* src/sparse.c (pax_dump_header_1): Make sure the created header name is
shorter than NAME_FIELD_SIZE bytes.
* tests/sparse04.at: New testcase.
* tests/Makefile.am (TESTSUITE_AT): Add sparse04.at.
* tests/testsuite.at: Include sparse04.at.
* NEWS: Update.
* NEWS: Document this.
* src/compare.c (verify_volume): Decode the header before invoking
diff_archive, as diff_archive no longer does this as of the
2010-06-28 commit. Also, don't try to invoke diff_archive on a
zero block.
* tests/Makefile.am (TESTSUITE_AT): Add verify.at.
* tests/testsuite.at: Include verify.at.
* tests/verify.at: New file.
* tests/extrac17.at: Add --warning=no-timestamp, to avoid
bogus warning due to NFS clock skew.
* tests/remfiles01.at: Discard diagnostics that some shells
generate about broken pipes.
* tests/sigpipe.at: Likewise.
* tests/remfiles01.at: Fix typo: "test $EC" was written where
"test $EC -ne 0" was intended.
OpenBSD /bin/sh, and some other sh variants, squirrel away file
descriptors before closing them. For example, for "cat 3<&-" they
first dup file descriptor 3 to a fd that is 10 or greater, then
close 3 (because if "cat" had been a builtin command like ":" then
they would have wanted to avoid the fork and restore the fd after
":" finished); and they treat ordinary (forking) commands the same
as builtin commands. This approach fails after "ulimit -n 10".
Work around this deficiency by closing the file descriptors before
invoking ulimit. Problem reported by Christian Weisgerber in
<http://lists.gnu.org/archive/html/bug-tar/2010-10/msg00041.html>;
solution suggested by Jilles Tjoelker in
<http://article.gmane.org/gmane.comp.shells.dash/415>.
* tests/extrac11.at (scarce file descriptors): Close file
descriptors before invoking ulimit -n.
* tests/extrac13.at: Don't assume that "diff -c" outputs nothing
when there are no differences. This is not true on Solaris,
where it outputs "No differences encounted".
* tests/extrac11.at: Replace "((" with "( (" in shell scripts, as
"((" is not portable to the Korn shell, and POSIX 1003.1-2008 says
that "((" is not portable.
The commit 9c194c99 altered that order.
* src/list.c (transform_stat_info): New function. Split off from
decode_header.
(read_and): Call transform_stat_info right before do_something,
and after deciding if we should proceed with this member name,
so that name matching occurs before name transformation.
* tests/extrac17.at: New file.
* tests/Makefile.am (TESTSUITE_AT): Add extrac17.at
* tests/testsuite.at: Include extrac17.at.
Problem reported by Denis Excoffier in
<http://lists.gnu.org/archive/html/bug-tar/2010-10/msg00034.html>.
* src/extract.c (extract_dir): Use mkdirat, not mkdir.
* tests/extrac16.at: New file, to test for this bug.
* tests/Makefile.am (TESTSUITE_AT): Add it.
* tests/testsuite.at: Include it.
This file is a placeholder. It will be replaced with the actual ChangeLog
by make dist. Run make ChangeLog if you wish to create it earlier.
Without this change, if tar tried to extract a file A/B/C, noticed
that A/B didn't exist, attempted to mkdir A/B, and the mkdir
failed, it did not diagnose the mkdir failure, but simply reported
the failure to open A/B/C. This sometimes led to confusion
because it wasn't clear what tar was trying to do, in particular
that tar tried to mkdir A/B. With this patch, tar issues two
diagnostics in this case: one for A/B and the other for A/B/C.
Problem reported by Hauke Laging in
<http://lists.gnu.org/archive/html/bug-tar/2010-10/msg00020.html>.
* gnulib.modules: Remove faccessat.
* src/extract.c (make_directories): New arg INTERDIR_MADE.
Diagnose mkdir failure. Return 0 on success, nonzero on failure,
as opposed to nonzero iff some directory was created. All callers
changed. Simplify the code when mkdir fails, by checking whether
the desired file exists unless errno==EEXIST: this is more robust.
* tests/extrac15.at: New test, to check this.
* tests/Makefile.am (TESTSUITE_AT): Add it.
* tests/testsuite.at: Include it.
Several of the tests assumed that a newly created file cannot
have a time stamp dated in the future. This assumption is not
true when files are served by a remote host whose clock is
slightly in advance of ours. Fix the problems that I observed
when running "make check" a couple of times on such a server.
