest save: len(data)
- streamCopyChunk: srcChunk.Size
- TUS sub-chunk: bytes read
- saveAsChunk (autochunk/manifestize): 0 (small, size unknown
until the reader is drained; master uses 1 MB default)
- filer gRPC remote fetch-and-write: ExpectedDataSize = chunkSize
after the adaptive chunkSize is computed.
- ChunkedUploadOption.AssignFunc gains an expectedDataSize parameter;
upload_chunked.go passes the buffered dataSize at the call site.
S3 PUT assignFunc stamps it on the AssignVolumeRequest.
- S3 copy: assignNewVolume / prepareChunkCopy take expectedDataSize;
all seven call sites pass the source chunk's Size.
- operation.SubmitFiles / FilePart.Upload: derive per-fid size from
FileSize (average for batched requests, real per-chunk size for
sequential chunk assigns).
- benchmark: pass fileSize.
- filer append-to-file: pass len(data).
* fix(assign): thread size through SaveDataAsChunkFunctionType
The saveAsChunk path (autochunk, filer_copy, webdav, mount) ran
AssignVolume before the reader was drained, so it had to pass
ExpectedDataSize=0 and fall back to the master's 1 MB default.
Add an expectedDataSize parameter to SaveDataAsChunkFunctionType.
- mergeIntoManifest already has the serialized manifest bytes, so
it passes uint64(len(data)) directly.
- Mount's saveDataAsChunk ignores the parameter because it uses
UploadWithRetry, which already stamps len(data) on the assign
after reading the payload.
- webdav and filer_copy saveDataAsChunk follow the same UploadWithRetry
path and also ignore the hint.
- Filer's saveAsChunk (used for manifestize) plumbs the value to
assignNewFileInfo so manifest-chunk assigns get a real size.
Callers of saveFunc-as-value (weedfs_file_sync, dirty_pages_chunked)
pass the chunk size they're about to upload.
|
||
|
Chris LuandGitHub
|
ff4f96c71f |
fix(filer): drop stale master gRPC cache on stream death (#9102) (#9107)
* fix(filer): drop stale master gRPC cache on stream death (#9102) When the master server restarts behind a stable L4 endpoint (e.g. a Kubernetes ClusterIP Service), the filer's streaming KeepConnected channel detects the disconnect and reconnects, but the shared request-path ClientConn cached in pb.grpcClients can remain in READY state while actually being dead. New AssignVolume/LookupVolume calls reuse that cached channel and return `rpc error: code = Canceled desc = context canceled` for every request, until the filer pod is restarted. - Expose pb.InvalidateGrpcConnection(address) to drop a cached ClientConn when a higher-level signal says it is stale. - In MasterClient.tryConnectToMaster, invalidate the cached request-path channel whenever the KeepConnected stream returns, so unrelated callers dial fresh on their next RPC. - Extend operation.Assign's retry predicate to cover Canceled and DeadlineExceeded while the caller context is still live: the first failure invalidates the stale ClientConn via shouldInvalidateConnection, and the retry dials a new channel. * fix(grpc): invalidate cached peer conn on streaming death in other paths Extends the master-client fix to the other streaming-caller + cached non-streaming-peer pairs that share the same stale-channel failure mode when the peer restarts behind a stable L4 endpoint (k8s Service VIP, external load balancer): - pb.FollowMetadata (s3, mount, webdav, mq broker, filer remote gateway, etc. → filer): invalidate the filer's cached ClientConn when the SubscribeMetadata stream returns an error. - filer.MetaAggregator.loopSubscribeToOneFiler (filer → peer filer): invalidate the peer's cached ClientConn after doSubscribeToOneFiler fails, so the next iteration's readFilerStoreSignature / updateOffset calls dial fresh. - mq sub_client.onEachPartition and doKeepConnectedToSubCoordinator (subscriber → broker): invalidate the broker's cached ClientConn when the SubscribeMessage / SubscriberToSubCoordinator stream errors. - mq broker.BrokerConnectToBalancer (broker → broker-balancer): invalidate the balancer's cached ClientConn after the PublisherToPubBalancer stream errors. * address review feedback on InvalidateGrpcConnection - pb.InvalidateGrpcConnection: drop the cache entry under grpcClientsLock but call ClientConn.Close() after releasing the lock, so Close's internal synchronisation/IO doesn't serialise unrelated callers on the global map lock. - wdclient.tryConnectToMaster: only invalidate the cached request-path channel when the streaming call returned an error. On a healthy leader redirect (gprcErr == nil) the cached channel is still usable and invalidating it just causes a needless re-dial from concurrent callers. * refactor(grpc): centralize peer-conn invalidation in streaming path Previously every streaming caller duplicated the same invalidate-cached- non-streaming-peer-conn wrapper around their WithGrpcClient(true, ...) call. Move that logic into WithGrpcClient itself: when the streaming fn returns an error, invalidate any cached ClientConn for the same address. This removes six near-identical call-site wrappers and gives every current and future streaming caller the fix by default. Also aligns the non-streaming branch with the new Invalidate helper's lock discipline: delete the cache entry under grpcClientsLock, then Close the ClientConn after releasing the lock. |
||
|
Chris LuandGitHub
|
e8a8449553 |
feat(mount): pre-allocate file IDs in pool for writeback cache mode (#9038)
* feat(mount): pre-allocate file IDs in pool for writeback cache mode When writeback caching is enabled, chunk uploads no longer block on a per-chunk AssignVolume RPC. Instead, a FileIdPool pre-allocates file IDs in batches using a single AssignVolume(Count=N, ExpectedDataSize=ChunkSize) call and hands them out instantly to upload workers. Pool size is 2x ConcurrentWriters, refilled in background when it drops below ConcurrentWriters. Entries expire after 25s to respect JWT TTL. Sequential needle keys are generated from the base file ID returned by the master, so one Assign RPC produces N usable IDs. This cuts per-chunk upload latency from 2 RTTs (assign + upload) to 1 RTT (upload only), with the assign cost amortized across the batch. * test: add benchmarks for file ID pool vs direct assign Benchmarks measure: - Pool Get vs Direct AssignVolume at various simulated latencies - Batch assign scaling (Count=1 through Count=32) - Concurrent pool access with 1-64 workers Results on Apple M4: - Pool Get: constant ~3ns regardless of assign latency - Batch=16: 15.7x more IDs/sec than individual assigns - 64 concurrent workers: 19M IDs/sec throughput * fix(mount): address review feedback on file ID pool 1. Fix race condition in Get(): use sync.Cond so callers wait for an in-flight refill instead of returning an error when the pool is empty. 2. Match default pool size to async flush worker count (128, not 16) when ConcurrentWriters is unset. 3. Add logging to UploadWithAssignFunc for consistency with UploadWithRetry. 4. Document that pooled assigns omit the Path field, bypassing path-based storage rules (filer.conf). This is an intentional tradeoff for writeback cache performance. 