* gnulib.modules: Add assert-h, for static_assert.
* src/common.h, src/list.c, src/misc.c:
Prefer static_assert to #if + #error. This doesn’t fix any bugs; it’s
just that in general it’s better to avoid the preprocessor.
* gnulib.modules: Add reallocarray.
* lib/wordsplit.c: Include stdckdint.h.
(ISDELIM, expvar, isglob, scan_word):
Defend against strchr (s, 0) always succeeding.
(alloc_space, wsplit_assign_vars):
Fix some unlikely integer overflows, partly by using reallocarray.
(alloc_space): Avoid quadratic worst-case behavior.
(isglob): Return bool, not int. Accept size_t, not int.
(to_num): Remove; no longer used.
(xtonum): Clarify the code the bit. Rely on portable
conversion to unsigned char rather than problematic pointer cast.
* gnulib.modules: Add errno, limits-h, safe-read, sys_stat.
Not sure about the relationship between gnulib.modules
and paxutils/gnulib.modules, but anyway tar itself uses
these so we should depend on them. (Perhaps it would be
better if there was just one Gnulib module list for tar;
that would be less confusing.)
* gnulib.modules: Add stddef, for ‘unreachable’.
* src/compare.c (dumpdir_cmp): Tell GCC that the default case
is unreachable. Make just one pass through the string,
instead of two passes (one via strcmp, another via strlen).
* configure.ac: Omit stuff no longer needed now that Gnulib or
paxlib does it, or the code no longer needs the configure-time checks.
Do not use AC_SYS_LARGEFILE (Gnulib largefile does this) or check
for fcntl.h, memory.h, net/errno.h, sgtty.h, string.h,
sys/param.h, sys/device.h, sys/gentape.h, sys/inet.h,
sys/io/trioctl.h, sys/time.h, sys/tprintf.h, sys/tape.h, unistd.h,
locale.h, netdb.h; these are all now standard, or old ways of getting
at magtapes are no longer needed and we now have only sys/mtio.h.
Do not check for lstat, readlink, symlink, and check only for
waitpid’s existence rather than attempting to replace it.
Do not check for decls of getgrgid, getpwuid, or time.
Check just once for iconv.h.
* gnulib.modules: Add largefile.
* lib/.gitignore, lib/Makefile.am (noinst_HEADERS, libtar_a_SOURCES):
Remove system-ioctl.h, which is no longer in paxlib.
All includes now changed to just check HAVE_SYS_MTIO_H directly.
* lib/wordsplit.c (wordsplit_c_escape_tab, wordsplit_errstr)
(wordsplit_nerrs):
Now static or an enum, and without any leading "_" in the name.
* src/buffer.c (record_start, record_end, current_block, records_read):
* src/delete.c (records_skipped): Add extern decl to pacify GCC.
* src/compare.c, src/create.c, src/extract.c: Omit uses of
HAVE_READLINK and HAVE_SYMLINK since we now let Gnulib deal with
platforms lacking readlinkat and symlinkat.
* src/system.c: Use "#if !HAVE_WAITPID" instead of "#if MSDOS".
Support upcasing and downcasing in multi-byte locales.
* gnulib.modules: Add c32rtomb, c32tolower, c32toupper,
mbrtoc32-regular.
* src/transform.c: Do not include ctype.h. Include mcel.h.
(stk, stk_init): Move up.
(run_case_conv): Return void, not char *. Append result to
stk directly; this avoids the need for a separate allocation.
All callers changed. Do not assume a single-byte locale.
* tests/xform04.at: New test.
* tests/Makefile.am (TESTSUITE_AT):
* tests/testsuite.at: Add it.
update submodules to latest
* gnulib.modules: Add c-ctype.
* lib/wordsplit.c, src/buffer.c, src/exclist.c, src/incremen.c:
* src/list.c, src/misc.c, src/names.c, src/sparse.c, src/tar.c:
* src/xheader.c:
Include c-ctype.h, and use its API rather than ctype.h’s.
This is more likely to work when oddball locales are used.
* src/transform.c: Include ctype.h, since this module still uses
tolower and toupper (this is probably wrong - should be multi-byte).
Prefer the lighter-weight mcel implementation to the heavier-weight
mbuiter that GNU tar does not need.
