This continues the push of plumbing contexts through tendermint. I
attempted to find all goroutines in the production code (non-test) and
made sure that these threads would exit when their contexts were
canceled, and I believe this PR does that.
This is a very small change, but removes a method from the
`service.Service` interface (a win!) and forces callers to explicitly
pass loggers in to objects during construction rather than (later)
injecting them. There's not a real need for this kind of lazy
construction of loggers, and I think a decent potential for confusion
for mutable loggers.
The main concern I have is that this changes the constructor API for
ABCI clients. I think this is fine, and I suspect that as we plumb
contexts through, and make changes to the RPC services there'll be a
number of similar sorts of changes to various (quasi) public
interfaces, which I think we should welcome.
This follows the same model as we did in the p2p package.
Rework the indexer service constructor to take a struct of arguments,
that makes it easier to construct the optional settings.
Deprecate but do not remove the existing constructor.
Clean up node initialization a little bit.
This is part of the work described by #7156.
Remove "unbuffered subscriptions" from the pubsub service.
Replace them with a dedicated blocking "observer" mechanism.
Use the observer mechanism for indexing.
Add a SubscribeWithArgs method and deprecate the old Subscribe
method. Remove SubscribeUnbuffered entirely (breaking).
Rework the Subscription interface to eliminate exposed channels.
Subscriptions now use a context to manage lifecycle notifications.
Internalize the eventbus package.
The main (and minor) win of this PR is that the transport is fully the
responsibility of the router and the node doesn't need to be responsible for its lifecylce.
This is, perhaps, the trival final piece of #7075 that I've been
working on.
There's more work to be done:
- push more of the setup into the pacakges themselves
- move channel-based sending/filtering out of the
- simplify the buffering throuhgout the p2p stack.
This PR adds an initial set of metrics for use ABCI. The initial metrics enable the calculation of timing histograms and call counts for each of the ABCI methods. The metrics are also labeled as either 'sync' or 'async' to determine if the method call was performed using ABCI's `*Async` methods.
An example of these metrics is included here for reference:
```
tendermint_abci_connection_method_timing_bucket{chain_id="ci",method="commit",type="sync",le="0.0001"} 0
tendermint_abci_connection_method_timing_bucket{chain_id="ci",method="commit",type="sync",le="0.0004"} 5
tendermint_abci_connection_method_timing_bucket{chain_id="ci",method="commit",type="sync",le="0.002"} 12
tendermint_abci_connection_method_timing_bucket{chain_id="ci",method="commit",type="sync",le="0.009"} 13
tendermint_abci_connection_method_timing_bucket{chain_id="ci",method="commit",type="sync",le="0.02"} 13
tendermint_abci_connection_method_timing_bucket{chain_id="ci",method="commit",type="sync",le="0.1"} 13
tendermint_abci_connection_method_timing_bucket{chain_id="ci",method="commit",type="sync",le="0.65"} 13
tendermint_abci_connection_method_timing_bucket{chain_id="ci",method="commit",type="sync",le="2"} 13
tendermint_abci_connection_method_timing_bucket{chain_id="ci",method="commit",type="sync",le="6"} 13
tendermint_abci_connection_method_timing_bucket{chain_id="ci",method="commit",type="sync",le="25"} 13
tendermint_abci_connection_method_timing_bucket{chain_id="ci",method="commit",type="sync",le="+Inf"} 13
tendermint_abci_connection_method_timing_sum{chain_id="ci",method="commit",type="sync"} 0.007802058000000001
tendermint_abci_connection_method_timing_count{chain_id="ci",method="commit",type="sync"} 13
```
These metrics can easily be graphed using prometheus's `histogram_quantile(...)` method to pick out a particular quantile to graph or examine. I chose buckets that were somewhat of an estimate of expected range of times for ABCI operations. They start at .0001 seconds and range to 25 seconds. The hope is that this range captures enough possible times to be useful for us and operators.
A few notes:
- this is not all the deletion that we can do, but this is the most
"simple" case: it leaves in shims, and there's some trivial
additional cleanup to the transport that can happen but that
requires writing more code, and I wanted this to be easy to review
above all else.
- This should land *after* we cut the branch for 0.35, but I'm
anticipating that to happen soon, and I wanted to run this through
CI.
This commit should be one of the first to land as part of the v0.36
cycle *after* cutting the 0.35 branch.
The blocksync/v2 reactor was originally implemented as an experiement
to produce an implementation of the blockstack protocol that would be
easier to test and validate, but it was never appropriately
operationalized and this implementation was never fully debugged. When
the p2p layer was refactored as part of the 0.35 cycle, the v2
implementation was not refactored and it was left in the codebase but
not removed. This commit just removes all references to it.
The code in the Tendermint repository makes heavy use of import aliasing.
This is made necessary by our extensive reuse of common base package names, and
by repetition of similar names across different subdirectories.
Unfortunately we have not been very consistent about which packages we alias in
various circumstances, and the aliases we use vary. In the spirit of the advice
in the style guide and https://github.com/golang/go/wiki/CodeReviewComments#imports,
his change makes an effort to clean up and normalize import aliasing.
This change makes no API or behavioral changes. It is a pure cleanup intended
o help make the code more readable to developers (including myself) trying to
understand what is being imported where.
Only unexported names have been modified, and the changes were generated and
applied mechanically with gofmt -r and comby, respecting the lexical and
syntactic rules of Go. Even so, I did not fix every inconsistency. Where the
changes would be too disruptive, I left it alone.
The principles I followed in this cleanup are:
- Remove aliases that restate the package name.
- Remove aliases where the base package name is unambiguous.
- Move overly-terse abbreviations from the import to the usage site.
- Fix lexical issues (remove underscores, remove capitalization).
- Fix import groupings to more closely match the style guide.
- Group blank (side-effecting) imports and ensure they are commented.
- Add aliases to multiple imports with the same base package name.
This is just a configuration change to default to using the new stack
unless explicitly disabled (e.g. `UseLegacy`) this renames the
configuration value and makes the configuration logic more clear.
The legacy option is good to retain as a fallback if the new stack has
issues operationally, but we should make sure that most of the time
we're using the new stack.
EDIT: Updated, see [comment below]( https://github.com/tendermint/tendermint/pull/6785#issuecomment-897793175)
This change adds a sketch of the `Debug` mode.
This change adds a `Debug` struct to the node package. This `Debug` struct is intended to be created and started by a command in the `cmd` directory. The `Debug` struct runs the RPC server on the data directories: both the state store and the block store.
This change required a good deal of refactoring. Namely, a new `rpc.go` file was added to the `node` package. This file encapsulates functions for starting RPC servers used by nodes. A potential additional change is to further factor this code into shared code _in_ the `rpc` package.
Minor API tweaks were also made that seemed appropriate such as the mechanism for fetching routes from the `rpc/core` package.
Additional work is required to register the `Debug` service as a command in the `cmd` directory but I am looking for feedback on if this direction seems appropriate before diving much further.
closes: #5908
## Description
Expose p2p functions for use in the sdk.
These functions could also be copied over to the sdk. I dont have a preference of which is better.
## Description
Add version back to versions, but allow it to be overridden via a ldflag.
Reason:
Many users are not setting the ldflag causing issues with tooling that relies on it (cosmjs)
closes#6488
cc @webmaster128