* tests/backup01.at: Use --warning=no-timestamp to suppress
clock-skew warnings.
* tests/chtype.at, tests/comprec.at, tests/exclude06.at:
* tests/extrac01.at, tests/extrac03.at, tests/extrac05.at:
* tests/extrac06.at, tests/extrac08.at, tests/extrac13.at:
* tests/extrac14.at, tests/incr01.at, tests/incr03.at, tests/link01.at:
* tests/multiv01.at, tests/multiv02.at, tests/multiv03.at:
* tests/pipe.at, tests/rename02.at, tests/rename03.at:
* tests/rename05.at, tests/same-order01.at, tests/same-order02.at:
* tests/sparse01.at:
Likewise.
* src/misc.c (chdir_do): Don't use O_NOFOLLOW when opening the
argument to -C. This is for consistency with "tar -c -C FOO", and
matches the new documentation.
* tests/extrac14.at: New file.
* tests/Makefile.am (TESTSUITE_AT): Add it.
* tests/testsuite.at: Include it.
This closes another race condition, that occurs when overwriting a
symlink with a regular file.
* NEWS (--dereference consistency): New section.
* doc/tar.texi (Option Summary): Describe new --deference behavior.
(dereference): Likewise. Remove discussion that I didn't follow,
even before --dereference was changed.
* src/common.h (deref_stat, set_file_atime): Adjust signatures.
* src/compare.c (diff_file, diff_multivol): Respect open_read_flags
instead of rolling our own flags. This implements the new behavior
for --dereference.
(diff_file, diff_dumpdir): Likewise, for fstatat_flags.
* src/create.c: Adjust to set_file_atime signature change.
* src/extract.c (mark_after_links, file_newer_p, extract_dir):
Likewise.
* src/incremen.c (try_purge_directory): Likewise.
* src/misc.c (maybe_backup_file): Likewise.
* src/extract.c (file_newer_p): New arg STP. All callers changed.
(maybe_recoverable): New arg REGULAR. All callers changed.
Handle the case of overwriting a symlink with a regular file,
when --overwrite is specified but --dereference is not.
(open_output_file): Add O_CLOEXEC, O_NOCTTY, O_NONBLOCK for
consistency with file creation. Add O_NOFOLLOW if
overwriting_old_files && ! dereference_option.
* src/incremen.c (update_parent_directory): Use fstat, not fstatat;
there's less to go wrong.
* src/misc.c (deref_stat): Remove DEREF arg. All callers changed.
Instead, use fstatat_flags.
(set_file_atime): Remove ATFLAG arg. All callers changed.
Instead, use fstatat_flags.
* src/names.c, src/update.c: Adjust to deref_stat signature change.
* src/tar.c (get_date_or_file): Use stat, not deref_stat, as this
is not a file to be archived.
* tests/Makefile.am (TESTSUITE_AT): Add extrac13.at.
* tests/extrac13.at: New file.
* tests/testsuite.at: Include it.
This change replaces traditional functions like 'open' with the
POSIX.1-2008 functions like 'openat'. Mostly this is an internal
refactoring change, in preparation for further changes to close
some races.
* gnulib.modules: Add faccessat, linkat, mkfifoat, renameat, symlinkat.
Remove save-cwd.
* src/Makefile.am (tar_LDADD): Add $(LIB_EACCESS).
* tests/Makefile.am (LDADD): Likewise.
* src/common.h (chdir_fd): New extern var.
* src/compare.c (diff_file, diff_multivol): Use openat instead of open.
* src/create.c (create_archive, restore_parent_fd): Likewise.
* src/extract.c (create_placeholder_file): Likewise.
* src/names.c (collect_and_sort_names): Likewise.
* src/update.c (append_file): Likewise.
* src/compare.c (diff_symlink): Use readlinkat instead of readlink.
* src/compare.c (diff_file): Use chdir_fd instead of AT_FDCWD.
* src/create.c (subfile_open, dump_file0): Likewise.
* src/extract.c (fd_chmod, fd_chown, fd_stat, set_stat):
(repair_delayed_set_stat, apply_nonancestor_delayed_set_stat):
Likewise.
* src/extract.c (mark_after_links, file_newer_p, extract_dir):
(extract_link, apply_delayed_links):
Use fstatat rather than stat or lstat.
