mirror of
https://github.com/seaweedfs/seaweedfs.git
synced 2026-08-21 06:36:54 +00:00
* pb: carry a volume digest on the heartbeat The full volume list is the only way a master notices a volume that vanished without a delta, so it cannot simply be dropped. A digest gives the same guarantee without the list, and a way back to the list when they disagree. The digest has explicit presence: a server holding no volumes reports 0, which has to stay distinguishable from a server that does not compute one at all. * volume: report a digest of the volumes each heartbeat carries Digests exactly what goes on the wire: volumes skipped as quarantined, phantom or expired are absent from both the list and the digest, so the master compares against the same set the server meant to report. Runs the master's own hash over the master's own conversion of the message, so the two ends cannot drift into disagreeing about a field. * master: check the reported volume digest and ask for the list on a mismatch Compared after everything the heartbeat carried has been applied, so agreement means the master is current rather than that nothing changed. Servers reporting no digest are untouched, and a mismatch on a heartbeat that already carried the full list is reported rather than answered: there is nothing further to ask for, so asking again would loop. Nodes reporting one volume id twice are skipped for the same reason. * rust: report the heartbeat volume digest Mirrors the Go volume server. The master compares this against a digest it computes itself, so the hash has to agree byte for byte across the two implementations, not merely be a hash of the same fields: report_hash_vectors pins it against values generated by the Go side, and the ttl and replica placement narrowing the master applies when it decodes a message is applied here too rather than assumed away. A drift there would not corrupt anything, but every volume server on this implementation would report a digest the master can never match and fall back to sending its whole volume list forever, which is the cost the digest exists to avoid. * master: pin what the digest check does to each kind of report The upgrade story rests on these: a server that reports no digest is never asked for anything, so the two sides can be upgraded in either order, and a disagreement that resending cannot fix is reported rather than re-asked, so it cannot loop. * topology: enumerate the digest coverage test from the message The list of fields was written out by hand, so a field added to VolumeInformationMessage later would fall outside the digest while the test went on passing, and a change to it would never reach the master. Walk the message descriptor instead. Some fields are narrowed or normalised on the way into VolumeInfo, so the smallest change to the wire value can land back on the stored one; the test offers several values per field and asks only that some change is visible.
1027 lines
34 KiB
Go
1027 lines
34 KiB
Go
package storage
|
|
|
|
import (
|
|
"errors"
|
|
"fmt"
|
|
"io"
|
|
"os"
|
|
"path/filepath"
|
|
"strings"
|
|
"sync"
|
|
"sync/atomic"
|
|
"syscall"
|
|
|
|
"github.com/seaweedfs/seaweedfs/weed/pb"
|
|
"github.com/seaweedfs/seaweedfs/weed/storage/volume_info"
|
|
"github.com/seaweedfs/seaweedfs/weed/util"
|
|
|
|
"google.golang.org/grpc"
|
|
|
|
"github.com/seaweedfs/seaweedfs/weed/glog"
|
|
"github.com/seaweedfs/seaweedfs/weed/pb/master_pb"
|
|
"github.com/seaweedfs/seaweedfs/weed/pb/volume_server_pb"
|
|
"github.com/seaweedfs/seaweedfs/weed/stats"
|
|
"github.com/seaweedfs/seaweedfs/weed/storage/erasure_coding"
|
|
"github.com/seaweedfs/seaweedfs/weed/storage/needle"
|
|
"github.com/seaweedfs/seaweedfs/weed/storage/super_block"
|
|
. "github.com/seaweedfs/seaweedfs/weed/storage/types"
|
|
)
|
|
|
|
const (
|
|
MAX_TTL_VOLUME_REMOVAL_DELAY = 10 // 10 minutes
|
|
HEARTBEAT_CHAN_SIZE = 1024
|
|
)
|
|
|
|
type ReadOption struct {
|
|
// request
|
|
ReadDeleted bool
|
|
AttemptMetaOnly bool
|
|
MustMetaOnly bool
|
|
// response
|
|
IsMetaOnly bool // read status
|
|
VolumeRevision uint16
|
|
IsOutOfRange bool // whether read over MaxPossibleVolumeSize
|
|
|
|
// If HasSlowRead is set to true:
|
|
// * read requests and write requests compete for the lock.
|
|
// * large file read P99 latency on busy sites will go up, due to the need to get locks multiple times.
|
|
// * write requests will see lower latency.
|
|
// If HasSlowRead is set to false:
|
|
// * read requests should complete asap, not blocking other requests.
|
|
// * write requests may see high latency when downloading large files.
|
|
HasSlowRead bool
|
|
|
|
// increasing ReadBufferSize can reduce the number of get locks times and shorten read P99 latency.
|
|
// but will increase memory usage a bit. Use with hasSlowRead normally.