* bootstrap.conf (avoided_gnulib_modules): Avoid mbuiter, mbuiterf.
* gnulib.modules: Add mcel-prefer.
* gnulib.modules: Remove alloca.
* src/create.c (dump_file0): Return address of any allocated
storage. Caller changed to free it. Use xmalloc instead
of alloca, to obtain this storage.
* src/list.c (from_header): Use quote_mem instead of quote,
removing the need to use alloca.
Portability bug caught by GCC 13 -fstrict-flex-arrays.
* gnulib.modules: Add flexmember.
* src/create.c (struct link):
* src/exclist.c (struct excfile):
* src/extract.c (struct delayed_link, struct string_list):
Include <flexmember.h>. Use FLEXIBLE_ARRAY_MEMBER, for
portability to strict C99 or later. All storage
allocations changed to use FLEXNSIZEOF.
This simplifies code that would otherwise use dup and close.
* gnulib.modules: Add dup2.
* src/system.c: Add #pragma to pacify GCC 13.
(xdup2): Simplify by using dup2.
* acinclude.m4, configure.ac:
Use AS_HELP_STRING, not AC_HELP_STRING.
* bootstrap: Sync from Gnulib.
* configure.ac: Require Autoconf 2.71 and Gettext 0.21.
Use AC_PROG_CC, not AC_PROG_CC_STDC.
Prefer AC_COMPILE_IFELSE to AC_TRY_COMPILE.
Use AC_CONFIG_FILES.
* gnulib.modules: Use gettext-h, not gettext.
Fedora 33 uses GCC 10.2.1, which is a bit pickier.
* configure.ac: Do not use -Wsystem-headers, as this
runs afoul of netdb.h on Fedora 33.
* gnulib.modules: Add ‘attribute’.
* lib/wordsplit.c (wsnode_new): Return the newly allocated
pointer instead of a boolean, to pacify GCC 10.2.1 which otherwise
complains about use of possibly-null pointers. All uses changed.
* src/buffer.c (try_new_volume): Don’t assume find_next_block succeeds.
(_write_volume_label): Pacify GCC 10.2.1 with an ‘assume’, since
LABEL must be nonnull here.
* src/common.h (FALLTHROUGH): Remove; now in attribute.h.
Include attribute.h, for ATTRIBUTE_NONNULL.
* src/misc.c (assign_string_or_null): New function,
taking over the old role of assign_string.
(assign_string): Assume VALUE is non-null.
(assign_null): New function, taking over the old
role of assign_string when its VALUE was nonnull.
All callers of assign_string changed to use these functions.
(assign_string_n): Clear *STRING if VALUE is null,
to fix a potential double-free.
The auxiliary utility ttyemu proved to be unreliable. Given existing
differences between pty implementations and termios ioctls on various
platforms, writing it in a portable way requires effort disproportional
to its actual purpose.
* configure.ac: Remove check for grantpt
* gnulib.modules: Remove posix_openpt, ptsname, and unlockpt
* tests/Makefile.am (TESTSUITE_AT): Remove iotty.at
(check_PROGRAMS): Remove ttyemu.
* tests/testsuite.at: Remove iotty.at
* tests/iotty.at: Remove.
* tests/ttyemu.c: Remove.
Problem reported by Tobias Stoeckmann in:
http://lists.gnu.org/archive/html/bug-tar/2015-07/msg00004.html
* gnulib.modules: Add areadlinkat-with-size.
* src/create.c: Include areadlink.h.
(dump_file0): Use areadlinkat_with_size, rather than trying to do
it by hand, incorrectly. This also avoids assumption that
the symlink contents fit on the stack. Also, use the transformed
link name, not the original link name, when deciding whether the
name is long enough to require writing a long link.
* configure.ac (TAR_COND_GRANTPT): Define conditional depending
on whether grantpt is available.
* gnulib.modules: Remove grantpt. It relies upon a helper binary
pt_chown which it installs and which is useless in the testsuite.
* tests/Makefile.am [TAR_COND_GRANTPT]: Build ttyemu
* tests/iotty.at: Skip test if ttyemu is not build.
* tests/ttyemu.c (noecho): Fix error message
(main): Use TIOCSCTTY if it is defined.
Based on patch from Pavel Raiskup <praiskup@redhat.com>.
* gnulib.modules: Add new modules.
