* Load credentials and pass to ObjectStorage plugins
Update NewObjectBackupStore to take a CredentialsGetter which can be
used to get the credentials for a BackupStorageLocation if it has been
configured with a Credential. If the BSL has a credential, use that
SecretKeySelector to fetch the secret, write the contents to a temp file
and then pass that file through to the plugin via the config map using
the key `credentialsFile`. This relies on the plugin being able to use
this new config field.
This does not yet handle VolumeSnapshotLocations or ResticRepositories.
Signed-off-by: Bridget McErlean <bmcerlean@vmware.com>
* Address code reviews
Add godocs and comments.
Improve formatting and test names.
Signed-off-by: Bridget McErlean <bmcerlean@vmware.com>
* Address code reviews
Signed-off-by: Bridget McErlean <bmcerlean@vmware.com>
* Add uninstall cmd
- init fn to uninstall velero
- abstract dynamic client creation to a separate fn
- creates a separate client per unstructured resource
- add delete client for CRDs
- export appendUnstructured
- add uninstall command to main cmd
- export `podTemplateOption`
- uninstall resources in the reverse order of installation
- fallback to `velero` if no ns is provided during uninstall
- skip deletion if the resource doesn't exist
- handle resource not found error
- match log formatting with cli install logs
- add Delete fn to fake client
- fix import order
- add changelog
- add comment doc for CreateClient fn
Signed-off-by: Suraj Banakar <suraj@infracloud.io>
* Re-use uninstall code from test suite
- move helper functions out of test suite
- this is to prevent cyclic imports
- move uninstall helpers to uninstall cmd
- call them from test suite
- revert export of variables/fns from install code
- because not required anymore
Signed-off-by: Suraj Banakar <suraj@infracloud.io>
* Revert `PodTemplateOption` -> `podTemplateOption`
Signed-off-by: Suraj Banakar <suraj@infracloud.io>
* Use uninstall helper under VeleroUninstall
- as a wrapper
- fix import related errors in test suite
Signed-off-by: Suraj Banakar <suraj@infracloud.io>
* Use pod namespace from backup when matching PVBs
In #3051, we introduced an additional check to ensure that a PVB matched
a particular pod by checking both the name and the namespace of the pod.
This caused an issue when using a namespace mapping on restore. In the
case where a namespace mapping is being used, the check for whether a
PVB matches a particular pod will fail as the PVB was created for the
original pod namespace and is not aware of the new namespace mapping
being used. This resulted in PVRs not being created for pods that were
being restored into new namespaces. The restic init containers were
being created to wait on the volume restore, however this would cause
the restored pods to block indefinitely as they would be waiting for a
volume restore that was not scheduled.
To fix this, we use the original namespace of the pod from the backup to
match the PVB to the pod being restored, not the new namespace where
the pod is being restored into.
Fixes#3467.
Signed-off-by: Bridget McErlean <bmcerlean@vmware.com>
* Explain why the namespace mapping can't be used
Signed-off-by: Bridget McErlean <bmcerlean@vmware.com>
* Restore API group version by priority
Signed-off-by: F. Gold <fgold@vmware.com>
* Add changelog
Signed-off-by: F. Gold <fgold@vmware.com>
* Correct spelling
Signed-off-by: F. Gold <fgold@vmware.com>
* Refactor userResourceGroupVersionPriorities(...) to accept config map, adjust unit test
Signed-off-by: F. Gold <fgold@vmware.com>
* Move some unit tests into e2e
Signed-off-by: F. Gold <fgold@vmware.com>
* Add three e2e tests using Testify Suites
Summary of changes
Makefile - add testify e2e test target
go.sum - changed with go mod tidy
pkg/install/install.go - increased polling timeout
test/e2e/restore_priority_group_test.go - deleted
test/e2e/restore_test.go - deleted
test/e2e/velero_utils.go - made restic optional in velero install
test/e2e_testify/Makefile - makefile for testify e2e tests
test/e2e_testify/README.md - example command for running tests
test/e2e_testify/common_test.go - helper functions
test/e2e_testify/e2e_suite_test.go - prepare for tests and run
test/e2e_testify/restore_priority_apigv_test.go - test cases
Signed-off-by: F. Gold <fgold@vmware.com>
* Make changes per @nrb code review
Signed-off-by: F. Gold <fgold@vmware.com>
* Wait for pods in e2e tests
Signed-off-by: F. Gold <fgold@vmware.com>
* Remove testify suites e2e scaffolding moved to PR #3354
Signed-off-by: F. Gold <fgold@vmware.com>
* Make changes per @brito-rafa and Velero maintainers code reviews
- Made changes suggested by @brito-rafa in GitHub.
