The problem with the `TestStateFullRound1` is that the state that we are observeing, `cs`, can advance to the next height before we query its data. Specifically, on line `388`, when we called `validatePrevote`, the `cs` State had already advanced to height 2, so querying that State for the votes of height 1 either yielded nil or an erroneous value. This change adds a `ensurePrevoteMatch` function that checks that the prevote occurred and checks that it is for the expected block at the same time. If this change looks reasonable I can just apply the same fix to all of the places where we perform `ensurePrevote` followed by `validatePrevote` to use this function instead.
*light: rpc /status returns status of light client ; code refactoring
light: moved lightClientInfo into light.go, renamed String to ID
test/e2e: Return light client trusted height instead of SyncInfo trusted height
test/e2e/start.go: Not waiting for light client to catch up in tests. Removed querying of syncInfo in start if the node is a light node
* light: Removed call to primary /status. Added trustedPeriod to light info
* light/provider: added ID function to return IP of primary and witnesses
* light/provider/http/http_test: renamed String() to ID()
This change has two main effects:
1. Remove most of the Async methods from the abci.Client interface.
Remaining are FlushAsync, CommitTxAsync, and DeliverTxAsync.
2. Rename the synchronous methods to remove the "Sync" suffix.
The rest of the change is updating the implementations, subsets, and mocks of
the interface, along with the call sites that point to them.
* Fix stringly-typed mock stubs.
* Rename helper method.
The test filter was looking for "TestGoFiles", which does not include tests in
a separate package (e.g., "package foo_test" for "package foo").
This caused several packages not to be tested in CI, including:
github.com/tendermint/tendermint/abci/client
github.com/tendermint/tendermint/crypto
github.com/tendermint/tendermint/crypto/tmhash
github.com/tendermint/tendermint/internal/eventbus
github.com/tendermint/tendermint/internal/evidence
github.com/tendermint/tendermint/internal/inspect
github.com/tendermint/tendermint/internal/jsontypes
github.com/tendermint/tendermint/internal/libs/protoio
github.com/tendermint/tendermint/internal/libs/sync
github.com/tendermint/tendermint/internal/p2p/pex
github.com/tendermint/tendermint/internal/pubsub
github.com/tendermint/tendermint/internal/pubsub/query
github.com/tendermint/tendermint/internal/pubsub/query/syntax
github.com/tendermint/tendermint/internal/state/indexer
github.com/tendermint/tendermint/internal/state/indexer/block/kv
github.com/tendermint/tendermint/libs/json
github.com/tendermint/tendermint/libs/log
github.com/tendermint/tendermint/libs/os
github.com/tendermint/tendermint/light
github.com/tendermint/tendermint/light/provider/http
github.com/tendermint/tendermint/privval/grpc
github.com/tendermint/tendermint/proto/tendermint/blocksync
github.com/tendermint/tendermint/proto/tendermint/consensus
github.com/tendermint/tendermint/proto/tendermint/statesync
github.com/tendermint/tendermint/rpc/client
github.com/tendermint/tendermint/rpc/client/mock
github.com/tendermint/tendermint/test/e2e/tests
github.com/tendermint/tendermint/test/fuzz/mempool
github.com/tendermint/tendermint/test/fuzz/p2p/secretconnection
github.com/tendermint/tendermint/test/fuzz/rpc/jsonrpc/server
Updates #7626 and #7634.
During file rotation and WAL shutdown, there was a race condition between users
of an autofile and its termination. To fix this, ensure operations on an
autofile are properly synchronized, and report errors when attempting to use an
autofile after it was closed.
Notably:
- Simplify the cancellation protocol between signal and Close.
- Exclude writers to an autofile during rotation.
- Add documentation about what is going on.
There is a lot more that could be improved here, but this addresses the more
obvious races that have been panicking unit tests.
## What does this pull request do?
This pull requests adds two metrics intended for use in calculating an experimental value for `MessageDelay`.
The metrics are as follows:
```
# HELP tendermint_consensus_complete_prevote_message_delay Difference in seconds between the proposal timestamp and the timestamp of the prevote that achieved 100% of the voting power in the prevote step.
