* Add block data mover support for Velero backup/restore describe CLI.
Update output tests to accommodate RestoreType in VolumeInfo
This commit addresses the compilation and assertion errors caused by the introduction of `RestoreType` in `VolumeInfo` and the separation of `SnapshotDataMovementInfo` / `PodVolumeInfo` into their backup and restore counterparts. It fixes references across the test fixtures and the print guard conditions in `restore_describer.go`.
* Modify according to comments
* Add missing JSON tag in the VolumeInfo structures.
* Get uploaderType from the DU and DD's dataMover for the data mover volume info.
* Add IncrementalSize in the data mover volume info.
* Add existingVolumeDataPolicy and restoreType in the restore describe CLI output
* Add more UTs.
* Add some fields value setting that were previously missed.
* Fix the timestamp compare error only found in the GitHub action.
Signed-off-by: Xun Jiang <xun.jiang@broadcom.com>
Co-authored-by: Cursor <cursoragent@cursor.com>
* Update CRDs and CLI to support in-place restore (#10038)
Update CRDs(Restore, DataDownload, PodVolumeRestore) and restore create CLI to support in-place restore
Signed-off-by: Wenkai Yin(尹文开) <yinw@vmware.com>
* Update Kopia(filesystem) uploader to support incremental and deleteExtraFile during restore (#10066)
Update Kopia(filesystem) uploader to support incremental and deleteExtraFile during restore
Signed-off-by: Wenkai Yin(尹文开) <yinw@vmware.com>
* Update Restore Exposer and PVC CSI to support in-place restore (#10104)
1. Update Restore Exposer to support exposing with existing PV for in-place restore
2. Update PVC CSI RIA to continue the restore process for in-place restore
Signed-off-by: Wenkai Yin(尹文开) <yinw@vmware.com>
* Update Block uploader to support increase restore (#10244)
Update Block uploader to support increase restore
Signed-off-by: Wenkai Yin(尹文开) <yinw@vmware.com>
* Update Exposer to recreate the target PV if the volume mode is different with the restore PVC (#10257)
Update Exposer to recreate the target PV if the volume mode is different with t
he restore PVC
Signed-off-by: Wenkai Yin(尹文开) <yinw@vmware.com>
* Preserve PVC selected-node annotation via carrier annotation for in-place restore
For in-place volume data restore, the existing PVC is deleted and
recreated. For StorageClasses with the WaitForFirstConsumer volume
binding mode, losing the volume.kubernetes.io/selected-node annotation
could let the scheduler place the recreated workload Pod in a different
zone than the original PV, leaving it stuck in ContainerCreating.
Instead of relying on RestoreItemAction execution order (the generic
PVC RIA unconditionally strips the selected-node annotation), the PVC
CSI RIA now captures the annotation from the existing PVC right before
deleting it and carries it on the target PVC via the Velero-internal
restore.velero.io/inplace-restore-selected-node annotation. The restore
engine translates the carrier back to the Kubernetes annotation after
all RestoreItemActions have run and always strips the carrier so it
never lands on the cluster.
This makes the behavior independent of RIA ordering: the Kubernetes
annotation is stripped by default on every path (including when the
target PVC does not exist and Velero falls back to provisioning a new
PVC), and preservation only happens when the CSI RIA explicitly
captured a value from the existing PVC.
Signed-off-by: chlins <chlins.zhang@gmail.com>
* Update the control path to make the in-place incremental restore with block data mover work E2E (#10410)
Update the control path to make the in-place incremental restore with block data mover work E2E
Signed-off-by: Wenkai Yin(尹文开) <yinw@vmware.com>
---------
Signed-off-by: Wenkai Yin(尹文开) <yinw@vmware.com>
Signed-off-by: chlins <chlins.zhang@gmail.com>
Co-authored-by: chlins <chlins.zhang@gmail.com>
* Report a measured zero incremental instead of erasing it
A CBT incremental with an exactly zero delta -- nothing changed since
the parent -- was reported identically to a backup that moved the whole
device. `velero backup describe --details` printed only
"Moved data Size (bytes): 3221225472" with no incremental line, and
status.incrementalBytes was absent, for a run that transferred nothing.
The best possible CBT outcome displayed as the worst, and was
indistinguishable from a genuine full, a whole-device fallback, or a
backup predating incremental accounting.
The zero was being erased twice. Besides the API status fields,
datapath.BackupResult also carried omitempty, and that struct crosses a
JSON boundary from the data mover pod to the controller (see
micro_service_watcher.go), so the value was destroyed before the
controller could persist it. Every uploader always reports a figure
there, so 0 internally always means "transferred nothing" -- dropping
omitempty is sufficient and correct for that hop.
The API fields move to *int64 rather than just dropping omitempty. The
field shipped in v1.18.0-v1.18.2, so backups exist whose stored volume
info has no incrementalSize at all; with a plain int64 those unmarshal
to 0 and would render "Incremental data Size (bytes): 0", a false claim
of a perfect incremental on a run that never measured one. nil means not
measured, a pointer to 0 means measured zero. Both fields already carry
+optional, so the generated CRD schema is unchanged and no regeneration
is required.
Display gates relax from > 0 to != nil in all three places, including
volumesByPod.Add, whose signature takes *int64 now; the restore describer
passes nil, which is correct since restores measure no incremental.
Verified live: the same zero-delta scenario that reported <none> now
reports 0 and renders "Incremental data Size (bytes): 0", while an older
backup described with the new client still correctly prints no
incremental line at all.
