feat: Always show network info (#1233)

*

Dockerfile

@@ -12,47 +12,63 @@ ARG DEBCONF_NOWARNINGS="yes"
 ARG DEBIAN_FRONTEND="noninteractive"
 ARG DEBCONF_NONINTERACTIVE_SEEN="true"
 
-RUN set -eu && \
+RUN <<EOF
-    apt-get update && \
+  set -eu
-    apt-get --no-install-recommends -y install \
+
-        jq \
+  apt-get update
-        tini \
+  apt-get --no-install-recommends -y install \
-        curl \
+    jq \
-        wget \
+    tini \
-        fdisk \
+    curl \
-        unzip \
+    wget \
-        nginx \
+    fdisk \
-        procps \
+    unzip \
-        ethtool \
+    nginx \
-        python3 \
+    procps \
-        python3-pip \
+    ipcalc \
-        python3-msgpack \
+    ethtool \
-        python3-pysodium \
+    python3 \
-        xz-utils \
+    python3-pip \
-        iptables \
+    python3-msgpack \
-        iproute2 \
+    python3-pysodium \
-        dnsmasq \
+    xz-utils \
-        fakeroot \
+    iptables \
-        apt-utils \
+    iproute2 \
-        net-tools \
+    dnsmasq \
-        e2fsprogs \
+    fakeroot \
-        qemu-utils \
+    apt-utils \
-        websocketd \
+    net-tools \
-        iputils-ping \
+    e2fsprogs \
-        inotify-tools \
+    qemu-utils \
-        ca-certificates \
+    websocketd \
-        netcat-openbsd \
+    iputils-ping \
-        qemu-system-x86 && \
+    inotify-tools \
-    wget "https://github.com/qemus/passt/releases/download/v${VERSION_PASST}/passt_${VERSION_PASST}_${TARGETARCH}.deb" -O /tmp/passt.deb -q --timeout=10 && \
+    ca-certificates \
-    dpkg -i /tmp/passt.deb && \
+    netcat-openbsd \
-    apt-get clean && \
+    qemu-system-x86
-    pip3 install --no-cache-dir --break-system-packages --root-user-action=ignore dissect.cstruct && \
+
-    mkdir -p /etc/qemu && \
+  # Install Passt package
-    echo "allow br0" > /etc/qemu/bridge.conf && \
+  wget "https://github.com/qemus/passt/releases/download/v${VERSION_PASST}/passt_${VERSION_PASST}_${TARGETARCH}.deb" -O /tmp/passt.deb -q --timeout=10
-    unlink /etc/nginx/sites-enabled/default && \
+  dpkg -i /tmp/passt.deb
-    sed -i 's/^worker_processes.*/worker_processes 1;/' /etc/nginx/nginx.conf && \
+
-    echo "$VERSION_ARG" > /etc/version && \
+  apt-get clean
-    rm -rf /var/lib/apt/lists/* /tmp/* /var/tmp/*
+
+  # Install Python dependencies
+  pip3 install --no-cache-dir --break-system-packages --root-user-action=ignore dissect.cstruct
+
+  # Configure QEMU
+  mkdir -p /etc/qemu
+  echo "allow br0" > /etc/qemu/bridge.conf
+
+  # Configure nginx
+  unlink /etc/nginx/sites-enabled/default
+  sed -i 's/^worker_processes.*/worker_processes 1;/' /etc/nginx/nginx.conf
+
+  # Set version file
+  echo "$VERSION_ARG" > /etc/version
+
+  rm -rf /var/lib/apt/lists/* /tmp/* /var/tmp/*
+EOF
 
 COPY --chmod=755 ./src /run/
 COPY --chmod=755 ./web /var/www/

readme.md

@@ -16,9 +16,13 @@ Virtual DSM in a Docker container.
 
 ## Features ✨
 
- - Multiple disks
+- Runs Virtual DSM inside a Docker container
- - KVM acceleration
+- Automatic download of the installation files
- - Automatic download
+- Web-based access to the DSM desktop
+- Near-native performance with KVM acceleration
+- Customizable CPU, memory, and storage allocation
+- Supports multiple disks and physical disk passthrough
+- Supports bridge, user-mode, macvlan, and macvtap networking
 
 ## Usage  🐳
 
@@ -79,7 +83,7 @@ kubectl apply -f https://raw.githubusercontent.com/vdsm/virtual-dsm/refs/heads/m
 
   - Wait until DSM finishes its installation
  
-  - Choose an username and password, and you will be taken to the desktop.
+  - Choose a username and password, and you will be taken to the desktop.
   
   Enjoy your brand new NAS, and don't forget to star this repo!
 

src/check.sh

@@ -1,12 +1,15 @@
 #!/usr/bin/env bash
 set -Eeuo pipefail
 
+cd /run
+. utils.sh      # Load functions
+
 : "${DHCP:="N"}"
 : "${NETWORK:="Y"}"
 
 [ -f "/run/shm/qemu.end" ] && echo "QEMU is shutting down..." && exit 1
 [ ! -s "/run/shm/qemu.pid" ] && echo "QEMU is not running yet..." && exit 0
-[[ "$NETWORK" == [Nn]* ]] && echo "Networking is disabled." && exit 0
+disabled "$NETWORK" && echo "Networking is disabled." && exit 0
 
 file="/run/shm/dsm.url"
 address="/run/shm/qemu.ip"
@@ -18,7 +21,7 @@ location=$(<"$file")
 
 if ! curl -m 20 -ILfSs "http://$location/" > /dev/null; then
 
-  if [[ "$DHCP" == [Yy1]* ]]; then
+  if enabled "$DHCP"; then
     ip=$(<"$address")
     echo "Failed to reach DSM at http://$location"
   else

src/disk.sh

@@ -8,7 +8,7 @@ set -Eeuo pipefail
 : "${DISK_TYPE:=""}"              # Device type to be used, "sata", "nvme", "blk" or "scsi"
 : "${DISK_FLAGS:=""}"             # Specifies the options for use with the qcow2 disk format
 : "${DISK_CACHE:="none"}"         # Caching mode, can be set to 'writeback' for better performance
-: "${DISK_DISCARD:="on"}"         # Controls whether unmap (TRIM) commands are passed to the host.
+: "${DISK_DISCARD:="unmap"}"      # Controls whether unmap (TRIM) commands are passed to the host.
 : "${DISK_ROTATION:="1"}"         # Rotation rate, set to 1 for SSD storage and increase for HDD
 
 # Sanitize all variables
@@ -38,15 +38,9 @@ fmt2ext() {
   local DISK_FMT="$1"
 
   case "${DISK_FMT,,}" in
-    qcow2)
+    qcow2) echo "qcow2" ;;
-      echo "qcow2"
+    raw) echo "img" ;;
-      ;;
+    *) error "Unrecognized disk format: $DISK_FMT" && exit 78 ;;
-    raw)
-      echo "img"
-      ;;
-    *)
-      error "Unrecognized disk format: $DISK_FMT" && exit 78
-      ;;
   esac
 }
 
@@ -54,21 +48,16 @@ ext2fmt() {
   local DISK_EXT="$1"
 
   case "${DISK_EXT,,}" in
-    qcow2)
+    qcow2) echo "qcow2" ;;
-      echo "qcow2"
+    img) echo "raw" ;;
-      ;;
+    *) error "Unrecognized file extension: .$DISK_EXT" && exit 78 ;;
-    img)
-      echo "raw"
-      ;;
-    *)
-      error "Unrecognized file extension: .$DISK_EXT" && exit 78
-      ;;
   esac
 }
 
 getSize() {
+
   local DISK_FILE="$1"
-  local DISK_EXT DISK_FMT
+  local DISK_EXT DISK_FMT size
 
   DISK_EXT=$(echo "${DISK_FILE//*./}" | sed 's/^.*\.//')
   DISK_FMT=$(ext2fmt "$DISK_EXT")
@@ -77,11 +66,19 @@ getSize() {
     raw)
       stat -c%s "$DISK_FILE"
       ;;
+
     qcow2)
-      qemu-img info "$DISK_FILE" -f "$DISK_FMT" | grep '^virtual size: ' | sed 's/.*(\(.*\) bytes)/\1/'
+      size=$(qemu-img info --output=json -f "$DISK_FMT" "$DISK_FILE" | jq -r '."virtual-size" // empty')
+      if [[ ! "$size" =~ ^[0-9]+$ ]]; then
+        error "Failed to determine virtual size of $DISK_FILE"
+        exit 78
+      fi
+      echo "$size"
       ;;
+
     *)
-      error "Unrecognized disk format: $DISK_FMT" && exit 78
+      error "Unrecognized disk format: $DISK_FMT"
+      exit 78
       ;;
   esac
 }
@@ -106,6 +103,82 @@ supportsDirect() {
   return 0
 }
 
