When failed-to-be-cloned node cleans itself it must also clear
all its child nodes. Plain destroy() doesn't do it, it only
frees the provided node.
fixes: #9248
Signed-off-by: Pavel Emelyanov <xemul@scylladb.com>
(cherry picked from commit d1a1a2dac2)
lw_shared_ptr must not be copied on a foreign shard.
Copying the vector on shard 0 tries increases the reference count of
lw_shared_ptr<sstable> elements that were created on other shards,
as seen in https://github.com/scylladb/scylla/issues/9278.
Fixes#9278
DTest: migration_test.py:TestLoadAndStream_with_3_0_md.load_and_stream_increase_cluster_test(debug)
Signed-off-by: Benny Halevy <bhalevy@scylladb.com>
Message-Id: <20210902084313.2003328-1-bhalevy@scylladb.com>
(cherry picked from commit 33f579f783)
Whenever a node_head_ptr is assigned to nil_root, the _backref inside it is
overwritten. But since nil_root is shared between shards, this causes severe
cache line bouncing. (It was observed to reduce the total write throughput
of Scylla by 90% on a large NUMA machine).
This backreference is never read anyway, so fix this bug by not writing it.
Fixes#9252Closes#9246
(cherry picked from commit 126baa7850)
Introduce `raft` experimental option.
Adjust the tests accordingly to accomodate the new option.
It's not enabled by default when providing
`--experimental=true` config option and should be
requested explicitly via `--experimental-options=raft`
config option.
Hide the code related to `raft_group_registry` behind
the switch. The service object is still constructed
but no initialization is performed (`init()` is not
called) if the flag is not set.
Later, other raft-related things, such as raft schema
changes, will also use this flag.
Also, don't introduce a corresponding gossiper feature
just yet, because again, it should be done after the
raft schema changes API contract is stabilized.
This will be done in a separate series, probably related to
implementing the feature itself.
Tests: unit(dev)
Ref #9239.
Signed-off-by: Pavel Solodovnikov <pa.solodovnikov@scylladb.com>
Message-Id: <20210823121956.167682-1-pa.solodovnikov@scylladb.com>
(cherry picked from commit 22794efc22)
Refs #9053
Flips default for commitlog disk footprint hard limit enforcement to off due
to observed latency stalls with stress runs. Instead adds an optional flag
"commitlog_use_hard_size_limit" which can be turned on to in fact do enforce it.
Sort of tape and string fix until we can properly tweak the balance between
cl & sstable flush rate.
Closes#9195
(cherry picked from commit 3633c077be)
On some environment /sys/devices/system/cpu/cpufreq/policy0/scaling_governor
does not exist even it supported CPU scaling.
Instead, /sys/devices/system/cpu/cpu0/cpufreq/scaling_governor is
avaliable on both environment, so we should switch to it.
Fixes#9191Closes#9193
(cherry picked from commit e5bb88b69a)
The reader is used by load and stream to read sstables from the upload
directory which are not guaranteed to belong to the local shard.
Using the make_range_sstable_reader instead of
make_local_shard_sstable_reader.
Tests:
backup_restore_tests.py:TestBackupRestore.load_and_stream_using_snapshot_test
backup_restore_tests.py:TestBackupRestore.load_and_stream_to_new_cluster_2_test
backup_restore_tests.py:TestBackupRestore.load_and_stream_to_new_cluster_1_test
migration_test.py:TestLoadAndStream.load_and_stream_asymmetric_cluster_test
migration_test.py:TestLoadAndStream.load_and_stream_decrease_cluster_test
migration_test.py:TestLoadAndStream.load_and_stream_frozen_pk_test
migration_test.py:TestLoadAndStream.load_and_stream_increase_cluster_test
migration_test.py:TestLoadAndStream.load_and_stream_primary_replica_only_test
Fixes#9173Closes#9185
(cherry picked from commit 040b626235)
Compaction manager can start tons of compaction of fully expired sstable in
parallel, which may consume a significant amount of resources.
This problem is caused by weight being released too early in compaction, after
data is all compacted but before table is called to update its state, like
replacing sstables and so on.