5. Fix flaky expiry test: widen time margin from 50ms to 1s. 6. Add TestFileIdPoolGetWaitsForRefill to verify concurrent waiters. * fix(mount): use individual Count=1 assigns to get per-fid JWTs The master generates one JWT per AssignResponse, bound to the base file ID (master_grpc_server_assign.go:158). The volume server validates that the JWT's Fid matches the upload exactly (volume_server_handlers.go:367). Using Count=N and deriving sequential IDs would fail this check. Switch to individual Count=1 RPCs over a single gRPC connection. This still amortizes connection overhead while getting a correct per-fid JWT for each entry. Partial batches are accepted if some requests fail. Remove unused needle import now that sequential ID generation is gone. * fix(mount): separate pprof from FUSE protocol debug logging The -debug flag was enabling both the pprof HTTP server and the noisy go-fuse protocol logging (rx/tx lines for every FUSE operation). This makes profiling impractical as the log output dominates. Split into two flags: - -debug: enables pprof HTTP server only (for profiling) - -debug.fuse: enables raw FUSE protocol request/response logging * perf(mount): replace LevelDB read+write with in-memory overlay for dir mtime Profile showed TouchDirMtimeCtime at 0.22s — every create/rename/unlink in a directory did a LevelDB FindEntry (read) + UpdateEntry (write) just to bump the parent dir's mtime/ctime. Replace with an in-memory map (same pattern as existing atime overlay): - touchDirMtimeCtimeLocal now stores inode→timestamp in dirMtimeMap - applyInMemoryDirMtime overlays onto GetAttr/Lookup output - No LevelDB I/O on the mutation hot path The overlay only advances timestamps forward (max of stored vs overlay), so stale entries are harmless. Map is bounded at 8192 entries. * perf(mount): skip self-originated metadata subscription events in writeback mode With writeback caching, this mount is the single writer. All local mutations are already applied to the local meta cache (via applyLocalMetadataEvent or direct InsertEntry). The filer subscription then delivers the same event back, causing redundant work: proto.Clone, enqueue to apply loop, dedup ring check, and sometimes redundant LevelDB writes when the dedup ring misses (deferred creates). Check EventNotification.Signatures against selfSignature and skip events that originated from this mount. This eliminates the redundant processing for every self-originated mutation. * perf(mount): increase kernel FUSE cache TTL in writeback cache mode With writeback caching, this mount is the single writer — the local meta cache is authoritative. Increase EntryValid and AttrValid from 1s to 10s so the kernel doesn't re-issue Lookup/GetAttr for every path component and stat call. This reduces FUSE /dev/fuse round-trips which dominate the profile at 38% of CPU (syscall.rawsyscalln). Each saved round-trip eliminates a kernel→userspace→kernel transition. Normal (non-writeback) mode retains the 1s TTL for multi-mount consistency. |
||
|
Chris LuandGitHub
|
10b0bdce02 |
feat: pass expected_data_size from clients for size-aware assignment (#9032)
* feat: pass expected_data_size from clients for size-aware assignment Add expected_data_size field to AssignRequest (master proto) and AssignVolumeRequest (filer proto) so clients can hint how large the data will be. The master uses this instead of the 1MB default when tracking pending volume sizes for weighted assignment. - Add expected_data_size to master.proto AssignRequest - Add expected_data_size to filer.proto AssignVolumeRequest - Wire through filer AssignVolume handler - Wire through HTTP submit handler (uses actual upload size) - Add ExpectedDataSize to VolumeAssignRequest in operation package - Topology.PickForWrite accepts optional expectedDataSize parameter * fix: guard integer conversions in expected_data_size path - common.go: clamp OriginalDataSize to non-negative before uint64 cast - topology.go: cap expectedDataSize at math.MaxInt64 before int64 cast * fix: parse dataSize hint in HTTP /dir/assign and test non-zero expectedDataSize - HTTP /dir/assign now parses optional "dataSize" query parameter and passes it to PickForWrite instead of hardcoded 0 - Add test assertion for PickForWrite with non-zero expectedDataSize |
||
|
Chris LuandGitHub
|
2919bb27e5 |
fix(sync): use per-cluster TLS for HTTP volume connections in filer.sync (#8974)
* fix(sync): use per-cluster TLS for HTTP volume connections in filer.sync (#8965) When filer.sync runs with -a.security and -b.security flags, only gRPC connections received per-cluster TLS configuration. HTTP clients for volume server reads and uploads used a global singleton with the default security.toml, causing TLS verification failures when clusters use different self-signed certificates. Load per-cluster HTTPS client config from the security files and pass dedicated HTTP clients to FilerSource (for downloads) and FilerSink (for uploads) so each direction uses the correct cluster's certificates. * fix(sync): address review feedback for per-cluster HTTP TLS - Add insecure_skip_verify support to NewHttpClientWithTLS and read it from per-cluster security config via https.client.insecure_skip_verify - Error on partial mTLS config (cert without key or vice versa) - Add nil-check for client parameter in DownloadFileWithClient - Document SetUploader as init-only (same pattern as SetChunkConcurrency) |
||
|
Chris LuandGitHub
|
995dfc4d5d |
chore: remove ~50k lines of unreachable dead code (#8913)
* chore: remove unreachable dead code across the codebase Remove ~50,000 lines of unreachable code identified by static analysis. Major removals: - weed/filer/redis_lua: entire unused Redis Lua filer store implementation - weed/wdclient/net2, resource_pool: unused connection/resource pool packages - weed/plugin/worker/lifecycle: unused lifecycle plugin worker - weed/s3api: unused S3 policy templates, presigned URL IAM, streaming copy, multipart IAM, key rotation, and various SSE helper functions - weed/mq/kafka: unused partition mapping, compression, schema, and protocol functions - weed/mq/offset: unused SQL storage and migration code - weed/worker: unused registry, task, and monitoring functions - weed/query: unused SQL engine, parquet scanner, and type functions - weed/shell: unused EC proportional rebalance functions - weed/storage/erasure_coding/distribution: unused distribution analysis functions - Individual unreachable functions removed from 150+ files across admin, credential, filer, iam, kms, mount, mq, operation, pb, s3api, server, shell, storage, topology, and util packages * fix(s3): reset shared memory store in IAM test to prevent flaky failure TestLoadIAMManagerFromConfig_EmptyConfigWithFallbackKey was flaky because the MemoryStore credential backend is a singleton registered via init(). Earlier tests that create anonymous identities pollute the shared store, causing LookupAnonymous() to unexpectedly return true. Fix by calling Reset() on the memory store before the test runs. * style: run gofmt on changed files * fix: restore KMS functions used by integration tests * fix(plugin): prevent panic on send to closed worker session channel The Plugin.sendToWorker method could panic with "send on closed channel" when a worker disconnected while a message was being sent. The race was between streamSession.close() closing the outgoing channel and sendToWorker writing to it concurrently. Add a done channel to streamSession that is closed before the outgoing channel, and check it in sendToWorker's select to safely detect closed sessions without panicking. |
||
|
Chris LuandGitHub
|
7d426d2a56 |
Retry uploader on volume full (#8853)
* retry uploader on volume full * drop unused upload retry helper |
||
|
Chris LuandGitHub
|
5fa5507234 |
Add Prometheus metric to count upload errors (#8788)