|
|
ReadBufferSize int
|
|
}
|
|
|
|
/*
|
|
* A VolumeServer contains one Store
|
|
*/
|
|
type Store struct {
|
|
MasterAddress pb.ServerAddress
|
|
grpcDialOption grpc.DialOption
|
|
volumeSizeLimit uint64 // read from the master
|
|
preallocate atomic.Bool // read from the master
|
|
Ip string
|
|
Port int
|
|
GrpcPort int
|
|
PublicUrl string
|
|
Id string // volume server id, independent of ip:port for stable identification
|
|
Locations []*DiskLocation
|
|
dataCenter string // optional information, overwriting master setting if exists
|
|
rack string // optional information, overwriting master setting if exists
|
|
connected bool
|
|
NeedleMapKind NeedleMapKind
|
|
State *State
|
|
StateUpdateChan chan *volume_server_pb.VolumeServerState
|
|
NewVolumesChan chan *master_pb.VolumeShortInformationMessage
|
|
DeletedVolumesChan chan *master_pb.VolumeShortInformationMessage
|
|
NewEcShardsChan chan *master_pb.VolumeEcShardInformationMessage
|
|
DeletedEcShardsChan chan *master_pb.VolumeEcShardInformationMessage
|
|
isStopping bool
|
|
}
|
|
|
|
func (s *Store) String() (str string) {
|
|
str = fmt.Sprintf("Id:%s, Ip:%s, Port:%d, GrpcPort:%d PublicUrl:%s, dataCenter:%s, rack:%s, connected:%v, volumeSizeLimit:%d", s.Id, s.Ip, s.Port, s.GrpcPort, s.PublicUrl, s.dataCenter, s.rack, s.connected, s.GetVolumeSizeLimit())
|
|
return
|
|
}
|
|
|
|
func NewStore(
|
|
grpcDialOption grpc.DialOption,
|
|
ip string, port int, grpcPort int, publicUrl string, id string,
|
|
dirnames []string, maxVolumeCounts []int32, minFreeSpaces []util.MinFreeSpace,
|
|
idxFolder string,
|
|
needleMapKind NeedleMapKind,
|
|
diskTypes []DiskType,
|
|
diskTags [][]string,
|
|
ldbTimeout int64,
|
|
diskProbeConfig stats.DiskIOProbeConfig,
|
|
) (s *Store) {
|
|
s = &Store{
|
|
grpcDialOption: grpcDialOption,
|
|
Port: port,
|
|
Ip: ip,
|
|
GrpcPort: grpcPort,
|
|
PublicUrl: publicUrl,
|
|
Id: id,
|
|
NeedleMapKind: needleMapKind,
|
|
Locations: make([]*DiskLocation, 0),
|
|
|
|
StateUpdateChan: make(chan *volume_server_pb.VolumeServerState, HEARTBEAT_CHAN_SIZE),
|
|
NewVolumesChan: make(chan *master_pb.VolumeShortInformationMessage, HEARTBEAT_CHAN_SIZE),
|
|
DeletedVolumesChan: make(chan *master_pb.VolumeShortInformationMessage, HEARTBEAT_CHAN_SIZE),
|
|
NewEcShardsChan: make(chan *master_pb.VolumeEcShardInformationMessage, HEARTBEAT_CHAN_SIZE),
|
|
DeletedEcShardsChan: make(chan *master_pb.VolumeEcShardInformationMessage, HEARTBEAT_CHAN_SIZE),
|
|
}
|
|
|
|
var wg sync.WaitGroup
|
|
for i := 0; i < len(dirnames); i++ {
|
|
var tags []string
|
|
if i < len(diskTags) {
|
|
tags = diskTags[i]
|
|
}
|
|
location := NewDiskLocation(dirnames[i], int32(maxVolumeCounts[i]), minFreeSpaces[i], idxFolder, diskTypes[i], tags, diskProbeConfig)
|
|
s.Locations = append(s.Locations, location)
|
|
stats.VolumeServerMaxVolumeCounter.Add(float64(maxVolumeCounts[i]))
|
|
|
|
diskId := uint32(i) // Track disk ID
|
|
|
|
location.ecShardNotifyHandler = func(collection string, vid needle.VolumeId, shardId erasure_coding.ShardId, ecVolume *erasure_coding.EcVolume) {
|
|
si := erasure_coding.NewShardsInfo()
|
|
si.Set(erasure_coding.NewShardInfo(shardId, erasure_coding.ShardSize(ecVolume.ShardSize())))
|
|
|
|
// Use non-blocking send during startup to avoid deadlock
|
|
// The channel reader only starts after connecting to master, but we're loading during startup
|
|
select {
|
|
case s.NewEcShardsChan <- &master_pb.VolumeEcShardInformationMessage{
|
|
Id: uint32(vid),
|
|
Collection: collection,
|
|
EcIndexBits: si.Bitmap(),
|
|
ShardSizes: si.SizesInt64(),
|
|
DiskType: string(location.DiskType),
|
|
ExpireAtSec: ecVolume.ExpireAtSec,
|
|
DiskId: diskId,
|
|
EncodeTsNs: ecVolume.EncodeTsNs,
|
|
}:
|
|
default:
|
|
// Channel full during startup - this is OK, heartbeat will report EC shards later
|
|
glog.V(2).Infof("NewEcShardsChan full during startup for shard %d.%d, will be reported in heartbeat", vid, shardId)
|
|
}
|
|
}
|
|
|
|
wg.Add(1)
|
|
go func(id uint32, diskLoc *DiskLocation) {
|
|
defer wg.Done()
|
|
diskLoc.loadExistingVolumesWithId(needleMapKind, ldbTimeout, id)
|
|
}(diskId, location)
|
|
}
|
|
wg.Wait()
|
|
|
|
// First, scrub partial EC artefacts left on one disk by an interrupted
|
|
// encode while the source .dat still lives on a sibling disk of the
|
|
// same store. The per-disk loader cannot see the sibling .dat and so
|
|
// loads the partial shards as if they were a distributed-EC layout,
|
|
// which makes the volume server heartbeat both a regular replica and
|
|
// an EC shard set for the same vid (issue #9478). Running before the
|
|
// cross-disk reconcile keeps that pass from later re-loading shards
|
|
// we just cleaned up.
|
|
s.pruneIncompleteEcWithSiblingDat()
|
|
|
|
// Physically mirror EC sidecars onto every shard-bearing disk so
|
|
// each disk mounts self-contained. Must run before the cross-disk
|
|
// reconciler so the orphan pass can prefer the local IdxDirectory.
|
|
s.mirrorEcMetadataToShardDisks()
|
|
|
|
// Cross-disk fallback for orphan shards — ec.balance can land
|
|
// shards on one disk while leaving the index on another. Still
|
|
// needed after the mirror pass for volumes whose mirror failed
|
|
// (read-only target, out of space, partial copy).
|
|
s.reconcileEcShardsAcrossDisks()
|
|
|
|
// Resolve state.pb's directory via the first disk location so it inherits
|
|
// the same `~` expansion and empty-idxFolder fallback used for .idx files,
|
|
// and is never written as a relative path against the process CWD (#9173).