+allocateRaw() {
+
+  local DISK_FILE="$1"
+  local DATA_SIZE="$2"
+
+  if disabled "$ALLOCATE"; then
+    truncate -s "$DATA_SIZE" "$DISK_FILE"
+    return $?
+  fi
+
+  fallocate -l "$DATA_SIZE" "$DISK_FILE" &>/dev/null && return 0
+  fallocate -l -x "$DATA_SIZE" "$DISK_FILE" && return 0
+  truncate -s "$DATA_SIZE" "$DISK_FILE" || return 1
+
+  return 0
+}
+
+getDiskOptions() {
+
+  local FS="$1"
+  local DISK_FMT="$2"
+  local DISK_PARAM="$DISK_ALLOC"
+
+  isCow "$FS" && DISK_PARAM+=",nocow=on"
+
+  if [[ "${DISK_FMT,,}" != "raw" ]]; then
+    [ -n "$DISK_FLAGS" ] && DISK_PARAM+=",$DISK_FLAGS"
+  fi
+
+  echo "$DISK_PARAM"
+  return 0
+}
+
+normalizeSize() {
+
+  local DISK_SPACE="$1"
+  local DISK_DESC="$2"
+  local DIR="$3"
+  local SPACE FREE GB DATA_SIZE
+
+  if [[ "${DISK_SPACE,,}" == "max" || "${DISK_SPACE,,}" == "half" ]]; then
+
+    local SPARE=1073741824
+    FREE=$(df --output=avail -B 1 "$DIR" | tail -n 1)
+
+    if [[ "${DISK_SPACE,,}" == "max" ]]; then
+      FREE=$(( FREE - SPARE ))
+    else
+      FREE=$(( FREE / 2 ))
+    fi
+
+    (( FREE < SPARE )) && FREE="$SPARE"
+    GB=$(( FREE / 1073741825 ))
+    DISK_SPACE="${GB}G"
+
+  fi
+
+  SPACE="${DISK_SPACE// /}"
+  [ -z "$SPACE" ] && SPACE="256G"
+  [ -z "${SPACE//[0-9. ]}" ] && SPACE="${SPACE}G"
+  SPACE=$(echo "${SPACE^^}" | sed 's/MB/M/g;s/GB/G/g;s/TB/T/g')
+
+  if ! numfmt --from=iec "$SPACE" &>/dev/null; then
+    error "Invalid value for ${DISK_DESC^^}_SIZE: $DISK_SPACE" && exit 73
+  fi
+
+  DATA_SIZE=$(numfmt --from=iec "$SPACE")
+
+  if (( DATA_SIZE < 6442450944 )); then
+    error "Please increase the ${DISK_DESC^^}_SIZE variable to at least 6 GB." && exit 73
+  fi
+
+  echo "$SPACE"
+  return 0
+}
+
 createDisk() {
 
   local DISK_FILE="$1"
@@ -148,33 +221,15 @@ createDisk() {
         { chattr +C "$DISK_FILE"; } || :
       fi
 
-      if disabled "$ALLOCATE"; then
+      if ! allocateRaw "$DISK_FILE" "$DATA_SIZE"; then
-
+        rm -f "$DISK_FILE"
-        # Create an empty file
+        error "$FAIL" && exit 77
-        if ! truncate -s "$DATA_SIZE" "$DISK_FILE"; then
-          rm -f "$DISK_FILE"
-          error "$FAIL" && exit 77
-        fi
-
-      else
-
-        # Create an empty file
-        if ! fallocate -l "$DATA_SIZE" "$DISK_FILE" &>/dev/null; then
-          if ! fallocate -l -x "$DATA_SIZE" "$DISK_FILE"; then
-            if ! truncate -s "$DATA_SIZE" "$DISK_FILE"; then
-              rm -f "$DISK_FILE"
-              error "$FAIL" && exit 77
-            fi
-          fi
-        fi
-
       fi
       ;;
     qcow2)
 
-      local DISK_PARAM="$DISK_ALLOC"
+      local DISK_PARAM
-      isCow "$FS" && DISK_PARAM+=",nocow=on"
+      DISK_PARAM=$(getDiskOptions "$FS" "$DISK_FMT")
-      [ -n "$DISK_FLAGS" ] && DISK_PARAM+=",$DISK_FLAGS"
 
       if ! qemu-img create -f "$DISK_FMT" -o "$DISK_PARAM" -- "$DISK_FILE" "$DATA_SIZE" ; then
         rm -f "$DISK_FILE"
@@ -202,7 +257,7 @@ resizeDisk() {
   local FS="$5"
   local CUR_SIZE DATA_SIZE DIR SPACE GB
 
-  CUR_SIZE=$(getSize "$DISK_FILE")
+  CUR_SIZE=$(getSize "$DISK_FILE") || exit 71
   DATA_SIZE=$(numfmt --from=iec "$DISK_SPACE")
   local REQ=$(( DATA_SIZE - CUR_SIZE ))
   (( REQ < 1 )) && error "Shrinking disks is not supported yet, please increase ${DISK_DESC^^}_SIZE." && exit 71
@@ -230,24 +285,8 @@ resizeDisk() {
   case "${DISK_FMT,,}" in
     raw)
 
-      if disabled "$ALLOCATE"; then
+      if ! allocateRaw "$DISK_FILE" "$DATA_SIZE"; then
-
+        error "$FAIL" && exit 75
-        # Resize file by changing its length
-        if ! truncate -s "$DATA_SIZE" "$DISK_FILE"; then
-          error "$FAIL" && exit 75
-        fi
-
-      else
-
-        # Resize file by allocating more space
-        if ! fallocate -l "$DATA_SIZE" "$DISK_FILE" &>/dev/null; then
-          if ! fallocate -l -x "$DATA_SIZE" "$DISK_FILE"; then
-            if ! truncate -s "$DATA_SIZE" "$DISK_FILE"; then
-              error "$FAIL" && exit 75
-            fi
-          fi
-        fi
-
       fi
       ;;
     qcow2)
@@ -286,7 +325,7 @@ convertDisk() {
     local CUR_SIZE SPACE GB
 
     # Check free diskspace
-    CUR_SIZE=$(getSize "$SOURCE_FILE")
+    CUR_SIZE=$(getSize "$SOURCE_FILE") || exit 79
     SPACE=$(df --output=avail -B 1 "$DIR" | tail -n 1)
 
     if (( CUR_SIZE > SPACE )); then
@@ -302,14 +341,13 @@ convertDisk() {
   info "$msg, please wait until completed..."
 
   local CONV_FLAGS="-p"
-  local DISK_PARAM="$DISK_ALLOC"
+  local DISK_PARAM
-  isCow "$FS" && DISK_PARAM+=",nocow=on"
+  DISK_PARAM=$(getDiskOptions "$FS" "$DST_FMT")
 
   if [[ "$DST_FMT" != "raw" ]]; then
     if disabled "$ALLOCATE"; then
       CONV_FLAGS+=" -c"
     fi
-    [ -n "$DISK_FLAGS" ] && DISK_PARAM+=",$DISK_FLAGS"
   fi
 
   # shellcheck disable=SC2086
@@ -330,8 +368,17 @@ convertDisk() {
     fi
   fi
 
-  rm -f "$SOURCE_FILE"
+  if ! rm -f "$SOURCE_FILE"; then
-  mv "$TMP_FILE" "$DST_FILE"
+    rm -f "$TMP_FILE"
+    error "Failed to remove old $DISK_DESC image $SOURCE_FILE."
+    exit 79
+  fi
+
+  if ! mv "$TMP_FILE" "$DST_FILE"; then
+    rm -f "$TMP_FILE"
+    error "Failed to move converted $DISK_DESC image to $DST_FILE."
+    exit 79
+  fi
 
   if isCow "$FS"; then
     FA=$(lsattr "$DST_FILE")
@@ -460,7 +507,7 @@ addDisk () {
   local DISK_FMT="$7"
   local DISK_IO="$8"
   local DISK_CACHE="$9"
-  local DISK_EXT DIR SPACE GB DATA_SIZE FS PREV_FMT PREV_EXT CUR_SIZE LEFT FREE USED
+  local DISK_EXT DIR SPACE DATA_SIZE FS PREV_FMT PREV_EXT CUR_SIZE LEFT FREE USED
 
   DISK_EXT=$(fmt2ext "$DISK_FMT")
   local DISK_FILE="$DISK_BASE.$DISK_EXT"
@@ -468,38 +515,9 @@ addDisk () {
   DIR=$(dirname "$DISK_FILE")
   [ ! -d "$DIR" ] && return 0
 
-  if [[ "${DISK_SPACE,,}" == "max" || "${DISK_SPACE,,}" == "half" ]]; then
+  SPACE=$(normalizeSize "$DISK_SPACE" "$DISK_DESC" "$DIR")
-
-    local SPARE=1073741824
-    FREE=$(df --output=avail -B 1 "$DIR" | tail -n 1)
-
-    if [[ "${DISK_SPACE,,}" == "max" ]]; then
-      FREE=$(( FREE - SPARE ))
-    else
-      FREE=$(( FREE / 2 ))
-    fi
-
-    (( FREE < SPARE )) && FREE="$SPARE"
-    GB=$(( FREE / 1073741825 ))
-    DISK_SPACE="${GB}G"
-
-  fi
-
-  SPACE="${DISK_SPACE// /}"
-  [ -z "$SPACE" ] && SPACE="256G"
-  [ -z "${SPACE//[0-9. ]}" ] && SPACE="${SPACE}G"
-  SPACE=$(echo "${SPACE^^}" | sed 's/MB/M/g;s/GB/G/g;s/TB/T/g')
-
-  if ! numfmt --from=iec "$SPACE" &>/dev/null; then
-    error "Invalid value for ${DISK_DESC^^}_SIZE: $DISK_SPACE" && exit 73
-  fi
-
   DATA_SIZE=$(numfmt --from=iec "$SPACE")
 
-  if (( DATA_SIZE < 6442450944 )); then
-    error "Please increase the ${DISK_DESC^^}_SIZE variable to at least 6 GB." && exit 73
-  fi
-
   FS=$(stat -f -c %T "$DIR")
   checkFS "$FS" "$DISK_FILE" "$DISK_DESC" || exit $?
 