* src/misc.c (maybe_backup_file, deref_stat): Likewise.
* src/extract.c (make_directories): Use mkdirat rather than mkdir.
Use faccessat rather than access. This fixes a minor permissions
bug when tar is running setuid (who would want to do that?!).
(open_output_file): Use openat rather than open.
In the process, this removes support for Masscomp's O_CTG files,
which aren't compatible with openat's signature. Masscomp! Wow!
That's a blast from the past. As far as I know, that operating
system hasn't been supported for more than 20 years.
(extract_link, apply_delayed_links):
Use linkat rather than link.
(extract_symlink, apply_delayed_links):
Use symlinkat rather than symlink.
(extract_node): Use mknodat rather than mknod.
(extract_fifo): Use mkfifoat rather than mkfifo.
(apply_delayed_links): Use unlinkat rather than unlink or rmdir.
* src/misc.c (safer_rmdir, remove_any_file): Likewise.
* src/unlink.c (flush_deferred_unlinks): Likewise.
* src/extract.c (rename_directory): Use renameat rather than rename.
* src/misc.c (maybe_backup_file, undo_last_backup): Likewise.
* src/misc.c: Don't include <save-cwd.h>; no longer needed now
that we're using openat etc.
(struct wd): Add member fd. Remove members err and fd. All uses
changed.
(CHDIR_CACHE_SIZE): New constant.
(wdcache, wdcache_count, chdir_fd): New vars.
(chdir_do): Use openat rather than save_cwd. Keep the cache up
to date. This code won't scale well, but is good enough for now.
* src/update.c (update_archive): Use openat + fdopendir +
streamsavedir rather than savedir.
This file is a placeholder. It will be replaced with the actual ChangeLog
by make dist. Run make ChangeLog if you wish to create it earlier.
* src/common.h (must_be_dot_or_slash): New decl.
* src/extract.c (mark_after_links): New function, taking code
that used to be in create_placeholder_file.
(create_placeholder_file): Use it.
(delay_set_stat): Always delay setting status for . and /.
* src/misc.c (must_be_dot_or_slash): Now extern.
* tests/extrac12.at: New file.
* tests/Makefile.am (TESTSUITE_AT): Add it.
* tests/testsuite.at: Likewise.
* NEWS: Note the change. Mention dirfd and fdopendir.
* gnulib.modules: Add dirfd and fdopendir. The code was already
using fdopendir; dirfd is a new need.
* src/common.h (open_searchdir_flags, get_directory_entries):
(subfile_open, restore_parent_fd, tar_stat_close): New decls.
(check_exclusion_tags): Adjust signature to match code change.
* src/create.c (IMPOSTOR_ERRNO): New constant.
(check_exclusion_tags): First arg is now a struct tar_stat_info
const *, not an fd. All callers changed.
(dump_regular_file, dump_file0): A zero fd represents an unused
slot, so play it safe if the fd member is zero here. A negative
fd represents the negation of an errno value, so play it safe and
do not assign -1 to fd merely because an open fails.
(open_failure_recover, get_directory_entries, restore_parent_fd):
(subfile_open): New functions. These help to recover from file
descriptor exhaustion.
(dump_dir, dump_file0): Use them.
(dump_file0): Use tar_stat_close instead of rolling our own close.
* src/incremen.c (scan_directory): Use get_directory_entries,
subfile_open, etc., to recover from file descriptor exhaustion.
* src/names.c (add_hierarchy_to_namelist): Likewise.
(collect_and_sort_names): A negative fd represents the negation
of an errno value, so play it safe and do not assign -1 to fd.
* src/tar.c (decode_options): Set open_searchdir_flags.
Add O_CLOEXEC to all the open flags.
(tar_stat_close): New function, which knows how to deal with
new convention for directory streams and file descriptors.
Diagnose 'close' failures.
(tar_stat_destroy): Use it.
* src/tar.h (struct tar_stat_info): New member dirstream.
fd now has the negative of an errno value, not merely -1, if
the file could not be opened, so that failures to reopen directories
are better-diagnosed later.
* tests/Makefile.am (TESTSUITE_AT): Add extrac11.at.
* tests/testsuite.at: Likewise.
* tests/extrac11.at: New file.
* NEWS: Document this.
* gnulib.modules: Add openat, readlinkat.
* src/common.h (open_read_flags, fstatat_flags): New global variables.