Add Prometheus metric to count upload errors (#8775) Add SeaweedFS_upload_error_total counter labeled by HTTP status code, so operators can alert on write/replication failures. Code "0" indicates a transport error (no HTTP response received). Also add an "Upload Errors" panel to the Grafana dashboard. |
||
|
Chris LuandGitHub
|
2ec0a67ee3 |
master: return 503/Unavailable during topology warmup after leader change (#8529)
* master: return 503/Unavailable during topology warmup after leader change After a master restart or leader change, the topology is empty until volume servers reconnect and send heartbeats. During this warmup window (3 heartbeat intervals = 15 seconds), volume lookups that fail now return 503 Service Unavailable (HTTP) or gRPC Unavailable instead of 404 Not Found, signaling clients to retry with other masters. * master: skip warmup 503 on fresh start and single-master setups - Check MaxVolumeId > 0 to distinguish restart from fresh start (MaxVolumeId is Raft-persisted, so 0 means no prior data) - Check peer count > 1 so single-master deployments aren't affected (no point suggesting "retry with other masters" if there are none) * master: address review feedback and block assigns during warmup - Protect LastLeaderChangeTime with dedicated mutex (fix data race) - Extract warmup multiplier as WarmupPulseMultiplier constant - Derive Retry-After header from pulse config instead of hardcoding - Only trigger warmup 503 for "not found" errors, not parse errors - Return nil response (not partial) on gRPC Unavailable - Add doc comments to IsWarmingUp, getter/setter, WarmupDuration - Block volume assign requests (HTTP and gRPC) during warmup, since the topology is incomplete and assignments would be unreliable - Skip warmup behavior for single-master setups (no peers to retry) * master: apply warmup to all setups, skip only on fresh start Single-master restarts still have an empty topology until heartbeats arrive, so warmup protection should apply there too. The only case to skip is a fresh cluster start (MaxVolumeId == 0), which already has no volumes to look up. - Remove GetMasterCount() > 1 guard from all warmup checks - Remove now-unused GetMasterCount helper - Update error messages to "topology is still loading" (not "retry with other masters" which doesn't apply to single-master) * master: add client-side retry on Unavailable for lookup and assign The server-side 503/Unavailable during warmup needs client cooperation. Previously, LookupVolumeIds and Assign would immediately propagate the error without retry. Now both paths retry with exponential backoff (1s -> 1.5s -> ... up to 6s) when receiving Unavailable, respecting context cancellation. This covers the warmup window where the master's topology is still loading after a restart or leader change. * master: seed warmup timestamp in legacy raft path at setup The legacy raft path only set lastLeaderChangeTime inside the event listener callback, which could fire after IsLeader() was already observed as true in SetRaftServer. Seed the timestamp at setup time (matching the hashicorp path) so IsWarmingUp() is active immediately. * master: fix assign retry loop to cover full warmup window The retry loop used waitTime <= maxWaitTime as a stop condition, causing it to give up after ~13s while warmup lasts 15s. Now cap each individual sleep at maxWaitTime but keep retrying until the context is cancelled. * master: preserve gRPC status in lookup retry and fix retry window Return the raw gRPC error instead of wrapping with fmt.Errorf so status.FromError() can extract the status code. Use proper gRPC status check (codes.Unavailable) instead of string matching. Also cap individual sleep at maxWaitTime while retrying until ctx is done. * master: use gRPC status code instead of string matching in assign retry Use status.FromError/codes.Unavailable instead of brittle strings.Contains for detecting retriable gRPC errors in the assign retry loop. * master: use remaining warmup duration for Retry-After header Set Retry-After to the remaining warmup time instead of the full warmup duration, so clients don't wait longer than necessary. * master: reset ret.Replicas before populating from assign response Clear Replicas slice before appending to prevent duplicate entries when the assign response is retried or when alternative requests are attempted. * master: add unit tests for warmup retry behavior Test that Assign() and LookupVolumeIds() retry on codes.Unavailable and stop promptly when the context is cancelled. * master: record leader change time before initialization work Move SetLastLeaderChangeTime() to fire immediately when the leader change event is received, before DoBarrier(), EnsureTopologyId(), and updatePeers(), so the warmup clock starts at the true moment of leadership transition. * master: use topology warmup duration in volume growth wait loop Replace hardcoded constants.VolumePulsePeriod * 2 with topo.IsWarmingUp() and topo.WarmupDuration() so the growth wait stays in sync with the configured warmup window. Remove unused constants import. * master: resolve master before creating RPC timeout context Move GetMaster() call before context.WithTimeout() so master resolution blocking doesn't consume the gRPC call timeout. * master: use NotFound flag instead of string matching for volume lookup Add a NotFound field to LookupResult and set it in findVolumeLocation when a volume is genuinely missing. Update HTTP and gRPC warmup checks to use this flag instead of strings.Contains on the error message. * master: bound assign retry loop to 30s for deadline-free contexts Without a context deadline, the Unavailable retry loop could spin forever. Add a maxRetryDuration of 30s so the loop gives up even when no context deadline is set. * master: strengthen assign retry cancellation test Verify the retry loop actually retried (callCount > 1) and that the returned error is context.DeadlineExceeded, not just any error. * master: extract shared retry-with-backoff utility Add util.RetryWithBackoff for context-aware, bounded retry with exponential backoff. Refactor both Assign() and LookupVolumeIds() to use it instead of duplicating the retry/sleep/backoff logic. * master: cap waitTime in RetryWithBackoff to prevent unbounded growth Cap the backoff waitTime at maxWaitTime so it doesn't grow indefinitely in long-running retry scenarios. * master: only return Unavailable during warmup when all lookups failed For batched LookupVolume requests, return partial results when some volumes are found. Only return codes.Unavailable when no volumes were successfully resolved, so clients benefit from partial results instead of retrying unnecessarily. * master: set retriable error message in 503 response body When returning 503 during warmup, replace the "not found" error in the JSON body with "service warming up, please retry" so clients don't treat it as a permanent error. * master: guard empty master address in LookupVolumeIds If GetMaster() returns empty (no master found or ctx cancelled), return an appropriate error instead of dialing an empty address. Returns ctx.Err() if context is done, otherwise codes.Unavailable to trigger retry. * master: add comprehensive tests for RetryWithBackoff Test success after retries, non-retryable error handling, context cancellation, and maxDuration cap with context.Background(). * master: enforce hard maxDuration bound in RetryWithBackoff Use a