* src/buffer.c (_open_archive): Refuse to read archive from a tty.
* tests/Makefile.am (TESTSUITE_AT): Add iotty.at
(check_PROGRAMS): New program ttyemu
* tests/testsuite.at: Include iotty.at
* tests/iotty.at: New file.
* tests/ttyemu.c: New file.
* NEWS: Update.
* configure.ac: Version 1.27.90
* gnulib.modules: Add fprintftime.
* doc/tar.texi: Document the "totals" action and new format specifiers
for echo and ttyout checkpoint actions.
* src/buffer.c (compute_duration): Return computed value.
(print_stats): Don't print trailing newline. Return number of
characters output.
(format_total_stats): New function.
(print_total_stats): Rewrite via format_total_stats.
* src/checkpoint.c (checkpoint_opcode) <cop_totals>: New opcode.
(checkpoint_compile_action): Handle cop_totals.
(expand_checkpoint_string): Remove.
(format_checkpoint_string): New function to be used instead of
expand_checkpoint_string. All callers updated.
* src/common.h (TF_READ,TF_WRITE)
(TF_DELETED): New constants.
(format_total_stats,print_total_stats): New protos.
Original problem reported for HP-UX LVM v2.2 by Michael White in
<http://lists.gnu.org/archive/html/bug-tar/2012-10/msg00000.html>.
This patch fixes some other gotchas that I noticed.
* gnulib.modules: Add extern-inline.
* src/common.h: Use _GL_INLINE_HEADER_BEGIN, _GL_INLINE_HEADER_END.
(COMMON_INLINE, max, min): New macros.
(represent_uintmax, valid_timespec): New inline functions.
(SYSINT_BUFSIZE): New constant.
(sysinttostr, strtosysint, decode_timespec): New decls.
* src/create.c (start_private_header): Silently bring the time_t
value into range; it is now the caller's responsibility to deal
with any overflow error. Use uid 0 and gid 0 rather than the
user's uid/gid, since the faked header isn't "owned" by the user
and the uid/gid could in theory be out of range. Leave major and
minor zeroed.
(FILL): Remove.
(write_gnu_long_link): Let start_private_header zero things out.
* src/create.c (write_gnu_long_link, write_extended):
* src/xheader.c (xheader_write_global):
Use start_time, not current time; no point hammering on the clock.
* src/compare.c (diff_multivol): Check that offset, size are in range.
* src/incremen.c (read_incr_db_01, write_directory_file_entry):
Allow negative time_t, dev_t, and ino_t.
* src/list.c (max): Remove (moved to common.h).
(read_header): Check that size is in range.
(from_header): Return intmax_t, not uintmax_t, to allow negative.
All callers changed. At compile time, check assumptions about
intmax_t and uintmax_t. Use bool for booleans. Avoid overflow
hassles on picky hosts.
(mode_from_header): Last arg is now bool *, not unsigned *.
All callers changed.
(simple_print_header): Do not assume UID, GID fit in 'long'.
* src/list.c (from_header):
* src/xheader.c (out_of_range_header):
Arg is now a plain minimum value, not minus minval converted to
uintmax_t. All callers changed.
* src/misc.c (COMMON_INLINE): New macro.
(sysinttostr, strtosysint, decode_timespec): New functions.
* src/sparse.c (oldgnu_add_sparse, oldgnu_fixup_header)
(star_fixup_header):
Check for offset overflow.
(decode_num): Clear errno before calling strtoumax.
* src/tar.c (expand_pax_option): Don't discard nanoseconds.
* src/xheader.c (assign_time_option): Allow negative time_t.
(decode_record): Simplify, since out-of-range string is guaranteed
to produce a value exceeding len_max.
(xheader_read): Last arg is off_t, not size_t.
Caller should diagnose negative arg, as needed.
Check that it's in range.
(enum decode_time_status): Remove.
(_decode_time): Remove, folding into decode_time.
(decode_time): Return bool, not enum decode_time_status.
Rely on decode_timespec to do most of the work.
(code_signed_num): New function.
(code_num): Use it.
(decode_signed_num): New function.
(decode_num): Use it.
(gid_coder, gid_decoder, uid_coder, uid_decoder, sparse_map_decoder)
(sparse_map_decoder): Code and decode negative values.
(sparse_map_decoder): Improve check for out-of-range values.