|
|
stateDir := idxFolder
|
|
if len(s.Locations) > 0 {
|
|
stateDir = s.Locations[0].IdxDirectory
|
|
} else if stateDir != "" {
|
|
stateDir = util.ResolvePath(stateDir)
|
|
}
|
|
var err error
|
|
s.State, err = NewState(stateDir)
|
|
if err != nil {
|
|
glog.Fatalf("failed to resolve state for volume %s: %v", id, err)
|
|
}
|
|
|
|
return
|
|
}
|
|
|
|
func (s *Store) LoadState() error {
|
|
err := s.State.Load()
|
|
if s.State.Proto() != nil && err == nil {
|
|
select {
|
|
case s.StateUpdateChan <- s.State.Proto():
|
|
default:
|
|
glog.V(2).Infof("StateUpdateChan full during LoadState, state will be reported in heartbeat")
|
|
}
|
|
}
|
|
return err
|
|
}
|
|
|
|
func (s *Store) SaveState() error {
|
|
if s.State.Proto() == nil {
|
|
glog.Warningf("tried to save empty state for store %s", s.Id)
|
|
return nil
|
|
}
|
|
|
|
err := s.State.Save()
|
|
if s.State.Proto() != nil && err == nil {
|
|
select {
|
|
case s.StateUpdateChan <- s.State.Proto():
|
|
default:
|
|
glog.V(2).Infof("StateUpdateChan full during SaveState, state will be reported in heartbeat")
|
|
}
|
|
}
|
|
return err
|
|
}
|
|
|
|
func (s *Store) AddVolume(volumeId needle.VolumeId, collection string, needleMapKind NeedleMapKind, replicaPlacement string, ttlString string, preallocate int64, ver needle.Version, MemoryMapMaxSizeMb uint32, diskType DiskType, ldbTimeout int64) error {
|
|
rt, e := super_block.NewReplicaPlacementFromString(replicaPlacement)
|
|
if e != nil {
|
|
return e
|
|
}
|
|
ttl, e := needle.ReadTTL(ttlString)
|
|
if e != nil {
|
|
return e
|
|
}
|
|
e = s.addVolume(volumeId, collection, needleMapKind, rt, ttl, preallocate, ver, MemoryMapMaxSizeMb, diskType, ldbTimeout)
|
|
return e
|
|
}
|
|
|
|
func (s *Store) DeleteCollection(collection string) (e error) {
|
|
for _, location := range s.Locations {
|
|
e = location.DeleteCollectionFromDiskLocation(collection)
|
|
if e != nil {
|
|
return
|
|
}
|
|
stats.DeleteCollectionMetrics(collection)
|
|
// let the heartbeat send the list of volumes, instead of sending the deleted volume ids to DeletedVolumesChan
|
|
}
|
|
return
|
|
}
|
|
|
|
func (s *Store) findVolume(vid needle.VolumeId) *Volume {
|
|
for _, location := range s.Locations {
|
|
if v, found := location.FindVolume(vid); found {
|
|
return v
|
|
}
|
|
}
|
|
return nil
|
|
}
|
|
func (s *Store) FindFreeLocation(filterFn func(location *DiskLocation) bool) (ret *DiskLocation) {
|
|
max := int32(0)
|
|
for _, location := range s.Locations {
|
|
if filterFn != nil && !filterFn(location) {
|
|
continue
|
|
}
|
|
if location.isDiskSpaceLow.Load() {
|
|
continue
|
|
}
|
|
currentFreeCount := location.MaxVolumeCount - int32(location.VolumesLen())
|
|
currentFreeCount *= erasure_coding.DataShardsCount
|
|
currentFreeCount -= int32(location.EcShardCount())
|
|
currentFreeCount /= erasure_coding.DataShardsCount
|
|
if currentFreeCount > max {
|
|
max = currentFreeCount
|
|
ret = location
|
|
}
|
|
}
|
|
return ret
|
|
}
|
|
func (s *Store) addVolume(vid needle.VolumeId, collection string, needleMapKind NeedleMapKind, replicaPlacement *super_block.ReplicaPlacement, ttl *needle.TTL, preallocate int64, ver needle.Version, memoryMapMaxSizeMb uint32, diskType DiskType, ldbTimeout int64) error {
|
|
if s.findVolume(vid) != nil {
|
|
return fmt.Errorf("Volume Id %d already exists!", vid)
|
|
}
|
|
|
|
// Find location with lowest local volume count (load balancing)
|
|
var location *DiskLocation
|
|
var diskId uint32
|
|
var minVolCount int
|
|
for i, loc := range s.Locations {
|
|
if loc.DiskType == diskType && s.hasFreeDiskLocation(loc) {
|
|
volCount := loc.LocalVolumesLen()
|
|
if location == nil || volCount < minVolCount {
|
|
location = loc
|
|
diskId = uint32(i)
|
|
minVolCount = volCount
|
|
}
|
|
}
|
|
}
|
|
|
|
if location != nil {
|
|
glog.V(0).Infof("In dir %s (disk ID %d) adds volume:%v collection:%s replicaPlacement:%v ttl:%v",
|
|
location.Directory, diskId, vid, collection, replicaPlacement, ttl)
|
|
if volume, err := NewVolume(location.Directory, location.IdxDirectory, collection, vid, needleMapKind, replicaPlacement, ttl, preallocate, ver, memoryMapMaxSizeMb, ldbTimeout); err == nil {
|
|
volume.diskId = diskId // Set the disk ID
|
|
location.SetVolume(vid, volume)
|
|
glog.V(0).Infof("add volume %d on disk ID %d", vid, diskId)
|
|
s.NewVolumesChan <- &master_pb.VolumeShortInformationMessage{
|
|
Id: uint32(vid),
|
|
Collection: collection,
|
|
ReplicaPlacement: uint32(replicaPlacement.Byte()),
|
|
Version: uint32(volume.Version()),
|
|
Ttl: ttl.ToUint32(),
|
|
DiskType: string(diskType),
|
|
DiskId: diskId,
|
|
}
|
|
return nil
|
|
} else {
|
|
return err
|
|
}
|
|
}
|
|
return fmt.Errorf("No more free space left")
|
|
}
|
|
|
|
// hasFreeDiskLocation checks if a disk location has free space
|
|
func (s *Store) hasFreeDiskLocation(location *DiskLocation) bool {
|
|
// Check if disk space is low first
|
|
if location.isDiskSpaceLow.Load() {
|
|
return false
|
|
}
|
|
|
|
// Check if disk is available
|
|
if location.isDiskUnavailable.Load() {
|
|
return false
|
|
}
|
|
|
|
// If MaxVolumeCount is 0, it means unlimited volumes are allowed
|
|
if location.MaxVolumeCount == 0 {
|
|
return true
|
|
}
|
|
|
|
// Check if current volume count is below the maximum
|
|
return int64(location.VolumesLen()) < int64(location.MaxVolumeCount)
|
|
}
|
|
|
|
func (s *Store) VolumeInfos() (allStats []*VolumeInfo) {
|
|
for _, location := range s.Locations {
|
|
stats := collectStatsForOneLocation(location)
|
|
allStats = append(allStats, stats...)
