In the case there are large number of column families, the sender will
send all the column families in parallel. We allow 20% of shard memory
for streaming on the receiver, so each column family will have 1/N, N is
the number of in-flight column families, memory for memtable. Large N
causes a lot of small sstables to be generated.
It is possible there are multiple senders to a single receiver, e.g.,
when a new node joins the cluster, the maximum in-flight column families
is number of peer node. The column families are sent in the order of
cf_id. It is not guaranteed that all peers has the same speed so they
are sending the same cf_id at the same time, though. We still have
chance some of the peers are sending the same cf_id.
Fixes#3065
Message-Id: <46961463c2a5e4f1faff232294dc485ac4f1a04e.1513159678.git.asias@scylladb.com>
(cherry picked from commit a9dab60b6c)
end_bound was not updated in one of the cases in which end and
end_kind was changed, as a result later merging decision using
end_bound were incorrect. end_bound was using the new key, but the old
end_kind.
Fixes#3083.
Message-Id: <1513772083-5257-1-git-send-email-tgrabiec@scylladb.com>
(cherry picked from commit dfe48bbbc7)
"4b9a34a85425d1279b471b2ff0b0f2462328929c "Merge sstable_data_source
into sstable_mutation_reader" has introduced unintentional changes, some
of them causing excessive read amplification during empty range reads.
The following patches restore the previous behaviour."
* tag 'fix-read-amplification/v1' of https://github.com/pdziepak/scylla:
sstables: set _read_enabled to false if possible
sstables: set _single_partition_read for single parititon reads
(cherry picked from commit 772d1f47d7)
Don't enforce the outgoing connections from the 'listen_address'
interface only.
If 'local_address' is given to connect() it will enforce it to use a
particular interface to connect from, even if the destination address
should be accessed from a different interface. If we don't specify the
'local_address' the source interface will be chosen according to the
routing configuration.
Fixes#3066
Signed-off-by: Vlad Zolotarov <vladz@scylladb.com>
Message-Id: <1513372688-21595-1-git-send-email-vladz@scylladb.com>
(cherry picked from commit be6f8be9cb)
"Fixes #3057."
* 'summary_recreation_fixes_v2' of github.com:raphaelsc/scylla:
tests: sstable summary recreation sanity test
sstables: make loading of sstable without summary to work again
sstables: fix summary generation with dynamic index sampling
(cherry picked from commit 11de20fc33)
Currently scylla-housekeeping-daily.service/-restart.service hardcoded
"--repo-files '/etc/yum.repos.d/scylla*.repo'" to specify CentOS .repo file,
but we use same .service for Ubuntu/Debian.
It doesn't work correctly, we need to specify .list file for Debian variants.
Signed-off-by: Takuya ASADA <syuu@scylladb.com>
Message-Id: <1513385159-15736-1-git-send-email-syuu@scylladb.com>
(cherry picked from commit c2e87f4677)
There are some users used original default cluster_name 'Test Cluster',
they will fail to start the node for cluster_name change if they use
new scylla.yaml.
'ScyllaDB Cluster' isn't more beautiful than 'Test Cluster', reset back
to original old to avoid problem for users.
Fixes#3060
Signed-off-by: Amos Kong <amos@scylladb.com>
Message-Id: <8c9dab8a64d0f4ab3a5d6910b87af696c60e5076.1513072453.git.amos@scylladb.com>
(cherry picked from commit b07de93636)
"While aa8c2cbc16 'Merge "Migrate sstables
to flat_mutation_reader" from Piotr' has converted the low-level sstable
reader to the new flat_mutation_reader interface there were still
multiple readers related to sstables that required converting,
including:
- restricted reader
- filtering reader
- single partition sstable reader
This series completes their conversion to the flat stream interface."