- We had a code review meeting with @carlisia, @dsu-igeek, @zubron, and @nrb
- and changes were made based on their suggetions:
- pull in logic from 'meetsAPIGVResotreReqs()' to restore.go.
- add TODO to remove APIGroupVersionFeatureFlag check
- have feature flag and backup version format checks in separate `if` statements.
- rename variables to be sourceGVs, targetGVs, and userGVs.
Signed-off-by: F. Gold <fgold@vmware.com>
* Convert Testify Suites e2e tests to existing Ginkgo framework
Signed-off-by: F. Gold <fgold@vmware.com>
* Made changes per @zubron PR review
Signed-off-by: F. Gold <fgold@vmware.com>
* Run go mod tidy after resolving go.sum merge conflict
Signed-off-by: F. Gold <fgold@vmware.com>
* Add feature documentation to velero.io site
Signed-off-by: F. Gold <fgold@vmware.com>
* Add config map e2e test; rename e2e test file and name
Signed-off-by: F. Gold <fgold@vmware.com>
* Update go.{mod,sum} files
Signed-off-by: F. Gold <fgold@vmware.com>
* Move CRDs and CRs to testdata folder
Signed-off-by: F. Gold <fgold@vmware.com>
* Fix typos in cert-manager to pass codespell CICD check
Signed-off-by: F. Gold <fgold@vmware.com>
* Make changes per @nrb code review round 2
- make checkAndReadDir function private
- add info level messages when priorties 1-3 API group versions can not be used
Signed-off-by: F. Gold <fgold@vmware.com>
* Make user config map rules less strict
Signed-off-by: F. Gold <fgold@vmware.com>
* Update e2e test image version in example
Signed-off-by: F. Gold <fgold@vmware.com>
* Update case A music-system controller code
Signed-off-by: F. Gold <fgold@vmware.com>
* Documentation updates
Signed-off-by: F. Gold <fgold@vmware.com>
* Update migration case documentation
Signed-off-by: F. Gold <fgold@vmware.com>
* Use label to select Velero deployment in plugin cmd
Signed-off-by: F. Gold <fgold@vmware.com>
* Move veleroLabel constant closer to usage
Signed-off-by: F. Gold <fgold@vmware.com>
* Add changelog
Signed-off-by: F. Gold <fgold@vmware.com>
* Remove year from copyright in new file
Signed-off-by: F. Gold <fgold@vmware.com>
* Export and use install.Labels() function
Signed-off-by: F. Gold <fgold@vmware.com>
* Add colors to describe command
* Add colors to describe backups/restore/schedules commands
* Make name in the output bold
* Disable colors via `--colorized` flag or if velero isn't in TTY
Co-authored-by: Clay Kauzlaric <ckauzlaric@vmware.com>
Signed-off-by: Clay Kauzlaric <ckauzlaric@vmware.com>
Signed-off-by: Mikael Manukyan <mmanukyan@vmware.com>
* Add changelog
* and run make update
Co-authored-by: Mikael Manukyan <mmanukyan@vmware.com>
Signed-off-by: Mikael Manukyan <mmanukyan@vmware.com>
Signed-off-by: Clay Kauzlaric <ckauzlaric@vmware.com>
* Add colorized to the client config file
Co-authored-by: Mikael Manukyan <mmanukyan@vmware.com>
Signed-off-by: Clay Kauzlaric <ckauzlaric@vmware.com>
Co-authored-by: Mikael Manukyan <mmanukyan@vmware.com>
* allow client config to use string values
* the command `velero client config set colorized=false` writes a string
value of "false" into the config. This change allows that string to be
accepted and converted into a boolean when used in program.
