mirrors/scst
1
0
Fork 0
mirror of https://github.com/SCST-project/scst.git synced 2026-05-19 11:41:26 +00:00
Code Issues Packages Projects Releases Wiki Activity

iscsi-scst: Bring how-to in sync with scstadmin (merge r4302 from trunk)

Browse Source 
git-svn-id: http://svn.code.sf.net/p/scst/svn/branches/2.2.x@4697 d57e44dd-8a1f-0410-8b47-8ef2f437770f
This commit is contained in:
Bart Van Assche
2013-01-06 13:19:29 +00:00
parent b4608c470a
commit d3eb1ed610
1 changed files with 8 additions and 17 deletions
Download Patch File Download Diff File Expand all files Collapse all files

25
iscsi-scst/doc/iscsi-scst-howto.txt
View File

@@ -72,7 +72,7 @@ shown below. Verify the contents of the generated file.
3. Set up /etc/scst.conf
The scst.conf configuration file is loaded at system boot time by the
shell script /etc/init.d/iscsi-scst. The target, device and LUN
shell script /etc/init.d/scst. The target, device and LUN
configuration is defined in this file.
Here is the sample config file. Copy it in /etc/scst.conf
@@ -102,40 +102,31 @@ TARGET_DRIVER iscsi {
Note that for each SCSI device LUN 0 must exist. This is required by the SCSI
protocol and is also documented in SCST's README file.
Then run the following commands:
Then run the following command:
modprobe scst
modprobe scst_vdisk
modprobe iscsi-scst
iscsi-scstd
scstadmin -config /etc/scst.conf
/etc/init.d/scst start
You should have the working iSCSI-SCST now. Do the following steps if
you need to automatically configure it upon reboot.
4. Edit /etc/init.d/iscsi-scst
Add additional modules you need to the ADD_MODULES variable, e.g. scst_disk.
5. Create soft links in /etc/init.d
4. Create soft links in /etc/init.d
This will make SCST to start automatically upon system boot. Use either
chkconfig or update-rc.d, depending on the Linux distribution you are using.
An example for Debian systems such as Ubuntu:
update-rc.d iscsi-scst defaults
update-rc.d scst defaults
On openSUSE you can let SCST start automatically through the following commands:
insserv iscsi-scst
insserv scst
6. Restart SCST and iSCSI-SCST
5. Restart SCST and iSCSI-SCST
If you don't want to reboot now, you can make the above settings effective via
the following commands:
/etc/init.d/iscsi-scst stop
/etc/init.d/iscsi-scst start
/etc/init.d/scst restart
Installing and using iSCSI-SCST without using scstadmin via /sys interface