* tag 'flat_mutation_reader-sstable-readers/v2' of https://github.com/pdziepak/scylla:
db: convert single_key_sstalbe_reader to flat streams
db: fully convert incremental_reader_selector to flat readers
db: make make_range_sstable_reader() return flat reader
db: make column_family::make_reader() return flat reader
db: make column_family::make_sstable_reader() return a flat reader
filtering_reader: switch to flat mutation fragment streams
filtering_reader: pass a const dht::decorated_key& to the callback
mutation_reader: drop make_restricted_reader()
db: use make_restricted_flat_reader
mutation_reader: convert restricted reader to flat streams
(cherry picked from commit 6cb3b29168)
We have had an issue recently where failed SSTable writes left the
generated SSTables dangling in a potentially invalid state. If the write
had, for instance, started and generated tmp TOCs but not finished,
those files would be left for dead.
We had fixed this in commit b7e1575ad4,
but streaming memtables still have the same isse.
Note that we can't fix this in the common function
write_memtable_to_sstable because different flushers have different
retry policies.
Fixes#3062
Signed-off-by: Glauber Costa <glauber@scylladb.com>
Message-Id: <20171213011741.8156-1-glauber@scylladb.com>
(cherry picked from commit 1aabbc75ab)
"Fixes cache reader to not skip over data in some cases involving overlapping
range tombstones in different partition versions and discontinuous cache.
Introduced in 2.0
Fixes #3053."
* tag 'tgrabiec/fix-range-tombstone-slicing-v2' of github.com:scylladb/seastar-dev:
tests: row_cache: Add reproducer for issue #3053
tests: mvcc: Add test for partition_snapshot::range_tombstones()
mvcc: Optimize partition_snapshot::range_tombstones() for single version case
mvcc: Fix partition_snapshot::range_tombstones()
tests: random_mutation_generator: Do not emit dummy entries at clustering row positions
(cherry picked from commit 051cbbc9af)
"Didn't affect any release. Regression introduced in 301358e.
Fixes#3041"
* 'resharding_fix_v4' of github.com:raphaelsc/scylla:
tests: add sstable resharding test to test.py
tests: fix sstable resharding test
sstables: Fix resharding by not filtering out mutation that belongs to other shard
db: introduce make_range_sstable_reader
rename make_range_sstable_reader to make_local_shard_sstable_reader
db: extract sstable reader creation from incremental_reader_selector
db: reuse make_range_sstable_reader in make_sstable_reader
(cherry picked from commit d934ca55a7)
When fast forwarding is enabled and all readers positioned inside the
current partition return EOS, return EOS from the combined-reader
too. Instead of skipping to the next partition if there are idle readers
(positioned at some later partition) available. This will cause rows to
be skipped in some cases.
The fix is to distinguish EOS'd readers that are only halted (waiting
for a fast-forward) from thoose really out of data. To achieve this we
track the last fragment-kind the reader emitted. If that was a
partition-end then the reader is out of data, otherwise it might emit
more fragments after a fast-forward. Without this additional information
it is impossible to determine why a reader reached EOS and the code
later may make the wrong decision about whether the combined-reader as
a whole is at EOS or not.
Also when fast-forwarding between partition-ranges or calling
next_partition() we set the last fragment-kind of forwarded readers
because they should emit a partition-start, otherwise they are out of
data.
Signed-off-by: Botond Dénes <bdenes@scylladb.com>
Message-Id: <6f0b21b1ec62e1197de6b46510d5508cdb4a6977.1512569218.git.bdenes@scylladb.com>
(cherry picked from commit 9661769313)
"Convert combined_mutation_reader into a flat_mutation_reader impl. For
now - in the name of incremental progress - all consumers are updated to
use the combined reader through the
mutation_reader_from_flat_mutation_reader adaptor. The combined reader also
uses all it's sub mutation_readers through the
flat_mutation_reader_from_mutation_reader adaptor."
