Closes#8069
* Type `ABCIResponses` was just wrapping type `ResponseFinalizeBlock`. This patch removes the former.
* Did some renaming to avoid confusion on the data structure we are working with.
* We also remove any stale ABCIResponses we may have in the state store at the time of pruning
**IMPORTANT**: There is an undesirable side-effect of the unwrapping. An empty `ResponseFinalizeBlock` yields a 0-length proto-buf serialized buffer. This was not the case with `ABCIResponses`. I have added an interim solution, but open for suggestions on more elegant ones.
This PR makes vote extensions optional within Tendermint. A new ConsensusParams field, called ABCIParams.VoteExtensionsEnableHeight, has been added to toggle whether or not extensions should be enabled or disabled depending on the current height of the consensus engine. Related to: #8453
Closes: #8575
This PR aims to fix the `LastCommitRound can only be negative for initial height 0` issue we see in the e2e tests by initializing the `state` object before starting the receive routines in the consensus reactor. This is somewhat inelegant, but it should fix the issue.
## What does this change do?
This pull request completes the change to the `metricsgen` metrics. It adds `go generate` directives to all of the files containing the `Metrics` structs.
Using the outputs of `metricsdiff` between these generated metrics and `master`, we can see that there is not a diff between the two sets of metrics when run locally.
```
[william@sidewinder] tendermint[wb/metrics-gen-transition]:. ◆ ./scripts/metricsgen/metricsdiff/metricsdiff metrics_master metrics_generated
[william@sidewinder] tendermint[wb/metrics-gen-transition]:. ◆
```
This change also adds parsing for a `metrics:` key in a field comment. If a comment line begins with `//metrics:` the rest of the line is interpreted to be the metric help text. Additionally, a bug where lists of labels were not properly quoted in the `metricsgen` rendered output was fixed.
This pull request adds an additional set of metrics targeted at providing more visibility into `abci++`.
The following set of metrics are added and exposed through the `metrics` endpoint:
```
tendermint_consensus_proposal_receive_count{chain_id="test-chain-IrF74Y",status="accepted"} 34
tendermint_consensus_proposal_create_count{chain_id="test-chain-IrF74Y"} 34
tendermint_consensus_vote_extension_receive_count{chain_id="test-chain-IrF74Y",status="accepted"} 34
tendermint_consensus_round_voting_power_percent{chain_id="test-chain-IrF74Y",vote_type="precommit"} 1
tendermint_consensus_round_voting_power_percent{chain_id="test-chain-IrF74Y",vote_type="prevote"} 1
tendermint_state_consensus_param_updates{chain_id="test-chain-IrF74Y"} 0
tendermint_state_validator_set_updates{chain_id="test-chain-IrF74Y"} 0
tendermint_consensus_late_votes{chain_id="test-chain-IrF74Y",vote_type="precommit"} 16
```
This pull request also updates the `metrics.md` file to include some metrics that were previously missed. My hope is to generate the `metrics.md` file with a future version of the tool being architected in #8479
* Split vote verification/validation based on vote extensions
Some parts of the code need vote extensions to be verified and
validated (mostly in consensus), and other parts of the code don't
because its possible that, in some cases (as per RFC 017), we won't have
vote extensions.
This explicitly facilitates that split.
