since Boost.Test relies on operator<< or `boost_test_print_type()`
to print the value of variables being compared, instead of defining
the fallback formatter of `boost_test_print_type()` for each
individual test, let's define it in `test/lib/test_utils.hh`, so
that it can be shared across tests.
Refs #13245
Signed-off-by: Kefu Chai <kefu.chai@scylladb.com>
Closesscylladb/scylladb#18260
Some tests want to ignore out_of_range exception in continuation and go
the longer route for that
Signed-off-by: Pavel Emelyanov <xemul@scylladb.com>
Closesscylladb/scylladb#18216
get0() dates back from the days where Seastar futures carried tuples, and
get0() was a way to get the first (and usually only) element. Now
it's a distraction, and Seastar is likely to deprecate and remove it.
Replace with seastar::future::get(), which does the same thing.
this series
1. let sstable tests using test_env to use uuid-based sstable identifiers by default
2. let the test who requires integer-based identifier keep using it
this should enable us to perform the s3 related test after enforcing the uuid-based identifier for s3 backend, otherwise the s3 related test would fail as it also utilize `test_env`.
Closesscylladb/scylladb#14553
* github.com:scylladb/scylladb:
test: set use_uuid to true by default in sstables::test_env
test: enable test to set uuid_sstable_identifiers
some of the tests are still relying on the integer-based sstable
identifier, so let's add a method to test_env, so that the tests
relying on this can opt-out. we will change the default setting
of sstables::test_env to use uuid-base sstable identifier in the
next commit. this change does not change the existing behavior.
it just adds a new knob to test_env_config. and let the tests
relying on this to customize the test_env_config to disable
use_uuid.
Signed-off-by: Kefu Chai <kefu.chai@scylladb.com>
for faster build times and clear inter-module dependencies, we
should not #includes headers not directly used. instead, we should
only #include the headers directly used by a certain compilation
unit.
in this change, the source files under "/compaction" directories
are checked using clangd, which identifies the cases where we have
an #include which is not directly used. all the #includes identified
by clangd are removed, except for "test/lib/scylla_test_case.hh"
as it brings some command line options used by scylla tests.
see also https://clangd.llvm.org/guides/include-cleaner#unused-include-warning
Signed-off-by: Kefu Chai <kefu.chai@scylladb.com>
Closes#14922
There's a rather boring test_sstable_exists() helper in the test that
can be replaced with a more standard seastar API call.
Signed-off-by: Pavel Emelyanov <xemul@scylladb.com>
The helper class is used to transfer directory name and generation int
value into the compare_sstables() helper. Remove both, the utils/ stuff
is useful enough not to use wrappers.
Signed-off-by: Pavel Emelyanov <xemul@scylladb.com>
There's yet another implementation of read-the-whole-file and
check-file-contents-matches helpers in the test. Replace it with the
utils/ facility. Next patch will be able to wash more stuff out of
this test.
Signed-off-by: Pavel Emelyanov <xemul@scylladb.com>
this change is one of the series which drops most of the callers
using SSTable generation as integer. as the generation of SSTable
is but an identifier, we should not use it as an integer out of
generation_type's implementation. so, in this change, instead of
using the helper accepting int, we switch to the one which accepts
generation_type by offering a default paramter, which is a
generation created using 1. this preserves the existing behavior.
we will divert other callers of `reusable_sst(...,
generation_type::int)` in following-up changes in different ways.
Signed-off-by: Kefu Chai <kefu.chai@scylladb.com>
* replace generation_type::value() with generation_type::as_int()
* drop generation_value()
because we will switch over to UUID based generation identifier, the member
function or the free function generation_value() cannot fulfill the needs
anymore. so, in this change, they are consolidated and are replaced by
"as_int()", whose name is more specific, and will also work and won't be
misleading even after switching to UUID based generation identifier. as
`value()` would be confusing by then: it could be an integer or a UUID.
Signed-off-by: Kefu Chai <kefu.chai@scylladb.com>
reuse generation_generator for generating generation identifiers for
less repeatings. also, add allow update generator to update its
lastest known generation id.
Signed-off-by: Kefu Chai <kefu.chai@scylladb.com>
Use generation_type rather than generation_type::int_t
where possible and removed the deprecated
functions accepting the int_t.i
Ref #10459
Signed-off-by: Benny Halevy <bhalevy@scylladb.com>
Convert all users to use sstables::generation_type::int_t.
Further patches will continue to convert most to
using sstables::generation_type instead so we can
abstract the value type.
Signed-off-by: Benny Halevy <bhalevy@scylladb.com>
There's the lonely test case that uses the mentioned template to carry
its own instance of tempdir over its lifetime. Patch the case to re-use
the already existing env's tempdir and drop the template.
