Some components don't have 'uninstall' targets although the top-level
Makefile references them. Some others don't remove the proper file.
Signed-off-by: Steven J. Magnani <steve@digidescorp.com>
git-svn-id: http://svn.code.sf.net/p/scst/svn/trunk@5290 d57e44dd-8a1f-0410-8b47-8ef2f437770f
Not all SCST components handle DESTDIR properly, or at all.
In particular:
* INSTALL_MOD_PATH should account for DESTDIR when 'make modules_install'
is invoked, so the kernel make infrastructure deploys the modules
and runs depmod against the proper directory tree.
* depmods must include a '-b' option to reference the proper directory tree.
* Drop special ISCSI_DESTDIR.
Signed-off-by: Steven J. Magnani <steve@digidescorp.com>
git-svn-id: http://svn.code.sf.net/p/scst/svn/trunk@5289 d57e44dd-8a1f-0410-8b47-8ef2f437770f
With a realtime kernel with full preemption (CONFIG_PREEMPT_RT_FULL),
spinlocks can sleep, interrupt handlers run in thread context, and
the standard local_irq functions manipulate preemptibility, not HW
interruptibility. Under these conditions, most calls to local_irq
functions should be replaced by no-ops. The CONFIG_PREEMPT_RT patch
defines _nort versions of local_irq functions that compile away
under CONFIG_PREEMPT_RT_FULL and compile to their "normal"
equivalents otherwise.
Define _nort equivalents to support compilation against both
"normal" and RT-patched kernels, and use the _nort local_irq
functons in cases where spinlocks are taken within a
local_irq_save() or local_irq_disable() block. Without these
changes, runtime warnings about "sleeping function called from
invalid context" occur.
Signed-off-by: Steven J. Magnani <steve@digidescorp.com>
[bvanassche: Edited patch description and comment in scst_priv.h]
git-svn-id: http://svn.code.sf.net/p/scst/svn/trunk@5288 d57e44dd-8a1f-0410-8b47-8ef2f437770f
When deriving the kernel version (KVER) from KDIR, the file
$(KDIR)/include/config/kernel.release should be preferred over
'make kernelversion'.
For example, the Ubuntu 3.2.0-23-generic kernel has a kernel.release
file containing '3.2.0-23-generic', but 'make kernelversion' returns
3.2.14. Since the modules are stored under /lib/modules/3.2.0-23-generic,
the value in kernel.release is the correct one to use.
Also:
- Evaluate KVER only once
- All depmod commands must include KVER
Signed-off-by: Steven J. Magnani <steve@digidescorp.com>
[bvanassche: Split long lines / removed trailing whitespace]
git-svn-id: http://svn.code.sf.net/p/scst/svn/trunk@5286 d57e44dd-8a1f-0410-8b47-8ef2f437770f
Running 'make modules_install' already triggers invocation of depmod,
hence leave it out from those Makefiles that use 'make modules_install'.
Signed-off-by: Steven J. Magnani <steve@digidescorp.com>
git-svn-id: http://svn.code.sf.net/p/scst/svn/trunk@5283 d57e44dd-8a1f-0410-8b47-8ef2f437770f
Some users think these instructions are not valid for Linux 3.x kernels
since there are examples in this document referring to a 2.6.x kernel.
Hence update the examples.
Explain how to discover initiator port WWNs since this is nontrivial for
novice users.
Update the SourceForge SVN SCST URL since it changed a few months ago.
Move the qla2xxx module unload step to after the system reboot. Performing
that step after the reboot even though that module has already been
blacklisted is necessary because at that time initrd has not yet been
rebuilt and hence a reboot can cause that module to be reloaded from initrd.
The steps for building and installing SCST itself have been reduced from
four commands into a single command.
The sample scst.conf file is now generated - local FC port WWNs are
discovered automatically.
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
git-svn-id: http://svn.code.sf.net/p/scst/svn/trunk@5135 d57e44dd-8a1f-0410-8b47-8ef2f437770f
Replace a kmalloc() and sprintf() call by a kasprintf() call. This
patch does not change any functionality.
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
git-svn-id: http://svn.code.sf.net/p/scst/svn/trunk@4998 d57e44dd-8a1f-0410-8b47-8ef2f437770f
The "force_close" sysfs attribute remains to exist for some time
after q2t_close_session() finished. Avoid that q2t_close_session()
invokes q2t_sess_put() more than once by removing a session from
the session list before returning. Avoid that that disabling a
target after q2t_close_session() has been invoked triggers a call
of q2t_sess_put(). Avoid that triggering the "force_close" sysfs
attribute after a target has been disabled triggers an additional
call of q2t_sess_put().
git-svn-id: http://svn.code.sf.net/p/scst/svn/trunk@4944 d57e44dd-8a1f-0410-8b47-8ef2f437770f
HARDWARE ERROR sense is very strong considered be "internal failure", so
might lead to serios initiator side issues up to disconnect from device. In
many cases WRITE or READ ERROR sense can be used instead. All remaining
usages must be logged.
git-svn-id: http://svn.code.sf.net/p/scst/svn/trunk@4911 d57e44dd-8a1f-0410-8b47-8ef2f437770f
That patch contains the following changes:
* Move the code for creating a "close_sess" sysfs attribute from iscsi-scst to
the SCST core such that it becomes available for other target drivers. This
does not change the functionality of iscsi-scst.
* Add code in ib_srpt and qla2x00t to allow a session to be forcibly closed from
user space.
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
git-svn-id: http://svn.code.sf.net/p/scst/svn/trunk@4852 d57e44dd-8a1f-0410-8b47-8ef2f437770f
Currently the install location of SCST is pretty much hard coded into
the Makefiles to be /usr/local.
I am custom building a system for ZFS & SCST and I want to install in
/usr instead of /usr/local.
Currently I am doing a “find . -name Makefile -exec sed -i 's:/usr/local:/usr:g'
{} \;” to accommodate this.
This patch fixes it.
From Sietse van Zanen <sietse@wizdom.nu>
git-svn-id: http://svn.code.sf.net/p/scst/svn/trunk@4791 d57e44dd-8a1f-0410-8b47-8ef2f437770f
The expression "sg_dma_address(prm->sg)" occurs several times in several
pieces of code that compute a DMA address. Make these pieces of code
somewhat easier to read by storing the DMA address in a temporary variable
called "dma_addr".
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
git-svn-id: http://svn.code.sf.net/p/scst/svn/trunk@4778 d57e44dd-8a1f-0410-8b47-8ef2f437770f
It is cumbersome to change SCST_INC_DIR and SCST_DIR in each Makefile
before and after a release. Hence modify the Makefiles such that these
paths are detected automatically.
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
git-svn-id: http://svn.code.sf.net/p/scst/svn/trunk@4740 d57e44dd-8a1f-0410-8b47-8ef2f437770f
Vladislav Bolkhovitin
Bart Van Assche