Fully expired sstables aren't actually compacted, so the following can happen:
- compaction 1 starts for expired sst A with weight W, but there's nothing to
be compacted, so weight W is released, then calls table to update state.
- compaction 2 starts for expired sst B with weight W, but there's nothing to
be compacted, so weight W is released, then calls table to update state.
- compaction 3 starts for expired sst C with weight W, but there's nothing to
be compacted, so weight W is released, then calls table to update state.
- compaction 1 is done updating table state, so it finally completes and
releases all the resources.
- compaction 2 is done updating table state, so it finally completes and
releases all the resources.
- compaction 3 is done updating table state, so it finally completes and
releases all the resources.
This happens because, with expired sstable, compaction will release weight
faster than it will update table state, as there's nothing to be compacted.
With my reproducer, it's very easy to reach 50 parallel compactions on a single
shard, but that number can be easily worse depending on the amount of sstables
with fully expired data, across all tables. This high parallelism can happen
only with a couple of tables, if there are many time windows with expired data,
as they can be compacted in parallel.
Prior to 55a8b6e3c9, weight was released earlier in compaction, before
last sstable was sealed, but right now, there's no need to release weight
earlier. Weight can be released in a much simpler way, after the compaction is
actually done. So such compactions will be serialized from now on.
Fixes#8710.
Signed-off-by: Raphael S. Carvalho <raphaelsc@scylladb.com>
Message-Id: <20210527165443.165198-1-raphaelsc@scylladb.com>
[avi: drop now unneeded storage_service_for_tests]
(cherry picked from commit a7cdd846da)
Partition count is of a type size_t but we use std::plus<int>
to reduce values of partition count in various column families.
This patch changes the argument of std::plus to the right type.
Using std::plus<int> for size_t compiles but does not work as expected.
For example plus<int>(2147483648LL, 1LL) = -2147483647 while the code
would probably want 2147483649.
Fixes#9090
Signed-off-by: Piotr Jastrzebski <piotr@scylladb.com>
Closes#9074
(cherry picked from commit 90a607e844)
The recent commit 0ef0a4c78d added helpful
error messages in case an index cannot be created because the intended
name of its materialized view is already taken - but accidentally broke
the "CREATE INDEX IF NOT EXISTS" feature.
The checking code was correct, but in the wrong place: we need to first
check maybe the index already exists and "IF NOT EXISTS" was chosen -
and only do this new error checking if this is not the case.
This patch also includes a cql-pytest test for reproducing this bug.
The bug is also reproduced by the translated Cassandra unit tests
cassandra_tests/validation/entities/secondary_index_test.py::
testCreateAndDropIndex
and this is how I found this bug. After these patch, all these tests
pass.
Fixes#8717.
Signed-off-by: Nadav Har'El <nyh@scylladb.com>
Message-Id: <20210526143635.624398-1-nyh@scylladb.com>
(cherry picked from commit 97e827e3e1)
When an index is created without an explicit name, a default name
is chosen. However, there was no check if a table with conflicting
name already exists. The check is now in place and if any conflicts
are found, a new index name is chosen instead.
When an index is created *with* an explicit name and a conflicting
regular table is found, index creation should simply fail.
This series comes with a test.
Fixes#8620
Tests: unit(release)
Closes#8632
* github.com:scylladb/scylla:
cql-pytest: add regression tests for index creation
cql3: fail to create an index if there is a name conflict
database: check for conflicting table names for indexes
(cherry picked from commit cee4c075d2)
Refs #8418
Broadcast can (apparently) be an address not actually on machine, but
on the other side of NAT. Thus binding local side of outgoing
connection there will fail.
Bind instead to listen_address (or broadcast, if listen_to_broadcast),
this will require routing + NAT to make the connection looking
like from broadcast from node connected to, to allow the connection
(if using partial encryption).
Note: this is somewhat verified somewhat limitedly. I would suggest
verifying various multi rack/dc setups before relying on it.