deadline instead of elapsed-time check so the last sleep is capped to remaining time. This prevents the total retry duration from overshooting maxDuration by up to one full backoff interval. * master: respect fresh-start bypass in RemainingWarmupDuration Check IsWarmingUp() first (which returns false when MaxVolumeId==0) so RemainingWarmupDuration returns 0 on fresh clusters. * master: round up Retry-After seconds to avoid underestimating Use math.Ceil so fractional remaining seconds (e.g. 1.9s) round up to the next integer (2) instead of flooring down (1). * master: tighten batch lookup warmup to all-NotFound only Only return codes.Unavailable when every requested volume ID was a transient not-found. Mixed cases with non-NotFound errors now return the response with per-volume error details preserved. * master: reduce retry log noise and fix timer leak Lower per-attempt retry log from V(0) to V(1) to reduce noise during warmup. Replace time.After with time.NewTimer to avoid lingering timers when context is cancelled. * master: add per-attempt timeout for assign RPC Use a 10s per-attempt timeout so a single slow RPC can't consume the entire 30s retry budget when ctx has no deadline. * master: share single 30s retry deadline across assign request entries The Assign() function iterates over primary and fallback requests, previously giving each its own 30s RetryWithBackoff budget. With a primary + fallback, the total could reach 60s. Compute one deadline up front and pass the remaining budget to each RetryWithBackoff call so the entire Assign() call stays within a single 30s cap. * master: strengthen context-cancel test with DeadlineExceeded and retry assertions Assert errors.Is(err, context.DeadlineExceeded) to verify the error is specifically from the context deadline, and check callCount > 1 to prove retries actually occurred before cancellation. Mirrors the pattern used in TestAssignStopsOnContextCancel. * master: bound GetMaster with per-attempt timeout in LookupVolumeIds GetMaster() calls WaitUntilConnected() which can block indefinitely if no master is available. Previously it used the outer ctx, so a slow master resolution could consume the entire RetryWithBackoff budget in a single attempt. Move the per-attempt timeoutCtx creation before the GetMaster call so both master resolution and the gRPC LookupVolume RPC share one grpcTimeout-bounded attempt. * master: use deadline-aware context for assign retry budget The shared 30s deadline only limited RetryWithBackoff's internal wall-clock tracking, but per-attempt contexts were still derived from the original ctx and could run for up to 10s even when the budget was nearly exhausted. Create a deadlineCtx from the computed deadline and derive both RetryWithBackoff and per-attempt timeouts from it so all operations honor the shared 30s cap. * master: skip warmup gate for empty lookup requests When VolumeOrFileIds is empty, notFoundCount == len(req.VolumeOrFileIds) is 0 == 0 which is true, causing empty lookup batches during warmup to return codes.Unavailable and be retried endlessly. Add a len(req.VolumeOrFileIds) > 0 guard so empty requests pass through. * master: validate request fields before warmup gate in Assign Move Replication and Ttl parsing before the IsWarmingUp() check so invalid inputs get a proper validation error instead of being masked by codes.Unavailable during warmup. Pure syntactic validation does not depend on topology state and should run first. * master: check deadline and context before starting retry attempt RetryWithBackoff only checked the deadline and context after an attempt completed or during the sleep select. If the deadline expired or context was canceled during sleep, the next iteration would still call operation() before detecting it. Add pre-operation checks so no new attempt starts after the budget is exhausted. * master: always return ctx.Err() on context cancellation in RetryWithBackoff When ctx.Err() is non-nil, the pre-operation check was returning lastErr instead of ctx.Err(). This broke callers checking errors.Is(err, context.DeadlineExceeded) and contradicted the documented contract. Always return ctx.Err() so the cancellation reason is properly surfaced. * master: handle warmup errors in StreamAssign without killing the stream StreamAssign was returning codes.Unavailable errors from Assign directly, which terminates the gRPC stream and breaks pooled connections. Instead, return transient errors as in-band error responses so the stream survives warmup periods. Also reset assignClient in doAssign on Send/Recv failures so a broken stream doesn't leave the proxy permanently dead. * master: wait for warmup before slot search in findAndGrow findEmptySlotsForOneVolume was called before the warmup wait loop, selecting slots from an incomplete topology. Move the warmup wait before slot search so volume placement uses the fully warmed-up topology with all servers registered. * master: add Retry-After header to /dir/assign warmup response The /dir/lookup handler already sets Retry-After during warmup but /dir/assign did not, leaving HTTP clients without guidance on when to retry. Add the same header using RemainingWarmupDuration(). * master: only seed warmup timestamp on leader at startup SetLastLeaderChangeTime was called unconditionally for both leader and follower nodes. Followers don't need warmup state, and the leader change event listener handles real elections. Move the seed into the IsLeader() block so only the startup leader gets warmup initialized. * master: preserve codes.Unavailable for StreamAssign warmup errors in doAssign StreamAssign returns transient warmup errors as in-band AssignResponse.Error messages. doAssign was converting these to plain fmt.Errorf, losing the codes.Unavailable classification needed for the caller's retry logic. Detect warmup error messages and wrap them as status.Error(codes.Unavailable) so RetryWithBackoff can retry. |
||
|
0647f66bb5 |
filer.sync: add exponential backoff on unexpected EOF during replication (#8557)
* filer.sync: add exponential backoff on unexpected EOF during replication When the source volume server drops connections under high traffic, filer.sync retries aggressively (every 1-6s), hammering the already overloaded source. This adds a longer exponential backoff (10s to 2min) specifically for "unexpected EOF" errors, reducing pressure on the source while still retrying indefinitely until success. Also adds more logging throughout the replication path: - Log source URL and error at V(0) when ReadPart or io.ReadAll fails - Log content-length and byte counts at V(4) on success - Log backoff duration in retry messages Fixes #8542 * filer.sync: extract backoff helper and fix 2-minute cap - Extract nextEofBackoff() and isEofError() helpers to deduplicate the backoff logic between fetchAndWrite and uploadManifestChunk - Fix the cap: previously 80s would double to 160s and pass the < 2min check uncapped. Now doubles first, then clamps to 2min. * filer.sync: log source URL instead of empty upload URL on read errors UploadUrl is not populated until after the reader is consumed, so the V(0) and V(4) logs were printing an empty string. Add SourceUrl field to UploadOption and populate it from the HTTP response in fetchAndWrite. * filer.sync: guard isEofError against nil error * filer.sync: use errors.Is for EOF detection, fix log wording - Replace broad substring matching ("read input", "unexpected EOF") with errors.Is(err, io.ErrUnexpectedEOF) and errors.Is(err, io.EOF) so only actual EOF errors trigger the longer backoff - Fix awkward log phrasing: "interrupted replicate" → "interrupted while replicating" * filer.sync: remove EOF backoff from uploadManifestChunk uploadManifestChunk reads from an in-memory bytes.Reader, so any EOF errors there are from the destination side, not a broken source stream. The long source-oriented backoff is inappropriate; let RetryUntil handle destination retries at its normal cadence. --------- Co-authored-by: Copilot <copilot@github.com> |