Signed-off-by: Clay Kauzlaric <ckauzlaric@vmware.com>
* Add docs about colored CLI output
Co-authored-by: Mikael Manukyan <mmanukyan@vmware.com>
Signed-off-by: Clay Kauzlaric <ckauzlaric@vmware.com>
* Update site/content/docs/main/customize-installation.md
Co-authored-by: JenTing Hsiao <jenting.hsiao@suse.com>
Signed-off-by: Clay Kauzlaric <ckauzlaric@vmware.com>
* docs: remove comma
* as per @carlisia 's suggestion
Signed-off-by: Clay Kauzlaric <ckauzlaric@vmware.com>
Co-authored-by: Clay Kauzlaric <ckauzlaric@vmware.com>
Co-authored-by: Clay Kauzlaric <clay.kauzlaric@gmail.com>
Co-authored-by: JenTing Hsiao <jenting.hsiao@suse.com>
* added useOwnerReferencesInBackup to crd velerio.io_schedules
Signed-off-by: matheusjuvelino <matheus.juvelino@outlook.com>
* added UseOwnerReferencesInBackup property to schedule.go
Signed-off-by: matheusjuvelino <matheus.juvelino@outlook.com>
* deepcopy schedule configured for reference the property UseOwnerReferencesInBackup
Signed-off-by: matheusjuvelino <matheus.juvelino@outlook.com>
* added UseOwnerReferencesInBackup property verification to modify OwnerReferences from backup
Signed-off-by: matheusjuvelino <matheus.juvelino@outlook.com>
* created changelog
Signed-off-by: matheusjuvelino <matheus.juvelino@outlook.com>
* removed deepcopy schedule configured for reference the property UseOwnerReferencesInBackup
Signed-off-by: matheusjuvelino <matheus.juvelino@outlook.com>
* running make update
Signed-off-by: matheusjuvelino <matheus.juvelino@outlook.com>
* running make update
Signed-off-by: matheusjuvelino <matheus.juvelino@outlook.com>
* updated the year at the top of the schedule.go file for 2020
Signed-off-by: matheusjuvelino <matheus.juvelino@outlook.com>
* -> Preserve nodePort support when restoring via "--preserve-nodeports" flag
Signed-off-by: Yusuf Güngör <yusuf.gungor@hepsiburada.com>
* -> Added changelog.
Signed-off-by: Yusuf Güngör <yusuf.gungor@hepsiburada.com>
* -> Unit test added.
-> Using boolptr.IsSetToTrue for bool ptr check.
Signed-off-by: Yusuf Güngör <yusuf.gungor@hepsiburada.com>
* -> Unit test added.
-> Using boolptr.IsSetToTrue for bool ptr check.
Signed-off-by: Yusuf Güngör <yusuf.gungor@hepsiburada.com>
* -> Other restore errors log level changed from info to error.
-> Documentation updated about Velero nodePort restore logic and preservation of them.
Signed-off-by: Yusuf Güngör <yusuf.gungor@hepsiburada.com>
Co-authored-by: Yusuf Güngör <yusuf.gungor@hepsiburada.com>
* Add default field to BSL CRD
Signed-off-by: JenTing Hsiao <jenting.hsiao@suse.com>
* Add a new flag `--default` under `velero backup-location create`
add a new flag `--default` under `velero backup-location create`
to specify this new location to be the new default BSL.
Signed-off-by: JenTing Hsiao <jenting.hsiao@suse.com>
* Add a new default field under `velero backup-location get`
add a new default field under `velero backup-location get` to indicate
which BSL is the default one.
Signed-off-by: JenTing Hsiao <jenting.hsiao@suse.com>
* Add a new sub-command and flag under `velero backup-location`
Add a new sub-command called `velero backup-location set` sub-command
and a new flag `velero backup-cation set --default` to configure which
BSL is the default one.
Signed-off-by: JenTing Hsiao <jenting.hsiao@suse.com>
* Add new flag to get the default backup-location
Add a new flag `--default` under `velero backup-location get`
to displays the current default BSL.
Signed-off-by: JenTing Hsiao <jenting.hsiao@suse.com>
* Configures default BSL in BSL controller
When upgrade the BSL CRDs, none of the BSL has been labeled as default.
Sets the BSL default field to true if the BSL name matches to the default BSL setting.