Closes#8974
(cherry picked from commit b8b5f69111)
The repair parallelism is calculated by the number of memory allocated to
repair and memory usage per repair instance. Currently, it does not
consider memory bloat issues (e.g., issue #8640) which cause repair to
use more memory and cause std::bad_alloc.
Be more conservative when calculating the parallelism to avoid repair
using too much memory.
Fixes#8641Closes#8652
(cherry picked from commit b8749f51cb)
To avoid restart scylla-server.service unexpectedly, drop BindsTo=
from scylla-fstrim.timer.
Fixes#8921Closes#8973
(cherry picked from commit def81807aa)
Fixes#8952
In 5ebf5835b0 we added a segment
prune after flushing, to deal with deadlocks in shutdown.
This means that calls that issue sync/flush-like ops "for-all",
need to operate on a defensive copy of the list.
Closes#8980
(cherry picked from commit ce45ffdffb)
systemd unit name of scylla-node-exporter is
scylla-node-exporter.service, not node-exporter.service.
Fixes#8966Closes#8967
(cherry picked from commit f19ebe5709)
Listing /etc/systemd/system/*.mount as ghost file seems incorrect,
since user may want to keep using RAID volume / coredump directory after
uninstalling Scylla, or user may want to upgrade enterprise version.
Also, we mixed two types of files as ghost file, it should handle differently:
1. automatically generated by postinst scriptlet
2. generated by user invoked scylla_setup
The package should remove only 1, since 2 is generated by user decision.
However, just dropping .mount from %files section causes another
problem, rpm will remove these files during upgrade, instead of
uninstall (#8924).
To fix both problem, specify .mount files as "%ghost %config".
It will keep files both package upgrade and package remove.
See scylladb/scylla-enterprise#1780Closes#8810Closes#8924Closes#8959
(cherry picked from commit f71f9786c7)
Commit 5adb8e555c marked the ::feed_hash() and a visitor lambda of
digester::feed_hash() as noexcept. This was quite recklesl as the
appending_hash<>::operator()s called by ::feed_hash() are not all
marked noexcept. In particular, the appending_hash<row>() is not
such and seem to throw.
The original intent of the mentioned commit was to facilitate the
partition_hasher in repair/ code. The hasher itself had been removed
by the 0af7a22c21, so it no longer needs the feed_hash-s to be
noexcepts.
The fix is to inherit noexcept from the called hashers, but for the
digester::feed_hash part the noexcept is just removed until clang
compilation bug #50994 is fixed.
fixes: #8983
tests: unit(dev)
Signed-off-by: Pavel Emelyanov <xemul@scylladb.com>
Message-Id: <20210706153608.4299-1-xemul@scylladb.com>
(cherry picked from commit 63a2fed585)
With strict mode, it could happen that a sstable alone in level 0 is
selected for offstrategy compaction, which means that we could run
into an infinite reshape process.
This is fixed by respecting the offstrategy threshold. Unit test is
added.
Fixes#8573.
Signed-off-by: Raphael S. Carvalho <raphaelsc@scylladb.com>
Message-Id: <20210506181324.49636-1-raphaelsc@scylladb.com>
(cherry picked from commit 8480839932)
Wrong comparison operator is used when checking for overlapping. It
would miss overlapping when last key of a sstable is equal to the first
key of another sstable that comes next in the set, which is sorted by
first key.
Fixes#8531.
Signed-off-by: Raphael S. Carvalho <raphaelsc@scylladb.com>
(cherry picked from commit 39ecddbd34)
Fixes#8270
If we have an allocation pattern where we leave large parts of segments "wasted" (typically because the segment has empty space, but cannot hold the mutation being added), we can have a disk usage that is below threshold, yet still get a disk footprint that is over limit causing new segment allocation to stall.
We need to take a few things into account:
1.) Need to include wasted space in the threshold check. Whether or not disk is actually used does not matter here.
2.) If we stall a segment alloc, we should just flush immediately. No point in waiting for the timer task.
3.) Need to adjust the thresholds a bit. Depending on sizes, we should probably consider start flushing once we've used up space enough to be in the last available segment, so a new one is hopefully available by the time we hit the limit.
