New CLI flags:
- --iam-vault-namespace
- --iam-vault-auth-namespace
- --iam-vault-secret-storage-namespace
Behavior:
- Auth requests use the auth namespace
- KV operations use the secret storage namespace
- If a specific namespace is not set, the shared namespace is used
- With AppRole, different auth and secret namespaces are rejected
Fixes#1565Fixes#1561Fixes#1300
This PR focuses on three main changes:
1. **Prioritizing object-level lock configuration over bucket-level default retention**
When an object is uploaded with a specific retention configuration, it takes precedence over the bucket’s default retention set via `PutObjectLockConfiguration`. If the object’s retention expires, the object must become available for write operations, even if the bucket-level default retention is still active.
2. **Preventing object lock configuration from being disabled once enabled**
To align with AWS S3 behavior, once object lock is enabled for a bucket, it can no longer be disabled. Previously, sending an empty `Enabled` field in the payload would disable object lock. Now, this behavior is removed—an empty `Enabled` field will result in a `MalformedXML` error.
This creates a challenge for integration tests that need to clean up locked objects in order to delete the bucket. To handle this, a method has been implemented that:
* Removes any legal hold if present.
* Applies a temporary retention with a "retain until" date set 3 seconds ahead.
* Waits for 3 seconds before deleting the object and bucket.
3. **Allowing object lock to be enabled on existing buckets via `PutObjectLockConfiguration`**
Object lock can now be enabled on an existing bucket if it wasn’t enabled at creation time.
* If versioning is enabled at the gateway level, the behavior matches AWS S3: object lock can only be enabled when bucket versioning status is `Enabled`.
* If versioning is not enabled at the gateway level, object lock can always be enabled on existing buckets via `PutObjectLockConfiguration`.
* In Azure (which does not support bucket versioning), enabling object lock is always allowed.
This change also fixes the error message returned in this scenario for better clarity.
Fixes#1559Fixes#1330
This PR focuses on three main changes:
1. **Fix object lock error codes and descriptions**
When an object was WORM-protected and delete/overwrite was disallowed due to object lock configurations, the gateway incorrectly returned the `s3.ErrObjectLocked` error code and description. These have now been corrected.
2. **Update `PutObjectRetention` behavior**
Previously, when an object already had a retention mode set, the gateway only allowed modifications if the mode was changed from `GOVERNANCE` to `COMPLIANCE`, and only when the user had the `s3:BypassGovernanceRetention` permission.
The logic has been updated: if the existing retention mode is the same as the one being applied, the operation is now allowed regardless of other factors.
3. **Fix error checks in integration tests (AWS SDK regression)**
Due to an AWS SDK regression, integration tests were previously limited to checking partial error descriptions. This issue seems to be resolved for some actions (though the ticket is still open: https://github.com/aws/aws-sdk-go-v2/issues/2921). Error checks have been reverted back to full description comparisons where possible.
The buildSearchFilter function doesn't need to be exported, and
can use strings.Builder. Add a unit test to make sure this didn't
change any logic.
This will also use the debuglogger to enable debugging.
The debuglogger should be a top level module since we expect
all modules within the project to make use of this. If its
hidden in s3api, then contributors are less likely to make
use of this outside of s3api.
GetObject allows overriding response headers with the following
paramters:
response-cache-control
response-content-disposition
response-content-encoding
response-content-language
response-content-type
response-expires
This is only valid for signed (and pre-singed) requests. An error
is returned for anonymous requests if these are set.
More info on the GetObject overrides can be found in the GetObject
API reference.
This also clarifies the naming of the AccessOptions IsPublicBucket
to IsPublicRequest to indicate this is a public access request
and not just accessing a bucket that allows public access.
Fixes#1501
GetBucketLocation is being deprecated by AWS, but is still used
by some clients. We don't need any backend handlers for this since
the region is managed by the frontend. All we need is to test for
bucket existence, so we can use HeadBucket for this.
Fixes#1499
Fixes#1488
Adds full wildcard (`*`) and single-character (`?`) support for bucket policy actions, fixes resource detection with wildcards, and includes unit tests for `bucket_policy_actions`, `bucket_policy_effect`, and `bucket_policy_principals`.
Fixes#1486
* Adds the `Access-Control-Allow-Headers` response header to CORS responses for both **OPTIONS preflight requests** and any request containing an `Origin` header.
* The `Access-Control-Allow-Headers` response includes only the headers specified in the `Access-Control-Request-Headers` request header, always returned in lowercase.
* Fixes an issue with allow headers comparison in cors evaluation by making it case-insensitive.
* Adds missing unit tests for the **OPTIONS controller**.
Closes#1454
Adds the implementation of [S3 GetBucketPolicyStatus action](https://docs.aws.amazon.com/AmazonS3/latest/API/API_GetBucketPolicyStatus.html). The implementation goes to front-end. Front-End loads the bucket policy and checks if it grants public access to all users.