Signed-off-by: Thane Thomson <connect@thanethomson.com>
* Only sign extensions in precommits, not prevotes
Signed-off-by: Thane Thomson <connect@thanethomson.com>
* Update privval/file.go
Co-authored-by: M. J. Fromberger <fromberger@interchain.io>
* Apply suggestions from code review
Co-authored-by: M. J. Fromberger <fromberger@interchain.io>
* Temporarily disable extension requirement again for E2E testing
Signed-off-by: Thane Thomson <connect@thanethomson.com>
* Reorganize comment for clarity
Signed-off-by: Thane Thomson <connect@thanethomson.com>
* Leave vote validation and pre-call nil check up to caller of VoteToProto
Signed-off-by: Thane Thomson <connect@thanethomson.com>
* Split complex vote validation test into multiple tests
Signed-off-by: Thane Thomson <connect@thanethomson.com>
* Universally enforce no vote extensions on any vote type but precommits
Signed-off-by: Thane Thomson <connect@thanethomson.com>
* Make error messages more generic
Signed-off-by: Thane Thomson <connect@thanethomson.com>
* Verify with vote extensions when constructing a VoteSet
Signed-off-by: Thane Thomson <connect@thanethomson.com>
* Expand comment for clarity
Signed-off-by: Thane Thomson <connect@thanethomson.com>
* Add extension check for prevotes prior to signing votes
Signed-off-by: Thane Thomson <connect@thanethomson.com>
* Fix supporting test code to only inject extensions into precommits
Signed-off-by: Thane Thomson <connect@thanethomson.com>
* Separate vote malleation from signing in vote tests for clarity
Signed-off-by: Thane Thomson <connect@thanethomson.com>
* Add extension signature length check and corresponding test
Signed-off-by: Thane Thomson <connect@thanethomson.com>
* Perform basic vote validation in CommitToVoteSet
Signed-off-by: Thane Thomson <connect@thanethomson.com>
Co-authored-by: M. J. Fromberger <fromberger@interchain.io>
* Refactor so building and linting works
This is the first step towards implementing vote extensions: generating
the relevant proto stubs and getting the build and linter to pass.
Signed-off-by: Thane Thomson <connect@thanethomson.com>
* Fix typo
Signed-off-by: Thane Thomson <connect@thanethomson.com>
* Better describe method given vote extensions
Signed-off-by: Thane Thomson <connect@thanethomson.com>
* Fix types tests
Signed-off-by: Thane Thomson <connect@thanethomson.com>
* Move CanonicalVoteExtension to canonical types proto defs
Signed-off-by: Thane Thomson <connect@thanethomson.com>
* Regenerate protos including latest PBTS synchrony params update
Signed-off-by: Thane Thomson <connect@thanethomson.com>
* Inject vote extensions into proposal
Signed-off-by: Thane Thomson <connect@thanethomson.com>
* Thread vote extensions through code and fix tests
Signed-off-by: Thane Thomson <connect@thanethomson.com>
* Remove extraneous empty value initialization
Signed-off-by: Thane Thomson <connect@thanethomson.com>
* Fix lint
Signed-off-by: Thane Thomson <connect@thanethomson.com>
* Fix missing VerifyVoteExtension request data
Signed-off-by: Thane Thomson <connect@thanethomson.com>
* Explicitly ensure length > 0 to sign vote extension
Signed-off-by: Thane Thomson <connect@thanethomson.com>
* Explicitly ensure length > 0 to sign vote extension
Signed-off-by: Thane Thomson <connect@thanethomson.com>
* Remove extraneous comment
Signed-off-by: Thane Thomson <connect@thanethomson.com>
* Update privval/file.go
Co-authored-by: M. J. Fromberger <fromberger@interchain.io>
* Update types/vote_test.go
Co-authored-by: M. J. Fromberger <fromberger@interchain.io>
* Format
Signed-off-by: Thane Thomson <connect@thanethomson.com>
* Fix ABCI proto generation scripts for Linux
Signed-off-by: Thane Thomson <connect@thanethomson.com>
* Sync intermediate and goal protos
Signed-off-by: Thane Thomson <connect@thanethomson.com>
* Update internal/consensus/common_test.go
Co-authored-by: Sergio Mena <sergio@informal.systems>
* Use dummy value with clearer meaning
Signed-off-by: Thane Thomson <connect@thanethomson.com>
* Rewrite loop for clarity
Signed-off-by: Thane Thomson <connect@thanethomson.com>
* Panic on ABCI++ method call failure
Signed-off-by: Thane Thomson <connect@thanethomson.com>
* Add strong correctness guarantees when constructing extended commit info for ABCI++
Signed-off-by: Thane Thomson <connect@thanethomson.com>
* Add strong guarantee in extendedCommitInfo that the number of votes corresponds
Signed-off-by: Thane Thomson <connect@thanethomson.com>
* Make extendedCommitInfo function more robust
At first extendedCommitInfo expected votes to be in the same order as
their corresponding validators in the supplied CommitInfo struct, but
this proved to be rather difficult since when a validator set's loaded
from state it's first sorted by voting power and then by address.