|
|
}
|
|
sortVolumeInfos(allStats)
|
|
return allStats
|
|
}
|
|
|
|
func collectStatsForOneLocation(location *DiskLocation) (stats []*VolumeInfo) {
|
|
location.volumesLock.RLock()
|
|
defer location.volumesLock.RUnlock()
|
|
|
|
for k, v := range location.volumes {
|
|
s := collectStatForOneVolume(k, v)
|
|
stats = append(stats, s)
|
|
}
|
|
return stats
|
|
}
|
|
|
|
func collectStatForOneVolume(vid needle.VolumeId, v *Volume) (s *VolumeInfo) {
|
|
|
|
s = &VolumeInfo{
|
|
Id: vid,
|
|
Collection: v.Collection,
|
|
ReplicaPlacement: v.ReplicaPlacement,
|
|
Version: v.Version(),
|
|
ReadOnly: v.IsReadOnly(),
|
|
Ttl: v.Ttl,
|
|
CompactRevision: uint32(v.CompactionRevision),
|
|
DiskType: v.DiskType().String(),
|
|
DiskId: v.diskId,
|
|
}
|
|
s.RemoteStorageName, s.RemoteStorageKey = v.RemoteStorageNameKey()
|
|
|
|
v.dataFileAccessLock.RLock()
|
|
defer v.dataFileAccessLock.RUnlock()
|
|
|
|
if v.nm == nil {
|
|
return
|
|
}
|
|
|
|
s.FileCount = v.nm.FileCount()
|
|
s.DeleteCount = v.nm.DeletedCount()
|
|
s.DeletedByteCount = v.nm.DeletedSize()
|
|
s.Size = v.nm.ContentSize()
|
|
if v.DataBackend != nil {
|
|
if _, modTime, e := v.DataBackend.GetStat(); e == nil {
|
|
s.ModifiedAtSecond = modTime.Unix()
|
|
}
|
|
}
|
|
return
|
|
}
|
|
|
|
func (s *Store) SetDataCenter(dataCenter string) {
|
|
s.dataCenter = dataCenter
|
|
}
|
|
func (s *Store) SetRack(rack string) {
|
|
s.rack = rack
|
|
}
|
|
func (s *Store) GetDataCenter() string {
|
|
return s.dataCenter
|
|
}
|
|
func (s *Store) GetRack() string {
|
|
return s.rack
|
|
}
|
|
|
|
func (s *Store) CollectHeartbeat() *master_pb.Heartbeat {
|
|
var volumeMessages []*master_pb.VolumeInformationMessage
|
|
// Digest of exactly what this heartbeat reports, so the master can tell
|
|
// whether its copy is current. Volumes skipped above -- quarantined,
|
|
// phantom, expired -- are absent from both the list and the digest.
|
|
var volumeDigest uint64
|
|
maxVolumeCounts := make(map[string]uint32)
|
|
// Per-disk effective max for DiskTag, captured alongside the per-type sum.
|
|
diskMaxByID := make(map[int]int32)
|
|
diskTotalBytes := make(map[string]uint64)
|
|
diskFreeBytes := make(map[string]uint64)
|
|
var maxFileKey NeedleId
|
|
collectionVolumeSize := make(map[string]int64)
|
|
collectionVolumeDeletedBytes := make(map[string]int64)
|
|
collectionVolumeReadOnlyCount := make(map[string]map[string]uint8)
|
|
for diskID, location := range s.Locations {
|
|
if location.isDiskUnavailable.Load() {
|
|
continue
|
|
}
|
|
var deleteVids []needle.VolumeId
|
|
effectiveMaxCount := location.MaxVolumeCount
|
|
if location.isDiskSpaceLow.Load() {
|
|
usedSlots := int32(location.LocalVolumesLen())
|
|
ecShardCount := location.EcShardCount()
|
|
usedSlots += int32((ecShardCount + erasure_coding.DataShardsCount - 1) / erasure_coding.DataShardsCount)
|
|
effectiveMaxCount = usedSlots
|
|
}
|
|
if effectiveMaxCount < 0 {
|
|
effectiveMaxCount = 0
|
|
}
|
|
maxVolumeCounts[string(location.DiskType)] += uint32(effectiveMaxCount)
|
|
diskMaxByID[diskID] = effectiveMaxCount
|
|
// Sum physical capacity per disk type. This assumes one location per
|
|
// filesystem; if several -dir on one mount share a disk type, its total and
|
|
// free are both counted once per location, so the used ratio the balance
|
|
// gate relies on stays correct, but absolute capacity is over-reported.
|
|
// Reporting per physical disk (mirroring max_volume_count_by_disk) is the
|
|
// exact fix.
|
|
diskTotalBytes[string(location.DiskType)] += location.diskTotalBytes.Load()
|
|
diskFreeBytes[string(location.DiskType)] += location.diskFreeBytes.Load()
|
|
location.volumesLock.RLock()
|
|
for _, v := range location.volumes {
|
|
curMaxFileKey, volumeMessage := v.ToVolumeInformationMessage()
|
|
if volumeMessage == nil {
|
|
continue
|
|
}
|
|
if maxFileKey < curMaxFileKey {
|
|
maxFileKey = curMaxFileKey
|
|
}
|
|
|
|
ioErr, ioCount, quarantined := v.getIoErrorState()
|
|
if quarantined || (ioErr != nil && ioCount >= IoErrorTolerance) {
|
|
// Sustained EIO: stop announcing this replica so the master
|
|
// re-replicates from healthy peers, and mark it read-only
|
|
// so further writes fail fast instead of producing more
|
|
// EIOs. Never physically delete the data — the disk may
|
|
// be transiently bad and this could be the last good
|
|
// copy. The quarantine is sticky: a stray successful read
|
|
// clears the streak counter but must not silently put a
|
|
// known-bad replica back into rotation; recovery is via
|
|
// MarkVolumeWritable.
|
|
if !quarantined {
|
|
glog.Warningf("volume %d quarantined after %d consecutive IO errors: %v",
|
|
v.Id, ioCount, ioErr)
|
|
v.markIoQuarantined()
|
|
}
|
|
v.noWriteLock.Lock()
|
|
v.noWriteOrDelete = true
|
|
v.noWriteLock.Unlock()
|
|
// Skip per-volume size and read-only bookkeeping: a
|
|
// quarantined replica should not be summed into the
|
|
// collection's reported total nor counted in the
|
|
// read-only stats.