@@ -526,7 +544,7 @@ addDisk () {
 
   if [ -s "$DISK_FILE" ]; then
 
-    CUR_SIZE=$(getSize "$DISK_FILE")
+    CUR_SIZE=$(getSize "$DISK_FILE") || exit 71
 
     if (( DATA_SIZE > CUR_SIZE )); then
 
@@ -551,13 +569,15 @@ addDisk () {
 
   if [ -f "$DISK_FILE" ] && disabled "$ALLOCATE"; then
 
-    CUR_SIZE=$(getSize "$DISK_FILE")
+    CUR_SIZE=$(getSize "$DISK_FILE") || exit 73
     USED=$(du -sB 1 "$DISK_FILE" | cut -f1)
     FREE=$(df --output=avail -B 1 "$DIR" | tail -n 1)
     LEFT=$(( CUR_SIZE - USED - FREE ))
+    (( LEFT < 0 )) && LEFT=0
 
     if (( LEFT > 0 )); then
 
+      local GB
       GB=$(formatBytes "$FREE")
       LEFT=$(formatBytes "$LEFT")
       CUR_SIZE=$(formatBytes "$CUR_SIZE")
@@ -603,18 +623,22 @@ addDevice () {
   # Only detect and apply sector sizes for partitions, not whole disks
   # Whole disk passthrough with explicit sector sizes causes DSM not to recognize the disk
   if [[ "$dev_type" == "part" ]]; then
-    local result logical physical
+    local result=""
-    result=$(fdisk -l "$DISK_DEV" | grep -m 1 -o "(logical/physical): .*" | cut -c 21-)
+    local logical=""
-    logical="${result%% *}"
+    local physical=""
-    physical=$(echo "$result" | grep -m 1 -o "/ .*" | cut -c 3-)
-    physical="${physical%% *}"
 
-    if [ -n "$physical" ]; then
+    result=$(fdisk -l "$DISK_DEV" 2>/dev/null | grep -m 1 -o "(logical/physical): .*" | cut -c 21- || true)
-      if [[ "$physical" != "512" ]]; then
+
-        sectors=",logical_block_size=$logical,physical_block_size=$physical"
+    if [ -n "$result" ]; then
-      fi
+      logical="${result%% *}"
-    else
+      physical=$(echo "$result" | grep -m 1 -o "/ .*" | cut -c 3- || true)
+      physical="${physical%% *}"
+    fi
+
+    if [ -z "$logical" ] || [ -z "$physical" ]; then
       warn "Failed to determine the sector size for $DISK_DEV"
+    elif [[ "$physical" != "512" ]]; then
+      sectors=",logical_block_size=$logical,physical_block_size=$physical"
     fi
   fi
 
@@ -634,11 +658,45 @@ if ! enabled "$DISK_DISABLE"; then
   enabled "$DEBUG" && echo "$msg"
 fi
 
+if [[ "${DISK_IO,,}" == "native" && "${DISK_CACHE,,}" != "none" && "${DISK_CACHE,,}" != "directsync" ]]; then
+  warn "DISK_IO=native requires direct I/O caching, using DISK_IO=threads with DISK_CACHE=$DISK_CACHE."
+  DISK_IO="threads"
+fi
+
+case "${DISK_DISCARD,,}" in
+  "y" | "yes" | "true" | "1" | "on" | "unmap" )
+    DISK_DISCARD="unmap" ;;
+
+  "n" | "no" | "false" | "0" | "off" | "ignore" )
+    DISK_DISCARD="ignore" ;;
+
+  * )
+    warn "Invalid DISK_DISCARD value '$DISK_DISCARD', using 'unmap'."
+    DISK_DISCARD="unmap" ;;
+esac
+
+if [[ ! "$DISK_ROTATION" =~ ^[0-9]+$ ]]; then
+  warn "Invalid DISK_ROTATION value '$DISK_ROTATION', using 1."
+  DISK_ROTATION="1"
+fi
+
+DISK_FMT="${DISK_FMT,,}"
+
+case "$DISK_FMT" in
+  "raw" | "qcow2" ) ;;
+  * ) error "Invalid DISK_FMT specified, value \"$DISK_FMT\" is not recognized!" && exit 78 ;;
+esac
+
 case "${DISK_TYPE,,}" in
-  "ide" | "sata" | "nvme" | "usb" | "scsi" | "blk" | "auto" | "none" ) ;;
+  "ide" | "sata" | "nvme" | "usb" | "scsi" | "blk" | "virtio-blk" | "virtio-scsi" | "auto" | "none" ) ;;
   * ) error "Invalid DISK_TYPE specified, value \"$DISK_TYPE\" is not recognized!" && exit 80 ;;
 esac
 
+if [[ "$DISK_FLAGS" =~ [[:space:]] ]]; then
+  error "Invalid DISK_FLAGS value '$DISK_FLAGS', spaces are not allowed."
+  exit 78
+fi
+
 if [ -z "$ALLOCATE" ]; then
   ALLOCATE="N"
 fi
@@ -684,29 +742,22 @@ DISK4_FILE="/storage4/${DISK_NAME}4"
 [ -z "$DEVICE3" ] && [ -b "/dev/disk3" ] && DEVICE3="/dev/disk3"
 [ -z "$DEVICE4" ] && [ -b "/dev/disk4" ] && DEVICE4="/dev/disk4"
 
-if [ -n "$DEVICE" ]; then
+DISK_FILES=( "$DISK1_FILE" "$DISK2_FILE" "$DISK3_FILE" "$DISK4_FILE" )
-  addDevice "$DEVICE" "$DISK_TYPE" "3" "0xc" || exit $?
+DISK_DESCS=( "disk" "disk2" "disk3" "disk4" )
-else
+DISK_SIZES=( "$DISK_SIZE" "$DISK2_SIZE" "$DISK3_SIZE" "$DISK4_SIZE" )
-  addDisk "$DISK1_FILE" "$DISK_TYPE" "disk" "$DISK_SIZE" "3" "0xc" "$DISK_FMT" "$DISK_IO" "$DISK_CACHE" || exit $?
+DISK_DEVICES=( "$DEVICE" "$DEVICE2" "$DEVICE3" "$DEVICE4" )
-fi
+DISK_INDEXES=( "3" "4" "5" "6" )
+DISK_ADDRESSES=( "0xc" "0xd" "0xe" "0xf" )
 
-if [ -n "$DEVICE2" ]; then
+for i in "${!DISK_FILES[@]}"; do
-  addDevice "$DEVICE2" "$DISK_TYPE" "4" "0xd" || exit $?
-else
-  addDisk "$DISK2_FILE" "$DISK_TYPE" "disk2" "$DISK2_SIZE" "4" "0xd" "$DISK_FMT" "$DISK_IO" "$DISK_CACHE" || exit $?
-fi
 
-if [ -n "$DEVICE3" ]; then
+  if [ -n "${DISK_DEVICES[i]}" ]; then
-  addDevice "$DEVICE3" "$DISK_TYPE" "5" "0xe" || exit $?
+    addDevice "${DISK_DEVICES[i]}" "$DISK_TYPE" "${DISK_INDEXES[i]}" "${DISK_ADDRESSES[i]}" || exit $?
-else
+  else
-  addDisk "$DISK3_FILE" "$DISK_TYPE" "disk3" "$DISK3_SIZE" "5" "0xe" "$DISK_FMT" "$DISK_IO" "$DISK_CACHE" || exit $?
+    addDisk "${DISK_FILES[i]}" "$DISK_TYPE" "${DISK_DESCS[i]}" "${DISK_SIZES[i]}" "${DISK_INDEXES[i]}" "${DISK_ADDRESSES[i]}" "$DISK_FMT" "$DISK_IO" "$DISK_CACHE" || exit $?
-fi
+  fi
 
-if [ -n "$DEVICE4" ]; then
+done
-  addDevice "$DEVICE4" "$DISK_TYPE" "6" "0xf" || exit $?
-else
-  addDisk "$DISK4_FILE" "$DISK_TYPE" "disk4" "$DISK4_SIZE" "6" "0xf" "$DISK_FMT" "$DISK_IO" "$DISK_CACHE" || exit $?
-fi
 
 finishDisks
 

src/install.sh

@@ -205,11 +205,12 @@ fi
 MSG="Preparing system partition..."
 info "Install: $MSG" && html "$MSG"
 
-BOOT=$(find "$TMP" -name "*.bin.zip")
+BOOT=$(find "$TMP" -name "*.bin.zip" -print -quit)
-[ ! -s "$BOOT" ] && error "The PAT file contains no boot image." && exit 67
+[ -z "$BOOT" ] && error "The PAT file contains no boot image." && exit 67
+[ ! -s "$BOOT" ] && error "The PAT boot image archive is empty." && exit 67
 
-BOOT=$(echo "$BOOT" | head -c -5)
+unzip -q -o "$BOOT" -d "$TMP"
-unzip -q -o "$BOOT".zip -d "$TMP"
+BOOT="${BOOT%.zip}"
 
 SYSTEM="$STORAGE/$BASE.system.img"
 rm -f "$SYSTEM"
@@ -281,8 +282,9 @@ mv "$HDA.tgz" "$HDA.txz"
 [ -d "$PKG" ] && mv "$PKG/" "$MOUNT/.SynoUpgradePackages/"
 rm -f "$MOUNT/.SynoUpgradePackages/ActiveInsight-"*
 
+INDEX_DB="$MOUNT/usr/syno/synoman/indexdb"
+
 if [ -s "$IDB.txz" ]; then
-  INDEX_DB="$MOUNT/usr/syno/synoman/indexdb"
   mkdir -p "$INDEX_DB"
 fi
 

src/memory.sh

@@ -7,7 +7,13 @@ enabled "$DEBUG" && echo "$msg"
 RAM_AVAIL=$(free -b | grep -m 1 Mem: | awk '{print $7}')
 AVAIL_MEM=$(formatBytes "$RAM_AVAIL")
 
-if ! disabled "$RAM_CHECK" && [[ "${RAM_SIZE,,}" != "max" && "${RAM_SIZE,,}" != "half" ]]; then
+checkConfiguredMemory() {
+
+  local wanted msg
+
+  if disabled "$RAM_CHECK" || [[ "${RAM_SIZE,,}" == "max" || "${RAM_SIZE,,}" == "half" ]]; then
+    return 0
+  fi
 
   wanted=$(numfmt --from=iec "$RAM_SIZE")
 
@@ -30,9 +36,16 @@ if ! disabled "$RAM_CHECK" && [[ "${RAM_SIZE,,}" != "max" && "${RAM_SIZE,,}" !=
     fi
   fi
 
-fi
+  return 0
+}
 
-if [[ "${RAM_SIZE,,}" == "half" ]]; then
+configureHalfMemory() {
+
+  local wanted
+
+  if [[ "${RAM_SIZE,,}" != "half" ]]; then
+    return 0
+  fi
 
   if (( (RAM_AVAIL / 2) > RAM_SPARE )); then
     wanted=$(( (RAM_AVAIL / 2) / 1048577 ))
@@ -42,9 +55,16 @@ if [[ "${RAM_SIZE,,}" == "half" ]]; then
     RAM_SIZE="max"
   fi
 
-fi
+  return 0
+}
 
-if [[ "${RAM_SIZE,,}" == "max" ]]; then
+configureMaxMemory() {
+
+  local wanted
+
+  if [[ "${RAM_SIZE,,}" != "max" ]]; then
+    return 0
+  fi
 
   if (( RAM_AVAIL < (RAM_SPARE * 2) )); then
 
@@ -65,14 +85,27 @@ if [[ "${RAM_SIZE,,}" == "max" ]]; then
 
   info "Allocated $wanted MB of RAM for the virtual machine."
 