Instead of sorting the votes in the same way, this approach simply maps
votes to their corresponding validator's address prior to constructing
the extended commit info. This way it's easy to look up the
corresponding vote and we don't need to care about vote order.
Signed-off-by: Thane Thomson <connect@thanethomson.com>
* Remove extraneous validator address assignment
Signed-off-by: Thane Thomson <connect@thanethomson.com>
* Sign over canonical vote extension
Signed-off-by: Thane Thomson <connect@thanethomson.com>
* Validate vote extension signature against canonical vote extension
Signed-off-by: Thane Thomson <connect@thanethomson.com>
* Update privval tests for more meaningful dummy value
Signed-off-by: Thane Thomson <connect@thanethomson.com>
* Add vote extension capability to E2E test app
Signed-off-by: Thane Thomson <connect@thanethomson.com>
* Disable lint for weak RNG usage for test app
Signed-off-by: Thane Thomson <connect@thanethomson.com>
* Use parseVoteExtension instead of custom parsing in PrepareProposal
Signed-off-by: Thane Thomson <connect@thanethomson.com>
* Only include extension if we have received txs
It's unclear at this point why this is necessary to ensure that the
application's local app_hash matches that committed in the previous
block.
Signed-off-by: Thane Thomson <connect@thanethomson.com>
* Require app_hash from app to match that from last block
Signed-off-by: Thane Thomson <connect@thanethomson.com>
* Add contrived (possibly flaky) test to check that vote extensions code works
Signed-off-by: Thane Thomson <connect@thanethomson.com>
* Remove workaround for problem now solved by #8229
Signed-off-by: Thane Thomson <connect@thanethomson.com>
* add tests for vote extension cases
* Fix spelling mistake to appease linter
Signed-off-by: Thane Thomson <connect@thanethomson.com>
* Collapse redundant if statement
Signed-off-by: Thane Thomson <connect@thanethomson.com>
* Formatting
Signed-off-by: Thane Thomson <connect@thanethomson.com>
* Always expect an extension signature, regardless of whether an extension is present
Signed-off-by: Thane Thomson <connect@thanethomson.com>
* Votes constructed from commits cannot include extensions or signatures
Signed-off-by: Thane Thomson <connect@thanethomson.com>
* Pass through vote extension in test helpers
Signed-off-by: Thane Thomson <connect@thanethomson.com>
* Temporarily disable vote extension signature requirement
Signed-off-by: Thane Thomson <connect@thanethomson.com>
* Expand on vote equality test errors for clarity
Signed-off-by: Thane Thomson <connect@thanethomson.com>
* Expand on vote matching error messages in testing
Signed-off-by: Thane Thomson <connect@thanethomson.com>
* Allow for selective subscription by vote type
This is an attempt to fix the intermittently failing
`TestPrepareProposalReceivesVoteExtensions` test in the internal
consensus package.
Occasionally we get prevote messages via the subscription channel, and
we're not interested in those. This change allows us to specify what
types of votes we're interested in (i.e. precommits) and discard the
rest.
