mirror of
https://github.com/SCST-project/scst.git
synced 2026-05-17 10:41:26 +00:00
3b661a286d
This patch provides an interface to do the following (using MBC 0x3B):
- Displays (in hex) the LED config words for all three LEDs.
- Programs the config words for one LED or for all three LEDs.
The sysfs node defined is named beacon_config.
First, to allow driver to gain LED control, do this:
# echo 1 > /sys/class/scsi_host/host#/beacon
Then, to display config words for all three LEDs do this:
# cat /sys/class/scsi_host/host#/beacon_config
To set config words for all three LEDs do this:
# echo 3 xxxx yyyy zzzz > /sys/class/scsi_host/host#/beacon_config
Or, to set config word for a specific single LED n do this:
# echo n xxxx > /sys/class/scsi_host/host#/beacon_config
where n is the LED number (0, 1, 2)
Finally, to restore LED control back to firmware, do this:
# echo 0 > /sys/class/scsi_host/host#/beacon
Link: https://lore.kernel.org/r/20200212214436.25532-2-hmadhani@marvell.com
Signed-off-by: Joe Carnuccio <joe.carnuccio@cavium.com>
Signed-off-by: Himanshu Madhani <hmadhani@marvell.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
[ commit 07553b1e83b46414caa693ba10d1a16487409b61 upstream ]
git-svn-id: http://svn.code.sf.net/p/scst/svn/trunk@8786 d57e44dd-8a1f-0410-8b47-8ef2f437770f
Overview ======== This is the SCST development repository. It contains not a single project SCST as one can think, but a number of them, which are divided as the following: 1. SCST core in scst/ subdirectory 2. Administration utility for SCST core scstadmin in scstadmin/ 3. Target drivers in own subdirectories qla2x00t/, iscsi-scst/, etc. 4. User space programs in usr/ subdirectory, like fileio_tgt. 5. Some various docs in doc/ subdirectory. Those subprojects are in most cases independent from each other, although some of them depend from the SCST core. They put in the single repository only to simplify their development, they are released independently. Thus, use "make all" only if you really need to build everything. Otherwise build only what you need, like for iSCSI-SCST: make scst scst_install iscsi iscsi_install For more information about each subproject see their README files. QLogic target driver ==================== The QLogic target driver qla2x00t is the old driver, forked from qla2xxx several years ago. It is very stable, well tested and actively used in many production setups. There is also a new driver that supports 32 Gb/s FC in the qla2x00t-32gbit directory. That driver has not yet reached the same maturity level as the old qla2x00t driver. Vladislav Bolkhovitin <vst@vlnb.net>, http://scst.sourceforge.net