-fi
+  return 0
+}
 
-wanted=$(numfmt --from=iec "$RAM_SIZE")
+checkMinimumMemory() {
 
-if [ "$wanted" -lt "$RAM_MINIMUM" ]; then
+  local wanted
-  wanted=$(( wanted / 1048577 ))
+
-  error "Not enough memory available, there is only $wanted MB left!"
+  wanted=$(numfmt --from=iec "$RAM_SIZE")
-  exit 16
+
-fi
+  if [ "$wanted" -lt "$RAM_MINIMUM" ]; then
+    wanted=$(( wanted / 1048577 ))
+    error "Not enough memory available, there is only $wanted MB left!"
+    exit 16
+  fi
+
+  return 0
+}
+
+checkConfiguredMemory
+configureHalfMemory
+configureMaxMemory
+checkMinimumMemory
 
 return 0

src/power.sh

@@ -15,6 +15,7 @@ API_HOST="127.0.0.1:$COM_PORT"
 QEMU_END="$QEMU_DIR/qemu.end"
 
 _trap() {
+
   local func="$1"; shift
   local sig
   TRAP_PID=$BASHPID
@@ -22,88 +23,103 @@ _trap() {
   for sig; do
     trap "$func $sig" "$sig"
   done
+
+  return 0
 }
 
-app() {
+signalCode() {
-  echo "$APP" && return 0
+
+  local sig="$1"
+
+  case "$sig" in
+    SIGHUP)  echo 129 ;;
+    SIGINT)  echo 130 ;;
+    SIGQUIT) echo 131 ;;
+    SIGABRT) echo 134 ;;
+    SIGTERM) echo 143 ;;
+    *)       echo 0 ;;
+  esac
+
+  return 0
 }
 
-finish() {
+displayReason() {
 
-  local i=0
+  local reason="$1"
+
+  case "$reason" in
+    129 ) echo "SIGHUP" ;;
+    130 ) echo "SIGINT" ;;
+    131 ) echo "SIGQUIT" ;;
+    134 ) echo "SIGABRT" ;;
+    143 ) echo "SIGTERM" ;;
+    * )   echo "$reason" ;;
+  esac
+
+  return 0
+}
+
+readQemuPid() {
+
+  local -n _pid="$1"
+
+  if [ ! -s "$QEMU_PID" ] || ! read -r _pid <"$QEMU_PID"; then
+    return 1
+  fi
+
+  return 0
+}
+
+forceKillQemu() {
+
+  local reason="$1"
   local pid=""
-  local reason=$1
+  local display
+
+  ! readQemuPid pid && return 0
+  ! isAlive "$pid" && return 0
+
+  display=$(displayReason "$reason")
+  error "Forcefully terminating $(app), reason: $display..."
+  { disown "$pid" || :; kill -9 -- "$pid" || :; } 2>/dev/null
+
+  return 0
+}
+
+cleanupHelpers() {
+
   local pids=( "${HOST_PID:-}" "${WSD_PID:-}" \
                "${WEB_PID:-}" "${PASST_PID:-}" "${DNSMASQ_PID:-}" )
 
-  touch "$QEMU_END"
-
-  if [ -s "$QEMU_PID" ]; then
-    if read -r pid <"$QEMU_PID"; then
-      if [ -n "$pid" ] && isAlive "$pid"; then
-        local display="$reason"
-        case "$reason" in
-          129 ) display="SIGHUP" ;;
-          130 ) display="SIGINT" ;;
-          131 ) display="SIGQUIT" ;;
-          134 ) display="SIGABRT" ;;
-          143 ) display="SIGTERM" ;;
-        esac
-        error "Forcefully terminating $(app), reason: $display..."
-        { disown "$pid" || :; kill -9 -- "$pid" || :; } 2>/dev/null
-      fi
-    fi
-  fi
-
   mKill "${pids[@]}"
   fKill "print.sh"
 
   closeNetwork
+  return 0
+}
+
+finish() {
+
+  local reason=$1
+  touch "$QEMU_END"
+
+  forceKillQemu "$reason"
+  cleanupHelpers
 
   if ! waitPidFile "$QEMU_PID" 10; then
     warn "Timed out while waiting for $(app) to exit!"
   fi
 
   (( reason != 1 )) && echo && echo "❯ Shutdown completed!"
+
   exit "$reason"
 }
 
-graceful_shutdown() {
+sendGuestShutdown() {
 
-  local sig="$1"
+  local pid="$1"
-  local pid=""
+  local response
-  local code=0
+  local url
-  local start url response elapsed
-
-  [[ $BASHPID != "$TRAP_PID" ]] && return
-
-  case "$sig" in
-    SIGHUP)  code=129 ;;
-    SIGINT)  code=130 ;;
-    SIGQUIT) code=131 ;;
-    SIGABRT) code=134 ;;
-    SIGTERM) code=143 ;;
-  esac
-
-  if [ -f "$QEMU_END" ]; then
-    echo && info "Received $1 signal while already shutting down..."
-    return
-  fi
-
-  set +e
-  start=$SECONDS
-  touch "$QEMU_END"
-  echo && info "Received $1 signal, sending shutdown command..."
-
-  if [ ! -s "$QEMU_PID" ] || ! read -r pid <"$QEMU_PID"; then
-    warn "QEMU PID file ($QEMU_PID) does not exist?"
-    finish "$code"
-  fi
-
-  if [ -z "$pid" ] || ! isAlive "$pid"; then
-    warn "QEMU process with PID $pid does not exist?"
-    finish "$code"
-  fi
 
   # Don't send the powerdown signal because vDSM ignores ACPI signals
   # nc -q 1 -w 1 -U "$QEMU_DIR/monitor.sock" &> /dev/null <<<'system_powerdown' || :
@@ -121,16 +137,22 @@ graceful_shutdown() {
 
     response="${response#*message\"\: \"}"
     [ -z "$response" ] && response="second signal"
+
     echo && error "Forcefully terminating because of: ${response%%\"*}"
     kill -15 -- "$pid" 2>/dev/null || :
 
   fi
 
-  local name
+  return 0
-  name="$(app)"
+}
+
+normalizeTimeout() {
 
   local term_grace=3      # seconds before loop ends to send SIGTERM
   local cleanup_grace=3   # seconds reserved after the loop for cleanup
+  local elapsed
+  local timeout_left
+  local min
 
   TIMEOUT=$(strip "$TIMEOUT")
   if [[ ! "$TIMEOUT" =~ ^[0-9]+$ ]]; then
@@ -145,8 +167,6 @@ graceful_shutdown() {
     cleanup_grace=4
   fi
 
-  local cnt=0 sigterm_at=0 min wait_until elapsed timeout_left
-
   elapsed=$((SECONDS - start))
   timeout_left=$((TIMEOUT - elapsed))
 
@@ -156,10 +176,20 @@ graceful_shutdown() {
   wait_until=$((timeout_left - cleanup_grace))
   sigterm_at=$((wait_until - term_grace))
 
+  return 0
+}
+
+waitForShutdown() {
+
+  local cnt=0
+  local pid="$1"
+  local name="$APP"
+  local slp
+
   while (( cnt <= wait_until )); do
 
     sleep 1 &
-    local slp=$!
+    slp=$!
 
     # Stop waiting if the process has exited
     ! isAlive "$pid" && break
@@ -179,6 +209,43 @@ graceful_shutdown() {
 
   done
 
+  return 0
+}
+
+graceful_shutdown() {
+
+  local sig="$1"
+  local pid=""
+  local code=0
+
+  [[ $BASHPID != "$TRAP_PID" ]] && return
+
+  code=$(signalCode "$sig")
+
+  if [ -f "$QEMU_END" ]; then
+    echo && info "Received $1 signal while already shutting down..."
+    return
+  fi
+
+  set +e
+  start=$SECONDS
+  touch "$QEMU_END"
+  echo && info "Received $1 signal, sending shutdown command..."
+
+  if ! readQemuPid pid; then
+    warn "QEMU PID file ($QEMU_PID) does not exist?"
+    finish "$code"
+  fi
+
+  if ! isAlive "$pid"; then
+    warn "QEMU process with PID $pid does not exist?"
+    finish "$code"
+  fi
+
+  sendGuestShutdown "$pid"
+  normalizeTimeout
+  waitForShutdown "$pid"
+
   finish "$code"
 }
 

src/print.sh

@@ -1,16 +1,20 @@
 #!/usr/bin/env bash
+# shellcheck disable=SC2329
 set -Eeuo pipefail
 
 : "${DHCP:="N"}"
 : "${NETWORK:="Y"}"
 
-[[ "$NETWORK" == [Nn]* ]] && exit 0
+cd /run
+. utils.sh      # Load functions
 
 info () { printf "%b%s%b" "\E[1;34m❯ \E[1;36m" "$1" "\E[0m\n" >&2; }
 error () { printf "%b%s%b" "\E[1;31m❯ " "ERROR: $1" "\E[0m\n" >&2; }
 