||
|
Chris LuandGitHub
|
be0379f6fd |
Fix filer.sync retry on stale chunk (#8298)
* Fix filer.sync stale chunk uploads * Tweak filersink stale logging |
||
|
Chris LuandGitHub
|
59b02e0cba |
s3api: fix multipart Complete ETag matching and lower empty-upload log noise (#8264)
s3api: fix multipart part etag validation and reduce empty upload warning noise |
||
|
Chris LuandGitHub
|
c284e51d20 |
fix: multipart upload ETag calculation (#8238)
* fix multipart etag * address comments * clean up * clean up * optimization * address comments * unquoted etag * dedup * upgrade * clean * etag * return quoted tag * quoted etag * debug * s3api: unify ETag retrieval and quoting across handlers Refactor newListEntry to take *S3ApiServer and use getObjectETag, and update setResponseHeaders to use the same logic. This ensures consistent ETags are returned for both listing and direct access. * s3api: implement ListObjects deduplication for versioned buckets Handle duplicate entries between the main path and the .versions directory by prioritizing the latest version when bucket versioning is enabled. * s3api: cleanup stale main file entries during versioned uploads Add explicit deletion of pre-existing "main" files when creating new versions in versioned buckets. This prevents stale entries from appearing in bucket listings and ensures consistency. * s3api: fix cleanup code placement in versioned uploads Correct the placement of rm calls in completeMultipartUpload and putVersionedObject to ensure stale main files are properly deleted during versioned uploads. * s3api: improve getObjectETag fallback for empty ExtETagKey Ensure that when ExtETagKey exists but contains an empty value, the function falls through to MD5/chunk-based calculation instead of returning an empty string. * s3api: fix test files for new newListEntry signature Update test files to use the new newListEntry signature where the first parameter is *S3ApiServer. Created mockS3ApiServer to properly test owner display name lookup functionality. * s3api: use filer.ETag for consistent Md5 handling in getEtagFromEntry Change getEtagFromEntry fallback to use filer.ETag(entry) instead of filer.ETagChunks to ensure legacy entries with Attributes.Md5 are handled consistently with the rest of the codebase. * s3api: optimize list logic and fix conditional header logging - Hoist bucket versioning check out of per-entry callback to avoid repeated getVersioningState calls - Extract appendOrDedup helper function to eliminate duplicate dedup/append logic across multiple code paths - Change If-Match mismatch logging from glog.Errorf to glog.V(3).Infof and remove DEBUG prefix for consistency * s3api: fix test mock to properly initialize IAM accounts Fixed nil pointer dereference in TestNewListEntryOwnerDisplayName by directly initializing the IdentityAccessManagement.accounts map in the test setup. This ensures newListEntry can properly look up account display names without panicking. * cleanup * s3api: remove premature main file cleanup in versioned uploads Removed incorrect cleanup logic that was deleting main files during versioned uploads. This was causing test failures because it deleted objects that should have been preserved as null versions when versioning was first enabled. The deduplication logic in listing is sufficient to handle duplicate entries without deleting files during upload. * s3api: add empty-value guard to getEtagFromEntry Added the same empty-value guard used in getObjectETag to prevent returning quoted empty strings. When ExtETagKey exists but is empty, the function now falls through to filer.ETag calculation instead of returning "". * s3api: fix listing of directory key objects with matching prefix Revert prefix handling logic to use strings.TrimPrefix instead of checking HasPrefix with empty string result. This ensures that when a directory key object exactly matches the prefix (e.g. prefix="dir/", object="dir/"), it is correctly handled as a regular entry instead of being skipped or incorrectly processed as a common prefix. Also fixed missing variable definition. * s3api: refactor list inline dedup to use appendOrDedup helper Refactored the inline deduplication logic in listFilerEntries to use the shared appendOrDedup helper function. This ensures consistent behavior and reduces code duplication. * test: fix port allocation race in s3tables integration test Updated startMiniCluster to find all required ports simultaneously using findAvailablePorts instead of sequentially. This prevents race conditions where the OS reallocates a port that was just released, causing multiple services (e.g. Filer and Volume) to be assigned the same port and fail to start. |
||
|
Chris LuandGitHub
|
c52d3d1229 |
fix: correct chunk size in encrypted uploads (fixes #8151) (#8154)
* fix: correct chunk size in encrypted uploads When uploading with encryption enabled (-encryptVolumeData flag), the chunk metadata was incorrectly storing the encrypted data size instead of the original uncompressed size. This caused data corruption when reading files back because: 1. Encrypted data is larger than original data 2. After decryption and decompression, the actual data is smaller 3. Size validation in readEncryptedUrl would fail 4. Files appeared truncated with null bytes The fix ensures uploadResult.Size uses clearDataLen (the original uncompressed size) in both cipher and non-cipher code paths, matching the expected behavior. Fixes: #8151 * test: add comprehensive tests for encrypted upload size fix Add unit tests to verify that encrypted uploads correctly store the original uncompressed data size, not the encrypted size. Tests cover: - Cipher key generation and encryption/decryption roundtrip - Compression + encryption roundtrip with size preservation - Different data sizes - Compression detection and effectiveness - Size behavior demonstration showing the bug and fix All tests verify that metadata stores the original size (19 bytes in the key example) not the encrypted size (75 bytes), which is critical for preventing data corruption on read operations. Issue: #8151 * remove emojis * Update upload_content_test.go * Delete upload_content_test.go |
||
|
9012069bd7 |
chore: execute goimports to format the code (#7983)
* chore: execute goimports to format the code Signed-off-by: promalert <promalert@outlook.com> * goimports -w . --------- Signed-off-by: promalert <promalert@outlook.com> Co-authored-by: Chris Lu <chris.lu@gmail.com> |
||
|
Chris LuandGitHub
|
8d6bcddf60 |
Add S3 volume encryption support with -s3.encryptVolumeData flag (#7890)
* Add S3 volume encryption support with -s3.encryptVolumeData flag
This change adds volume-level encryption support for S3 uploads, similar
to the existing -filer.encryptVolumeData option. Each chunk is encrypted
with its own auto-generated CipherKey when the flag is enabled.