Signed-off-by: Thane Thomson <connect@thanethomson.com>
* Read lock consensus state mutex in test helper to avoid data race
Signed-off-by: Thane Thomson <connect@thanethomson.com>
* Revert BlockIDFlag parameter in node test
Signed-off-by: Thane Thomson <connect@thanethomson.com>
* Perform additional check in ProcessProposal for special txs generated by vote extensions
Signed-off-by: Thane Thomson <connect@thanethomson.com>
* e2e: check that our added tx does not cause all txs to exceed req.MaxTxBytes
Signed-off-by: Thane Thomson <connect@thanethomson.com>
* Only set vote extension signatures when signing is successful
Signed-off-by: Thane Thomson <connect@thanethomson.com>
* Remove channel capacity constraint in test helper to avoid missing messages
Signed-off-by: Thane Thomson <connect@thanethomson.com>
* Add TODO to always require extension signatures in vote validation
Signed-off-by: Thane Thomson <connect@thanethomson.com>
* e2e: reject vote extensions if the request height does not match what we expect
Signed-off-by: Thane Thomson <connect@thanethomson.com>
* types: remove extraneous call to voteWithoutExtension in test
Signed-off-by: Thane Thomson <connect@thanethomson.com>
* Remove unnecessary address parameter from CanonicalVoteExtension
Signed-off-by: Thane Thomson <connect@thanethomson.com>
* privval: change test vote type to precommit since we use an extension
Signed-off-by: Thane Thomson <connect@thanethomson.com>
* privval: update signing logic to cater for vote extensions
Signed-off-by: Thane Thomson <connect@thanethomson.com>
* proto: update field descriptions for vote message
Signed-off-by: Thane Thomson <connect@thanethomson.com>
* proto: update field description for vote extension sig in vote message
Signed-off-by: Thane Thomson <connect@thanethomson.com>
* proto/types: use fixed-length 64-bit integers for rounds in CanonicalVoteExtension
Signed-off-by: Thane Thomson <connect@thanethomson.com>
* consensus: fix flaky TestPrepareProposalReceivesVoteExtensions
Signed-off-by: Thane Thomson <connect@thanethomson.com>
* consensus: remove previously added test helper functionality
Signed-off-by: Thane Thomson <connect@thanethomson.com>
* e2e: add error logs when we get an unexpected height in ExtendVote or VerifyVoteExtension requests
Signed-off-by: Thane Thomson <connect@thanethomson.com>
* node_test: get validator addresses from privvals
Signed-off-by: Thane Thomson <connect@thanethomson.com>
* privval/file_test: optimize filepv creation in tests
Signed-off-by: Thane Thomson <connect@thanethomson.com>
* privval: add test to check that vote extensions are always signed
Signed-off-by: Thane Thomson <connect@thanethomson.com>
* Add a script to check documentation for ToC entries. (#8356)
This script verifies that each document in the docs and architecture directory
has a corresponding table-of-contents entry in its README file. It can be run
manually from the command line.
- Hook up this script to run in CI (optional workflow).
- Update ADR ToC to include missing entries this script found.
* build(deps): Bump async from 2.6.3 to 2.6.4 in /docs (#8357)
Bumps [async](https://github.com/caolan/async) from 2.6.3 to 2.6.4.
- [Release notes](https://github.com/caolan/async/releases)
- [Changelog](https://github.com/caolan/async/blob/v2.6.4/CHANGELOG.md)
- [Commits](https://github.com/caolan/async/compare/v2.6.3...v2.6.4)
---
updated-dependencies:
- dependency-name: async
dependency-type: indirect
...
Signed-off-by: dependabot[bot] <support@github.com>
Co-authored-by: dependabot[bot] <49699333+dependabot[bot]@users.noreply.github.com>
* privval/file_test: reset vote ext sig before signing
Signed-off-by: Thane Thomson <connect@thanethomson.com>
Co-authored-by: M. J. Fromberger <fromberger@interchain.io>
Co-authored-by: Sergio Mena <sergio@informal.systems>
Co-authored-by: William Banfield <wbanfield@gmail.com>
Co-authored-by: dependabot[bot] <49699333+dependabot[bot]@users.noreply.github.com>
There's no case where we recieve an error during handshake and don't
just return/continue, and it's at a point during startup where not
much is going on in the process, so having some classes of errors
return errors and some return panics is confusing and doesn't protect
anything.
