The API to put scattered_message into output_stream() is gone in seastar
API level 9, transport is the only place in Scylla that still uses it.
The change is to put the response as a sequence of temporary_buffer-s.
This preserves the zero-copy-ness of the reply, but needs few things to
care about.
First, the response header frame needs to be put as zero-copy buffer
too. Despite output_stream() supports semi-mixed mode, where z.c.
buffers can follow the buffered writes, it won't apply here. The socket
is flushed() in batched mode, so even if the first reply populates the
stream with data and flushes it, the next response may happen to start
putting the header frame before delayed flush took place.
Second, because socket is flushed in batch-flush poller, the temporary
buffers that are put into it must hold the foreigh_ptr with the response
object. With scattered message this was implemented with the help of a
delter that was attached to the message, now the deleter is shared
between all buffers.
Signed-off-by: Pavel Emelyanov <xemul@scylladb.com>
`cql_transport::response::make_frame` used to throw `protocol_exception`.
With this change it will return `result_with_exception_ptr<sstring>` instead.
Code changes are propagated to `cql_transport::cql_server::response::make_message`
and from there to `cql_transport::cql_server::connection::write_response`.
`write_response` continuation calling `make_message` used to transform
the exception from `make_message` to an exception future, and now the
logic stays the same, just explicitly stated at this code layer,
so the behavior is not changed.
Refs: #24567
Replace throwing `protocol_exception` with returning it as a result
or an exceptional future in the transport server module. The goal is
to improve performance.
Most of the `protocol_exception` throws were made from
`fragmented_temporary_buffer` module, by passing `exception_thrower()`
to its `read*` methods. `fragmented_temporary_buffer` is changed so
that it now accepts an exception creator, not exception thrower.
`fragmented_temporary_buffer_concepts::ExceptionCreator` concept replaced
`fragmented_temporary_buffer_concepts::ExceptionThrower` and all
methods that have been throwing now return failed result of type
`utils::result_with_exception_ptr`. This change is then propagated to the callers.
The scope of this patch is `protocol_exception`, so commitlog just calls
`.value()` method on the result. If the result failed, that will throw the
exception from the result, as defined by `utils::result_with_exception_ptr_throw_policy`.
This means that the behavior of commitlog module stays the same.
transport server module handles results gracefully. All the caller functions
that return non-future value `T` now return `utils::result_with_exception_ptr<T>`.
When the caller is a function that returns a future, and it receives
failed result, `make_exception_future(std::move(failed_result).value())`
is returned. The rest of the callstack up to the transport server `handle_error`
function is already working without throwing, and that's how zero throws is
achieved.
Fixes: #24567
now that we are allowed to use C++23. we now have the luxury of using
`std::views::transform`.
in this change, we:
- replace `boost::adaptors::transformed` with `std::views::transform`
- use `fmt::join()` when appropriate where `boost::algorithm::join()`
is not applicable to a range view returned by `std::view::transform`.
- use `std::ranges::fold_left()` to accumulate the range returned by
`std::view::transform`
- use `std::ranges::fold_left()` to get the maximum element in the
range returned by `std::view::transform`
- use `std::ranges::min()` to get the minimal element in the range
returned by `std::view::transform`
- use `std::ranges::equal()` to compare the range views returned
by `std::view::transform`
- remove unused `#include <boost/range/adaptor/transformed.hpp>`
- use `std::ranges::subrange()` instead of `boost::make_iterator_range()`,
to feed `std::views::transform()` a view range.
to reduce the dependency to boost for better maintainability, and
leverage standard library features for better long-term support.
this change is part of our ongoing effort to modernize our codebase
and reduce external dependencies where possible.
limitations:
there are still a couple places where we are still using
`boost::adaptors::transformed` due to the lack of a C++23 alternative
for `boost::join()` and `boost::adaptors::uniqued`.
Signed-off-by: Kefu Chai <kefu.chai@scylladb.com>
Closesscylladb/scylladb#21700
Our "sstring_view" is an historic alias for the standard std::string_view.