Signed-off-by: JenTing Hsiao <jenting.hsiao@suse.com>
* Configures the default BSL in BSL controller for velero upgrade
When upgrade the BSL CRDs, none of the BSL be marked as the default.
Sets the BSL `.spec.default: true` if the BSL name matches against the
`velero server --default-backup-storage-location`.
Signed-off-by: JenTing Hsiao <jenting.hsiao@suse.com>
* Add unit test to test default BSL behavior
Signed-off-by: JenTing Hsiao <jenting.hsiao@suse.com>
* Update check which one is the default BSL in backup/backup_sync/restore controller
Signed-off-by: JenTing Hsiao <jenting.hsiao@suse.com>
* Add changelog
Signed-off-by: JenTing Hsiao <jenting.hsiao@suse.com>
* Update docs locations.md and upgrade-to-1.6.md
Signed-off-by: JenTing Hsiao <jenting.hsiao@suse.com>
* 🐛 BSLs with validation disabled should be validated at least once
Signed-off-by: Ashish Amarnath <ashisham@vmware.com>
* review comments
Signed-off-by: Ashish Amarnath <ashisham@vmware.com>
* feat: add delete sub-command for backup-location
Signed-off-by: JenTing Hsiao <jenting.hsiao@suse.com>
* Change to use kubebuilder/runtimecontroller API
Signed-off-by: JenTing Hsiao <jenting.hsiao@suse.com>
* fix get BSL by label doesn't work
Signed-off-by: JenTing Hsiao <jenting.hsiao@suse.com>
* Update changelog
Signed-off-by: JenTing Hsiao <jenting.hsiao@suse.com>
* Ordering by alphabet
Signed-off-by: JenTing Hsiao <jenting.hsiao@suse.com>
* Better example format for help message
Signed-off-by: JenTing Hsiao <jenting.hsiao@suse.com>
* Capital the comments
Signed-off-by: JenTing Hsiao <jenting.hsiao@suse.com>
* Don't fail backup if downloading tarball fails
Previously, we would always attempt to download the tarball for a backup
for processing DeleteItemAction plugins, even if there weren't any.
This caused an issue for some users in the case where the backup tarball
had been deleted from object storage as the backup deletion would fail.
Now, we only attempt to download the tarball in the case where there are
DeleteItemAction plugins. If downloading that tarball fails, we log
the error, skip the processing of the DeleteItemAction plugins and
proceed with the rest of the deletion.
Signed-off-by: Bridget McErlean <bmcerlean@vmware.com>
* Skip file removal in closeAndRemoveFile if nil
Signed-off-by: Bridget McErlean <bmcerlean@vmware.com>
* Basic end-to-end tests, generate data/backup/remove/restore/verify
Uses distributed data generator
Signed-off-by: Dave Smith-Uchida <dsmithuchida@vmware.com>
* Moved backup/restore into velero_utils, started using a name for the restore
Signed-off-by: Dave Smith-Uchida <dsmithuchida@vmware.com>
* remove checked in binary and update test/e2e Makefile
Signed-off-by: Ashish Amarnath <ashisham@vmware.com>
* Ran make update
Signed-off-by: Dave Smith-Uchida <dsmithuchida@vmware.com>
* Save
Signed-off-by: Ashish Amarnath <ashisham@vmware.com>
* Ran make update
Signed-off-by: Dave Smith-Uchida <dsmithuchida@vmware.com>
* Basic end-to-end test, generate data/backup/remove/restore/verify
Uses distributed data generator
Signed-off-by: Dave Smith-Uchida <dsmithuchida@vmware.com>
* Changed tests/e2e Makefile to just use go get to install ginkgo in the GOPATH/bin
Updated to ginkgo 1.14.2
Put cobra back to v0.0.7
Signed-off-by: Dave Smith-Uchida <dsmithuchida@vmware.com>
* Added CLOUD_PLATFORM env variable to Makefile, updated README, removed ginkgo from .gitignore
Signed-off-by: Dave Smith-Uchida <dsmithuchida@vmware.com>
* choose velero CLI binary based on local env
Signed-off-by: Ashish Amarnath <ashisham@vmware.com>
Co-authored-by: Ashish Amarnath <ashisham@vmware.com>
By running the following command:
codespell -S .git,*.png,*.jpg,*.woff,*.ttf,*.gif,*.ico -L \
iam,aks,ist,bridget,ue
Signed-off-by: Mateusz Gozdek <mgozdekof@gmail.com>
* fixing label for 'velero.io/change-pvc-node-selector' plugin in site document
Signed-off-by: mayank <mayank.patel@mayadata.io>
* Fixing "velero.io/change-pvc-node-selector" to fetch config using plugin name
Signed-off-by: mayank <mayank.patel@mayadata.io>
* adding changelog
Signed-off-by: mayank <mayank.patel@mayadata.io>
This change modifies the kubebuilder annotations for the Velero CRDs to
include `additionalPrinterColumns` so that more information is exposed
when using `kubectl get`.