* 'bdenes/flatten-combined-reader-v8' of https://github.com/denesb/scylla:
Add unit tests for the combined reader - selector interactions
Add flat_mutation_reader overload of make_combined_reader
Flatten the implementation of combined_mutation_reader
Add mutation_fragment_merger
mutation_fragment::apply(): handle partition start and end too
Add non-const overload of partition_start::partition_tombstone()
Make combined_mutation_reader a flat_mutation_reader
Move the mutation merging logic to combined_mutation_reader
Remove the unnecessary indirection of mutation_reader_merger::next()
Move the implementation of combined_mutation_reader into mutation_reader_merger
Remove unused mutation_and_reader::less_compare and operator<
(cherry picked from commit 046991b0b7)
"This series makes sstable tests use flat stream interface. The main
motivation is to allow eventual removal of mutation_reader and
streamed_mutation and ensuring that the conversion between the
interfaces doesn't hide any bugs that would be otherwise found."
* tag 'flat_mutation_reader-sstable-tests/v1' of https://github.com/pdziepak/scylla:
sstables: drop read_range_rows()
tests/mutation_reader: stop using read_range_rows()
incremental_reader_selector: do not use read_range_rows()
tests/sstable: stop using read_range_rows()
sstables: drop read_row()
tests/sstables: use read_row_flat() instead of read_row()
database: use read_row_flat() instead of read_row()
tests/sstable_mutation_test: get flat_mutation_readers from mutation sources
tests/sstables: make sstable_reader return flat_mutation_reader
sstable: drop read_row() overload accepting sstable::key
tests/sstable: stop using read_row() with sstable::key
tests/flat_mutation_reader_assertions: add has_monotonic_positions()
tests/flat_mutation_reader_assertions: add produces(Range)
tests/flat_mutation_reader_assertions: add produces(mutation)
tests/flat_mutation_reader_assertions: add produces(dht::decorated_key)
tests/flat_mutation_reader_assertions: add produces(mutation_fragment::kind)
tests/flat_mutation_reader_assertions: fix fast forwarding
(cherry picked from commit 601a03dda7)
Since pbuilder chroot environment does not install CA certificates by default,
accessing https://download.opensuse.org will cause certificate verification
error.
So we need to install it before installing 3rdparty repo GPG key.
Also, checking existance of gpgkeys_curl is not needed, since it's always
not installed since we are running the script in clean chroot environment.
Signed-off-by: Takuya ASADA <syuu@scylladb.com>
Message-Id: <1512517001-27524-1-git-send-email-syuu@scylladb.com>
(cherry picked from commit 8f02967a3b)
We are getting package build error on dh_auto_install which is invoked by
pybuild.
But since we handle all installation on debian/scylla-server.install, we can
simply skip running dh_auto_install.
Fixes#3036
Signed-off-by: Takuya ASADA <syuu@scylladb.com>
Message-Id: <1512065117-15708-1-git-send-email-syuu@scylladb.com>
(cherry picked from commit 25bc18b8ff)
The universal reference was introduced so we could bind an rvalue to
the argument, but it would have sufficed to make the argument a const
reference. This is also more consistent with the function's other
overload.
Signed-off-by: Duarte Nunes <duarte@scylladb.com>
Message-Id: <20171129132758.19654-1-duarte@scylladb.com>
(cherry picked from commit cda3ddd146)
Fix two issues with serializing non-compound range tombstones as
compound: convert a non-compound clustering element to compound and
actually advertise the issue to other nodes.
* git@github.com:duarten/scylla.git rt-compact-fixes/v1:
compound_compact: Allow rvalues in size()
sstables/sstables: Convert non-compound clustering element to compound
tests/sstable_mutation_test: Verify we can write/read non-correct RTs
service/storage_service: Export non-compound RT feature
(cherry picked from commit e9cce59b85)
after 7f8b62bc0b, its move operator and ctor broke. That potentially
leads to error because data_consume_context dtor moves sstable ref
to continuation when waiting for in-flight reads from input stream.
Otherwise, sstable can be destroyed meanwhile and file descriptor
would be invalid, leading to EBADF.
Fixes#3020.