+disabled "$NETWORK" && exit 0
+
 file="/run/shm/dsm.url"
-info="/run/shm/msg.html"
+msgs="/run/shm/msg.html"
 driver="/run/shm/qemu.nic"
 page="/run/shm/index.html"
 address="/run/shm/qemu.ip"
@@ -22,68 +26,144 @@ resp_err="Guest returned an invalid response:"
 curl_err="Failed to connect to guest: curl error"
 jq_err="Failed to parse response from guest: jq error"
 
-while [ ! -s  "$file" ]
+exitIfShuttingDown() {
-do
-
-  # Check if not shutting down
-  [ -f "$shutdown" ] && exit 1
-
-  sleep 3
 
   [ -f "$shutdown" ] && exit 1
-  [ -s "$file" ] && break
 
-  # Retrieve network info from guest VM
+  return 0
+}
+
+queryGuest() {
+
+  local rc
+
   { json=$(curl -m 20 -sk "$url"); rc=$?; } || :
 
-  [ -f "$shutdown" ] && exit 1
+  exitIfShuttingDown
-  (( rc != 0 )) && error "$curl_err $rc" && continue
 
-  { result=$(echo "$json" | jq -r '.status'); rc=$?; } || :
+  if (( rc != 0 )); then
-  (( rc != 0 )) && error "$jq_err $rc ( $json )" && continue
+    error "$curl_err $rc"
-  [[ "$result" == "null" ]] && error "$resp_err $json" && continue
+    return 1
-
-  if [[ "$result" != "success" ]] ; then
-    { msg=$(echo "$json" | jq -r '.message'); rc=$?; } || :
-    error "Guest replied $result: $msg" && continue
   fi
 
-  { port=$(echo "$json" | jq -r '.data.data.dsm_setting.data.http_port'); rc=$?; } || :
+  return 0
-  (( rc != 0 )) && error "$jq_err $rc ( $json )" && continue
+}
-  [[ "$port" == "null" ]] && error "$resp_err $json" && continue
-  [ -z "$port" ] && continue
 
-  { ip=$(echo "$json" | jq -r '.data.data.ip.data[] | select((.name=="eth0") and has("ip")).ip'); rc=$?; } || :
+readJsonField() {
-  (( rc != 0 )) && error "$jq_err $rc ( $json )" && continue
-  [[ "$ip" == "null" ]] && error "$resp_err $json" && continue
 
-  [ -z "$ip" ] && continue
+  local query="$1"
-  echo "$ip:$port" > $file
+  local result
+  local rc
 
-done
+  { result=$(jq -r "$query" <<< "$json"); rc=$?; } || :
 
-[ -f "$shutdown" ] && exit 1
+  if (( rc != 0 )); then
+    error "$jq_err $rc ( $json )"
+    return 1
+  fi
 
-location=$(<"$file")
+  if [[ "$result" == "null" ]]; then
+    error "$resp_err $json"
+    return 1
+  fi
 
-if [[ "$DHCP" == [Yy1]* ]]; then
+  printf '%s\n' "$result"
+  return 0
+}
+
+readGuestStatus() {
+
+  local result msg rc
+
+  result=$(readJsonField '.status') || return 1
+
+  if [[ "$result" != "success" ]]; then
+    { msg=$(jq -r '.message // empty' <<< "$json"); rc=$?; } || :
+
+    if (( rc != 0 )); then
+      error "$jq_err $rc ( $json )"
+      return 1
+    fi
+
+    error "Guest replied $result: $msg"
+    return 1
+  fi
+
+  return 0
+}
+
+readGuestPort() {
+
+  port=$(readJsonField '.data.data.dsm_setting.data.http_port') || return 1
+  [ -z "$port" ] && return 1
+
+  return 0
+}
+
+readGuestIp() {
+
+  ip=$(readJsonField '.data.data.ip.data[] | select(.name=="eth0" and has("ip")) | .ip | select(test("^[0-9]+\\."))') || return 1
+  [ -z "$ip" ] && return 1
+
+  return 0
+}
+
+writeDsmLocation() {
+
+  echo "$ip:$port" > "$file"
+
+  return 0
+}
+
+pollGuestLocation() {
+
+  while [ ! -s "$file" ]; do
+
+    # Check if not shutting down
+    exitIfShuttingDown
+
+    sleep 3
+
+    exitIfShuttingDown
+    [ -s "$file" ] && break
+
+    # Retrieve network info from guest VM
+    queryGuest || continue
+    readGuestStatus || continue
+    readGuestPort || continue
+    readGuestIp || continue
+    writeDsmLocation
+
+  done
+
+  return 0
+}
+
+writeDhcpPage() {
+
+  local title body script html
 
   msg="http://$location"
   title="<title>Virtual DSM</title>"
   body="The location of DSM is <a href='http://$location'>http://$location</a>"
   script="<script>setTimeout(function(){ window.location.assign('http://$location'); }, 3000);</script>"
 
-  HTML=$(<"$template")
+  html=$(<"$template")
-  HTML="${HTML/\[1\]/$title}"
+  html="${html/\[1\]/$title}"
-  HTML="${HTML/\[2\]/$script}"
+  html="${html/\[2\]/$script}"
-  HTML="${HTML/\[3\]/$body}"
+  html="${html/\[3\]/$body}"
-  HTML="${HTML/\[4\]/}"
+  html="${html/\[4\]/}"
-  HTML="${HTML/\[5\]/}"
+  html="${html/\[5\]/}"
 
-  echo "$HTML" > "$page"
+  echo "$html" > "$page"
-  echo "$body" > "$info"
+  echo "$body" > "$msgs"
 
-else
+  return 0
+}
+
+buildStaticMessage() {
+
+  local nic ip port
 
   nic=$(<"$driver")
   ip=$(<"$address")
@@ -95,12 +175,31 @@ else
     msg="http://$ip:$port"
   fi
 
+  return 0
+}
+
+printLoginMessage() {
+
+  echo "" >&2
+  info "-----------------------------------------------------------"
+  info " You can now login to DSM at $msg"
+  info "-----------------------------------------------------------"
+  echo "" >&2
+
+  return 0
+}
+
+pollGuestLocation
+exitIfShuttingDown
+
+location=$(<"$file")
+
+if enabled "$DHCP"; then
+  writeDhcpPage
+else
+  buildStaticMessage
 fi
 
-echo "" >&2
+printLoginMessage
-info "-----------------------------------------------------------"
-info " You can now login to DSM at $msg"
-info "-----------------------------------------------------------"
-echo "" >&2
 
 exit 0

src/proc.sh

@@ -11,15 +11,27 @@ HOST_CPU=$(strip "$HOST_CPU")
 CPU_FLAGS=$(strip "$CPU_FLAGS")
 CPU_MODEL=$(strip "$CPU_MODEL")
 
-CLOCKSOURCE="tsc"
+selectClocksource() {
-[[ "${ARCH,,}" == "arm64" ]] && CLOCKSOURCE="arch_sys_counter"
+
-CLOCK="/sys/devices/system/clocksource/clocksource0/current_clocksource"
+  CLOCKSOURCE="tsc"
+  [[ "${ARCH,,}" == "arm64" ]] && CLOCKSOURCE="arch_sys_counter"
+  CLOCK="/sys/devices/system/clocksource/clocksource0/current_clocksource"
+
+  return 0
+}
+
+checkClocksource() {
+
+  local result
+
+  if [ ! -f "$CLOCK" ]; then
+    warn "file \"$CLOCK\" cannot be found?"
+    return 0
+  fi
 
-if [ ! -f "$CLOCK" ]; then
-  warn "file \"$CLOCK\" cannot be found?"
-else
   result=$(<"$CLOCK")
   result="${result//[![:print:]]/}"
+
   case "${result,,}" in
     "${CLOCKSOURCE,,}" ) ;;
     "kvm-clock" ) info "Nested KVM virtualization detected.." ;;
@@ -27,29 +39,38 @@ else
     "hpet" ) warn "unsupported clock source detected: '$result'. Please set host clock source to '$CLOCKSOURCE'." ;;
     *) warn "unexpected clock source detected: '$result'. Please set host clock source to '$CLOCKSOURCE'." ;;
   esac
-fi
 
-flags=$(sed -ne '/^flags/s/^.*: //p' /proc/cpuinfo)
+  return 0
+}
 
-if ! disabled "$KVM"; then
+checkSse42() {
-
-  CPU_FEATURES="kvm=on,l3-cache=on,+hypervisor"
-  KVM_OPTS=",accel=kvm -enable-kvm -global kvm-pit.lost_tick_policy=discard"
 
   if ! grep -qw "sse4_2" <<< "$flags"; then
     error "Your CPU does not have the SSE4 instruction set that Virtual DSM requires!"
     ! enabled "$DEBUG" && exit 88
   fi
 
+  return 0
+}
+
+configureKvmCpuModel() {
+
+  CPU_FEATURES="kvm=on,l3-cache=on,+hypervisor"
+  KVM_OPTS=",accel=kvm -enable-kvm -global kvm-pit.lost_tick_policy=discard"
+
   if [ -z "$CPU_MODEL" ]; then
     CPU_MODEL="host"
     CPU_FEATURES+=",migratable=no"
   fi
 
+  return 0
+}
+
+appendKvmInvtscFeature() {
+
   if grep -qw "svm" <<< "$flags"; then
 
     # AMD processor
-
     if grep -qw "tsc_scale" <<< "$flags"; then
       CPU_FEATURES+=",+invtsc"
     fi
@@ -57,7 +78,7 @@ if ! disabled "$KVM"; then
   else
 
     # Intel processor
-
+    local vmx
     vmx=$(sed -ne '/^vmx flags/s/^.*: //p' /proc/cpuinfo)
 
     if grep -qw "tsc_scaling" <<< "$vmx"; then
@@ -66,7 +87,35 @@ if ! disabled "$KVM"; then
 
   fi
 
-else
+  return 0
+}
+
+configureKvm() {
+
+  configureKvmCpuModel
+  checkSse42
+  appendKvmInvtscFeature
+
+  return 0
+}
+
+configureTcgCpuModel() {
+
+  if [ -n "$CPU_MODEL" ]; then
+    return 0
+  fi
+
+  if [[ "$ARCH" == "amd64" ]]; then
+    CPU_MODEL="max"
+    CPU_FEATURES+=",migratable=no"
+  else
+    CPU_MODEL="qemu64"
+  fi
+
+  return 0
+}
+
+configureTcg() {
 
