Fix an issue in the voter calculator where existing voters were not
retained across data centers and racks in certain scenarios. This
occurred when voters were distributed across more data centers and racks
than the maximum allowed number of voters.
Previously, the prioritization logic for data centers and racks did not
consider the number of existing assigned voters. It only prioritized
nodes within a single data center or rack, which could result in
unnecessary reassignment of voters.
Improved the prioritization logic to account for the number of existing
voters in each data center and rack.
This change ensures a more stable voter distribution and reduces
unnecessary voter reassignments.
Fixes: scylladb/scylladb#23950
Refactor the limited voters calculator to use a priority queue for
sorting nodes by their priorities. This change simplifies the voter
selection logic and makes it more extensible for future enhancements,
such as supporting more complex priority calculations.
The priority value is determined based on the node's existing status,
including whether it is alive, a voter, or any further criteria.
The output parameter cannot be `null`. Previously, a pointer was used to
make it explicit that the parameter is an output parameter being
modified. However, this is unnecessary, as references are more
appropriate for parameters that cannot be `null`.
Switching to a reference improves code readability and ensures the
parameter's non-null constraint is enforced at the type level.
Refactor the group0 voter handler by introducing a helper lambda to
handle the common logic for adding a node. This eliminates unnecessary
code duplication.
This refactor does not introduce any functional changes but prepares
the codebase for easier future modifications.
Refactor the code to use a consistent pattern for creating the
datacenter info list and the rack info list.
Both now use a map of vectors, which improves efficiency by reducing
temporary conversions to maps/sets during node list processing.
Also ensure the node descriptor is passed by reference instead of by
copy, leveraging the guaranteed lifetime of the descriptors.
Interval map is very susceptible to quadratic space behavior when it's flooded with many entries overlapping all (or most of) intervals, since each such entry will have presence on all intervals it overlaps with.
A trigger we observed was memtable flush storm, which creates many small "L0" sstables that spans roughly the entire token range.
Since we cannot rely on insertion order, solution will be about storing sstables with such wide ranges in a vector (unleveled).
There should be no consequence for single-key reads, since upper layer applies an additional filtering based on token of key being queried.
And for range scans, there can be an increase in memory usage, but not significant because the sstables span an wide range and would have been selected in the combined reader if the range of scan overlaps with them.
Anyway, this is a protection against storm of memtable flushes and shouldn't be the common scenario.
It works both with tablets and vnodes, by adjusting the token range spanned by compaction group accordingly.
Fixes#23634.
We can backport this into 2024.2, 2025.1, but we should let this cook in master for 1 month or so.
Closesscylladb/scylladb#23806
* github.com:scylladb/scylladb:
test: Verify partitioned set store split and unsplit correctly
sstables: Fix quadratic space complexity in partitioned_sstable_set
compaction: Wire table_state into make_sstable_set()
compaction: Introduce token_range() to table_state
dht: Add overlap_ratio() for token range
This change resolves an issue where selecting a version from the multiversion dropdown on Markdown pages (e.g. https://docs.scylladb.com/manual/stable/alternator/getting-started.html) incorrectly redirected users to the main page instead of the corresponding versioned page.
The underlying cause was that the `multiversion` extension relies on `source_suffix` to identify available pages for URL mapping. Without this configuration, proper redirection fails for `.md` files.
This fix should be backported to `2025.1` to ensure correct behavior. Otherwise, the fix will only take effect in future releases.
Testing locally is non-trivial: clone the repository, apply the changes to each relevant branch, set `smv_remote_whitelist` to "", then run `make multiversionpreview`. Afterward, switch between versions in the dropdown to verify behavior. I've tested it locally, so the best next step is to merge and confirm that it works as expected in the live environment.
Closesscylladb/scylladb#23957
This dependency is already there, topology coordinator doesn't need
to use database reference to get to the features.
Previous patch of the same kind: b79137eaa4
Signed-off-by: Pavel Emelyanov <xemul@scylladb.com>
Closesscylladb/scylladb#23777
It had recently been patched to re-use the sstables::test class functionality (scylladb/scylladb#23697), now it can be put on some more strict diet.