Changes:
- Add -s3.encryptVolumeData flag to weed s3, weed server, and weed mini
- Wire Cipher option through S3ApiServer and ChunkedUploadOption
- Add integration tests for multi-chunk range reads with encryption
- Tests verify encryption works across chunk boundaries
Usage:
weed s3 -encryptVolumeData
weed server -s3 -s3.encryptVolumeData
weed mini -s3.encryptVolumeData
Integration tests:
go test -v -tags=integration -timeout 5m ./test/s3/sse/...
* Add GitHub Actions CI for S3 volume encryption tests
- Add test-volume-encryption target to Makefile that starts server with -s3.encryptVolumeData
- Add s3-volume-encryption job to GitHub Actions workflow
- Tests run with integration build tag and 10m timeout
- Server logs uploaded on failure for debugging
* Fix S3 client credentials to use environment variables
The test was using hardcoded credentials "any"/"any" but the Makefile
sets AWS_ACCESS_KEY_ID/AWS_SECRET_ACCESS_KEY to "some_access_key1"/
"some_secret_key1". Updated getS3Client() to read from environment
variables with fallback to "any"/"any" for manual testing.
* Change bucket creation errors from skip to fatal
Tests should fail, not skip, when bucket creation fails. This ensures
that credential mismatches and other configuration issues are caught
rather than silently skipped.
* Make copy and multipart test jobs fail instead of succeed
Changed exit 0 to exit 1 for s3-sse-copy-operations and s3-sse-multipart
jobs. These jobs document known limitations but should fail to ensure
the issues are tracked and addressed, not silently ignored.
* Hardcode S3 credentials to match Makefile
Changed from environment variables to hardcoded credentials
"some_access_key1"/"some_secret_key1" to match the Makefile
configuration. This ensures tests work reliably.
* fix Double Encryption
* fix Chunk Size Mismatch
* Added IsCompressed
* is gzipped
* fix copying
* only perform HEAD request when len(cipherKey) > 0
* Revert "Make copy and multipart test jobs fail instead of succeed"
This reverts commit
|
||
|
Chris LuandGitHub
|
ae7333d28e |
fix: cache successful volume lookups instead of failed ones (#7698)
The condition was inverted - it was caching lookups with errors instead of successful lookups. This caused every replicated write to make a gRPC call to master for volume location lookup, resulting in ~1 second latency for writeToReplicas. The bug particularly affected TTL volumes because: - More unique volumes are created (separate pools per TTL) - Volumes expire and get recreated frequently - Each new volume requires a fresh lookup (cache miss) - Higher volume churn = more cache misses = more master lookups With this fix, successful lookups are cached for 10 minutes, reducing replication latency from ~1s to ~10ms for cached volumes. |
||
|
Chris LuandGitHub
|
89b6deaefa |
fix: Use mime.FormatMediaType for RFC 6266 compliant Content-Disposition (#7635)
Updated Content-Disposition header generation to use mime.FormatMediaType from the standard library, which properly handles non-ASCII characters and special characters per RFC 6266. Changes: - weed/server/common.go: Updated adjustHeaderContentDisposition to use mime.FormatMediaType instead of manual escaping with fileNameEscaper - weed/operation/upload_content.go: Updated multipart form Content-Disposition to use mime.FormatMediaType - weed/server/volume_server_handlers_read.go: Removed unused fileNameEscaper This ensures correct filename display for international users across filer downloads and file uploads. Fixes #7634 |
||
|
Chris LuandGitHub
|
7e4bab8032 |
filer write request use context without cancellation (#7567)
* filer use context without cancellation * pass along context |
||
|
|
ca84a8a713 |
S3: Directly read write volume servers (#7481)
* Lazy Versioning Check, Conditional SSE Entry Fetch, HEAD Request Optimization * revert Reverted the conditional versioning check to always check versioning status Reverted the conditional SSE entry fetch to always fetch entry metadata Reverted the conditional versioning check to always check versioning status Reverted the conditional SSE entry fetch to always fetch entry metadata * Lazy Entry Fetch for SSE, Skip Conditional Header Check * SSE-KMS headers are present, this is not an SSE-C request (mutually exclusive) * SSE-C is mutually exclusive with SSE-S3 and SSE-KMS * refactor * Removed Premature Mutual Exclusivity Check * check for the presence of the X-Amz-Server-Side-Encryption header * not used * fmt * directly read write volume servers * HTTP Range Request Support * set header * md5 * copy object * fix sse * fmt * implement sse * sse continue * fixed the suffix range bug (bytes=-N for "last N bytes") * debug logs * Missing PartsCount Header * profiling * url encoding * test_multipart_get_part * headers * debug * adjust log level * handle part number * Update s3api_object_handlers.go * nil safety * set ModifiedTsNs * remove * nil check * fix sse header * same logic as filer * decode values * decode ivBase64 * s3: Fix SSE decryption JWT authentication and streaming errors Critical fix for SSE (Server-Side Encryption) test failures: 1. **JWT Authentication Bug** (Root Cause): - Changed from GenJwtForFilerServer to GenJwtForVolumeServer - S3 API now uses correct JWT when directly reading from volume servers - Matches filer's authentication pattern for direct volume access - Fixes 'unexpected EOF' and 500 errors in SSE tests 2. **Streaming Error Handling**: - Added error propagation in getEncryptedStreamFromVolumes goroutine - Use CloseWithError() to properly communicate stream failures - Added debug logging for streaming errors 3. **Response Header Timing**: - Removed premature WriteHeader(http.StatusOK) call - Let Go's http package write status automatically on first write - Prevents header lock when errors occur during streaming 4. **Enhanced SSE Decryption Debugging**: - Added IV/Key validation and logging for SSE-C, SSE-KMS, SSE-S3 - Better error messages for missing or invalid encryption metadata - Added glog.V(2) debugging for decryption setup This fixes SSE integration test failures where encrypted objects could not be retrieved due to volume server authentication failures. The JWT bug was causing volume servers to reject requests, resulting in truncated/empty streams (EOF) or internal errors. * s3: Fix SSE multipart upload metadata preservation Critical fix for SSE multipart upload test