Just copy the load_and_stream and primary_replica_only logic, this new
option is the same in this sense.
Throw if it's specified with the load_and_stream one.
Signed-off-by: Pavel Emelyanov <xemul@scylladb.com>
Add an API call which estimates the effectiveness of possible
compression config changes.
This can be used to make an informed decision about whether to
change the compression method, without actually recompressing
any SSTables.
Add an API call which will retrain the SSTable compression dictionary
for a given table.
Currently, it needs all nodes to be alive to succeed. We can relax this later.
Currently, the tablet repair scheduler repairs all replicas of a tablet.
It does not support hosts or DCs selection. It should be enough for most
cases. However, users might still want to limit the repair to certain
hosts or DCs in production. #21985 added the preparation work to add the
config options for the selection. This patch adds the hosts or DCs
selection support.
Fixes#22417
Set true to wait for the repair to complete. Set false to skip waiting
for the repair to complete. When the option is not provided, it defaults
to false.
It is useful for management tool that wants the api to be async.
Fixes#22418Closesscylladb/scylladb#22436
task_stats contains short info about a task. To get a list of task_stats
in the module, one needs to request /task_manager/list_module_tasks/{module}.
To make identification and navigation between tasks easier, extend
task_stats to contain shard, start_time, and end_time.
Closesscylladb/scylladb#22351
Currently, when the status of a task is queried and the task is already finished,
it gets unregistered. Getting the status shouldn't be a one-time operation.
Stop removing the task after its status is queried. Adjust tests not to rely
on this behavior. Add task_manager/drain API and nodetool tasks drain
command to remove finished tasks in the module.
Fixes: https://github.com/scylladb/scylladb/issues/21388.
It's a fix to task_manager API, should be backported to all branches
Closesscylladb/scylladb#22310
* github.com:scylladb/scylladb:
api: task_manager: do not unregister tasks on get_status
api: task_manager: add /task_manager/drain
In the following patches, get_status won't be unregistering finished
tasks. However, tests need a functionality to drop a task, so that
they could manipulate only with the tasks for operations that were
invoked by these tests.
Add /task_manager/drain/{module} to unregister all finished tasks
from the module. Add respective nodetool command.
Previously, during backup, SSTable components are preserved in the
snapshot directory even after being uploaded. This leads to redundant
uploads in case of failed backups or restarts, wasting time and
resources (S3 API calls).
This change
- adds an optional query parameter named "move_files" to
"/storage_service/backup" API. if it is set to "true", SSTable
components are removed once they are backed up to object storage.
- conditionally removes SSTable components from the snapshot directory once
they are successfully uploaded to the target location. This prevents
re-uploading the same files and reduces disk usage.
This change only "Refs" #20655, because, we can move further optimize
the backup process, consider:
- Sending HEAD requests to S3 to check for existing files before uploading.
- Implementing support for resuming partially uploaded files.
Fixes#21799
Refs #20655
Signed-off-by: Kefu Chai <kefu.chai@scylladb.com>
In this change, tablet_virtual_task starts supporting tablet
resize (i.e. split and merge).
Users can see running resize tasks - finished tasks are not
presented with the task manager API.
A new task state "suspended" is added. If a resize was revoked,
it will appear to users as suspended. We assume that the resize was revoked
when the tablet number didn't change.
Fixes: #21366.
Fixes: #21367.
No backport, new feature
Closesscylladb/scylladb#21891
* github.com:scylladb/scylladb:
test: boost: check resize_task_info in tablet_test.cc
test: add tests to check revoked resize virtual tasks
test: add tests to check the list of resize virtual tasks
test: add tests to check spilt and merge virtual tasks status
test: test_tablet_tasks: generalize functions
replica: service: add split virtual task's children
replica: service: pass parent info down to storage_group::split
tasks: children of virtual tasks aren't internal by default
tasks: initialize shard in task_info ctor
service: extend tablet_virtual_task::abort
service: retrun status_helper struct from tablet_virtual_task::get_status_helper
service: extend tablet_virtual_task::wait
tasks: add suspended task state
service: extend tablet_virtual_task::get_status
service: extend tablet_virtual_task::contains
service: extend tablet_virtual_task::get_stats
service: add service::task_manager_module::get_nodes
tasks: add task_manager::get_nodes
tasks: drop noexcept from module::get_nodes
replica: service: add resize_task_info static column to system.tablets
locator: extend tablet_task_info to cover resize tasks
The API /storage_service/truncate/{ks} returns an unimplemented
error when invoked. As we already have a CQL command,
`TRUNCATE TABLE ks.cf` that causes the table to be truncated on all
nodes, the API can be dropped. Due to the error, it is unused.