The test/ directory used this old alias in a few of random places, let's
change them to use the standard type name.
Refs #4062.
Signed-off-by: Nadav Har'El <nyh@scylladb.com>
when building scylla with the standard library from GCC-14.2, shipped by
fedora 41, we have following build failure:
```
/home/kefu/.local/bin/clang++ -DDEBUG -DDEBUG_LSA_SANITIZER -DFMT_SHARED -DSANITIZE -DSCYLLA_BUILD_MODE=debug -DSCYLLA_ENABLE_ERROR_INJECTION -DSEASTAR_API_LEVEL=7 -DSEASTAR_DEBUG -DSEASTAR_DEBUG_PROMISE -DSEASTAR_DEBUG_SHARED_PTR -DSEASTAR_DEFAULT_ALLOCATOR -DSEASTAR_LOGGER_COMPILE_TIME_FMT -DSEASTAR_LOGGER_TYPE_STDOUT -DSEASTAR_SCHEDULING_GROUPS_COUNT=16 -DSEASTAR_SHUFFLE_TASK_QUEUE -DSEASTAR_SSTRING -DSEASTAR_TYPE_ERASE_MORE -DXXH_PRIVATE_API -DCMAKE_INTDIR=\"Debug\" -I/home/kefu/dev/scylladb -I/home/kefu/dev/scylladb/build/gen -I/home/kefu/dev/scylladb/seastar/include -I/home/kefu/dev/scylladb/build/seastar/gen/include -I/home/kefu/dev/scylladb/build/seastar/gen/src -isystem /home/kefu/dev/scylladb/abseil -g -Og -g -gz -std=gnu++23 -fvisibility=hidden -Wall -Werror -Wextra -Wno-error=deprecated-declarations -Wimplicit-fallthrough -Wno-c++11-narrowing -Wno-deprecated-copy -Wno-mismatched-tags -Wno-missing-field-initializers -Wno-overloaded-virtual -Wno-unsupported-friend -Wno-unused-parameter -ffile-prefix-map=/home/kefu/dev/scylladb/build=. -march=x86-64-v3 -mpclmul -Xclang -fexperimental-assignment-tracking=disabled -Werror=unused-result -fstack-clash-protection -fsanitize=address -fsanitize=undefined -MD -MT CMakeFiles/scylla-main.dir/Debug/init.cc.o -MF CMakeFiles/scylla-main.dir/Debug/init.cc.o.d -o CMakeFiles/scylla-main.dir/Debug/init.cc.o -c /home/kefu/dev/scylladb/init.cc
In file included from /home/kefu/dev/scylladb/init.cc:12:
In file included from /home/kefu/dev/scylladb/db/config.hh:20:
In file included from /home/kefu/dev/scylladb/locator/abstract_replication_strategy.hh:26:
/home/kefu/dev/scylladb/locator/tablets.hh:410:30: error: unexpected type name 'size_t': expected expression
410 | return boost::irange<size_t>(0, tablet_count()) | boost::adaptors::transformed([] (size_t i) {
| ^
/home/kefu/dev/scylladb/locator/tablets.hh:410:23: error: no member named 'irange' in namespace 'boost'
410 | return boost::irange<size_t>(0, tablet_count()) | boost::adaptors::transformed([] (size_t i) {
| ~~~~~~~^
/home/kefu/dev/scylladb/locator/tablets.hh:410:38: error: left operand of comma operator has no effect [-Werror,-Wunused-value]
410 | return boost::irange<size_t>(0, tablet_count()) | boost::adaptors::transformed([] (size_t i) {
| ^
3 errors generated.