|
|
continue
|
|
}
|
|
|
|
shouldDeleteVolume := false
|
|
if !v.expired(volumeMessage.Size, s.GetVolumeSizeLimit()) {
|
|
volumeMessages = append(volumeMessages, volumeMessage)
|
|
volumeDigest ^= reportHashOf(volumeMessage)
|
|
} else {
|
|
if v.expiredLongEnough(MAX_TTL_VOLUME_REMOVAL_DELAY) {
|
|
deleteVids = append(deleteVids, v.Id)
|
|
shouldDeleteVolume = true
|
|
} else {
|
|
glog.V(0).Infof("volume %d is expired", v.Id)
|
|
}
|
|
}
|
|
|
|
if _, exist := collectionVolumeSize[v.Collection]; !exist {
|
|
collectionVolumeSize[v.Collection] = 0
|
|
collectionVolumeDeletedBytes[v.Collection] = 0
|
|
}
|
|
if !shouldDeleteVolume {
|
|
collectionVolumeSize[v.Collection] += int64(volumeMessage.Size)
|
|
collectionVolumeDeletedBytes[v.Collection] += int64(volumeMessage.DeletedByteCount)
|
|
} else {
|
|
collectionVolumeSize[v.Collection] -= int64(volumeMessage.Size)
|
|
if collectionVolumeSize[v.Collection] <= 0 {
|
|
delete(collectionVolumeSize, v.Collection)
|
|
}
|
|
}
|
|
|
|
if _, exist := collectionVolumeReadOnlyCount[v.Collection]; !exist {
|
|
collectionVolumeReadOnlyCount[v.Collection] = map[string]uint8{
|
|
stats.IsReadOnly: 0,
|
|
stats.NoWriteOrDelete: 0,
|
|
stats.NoWriteCanDelete: 0,
|
|
stats.IsDiskSpaceLow: 0,
|
|
}
|
|
}
|
|
if !shouldDeleteVolume && v.IsReadOnly() {
|
|
collectionVolumeReadOnlyCount[v.Collection][stats.IsReadOnly] += 1
|
|
if v.noWriteOrDelete {
|
|
collectionVolumeReadOnlyCount[v.Collection][stats.NoWriteOrDelete] += 1
|
|
}
|
|
if v.noWriteCanDelete {
|
|
collectionVolumeReadOnlyCount[v.Collection][stats.NoWriteCanDelete] += 1
|
|
}
|
|
if v.location.isDiskSpaceLow.Load() {
|
|
collectionVolumeReadOnlyCount[v.Collection][stats.IsDiskSpaceLow] += 1
|
|
}
|
|
}
|
|
}
|
|
location.volumesLock.RUnlock()
|
|
|
|
if len(deleteVids) > 0 {
|
|
// delete expired volumes.
|
|
location.volumesLock.Lock()
|
|
for _, vid := range deleteVids {
|
|
found, err := location.deleteVolumeById(vid, false, false)
|
|
if err == nil {
|
|
if found {
|
|
glog.V(0).Infof("volume %d is deleted", vid)
|
|
}
|
|
} else {
|
|
glog.Warningf("delete volume %d: %v", vid, err)
|
|
}
|
|
}
|
|
location.volumesLock.Unlock()
|
|
}
|
|
}
|
|
|
|
// delete expired ec volumes
|
|
ecVolumeMessages, deletedEcVolumes := s.deleteExpiredEcVolumes()
|
|
|
|
var uuidList []string
|
|
for _, loc := range s.Locations {
|
|
uuidList = append(uuidList, loc.DirectoryUuid)
|
|
}
|
|
var diskTags []*master_pb.DiskTag
|
|
for diskID, loc := range s.Locations {
|
|
diskTags = append(diskTags, &master_pb.DiskTag{
|
|
DiskId: uint32(diskID),
|
|
Tags: append([]string(nil), loc.Tags...),
|
|
Type: string(loc.DiskType),
|
|
MaxVolumeCount: int64(diskMaxByID[diskID]),
|
|
})
|
|
}
|
|
|
|
for col, size := range collectionVolumeSize {
|
|
stats.VolumeServerDiskSizeGauge.WithLabelValues(col, "normal").Set(float64(size))
|
|
}
|
|
|
|
for col, deletedBytes := range collectionVolumeDeletedBytes {
|
|
stats.VolumeServerDiskSizeGauge.WithLabelValues(col, "deleted_bytes").Set(float64(deletedBytes))
|
|
}
|
|
|
|
for col, types := range collectionVolumeReadOnlyCount {
|
|
for t, count := range types {
|
|
stats.VolumeServerReadOnlyVolumeGauge.WithLabelValues(col, t).Set(float64(count))
|
|
}
|
|
}
|
|
|
|
return &master_pb.Heartbeat{
|
|
Ip: s.Ip,
|
|
Port: uint32(s.Port),
|
|
GrpcPort: uint32(s.GrpcPort),
|
|
PublicUrl: s.PublicUrl,
|
|
Id: s.Id,
|
|
MaxVolumeCounts: maxVolumeCounts,
|
|
DiskTotalBytes: diskTotalBytes,
|
|
DiskFreeBytes: diskFreeBytes,
|
|
MaxFileKey: NeedleIdToUint64(maxFileKey),
|
|
DataCenter: s.dataCenter,
|
|
Rack: s.rack,
|
|
Volumes: volumeMessages,
|
|
VolumeDigest: &volumeDigest,
|
|
DeletedEcShards: deletedEcVolumes,
|
|
HasNoVolumes: len(volumeMessages) == 0,
|
|
HasNoEcShards: len(ecVolumeMessages) == 0,
|
|
LocationUuids: uuidList,
|
|
DiskTags: diskTags,
|
|
}
|
|
|
|
}
|
|
|
|
// reportHashOf digests a volume exactly as the master will digest what it
|
|
// stores for that volume, by running the master's own hash over the same
|
|
// conversion the master applies to the message.