4.) (v2) Must ensure discard/delete routines are executed. Because we can race with background disk syncs, we may need to
issue segment prunes from end_flush() so we wake up actual file deletion/recycling
5.) (v2) Shutdown must ensure discard/delete is run after we've disabled background task etc, otherwise we might fail waking up replenish and get stuck in gate
6.) (v2) Recycling or deleting segments must be consistent, regardless of shutdown. For same reason as above.
7.) (v3) Signal recycle/delete queues/promise on shutdown (with recognized marker) to handle edge case where we only have a single (allocating) segment in the list, and cannot wake up replenisher in any more civilized way.
Also fix edge case (for tests), when we have too few segment to have an active one (i.e. need flush everything).
New attempt at this, should fix intermittent shutdown deadlocks in commitlog_test.
Closes#8764
* github.com:scylladb/scylla:
commitlog_test: Add test case for usage/disk size threshold mismatch
commitlog_test: Improve test assertion
commitlog: Add waitable future for background sync/flush
commitlog: abort queues on shutdown
commitlog: break out "abort" calls into member functions
commitlog: Do explicit discard+delete in shutdown
commitlog: Recycle or not should not depend on shutdown state
commitlog: Issue discard_unused_segments on segment::flush end IFF deletable
commitlog: Flush all segments if we only have one.
commitlog: Always force flush if segment allocation is waiting
commitlog: Include segment wasted (slack) size in footprint check
commitlog: Adjust (lower) usage threshold
(cherry picked from commit 14252c8b71)
Shutdown must never fail, otherwise it may cause hangs
as seen in https://github.com/scylladb/scylla/issues/8577.
This change wraps the file created in `allocate_segment_ex` in `make_checked_file` so that scylla will abort when failing to write to the commitlog files.
In case other errors are seen during shutdown, just log them and continue with shutting down to prevent scylla from hanging.
Fixes#8577
Test: unit(dev)
Signed-off-by: Benny Halevy <bhalevy@scylladb.com>
Closes#8578
* github.com:scylladb/scylla:
commitlog: segment_manager::shutdown: abort on errors
commitlog: allocate_segment_ex: make_checked_file
(cherry picked from commit 48ff641f67)
This was triggered by the test_total_space_limit_of_commitlog dtest.
When it passes a very large commitlog_segment_size_in_mb (1/6th of the
free memory size, in mb), segment_manager constructor limits max_size
to std::numeric_limits<position_type>::max() which is 0xffffffff.
This causes allocate_segment_ex to loop forever when writing the segment
file since `dma_write` returns 0 when the count is unaligned (seen 4095).
The fix here is to select a sligtly small maxsize that is aligned
down to a multiple of 1MB.
Signed-off-by: Benny Halevy <bhalevy@scylladb.com>
Message-Id: <20210407121059.277912-1-bhalevy@scylladb.com>
(cherry picked from commit 705f9c4f79)
Backport of 6726fe79b6.
The code was susceptible to use-after-move if both local
and remote updates were going to be sent.
The whole routine for sending view updates is now rewritten
to avoid use-after-move.
Fixes#8830
Tests: unit(release),
dtest(secondary_indexes_test.py:TestSecondaryIndexes.test_remove_node_during_index_build)
Closes#8834
* backport-6726fe7:
view: fix use-after-move when handling view update failures
db,view: explicitly move the mutation to its helper function
db,view: pass base token by value to mutate_MV
The code was susceptible to use-after-move if both local
and remote updates were going to be sent.
The whole routine for sending view updates is now rewritten
to avoid use-after-move.
Refs #8830
Tests: unit(release),
dtest(secondary_indexes_test.py:TestSecondaryIndexes.test_remove_node_during_index_build)
The `apply_to_remote_endpoints` helper function used to take
its `mut` parameter by reference, but then moved the value from it,
which is confusing and prone to errors. Since the value is moved-from,
let's pass it to the helper function as rvalue ref explicitly.
The base token is passed cross-continuations, so the current way
of passing it by const reference probably only works because the token
copying is cheap enough to optimize the reference out.
Fix by explicitly taking the token by value.
