* Makefile: always pull image in proto-gen-docker. (#5953)
The `proto-gen-docker` target didn't pull an updated Docker image, and would use a local image if present which could be outdated and produce wrong results.
* test: fix TestPEXReactorRunning data race (#5955)
Fixes#5941.
Not entirely sure that this will fix the problem (couldn't reproduce), but in any case this is an artifact of a hack in the P2P transport refactor to make it work with the legacy P2P stack, and will be removed when the refactor is done anyway.
* test/fuzz: move fuzz tests into this repo (#5918)
Co-authored-by: Emmanuel T Odeke <emmanuel@orijtech.com>
Closes#5907
- add init-corpus to blockchain reactor
- remove validator-set FromBytes test
now that we have proto, we don't need to test it! bye amino
- simplify mempool test
do we want to test remote ABCI app?
- do not recreate mux on every crash in jsonrpc test
- update p2p pex reactor test
- remove p2p/listener test
the API has changed + I did not understand what it's tested anyway
- update secretconnection test
- add readme and makefile
- list inputs in readme
- add nightly workflow
- remove blockchain fuzz test
EncodeMsg / DecodeMsg no longer exist
* docker: dont login when in PR (#5961)
* docker: release Linux/ARM64 image (#5925)
Co-authored-by: Marko <marbar3778@yahoo.com>
* p2p: make PeerManager.DialNext() and EvictNext() block (#5947)
See #5936 and #5938 for background.
The plan was initially to have `DialNext()` and `EvictNext()` return a channel. However, implementing this became unnecessarily complicated and error-prone. As an example, the channel would be both consumed and populated (via method calls) by the same driving method (e.g. `Router.dialPeers()`) which could easily cause deadlocks where a method call blocked while sending on the channel that the caller itself was responsible for consuming (but couldn't since it was busy making the method call). It would also require a set of goroutines in the peer manager that would interact with the goroutines in the router in non-obvious ways, and fully populating the channel on startup could cause deadlocks with other startup tasks. Several issues like these made the solution hard to reason about.
I therefore simply made `DialNext()` and `EvictNext()` block until the next peer was available, using internal triggers to wake these methods up in a non-blocking fashion when any relevant state changes occurred. This proved much simpler to reason about, since there are no goroutines in the peer manager (except for trivial retry timers), nor any blocking channel sends, and it instead relies entirely on the existing goroutine structure of the router for concurrency. This also happens to be the same pattern used by the `Transport.Accept()` API, following Go stdlib conventions, so all router goroutines end up using a consistent pattern as well.
* libs/log: format []byte as hexidecimal string (uppercased) (#5960)
Closes: #5806
Co-authored-by: Lanie Hei <heixx011@umn.edu>
* docs: log level docs (#5945)
## Description
add section on configuring log levels
Closes: #XXX
* .github: fix fuzz-nightly job (#5965)
outputs is a property of the job, not an individual step.
* e2e: add control over the log level of nodes (#5958)
* mempool: fix reactor tests (#5967)
## Description
Update the faux router to either drop channel errors or handle them based on an argument. This prevents deadlocks in tests where we try to send an error on the mempool channel but there is no reader.
Closes: #5956
* p2p: improve peerStore prototype (#5954)
This improves the `peerStore` prototype by e.g.:
* Using a database with Protobuf for persistence, but also keeping full peer set in memory for performance.
* Simplifying the API, by taking/returning struct copies for safety, and removing errors for in-memory operations.
* Caching the ranked peer set, as a temporary solution until a better data structure is implemented.
* Adding `PeerManagerOptions.MaxPeers` and pruning the peer store (based on rank) when it's full.
* Rewriting `PeerAddress` to be independent of `url.URL`, normalizing it and tightening semantics.
* p2p: simplify PeerManager upgrade logic (#5962)
Follow-up from #5947, branched off of #5954.
This simplifies the upgrade logic by adding explicit eviction requests, which can also be useful for other use-cases (e.g. if we need to ban a peer that's misbehaving). Changes:
* Add `evict` map which queues up peers to explicitly evict.
* `upgrading` now only tracks peers that we're upgrading via dialing (`DialNext` → `Dialed`/`DialFailed`).
* `Dialed` will unmark `upgrading`, and queue `evict` if still beyond capacity.
* `Accepted` will pick a random lower-scored peer to upgrade to, if appropriate, and doesn't care about `upgrading` (the dial will fail later, since it's already connected).
* `EvictNext` will return a peer scheduled in `evict` if any, otherwise if beyond capacity just evict the lowest-scored peer.
This limits all of the `upgrading` logic to `DialNext`, `Dialed`, and `DialFailed`, making it much simplier, and it should generally do the right thing in all cases I can think of.
