mirror of
https://github.com/SCST-project/scst.git
synced 2026-05-14 09:11:27 +00:00
799ddae085
svn+ssh://yanb123@svn.code.sf.net/p/scst/svn/trunk
........
r5322 | vlnb | 2014-03-05 05:27:21 +0200 (Wed, 05 Mar 2014) | 13 lines
scst_vdisk: Make vdisk_nullio size configurable
Keep the default size of vdisk_nullio devices at VDISK_NULLIO_SIZE. Add
a sysfs attribute 'size' which is the size of a vdisk device in
bytes. Make the size of vdisk_nullio devices configurable. Accept
"size" and "size_mb" as creation parameters for vdisk_nullio
devices. Generate a CAPACITY DATA HAS CHANGED unit attention after size
changes. Refuse any attempt to change the size into a number that is
not a multiple of the block size.
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
........
r5323 | bvassche | 2014-03-06 09:29:00 +0200 (Thu, 06 Mar 2014) | 1 line
scst_vdisk: Avoid that smatch complains about unreachable code
........
r5324 | vlnb | 2014-03-07 06:02:39 +0200 (Fri, 07 Mar 2014) | 27 lines
PERSISTENT RESERVE IN: Suppress a kernel warning for small output buffer sizes
This patch suppresses the following error message and kernel warning:
scst: ***ERROR***: Too big response data len 24 (max 8), limiting it to the max (dev iis)
Call Trace:
[<ffffffff818b1193>] ? dump_stack+0x41/0x56
[<ffffffffa01c1a8f>] ? scst_set_resp_data_len+0x82/0xb1 [scst]
[<ffffffffa01ca80f>] ? scst_pr_read_reservation+0xbf/0xc4 [scst]
[<ffffffffa01b707b>] ? scst_persistent_reserve_in_local+0x140/0x1ce [scst]
[<ffffffffa01b7cee>] ? scst_exec_check_blocking+0x57/0xf1 [scst]
[<ffffffffa01b85f4>] ? scst_process_active_cmd+0x86c/0x136f [scst]
[<ffffffffa01b913c>] ? scst_do_job_active+0x45/0x5b [scst]
[<ffffffffa01b939c>] ? scst_cmd_thread+0x218/0x2b7 [scst]
[<ffffffff8105292a>] ? wake_up_bit+0x23/0x23
[<ffffffffa01b9184>] ? scst_cmd_tasklet+0x32/0x32 [scst]
[<ffffffff81052355>] ? kthread_freezable_should_stop+0x51/0x51
[<ffffffffa01b9184>] ? scst_cmd_tasklet+0x32/0x32 [scst]
[<ffffffff81052400>] ? kthread+0xab/0xb3
[<ffffffff81052355>] ? kthread_freezable_should_stop+0x51/0x51
[<ffffffff818b4e3c>] ? ret_from_fork+0x7c/0xb0
[<ffffffff81052355>] ? kthread_freezable_should_stop+0x51/0x51
Reported-by: Roman Bogdanov <bogdanovr@gmail.com>
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
........
r5325 | bvassche | 2014-03-08 15:30:29 +0200 (Sat, 08 Mar 2014) | 1 line
nightly build: Update kernel versions
........
r5326 | vlnb | 2014-03-13 05:50:37 +0200 (Thu, 13 Mar 2014) | 3 lines
Update link to Gentoo HOWTO from Jurie Botha
........
r5329 | vlnb | 2014-03-15 03:38:06 +0200 (Sat, 15 Mar 2014) | 3 lines
Cleanup
........
r5330 | vlnb | 2014-03-15 03:38:37 +0200 (Sat, 15 Mar 2014) | 3 lines
Implement REPORT SUPPORTED TASK MANAGEMENT FUNCTIONS command
........
r5331 | vlnb | 2014-03-15 03:40:57 +0200 (Sat, 15 Mar 2014) | 8 lines
scst_vdisk: Remove an unused parameter from vdisk_fsync*()
The "struct vdisk_cmd_params *p" parameter is neither used by vdisk_fsync(),
vdisk_fsync_blockio() nor by vdisk_fsync_fileio() so remove it.