|
|
func reportHashOf(m *master_pb.VolumeInformationMessage) uint64 {
|
|
vi, err := NewVolumeInfo(m)
|
|
if err != nil {
|
|
glog.Warningf("volume %d: cannot digest heartbeat report: %v", m.Id, err)
|
|
return 0
|
|
}
|
|
return vi.ReportHash()
|
|
}
|
|
|
|
func (s *Store) deleteExpiredEcVolumes() (ecShards, deleted []*master_pb.VolumeEcShardInformationMessage) {
|
|
for diskId, location := range s.Locations {
|
|
if location.isDiskUnavailable.Load() {
|
|
continue
|
|
}
|
|
|
|
// Collect ecVolume to be deleted
|
|
var toDeleteEvs []*erasure_coding.EcVolume
|
|
location.ecVolumesLock.RLock()
|
|
for _, ev := range location.ecVolumes {
|
|
if ev.IsTimeToDestroy() {
|
|
toDeleteEvs = append(toDeleteEvs, ev)
|
|
} else {
|
|
messages := ev.ToVolumeEcShardInformationMessage(uint32(diskId))
|
|
ecShards = append(ecShards, messages...)
|
|
}
|
|
}
|
|
location.ecVolumesLock.RUnlock()
|
|
|
|
// Delete expired volumes
|
|
for _, ev := range toDeleteEvs {
|
|
messages := ev.ToVolumeEcShardInformationMessage(uint32(diskId))
|
|
// deleteEcVolumeById has its own lock
|
|
err := location.deleteEcVolumeById(ev.VolumeId)
|
|
if err != nil {
|
|
ecShards = append(ecShards, messages...)
|
|
glog.Errorf("delete EcVolume err %d: %v", ev.VolumeId, err)
|
|
continue
|
|
}
|
|
// No need for additional lock here since we only need the messages
|
|
// from volumes that were already collected
|
|
deleted = append(deleted, messages...)
|
|
}
|
|
}
|
|
return
|
|
}
|
|
|
|
func (s *Store) SetStopping() {
|
|
s.isStopping = true
|
|
for _, location := range s.Locations {
|
|
location.SetStopping()
|
|
}
|
|
}
|
|
|
|
func (s *Store) IsStopping() bool {
|
|
return s.isStopping
|
|
}
|
|
|
|
func (s *Store) LoadNewVolumes() {
|
|
for _, location := range s.Locations {
|
|
location.loadExistingVolumes(s.NeedleMapKind, 0)
|
|
}
|
|
}
|
|
|
|
func (s *Store) Close() {
|
|
for _, location := range s.Locations {
|
|
location.Close()
|
|
}
|
|
}
|
|
|
|
func (s *Store) WriteVolumeNeedle(i needle.VolumeId, n *needle.Needle, checkCookie bool, fsync bool) (isUnchanged bool, err error) {
|
|
if v := s.findVolume(i); v != nil {
|
|
if v.IsReadOnly() {
|
|
err = fmt.Errorf("volume %d is read only", i)
|
|
return
|
|
}
|
|
_, _, isUnchanged, err = v.writeNeedle2(n, checkCookie, fsync && !s.isStopping)
|
|
return
|
|
}
|
|
glog.V(0).Infoln("volume", i, "not found!")
|
|
err = fmt.Errorf("volume %d not found on %s:%d", i, s.Ip, s.Port)
|
|
return
|
|
}
|
|
|
|
func (s *Store) DeleteVolumeNeedle(i needle.VolumeId, n *needle.Needle) (Size, error) {
|
|
if v := s.findVolume(i); v != nil {
|
|
if v.noWriteOrDelete {
|
|
return 0, fmt.Errorf("volume %d is read only", i)
|
|
}
|
|
return v.deleteNeedle2(n)
|
|
}
|
|
return 0, fmt.Errorf("volume %d not found on %s:%d", i, s.Ip, s.Port)
|
|
}
|
|
|
|
func (s *Store) ReadVolumeNeedle(i needle.VolumeId, n *needle.Needle, readOption *ReadOption, onReadSizeFn func(size Size)) (int, error) {
|
|
if v := s.findVolume(i); v != nil {
|
|
return v.readNeedle(n, readOption, onReadSizeFn)
|
|
}
|
|
return 0, fmt.Errorf("volume %d not found", i)
|
|
}
|
|
|
|
func (s *Store) ReadVolumeNeedleMetaAt(i needle.VolumeId, n *needle.Needle, offset int64, size int32) error {
|
|
if v := s.findVolume(i); v != nil {
|
|
return v.readNeedleMetaAt(n, offset, size)
|
|
}
|
|
return fmt.Errorf("volume %d not found", i)
|
|
}
|
|
|
|
func (s *Store) ReadVolumeNeedleDataInto(i needle.VolumeId, n *needle.Needle, readOption *ReadOption, writer io.Writer, offset int64, size int64) error {
|
|
if v := s.findVolume(i); v != nil {
|
|
return v.readNeedleDataInto(n, readOption, writer, offset, size)
|
|
}
|
|
return fmt.Errorf("volume %d not found", i)
|
|
}
|
|
func (s *Store) GetVolume(i needle.VolumeId) *Volume {
|
|
return s.findVolume(i)
|
|
}
|
|
|
|
func (s *Store) HasVolume(i needle.VolumeId) bool {
|
|
v := s.findVolume(i)
|
|
return v != nil
|
|
}
|
|
|
|
func (s *Store) MarkVolumeReadonly(i needle.VolumeId, persist bool) error {
|
|
v := s.findVolume(i)
|
|
if v == nil {
|
|
return fmt.Errorf("volume %d not found", i)
|
|
}
|
|
v.noWriteLock.Lock()
|
|
v.noWriteOrDelete = true
|
|
if persist {
|
|
v.PersistReadOnly(true)
|
|
}
|
|
v.noWriteLock.Unlock()
|
|
return nil
|
|
}
|
|
|
|
func (s *Store) MarkVolumeWritable(i needle.VolumeId) error {
|
|
v := s.findVolume(i)
|
|
if v == nil {
|
|
return fmt.Errorf("volume %d not found", i)
|
|
}
|
|
// If the volume booted with .vif ReadOnly=true, .idx is opened O_RDONLY
|
|
// and v.nm is a SortedFileNeedleMap that rejects Put. Swap to writable
|
|
// form before flipping the flag so the next write doesn't race past a
|
|
// stale read-only handle.