# TYPE tendermint_consensus_complete_prevote_message_delay gauge
tendermint_consensus_complete_prevote_message_delay{chain_id="test-chain-aZbwF1"} 0.013025505
# HELP tendermint_consensus_quorum_prevote_message_delay Difference in seconds between the proposal timestamp and the timestamp of the prevote that achieved a quorum in the prevote step.
# TYPE tendermint_consensus_quorum_prevote_message_delay gauge
tendermint_consensus_quorum_prevote_message_delay{chain_id="test-chain-aZbwF1"} 0.013025505
```
## Why this change?
For more information on what these metrics are calculating, see #7202. The aim is to merge to backport these metrics to v0.34 and run nodes on a few popular chains with these metrics to determine the experimental values for `MessageDelay` on these popular chains and use these to select our default `SynchronyParams.MessageDelay` value.
## Why Gauges for the metrics?
Gauges allow us to overwrite the metric on each successive observation. We can then capture these metrics over time to track the highest and lowest observed value.
This commit changes the behaviour of the /unconfirmed_txs endpoint by replacing limit with a page and perPage parameter for pagination.
The test case for unconfirmed_txs have been accommodated to properly test this change and the documentation for the API as well.
The custom error types in the provider package did not propagate their wrapped
underlying reasons, making it difficult for the test to check that the correct
error was observed.
- Fix the custom errors to have a true underlying error (not just a string).
- Add Unwrap methods to support inspection by errors.Is.
- Update usage in a few places.
- Fix the test to check for acceptable variation.
Fixes#7609.
After writing and then reading a bunch of random messages, the test was
checking that it did not read the same number of messages that it wrote.
The sense of this check was inverted; they should match.
Introduced by accident in #7522. I'm not sure why this did not show up in CI.
Edit: I now know why it didn't show up in ci: #7608.
Add package jsontypes that implements a subset of the custom libs/json
package. Specifically it handles encoding and decoding of interface types
wrapped in "tagged" JSON objects. It omits the deep reflection on arbitrary
types, preserving only the handling of type tags wrapper encoding.
- Register interface types (Evidence, PubKey, PrivKey) for tagged encoding.
- Update the existing implementations to satisfy the type.
- Register those types with the jsontypes registry.
- Add string tags to 64-bit integer fields where needed.
- Add marshalers to structs that export interface-typed fields.
* Prevote nil if not timely
* William's suggestion to get the proposal from the proposer instead of
generating it.
* Don't check rhs for genesis block
* Update IsTimely to match the specification
* Fix proposal tests
* Add more timely tests and check votes
* Mark proposal invalid in SetProposal, fix in the future test
* save proposal time on roundstate
* received -> receive
* always reset proposal time
* Add IsTimely test for genesis proposal
* Check timely before ValidateBlock
* Review comments from Daniel
Co-authored-by: William Banfield <wbanfield@gmail.com>
* Allow nil block ID check in ensureProposalWithTimout
* William's suggestion to get the proposal from the proposer instead of
generating it.
* Remove error check on service stop
This change updates the proposal logic to use the block's timestamp in the proposal message. It adds an additional piece of validation logic to the prevote step to check that the block's timestamp matches the proposal message's timestamp.
This change introduces the logic to have the proposer wait until the previous block time has passed before attempting to propose the next block.
The change achieves this by by adding a new clause into the enterPropose state machine method. The method now checks if the validator is the proposer and if the validator's clock is behind the previous block's time. If the validator's clock is behind the previous block time, it schedules a timeout to re-enter the enter propose method after enough time has passed.
This change adds the new TimingParams proto messages. These new messages were build using the wb/proposer-based-timestamps branch on the spec repo.
This change also adds validation that these values are positive when parsed and adds the new parameters into the existing tests.
* internal/consensus: refactor the common_test functions to use a single timeout function
* remove ensurePrecommit
* Update internal/consensus/common_test.go
Co-authored-by: M. J. Fromberger <fromberger@interchain.io>
* join lines for fatal messages
Co-authored-by: M. J. Fromberger <fromberger@interchain.io>
Co-authored-by: M. J. Fromberger <fromberger@interchain.io>