(cachedir_file_p, dump_file, check_exclusion_tags, scan_directory):
Adjust to new signatures, described below.
(name_fill_directory): Remove.
* src/compare.c (diff_file, diff_multivol): Use open_read_flags.
* src/create.c (struct exclusion_tag): Exclusion predicates now take
a file descriptor, not a file name.
(add_exclusion_tag): Likewise. All uses changed.
(cachedir_file_p): Likewise.
(check_exclusion_tags): The directory is now a file descriptor,
not a file name. All uses changed. Use openat for better traversal.
(file_dumpable_p): Arg is now a struct stat, not a struct
tar_stat_info. All uses changed. Check the arg's file types too.
(dump_dir0, dump_dir, dump_file0, dump_file): Omit top_level and
parent_device args, since st->parent tells us that now. All uses
changed.
(dump_dir): Likewise. Also, omit fd arg for similar reasons.
Apply fdsavedir to a dup of the file descriptor, since we need a
file descriptor for openat etc. as well, and fdsavedir (perhaps
unwisely) consumes its file descriptor when successful.
Do not consume st->fd when successful; this simplifies the caller.
(create_archive): Allocate a file descriptor when retraversing
a directory, during incremental dumps.
(dump_file0): Use fstatat, openat, and readlinkat for better traversal.
When opening a file, use the result of fstat on the file descriptor
rather than the fstatat on the directory entry, to avoid some race
conditions. No need to reopen the directory since we now no longer
close it. Change "did we open the file?" test from 0 <= fd to
0 < fd since fd == 0 now represents uninitialized.
(dump_file): Now accepts struct tar_stat_info describing parent,
not parent_device. Also, accept basename and fullname of entry.
All uses changed.
* src/incremen.c (update_parent_directory): Accept struct
tar_stat_info for parent, not name. All callers changed.
Use fstatat for safer directory traversal.
(procdir): Accept struct tar_stat_info, not struct stat and
dev_t, for info about directory. All callers changed.
(scan_directory): Accept struct tar_stat_info, not name,
device, and cmdline, for info about directory. All callers
changed. Do not consume the file descriptor, since caller
might need it. Use fstatat and openat for safer directory
traversal; also, use fstat after opening to double-check.
(name_fill_directory): Remove.
* src/names.c (add_hierarchy_to_namelist): Accept struct
tar_stat_info instead of device and cmdline. All callers changed.
When descending into a subdirectory, use openat and fstat for
safer directory traversal.
(collect_and_sort_names): Use open and fstat for safer directory
traversal. Set up struct tar_stat_info for callee's new API.
* src/tar.c (decode_options): Initialize open_read_flags
and fstatat_flags.
(tar_stat_destroy): Close st->fd if it is positive (not zero!).
* src/tar.h (struct tar_stat_info): New members parent, fd.
* src/update.c (update_archive): Adjust to dump_file's API change.
* tests/filerem02.at: Ignore stderr since its contents now depend
on the file system implementation.
* tests/extrac07.at, tests/extrac09.at, tests/listed03.at: Use
AT_UNPRIVILEGED_PREREQ, since this test requires non-root
privileges.
* tests/extrac07.at: Don't use "chmod -w", as POSIX says it's not
portable to start a chmod permissions-list with "-" as it may be
confused with an option. Use "chmod a-w" instead.
* src/common.h (chdir_current): New decl.
* src/extract.c (struct delayed_set_stat, struct delayed_link):
New member change_dir.
(delay_set_stat, create_placeholder_file): Set it.
(apply_nonancestor_delayed_set_stat, apply_delayed_links): Use it.
(extract_link): Check that the links are all relative to the same
directory.
(extract_archive): Restore the current directory after
apply_nonancestor_delayed_set_stat has possibly changed it.
* src/misc.c (chdir_current): New external var; this used to
be the private static variable 'previous' inside chdir_dir.
All uses changed.
* tests/Makefile.am (TESTSUITE_AT): New test extrac10.at.
* tests/extrac10.at: New file.
* tests/testsuite.at: Include it.
This patch was inspired by the following patch that addressed a
similar problem in GNU coreutils du:
http://git.savannah.gnu.org/gitweb/?p=coreutils.git;h=efe53cc72b599979ea292754ecfe8abf7c839d22
* src/common.h (name_count): New decl.
* src/create.c (trivial_link_count): New static var.
(create_archive): Initialize it.