Signed-off-by: Pavel Emelyanov <xemul@scylladb.com>
these warnings are found by Clang-17 after removing
`-Wno-unused-lambda-capture` and '-Wno-unused-variable' from
the list of disabled warnings in `configure.py`.
Signed-off-by: Kefu Chai <kefu.chai@scylladb.com>
The former is a convenience wrapper over the latter. There's no real benefit in using it, but having two test_env-s is worse than just one.
Closes#12794
* github.com:scylladb/scylladb:
sstable_utils: Move the test_setup to perf/
sstable_utils: Remove unused wrappers over test_env
sstable_test: Open-code do_with_cloned_tmp_directory
sstable_test: Asynchronize statistics_rewrite case
tests: Replace test_setup::do_with_tmp_directory with test_env::do_with(_async)?
Schema related files are moved there. This excludes schema files that
also interact with mutations, because the mutation module depends on
the schema. Those files will have to go into a separate module.
Closes#12858
It's only used by the single test and apparently exists since the times
seastar was missing the future::discard_result() sugar
Signed-off-by: Pavel Emelyanov <xemul@scylladb.com>
Closes#12803
The statistics_rewrite case uses the helper that creates a copy of the
provided static directory, but it's the only user of this helper. It's
better to open-code it into the test case.
Signed-off-by: Pavel Emelyanov <xemul@scylladb.com>
It is ran inside async context and can be coded in a shorter form
without using deeply nested then-s
Signed-off-by: Pavel Emelyanov <xemul@scylladb.com>
We have enabled the command line options without changing a
single line of code, we only had to replace old include
with scylla_test_case.hh.
Next step is to add x-log-compaction-groups options, which will
determine the number of compaction groups to be used by all
instantiations of replica::table.
Signed-off-by: Raphael S. Carvalho <raphaelsc@scylladb.com>
Convert decompressed temporary buffers into tracked buffers just before
returning them to the upper layer. This ensures these buffers are known
to the reader concurrency semaphore and it has an accurate view of the
actual memory consumption of reads.
Fixes: #12448Closes#12454
This method is currently used in two places: sstable::snapshot() and
sstable::seal_sstable(). The latter additionally touches the target
backup/ subdir.
This patch moves the whole thing on storage and adds touch for all the
cases. For snapshots this might be excessive, but harmless.
Tests get their private-disclosure way to access sstable._storage in
few places to call create_links directly.
Signed-off-by: Pavel Emelyanov <xemul@scylladb.com>
The method became unused since 70e5252a (table: no longer accept online
loading of SSTable files in the main directory) and the whole concept of
reshuffling sstables was dropped later by 7351db7c (Reshape upload files
and reshard+reshape at boot).
Signed-off-by: Pavel Emelyanov <xemul@scylladb.com>
Closes#12165
`generation_type` is (supposed to be) conceptually different from
`int64_t` (even if physically they are the same), but at present
Scylla code still largely treats them interchangeably.
In addition to using `generation_type` in more places, we
provide (no-op) `generation_value()` and `generation_from_value()`
operations to make the smoke-and-mirrors more believable.
The churn is considerable, but all mechanical. To avoid even
more (way, way more) churn, unit test code is left untreated for
now, except where it uses the affected core APIs directly.
Signed-off-by: Michael Livshin <michael.livshin@scylladb.com>
When iterating over a compound key with legacy_compound_view<>, when the
key is "singular" (i.e., a single column) we need to iterate over just the
component's actual bytes - without the two length bytes or end-of-component
byte. In particular, when the component is an *empty string*, the iteration
should return zero bytes. In other words, we should have begin() == end().
Unfortunately, this is not what happened - for an empty singular key, the
iterator returned for begin() was slightly different from end() - so
code using this iterator would not know there is nothing to iterate.
So in this patch we fix begin() and end() to return the same thing
if we have an empty singular key.
The bug in legacy_compound_view<> (which we fix here) caused a bug in
sstables::key_view::tri_compare(const schema& s, partition_key_view other),
causing it to return wrong results when comparing two empty keys. As a
result we were unable to retrieve a partition with an empty key from the
sstable index. So this patch is necessary to fix support for
empty-string keys in sstables (part of issue #9375).
This patch also includes a unit-test for this bug. We test it in the
context of sstables::key_view::tri_compare(), where it was first
discovered, and also test the legacy_compound_view itself. The included
test used to fail in both places before this patch, and pass after it.
Fixes#10178
Refs #9375
Signed-off-by: Nadav Har'El <nyh@scylladb.com>
Instead of lengthy blurbs, switch to single-line, machine-readable
standardized (https://spdx.dev) license identifiers. The Linux kernel
switched long ago, so there is strong precedent.
Three cases are handled: AGPL-only, Apache-only, and dual licensed.
For the latter case, I chose (AGPL-3.0-or-later and Apache-2.0),
reasoning that our changes are extensive enough to apply our license.
The changes we applied mechanically with a script, except to
licenses/README.md.