For each of the CRDs, annotations have been added to make the output
for `kubectl get` match the output from the equivalent `velero get`
command as closely as possible. There are some cases where this output
could not be replicated, such as the `EXPIRES` column for Backups, due
to the limitations of JSONPath expressions within the resulting CRD
defition. Some columns undergo processing and formatting before being
printed by the Velero CLI which cannot be replicated using JSONPath. In
these cases, these printer columns have been omitted.
For other CRDs where there is no `velero get` equivalent, such as
`PodVolumeBackup` and `PodVolumeRestore`, a best effort has been made to
expose information that provides value.
Signed-off-by: Bridget McErlean <bmcerlean@vmware.com>
* Adding handling of restic-wait init container at any order with warning.
Signed-off-by: Piper Dougherty <doughertypiper@gmail.com>
* Adding newline at end of files to match convention.
Signed-off-by: Piper Dougherty <doughertypiper@gmail.com>
* Formatting.
Signed-off-by: Piper Dougherty <doughertypiper@gmail.com>
* Update copyright year on modified files.
Signed-off-by: Piper Dougherty <doughertypiper@gmail.com>
* Only remove the UID from a PV's claimRef
The UID is the only part of a claimRef that might prevent it from being
rebound correctly on a restore. The namespace and name within the
claimRef should be preserved in order to ensure that the PV is claimed
by the correct PVC on restore.
Signed-off-by: Nolan Brubaker <brubakern@vmware.com>
* Remap PVs claimRef.namespace on relevant restores
When remapping namespaces, any included PVs need to have their claimRef
updated to point remapped namespaces to the new namespace name in order
to be bound to the correct PVC.
Signed-off-by: Nolan Brubaker <brubakern@vmware.com>
* Update tests and ensure claimRef namespace remaps
Signed-off-by: Nolan Brubaker <brubakern@vmware.com>
* Remove lowercased uid field from unstructured PV
Signed-off-by: Nolan Brubaker <brubakern@vmware.com>
* Fix issues that prevented PVs from being restored
Signed-off-by: Nolan Brubaker <brubakern@vmware.com>
* Add changelog
Signed-off-by: Nolan Brubaker <brubakern@vmware.com>
* Dynamically reprovision volumes without snapshots
Signed-off-by: Nolan Brubaker <brubakern@vmware.com>
* Update test for lower case uid field
Signed-off-by: Nolan Brubaker <brubakern@vmware.com>
* Remove stray debugging print statement
Signed-off-by: Nolan Brubaker <brubakern@vmware.com>
* Fix typo, remove extra code, add tests.
Signed-off-by: Nolan Brubaker <brubakern@vmware.com>
* create CRB with velero-<namespace>
This will allow creating multiple instances of velero,
across two different namespaces
Signed-off-by: Alay Patel <alay1431@gmail.com>
* add changelog
Signed-off-by: Alay Patel <alay1431@gmail.com>
* add package var DefaultVeleroNamespace and use it wherever needed
Signed-off-by: Alay Patel <alay1431@gmail.com>
* restore proper lowercase/plural CRD resource
This commit restores the proper resource string
"customresourcedefinitions" for CRD. The prior change to
"CustomResourceDefinition" was made because this was being used
in another place to populate the CRD "Kind" field in
remap_crd_version_action.go -- there, just use the correct Kind
string instead of pulling from Resource.
Signed-off-by: Scott Seago <sseago@redhat.com>
* add changelog
Signed-off-by: Scott Seago <sseago@redhat.com>