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
........
r5332 | vlnb | 2014-03-15 03:42:06 +0200 (Sat, 15 Mar 2014) | 8 lines
vdisk_blockio: Change default vendor name back to "SCST_BIO"
In r5316 the default vendor name for vdisk_blockio devices was changed
into "SCST_FIO". Change this back into "SCST_BIO".
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
........
r5333 | vlnb | 2014-03-15 03:44:35 +0200 (Sat, 15 Mar 2014) | 8 lines
vdisk_blockio: Add VERIFY implementation
There is already an implementation of the VERIFY command for vdisk_fileio
devices. Add an implementation for vdisk_blockio devices.
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
........
r5334 | vlnb | 2014-03-15 04:01:17 +0200 (Sat, 15 Mar 2014) | 8 lines
scst_vdisk: Implement COMPARE AND WRITE
Ensure that COMPARE AND WRITE is executed atomically by serializing
all COMPARE AND WRITE commands per device (SCST_SERIALIZED).
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
........
r5335 | vlnb | 2014-03-15 04:09:17 +0200 (Sat, 15 Mar 2014) | 5 lines
Fix URL to SCST website
Signed-off-by: Steven J. Magnani <steve@digidescorp.com>
........
r5336 | vlnb | 2014-03-15 04:13:58 +0200 (Sat, 15 Mar 2014) | 3 lines
Cleanup
........
r5337 | bvassche | 2014-03-15 08:47:26 +0200 (Sat, 15 Mar 2014) | 1 line
scripts/kernel-functions: Kernel 3.13.6 build fix
........
r5338 | bvassche | 2014-03-16 15:38:50 +0200 (Sun, 16 Mar 2014) | 1 line
srpt: Minor buid process terminology change
........
r5339 | bvassche | 2014-03-18 17:35:13 +0200 (Tue, 18 Mar 2014) | 1 line
ib_srpt: Avoid that session logout hangs sporadically
........
r5340 | vlnb | 2014-03-19 06:28:46 +0200 (Wed, 19 Mar 2014) | 8 lines
scst/README: Show how to read SCST sysfs attributes
Make the behavior of SCST sysfs attributes more clear by adding
examples in scst/README of code for reading and writing these attributes.
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
........
r5344 | bvassche | 2014-03-20 17:13:50 +0200 (Thu, 20 Mar 2014) | 1 line
ib_srpt: Simplify srpt_handle_cmd()
........
r5345 | bvassche | 2014-03-20 17:14:45 +0200 (Thu, 20 Mar 2014) | 5 lines
ib_srpt: Micro-optimize I/O context state manipulation
All ioctx->state manipulations are serialized per command so it is
not necessary to use locking to protect these manipulations.
........
r5346 | bvassche | 2014-03-20 17:15:54 +0200 (Thu, 20 Mar 2014) | 8 lines
ib_srpt: Handle GID change events properly
The mlx4_core driver generates a GID change event after a port has been
changed from IB into Ethernet mode. Avoid that this causes the following
error message to appear in the system log:
ib_srpt: ***ERROR***: received unrecognized IB event 18
........
r5347 | bvassche | 2014-03-20 17:16:27 +0200 (Thu, 20 Mar 2014) | 1 line
ib_srpt/Makefile: Add kerneldoc target
........
r5348 | bvassche | 2014-03-20 17:17:04 +0200 (Thu, 20 Mar 2014) | 1 line
ib_srpt: Fix an error reported by the kerneldoc tool
........
r5349 | bvassche | 2014-03-20 17:18:06 +0200 (Thu, 20 Mar 2014) | 5 lines
ib_srpt: Avoid that cmd_wait_list processing triggers command reordering
Although harmless for SCSI commands with SIMPLE ordering, avoid that commands
received before RTU can get reordered.
........
r5350 | bvassche | 2014-03-20 17:18:38 +0200 (Thu, 20 Mar 2014) | 2 lines
ib_srpt: Micro-optimize SRP_CMD parsing
........
r5351 | bvassche | 2014-03-20 17:19:05 +0200 (Thu, 20 Mar 2014) | 1 line
ib_srpt: Sync information unit memory only once
........
r5352 | bvassche | 2014-03-20 17:19:34 +0200 (Thu, 20 Mar 2014) | 2 lines
ib_srpt: Introduce a temporary variable in srpt_handle_new_iu()
........
r5353 | bvassche | 2014-03-20 17:20:55 +0200 (Thu, 20 Mar 2014) | 2 lines
ib_srpt: Micro-optimize polling
........
r5354 | bvassche | 2014-03-20 17:22:19 +0200 (Thu, 20 Mar 2014) | 5 lines
ib_srpt: Rework multi-channel support
Store initiator and target port ID's once per nexus instead of in each
channel data structure.