* p2p: add PeerManager.Advertise() (#5957)
Adds a naïve `PeerManager.Advertise()` method that the new PEX reactor can use to fetch addresses to advertise, as well as some other `FIXME`s on address advertisement.
* blockchain v0: fix waitgroup data race (#5970)
## Description
Fixes the data race in usage of `WaitGroup`. Specifically, the case where we invoke `Wait` _before_ the first delta `Add` call when the current waitgroup counter is zero. See https://golang.org/pkg/sync/#WaitGroup.Add.
Still not sure how this manifests itself in a test since the reactor has to be stopped virtually immediately after being started (I think?).
Regardless, this is the appropriate fix.
closes: #5968
* tests: fix `make test` (#5966)
## Description
- bump deadlock dep to master
- fixes `make test` since we now use `deadlock.Once`
Closes: #XXX
* terminate go-fuzz gracefully (w/ SIGINT) (#5973)
and preserve exit code.
```
2021/01/26 03:34:49 workers: 2, corpus: 4 (8m28s ago), crashers: 0, restarts: 1/9976, execs: 11013732 (21596/sec), cover: 121, uptime: 8m30s
make: *** [fuzz-mempool] Terminated
Makefile:5: recipe for target 'fuzz-mempool' failed
Error: Process completed with exit code 124.
```
https://github.com/tendermint/tendermint/runs/1766661614
`continue-on-error` should make GH ignore any error codes.
* p2p: add prototype PEX reactor for new stack (#5971)
This adds a prototype PEX reactor for the new P2P stack.
* proto/p2p: rename PEX messages and fields (#5974)
Fixes#5899 by renaming a bunch of P2P Protobuf entities (while maintaining wire compatibility):
* `Message` to `PexMessage` (as it's only used for PEX messages).
* `PexAddrs` to `PexResponse`.
* `PexResponse.Addrs` to `PexResponse.Addresses`.
* `NetAddress` to `PexAddress` (as it's only used by PEX).
* p2p: resolve PEX addresses in PEX reactor (#5980)
This changes the new prototype PEX reactor to resolve peer address URLs into IP/port PEX addresses itself. Branched off of #5974.
I've spent some time thinking about address handling in the P2P stack. We currently use `PeerAddress` URLs everywhere, except for two places: when dialing a peer, and when exchanging addresses via PEX. We had two options:
1. Resolve addresses to endpoints inside `PeerManager`. This would introduce a lot of added complexity: we would have to track connection statistics per endpoint, have goroutines that asynchronously resolve and refresh these endpoints, deal with resolve scheduling before dialing (which is trickier than it sounds since it involves multiple goroutines in the peer manager and router and messes with peer rating order), handle IP address visibility issues, and so on.
2. Resolve addresses to endpoints (IP/port) only where they're used: when dialing, and in PEX. Everywhere else we use URLs.
I went with 2, because this significantly simplifies the handling of hostname resolution, and because I really think the PEX reactor should migrate to exchanging URLs instead of IP/port numbers anyway -- this allows operators to use DNS names for validators (and can easily migrate them to new IPs and/or load balance requests), and also allows different protocols (e.g. QUIC and `MemoryTransport`). Happy to discuss this.
* test/p2p: close transports to avoid goroutine leak failures (#5982)
* mempool: fix TestReactorNoBroadcastToSender (#5984)
## Description
Looks like I missed a test in the original PR when fixing the tests.
Closes: #5956
* mempool: fix mempool tests timeout (#5988)
* p2p: use stopCtx when dialing peers in Router (#5983)
This ensures we don't leak dial goroutines when shutting down the router.
* docs: fix typo in state sync example (#5989)
Co-authored-by: Erik Grinaker <erik@interchain.berlin>
Co-authored-by: Anton Kaliaev <anton.kalyaev@gmail.com>
Co-authored-by: Marko <marbar3778@yahoo.com>
Co-authored-by: odidev <odidev@puresoftware.com>
Co-authored-by: Lanie Hei <heixx011@umn.edu>
Co-authored-by: Callum Waters <cmwaters19@gmail.com>
Co-authored-by: Aleksandr Bezobchuk <alexanderbez@users.noreply.github.com>
Co-authored-by: Sergey <52304443+c29r3@users.noreply.github.com>
## Description
add make build-linux into `make build-docker` it is not documented that the cmd depends on the build folder so this aids in helping the user.
