Update Tailscale to v1.102.2

Packages are now signed with the Axis ACAP signing service. Document the
signing change and the upgrade steps (back up config and uninstall the old
version to avoid the "Vendor ID in manifest does not match" install error)
in the README and changelog.

CHANGELOG.md

@@ -5,6 +5,17 @@ links to its full release notes on GitHub.
 
 The format is based on [Keep a Changelog](https://keepachangelog.com/).
 
+## [1.98.9-Signed] - 2026-07-21 - Tailscale VPN 1.98.9 (Signed)
+
+- Packages are now signed with the Axis ACAP signing service and install
+  normally on AXIS OS 12.10 and later.
+- Vendor updated to `moshe@mohome.net` with the registered vendor ID.
+- `root` and `acap3` variants remain unsigned (manifest schema v1.x).
+- Upgrading from an earlier unsigned version can fail with "Couldn't
+  install: app" (device log: "Vendor ID in manifest does not match the
+  vendor ID of the previous version"). Back up your config, uninstall the
+  old version, then install this one.
+
 ## [1.98.8-2] - 2026-07-03 - Tailscale VPN 1.98.8-2
 
 ## [1.98.8-subnet-routing] - 2026-07-01 - Tailscale VPN 1.98.8 - Subnet Routing

README.md

@@ -46,7 +46,7 @@ lightweight WireGuard-based tunnel.
 
 - Secure remote access to cameras.
 - Easy to install via EAP package.
-- Works on **AXIS OS 10.12+** (non-root version, verified across 10.12–12.10).
+- Works on **AXIS OS 10.12+** (non-root version, verified across 10.12–13).
 - Works on **legacy AXIS OS 9.x / 10.x** via the ACAP 3 variant.
 - Based on **WireGuard VPN** technology.
 
@@ -71,8 +71,19 @@ access for third-party applications). Learn more:
 > root access for ACAPs). Use the **ACAP 3** build only on legacy cameras that
 > don't support ACAP 4 (AXIS OS 9–10).
 
+**Verified on AXIS OS 13** (13.0.0, aarch64).
+
 ## Installation
 
+> **Signed packages:** Release `.eap` files are signed with the Axis ACAP
+> signing service and install normally on AXIS OS 12.10 and later.
+>
+> **Upgrading from an earlier version?** The signing vendor changed, so
+> installing over a previously installed unsigned build can fail with
+> **"Couldn't install: app"** (device log: *"Vendor ID in manifest does not
+> match the vendor ID of the previous version"*). To upgrade: back up your app
+> configuration, **uninstall** the old version, then install the signed one.
+
 Get the **prebuilt `.eap` file** from the
 [Releases page](https://github.com/Mo3he/Axis_Cam_Tailscale/releases).
 
@@ -107,6 +118,7 @@ take effect immediately:
 | SOCKS5 Proxy Port | `1080` | Port for the outbound SOCKS5 proxy. |
 | Accept DNS | `off` | Passes `--accept-dns=true` to `tailscale up`. Allows the tailnet to push DNS settings to the camera. Not available on `armv7hf_acap3`. |
 | Accept Routes | `off` | Passes `--accept-routes=true` to `tailscale up`. Allows the camera to use subnet routes advertised by other nodes. Not available on `armv7hf_acap3`. |
+| Advertise Routes (Subnet Router) | *(empty)* | Comma-separated CIDRs (e.g. `192.168.1.0/24,10.0.0.0/8`) this camera will route for the tailnet, turning it into a subnet router. Approve the routes in the Tailscale admin console after saving. Leave blank to disable. |
 
 ## Ports & security
 
@@ -209,14 +221,15 @@ announcement for details.
   supports root third-party apps.
 - [x] **Migrate to Manifest Schema v2** - Done for `aarch64`/`armv7hf` (schema
   2.0.0, `compatibleOsVersions` declared); verified installability on OS
-  10.12–12.10.
+  10.12–13.
 - [x] **Audit for executable stack usage** - All compiled binaries report
   `flags rw-` (no executable stack) on every architecture and variant.
 - [x] **Verify web UI works over HTTPS** - Verified live; the UI only issues
   relative-path requests, so it inherits the page's protocol with no
   mixed-content risk.
-- [ ] **Sign the ACAP via the Axis ACAP Portal** - Deferred; the manifest's
-  `vendorId` is a placeholder value, not yet portal-registered.
+- [x] **Sign the ACAP via the Axis ACAP Portal** - Done; `aarch64`/`armv7hf`
+  packages are signed with the Axis ACAP signing service. The `root` and
+  `acap3` variants use manifest schema v1.x and are distributed unsigned.
 
 ### General Improvements
 

aarch64/app/manifest.json

@@ -4,10 +4,10 @@
         "setup": {
             "appName": "Tailscale_VPN",
             "friendlyName": "Tailscale VPN",
-            "vendor": "Mo3he",
-            "vendorId": "5741c1fb91",
+            "vendor": "moshe@mohome.net",
+            "vendorId": "70ee172dd9",
             "vendorUrl": "https://github.com/Mo3he/Axis_Cam_Tailscale",
-            "version": "1.98.9",
+            "version": "1.102.2",
             "architecture": "aarch64",
             "runMode": "respawn",
             "compatibleOsVersions": [

aarch64_ROOT/app/manifest.json

@@ -12,7 +12,7 @@
           },
             "vendorUrl": "https://github.com/Mo3he/Axis_Cam_Tailscale",
             "runMode": "respawn",
-            "version": "1.98.9",
+            "version": "1.102.2",
             "architecture": "aarch64"
         },
         "configuration": {

arm/app/manifest.json

@@ -4,10 +4,10 @@
         "setup": {
             "appName": "Tailscale_VPN",
             "friendlyName": "Tailscale VPN",
-            "vendor": "Mo3he",
-            "vendorId": "5741c1fb91",
+            "vendor": "moshe@mohome.net",
+            "vendorId": "70ee172dd9",
             "vendorUrl": "https://github.com/Mo3he/Axis_Cam_Tailscale",
-            "version": "1.98.9",
+            "version": "1.102.2",
             "architecture": "armv7hf",
             "runMode": "respawn",
             "compatibleOsVersions": [

arm_ROOT/app/manifest.json

@@ -12,7 +12,7 @@
           },
             "vendorUrl": "https://github.com/Mo3he/Axis_Cam_Tailscale",
             "runMode": "respawn",
-            "version": "1.98.9",
+            "version": "1.102.2",
             "architecture": "armv7hf"
         },
         "configuration": {

arm_acap3/app/package.conf

@@ -2,8 +2,8 @@ PACKAGENAME=Tailscale_VPN
 MENUNAME="Tailscale VPN"
 VENDOR="Mo3he"
 APPMAJORVERSION=1
-APPMINORVERSION=98
-APPMICROVERSION=9
+APPMINORVERSION=102
+APPMICROVERSION=2
 APPTYPE=armv7hf
 APPNAME=Tailscale_VPN
 APPOPTS=""