........
r5355 | bvassche | 2014-03-20 17:23:16 +0200 (Thu, 20 Mar 2014) | 2 lines
ib_srpt: Simplify channel state management code
........
r5356 | bvassche | 2014-03-20 17:24:18 +0200 (Thu, 20 Mar 2014) | 5 lines
ib_srpt: Defer destroying the QP until the TimeWait state has been left
This is necessary to avoid that a login gets rejected due to reusing a
queue pair number that has not yet been freed by the target side.
........
r5357 | bvassche | 2014-03-20 17:25:34 +0200 (Thu, 20 Mar 2014) | 5 lines
ib_srpt: Rework waiting for last WQE
After having changed the queue pair state into "error", queue an additional
work request instead of waiting for the last WQE event.
........
r5358 | bvassche | 2014-03-20 17:26:48 +0200 (Thu, 20 Mar 2014) | 1 line
srpt/session-management.txt: Document how sessions are managed by the ib_srpt driver
........
r5359 | bvassche | 2014-03-20 18:10:19 +0200 (Thu, 20 Mar 2014) | 1 line
scst_const.h: Make COMPARE_AND_WRITE definition available for kernel versions 3.6..3.11
........
r5360 | vlnb | 2014-03-21 03:58:13 +0200 (Fri, 21 Mar 2014) | 3 lines
In VERIFY commands BYTCHK 1x is not supported (yet)
........
r5361 | bvassche | 2014-03-21 18:29:26 +0200 (Fri, 21 Mar 2014) | 1 line
srpt/Makefile: Avoid that the build process depends on source control tools
........
r5362 | vlnb | 2014-03-22 01:12:42 +0200 (Sat, 22 Mar 2014) | 3 lines
Fix error recovery of internal commands
........
r5363 | bvassche | 2014-03-24 13:53:00 +0200 (Mon, 24 Mar 2014) | 1 line
ib_srpt: Clarify a kernel-doc comment
........
r5364 | bvassche | 2014-03-24 13:55:56 +0200 (Mon, 24 Mar 2014) | 1 line
ib_srpt: Add newline at the end of kernel warning statements
........
r5365 | bvassche | 2014-03-24 13:57:39 +0200 (Mon, 24 Mar 2014) | 5 lines
ib_srpt: Change the severity level of a log message
Make sure that target port state changes get logged even with
debugging disabled.
........
r5366 | bvassche | 2014-03-24 13:59:27 +0200 (Mon, 24 Mar 2014) | 5 lines
ib_srpt: Clean up srpt_destroy_ch_ib()
All callers guarantee that the completion queue is empty so it is
not necessary to invoke ib_poll_cq() from inside this function.
........
r5367 | bvassche | 2014-03-24 14:01:07 +0200 (Mon, 24 Mar 2014) | 5 lines
ib_srpt: Micro-optimize srpt_adjust_srq_wr_avail()
The overhead of atomic_add_return() is lower than that of a
spin_lock() / spin_unlock() pair, hence switch to the former.
........
r5368 | bvassche | 2014-03-24 14:03:09 +0200 (Mon, 24 Mar 2014) | 20 lines
ib_srpt: Fix a kernel warning
Avoid that the following (very rare) kernel warning is reported
when an ib_srpt target port is disabled while I/O is ongoing:
WARNING: CPU: 3 PID: 12259 at srpt/src/ib_srpt.c:3334 srpt_xmit_response+0x165/0x300 [ib_srpt]()
Unexpected command state 6
Call Trace:
[<ffffffff814a15dc>] dump_stack+0x4e/0x7a
[<ffffffff8104bc5d>] warn_slowpath_common+0x7d/0xa0
[<ffffffff8104bccc>] warn_slowpath_fmt+0x4c/0x50
[<ffffffffa0771525>] srpt_xmit_response+0x165/0x300 [ib_srpt]
[<ffffffffa082aacc>] scst_xmit_response+0xbc/0x560 [scst]
[<ffffffffa083123d>] scst_process_active_cmd+0x29d/0x7b0 [scst]
[<ffffffffa0832bd9>] scst_do_job_active+0x89/0x1a0 [scst]
[<ffffffffa0832e4f>] scst_cmd_thread+0x15f/0x350 [scst]
[<ffffffff810766cd>] kthread+0xed/0x110
[<ffffffff814b312c>] ret_from_fork+0x7c/0xb0
---[ end trace 591f7af7d006fc0e ]---
........