Fixes https://github.com/scylladb/scylladb/issues/10520
No backport is required. A small cleanup of not working API.
Closesscylladb/scylladb#22258
Introduces two endpoints with operations specific to service levels:
- switch_tenants: updates the scheduling group of all connections to be
aligned with the service level specific to the logged in user. This is
mostly legacy API, as with service levels on raft this is done
automatically.
- count_connections: for each user and for each scheduling group, counts
how many connections are assigned to that user and scheduling group.
This API is used in tests.
There are two of those -- the POST /storage_service/keyspace that loads
and streams new sstables from /upload and POST /storage_service/restore
that does the same, but gets sstables from object store.
The new optional parameter allow users to tun the streaming phase
behavior. The test/pylib client part is also updated here.
Signed-off-by: Pavel Emelyanov <xemul@scylladb.com>
before this change, we enumerate the sstables tracked by the
system.sstables table, and restore them when serving
requests to "storage_service/restore" API. this works fine with
"storage_service/backup" API. but this "restore" API cannot be
used as a drop-in replacement of the rclone based API currently
used by scylla-manager.
in order to fill the gap, in this change:
* add the "prefix" parameter for specifying the shared prefix of
sstables
* add the "sstables" parameter for specifying the list of TOC
components of sstables
* remove the "snapshot" parameter, as we don't encode the prefix
on scylla's end anymore.
* make the "table" parameter mandatory.
Fixes https://github.com/scylladb/scylladb/issues/20461
----
this change is a part of the efforts to bring the native backup/restore to scylla, no need to backprt.
Closesscylladb/scylladb#20685
* github.com:scylladb/scylladb:
treewide: accept list of sstables in "restore" API
sstable: pass get_storage_option to sstable_directory::load_sstable()
test/nodetool: add body parameter to `expected_request`
tools/scylla-nodetool: enable nodetool to write HTTP body
before this change, we enumerate the sstables tracked by the
system.sstables table, and restore them when serving
requests to "storage_service/restore" API. this works fine with
"storage_service/backup" API. but this "restore" API cannot be
used as a drop-in replacement of the rclone based API currently
used by scylla-manager.
in order to fill the gap, in this change:
* add the "prefix" parameter for specifying the shared prefix of
sstables
* add the "sstables" parameter for specifying the list of TOC
components of sstables
* remove the "snapshot" parameter, as we don't encode the prefix
on scylla's end anymore.
* make the "table" parameter mandatory.
Fixesscylladb/scylladb#20461
Signed-off-by: Kefu Chai <kefu.chai@scylladb.com>
with this parameter, "backup" API can backup the given table, this
enables it to be a drop-in replacement of existing rclone API used by
scylla manager.
in this change:
* api/storage_service: add "table" parameter to "backup" API.
* snapshot_ctl: compose the full path of the snapshot directory in
`snapshot_ctl::start_backup`. since we have all the information
for composing the snapshot directory, and what the `backup_task_impl`
class is interested is but the snapshot directory, we just pass
the path to it instead the individual components of the directory.
* backup_task_impl: instead of scan the whole keyspace recursively,
only scan the specified snapshot directory.
Fixesscylladb/scylladb#20636
Signed-off-by: Kefu Chai <kefu.chai@scylladb.com>
Added a new parameter `consider_only_existing_data` to major compaction
API endpoints. When enabled, major compaction will:
- Force-flush all tables.
- Force a new active segment in the commit log.
- Compact all existing SSTables and garbage-collect tombstones by only
checking the SSTables being compacted. Memtables, commit logs, and
other SSTables not part of the compaction will not be checked, as they
will only contain newer data that arrived after the compaction
started.
The `consider_only_existing_data` is passed down to the compaction
descriptor's `gc_check_only_compacting_sstables` option to ensure that
only the existing data is considered for garbage collection.
The option is also passed to the `maybe_flush_commitlog` method to make
sure all the tables are flushed and a new active segment is created in
the commit log.
Fixes#19728
Signed-off-by: Lakshmi Narayanan Sreethar <lakshmi.sreethar@scylladb.com>
Add nodetool commands to manage task manager tasks:
- tasks abort - aborts the task
- tasks list - lists all tasks in the module
- tasks modules - lists all modules
- tasks set-ttl - sets task ttl
- tasks status - gets status of the task
- tasks tree - gets statuses of the task and all its desendent's
- tasks ttl - gets task ttl
- tasks wait - waits for the task and gets its status
Fixes: https://github.com/scylladb/scylladb/issues/19201.