(dump_hard_link, file_count_links): Use it, so that files with
link count 1 are handled correctly when they are found multiple times.
* src/names.c (allocated_entries): Renamed from allocated_names,
since the identifier's name was misleading. All uses changed.
(entries): Renamed from names. All uses changed.
(scanned): Renamed from name_index. All uses changed.
(name_count): New var.
(name_add_name): Increment it.
* tests/link04.at: New file.
* tests/testsuite.at: Add it.
* tests/Makefile.am (TESTSUITE_AT): Likewise.
* src/misc.c (struct wd): Rename 'saved' to 'err', with new semantics.
(chdir_arg, chdir_do): Adjust to new semantics. Do not report an
error merely because save_cwd fails; report an error only if
save_cwd's result is needed later.
* tests/extrac09.at: New file, to test for bug that was fixed.
* tests/testsuite.at: Include it.
* tests/Makefile.am (TESTSUITE_AT): Add it.
* src/extract.c: Don't include xgetcwd.h.
(extract_dir): stat "." rather than statting getcwd's output.
* src/misc.c (normalize_filename_x): Rewrite so as not to resolve
/../, which can't be done reliably in the presence of symlinks.
Don't reject valid names such as ".".
(normalize_filename): Don't make it absolute; that way, we don't
have to invoke xgetcwd which might fail. Don't bother to realloc
at the end, since that uses time and now saves little space.
(chdir_do): Don't crash if xgetcwd fails.
* tests/Makefile.am (TESTSUITE_AT): Add listed03.at.
* tests/listed03.at: New file.
* tests/testsuite.at: Include listed03.at.
* tests/extrac07.at: Fix a typo (invalid number
of arguments before format list).
* tests/link02.at: Use `ln' instead of `link'.
* tests/link03.at: Likewise.
Tar --remove-files relied on canonicalize_file_name,
which replaces symlinks in file name components with
the directories they point to. Due to this, tar
effectively ignored existence of symbolic links and
was unable to remove a directory that contained any
(Alexander Kozlov <akozlov@nada.kth.se>, 2010-03-15).
* gnulib.modules: Remove canonicalize.
* src/misc.c (normalize_filename): Rewrite
from scratch. The function operates only on
its input string, it makes no attempt to test
components for existence or to resolve symbolic
links.
* tests/Makefile.am (TESTSUITE_AT): Add remfiles03.at.
* tests/testsuite.at: Likewise.
* tests/remfiles03.at: New test case.
* NEWS: Update.
* doc/tar.texi (Including a Label in the Archive): Revise
the section.
* NEWS: Update
* src/buffer.c (open_archive): Check volume label on
ACCESS_UPDATE as well.
* src/list.c (test_archive_label): Rewrite to match the
documentation.
* src/names.c (regex_usage_warning): Return int.
(names_notfound): Rewrite the conditional.
(label_notfound): New function.
* tests/label03.at: New testcase.
* tests/label04.at: New testcase.
* tests/label05.at: New testcase.
* tests/Makefile.am: Add new testcases.
* tests/testsuite.at: Likewise.
* src/common.h (read_header_mode): New enum.
(read_header): Change type of the 3rd argument.
* src/list.c (read_header): Change type of the 3rd argument.
All callers updated.
* src/buffer.c (try_new_volume): Allow for volumes split at the
extended/ustar header boundary. This is against POSIX specs, but
we must be able to read such archives anyway.
* tests/multiv07.at: New test case.
* tests/Makefile.am: Add multiv07.at
* tests/testsuite.at: Likewise.
* src/compare.c: Update calls to read_header.
* src/delete.c: Likewise.
* src/update.c: Likewise.
* src/buffer.c (match_volume_label): Call set_volume_label.
(check_label_pattern): Get label string
as argument.
(match_volume_label): Handle volume labels stored in
global PAX headers.
* src/common.c (print_header,read_header): Change signature.
(read_header_primitive): Remove prototype.
* src/list.c (recent_global_header): New static.
(list_archive): Always print volume labels.
(read_header_primitive): Remove.
(read_header): Change the signature (all callers updated)
Save the recent global header.
(volume_label_printed): New static.
(simple_print_header): New function (ex-print_header).
(print_header): Change the signature (all callers updated).
For POSIX formats, print first volume header (if set).
* src/xheader.c (xheader_write_global): Write the data
accumulated in xhdr->stk even if keyword_global_override_list
is empty.