|
|
if err := v.reopenIdxForWrite(); err != nil {
|
|
return fmt.Errorf("volume %d reopen idx for write: %v", i, err)
|
|
}
|
|
v.noWriteLock.Lock()
|
|
v.noWriteOrDelete = false
|
|
v.PersistReadOnly(false)
|
|
v.noWriteLock.Unlock()
|
|
// Clear the EIO streak and the sticky quarantine flag so the next
|
|
// CollectHeartbeat can announce the volume again. If the disk is
|
|
// still bad, the next failed op will re-arm the streak.
|
|
v.resetIoErrorState()
|
|
return nil
|
|
}
|
|
|
|
func (s *Store) MountVolume(i needle.VolumeId) error {
|
|
for diskId, location := range s.Locations {
|
|
if found := location.LoadVolume(uint32(diskId), i, s.NeedleMapKind); found == true {
|
|
glog.V(0).Infof("mount volume %d", i)
|
|
v := s.findVolume(i)
|
|
v.diskId = uint32(diskId) // Set disk ID when mounting
|
|
s.NewVolumesChan <- &master_pb.VolumeShortInformationMessage{
|
|
Id: uint32(v.Id),
|
|
Collection: v.Collection,
|
|
ReplicaPlacement: uint32(v.ReplicaPlacement.Byte()),
|
|
Version: uint32(v.Version()),
|
|
Ttl: v.Ttl.ToUint32(),
|
|
DiskType: string(v.location.DiskType),
|
|
DiskId: uint32(diskId),
|
|
}
|
|
return nil
|
|
}
|
|
}
|
|
|
|
return fmt.Errorf("volume %d not found on disk", i)
|
|
}
|
|
|
|
func (s *Store) UnmountVolume(i needle.VolumeId) error {
|
|
// A volume id can be mounted on more than one disk of this server (e.g. a stale
|
|
// twin re-attached after a disk repair, since NewStore has no cross-disk
|
|
// duplicate guard). Unmount every copy, not just the first match, so a stale
|
|
// twin cannot survive and re-register as the volume's content. A no-op unmount
|
|
// (no copy present) is not an error, matching the prior behavior.
|
|
var errs []error
|
|
for _, location := range s.Locations {
|
|
v, found := location.FindVolume(i)
|
|
if !found {
|
|
continue
|
|
}
|
|
message := master_pb.VolumeShortInformationMessage{
|
|
Id: uint32(v.Id),
|
|
Collection: v.Collection,
|
|
ReplicaPlacement: uint32(v.ReplicaPlacement.Byte()),
|
|
Version: uint32(v.Version()),
|
|
Ttl: v.Ttl.ToUint32(),
|
|
DiskType: string(location.DiskType),
|
|
DiskId: v.diskId,
|
|
}
|
|
if err := location.UnloadVolume(i); err != nil {
|
|
if err == ErrVolumeNotFound {
|
|
continue
|
|
}
|
|
// Keep going so the other copies are still unmounted; surface the
|
|
// failure so a copy left mounted is not reported as success.
|
|
glog.Errorf("UnmountVolume %d on %s: %v", i, location.Directory, err)
|
|
errs = append(errs, err)
|
|
continue
|
|
}
|
|
glog.V(0).Infof("UnmountVolume %d disk_id:%d", i, v.diskId)
|
|
s.DeletedVolumesChan <- &message
|
|
}
|
|
return errors.Join(errs...)
|
|
}
|
|
|
|
// ConsolidateVolumeIndex returns a volume's index to the configured -dir.idx
|
|
// directory when it is currently co-located with the data. A decode/reconstruct
|
|
// leaves the rebuilt .idx next to the .dat so the on-demand mount can find the
|
|
// volume while the old EC .ecx still coexists in the index directory; once the
|
|
// shards are gone this puts the index back on its own tier. It is a no-op when
|
|
// no separate index directory is configured or the index is already there.
|
|
//
|
|
// The relocation happens in place under the volume lock (see RelocateIndexTo),
|
|
// so the volume never leaves the mounted set and a concurrent read blocks
|
|
// briefly rather than failing.
|
|
func (s *Store) ConsolidateVolumeIndex(i needle.VolumeId) error {
|
|
for _, location := range s.Locations {
|
|
if v, found := location.FindVolume(i); found {
|
|
if location.IdxDirectory == location.Directory {
|
|
return nil
|
|
}
|
|
return v.RelocateIndexTo(location.IdxDirectory)
|
|
}
|
|
}
|
|
return fmt.Errorf("volume %d not found on disk", i)
|
|
}
|
|
|
|
// RenameOrCopyFile moves src to dst, falling back to a copy when the two sit on
|
|
// different filesystems (os.Rename returns EXDEV across the data and -dir.idx
|
|
// disks, the separate media the flag exists to use).
|
|
func RenameOrCopyFile(src, dst string) error {
|
|
if err := os.Rename(src, dst); err == nil {
|
|
return nil
|
|
} else if !errors.Is(err, syscall.EXDEV) {
|
|
return err
|
|
}
|
|
in, err := os.Open(src)
|
|
if err != nil {
|
|
return err
|
|
}
|
|
defer in.Close()
|
|
out, err := os.OpenFile(dst, os.O_WRONLY|os.O_CREATE|os.O_TRUNC, 0644)
|
|
if err != nil {
|
|
return err
|
|
}
|
|
if _, err := io.Copy(out, in); err != nil {
|
|
out.Close()
|
|
os.Remove(dst)
|
|
return err
|
|
}
|
|
if err := out.Sync(); err != nil {
|
|
out.Close()
|
|
os.Remove(dst)
|
|
return err
|
|
}
|
|
if err := out.Close(); err != nil {
|
|
os.Remove(dst)
|
|
return err
|
|
}
|
|
// Roll the copy back if the source cannot be removed, so a failure never
|
|
// leaves two divergent copies (the loader would keep using the data-dir one
|
|
// while the idx-dir orphan goes stale).
|
|
if err := os.Remove(src); err != nil {
|
|
os.Remove(dst)
|
|
return err
|
|
}
|
|
return nil
|
|
}
|
|
|
|
func (s *Store) DeleteVolume(i needle.VolumeId, onlyEmpty bool, keepRemoteData bool) error {
|
|
// Delete every copy of the volume id across disks, not just the first match, so
|
|
// a stale twin (e.g. a re-attached disk; NewStore has no cross-disk duplicate
|
|
// guard) cannot survive a delete and re-register as the volume's content.