failures (SSE-C and SSE-KMS): **Root Cause - Incomplete SSE Metadata Copying**: The old code only tried to copy 'SeaweedFSSSEKMSKey' from the first part to the completed object. This had TWO bugs: 1. **Wrong Constant Name** (Key Mismatch Bug): - Storage uses: SeaweedFSSSEKMSKeyHeader = 'X-SeaweedFS-SSE-KMS-Key' - Old code read: SeaweedFSSSEKMSKey = 'x-seaweedfs-sse-kms-key' - Result: SSE-KMS metadata was NEVER copied → 500 errors 2. **Missing SSE-C and SSE-S3 Headers**: - SSE-C requires: IV, Algorithm, KeyMD5 - SSE-S3 requires: encrypted key data + standard headers - Old code: copied nothing for SSE-C/SSE-S3 → decryption failures **Fix - Complete SSE Header Preservation**: Now copies ALL SSE headers from first part to completed object: - SSE-C: SeaweedFSSSEIV, CustomerAlgorithm, CustomerKeyMD5 - SSE-KMS: SeaweedFSSSEKMSKeyHeader, AwsKmsKeyId, ServerSideEncryption - SSE-S3: SeaweedFSSSES3Key, ServerSideEncryption Applied consistently to all 3 code paths: 1. Versioned buckets (creates version file) 2. Suspended versioning (creates main object with null versionId) 3. Non-versioned buckets (creates main object) **Why This Is Correct**: The headers copied EXACTLY match what putToFiler stores during part upload (lines 496-521 in s3api_object_handlers_put.go). This ensures detectPrimarySSEType() can correctly identify encrypted multipart objects and trigger inline decryption with proper metadata. Fixes: TestSSEMultipartUploadIntegration (SSE-C and SSE-KMS subtests) * s3: Add debug logging for versioning state diagnosis Temporary debug logging to diagnose test_versioning_obj_plain_null_version_overwrite_suspended failure. Added glog.V(0) logging to show: 1. setBucketVersioningStatus: when versioning status is changed 2. PutObjectHandler: what versioning state is detected (Enabled/Suspended/none) 3. PutObjectHandler: which code path is taken (putVersionedObject vs putSuspendedVersioningObject) This will help identify if: - The versioning status is being set correctly in bucket config - The cache is returning stale/incorrect versioning state - The switch statement is correctly routing to suspended vs enabled handlers * s3: Enhanced versioning state tracing for suspended versioning diagnosis Added comprehensive logging across the entire versioning state flow: PutBucketVersioningHandler: - Log requested status (Enabled/Suspended) - Log when calling setBucketVersioningStatus - Log success/failure of status change setBucketVersioningStatus: - Log bucket and status being set - Log when config is updated - Log completion with error code updateBucketConfig: - Log versioning state being written to cache - Immediate cache verification after Set - Log if cache verification fails getVersioningState: - Log bucket name and state being returned - Log if object lock forces VersioningEnabled - Log errors This will reveal: 1. If PutBucketVersioning(Suspended) is reaching the handler 2. If the cache update succeeds 3. What state getVersioningState returns during PUT 4. Any cache consistency issues Expected to show why bucket still reports 'Enabled' after 'Suspended' call. * s3: Add SSE chunk detection debugging for multipart uploads Added comprehensive logging to diagnose why TestSSEMultipartUploadIntegration fails: detectPrimarySSEType now logs: 1. Total chunk count and extended header count 2. All extended headers with 'sse'/'SSE'/'encryption' in the name 3. For each chunk: index, SseType, and whether it has metadata 4. Final SSE type counts (SSE-C, SSE-KMS, SSE-S3) This will reveal if: - Chunks are missing SSE metadata after multipart completion - Extended headers are copied correctly from first part - The SSE detection logic is working correctly Expected to show if chunks have SseType=0 (none) or proper SSE types set. * s3: Trace SSE chunk metadata through multipart completion and retrieval Added end-to-end logging to track SSE chunk metadata lifecycle: **During Multipart Completion (filer_multipart.go)**: 1. Log finalParts chunks BEFORE mkFile - shows SseType and metadata 2. Log versionEntry.Chunks INSIDE mkFile callback - shows if mkFile preserves SSE info 3. Log success after mkFile completes **During GET Retrieval (s3api_object_handlers.go)**: 1. Log retrieved entry chunks - shows SseType and metadata after retrieval 2. Log detected SSE type result This will reveal at which point SSE chunk metadata is lost: - If finalParts have SSE metadata but versionEntry.Chunks don't → mkFile bug - If versionEntry.Chunks have SSE metadata but retrieved chunks don't → storage/retrieval bug - If chunks never have SSE metadata → multipart completion SSE processing bug Expected to show chunks with SseType=NONE during retrieval even though they were created with proper SseType during multipart completion. * s3: Fix SSE-C multipart IV base64 decoding bug **Critical Bug Found**: SSE-C multipart uploads were failing because: Root Cause: - entry.Extended[SeaweedFSSSEIV] stores base64-encoded IV (24 bytes for 16-byte IV) - SerializeSSECMetadata expects raw IV bytes (16 bytes) - During multipart completion, we were passing base64 IV directly → serialization error Error Message: "Failed to serialize SSE-C metadata for chunk in part X: invalid IV length: expected 16 bytes, got 24" Fix: - Base64-decode IV before passing to SerializeSSECMetadata - Added error handling for decode failures Impact: - SSE-C multipart uploads will now correctly serialize chunk metadata - Chunks will have proper SSE metadata for decryption during GET This fixes the SSE-C subtest of TestSSEMultipartUploadIntegration. SSE-KMS still has a separate issue (error code 23) being investigated. * fixes * kms sse * handle retry if not found in .versions folder and should read the normal object * quick check (no retries) to see if the .versions/ directory exists * skip retry if object is not found * explicit update to avoid sync delay * fix map update lock * Remove fmt.Printf debug statements * Fix SSE-KMS multipart base IV fallback to fail instead of regenerating * fmt * Fix ACL grants storage logic * header handling * nil handling * range read for sse content * test range requests for sse objects * fmt * unused code * upload in chunks * header case * fix url * bucket policy error vs bucket not found * jwt handling * fmt * jwt in request header * Optimize Case-Insensitive Prefix Check * dead code * Eliminated Unnecessary Stream Prefetch for Multipart SSE * range