[16/782] Building CXX object CMakeFiles/scylla-main.dir/Debug/keys.cc.o
[17/782] Building CXX object CMakeFiles/scylla-main.dir/Debug/counters.cc.o
[18/782] Building CXX object CMakeFiles/scylla-main.dir/Debug/partition_slice_builder.cc.o
[19/782] Building CXX object CMakeFiles/scylla-main.dir/Debug/mutation_query.cc.o
FAILED: CMakeFiles/scylla-main.dir/Debug/mutation_query.cc.o
/home/kefu/.local/bin/clang++ -DDEBUG -DDEBUG_LSA_SANITIZER -DFMT_SHARED -DSANITIZE -DSCYLLA_BUILD_MODE=debug -DSCYLLA_ENABLE_ERROR_INJECTION -DSEASTAR_API_LEVEL=7 -DSEASTAR_DEBUG -DSEASTAR_DEBUG_PROMISE -DSEASTAR_DEBUG_SHARED_PTR -DSEASTAR_DEFAULT_ALLOCATOR -DSEASTAR_LOGGER_COMPILE_TIME_FMT -DSEASTAR_LOGGER_TYPE_STDOUT -DSEASTAR_SCHEDULING_GROUPS_COUNT=16 -DSEASTAR_SHUFFLE_TASK_QUEUE -DSEASTAR_SSTRING -DSEASTAR_TYPE_ERASE_MORE -DXXH_PRIVATE_API -DCMAKE_INTDIR=\"Debug\" -I/home/kefu/dev/scylladb -I/home/kefu/dev/scylladb/build/gen -I/home/kefu/dev/scylladb/seastar/include -I/home/kefu/dev/scylladb/build/seastar/gen/include -I/home/kefu/dev/scylladb/build/seastar/gen/src -isystem /home/kefu/dev/scylladb/abseil -g -Og -g -gz -std=gnu++23 -fvisibility=hidden -Wall -Werror -Wextra -Wno-error=deprecated-declarations -Wimplicit-fallthrough -Wno-c++11-narrowing -Wno-deprecated-copy -Wno-mismatched-tags -Wno-missing-field-initializers -Wno-overloaded-virtual -Wno-unsupported-friend -Wno-unused-parameter -ffile-prefix-map=/home/kefu/dev/scylladb/build=. -march=x86-64-v3 -mpclmul -Xclang -fexperimental-assignment-tracking=disabled -Werror=unused-result -fstack-clash-protection -fsanitize=address -fsanitize=undefined -MD -MT CMakeFiles/scylla-main.dir/Debug/mutation_query.cc.o -MF CMakeFiles/scylla-main.dir/Debug/mutation_query.cc.o.d -o CMakeFiles/scylla-main.dir/Debug/mutation_query.cc.o -c /home/kefu/dev/scylladb/mutation_query.cc
In file included from /home/kefu/dev/scylladb/mutation_query.cc:12:
In file included from /home/kefu/dev/scylladb/schema/schema_registry.hh:17:
In file included from /home/kefu/dev/scylladb/replica/database.hh:11:
In file included from /home/kefu/dev/scylladb/locator/abstract_replication_strategy.hh:26:
/home/kefu/dev/scylladb/locator/tablets.hh:410:30: error: unexpected type name 'size_t': expected expression
410 | return boost::irange<size_t>(0, tablet_count()) | boost::adaptors::transformed([] (size_t i) {
| ^
/home/kefu/dev/scylladb/locator/tablets.hh:410:23: error: no member named 'irange' in namespace 'boost'
410 | return boost::irange<size_t>(0, tablet_count()) | boost::adaptors::transformed([] (size_t i) {
| ~~~~~~~^
/home/kefu/dev/scylladb/locator/tablets.hh:410:38: error: left operand of comma operator has no effect [-Werror,-Wunused-value]
410 | return boost::irange<size_t>(0, tablet_count()) | boost::adaptors::transformed([] (size_t i) {
| ^
In file included from /home/kefu/dev/scylladb/mutation_query.cc:12:
In file included from /home/kefu/dev/scylladb/schema/schema_registry.hh:17:
In file included from /home/kefu/dev/scylladb/replica/database.hh:37:
In file included from /home/kefu/dev/scylladb/db/snapshot-ctl.hh:20:
/home/kefu/dev/scylladb/tasks/task_manager.hh:403:54: error: no member named 'irange' in namespace 'boost'
403 | co_await coroutine::parallel_for_each(boost::irange(0u, smp::count), [&tm, id, &res, &func] (unsigned shard) -> future<> {
| ~~~~~~~^
4 errors generated.