Closes#9937
The database, keyspace, and table classes represent the replica-only
part of the objects after which they are named. Reading from a table
doesn't give you the full data, just the replica's view, and it is not
consistent since reconciliation is applied on the coordinator.
As a first step in acknowledging this, move the related files to
a replica/ subdirectory.
We read the compressed file size from a file that was already closed,
resulting in EBADF on my machine. Not sure why it works for everyone
else.
Fix by reading the size using the path.
Closes#9675
Rename the old version to `sstables::make_reader_v1()`, to have a
nicely searcheable eradication target.
Signed-off-by: Michael Livshin <michael.livshin@scylladb.com>
In preparation for the next patch combining row_consumer and
mp_row_consumer_k_l, move row_consumer next to row_consumer.
Because row_consumer is going to be removed, we retire some
old tests for different implementations of the row_consumer
interface; as a result, we don't need to expose internal
types of kl sstable reader for tests, so all classes from
reader_impl.hh are moved to reader.cc, and the reader_impl.hh
file is deleted, and the reader.cc file has an analogous
structure to the reader.cc file in sstables/mx directory.
Signed-off-by: Wojciech Mitros <wojciech.mitros@scylladb.com>
Since compaction is layered on top of sstables, let's move all compaction code
into a new top-level directory.
This change will give me extra motivation to remove all layer violations, like
sstable calling compaction-specific code, and compaction entanglement with
other components like table and storage service.
Next steps:
- remove all layer violations
- move compaction code in sstables namespace into a new one for compaction.
- move compaction unit tests into its own file
Signed-off-by: Raphael S. Carvalho <raphaelsc@scylladb.com>
Message-Id: <20210707194058.87060-1-raphaelsc@scylladb.com>
Cassandra 3.0 deprecated the 'sstable_compression' attribute and added
'class' as a replacement. Follow by supporting both.
The SSTABLE_COMPRESSION variable is renamed to SSTABLE_COMPRESSION_DEPRECATED
to detect all uses and prevent future misuse.
To prevent old-version nodes from seeing the new name, the
compression_parameters class preserves the key name when it is
constructed from an options map, and emits the same key name when
asked to generate an options map.
Existing unit tests are modified to use the new name, and a test
is added to ensure the old name is still supported.
Fixes#8948.
Closes#8949
In preparation for caching index objects, manage them under LSA.
Implementation notes:
key_view was changed to be a view on managed_bytes_view instead of
bytes, so it now can be fragmented. Old users of key_view now have to
linearize it. Actual linearization should be rare since partition
keys are typically small.
Index parser is now not constructing the index_entry directly, but
produces value objects which live in the standard allocator space:
class parsed_promoted_index_entry;
calss parsed_partition_index_entry;
This change was needed to support consumers which don't populate the
partition index cache and don't use LSA,
e.g. sstable::generate_summary(). It's now consumer's responsibility
to allocate index_entry out of parsed_partition_index_entry.
index_entry will be an LSA-managed object. Those have to be accessed
with care, with the LSA region locked.
This patch hides most of direct index_entry accesses inside the
index_reader so that users are safe.
Replace calls to make_compressed_file_k_l_format_input_stream
with calls to make_compressed_file_m_format_input_stream.
Signed-off-by: Piotr Jastrzebski <piotr@scylladb.com>
Those tests check that created sstables have exactly the expected bytes
inside. This won't work with other sstable formats and writting LA/KA
sstables will be removed by the following patches so there's nothing
we can do with those tests but to remove them. Otherwise they will be
failing after LA/KA writting capability is removed.
Signed-off-by: Piotr Jastrzebski <piotr@scylladb.com>
In #8772, an assert validating first token <= last token
failed in leveled_manifest::overlapping.
It is unclear how we got to that state, so add validation
in sstable::set_first_and_last_keys() that the to-be-set
first and last keys are well ordered.
Otherwise, throw malformed_sstable_exception.
set_first_and_last_keys is called both on the write path
from the sstable writer before the sstable is sealed,
and on the open/load path via update_info_for_opened_data().
This series also fixes issues with unit tests with
regards to first/last keys so they won't fail the
validation.
Refs #8772
Test: unit(dev)
DTest: next-gating(dev), materialized_views_test:TestMaterializedViews.interrupt_build_process_and_resharding_half_to_max_test(debug)
* tag 'validate-first-and-last-keys-ordering-v1':
sstable: validate first and last keys ordering
test: lib: reusable_sst: save unexpected errors
test: sstable_datafile_test: stcs_reshape_test: use token_generation_for_current_shard
test: sstable_test: define primary key in schema for compressed sstable
Otherwise, the primary_key will be considered as composite,
as its length does not equal 1. That hampers token caluclation
when decorating the dirst and last keys in the summary file.
Signed-off-by: Benny Halevy <bhalevy@scylladb.com>