Bumps [github.com/vektra/mockery/v2](https://github.com/vektra/mockery) from 2.10.2 to 2.10.4.
<details>
<summary>Release notes</summary>
<p><em>Sourced from <a href="https://github.com/vektra/mockery/releases">github.com/vektra/mockery/v2's releases</a>.</em></p>
<blockquote>
<h2>v2.10.4</h2>
<h2>Changelog</h2>
<ul>
<li>c943e69 Merge pull request <a href="https://github-redirect.dependabot.com/vektra/mockery/issues/441">#441</a> from cfstras/fix/support-more-env-keys</li>
<li>ed87cf6 fix: allow configuring flags with "-" as Env var</li>
<li>17abd96 fix: unused config field <code>Tags</code></li>
<li>53114cf test: add test for env var configurations</li>
</ul>
<h2>v2.10.3</h2>
<h2>Changelog</h2>
<ul>
<li>ee25bcf Add/update mocks</li>
<li>4703d1a Merge pull request <a href="https://github-redirect.dependabot.com/vektra/mockery/issues/444">#444</a> from vektra/remove_need_deps</li>
<li>ba1f213 Remove packages.NeedDeps</li>
<li>ed38b20 Update go.sum</li>
</ul>
</blockquote>
</details>
<details>
<summary>Commits</summary>
<ul>
<li><a href="c943e696a0"><code>c943e69</code></a> Merge pull request <a href="https://github-redirect.dependabot.com/vektra/mockery/issues/441">#441</a> from cfstras/fix/support-more-env-keys</li>
<li><a href="4703d1a42f"><code>4703d1a</code></a> Merge pull request <a href="https://github-redirect.dependabot.com/vektra/mockery/issues/444">#444</a> from vektra/remove_need_deps</li>
<li><a href="ed38b20a49"><code>ed38b20</code></a> Update go.sum</li>
<li><a href="ee25bcfcb5"><code>ee25bcf</code></a> Add/update mocks</li>
<li><a href="ba1f213e17"><code>ba1f213</code></a> Remove packages.NeedDeps</li>
<li><a href="17abd96c57"><code>17abd96</code></a> fix: unused config field <code>Tags</code></li>
<li><a href="53114cfce4"><code>53114cf</code></a> test: add test for env var configurations</li>
<li><a href="ed87cf671a"><code>ed87cf6</code></a> fix: allow configuring flags with "-" as Env var</li>
<li>See full diff in <a href="https://github.com/vektra/mockery/compare/v2.10.2...v2.10.4">compare view</a></li>
</ul>
</details>
<br />
[](https://docs.github.com/en/github/managing-security-vulnerabilities/about-dependabot-security-updates#about-compatibility-scores)
Dependabot will resolve any conflicts with this PR as long as you don't alter it yourself. You can also trigger a rebase manually by commenting `@dependabot rebase`.
[//]: # (dependabot-automerge-start)
[//]: # (dependabot-automerge-end)
---
<details>
<summary>Dependabot commands and options</summary>
<br />
You can trigger Dependabot actions by commenting on this PR:
- `@dependabot rebase` will rebase this PR
- `@dependabot recreate` will recreate this PR, overwriting any edits that have been made to it
- `@dependabot merge` will merge this PR after your CI passes on it
- `@dependabot squash and merge` will squash and merge this PR after your CI passes on it
- `@dependabot cancel merge` will cancel a previously requested merge and block automerging
- `@dependabot reopen` will reopen this PR if it is closed
- `@dependabot close` will close this PR and stop Dependabot recreating it. You can achieve the same result by closing it manually
- `@dependabot ignore this major version` will close this PR and stop Dependabot creating any more for this major version (unless you reopen the PR or upgrade to it yourself)
- `@dependabot ignore this minor version` will close this PR and stop Dependabot creating any more for this minor version (unless you reopen the PR or upgrade to it yourself)
- `@dependabot ignore this dependency` will close this PR and stop Dependabot creating any more for this dependency (unless you reopen the PR or upgrade to it yourself)
</details>
* Outstanding abci-gen changes to 'pb.go' files
* Removed modified_tx_status from spec and protobufs
* Fix sed for OSX
* Regenerated abci protobufs with 'abci-proto-gen'
* Code changes. UTs e2e tests passing
* Recovered UT: TestPrepareProposalModifiedTxStatusFalse
* Adapted UT
* Fixed UT
* Revert "Fix sed for OSX"
This reverts commit e576708c61.