   KVM_OPTS=""
   CPU_FEATURES="l3-cache=on,+hypervisor"
@@ -75,70 +124,95 @@ else
     KVM_OPTS=" -accel tcg,thread=multi"
   fi
 
-  if [ -z "$CPU_MODEL" ]; then
+  configureTcgCpuModel
-    if [[ "$ARCH" == "amd64" ]]; then
+  CPU_FEATURES+=",+ssse3,+sse4.1,+sse4.2"
-      CPU_MODEL="max"
+
-      CPU_FEATURES+=",migratable=no"
+  return 0
+}
+
+extractHostCpuArgument() {
+
+  local args prefix suffix param
+
+  if [[ "$ARGUMENTS" == *"-cpu host,"* ]]; then
+
+    args="${ARGUMENTS} "
+    prefix="${args/-cpu host,*/}"
+    suffix="${args/*-cpu host,/}"
+    param="${suffix%% *}"
+    suffix="${suffix#* }"
+    args="${prefix}${suffix}"
+    ARGUMENTS="${args::-1}"
+
+    if [ -z "$CPU_FLAGS" ]; then
+      CPU_FLAGS="$param"
     else
-      CPU_MODEL="qemu64"
+      CPU_FLAGS+=",$param"
+    fi
+
+  else
+
+    if [[ "$ARGUMENTS" == *"-cpu host"* ]]; then
+      ARGUMENTS="${ARGUMENTS//-cpu host/}"
+    fi
+
+  fi
+
+  return 0
+}
+
+composeCpuFlags() {
+
+  if [ -z "$CPU_FLAGS" ]; then
+    if [ -z "$CPU_FEATURES" ]; then
+      CPU_FLAGS="$CPU_MODEL"
+    else
+      CPU_FLAGS="$CPU_MODEL,$CPU_FEATURES"
+    fi
+  else
+    if [ -z "$CPU_FEATURES" ]; then
+      CPU_FLAGS="$CPU_MODEL,$CPU_FLAGS"
+    else
+      CPU_FLAGS="$CPU_MODEL,$CPU_FEATURES,$CPU_FLAGS"
     fi
   fi
 
-  CPU_FEATURES+=",+ssse3,+sse4.1,+sse4.2"
+  return 0
+}
 
-fi
+configureHostCpuName() {
 
-if [[ "$ARGUMENTS" == *"-cpu host,"* ]]; then
+  if [ -z "$HOST_CPU" ]; then
-
+    [[ "${CPU,,}" != "unknown" ]] && HOST_CPU="$CPU"
-  args="${ARGUMENTS} "
-  prefix="${args/-cpu host,*/}"
-  suffix="${args/*-cpu host,/}"
-  param="${suffix%% *}"
-  suffix="${suffix#* }"
-  args="${prefix}${suffix}"
-  ARGUMENTS="${args::-1}"
-
-  if [ -z "$CPU_FLAGS" ]; then
-    CPU_FLAGS="$param"
-  else
-    CPU_FLAGS+=",$param"
   fi
 
+  if [ -n "$HOST_CPU" ]; then
+    HOST_CPU="${HOST_CPU%%,*},,"
+  else
+    HOST_CPU="QEMU, Virtual CPU,"
+    if [ "$ARCH" == "amd64" ]; then
+      HOST_CPU+=" X86_64"
+    else
+      HOST_CPU+=" $ARCH"
+    fi
+  fi
+
+  return 0
+}
+
+selectClocksource
+checkClocksource
+
+flags=$(sed -ne '/^flags/s/^.*: //p' /proc/cpuinfo)
+
+if ! disabled "$KVM"; then
+  configureKvm
 else
-
+  configureTcg
-  if [[ "$ARGUMENTS" == *"-cpu host"* ]]; then
-    ARGUMENTS="${ARGUMENTS//-cpu host/}"
-  fi
-
 fi
 
-if [ -z "$CPU_FLAGS" ]; then
+extractHostCpuArgument
-  if [ -z "$CPU_FEATURES" ]; then
+composeCpuFlags
-    CPU_FLAGS="$CPU_MODEL"
+configureHostCpuName
-  else
-    CPU_FLAGS="$CPU_MODEL,$CPU_FEATURES"
-  fi
-else
-  if [ -z "$CPU_FEATURES" ]; then
-    CPU_FLAGS="$CPU_MODEL,$CPU_FLAGS"
-  else
-    CPU_FLAGS="$CPU_MODEL,$CPU_FEATURES,$CPU_FLAGS"
-  fi
-fi
-
-if [ -z "$HOST_CPU" ]; then
-  [[ "${CPU,,}" != "unknown" ]] && HOST_CPU="$CPU"
-fi
-
-if [ -n "$HOST_CPU" ]; then
-  HOST_CPU="${HOST_CPU%%,*},,"
-else
-  HOST_CPU="QEMU, Virtual CPU,"
-  if [ "$ARCH" == "amd64" ]; then
-    HOST_CPU+=" X86_64"
-  else
-    HOST_CPU+=" $ARCH"
-  fi
-fi
 
 return 0

src/reset.sh

@@ -21,6 +21,203 @@ enabled "${TRACE:-}" && set -o functrace && trap 'echo "# $BASH_COMMAND" >&2' DE
 : "${DISK_SIZE:="16G"}"    # Initial data disk size
 : "${STORAGE:="/storage"}" # Storage folder location
 
+detectEngine() {
+
+  if [ -f "/run/.containerenv" ]; then
+    ENGINE="${container:-}"
+    if [[ "${ENGINE,,}" == *"podman"* ]]; then
+      ROOTLESS="Y"
+      ENGINE="Podman"
+    else
+      [ -z "$ENGINE" ] && ENGINE="Kubernetes"
+    fi
+  fi
+
+  return 0
+}
+
+checkPrivileged() {
+
+  local cap_bnd
+  local last_cap
+  local max_cap
+
+  # Get the capability bounding set
+  cap_bnd=$(grep '^CapBnd:' /proc/$$/status | awk '{print $2}')
+  cap_bnd=$(printf "%d" "0x${cap_bnd}")
+
+  # Get the last capability number
+  last_cap=$(cat /proc/sys/kernel/cap_last_cap)
+
+  # Calculate the maximum capability value
+  max_cap=$(((1 << (last_cap + 1)) - 1))
+
+  if [ "$cap_bnd" -eq "$max_cap" ]; then
+    ROOTLESS="N"
+    PRIVILEGED="Y"
+  fi
+
+  return 0
+}
+
+normalizeCpuCores() {
+
+  CPU_CORES=$(strip "$CPU_CORES")
+  [ -z "$CPU_CORES" ] && CPU_CORES=2
+  [[ "${CPU_CORES,,}" == "max" ]] && CPU_CORES="$CORES"
+  [[ "${CPU_CORES,,}" == "half" ]] && CPU_CORES=$(( CORES / 2 ))
+  [ -z "${CPU_CORES##*[!0-9]*}" ] && error "Invalid amount of CPU_CORES: $CPU_CORES" && exit 15
+
+  [ "$CPU_CORES" -lt "1" ] && CPU_CORES=1
+  if [ "$CPU_CORES" -gt "$CORES" ]; then
+    warn "The amount for CPU_CORES (${CPU_CORES}) exceeds the amount of logical cores available (${CORES}) and will be limited."
+    CPU_CORES="$CORES"
+  fi
+
+  return 0
+}
+
+checkStorage() {
+
+  # Check system
+
+  QEMU_DIR="/run/shm"
+
+  if [ ! -d "/dev/shm" ]; then
+    error "Directory /dev/shm not found!" && exit 14
+  else
+    [ ! -d "$QEMU_DIR" ] && ln -s /dev/shm "$QEMU_DIR"
+  fi
+
+  QEMU_PID="$QEMU_DIR/qemu.pid"
+
+  # Check folder
+
+  if [[ "${STORAGE,,}" != "/storage" ]]; then
+    mkdir -p "$STORAGE"
+  fi
+
+  if [ ! -d "$STORAGE" ]; then
+    error "Storage folder ($STORAGE) not found!" && exit 13
+  fi
+
+  if [ ! -w "$STORAGE" ]; then
+    msg="Storage folder ($STORAGE) is not writeable!"
+    msg+=" If SELinux is active, you need to add the \":Z\" flag to the bind mount."
+    error "$msg" && exit 13
+  fi
+
+  return 0
+}
+
+checkFilesystem() {
+
+  # Check filesystem
+  FS=$(stat -f -c %T "$STORAGE")
+
+  if [[ "${FS,,}" == "ecryptfs" || "${FS,,}" == "tmpfs" ]]; then
+    DISK_IO="threads"
+    DISK_CACHE="writeback"
+  fi
+
+  return 0
+}
+
+normalizeRamSize() {
+
+  # Read memory
+  RAM_AVAIL=$(free -b | grep -m 1 Mem: | awk '{print $7}')
+  RAM_TOTAL=$(free -b | grep -m 1 Mem: | awk '{print $2}')
+
+  RAM_SPARE=500000000
+  RAM_MINIMUM=136314880
+
+  RAM_SIZE=$(strip "$RAM_SIZE")
+  RAM_SIZE="${RAM_SIZE// /}"
+  [ -z "$RAM_SIZE" ] && RAM_SIZE="2G"
+
+  if [[ "${RAM_SIZE,,}" != "max" && "${RAM_SIZE,,}" != "half" ]]; then
+
+    if [ -z "${RAM_SIZE//[0-9. ]}" ]; then
+      [ "${RAM_SIZE%%.*}" -lt "130" ] && RAM_SIZE="${RAM_SIZE}G" || RAM_SIZE="${RAM_SIZE}M"
+    fi
+
+    RAM_SIZE=$(echo "${RAM_SIZE^^}" | sed 's/MB/M/g;s/GB/G/g;s/TB/T/g')
+    ! numfmt --from=iec "$RAM_SIZE" &>/dev/null && error "Invalid RAM_SIZE: $RAM_SIZE" && exit 16
+    wanted=$(numfmt --from=iec "$RAM_SIZE")
+    [ "$wanted" -lt "$RAM_MINIMUM" ] && error "RAM_SIZE is too low: $RAM_SIZE" && exit 16
+
+  fi
+
+  return 0
+}
+
+checkKvm() {
+
+  # Check KVM support
+
+  if [[ "${PLATFORM,,}" == "x64" ]]; then
+    TARGET="amd64"
+  else
+    TARGET="arm64"
+  fi
+
+  if disabled "$KVM"; then
+    warn "KVM acceleration is disabled, this will cause the machine to run about 10 times slower!"
+  else
+    if [[ "${ARCH,,}" != "$TARGET" ]]; then
+      KVM="N"
+      warn "your CPU architecture is ${ARCH^^} and cannot provide KVM acceleration for ${PLATFORM^^} instructions, so the machine will run about 10 times slower."
+    fi
+  fi
+
+  if ! disabled "$KVM"; then
+
+    KVM_ERR=""
+
+    if [ ! -e /dev/kvm ]; then
+      KVM_ERR="(/dev/kvm is missing)"
+    else
+      if ! sh -c 'echo -n > /dev/kvm' &> /dev/null; then
+        KVM_ERR="(/dev/kvm is unwriteable)"
+      else
+        if [[ "${PLATFORM,,}" == "x64" ]]; then
+          flags=$(sed -ne '/^flags/s/^.*: //p' /proc/cpuinfo)
+          if ! grep -qw "vmx\|svm" <<< "$flags"; then
+            KVM_ERR="(not enabled in BIOS)"
+          fi
+          if ! grep -qw "sse4_2" <<< "$flags"; then
+            error "Your CPU does not have the SSE4 instruction set that Virtual DSM requires!"
+            ! enabled "$DEBUG" && exit 88
+          fi
+        fi
+      fi
+    fi
+
+    if [ -n "$KVM_ERR" ]; then
+      KVM="N"
+      if [[ "$OSTYPE" =~ ^darwin ]]; then
+        warn "you are using macOS which has no KVM support, so the machine will run about 10 times slower."
+      else
+        kernel=$(uname -a)
+        case "${kernel,,}" in
+          *"microsoft"* )
+            error "Please bind '/dev/kvm' as a volume in the optional container settings when using Docker Desktop." ;;
+          *"synology"* )
+            error "Please make sure that Synology VMM (Virtual Machine Manager) is installed and that '/dev/kvm' is binded to this container." ;;
+          *)
+            error "KVM acceleration is not available $KVM_ERR, this will cause the machine to run about 10 times slower."
+            error "See the FAQ for possible causes, or disable acceleration by adding the \"KVM=N\" variable (not recommended)." ;;
+        esac
+        ! enabled "$DEBUG" && exit 88
+      fi
+    fi
+
+  fi
+
+  return 0
+}
+
 # Sanitize variables
 TZ=$(strip "$TZ")
 STORAGE=$(strip "$STORAGE")
@@ -34,33 +231,12 @@ ENGINE="Docker"
 PROCESS="${APP,,}"
 PROCESS="${PROCESS// /-}"
 