sse * sse * refactor * context * fmt * fix type * fix SSE-C IV Mismatch * Fix Headers Being Set After WriteHeader * fix url parsing * propergate sse headers * multipart sse-s3 * aws sig v4 authen * sse kms * set content range * better errors * Update s3api_object_handlers_copy.go * Update s3api_object_handlers.go * Update s3api_object_handlers.go * avoid magic number * clean up * Update s3api_bucket_policy_handlers.go * fix url parsing * context * data and metadata both use background context * adjust the offset * SSE Range Request IV Calculation * adjust logs * IV relative to offset in each part, not the whole file * collect logs * offset * fix offset * fix url * logs * variable * jwt * Multipart ETag semantics: conditionally set object-level Md5 for single-chunk uploads only. * sse * adjust IV and offset * multipart boundaries * ensures PUT and GET operations return consistent ETags * Metadata Header Case * CommonPrefixes Sorting with URL Encoding * always sort * remove the extra PathUnescape call * fix the multipart get part ETag * the FileChunk is created without setting ModifiedTsNs * Sort CommonPrefixes lexicographically to match AWS S3 behavior * set md5 for multipart uploads * prevents any potential data loss or corruption in the small-file inline storage path * compiles correctly * decryptedReader will now be properly closed after use * Fixed URL encoding and sort order for CommonPrefixes * Update s3api_object_handlers_list.go * SSE-x Chunk View Decryption * Different IV offset calculations for single-part vs multipart objects * still too verbose in logs * less logs * ensure correct conversion * fix listing * nil check * minor fixes * nil check * single character delimiter * optimize * range on empty object or zero-length * correct IV based on its position within that part, not its position in the entire object * adjust offset * offset Fetch FULL encrypted chunk (not just the range) Adjust IV by PartOffset/ChunkOffset only Decrypt full chunk Skip in the DECRYPTED stream to reach OffsetInChunk * look breaking * refactor * error on no content * handle intra-block byte skipping * Incomplete HTTP Response Error Handling * multipart SSE * Update s3api_object_handlers.go * address comments * less logs * handling directory * Optimized rejectDirectoryObjectWithoutSlash() to avoid unnecessary lookups * Revert "handling directory" This reverts commit 3a335f0ac33c63f51975abc63c40e5328857a74b. * constant * Consolidate nil entry checks in GetObjectHandler * add range tests * Consolidate redundant nil entry checks in HeadObjectHandler * adjust logs * SSE type * large files * large files Reverted the plain-object range test * ErrNoEncryptionConfig * Fixed SSERangeReader Infinite Loop Vulnerability * Fixed SSE-KMS Multipart ChunkReader HTTP Body Leak * handle empty directory in S3, added PyArrow tests * purge unused code * Update s3_parquet_test.py * Update requirements.txt * According to S3 specifications, when both partNumber and Range are present, the Range should apply within the selected part's boundaries, not to the full object. * handle errors * errors after writing header * https * fix: Wait for volume assignment readiness before running Parquet tests The test-implicit-dir-with-server test was failing with an Internal Error because volume assignment was not ready when tests started. This fix adds a check that attempts a volume assignment and waits for it to succeed before proceeding with tests. This ensures that: 1. Volume servers are registered with the master 2. Volume growth is triggered if needed 3. The system can successfully assign volumes for writes Fixes the timeout issue where boto3 would retry 4 times and fail with 'We encountered an internal error, please try again.' * sse tests * store derived IV * fix: Clean up gRPC ports between tests to prevent port conflicts The second test (test-implicit-dir-with-server) was failing because the volume server's gRPC port (18080 = VOLUME_PORT + 10000) was still in use from the first test. The cleanup code only killed HTTP port processes, not gRPC port processes. Added cleanup for gRPC ports in all stop targets: - Master gRPC: MASTER_PORT + 10000 (19333) - Volume gRPC: VOLUME_PORT + 10000 (18080) - Filer gRPC: FILER_PORT + 10000 (18888) This ensures clean state between test runs in CI. * add import * address comments * docs: Add placeholder documentation files for Parquet test suite Added three missing documentation files referenced in test/s3/parquet/README.md: 1. TEST_COVERAGE.md - Documents 43 total test cases (17 Go unit tests, 6 Python integration tests, 20 Python end-to-end tests) 2. FINAL_ROOT_CAUSE_ANALYSIS.md - Explains the s3fs compatibility issue with PyArrow, the implicit directory problem, and how the fix works 3. MINIO_DIRECTORY_HANDLING.md - Compares MinIO's directory handling approach with SeaweedFS's implementation Each file contains: - Title and overview - Key technical details relevant to the topic - TODO sections for future expansion These placeholder files resolve the broken README links and provide structure for future detailed documentation. * clean up if metadata operation failed * Update s3_parquet_test.py * clean up * Update Makefile * Update s3_parquet_test.py * Update Makefile * Handle ivSkip for non-block-aligned offsets * Update README.md * stop volume server faster * stop volume server in 1 second * different IV for each chunk in SSE-S3 and SSE-KMS * clean up if fails * testing upload * error propagation * fmt * simplify * fix copying * less logs * endian * Added marshaling error handling * handling invalid ranges * error handling for adding to log buffer * fix logging * avoid returning too quickly and ensure proper cleaning up * Activity Tracking for Disk Reads * Cleanup Unused Parameters * Activity Tracking for Kafka Publishers * Proper Test Error Reporting * refactoring * less logs * less logs * go fmt * guard it with if entry.Attributes.TtlSec > 0 to match the pattern used elsewhere. * Handle bucket-default encryption config errors explicitly for multipart * consistent activity tracking * obsolete code for s3 on filer read/write handlers * Update weed/s3api/s3api_object_handlers_list.go Co-authored-by: gemini-code-assist[bot] <176961590+gemini-code-assist[bot]@users.noreply.github.com> --------- Co-authored-by: gemini-code-assist[bot] <176961590+gemini-code-assist[bot]@users.noreply.github.com> |