Closes: #XXX
* fix#5086
* fixes#5082
- run tendermint init on runtime (if necessary)
* Address some feedback:
- restrict the entrypoint to only run `tendermint`
- script into /usr/local/bin
* make it also possible to run ``ith unmodified config again via:
`docker run -v $HOME/.tendermint:/tendermint tendermint/tendermint init
* Update DOCKER/docker-entrypoint.sh
Co-authored-by: Greg Szabo <16846635+greg-szabo@users.noreply.github.com>
Co-authored-by: Greg Szabo <16846635+greg-szabo@users.noreply.github.com>
Reduce the number of targets and make the buildsystem more
flexible by parsing the TENDERMINT_BUILD_OPTIONS command
line variable (a-la Debian, inspired by dpkg-buildpackage's
DEB_BUILD_OPTIONS), e.g:
$ make install TENDERMINT_BUILD_OPTIONS='cleveldb'
replaces the old:
$ make install_c
Options can be mix&match'd, e.g.:
$ make install TENDERMINT_BUILD_OPTIONS='cleveldb race nostrip'
Three options are available:
- nostrip: don't strip debugging symbols nor DWARF tables.
- cleveldb: use cleveldb as db backend instead of goleveldb;
it switches on the CGO_ENABLED Go environment variale.
- race: pass -race to go build and enable data race detection.
This changeset is a port of gaia pull request: cosmos/gaia#363.
* Remove traces oaf `github.com/tendermint/abci`
- removed abci dockerfile as it was still referencing `github.com/tendermint/abci`
Signed-off-by: Marko Baricevic <marbar3778@yahoo.com>
* nor change to install of abci
* use abci-cli instead of tendermint node
* remove traces of Dockerfile.develop
also use latest Go in Dockerfile.testing
* update docker readme
* remove wrapping because it will look awful on docker hub
* Add cleveldb build for Amazon Linux
In attempting to build Tendermint binaries with cleveldb support that we
can use for load testing (see https://github.com/interchainio/got), it
became apparent that we need a bit of a simpler build process for this
kind of executable. Since we're basing our load testing infrastructure
on Amazon Linux, it makes sense to support such a build process for
Amazon Linux in a platform-independent way.
This PR allows one to simply build the Amazon Linux-compatible binary
using Docker on one's local machine. It first builds an Amazon
Linux-based build image with Go v1.12.9, and then it uses that image to
build the cleveldb version of Tendermint.
This should, in theory, be compatible with CentOS too, but that's yet to
be tested.
* Add comment describing the new Makefile target
* Add missing PHONY entry for new Makefile target
* Expand on Makefile comment
* Quick link fixes throughout docs and repo
- used markdown link tester to find broken links
Signed-off-by: Marko Baricevic <marbar3778@yahoo.com>
* minor change remove slash
* pr comments
* minor fix
* remove docker.develop
* remove master tag
* Update to using go mod from dep
* Remove references to make get_vendor_deps
* Specify go version
* Set GO111MODULE=on and add -mod=readonly
* Fix exported env
* switch to using go1.12 everywhere
* Fix test scripts
* Typo:
* Prepend GO111MODULE=on
* remove dep cache
* Revert "remove dep cache"
This reverts commit 45117bda
Signed-off-by: Ismail Khoffi <Ismail.Khoffi@gmail.com>
* bring back the dependency cache and change it to cache modules instead
of vendored deps; also:
- bump version for dependency cache
- bump version on pkg-cache (includes modules directory)
Signed-off-by: Ismail Khoffi <Ismail.Khoffi@gmail.com>
* remove some more traces of dep:
- remove Gopkg.(toml | lock)
- update contributing guidlines
- set global default in circleci (GO111MODULE=on)
Signed-off-by: Ismail Khoffi <Ismail.Khoffi@gmail.com>
* global var failed for `test_cover` with
`go: unknown environment setting GO111MODULE=true`
although the var was `GO111MODULE: on`
Signed-off-by: Ismail Khoffi <Ismail.Khoffi@gmail.com>
* Changelog pending entry
Signed-off-by: Ismail Khoffi <Ismail.Khoffi@gmail.com>
* Add bbolt dependency to go.mod
Signed-off-by: Ismail Khoffi <Ismail.Khoffi@gmail.com>
* move -mod=readonly to build flags
* fix build scripts
Search for the right variable when introspecting Go code. `Version` was
renamed to `TMCoreSemVer`.
This is regression introduced in
b95ac688af
* fix all `Version` introspections.
Use `TMCoreSemVer` instead of `Version`
* Switch ports 466xx to be 266xx
This is done so the default ports aren't in the linux kernel's default ephemeral port range.
* Update ABCI import
* Bump cache on circleci
* Get more verbose output for debugging
* Bump abci dependency
* Fix accidental change of a block header's hash
* pin abci release
- Updated Dockerfile and created build-docker target
- Changed localnode docker image to set permissions to more permissive (docker has different user than host system)
- Added sentry node terraform and ansible script