```
so let's take the opportunity to switch from `boost::irange` to
`std::views::iota`.
in this change, we:
- switch from boost::irange to std::views::iota for better standard library compatibility
- retain boost::irange where step parameter is used, as std::views::iota doesn't support it
- this change partially modernizes our range usage while maintaining
- existing functionality
Signed-off-by: Kefu Chai <kefu.chai@scylladb.com>
Closesscylladb/scylladb#20924
It doesn't need it apart from a forward declaration.
Files that lost necessary includes are adjusted, and some users
of auth_version_t are redirected to the definition outside system_keyspace.
in 30e82a81, we add a contraint to the template parameter of
boost_test_print_type() to prevent it from being matched with
types which can be formatted with operator<<. but it failed to
work. we still have test failure reports like:
```
[Exception] - critical check ['s', 's', 't', '_', 'm', 'r', '.', 'i', 's', '_', 'e', 'n', 'd', '_', 'o', 'f', '_', 's', 't', 'r', 'e', 'a', 'm', '(', ')'] has failed
```
this is not what we expect. the reason is that we passed the template
parameters to the `has_left_shift` trait in the wrong order, see
https://live.boost.org/doc/libs/1_83_0/libs/type_traits/doc/html/boost_typetraits/reference/has_left_shift.html.
we should have passed the lhs of operator<< expression as first
parameter, and rhs the second.
so, in this change, we correct the type constraint by passing the
template parameter in the right order, now the error message looks
better, like:
```
test/boost/mutation_query_test.cc(110): error: in "test_partition_query_is_full": check !partition_slice_builder(*s) .with_range({}) .build() .is_full() has failed
```
it turns out boost::transformed_range<> is formattable with operator<<,
as it fulfills the constraints of `boost::has_left_shift<ostream, R>`,
but when printing it, the compiler fails when it tries to insert the
elements in the range to the output stream.
so, in order to workaround this issue, we add a specialization for
`boost::transformed_range<F, R`.
also, to improve the readability, we reimplement the `has_left_shift<>`
as a concept, so that it's obvious that we need to put both the output
stream as the first parameter.
Signed-off-by: Kefu Chai <kefu.chai@scylladb.com>
Closesscylladb/scylladb#20233
this change was created in the same spirit of 505900f18f. because
we are deprecating the operator<< for vector and unorderd_map in
Seastar, some tests do not compile anymore if we disable these
operators. so to be prepared for the change disabling them, let's
include test/lib/test_utils.hh for accessing the printer dedicated
for Boost.test. and also '#include <fmt/ranges.h>' when necessary,
because, in order to format the ranges using {fmt}, we need to
use fmt/ranges.h.
Refs #13245
Signed-off-by: Kefu Chai <kefu.chai@scylladb.com>
We have enabled the command line options without changing a
single line of code, we only had to replace old include
with scylla_test_case.hh.
Next step is to add x-log-compaction-groups options, which will
determine the number of compaction groups to be used by all
instantiations of replica::table.
Signed-off-by: Raphael S. Carvalho <raphaelsc@scylladb.com>
The CQL binary protocol introduced "unset" values in version 4
of the protocol. Unset values can be bound to variables, which
cause certain CQL fragments to be skipped. For example, the
fragment `SET a = :var` will not change the value of `a` if `:var`
is bound to an unset value.
Unsets, however, are very limited in where they can appear. They
can only appear at the top-level of an expression, and any computation
done with them is invalid. For example, `SET list_column = [3, :var]`
is invalid if `:var` is bound to unset.