* tests/time01.at: New file.
* tests/Makefile.am (TESTSUITE_AT): Add it.
* tests/testsuite.at: Include it.
* gnulib.modules (fchmodat, fchownat, fstatat, mkdirat, unlinkat):
Add. These were split out in gnulib, so we now need to request
them separately. mkdirat, for example, is not in Solaris 10.
This has a similar meaning as in other GNU applications
such as coreutils and Emacs.
* NEWS: Document it.
* .gitignore: Remove redundant build-aux.
Remove gnu, since gnu/Makefile.am is now in git.
Add gnu/.gitignore, gnu/charset.alias, gnu/*.h, gnu/*/ to cover
autogenerated files.
* bootstrap.conf (gnulib_mk): Remove.
* configure.ac: Add support for --enable-gcc-warnings,
taken from coreutils and simplified.
* gnu/Makefile.am: New file. Formerly this was autogenerated,
but the autogenerated file has been renamed to gnulib.mk,
its usual name when bootstrapping from gnulib.
This way, AM_CFLAGS can incorporate warning options.
* gnulib.modules: Add manywarnings.
* lib/Makefile.am, src/Makefile.am (AM_CFLAGS): New macro,
incorporating warning options.
* lib/attr-xattr.in.h (ENOATTR): New macro, if not already defined.
* src/buffer.c (magic): Don't rely on incomplete initializers.
* src/common.h (report_difference): Add printf format attribute.
* src/system.c (sys_exec_command, sys_exec_info_script)
(sys_exec_checkpoint_script):
* src/tar.c (update_argv):
Add casts to char * to pacify GCC warnings about using string
literals in a char * context.
* src/xattrs.c, src/xattrs.h (xattrs_clear_setup):
Declare parameters as (void), not ().
* src/xheader.c (xheader_format_name): Initialize pptr to null,
to pacify GCC. Remove unnecessary test of nptr versus null.
* configure.ac: Check whether ACLs are available on the
host system.
* gnulib.modules: Add acl
* src/create.c (start_header): Store ACLs when creating
a POSIX archive.
(dump_file0): Handle ACLs.
* src/extract.c (delayed_set_stat) <acls_a_ptr, acls_a_len>
<acls_d_ptr, acls_d_len>: New members.
(delayed_link): Likewise.
(set_stat,delay_set_stat)
(apply_nonancestor_delayed_set_stat): Set ACLs.
* src/tar.c: New options: "--acls", "--no-acls"
(tar_stat_destroy): Free acls_a_ptr and acls_d_ptr fields.
* src/tar.h (tar_stat_info) <acls_a_ptr, acls_a_len>
<acls_d_ptr, acls_d_len>: New members.
* src/xattrs.c (xattrs_acls_get, xattrs_acls_set): New functions.
* src/xheader.c: Support new keywors: "SCHILY.acl.access" and
"SCHILY.acl.default".
* tests/Makefile.am: Add new tests.
* tests/testsuite.at: Likewise.
* tests/acls01.at: New test.
* tests/acls02.at: New test.
This is not true for Tandem NonStop Kernel. See Joachim Schmitz's
comment in <http://bugs.gnu.org/10305#111>.
* gnulib.modules: Add root-uid.
* src/extract.c: Include <root-uid.h>.
(extr_init): Don't assume root is uid 0.
Problem reported by Pino Toscano in
<http://lists.gnu.org/archive/html/bug-tar/2012-01/msg00040.html>.
* gnulib.modules: Add fcntl-h, which defines
HAVE_WORKING_O_NOFOLLOW.
* src/extract.c (open_output_file): Use HAVE_WORKING_O_NOFOLLOW,
not O_NOFOLLOW, when testing whther O_NOFOLLOW works.
This file is a placeholder. It will be replaced with the actual ChangeLog
by make dist. Run make ChangeLog if you wish to create it earlier.
Without this change, if tar tried to extract a file A/B/C, noticed
that A/B didn't exist, attempted to mkdir A/B, and the mkdir
failed, it did not diagnose the mkdir failure, but simply reported
the failure to open A/B/C. This sometimes led to confusion
because it wasn't clear what tar was trying to do, in particular
that tar tried to mkdir A/B. With this patch, tar issues two
diagnostics in this case: one for A/B and the other for A/B/C.