This backport fixes the follow issue:
Cassandra stress fails to achieve consistency during replace node operation #8013
without the NODE_OPS_CMD infrastructure.
The commit c82250e0cf (gossip: Allow deferring advertise of local node to be up) which fixes for
During replace node operation - replacing node is used to respond to read queries #7312
is already present in 4.5 branch.
Closes#8703
* github.com:scylladb/scylla:
storage_service: Delay update pending ranges for replacing node
gossip: Add helper to wait for a node to be up
In issue #5021 we noticed that the equality check in Alternator's condition
expressions needs to handle sets differently - we need to compare the set's
elements ignoring their order. But the implementation we added to fix that
issue was only correct when the entire attribute was a set... In the
general case, an attribute can be a nested document, with only some
inner set. The equality-checking function needs to tranverse this nested
document, and compare the sets inside it as appropriate. This is what
we do in this patch.
This patch also adds a new test comparing equality of a nested document with
some inner sets. This test passes on DynamoDB, failed on Alternator before
this patch, and passes with this patch.
Refs #5021Fixes#8514
Signed-off-by: Nadav Har'El <nyh@scylladb.com>
Message-Id: <20210419184840.471858-1-nyh@scylladb.com>
(cherry picked from commit dae7528fe5)
In issue #5021 we noted that Alternator's equality operator needs to be
fixed for the case of comparing two sets, because the equality check needs
to take into account the possibility of different element order.
Unfortunately, we fixed only the equality check operator, but forgot there
is also an inequality operator!
So in this patch we fix the inequality operator, and also add a test for
it that was previously missing.
The implementation of the inequality operator is trivial - it's just the
negation of the equality test. Our pre-existing tests verify that this is
the correct implementation (e.g., if attribute x doesn't exist, then "x = 3"
is false but "x <> 3" is true).
Refs #5021Fixes#8513
Signed-off-by: Nadav Har'El <nyh@scylladb.com>
Message-Id: <20210419141450.464968-1-nyh@scylladb.com>
(cherry picked from commit 50f3201ee2)
When a condition expression (ConditionExpression, FilterExpression, etc.)
checks for equality of two item attributes, i.e., "x = y", and when one of
these attributes was missing we correctly returned false.
However, we also need to return false when *both* attributes are missing in
the item, because this is what DynamoDB does in this case. In other words
an unset attribute is never equal to anything - not even to another unset
attribute. This was not happening before this patch:
When x and y were both missing attributes, Alternator incorrectly returned
true for "x = y", and this patch fixes this case. It also fixes "x <> y"
which should to be true when both x and y are unset (but was false
before this patch).
The other comparison operators - <, <=, >, >=, BETWEEN, were all
implemented correctly even before this patch.
This patch also includes tests for all the two-unset-attribute cases of
all the operators listed above. As usual, we check that these tests pass
on both DynamoDB and Alternator to confirm our new behavior is the correct
one - before this patch, two of the new tests failed on Alternator and
passed on DynamoDB.
Fixes#8511
Signed-off-by: Nadav Har'El <nyh@scylladb.com>
Message-Id: <20210419123911.462579-1-nyh@scylladb.com>
(cherry picked from commit 46448b0983)
This is a follow up change to #8512.
Let's add aio conf file during scylla installation process and make sure
we also remove this file when uninstall Scylla
As per Avi Kivity's suggestion, let's set aio value as static
configuration, and make it large enough to work with 500 cpus.