Closesscylladb/scylladb#23815
* github.com:scylladb/scylladb:
test: Remove sstable_assertions::get_stats_metadata()
test: Add sstable_assertions::operator->()
The cqlpy and alternator test frameworks use a single Scylla node started
once for all tests to run on. In the distant past, we had a problem where
if one test caused Scylla to crash, the result was a confusing report of
hundreds of failed tests - all tests after the crash "failed" and it wasn't
easy to find which test really caused the crash.
Our old solution to this problem was to have an autouse fixture (called
cql_test_connection or dynamodb_test_connection) which tested the
connection at the end of each test, and if it detected Scylla has
crashed - it used pytest.exit() to report the error and have pytest
exit and therefore stop running any further tests (which would have
led to all of them testing).
This approach had two problems:
1. The pytest.exit() caused the entire cqlpy suite to report a failure,
but but not the individual test - the individual test might have
failed as well, but that isn't guaranteed and in any case this test's
output is missing the informative message that Scylla crashed during
the test. This was fine when for each cqlpy failure we had two separate
error logs in Jenkins - the specific failed function, and the failed
file - but when we recently got rid of the suplication by removing the
second one, we no longer see the "Scylla crashed" messages any more.
2. Exiting pytest will be the wrong thing to do if the same pytest
run could run tests from different test suites. We don't do this
today, but we plan to support this approach soon.
This patch fixes both problems by replacing the pytest.exit() call by
setting a "scylla_crashed" flag and using pytest.fail(). The pytest.fail()
causes the current test - the one which caused Scylla to crash - to be
reported as an "ERROR" and the "Scylla crashed" message will correctly
appear in this test's log. The flag will cause all other tests in the
same test suite to be skip()ed. But other tests in other directories,
depending on different fixtures, might continue to run normally.
Fixes#23287
Signed-off-by: Nadav Har'El <nyh@scylladb.com>
Closesscylladb/scylladb#23307
In ScyllaDB, schema modification operations use "optimistic locking":
A schema operation reads the current schema, decides what it wants to do
and prepares changes to the schema, and then attempts to commit those
changes - but only if the schema hasn't changed since the first read.
If the schema has already been changed by some other node - we need to
try again. In a loop.
In Alternator, there are six operations that perform schema modification:
CreateTable, DeleteTable, UpdateTable, TagResource, UntagResource and
UpdateTimeToLive. All of them were missing this loop. We knew about
this - and even had FIXME in all places. So all these operations,
when facing contention of concurrent schema modifications on different
nodes may fail one of these operations with an error like:
Internal server error: service::group0_concurrent_modification
(Failed to apply group 0 change due to concurrent modification).
This problem had very minor effect, if any, on real users because the
DynamoDB SDK automatically retries operations that fail with retryable
errors - like this "Internal server error" - and most likely the schema
operation will succeed upon retry. However, as shown in issue #13152
these failures were annoying in our CI, where tests - which disable
request retries - failed on these errors.
This patch fixes all six operations (the last three operations all
use one common function, db::modify_tags(), so are fixed by one
change) to add the missing loop.
The patch also includes reproducing tests for all these operations -
the new tests all fail before this patch, and pass with it.
These new tests are much more reliable reproducers than the dtests
we had that only sometimes - very rarely - reproduced the problem.
Moreover, the new tests reproduces the bug seperately for each of the
six operations, so if we forget to fix one of the six operations, one
of the tests would have continued to fail. Of course I checked this
during development.
The new tests are in the test/cluster framework, not test/alternator,
because this problem can only be reproduced in a multi-node cluster:
On a single node, it serializes its schema modifications on its own;
The collisions only happen when more than one node attempts schema
modifications at the same time.
Fixes#13152
Signed-off-by: Nadav Har'El <nyh@scylladb.com>
Closesscylladb/scylladb#23827
When an sstable is identified by sstable_directory as remote-unshared,
it will at some point be moved to the target shard. When it happens a
log-message appears:
sstable_directory - Moving 1 unshared SSTables to shard 1
Processing of tables by sstable_directory often happens in parallel, and
messages from sstable_directory are intermixed. Having a message like
above is not very informative, as it tells nothing about sstables that
are being moved.
Equip the message with ks:cf pair to make it more informative.
Signed-off-by: Pavel Emelyanov <xemul@scylladb.com>
Closesscylladb/scylladb#23912
When collecting sstables, the sstable_directory may sort the collected
descriptors into one of three buckets -- unshared local and remote, and
shared ones. Unshared local and shared sstables' paths are loggerd (with
trace level) while unshared remote is silently collected for further
processing. Add log message for that case too, there's enough data to
print the sstable path as well.