* Update internal/state/execution_test.go
Co-authored-by: William Banfield <4561443+williambanfield@users.noreply.github.com>
* Update abci/example/kvstore/kvstore.go
Co-authored-by: M. J. Fromberger <fromberger@interchain.io>
* Update internal/state/execution_test.go
Co-authored-by: William Banfield <4561443+williambanfield@users.noreply.github.com>
* Update spec/abci++/abci++_tmint_expected_behavior_002_draft.md
Co-authored-by: William Banfield <4561443+williambanfield@users.noreply.github.com>
* Addressed some comments
* Added one test that tests error at the ABCI client + Fixed some mock calls
* Addressed remaining comments
* Update abci/example/kvstore/kvstore.go
Co-authored-by: William Banfield <4561443+williambanfield@users.noreply.github.com>
* Update abci/example/kvstore/kvstore.go
Co-authored-by: William Banfield <4561443+williambanfield@users.noreply.github.com>
* Update abci/example/kvstore/kvstore.go
Co-authored-by: William Banfield <4561443+williambanfield@users.noreply.github.com>
* Update spec/abci++/abci++_tmint_expected_behavior_002_draft.md
Co-authored-by: William Banfield <4561443+williambanfield@users.noreply.github.com>
* Addressed William's latest comments
* Adressed Michael's comment
* Fixed UT
* Some md fixes
* More md fixes
* gofmt
Co-authored-by: William Banfield <4561443+williambanfield@users.noreply.github.com>
Co-authored-by: M. J. Fromberger <fromberger@interchain.io>
Replaces the set of timeout parameters in the config.toml file with unsafe-*override versions of the corresponding ConsensusParams.Timeout field. These fields can be used for the duration of v0.36 to override the consensus param in case of emergency.
Adds a set to the ./internal/consensus/State type for correctly calculating the value of each timeout based on the set of overrides specified.
closes: #8039
This pull request updates the new ABCI++ protos to use `enum`s in place of `bool`s. `enums` may be preferred over `bool` because an `enum` can be udpated to include new statuses in the future, whereas a `bool` cannot and is fixed as just `true` or `false` over the whole lifecycle of the API.
We can reduce the size of test fixtures (which will improve test
reliability) without impacting these tests' primary role (which is
correctness.)
Also reducing these test logging will make the tests easier to read,
which whill be a good quality of life improvement for devs.
I see this panic in tests occasionally, and I don't think there's any
need to close this channel:
- it's only sent to in one place which has a select case with a
default clause, so there's no chance of deadlocks.
- the only place we recieve from it thas a timeout.
This contains two major changes:
- Remove the legacy test logging method, and just explicitly call the
noop logger. This is just to make the test logging behavior more
coherent and clear.
- Move the logging in the light package from the testing.T logger to
the noop logger. It's really the case that we very rarely need/want
to consider test logs unless we're doing reproductions and running a
narrow set of tests.
In most cases, I (for one) prefer to run in verbose mode so I can
watch progress of tests, but I basically never need to consider
logs. If I do want to see logs, then I can edit in the testing.T
logger locally (which is what you have to do today, anyway.)