(xheader_read): On unexpected EOF, report error instead of
coredumping.
(XHDR_PROTECTED, XHDR_GLOBAL): New defines.
(struct xhdr_tab): Remove `protected' with `flags'. All uses updated.
(decg): If XHDR_GLOBAL bit is set, call the keyword's decode
method instead of adding it to `kwl'.
* src/compare.c: Update calls to read_header.
* src/create.c: Likewise.
* src/delete.c: Likewise.
* src/update.c: Likewise.
* src/extract.c: Likewise.
(extract_volhdr): Do not print "Reading <label>" statement, because
it is inconsistent: it is not printed if the volume begins with a
member continued from the previous volume.
* tests/label01.at: New testcase.
* tests/label02.at: New testcase.
* tests/Makefile.am, tests/testsuite.at: Add new testcases.
* src/common.h (namebuf_t): New typedef.
(namebuf_create, namebuf_free)
(namebuf_name): New prototypes.
(remname): New prototype.
* src/misc.c (struct namebuf): New structure.
(namebuf_create, namebuf_free)
(namebuf_name): New functions.
* src/create.c (dup_dir0): Remove is_avoided_name
checks. This is taken care of in update_archive.
* src/incremen.c (scan_directory): Use namebuf
to produce full file names.
* src/names.c (nametail): Remove extra level of
indirection. All uses updated.
(avoided_name_table, add_avoided_name)
(is_avoided_name): Remove.
* src/update.c (update_archive): Change algorithm.
Instead of adding unmodified files to the avoided_name
table, create namelist so that it contains only
modified files.
* tests/Makefile.am: Add update01.at, update02.at
* tests/testsuite.at: Likewise.
* tests/update.at (AT_KEYWORDS): Add update00.
Make sure the files are deleted only if they were succesfully stored
to the archive.
* src/exit.c: New file.
* src/unlink.c: New file.
* src/Makefile.am (tar_SOURCES): Add exit.c and unlink.c.
* src/common.h: Include progname.h
(program_name): Remove global.
(records_written): New extern.
(queue_deferred_unlink, finish_deferred_unlinks): New prototypes.
(fatal_exit_hook): New extern.
* src/create.c (create_archive): Call finish_deferred_unlinks.
(dump_hard_link, dump_file0): Don't actually unlink the file,
queue it to deferred_unlinks instead.
* src/delete.c (records_written): Remove extern: declared in
common.h.
* src/extract.c (extract_archive): Set fatal_exit_hook.
(fatal_exit, xalloc_die): Move to exit.c
* src/system.c (sys_wait_for_child): Exit immediately
if the child dies or exits with a non-zero status.
(sys_child_open_for_compress)
(sys_child_open_for_uncompress): Use set_program_name,
instead of setting program_name directly.
* src/tar.c (main): Use set_program_name,
instead of setting program_name directly.
* tests/Makefile.am (TESTSUITE_AT): Add remfiles01.at
and remfiles02.at.
* tests/testsuite.at: Likewise.
* tests/gzip.at: Reflect the above changes.
See tests/append02.at for a detailed description
* src/common.h (MODE_FROM_HEADER): Take additional argument.
(mode_from_header): Likewise.
* src/create.c (mode_to_chars): Store all mode bits if
using OLDGNU_FORMAT. This reverses f4e4adea80.
* src/list.c (decode_header): Use header mode field
to discern between GNU and OLDGNU formats.
(mode_from_header): Store unrecognized mode bits (from 10th up)
in the location pointed to by the third parameter.
* tests/append02.at: Update documentation and references.
* src/incremen.c (read_directory_file): Execute eventual -C dir
after opening the snapshot file.
(collect_and_sort_names): Remove call to chdir_do
* tests/incr05.at, tests/incr06.at: Use relative file names for
snapshot files.
* src/names.c (is_pattern): Remove.
(regex_usage_warning): Use fnmatch_pattern_has_wildcards instead of
is_pattern.
* src/tar.c: New option --exclude-backups.
(vcs_file_table, backup_file_table): New globals.
(add_exclude_array): New function.
* tests/exclude01.at, tests/exclude02.at,
tests/exclude03.at, tests/exclude04.at,
tests/exclude05.at: New testcases. Supplied by Phil Proudman.
* tests/Makefile.am (TESTSUITE_AT): Add new tests.
* tests/testsuite.at: Add new tests.
* THANKS: Update.