Signed-off-by: Pavel Emelyanov <xemul@scylladb.com>
Closesscylladb/scylladb#23913
The loading_cache has a periodic timer which acquires the
_timer_reads_gate. The stop() method first closes the gate and then
cancels the timer - this order is necessary because the timer is
re-armed under the gate. However, the timer callback does not check
whether the gate was closed but tries to acquire it, which might result
in unhandled exception which is logged with ERROR severity.
Fix the timer callback by acquiring access to the gate at the beginning
and gracefully returning if the gate is closed. Even though the gate
used to be entered in the middle of the callback, it does not make sense
to execute the timer's logic at all if the cache is being stopped.
Fixes: scylladb/scylladb#23951Closesscylladb/scylladb#23952
Currently, test_tablet_resize_revoked tries to trigger split revoke
by deleting some rows. This method isn't deterministic and so a test
is flaky.
Use error injection to trigger resize revoke.
Fixes: #22570.
Closesscylladb/scylladb#23966
There were CI runs in which the training happened as planned,
but it was too slow to fit within the timeout.
Raise the timeout to pacify the CI.
Fixesscylladb/scylladb#23964Closesscylladb/scylladb#23965
Interval map is very susceptible to quadratic space behavior when
it's flooded with many entries overlapping all (or most of)
intervals, since each such entry will have presence on all
intervals it overlaps with.
A trigger we observed was memtable flush storm, which creates many
small "L0" sstables that spans roughly the entire token range.
Since we cannot rely on insertion order, solution will be about
storing sstables with such wide ranges in a vector (unleveled).
There should be no consequence for single-key reads, since upper
layer applies an additional filtering based on token of key being
queried.
And for range scans, there can be an increase in memory usage,
but not significant because the sstables span an wide range and
would have been selected in the combined reader if the range of
scan overlaps with them.
Anyway, this is a protection against storm of memtable flushes
and shouldn't be the common scenario.
It works both with tablets and vnodes, by adjusting the token
range spanned by compaction group accordingly.
Fixes#23634.
Signed-off-by: Raphael S. Carvalho <raphaelsc@scylladb.com>
This provides a way for compaction layer to know compaction group's
token range. It will be important for sstable set impl to know
the token range of underlying group.
Signed-off-by: Raphael S. Carvalho <raphaelsc@scylladb.com>
In case when dht::boot_strapper::get_boostrap_tokens fail to parse the
tokens, the topology coordinator handles the exception and schedules a
rollback. However, the current code tries to continue with the topology
coordinator logic even if an exception occurs, leaving boostrap_tokens
empty. This does not make sense and can actually cause issues,
specifically in prepare_and_broadcast_cdc_generation_data which
implicitly expect that the bootstrap_tokens of the first node in the
cluster will not be empty.
Fix this by adding the missing break.
Fixes: scylladb/scylladb#23897
From the code inspection alone it looks like 2025.1 and 6.2 have this problem, so marking for backport to both of them.
Closesscylladb/scylladb#23914
* https://github.com/scylladb/scylladb:
test: cluster: add test_bad_initial_token
topology coordinator: do not proceed further on invalid boostrap tokens
cdc: add sanity check for generating an empty generation
Check whether a node is alive before making an rpc that gathers children
infos from the whole cluster in virtual_task::impl::get_children.
Fixes: https://github.com/scylladb/scylladb/issues/22514.
Needs backport to 2025.1 and 6.2 as they contain the bug.
Closesscylladb/scylladb#23787
* github.com:scylladb/scylladb:
test: add test for getting tasks children
tasks: check whether a node is alive before rpc
Currently, the base_info may or may not be set in view schemas.
Even when it's set, it may be modified. This necessitates extra
checks when handling view schemas, as we'll as potentially causing
errors when we forget to set it at some point.
Instead, we want to make the base info an immutable member of view
schemas (inside view_info). To achieve this, in this series we remove
all base_info members that can change due to a base schema update,
and we calculate the remaining values during view update generation,
using the most up-to-date base schema version.
To calculate the values that depend on the base schema version, we
need to iterate over the view primary key and find the corresponding
columns, which adds extra overhead for each batch of view updates.