Closesscylladb/scylladb#19614
* github.com:scylladb/scylladb:
test: nodetool: add tests for tasks commands
nodetool: tasks: add nodetool commands to track task manager tasks
api: task_manager: return status 403 if a task is not abortable
api: task_manager: return none instead of empty task id
api: task_manager: add timeout to wait_task
api: task_manager: add operation to get ttl
nodetool: add suboperations support
nodetool: change operations_with_func type
nodetool: prepare operation related classes for suboperations
The method starts a task that uses sstables_loader load-and-stream
functionality to bring new sstables into the cluster. The existing
load-and-stream picks up sstables from upload/ directory, the newly
introduced task collects them from S3 bucket and given prefix (that
correspond to the path where backup API method put them).
Signed-off-by: Pavel Emelyanov <xemul@scylladb.com>
The method starts a task that uploads all files from the given
keyspace's snapshot to the requested endpoint/bucket. The task runs in
the background, its task_id is returned from the method once it's
spawned and it should be used via /task_manager API to track the task
execution and completion (hint: it's good to have non-zero TTL value to
make sure fast backups don't finish before the caller manages to call
wait_task API).
If snapshot doesn't exist, nothing happens (FIXME, need to return back
an error in that case).
If endpoint is not configured locally, the API call resolves with
bad-request instantly.
Sstables components are scanned for all tables in the keyspace and are
uploaded into the /bucket/${cf_name}/${snapshot_name}/ path.
Task is not abortable (FIXME -- to be added) and doesn't really report
its progress other than running/done state (FIXME -- to be added too).
Signed-off-by: Pavel Emelyanov <xemul@scylladb.com>
To be used to force usage of source_dc, even
when it is unsafe for rebuild.
Update docs and add test/nodetool/test_rebuild.py
Signed-off-by: Benny Halevy <bhalevy@scylladb.com>
Add a CQL server testing API with and endpoint to dump
service level parameters of all CQL connections.
This endpoint will be later used to test functionality of
automated updating CQL connections parameters.
Virtual tasks are supported by get_task_status, abort_task and
wait_task.
Task status returned by get_task_status and wait_task:
- contains task_kind to indicate whether it's virtual (cluster) or
regular (node) task;
- children list apart from task_id contains node address of the task.
task_manager/list_module_tasks/{module} starts supporting virtual tasks,
which means that their stats will also be shown for users.
Additional task_kind param is added to indicate whether the task is
virutal (cluster-wide) or regular (node-wide).
Support in other paths will be added in following patches.
Current upgrade dtest rely on a ccm node function to
get_highest_supported_sstable_version() that looks for
r'Feature (.*)_SSTABLE_FORMAT is enabled' in the log files.
Starting from scylla-6.0 ME_SSTABLE_FORMAT is enabled by default
and there is no cluster feature for it. Thus get_highest_supported_sstable_version()
returns an empty list resulting in the upgrade tests failures.
This change introduces a seperate API path that returns the highest
supported sstable format (one of la, mc, md, me) by a scylla node.
Fixesscylladb/scylladb#19772
Backports to 6.0 and 6.1 required. The current upgrade test in dtest
checks scylla upgrades up to version 5.4 only. This patch is a
prerequisite to backport the upgrade tests fix in dtest.
Closesscylladb/scylladb#19787
This will allow to trigger the read barrier directly via the API,
instead of doing work-arounds (like dropping a non-existent table).
The intended use-case is in the Scylla Manager, to make sure that
the database schema is up to date after the data has been backed up
and before attempting to backup the database schema.
The database schema in particular is being backed up just on a single
node, which might not yet have the schema at least as new as the data
(data can be migrated to a newer schema, but not a vice-versa).
The read barrier issued on the node should ensure that the node should
have the schema at least as new as the data or newer.
Closes#19213
thrift support was deprecated since ScyllaDB 5.2
> Thrift API - legacy ScyllaDB (and Apache Cassandra) API is
> deprecated and will be removed in followup release. Thrift has
> been disabled by default.
so let's drop it. in this change,
* thrift protocol support is dropped
* all references to thrift support in document are dropped
* the "thrift_version" column in system.local table is preserved for backward compatibility, as we could load from an existing system.local table which still contains this clolumn, so we need to write this column as well.
* "/storage_service/rpc_server" is only preserved for backward compatibility with java-based nodetool.