r5369 | bvassche | 2014-03-24 14:04:44 +0200 (Mon, 24 Mar 2014) | 5 lines
ib_srpt: Add a kernel warning
Invoking srpt_zerolength_write() before the queue pair has reached
the error state is a bug, so complain loudly if that happens.
........
r5370 | bvassche | 2014-03-24 14:07:43 +0200 (Mon, 24 Mar 2014) | 7 lines
ib_srpt: Avoid waiting for missing error completions
Apparently with mlx4 firmware up to and including 2.30.8000 it is not
guaranteed that for a QP associated with an SRQ error completions are
generated for all pending work requests. Avoid triggering
srpt_pending_cmd_timeout() for missing error completions.
........
r5371 | bvassche | 2014-03-25 18:19:00 +0200 (Tue, 25 Mar 2014) | 1 line
nightly build: Update kernel versions
........
r5382 | vlnb | 2014-03-26 04:31:52 +0200 (Wed, 26 Mar 2014) | 6 lines
Black hole functionality added
Scst_mutex intentially used directly in the sysfs handler, because
comming sysfs improvements will allow that.
........
r5383 | vlnb | 2014-03-26 05:18:03 +0200 (Wed, 26 Mar 2014) | 5 lines
documentation: Document SCST_SERIALIZED and SCST_STRICTLY_SERIALIZED
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
........
r5384 | vlnb | 2014-03-26 05:18:36 +0200 (Wed, 26 Mar 2014) | 3 lines
Cleanup
........
r5385 | vlnb | 2014-03-26 05:20:04 +0200 (Wed, 26 Mar 2014) | 9 lines
scst_local: Remove two superfluous tests
The to_scst_lcl_sess() macro is based on container_of() and hence never
returns NULL. Hence remove the two tests that compare the result of that
macro against NULL.
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
........
r5386 | vlnb | 2014-03-26 05:21:25 +0200 (Wed, 26 Mar 2014) | 7 lines
iscsi-scst: Introduce ARRAY_SIZE()
This patch does not change any functionality.
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
........
r5387 | vlnb | 2014-03-26 05:22:16 +0200 (Wed, 26 Mar 2014) | 8 lines
scst: Clarify a comment
The comment above scst_nexus_loss() is somewhat confusing so change
it into something that is more clear.
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
........
r5388 | vlnb | 2014-03-26 05:23:57 +0200 (Wed, 26 Mar 2014) | 9 lines
scst_vdisk: Fix READ CAPACITY(10)
SBC-2 defines the LBA as a 32-bit field that starts at offset 2 and
not as a 64-bit field.
Reported-by: Mike Christie <michaelc@cs.wisc.edu>
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
........
r5389 | bvassche | 2014-03-26 13:56:13 +0200 (Wed, 26 Mar 2014) | 4 lines
ib_srpt: Clean up srpt_handle_rdma_comp()
This patch does not change any functionality.
........
r5390 | bvassche | 2014-03-26 13:56:59 +0200 (Wed, 26 Mar 2014) | 4 lines
ib_srpt: Clean up srpt_handle_send_err_comp()
This patch does not change any functionality.
........
r5391 | bvassche | 2014-03-26 13:58:25 +0200 (Wed, 26 Mar 2014) | 4 lines
ib_srpt: Clean up srpt_handle_rdma_err_comp()
This patch does not change any functionality.
........
r5392 | bvassche | 2014-03-26 13:59:37 +0200 (Wed, 26 Mar 2014) | 5 lines
ib_srpt: Suppress superfluous error messages
Only complain about a missing completion for I/O contexts that are
in a state where the ib_srpt driver is waiting for the HCA.