However, this overhead should be relatively small, as when creating
a view update, we need to prepare each of its columns anyway. And
if we need to read the old value of the base row, the relative
overhead is even lower.
After this change, the base info in view schemas stays the same
for all base schema updates, so we'll no longer get issues with
base_info being incompatible with a base schema version. Additionally,
it's a step towards making the schema objects immutable, which
we sometimes incorrectly assumed in the past (they're still not
completely immutable yet, as some other fields in view_info other
than base_info are initialized lazily and may depend on the base
schema version).
Fixes https://github.com/scylladb/scylladb/issues/9059
Fixes https://github.com/scylladb/scylladb/issues/21292
Fixes https://github.com/scylladb/scylladb/issues/22194
Fixes https://github.com/scylladb/scylladb/issues/22410Closesscylladb/scylladb#23337
* github.com:scylladb/scylladb:
test: remove flakiness from test_schema_is_recovered_after_dying
mv: add a test for dropping an index while it's building
base_info: remove the lw_shared_ptr variant
view_info: don't re-set base_info after construction
base_info: remove base_info snapshot semantics
base_info: remove base schema from the base_info
schema_registry: store base info instead of base schema for view entries
base_info: make members non-const
view_info: move the base info to a separate header
view_info: move computation of view pk columns not in base pk to view_updates
view_info: move base-dependent variables into base_info
view_info: set base info on construction
Attribute names are now checked against DynamoDB-compatible length
limits. When exceeded, Alternator emits exception identical or similar
to the DDB one. It might be worth noting that DDB emits more than a
single kind of an exception string for some exceptions. The tests'
catch clauses handle all the observed kinds of messages from DynamoDB.
The validation differentiates between key and non-key attributes and
applies the limit accordingly.
AWS DDB raises exceptions with somewhat different contents when the
get request contains ProjectionExpression, so this case needed separate
treatment to emit the corresponding exception string. The
length-validating function was declared and defined in
expressions.hh/.cc respectively, because that's where the relevant
parsing happens.
** Tests
The following tests were validated when handling this issue:
test_limit_attribute_length_nonkey_good,
test_limit_attribute_length_nonkey_bad,
test_limit_attribute_length_key_good,
test_limit_attribute_length_key_bad,
test_limit_attribute_length_gsi_lsi_good,
test_limit_attribute_length_gsi_lsi_bad,
test_limit_attribute_length_gsi_lsi_projection_bad.
Some of the tests were expanded into being more granular. Namely, there
is a new test function
`test_limit_attribute_length_key_bad_incoherent_names`
which groups tests with too long attribute names in the case of
incorrect (incoherent) user requests.
Similarily, there is a new test function
`test_limit_attribute_length_gsi_lsi_bad_incoherent_names`
All the tests cover now each combination of the key/keys being too long.
Both the new fuctions contain tests that verify that ScyllaDB throws
length-related exceptions (instead of the coherency-related), similar
to what DynamoDB does.
The new test test_limit_gsiu_key_len_bad covers the case of too long
attribute name inside GlobalSecondaryIndexUpdates.
The new test test_limit_gsiu_key_len_bad_incoherent_names covers the
case of incorrect (incoherent) user requests containing too long
attribute names and GlobalSecondaryIndexUpdates.
test_limit_attribute_length_key_bad was found to have contaned an
illegal KeySchema structure.
Some of the tests were corrected their match clause.
All the tests are stripped of the xfail flag except
test_limit_attribute_length_key_bad, which has it changed since it
still fails due to Projection in GSI and LIS not implemented in Alternator.
The xfail now points to #5036.
Fixesscylladb/scylladb#9169Closesscylladb/scylladb#23097
This test shuts down a node and then replaces it with another one while
continuously writing to the cluster. The test has been observed to take
a lot of time in debug mode and time out on the replace operation.
Replace takes very long because rebuilding tablets on the new node is
very slow, and the slowest part is memtable flush which happens at the
beginning of streaming. The slowness seems to be specific to the debug
mode.
Turn off the test in debug mode to deflake the CI. As a follow-up, the
test is planned to be reworked into an quicker error injection test so
that the code path tested by this test will be again exercised in debug
unit tests (scylladb/scylladb#23898)
Fixes: scylladb/scylladb#20316Closesscylladb/scylladb#23900
In case when dht::boot_strapper::get_boostrap_tokens fail to parse the
tokens, the topology coordinator handles the exception and schedules a
rollback. However, the current code tries to continue with the topology
coordinator logic even if an exception occurs, leaving boostrap_tokens
empty. This does not make sense and can actually cause issues,
specifically in prepare_and_broadcast_cdc_generation_data which
implicitly expect that the bootstrap_tokens of the first node in the
cluster will not be empty.