|
|
deletedAny := false
|
|
var errs []error
|
|
for _, location := range s.Locations {
|
|
v, found := location.FindVolume(i)
|
|
if !found {
|
|
continue
|
|
}
|
|
message := master_pb.VolumeShortInformationMessage{
|
|
Id: uint32(v.Id),
|
|
Collection: v.Collection,
|
|
ReplicaPlacement: uint32(v.ReplicaPlacement.Byte()),
|
|
Version: uint32(v.Version()),
|
|
Ttl: v.Ttl.ToUint32(),
|
|
DiskType: string(location.DiskType),
|
|
DiskId: v.diskId,
|
|
}
|
|
err := location.DeleteVolume(i, onlyEmpty, keepRemoteData)
|
|
if err == nil {
|
|
glog.V(0).Infof("DeleteVolume %d disk_id:%d", i, v.diskId)
|
|
s.DeletedVolumesChan <- &message
|
|
deletedAny = true
|
|
} else if err == ErrVolumeNotFound {
|
|
continue
|
|
} else if err == ErrVolumeNotEmpty {
|
|
// onlyEmpty: a non-empty copy aborts the delete rather than leaving a
|
|
// partial result across disks.
|
|
return fmt.Errorf("DeleteVolume %d: %v", i, err)
|
|
} else {
|
|
// A real failure on one disk must not be masked by another copy's
|
|
// success: a stale copy left on the failing disk would re-register.
|
|
glog.Errorf("DeleteVolume %d: %v", i, err)
|
|
errs = append(errs, err)
|
|
}
|
|
}
|
|
if len(errs) > 0 {
|
|
return fmt.Errorf("DeleteVolume %d failed on some disks: %w", i, errors.Join(errs...))
|
|
}
|
|
if !deletedAny {
|
|
return fmt.Errorf("delete volume %d not found on disk", i)
|
|
}
|
|
return nil
|
|
}
|
|
|
|
func (s *Store) ConfigureVolume(i needle.VolumeId, replication string) error {
|
|
|
|
for _, location := range s.Locations {
|
|
fileInfo, found := location.LocateVolume(i)
|
|
if !found {
|
|
continue
|
|
}
|
|
// load, modify, save
|
|
baseFileName := strings.TrimSuffix(fileInfo.Name(), filepath.Ext(fileInfo.Name()))
|
|
vifFile := filepath.Join(location.Directory, baseFileName+".vif")
|
|
volumeInfo, _, _, err := volume_info.MaybeLoadVolumeInfo(vifFile)
|
|
if err != nil {
|
|
return fmt.Errorf("volume %d failed to load vif: %v", i, err)
|
|
}
|
|
volumeInfo.Replication = replication
|
|
err = volume_info.SaveVolumeInfo(vifFile, volumeInfo)
|
|
if err != nil {
|
|
return fmt.Errorf("volume %d failed to save vif: %v", i, err)
|
|
}
|
|
return nil
|
|
}
|
|
|
|
return fmt.Errorf("volume %d not found on disk", i)
|
|
}
|
|
|
|
func (s *Store) SetVolumeSizeLimit(x uint64) {
|
|
atomic.StoreUint64(&s.volumeSizeLimit, x)
|
|
}
|
|
|
|
func (s *Store) GetVolumeSizeLimit() uint64 {
|
|
return atomic.LoadUint64(&s.volumeSizeLimit)
|
|
}
|
|
|
|
func (s *Store) SetPreallocate(x bool) {
|
|
s.preallocate.Store(x)
|
|
}
|
|
|
|
func (s *Store) GetPreallocate() bool {
|
|
return s.preallocate.Load()
|
|
}
|
|
|
|
func (s *Store) MaybeAdjustVolumeMax() (hasChanges bool) {
|
|
volumeSizeLimit := s.GetVolumeSizeLimit()
|
|
if volumeSizeLimit == 0 {
|
|
return
|
|
}
|
|
var newMaxVolumeCount int32
|
|
for _, diskLocation := range s.Locations {
|
|
if diskLocation.OriginalMaxVolumeCount == 0 {
|
|
currentMaxVolumeCount := atomic.LoadInt32(&diskLocation.MaxVolumeCount)
|
|
diskStatus := stats.NewDiskStatus(diskLocation.Directory)
|
|
var unusedSpace uint64 = 0
|
|
unclaimedSpaces := int64(diskStatus.Free)
|
|
if !s.GetPreallocate() {
|
|
unusedSpace = diskLocation.UnUsedSpace(volumeSizeLimit)
|
|
unclaimedSpaces -= int64(unusedSpace)
|
|
}
|
|
volCount := diskLocation.VolumesLen()
|
|
ecShardCount := diskLocation.EcShardCount()
|
|
maxVolumeCount := int32(volCount) + int32((ecShardCount+erasure_coding.DataShardsCount-1)/erasure_coding.DataShardsCount)
|
|
// One slot per full volume that fits in the unclaimed space.
|
|
// A "- 1" here used to zero the count when the disk had room for
|
|
// exactly one volume (free between 1x and 2x the limit), stranding
|
|
// auto-sized disks at maxVolumeCount 0 with no writable volume.
|
|
if unclaimedSpaces > 0 {
|
|
maxVolumeCount += int32(uint64(unclaimedSpaces) / volumeSizeLimit)
|
|
}
|
|
// An auto-sized disk with free space always hosts at least one volume.
|
|
if maxVolumeCount < 1 {
|
|
maxVolumeCount = 1
|
|
}
|
|
newMaxVolumeCount = newMaxVolumeCount + maxVolumeCount
|
|
atomic.StoreInt32(&diskLocation.MaxVolumeCount, maxVolumeCount)
|
|
glog.V(4).Infof("disk %s max %d unclaimedSpace:%dMB, unused:%dMB volumeSizeLimit:%dMB",
|
|
diskLocation.Directory, maxVolumeCount, unclaimedSpaces/1024/1024, unusedSpace/1024/1024, volumeSizeLimit/1024/1024)
|
|
hasChanges = hasChanges || currentMaxVolumeCount != atomic.LoadInt32(&diskLocation.MaxVolumeCount)
|
|
} else {
|
|
newMaxVolumeCount = newMaxVolumeCount + diskLocation.OriginalMaxVolumeCount
|
|
}
|
|
}
|
|
stats.VolumeServerMaxVolumeCounter.Set(float64(newMaxVolumeCount))
|
|
return
|
|
}
|