-if [ -f "/run/.containerenv" ]; then
+detectEngine
-  ENGINE="${container:-}"
-  if [[ "${ENGINE,,}" == *"podman"* ]]; then
-    ROOTLESS="Y"
-    ENGINE="Podman"
-  else
-    [ -z "$ENGINE" ] && ENGINE="Kubernetes"
-  fi
-fi
 
 echo "❯ Starting $APP for $ENGINE v$(</etc/version)..."
 echo "❯ For support visit $SUPPORT"
 
-# Get the capability bounding set
+checkPrivileged
-CAP_BND=$(grep '^CapBnd:' /proc/$$/status | awk '{print $2}')
-CAP_BND=$(printf "%d" "0x${CAP_BND}")
-
-# Get the last capability number
-LAST_CAP=$(cat /proc/sys/kernel/cap_last_cap)
-
-# Calculate the maximum capability value
-MAX_CAP=$(((1 << (LAST_CAP + 1)) - 1))
-
-if [ "${CAP_BND}" -eq "${MAX_CAP}" ]; then
-  ROOTLESS="N"
-  PRIVILEGED="Y"
-fi
 
 INFO="/run/shm/msg.html"
 PAGE="/run/shm/index.html"
@@ -71,7 +247,6 @@ FOOTER2="<a href='$SUPPORT'>$SUPPORT</a>"
 SOCKETS=1
 CPU=$(cpu)
 SYS=$(uname -r)
-HOST=$(hostname -s)
 KERNEL=$(echo "$SYS" | cut -b 1)
 MINOR=$(echo "$SYS" | cut -d '.' -f2)
 ARCH=$(dpkg --print-architecture)
@@ -83,77 +258,10 @@ if grep -qi "socket(s)" <<< "$(lscpu)"; then
   [ "$SOCKETS" -lt "1" ] && SOCKETS=1
 fi
 
-CPU_CORES=$(strip "$CPU_CORES")
+normalizeCpuCores
-[ -z "$CPU_CORES" ] && CPU_CORES=2
+checkStorage
-[[ "${CPU_CORES,,}" == "max" ]] && CPU_CORES="$CORES"
+checkFilesystem
-[[ "${CPU_CORES,,}" == "half" ]] && CPU_CORES=$(( CORES / 2 ))
+normalizeRamSize
-[ -z "${CPU_CORES##*[!0-9]*}" ] && error "Invalid amount of CPU_CORES: $CPU_CORES" && exit 15
-
-[ "$CPU_CORES" -lt "1" ] && CPU_CORES=1
-if [ "$CPU_CORES" -gt "$CORES" ]; then
-  warn "The amount for CPU_CORES (${CPU_CORES}) exceeds the amount of logical cores available (${CORES}) and will be limited."
-  CPU_CORES="$CORES"
-fi
-
-# Check system
-
-QEMU_DIR="/run/shm"
-
-if [ ! -d "/dev/shm" ]; then
-  error "Directory /dev/shm not found!" && exit 14
-else
-  [ ! -d "$QEMU_DIR" ] && ln -s /dev/shm "$QEMU_DIR"
-fi
-
-QEMU_PID="$QEMU_DIR/qemu.pid"
-
-# Check folder
-
-if [[ "${STORAGE,,}" != "/storage" ]]; then
-  mkdir -p "$STORAGE"
-fi
-
-if [ ! -d "$STORAGE" ]; then
-  error "Storage folder ($STORAGE) not found!" && exit 13
-fi
-
-if [ ! -w "$STORAGE" ]; then
-  msg="Storage folder ($STORAGE) is not writeable!"
-  msg+=" If SELinux is active, you need to add the \":Z\" flag to the bind mount."
-  error "$msg" && exit 13
-fi
-
-# Check filesystem
-FS=$(stat -f -c %T "$STORAGE")
-
-if [[ "${FS,,}" == "ecryptfs" || "${FS,,}" == "tmpfs" ]]; then
-  DISK_IO="threads"
-  DISK_CACHE="writeback"
-fi
-
-# Read memory
-RAM_AVAIL=$(free -b | grep -m 1 Mem: | awk '{print $7}')
-RAM_TOTAL=$(free -b | grep -m 1 Mem: | awk '{print $2}')
-
-RAM_SPARE=500000000
-RAM_MINIMUM=136314880
-
-RAM_SIZE=$(strip "$RAM_SIZE")
-RAM_SIZE="${RAM_SIZE// /}"
-[ -z "$RAM_SIZE" ] && RAM_SIZE="2G"
-
-if [[ "${RAM_SIZE,,}" != "max" && "${RAM_SIZE,,}" != "half" ]]; then
-
-  if [ -z "${RAM_SIZE//[0-9. ]}" ]; then
-    [ "${RAM_SIZE%%.*}" -lt "130" ] && RAM_SIZE="${RAM_SIZE}G" || RAM_SIZE="${RAM_SIZE}M"
-  fi
-
-  RAM_SIZE=$(echo "${RAM_SIZE^^}" | sed 's/MB/M/g;s/GB/G/g;s/TB/T/g')
-  ! numfmt --from=iec "$RAM_SIZE" &>/dev/null && error "Invalid RAM_SIZE: $RAM_SIZE" && exit 16
-  wanted=$(numfmt --from=iec "$RAM_SIZE")
-  [ "$wanted" -lt "$RAM_MINIMUM" ] && error "RAM_SIZE is too low: $RAM_SIZE" && exit 16
-
-fi
 
 # Print system info
 SYS="${SYS/-generic/}"
@@ -168,66 +276,7 @@ TOTAL_MEM=$(formatBytes "$RAM_TOTAL" "up")
 echo "❯ CPU: ${CPU} | RAM: ${AVAIL_MEM/ GB/}/$TOTAL_MEM | DISK: $SPACE_GB (${FS}) | KERNEL: ${SYS}..."
 echo
 