Fix this by adding the missing break.
Fixes: scylladb/scylladb#23897
It doesn't make sense to create an empty CDC generation because it does
not make sense to have a cluster with no tokens. Add a sanity check to
cdc::make_new_generation_description which fails if somebody attempts to
do that (i.e. when the set of current tokens + optionally bootstrapping
node's tokens is empty).
The function does not work correctly if it is misused, as we saw in
scylladb/scylladb#23897. While the function should not be misused in the
first place, it's better to throw an exception rather than crash -
especially that this crash could happen on the topology coordinator.
Wait for cql after rolling restart in test_two_tablets_concurrent_repair_and_migration_repair_writer_level
to prevent failing queries.
Fixes: #23620.
Closesscylladb/scylladb#23796
Providing IP of an ignored node during removenode made the test flaky.
It could happen that the address map contained mappings of two
nodes with the same IP:
1. the node being ignored,
2. the node that expectedly failed replacing earlier in the test.
So, `address_map::find_by_addr()` called in `find_raft_nodes_from_hoeps`
could return the host ID of the second node instead of the first node
and cause removenode to fail.
We fix flakiness in this patch by providing the host ID of the ignored
node instead of its IP. We would have to do it anyway sooner or later
because providing IP is deprecated.
The bug in `find_raft_nodes_from_hoeps` is tracked by
scylladb/scylladb#23846.
The test became flaky because of f0af3f261e.
That patch is not present in 2025.1, so the test isn't flaky outside
master, and hence there is no reason to backport this patch.
Fixesscylladb/scylladb#23499Closesscylladb/scylladb#23863
Currently, flush throws no_such_column_family if a table is dropped. Skip the flush of dropped table instead.
Fixes: #16095.
Needs backport to 2025.1 and 6.2 as they contain the bug
Closesscylladb/scylladb#23876
* github.com:scylladb/scylladb:
test: test table drop during flush
replica: skip flush of dropped table
Due to the changes in creating schemas with base info the
test_schema_is_recovered_after_dying seems to be flaky when checking
that the schema is actually lost after 'grace_period'. We don't
actually guarantee that the the schema will be lost at that exact
moment so there's no reason to test this. To remove the flakiness,
we remove the check and the related sleep, which should also slightly
improve the speed of this test.
Dropping an index is a schema change of its base table and
a schema drop of the index's materialized view. This combination
of schema changes used to cause issues during view building, because
when a view schema was dropped, it wasn't getting updated with the
new version of the base schema, and while the view building was
in progress, we would update the base schema for the base table
mutation reader and try generating updates with a view schema that
wasn't compatible with the base schema, failing on an `on_internal_error`.
In this patch we add a test for this scenario. We create an index,
halt its view building process using an injection, and drop it.
If no errors are thrown, the test succeeds.
The test was failing before https://github.com/scylladb/scylladb/pull/23337
and is passing afterwards.
In the previous commits we made sure that the base info is not dependent
on the base schema version, and the info dependent on the base schema
version is calculated when it's needed. In this patch we remove the
unnecessary re-setting of the base_info.
The set_base_info method isn't removed completely, because it also has
a secondary function - zeroing the view_info fields other than base_info.
Because of this, in this patch we rename it accordingly and limit its
use to the updates caused by a base schema change.
The base info in view schemas no longer changes on base schema
updates, so saving the base info with a view schema from a specific
point in time doesn't provide any additional benefits.
In this patch we remove the code using the base_and_view snapshots
as it's no longer useful.
The base info now only contains values which are not reliant on the
base schema version. We remove the the base schema from the base info
to make it immutable regardless of base schema version, at the point
of this patch it's also not needed anywhere - the new base info can
replace the base schema in most places, and in the few (view_updates)
where we need it, we pull the most recent base schema version from
the database.
After this change, the base info no longer changes in a view schema
after creation, so we'll no longer get errors when we try generating
view updates with a base_info that's incompatible with a specific
base schema version.