Co-Authored-By: Claude Fable 5 <noreply@anthropic.com>
Signed-off-by: Tiger Kaovilai <tkaovila@redhat.com>
(cherry picked from commit 6c7aa9d588f6d5eab134d4ce19c92b838f45557c)
Signed-off-by: Tiger Kaovilai <tkaovila@redhat.com>
* gofmt: fix import ordering in backup_test.go
Signed-off-by: Tiger Kaovilai <tkaovila@redhat.com>
* Regenerate CRDs for IncrementalBytes pointer type
make update-crd was missed in the original commit. Regenerated with
the pinned controller-gen v0.16.5 to avoid unrelated version-annotation
churn across other CRDs.
Signed-off-by: Tiger Kaovilai <tkaovila@redhat.com>
* Add changelog for #10309
Signed-off-by: Tiger Kaovilai <tkaovila@redhat.com>
* Address review: make IncrementalBytes a pointer to preserve backward compat
Per Lyndon-Li's review on #10309: dropping omitempty on the plain int64
field breaks compatibility with a data mover from release-1.17 or
earlier that predates IncrementalBytes and never writes the key -- the
new controller would unmarshal a zero value ("nothing transferred")
instead of recognizing the field is simply absent ("not measured").
Switch to *int64 with omitempty restored:
- an old mover's omitted key unmarshals to nil ("not measured")
- a current mover's genuine zero still serializes the key, unmarshaling
to a non-nil pointer to 0 ("measured zero")
- nonzero values work exactly as before
- an old controller can still unmarshal a numeric value from a new mover
pkg/controller/data_upload_controller.go and pod_volume_backup_controller.go
assign the wire-struct field directly to their already-*int64,omitempty
CRD status field instead of re-wrapping it with ptr.To, since both are
now the same pointer type.
Signed-off-by: Tiger Kaovilai <tkaovila@redhat.com>
* Fix CI: update marshal-fail test assertions for IncrementalBytes pointer
Both backup_micro_service_test.go files hardcoded the %v-formatted
zero-value BackupResult struct in an error-message assertion. Now that
IncrementalBytes is *int64, its zero value prints as <nil> instead of 0.
Signed-off-by: Tiger Kaovilai <tkaovila@redhat.com>
---------
Signed-off-by: Tiger Kaovilai <tkaovila@redhat.com>
Co-authored-by: Claude Fable 5 <noreply@anthropic.com>
Add --default-resource-modifier-configmap to the install CLI and
deployment builder so administrators can configure it during velero
install. Wire through VeleroOptions and podTemplateConfig following
the existing --backup-repository-configmap pattern.
Add SkipDefaultResourceModifier builder method to RestoreBuilder.
Signed-off-by: Shubham Pampattiwar <spampatt@redhat.com>
* Support overriding Schedule annotations via template.metadata.annotations
Adds an Annotations field to BackupSpec.Metadata, mirroring the existing
Labels override. When Schedule.Spec.Template.Metadata.Annotations is set,
it is used for the resulting Backup's annotations instead of copying
Schedule.Annotations directly, allowing users to opt out of unwanted
annotations (e.g. ArgoCD tracking annotations) being propagated from
Schedule to Backup.
Fixes#5836
Signed-off-by: Lubron Zhan <lubronzhan@gmail.com>
* Rename changelog fragment to match PR number 10045
Signed-off-by: Lubron Zhan <lubronzhan@gmail.com>
---------
Signed-off-by: Lubron Zhan <lubronzhan@gmail.com>
Co-authored-by: Daniel Jiang <daniel.jiang@broadcom.com>
Add resourcePolicy field for restore CRD which is backed by
a configmap that holds ClusterScopedFilterPolicy and
NamespacedFilterPolicies for restore side filtering.
Signed-off-by: Adam Zhang <adam.zhang@broadcom.com>
Ensure plugin init container names satisfy DNS-1123 label constraints
(max 63 chars). Long names are truncated with an 8-char hash suffix to
maintain uniqueness.
Fixes: #9444
Signed-off-by: Michal Pryc <mpryc@redhat.com>
This change enables BSL validation to work when using caCertRef
(Secret-based CA certificate) by resolving the certificate from
the Secret in velero core before passing it to the object store
plugin as 'caCert' in the config map.
This approach requires no changes to provider plugins since they
already understand the 'caCert' config key.
Changes:
- Add SecretStore to objectBackupStoreGetter struct
- Add NewObjectBackupStoreGetterWithSecretStore constructor
- Update Get method to resolve caCertRef from Secret
- Update server.go to use new constructor with SecretStore
- Add CACertRef builder method and unit tests
🤖 Generated with [Claude Code](https://claude.com/claude-code)
Co-Authored-By: Claude Opus 4.5 <noreply@anthropic.com>
Signed-off-by: Tiger Kaovilai <tkaovila@redhat.com>
handleSkippedPVHasRetainPolicy
According to comment, calling executePVAction aims to reset PV's
claimRef, but the reset logic was moved into resetVolumeBindingInfo
since release-1.4.
Signed-off-by: Xun Jiang <blackpigletbruce@gmail.com>
Xun Jiang
Shubham Pampattiwar
Adam Zhang
Michal PrycandGitHub
Scott Seago
Lyndon-Li
lyndon-liandGitHub
Matthieu MORELandGitHub
Xun Jiang
Daniel Jiang
clonefetchandGitHub
qiumingandGitHub
allenxu404