-# Check KVM support
+checkKvm
-
-if [[ "${PLATFORM,,}" == "x64" ]]; then
-  TARGET="amd64"
-else
-  TARGET="arm64"
-fi
-
-if disabled "$KVM"; then
-  warn "KVM acceleration is disabled, this will cause the machine to run about 10 times slower!"
-else
-  if [[ "${ARCH,,}" != "$TARGET" ]]; then
-    KVM="N"
-    warn "your CPU architecture is ${ARCH^^} and cannot provide KVM acceleration for ${PLATFORM^^} instructions, so the machine will run about 10 times slower."
-  fi
-fi
-
-if ! disabled "$KVM"; then
-
-  KVM_ERR=""
-
-  if [ ! -e /dev/kvm ]; then
-    KVM_ERR="(/dev/kvm is missing)"
-  else
-    if ! sh -c 'echo -n > /dev/kvm' &> /dev/null; then
-      KVM_ERR="(/dev/kvm is unwriteable)"
-    else
-      if [[ "${PLATFORM,,}" == "x64" ]]; then
-        flags=$(sed -ne '/^flags/s/^.*: //p' /proc/cpuinfo)
-        if ! grep -qw "vmx\|svm" <<< "$flags"; then
-          KVM_ERR="(not enabled in BIOS)"
-        fi
-        if ! grep -qw "sse4_2" <<< "$flags"; then
-          error "Your CPU does not have the SSE4 instruction set that Virtual DSM requires!"
-          ! enabled "$DEBUG" && exit 88
-        fi
-      fi
-    fi
-  fi
-
-  if [ -n "$KVM_ERR" ]; then
-    KVM="N"
-    if [[ "$OSTYPE" =~ ^darwin ]]; then
-      warn "you are using macOS which has no KVM support, so the machine will run about 10 times slower."
-    else
-      kernel=$(uname -a)
-      case "${kernel,,}" in
-        *"microsoft"* )
-          error "Please bind '/dev/kvm' as a volume in the optional container settings when using Docker Desktop." ;;
-        *"synology"* )
-          error "Please make sure that Synology VMM (Virtual Machine Manager) is installed and that '/dev/kvm' is binded to this container." ;;
-        *)
-          error "KVM acceleration is not available $KVM_ERR, this will cause the machine to run about 10 times slower."
-          error "See the FAQ for possible causes, or disable acceleration by adding the \"KVM=N\" variable (not recommended)." ;;
-      esac
-      ! enabled "$DEBUG" && exit 88
-    fi
-  fi
-
-fi
 
 # Cleanup files
 rm -f "$QEMU_DIR"/dsm.url

src/serial.sh

@@ -15,7 +15,12 @@ HOST_MODEL=$(strip "$HOST_MODEL")
 HOST_SERIAL=$(strip "$HOST_SERIAL")
 GUEST_SERIAL=$(strip "$GUEST_SERIAL")
 
-if [ -n "$HOST_MAC" ]; then
+validateHostMac() {
+  local m
+
+  if [ -z "$HOST_MAC" ]; then
+    return 0
+  fi
 
   HOST_MAC="${HOST_MAC//-/:}"
 
@@ -28,51 +33,77 @@ if [ -n "$HOST_MAC" ]; then
     error "Invalid HOST_MAC address: '$HOST_MAC', should be 12 or 17 digits long!" && exit 28
   fi
 
-fi
+  return 0
+}
 
-HOST_PID="$QEMU_DIR/host.pid"
+buildHostArguments() {
 
-HOST_ARGS=()
+  HOST_ARGS=()
-HOST_ARGS+=("-cpu=$CPU_CORES")
+  HOST_ARGS+=("-cpu=$CPU_CORES")
-HOST_ARGS+=("-cpu_arch=$HOST_CPU")
+  HOST_ARGS+=("-cpu_arch=$HOST_CPU")
 
-[ -n "$HOST_MAC" ] && HOST_ARGS+=("-mac=$HOST_MAC")
+  [ -n "$HOST_MAC" ] && HOST_ARGS+=("-mac=$HOST_MAC")
-[ -n "$HOST_MODEL" ] && HOST_ARGS+=("-model=$HOST_MODEL")
+  [ -n "$HOST_MODEL" ] && HOST_ARGS+=("-model=$HOST_MODEL")
-[ -n "$HOST_SERIAL" ] && HOST_ARGS+=("-hostsn=$HOST_SERIAL")
+  [ -n "$HOST_SERIAL" ] && HOST_ARGS+=("-hostsn=$HOST_SERIAL")
-[ -n "$GUEST_SERIAL" ] && HOST_ARGS+=("-guestsn=$GUEST_SERIAL")
+  [ -n "$GUEST_SERIAL" ] && HOST_ARGS+=("-guestsn=$GUEST_SERIAL")
 
-if enabled "$HOST_DEBUG"; then
+  return 0
-  set -x
+}
-  ./host.bin "${HOST_ARGS[@]}" &
-  { set +x; } 2>/dev/null
-  echo "$!" > "$HOST_PID"
-  echo
-else
-  ./host.bin "${HOST_ARGS[@]}" >/dev/null &
-  echo "$!" > "$HOST_PID"
-fi
 
-cnt=0
+startHostBinary() {
-sleep 0.2
 
-while ! nc -z -w2 127.0.0.1 "$COM_PORT" > /dev/null 2>&1; do
+  if enabled "$HOST_DEBUG"; then
-  sleep 0.1
+    set -x
-  cnt=$((cnt + 1))
+    ./host.bin "${HOST_ARGS[@]}" &
-  (( cnt > 50 )) && error "Failed to connect to qemu-host.." && exit 58
+    { set +x; } 2>/dev/null
-done
+    echo "$!" > "$HOST_PID"
+    echo
+  else
+    ./host.bin "${HOST_ARGS[@]}" >/dev/null &
+    echo "$!" > "$HOST_PID"
+  fi
 
-cnt=0
+  return 0
+}
 
-while ! nc -z -w2 127.0.0.1 "$CHR_PORT" > /dev/null 2>&1; do
+waitForPort() {
-  sleep 0.1
-  cnt=$((cnt + 1))
-  (( cnt > 50 )) && error "Failed to connect to qemu-host.." && exit 59
-done
 
-# Configure serial ports
+  local port="$1"
-SERIAL_OPTS="-serial mon:stdio \
+  local exit_code="$2"
+  local cnt=0
+
+  while ! nc -z -w2 127.0.0.1 "$port" > /dev/null 2>&1; do
+    sleep 0.1
+    cnt=$((cnt + 1))
+    (( cnt > 50 )) && error "Failed to connect to qemu-host.." && exit "$exit_code"
+  done
+
+  return 0
+}
+
+configureSerialPorts() {
+
+  # Configure serial ports
+  SERIAL_OPTS="-serial mon:stdio \
         -device virtio-serial-pci,id=virtio-serial0,bus=pcie.0,addr=0x3 \
         -chardev socket,id=charchannel0,host=127.0.0.1,port=$CHR_PORT,reconnect=10 \
         -device virtserialport,bus=virtio-serial0.0,nr=1,chardev=charchannel0,id=channel0,name=vchannel"
 
+  return 0
+}
+
+validateHostMac
+
+HOST_PID="$QEMU_DIR/host.pid"
+
+buildHostArguments
+startHostBinary
+
+sleep 0.2
+
+waitForPort "$COM_PORT" 58
+waitForPort "$CHR_PORT" 59
+
+configureSerialPorts
+
 return 0

src/server.sh

@@ -15,33 +15,62 @@ WSD_PORT=$(strip "$WSD_PORT")
 WEB_PID="/run/nginx.pid"
 WSD_PID="$QEMU_DIR/websocketd.pid"
 
-cp -r /var/www/* "$QEMU_DIR"
+prepareWebFiles() {
-rm -f "$WSD_PID" "$WEB_PID"
+  cp -r /var/www/* "$QEMU_DIR"
+  rm -f "$WSD_PID" "$WEB_PID"
 
-html "Starting $APP for $ENGINE..."
+  return 0
+}
 
-if ! disabled "${WEB:-}"; then
+configureWebPorts() {
+  sed -i "s/listen 5000 default_server;/listen $WEB_PORT default_server;/g" /etc/nginx/sites-enabled/web.conf
+  sed -i "s/proxy_pass http:\/\/127.0.0.1:8004\/;/proxy_pass http:\/\/127.0.0.1:$WSD_PORT\/;/g" /etc/nginx/sites-enabled/web.conf
+
+  return 0
+}
+
+configureIpv6Listen() {
+
+  # shellcheck disable=SC2143
+  if [ -f /proc/net/if_inet6 ] && [[ "$(cat /proc/sys/net/ipv6/conf/all/disable_ipv6 2>/dev/null)" != "1" ]] && [ -n "$(ifconfig -a | grep inet6)" ]; then
+    sed -i "s/listen $WEB_PORT default_server;/listen [::]:$WEB_PORT default_server ipv6only=off;/g" /etc/nginx/sites-enabled/web.conf
+  fi
+
+  return 0
+}
+
+configureWebServer() {
 
   mkdir -p /etc/nginx/sites-enabled
   cp /etc/nginx/default.conf /etc/nginx/sites-enabled/web.conf
 
-  sed -i "s/listen 5000 default_server;/listen $WEB_PORT default_server;/g" /etc/nginx/sites-enabled/web.conf
+  configureWebPorts
-  sed -i "s/proxy_pass http:\/\/127.0.0.1:8004\/;/proxy_pass http:\/\/127.0.0.1:$WSD_PORT\/;/g" /etc/nginx/sites-enabled/web.conf
+  configureIpv6Listen
 
-  # shellcheck disable=SC2143
+  return 0
-  if [ -f /proc/net/if_inet6 ] && [[ "$(cat /proc/sys/net/ipv6/conf/all/disable_ipv6 2>/dev/null)" != "1" ]] && [ -n "$(ifconfig -a | grep inet6)" ]; then
+}
 
-    sed -i "s/listen $WEB_PORT default_server;/listen [::]:$WEB_PORT default_server ipv6only=off;/g" /etc/nginx/sites-enabled/web.conf
+startWebServer() {
-
-  fi
 
   # Start webserver
   nginx -e stderr
+}
+
+startWebsocketServer() {
 
   # Start websocket server
   websocketd --address 127.0.0.1 --port="$WSD_PORT" /run/socket.sh >/var/log/websocketd.log &
   echo "$!" > "$WSD_PID"
+}
 
+prepareWebFiles
+
+html "Starting $APP for $ENGINE..."
+
+if ! disabled "${WEB:-}"; then
+  configureWebServer
+  startWebServer
+  startWebsocketServer
 fi
 
 return 0