Fixes#9059Fixes#21292Fixes#22410
In the following patch we plan to remove the base schema from the base_info
to make the base_info immutable. To do that, we first prepare the schema
registry for the change; we need to be able to create view schemas from
frozen schemas there and frozen schemas have no information about the base
table. Unless we do this change, after base schemas are removed from the
base info, we'll no longer be able to load a view schema to the schema registry
without looking up the base schema in the database.
This change also required some updates to schema building:
* we add a method for unfreezing a view schema with base info instead of
a base schema
* we make it possible to use schema_builder with a base info instead of
a base schema
* we add a method for creating a view schema from mutations with a base info
instead of a base schema
* we add a view_info constructor withat base info instead of a base schema
* we update the naming in schema_registry to reflect the usage of base info
instead of base schema
In the following patches we'll add the base info instead of the
base schema to various places (schema building, schema registry).
There, we'll sometimes need to update the base_info fields, which
we can't do with const members. There's also a place (global_schema_ptr)
where we won't be able to use the base_info_ptr (a shared pointer to the
base_info), so we can't just use the base_info_ptr everywhere instead.
In this patch we unmark these members as const.
In the following patches we'll remove the methods for changing the
base_info in the view schema, so it will remain effectively const.
In the following commits the base_depenedent_view_info will be needed
in many more places. To avoid including the whole db/view/view.hh
or forward declaring (where possible) the base info, we move it to
a separate header which can be included anywhere at almost no cost.
In preparation of making the base_info immutable, we want to get rid of
any base_dependent_view_info fields that can change when base schema
is updated.
The _base_regular_columns_in_view_pk and _base_static_columns_in_view_pk
base column_ids of corresponding base columns and they can change
(decrease) when an earlier column is dropped in the base table.
view_updates is the only location where these values are used and calculating
them is not expensive when comparing to the overall work done while performing
a view update - we iterate over all view primary key columns and look them up
in the base table.
With this in mind, we can just calculate them when creating a view_updates
object, instead of keeping them in the base_info. We do that in this patch.
The has_computed_column_depending_on_base_non_primary_key
and is_partition_key_permutation_of_base_partition_key variables
in the view_info depend on the base table so they should be in the
base_dependent_view_info instead of view_info.
Currently, the base_info may or may not be set in view schemas.
Even when it's set, it may be modified. This necessitates extra
checks when handling view schemas, as well as potentially causing
errors when we forget to set it at some point.
Instead, we want to make the base info an immutable member of view
schemas (inside view_info). The first step towards that is making
sure that all newly created schemas have the base info set.
We achieve that by requiring a base schema when constructing a view
schema. Unfortunately, this adds complexity each time we're making
a view schema - we need to get the base schema as well.
In most cases, the base schema is already available. The most
problematic scenario is when we create a schema from mutations:
- when parsing system tables we can get the schema from the
database, as regular tables are parsed before views
- when loading a view schema using the schema loader tool, we need
to load the base additionally to the view schema, effectively
doubling the work
- when pulling the schema from another node - in this case we can
only get the current version of the base schema from the local
database
Additionally, we need to consider the base schema version - when
we generate view updates the version of the base schema used for
reads should match the version of the base schema in view's base
info.
This is achieved by selecting the correct (old or new) schema in
`db::schema_tables::merge_tables_and_views` and using the stored
base schema in the schema_registry.
The query may fail also on a no_such_keyspace
exception, which generates the following cql error:
```
Error from server: code=2200 [Invalid query] message="Can\'t find a keyspace test_1745198244144_qoohq"
```
Extend the pytest.raises match expression to include
this error as well.
Fixes#23812
Signed-off-by: Benny Halevy <bhalevy@scylladb.com>
Closesscylladb/scylladb#23875
Refactor our CMake flag handling to make it more flexible and reduce
repetition:
- Rename update_cxx_flags() to update_build_flags() to better reflect
its expanded purpose
- Generate CMake variable names internally based on configuration type
instead of requiring callers to specify full variable names
- Follow CMake's standard naming conventions for configuration-specific
flags, see
https://cmake.org/cmake/help/latest/variable/CMAKE_LANG_FLAGS.html#variable:CMAKE_%3CLANG%3E_FLAGS
- Prepare groundwork for handling linker flags in addition to compiler
flags in future changes
Signed-off-by: Kefu Chai <kefu.chai@scylladb.com>
Closesscylladb/scylladb#23842