A bucket policy document `is public` only when `Principal` contains `*`(all users): only when it grants access to `ALL` users.
Closes#1003
**Changes Introduced:**
1. **S3 Bucket CORS Actions**
* Implemented the following S3 bucket CORS APIs:
* `PutBucketCors` – Configure CORS rules for a bucket.
* `GetBucketCors` – Retrieve the current CORS configuration for a bucket.
* `DeleteBucketCors` – Remove CORS configuration from a bucket.
2. **CORS Preflight Handling**
* Added an `OPTIONS` endpoint to handle browser preflight requests.
* The endpoint evaluates incoming requests against bucket CORS rules and returns the appropriate `Access-Control-*` headers.
3. **CORS Middleware**
* Implemented middleware that:
* Checks if a bucket has CORS configured.
* Detects the `Origin` header in the request.
* Adds the necessary `Access-Control-*` headers to the response when the request matches the bucket CORS configuration.
Handle LDAP connection failures by attempting to reconnect.
This should resolve the issue of connections being closed by
the LDAP server after a period of inactivity.
Fixes#1464
Fixes#1388Fixes#1389Fixes#1390Fixes#1401
Adds the `x-amz-copy-source` header validation for `CopyObject` and `UploadPartCopy` in front-end.
The error:
```
ErrInvalidCopySource: {
Code: "InvalidArgument",
Description: "Copy Source must mention the source bucket and key: sourcebucket/sourcekey.",
HTTPStatusCode: http.StatusBadRequest,
},
```
is now deprecated.
The conditional read/write headers validation in `CopyObject` should come with #821 and #822.
The IAM vault client stores an access token once authenticated,
but this token will expire after a certain amount of time set
by the server generating the token. Once this token is expired
or revoked, it can no longer be use by the vault client. So
the client should try to refresh the token with any errors
indicating expired or revoked tokens.
Fixes#976
Add helper util auth.UpdateBucketACLOwner() that sets new
default ACL based on new owner and removes old bucket policy.
The ChangeBucketOwner() remains in the backend.Backend
interface in case there is ever a backend that needs to manage
ownership in some other way than with bucket ACLs. The arguments
are changing to clarify the updated owner. This will break any
plugins implementing the old interface. They should use the new
auth.UpdateBucketACLOwner() or implement the corresponding
change specific for the backend.
The IPA service connections have been seen to not always work
correctly on the first network connection attempt. Add retry
logic for errors that appear to be transient network issues.
This implementation introduces **public buckets**, which are accessible without signature-based authentication.
There are two ways to grant public access to a bucket:
* **Bucket ACLs**
* **Bucket Policies**
Only `Get` and `List` operations are permitted on public buckets. All **write operations** require authentication, regardless of whether public access is granted through an ACL or a policy.
The implementation includes an `AuthorizePublicBucketAccess` middleware, which checks if public access has been granted to the bucket. If so, authentication middlewares are skipped. For unauthenticated requests, appropriate errors are returned based on the specific S3 action.
---
**1. Bucket-Level Operations:**
```json
{
"Version": "2012-10-17",
"Statement": [
{
"Effect": "Allow",
"Principal": "*",
"Action": "s3:*",
"Resource": "arn:aws:s3:::test"
}
]
}
```
**2. Object-Level Operations:**
```json
{
"Version": "2012-10-17",
"Statement": [
{
"Effect": "Allow",
"Principal": "*",
"Action": "s3:*",
"Resource": "arn:aws:s3:::test/*"
}
]
}
```
**3. Both Bucket and Object-Level Operations:**
```json
{
"Version": "2012-10-17",
"Statement": [
{
"Effect": "Allow",
"Principal": "*",
"Action": "s3:*",
"Resource": "arn:aws:s3:::test"
},
{
"Effect": "Allow",
"Principal": "*",
"Action": "s3:*",
"Resource": "arn:aws:s3:::test/*"
}
]
}
```
---
```sh
aws s3api create-bucket --bucket test --object-ownership BucketOwnerPreferred
aws s3api put-bucket-acl --bucket test --acl public-read
```
Closes#1295
Makes the user `role` mutable in /update-user admin endpoint.
Integrates the changes in the `admin update-user` cli command, by adding the `role` flag for a user role modification.
This cleans up a previous fix to #630 to use a better temp/rename
scheme thats less likely to have bad side effects.
The test for the previous issue still passes these cases, and we
will be less liekly to find a case where the file doesnt exist
or corrpted backup files.
If `Statement` field is missing in the json document in `PutBucketPolicy` body, the gateway returns `Missing required field Statement` error description alongside with `MalformedPolicy` error code.
Implements the bucket cors s3 actions in FE to return `NotImplemented` error.
Actions implemented:
- `PutBucketCors`
- `GetBucketCors`
- `DeleteBucketCors`
`Note`: no logic is implemented for the actions in any backend and no input or output data validation is added.