Closes#8650
Refs: #8713
(cherry picked from commit dd453ffe6a)
On severl instance types in AWS and Azure, we get the following failure
during scylla_io_setup process:
```
ERROR 2021-04-14 07:50:35,666 [shard 5] seastar - Could not setup Async
I/O: Resource temporarily unavailable. The most common cause is not
enough request capacity in /proc/sys/fs/aio-max-nr. Try increasing that
number or reducing the amount of logical CPUs available for your
application
```
We have scylla_prepare:configure_io_slots() running before the
scylla-server.service start, but the scylla_io_setup is taking place
before
1) Let's move configure_io_slots() to scylla_util.py since both
scylla_io_setup and scylla_prepare are import functions from it
2) cleanup scylla_prepare since we don't need the same function twice
3) Let's use configure_io_slots() during scylla_io_setup to avoid such
failure
Fixes: #8587Closes#8512
Refs: #8713
(cherry picked from commit 588a065304)
In commit c82250e0cf (gossip: Allow deferring
advertise of local node to be up), the replacing node is changed to postpone
the responding of gossip echo message to avoid other nodes sending read
requests to the replacing node. It works as following:
1) replacing node does not respond echo message to avoid other nodes to
mark replacing node as alive
2) replacing node advertises hibernate state so other nodes knows
replacing node is replacing
3) replacing node responds echo message so other nodes can mark
replacing node as alive
This is problematic because after step 2, the existing nodes in the
cluster will start to send writes to the replacing node, but at this
time it is possible that existing nodes haven't marked the replacing
node as alive, thus failing the write request unnecessarily.
For instance, we saw the following errors in issue #8013 (Cassandra
stress fails to achieve consistency when only one of the nodes is down)
```
scylla:
[shard 1] consistency - Live nodes 2 do not satisfy ConsistencyLevel (2
required, 1 pending, live_endpoints={127.0.0.2, 127.0.0.1},
pending_endpoints={127.0.0.3}) [shard 0] gossip - Fail to send
EchoMessage to 127.0.0.3: std::runtime_error (Not ready to respond
gossip echo message)
c-s:
java.io.IOException: Operation x10 on key(s) [4c4f4d37324c35304c30]:
Error executing: (UnavailableException): Not enough replicas available
for query at consistency QUORUM (2 required but only 1 alive
```
To solve this problem for older releases without the patch "repair:
Switch to use NODE_OPS_CMD for replace operation", a minimum fix is
implemented in this patch. Once existing nodes learn the replacing node
is in HIBERNATE state, they add the replacing as replacing, but only add
the replacing to the pending list only after the replacing node is
marked as alive.
With this patch, when the existing nodes start to write to the replacing
node, the replacing node is already alive.
Tests: replace_address_test.py:TestReplaceAddress.replace_node_same_ip_test + manual test
Fixes: #8013Closes#8614
(cherry picked from commit e4872a78b5)
Currently, var-lib-scylla.mount may fails because it can start before
MDRAID volume initialized.
We may able to add "After=dev-disk-by\x2duuid-<uuid>.device" to wait for
device become available, but systemd manual says it automatically
configure dependency for mount unit when we specify filesystem path by
"absolute path of a device node".
So we need to replace What=UUID=<uuid> to What=/dev/disk/by-uuid/<uuid>.
Fixes#8279Closes#8681
(cherry picked from commit 3d307919c3)
Currently, unified installer does not apply correct file security context
while copying files, it causes permission error on scylla-server.service.
We should apply default file security context while copying files, using
'-Z' option on /usr/bin/install.
Also, because install -Z requires normalized path to apply correct security
context, use 'realpath -m <PATH>' on path variables on the script.
Fixes#8589Closes#8602
(cherry picked from commit 60c0b37a4c)
Since we have added scylla-node-exporter, we needed to do 'install -d'
for systemd directory and sysconfig directory before copying files.
Fixes#8663Closes#8664
(cherry picked from commit 6faa8b97ec)
When recreating the paging state from an indexed query,
a bunch of panic checks were introduced to make sure that
the code is correct. However, one of the checks is too eager -
namely, it throws an error if the base column type is not equal
to the view column type. It usually works correctly, unless the
base column type is a clustering key with DESC clustering order,
in which case the type is actually "reversed". From the point of view
of the paging state generation it's not important, because both
types deserialize in the same way, so the check should be less
strict and allow the base type to be reversed.
Tests: unit(release), along with the additional test case
introduced in this series; the test also passes
on Cassandra
Fixes#8666Closes#8667
* github.com:scylladb/scylla:
test: add a test case for paging with desc clustering order
cql3: relax a type check for index paging
(cherry picked from commit 593ad4de1e)