Fixes#3811Fixes#18416
Signed-off-by: Kefu Chai <kefu.chai@scylladb.com>
- [x] not a fix, no need to backport
Closesscylladb/scylladb#18453
* github.com:scylladb/scylladb:
config: expand on rpc_keepalive's description
api: s/rpc/thrift/
db/system_keyspace: drop thrift_version from system.local table
transport: do not return client_type from cql_server::connection::make_client_key()
treewide: drop thrift support
Allow external code to obtain information about an error injection
point, including whether it is enabled, and importantly, what its
parameters are. Together with the `set_parameter()` added in the
previous patch, this allows tests to read out the values of internal
parameters, via a set_parameter() injection point.
replace all occurrences of "rpc" in function names and debugging
messages to "thrift", as "rpc" is way too general, and since we
are removing "thrift" support, let's take this opportunity to
use a more specific name.
Signed-off-by: Kefu Chai <kefu.chai@scylladb.com>
thrift support was deprecated since ScyllaDB 5.2
> Thrift API - legacy ScyllaDB (and Apache Cassandra) API is
> deprecated and will be removed in followup release. Thrift has
> been disabled by default.
so let's drop it. in this change,
* thrift protocol support is dropped
* all references to thrift support in document are dropped
* the "thrift_version" column in system.local table is
preserved for backward compatibility, as we could load
from an existing system.local table which still contains
this clolumn, so we need to write this column as well.
* "/storage_service/rpc_server" is only preserved for
backward compatibility with java-based nodetool.
* `rpc_port` and `start_rpc` options are preserved, but
they are marked as "Unused". so that the new release
of scylladb can consume existing scylla.yaml configurations
which might contain these settings. by making them
deprecated, user will be able get warned, and update
their configurations before we actually remove them
in the next major release.
Fixes#3811Fixes#18416
Signed-off-by: Kefu Chai <kefu.chai@scylladb.com>
Add a keyspace and cf parameter. When specified, the endpoint will
return token -> primary replica mapping for the table's tablet tokens,
not the vnodes.
Copied from the add_replica counterpart
TODO: Generalize common parts of move_tablet and add_|del_tablet_replica
Signed-off-by: Pavel Emelyanov <xemul@scylladb.com>
The new API submits rebuild transition with new replicas set to be old
(current) replicas plus the provided one. It looks and acts like the
move_tablet API call with several changes:
- lacks the "source" replica argument
- submits "rebuild" transition kind
- cross racks checks are not performed
The 'force' argument is inherited from move_tablet, but is unused now
and is left for future.
Signed-off-by: Pavel Emelyanov <xemul@scylladb.com>
This PR fixes a problem with replacing a node with tablets when
RF=N. Currently, this will fail because tablet replica allocation for
rebuild will not be able to find a viable destination, as the replacing node
is not considered to be a candidate. It cannot be a candidate because
replace rolls back on failure and we cannot roll back after tablets
were migrated.
The solution taken here is to not drain tablet replicas from replaced
node during topology request but leave it to happen later after the
replaced node is in left state and replacing node is in normal state.
The replacing node waits for this draining to be complete on boot
before the node is considered booted.
Fixes https://github.com/scylladb/scylladb/issues/17025
Nodes in the left state will be kept in tablet replica sets for a while after node
replace is done, until the new replica is rebuilt. So we need to know
about those node's location (dc, rack) for two reasons:
1) algorithms which work with replica sets filter nodes based on their location. For example materialized views code which pairs base replicas with view replicas filters by datacenter first.
2) tablet scheduler needs to identify each node's location in order to make decisions about new replica placement.
It's ok to not know the IP, and we don't keep it. Those nodes will not
be present in the IP-based replica sets, e.g. those returned by
get_natural_endpoints(), only in host_id-based replica
sets. storage_proxy request coordination is not affected.
Nodes in the left state are still not present in token ring, and not
considered to be members of the ring (datacanter endpoints excludes them).
In the future we could make the change even more transparent by only
loading locator::node* for those nodes and keeping node* in tablet replica sets.
Currently left nodes are never removed from topology, so will
accumulate in memory. We could garbage-collect them from topology
coordinator if a left node is absent in any replica set. That means we
need a new state - left_for_real.
Closesscylladb/scylladb#17388
* github.com:scylladb/scylladb:
test: py: Add test for view replica pairing after replace
raft, api: Add RESTful API to query current leader of a raft group
test: test_tablets_removenode: Verify replacing when there is no spare node
doc: topology-on-raft: Document replace behavior with tablets
tablets, raft topology: Rebuild tablets after replacing node is normal
tablets: load_balancer: Access node attributes via node struct
tablets: load_balancer: Extract ensure_node()
mv: Switch to using host_id-based replica set
effective_replication_map: Introduce host_id-based get_replicas()
raft topology: Keep nodes in the left state to topology
tablets: Introduce read_required_hosts()