Problem reported by Hauke Laging in
<http://lists.gnu.org/archive/html/bug-tar/2010-10/msg00020.html>.
* gnulib.modules: Remove faccessat.
* src/extract.c (make_directories): New arg INTERDIR_MADE.
Diagnose mkdir failure. Return 0 on success, nonzero on failure,
as opposed to nonzero iff some directory was created. All callers
changed. Simplify the code when mkdir fails, by checking whether
the desired file exists unless errno==EEXIST: this is more robust.
* tests/extrac15.at: New test, to check this.
* tests/Makefile.am (TESTSUITE_AT): Add it.
* tests/testsuite.at: Include it.
* bootstrap: Sync from gnulib.
* doc/.gitignore: Rename getdate.texi to parse-datetime.texi.
* doc/Makefile.am (tar_TEXINFOS): Likewise.
* doc/tar.texi (Top): Adjust to renaming of getdate to parse-datetime.
* gnulib.modules: Likewise. Also, remove ftruncate (now obsolete).
And add inttostr (we missed this dependency).
* src/tar.c: Include parse-datetime.h, not getdate.h. All calls
to get_date replaced with parse_datetime.
This change replaces traditional functions like 'open' with the
POSIX.1-2008 functions like 'openat'. Mostly this is an internal
refactoring change, in preparation for further changes to close
some races.
* gnulib.modules: Add faccessat, linkat, mkfifoat, renameat, symlinkat.
Remove save-cwd.
* src/Makefile.am (tar_LDADD): Add $(LIB_EACCESS).
* tests/Makefile.am (LDADD): Likewise.
* src/common.h (chdir_fd): New extern var.
* src/compare.c (diff_file, diff_multivol): Use openat instead of open.
* src/create.c (create_archive, restore_parent_fd): Likewise.
* src/extract.c (create_placeholder_file): Likewise.
* src/names.c (collect_and_sort_names): Likewise.
* src/update.c (append_file): Likewise.
* src/compare.c (diff_symlink): Use readlinkat instead of readlink.
* src/compare.c (diff_file): Use chdir_fd instead of AT_FDCWD.
* src/create.c (subfile_open, dump_file0): Likewise.
* src/extract.c (fd_chmod, fd_chown, fd_stat, set_stat):
(repair_delayed_set_stat, apply_nonancestor_delayed_set_stat):
Likewise.
* src/extract.c (mark_after_links, file_newer_p, extract_dir):
(extract_link, apply_delayed_links):
Use fstatat rather than stat or lstat.
* src/misc.c (maybe_backup_file, deref_stat): Likewise.
* src/extract.c (make_directories): Use mkdirat rather than mkdir.
Use faccessat rather than access. This fixes a minor permissions
bug when tar is running setuid (who would want to do that?!).
(open_output_file): Use openat rather than open.
In the process, this removes support for Masscomp's O_CTG files,
which aren't compatible with openat's signature. Masscomp! Wow!
That's a blast from the past. As far as I know, that operating
system hasn't been supported for more than 20 years.
(extract_link, apply_delayed_links):
Use linkat rather than link.
(extract_symlink, apply_delayed_links):
Use symlinkat rather than symlink.
(extract_node): Use mknodat rather than mknod.
(extract_fifo): Use mkfifoat rather than mkfifo.
(apply_delayed_links): Use unlinkat rather than unlink or rmdir.
* src/misc.c (safer_rmdir, remove_any_file): Likewise.
* src/unlink.c (flush_deferred_unlinks): Likewise.
* src/extract.c (rename_directory): Use renameat rather than rename.
* src/misc.c (maybe_backup_file, undo_last_backup): Likewise.
* src/misc.c: Don't include <save-cwd.h>; no longer needed now
that we're using openat etc.
(struct wd): Add member fd. Remove members err and fd. All uses
changed.
(CHDIR_CACHE_SIZE): New constant.
(wdcache, wdcache_count, chdir_fd): New vars.
(chdir_do): Use openat rather than save_cwd. Keep the cache up
to date. This code won't scale well, but is good enough for now.
* src/update.c (update_archive): Use openat + fdopendir +
streamsavedir rather than savedir.
This file is a placeholder. It will be replaced with the actual ChangeLog
by make dist. Run make ChangeLog if you wish to create it earlier.