........
r5393 | bvassche | 2014-03-26 14:00:43 +0200 (Wed, 26 Mar 2014) | 5 lines
ib_srpt: Make srpt_abort_cmd() state checks more strict
Complain if srpt_abort_cmd() is called for an I/O context that is
being processed by SCST and not by the HCA.
........
r5394 | vlnb | 2014-03-27 00:16:16 +0200 (Thu, 27 Mar 2014) | 3 lines
Cosmetics
........
r5395 | vlnb | 2014-03-27 01:51:36 +0200 (Thu, 27 Mar 2014) | 3 lines
Reimplement dropping of TM requests in a more reliable manner
........
r5396 | vlnb | 2014-03-27 03:57:08 +0200 (Thu, 27 Mar 2014) | 3 lines
Possibility to specify SCSI target device name added
........
r5397 | bvassche | 2014-03-27 10:27:45 +0200 (Thu, 27 Mar 2014) | 6 lines
Fix two checkpatch complaints about whitespace
Avoid that checkpatch reports the following error message:
ERROR: "(foo*)" should be "(foo *)"
........
r5398 | bvassche | 2014-03-27 10:34:27 +0200 (Thu, 27 Mar 2014) | 6 lines
Avoid that checkpatch complains that return is not a function
Avoid that checkpatch reports the following error message:
ERROR: return is not a function, parentheses are not required
........
r5399 | bvassche | 2014-03-27 10:39:53 +0200 (Thu, 27 Mar 2014) | 1 line
scripts/generate-kernel-patch: Fix for kernel versions 3.7, 3.10, 3.12 and 3.13
........
r5400 | vlnb | 2014-03-29 04:07:22 +0300 (Sat, 29 Mar 2014) | 3 lines
Cleanup
........
r5401 | bvassche | 2014-04-01 20:46:36 +0300 (Tue, 01 Apr 2014) | 1 line
vdisk_blockio: Temporarily disable COMPARE AND WRITE support
........
r5402 | bvassche | 2014-04-02 00:05:31 +0300 (Wed, 02 Apr 2014) | 1 line
vdisk_blockio: Fix the (recently enabled) VERIFY command
........
r5403 | bvassche | 2014-04-03 18:58:16 +0300 (Thu, 03 Apr 2014) | 1 line
ib_srpt: RHEL 6.5 build fix
........
r5404 | vlnb | 2014-04-04 03:57:30 +0300 (Fri, 04 Apr 2014) | 3 lines
Fix typo in scst_report_supported_tm_fns() reported by Steve Magnani <steve.magnani@digidescorp.com>
........
r5405 | bvassche | 2014-04-04 07:38:33 +0300 (Fri, 04 Apr 2014) | 1 line
scripts/specialize-patch: Handle numbers surrounded by parentheses properly
........
r5406 | bvassche | 2014-04-04 08:50:52 +0300 (Fri, 04 Apr 2014) | 1 line
scripts/specialize-patch: Rework r5405
........
r5407 | bvassche | 2014-04-04 08:56:25 +0300 (Fri, 04 Apr 2014) | 1 line
nightly build: Update kernel versions
........
git-svn-id: http://svn.code.sf.net/p/scst/svn/branches/iser@5408 d57e44dd-8a1f-0410-8b47-8ef2f437770f
This is the SCST development repository. It contains not a single project SCST as one can think, but a number of them, which are divided as the following: 1. SCST core in scst/ subdirectory 2. Administration utility for SCST core scstadmin in scstadmin/ 3. Target drivers in own subdirectories qla2x00t/, iscsi-scst/, etc. 4. User space programs in usr/ subdirectory, like fileio_tgt. 5. Some various docs in doc/ subdirectory. Those subprojects are in most cases independent from each other, although some of them depend from the SCST core. They put in the single repository only to simplify their development, they are released independently. Thus, use "make all" only if you really need to build everything. Otherwise build only what you need, like for iSCSI-SCST: make scst scst_install iscsi iscsi_install For more information about each subproject see their README files. Vladislav Bolkhovitin <vst@vlnb.net>, http://scst.sourceforge.net