This causes the code to be littered with checks for unset, and there
are plenty of tests dedicated to catching unsets. However, a simpler
way is possible - prevent the infiltration of unsets at the point of
entry (when evaluating a bind variable expression), and introduce
guards to check for the few cases where unsets are allowed.
This is what this long patch does. It performs the following:
(general)
1. unset is removed from the possible values of cql3::raw_value and
cql3::raw_value_view.
(external->cql3)
2. query_options is fortified with a vector of booleans,
unset_bind_variable_vector, where each boolean corresponds to a bind
variable index and is true when it is unset.
3. To avoid churn, two compatiblity structs are introduced:
cql3::raw_value{,_view}_vector_with_unset, which can be constructed
from a std::vector<raw_value{,_view/}>, which is what most callers
have. They can also be constructed with explicit unset vectors, for
the few cases they are needed.
(cql3->variables)
4. query_options::get_value_at() now throws if the requested bind variable
is unset. This replaces all the throwing checks in expression evaluation
and statement execution, which are removed.
5. A new query_options::is_unset() is added for the users that can tolerate
unset; though it is not used directly.
6. A new cql3::unset_operation_guard class guards against unsets. It accepts
an expression, and can be queried whether an unset is present. Two
conditions are checked: the expression must be a singleton bind
variable, and at runtime it must be bound to an unset value.
7. The modification_statement operations are split into two, via two
new subclasses of cql3::operation. cql3::operation_no_unset_support
ignores unsets completely. cql3::operation_skip_if_unset checks if
an operand is unset (luckily all operations have at most one operand that
tolerates unset) and applies unset_operation_guard to it.
8. The various sites that accept expressions or operations are modified
to check for should_skip_operation(). This are the loops around
operations in update_statement and delete_statement, and the checks
for unset in attributes (LIMIT and PER PARTITION LIMIT)
(tests)
9. Many unset tests are removed. It's now impossible to enter an
unset value into the expression evaluation machinery (there's
just no unset value), so it's impossible to test for it.
10. Other unset tests now have to be invoked via bind variables,
since there's no way to create an unset cql3::expr::constant.
11. Many tests have their exception message match strings relaxed.
Since unsets are now checked very early, we don't know the context
where they happen. It would be possible to reintroduce it (by adding
a format string parameter to cql3::unset_operation_guard), but it
seems not to be worth the effort. Usage of unsets is rare, and it is
explicit (at least with the Python driver, an unset cannot be
introduced by ommission).
I tried as an alternative to wrap cql3::raw_value{,_view} (that doesn't
recognize unsets) with cql3::maybe_unset_value (that does), but that
caused huge amounts of churn, so I abandoned that in favor of the
current approach.
Closes#12517
Instead of lengthy blurbs, switch to single-line, machine-readable
standardized (https://spdx.dev) license identifiers. The Linux kernel
switched long ago, so there is strong precedent.
Three cases are handled: AGPL-only, Apache-only, and dual licensed.
For the latter case, I chose (AGPL-3.0-or-later and Apache-2.0),
reasoning that our changes are extensive enough to apply our license.
The changes we applied mechanically with a script, except to
licenses/README.md.
Closes#9937
It's only used in a single test, and there is no reason why it should ever
be used anywhere else. So let's remove it from the public header and move
it to that test.
We want to change the internals of cql3::raw_value{_view}.
However, users of cql3::raw_value and cql3::raw_value_view often
use them by extracting the internal representation, which will be different
after the planned change.
This commit prepares us for the change by making all accesses to the value
inside cql3::raw_value(_view) be done through helper methods which don't expose
the internal representation publicly.
After this commit we are free to change the internal representation of
raw_value_{view} without messing up their users.
1. Move tests to test (using singular seems to be a convention
in the rest of the code base)
2. Move boost tests to test/boost, other
(non-boost) unit tests to test/unit, tests which are
expected to be run manually to test/manual.
Update configure.py and test.py with new paths to tests.