Signed-off-by: Raphael S. Carvalho <raphaelsc@scylladb.com>
Message-Id: <20171129014917.11841-1-raphaelsc@scylladb.com>
(cherry picked from commit f699cf17ae)
This series converts memtable flush reader to the new flat mutation
readers. Just like the scanning reader, flush reader concatenates
multiple partition snapshot readers in order to provide a stream
of all partitions in the memtable.
* https://github.com/pdziepak/scylla.git flat_mutation_reader-memtable-flush/v1
tests/flat_mutation_reader_assertion: add produces_partition()
memtable: make make_flush_reader() return flat_mutation_reader
flat_mutation_reader: add optimised flat_mutation_reader_opt
memtable: switch flush reader implementation to flat streams
tests/memtable: add test for flush reader
(cherry picked from commit 04106b4c96)
These tests now require having the storage service initialize, which
is needed to decide whether correct non-compound range tombstones
should be emitted or not.
Signed-off-by: Duarte Nunes <duarte@scylladb.com>
Message-Id: <20171126152921.5199-1-duarte@scylladb.com>
(cherry picked from commit 922f095f22)
The following patches convert sstable writers to use flat mutation
readers instead of the legacy mutation_reader interface.
Writers were already using flat consumer interface and used
consume_flattened_in_thread(), so most of the work was limited to
providing an appropriate equivalent for flat mutation readers.
* https://github.com/pdziepak/scylla.git flat_mutation_reader-sstable-write/v1:
flat_mutation_reader: move consumer_adapter out of consume()
flat_mutation_reader: introduce consume_in_thread()
tests/flat_mutation_reader: test consume_in_thread()
sstables: switch write_components() to flat_mutation_reader
streamed_mutation: drop streamed_mutation_returning()
sstables: convert compaction to flat_mutation_reader
mutation_reader: drop consume_flattened_in_thread()
(cherry picked from commit 596ebaed1f)
This series mainly fixes issues with the serialization of promoted
index entries for non-compound schemas and with the serialization of
range tombstones, also for non-compound schemas.
We lift the correct cell name writing code into its own function,
and direct all users to it. We also ensure backward compatibility with
incorrectly generated promoted indexes and range tombstones.
Fixes#2995Fixes#2986Fixes#2979Fixes#2992Fixes#2993
* git@github.com:duarten/scylla.git promoted-index-serialization/v3:
sstables/sstables: Unify column name writers
sstables/sstables: Don't write index entry for a missing row maker
sstables/sstables: Reuse write_range_tombstone() for row tombstones
sstables/sstables: Lift index writing for row tombstones
sstables/sstables: Leverage index code upon range tombstone consume
sstables/sstables: Move out tombstone check in write_range_tombstone()
sstables/sstables: A schema with static columns is always compound
sstables/sstables: Lift column name writing logic
sstables/sstables: Use schema-aware write_column_name() for
collections
sstables/sstables: Use schema-aware write_column_name() for row marker
sstables/sstables: Use schema-aware write_column_name() for static row
sstables/sstables: Writing promoted index entry leverages
column_name_writer
sstables/sstables: Add supported feature list to sstables
sstables/sstables: Don't use incorrectly serialized promoted index
cql3/single_column_primary_key_restrictions: Implement is_inclusive()
cql3/delete_statement: Constrain range deletions for non-compound
schemas
tests/cql_query_test: Verify range deletion constraints
sstables/sstables: Correctly deserialize range tombstones
service/storage_service: Add feature for correct non-compound RTs
tests/sstable_*: Start the storage service for some cases
sstables/sstable_writer: Prepare to control range tombstone
serialization
sstables/sstables: Correctly serialize range tombstones
tests/sstable_assertions: Fix monotonicity check for promoted indexes
tests/sstable_assertions: Assert a promoted index is empty
tests/sstable_mutation_test: Verify promoted index serializes
correctly
tests/sstable_mutation_test: Verify promoted index repeats tombstones
tests/sstable_mutation_test: Ensure range tombstone serializes
correctly
tests/sstable_datafile_test: Add test for incorrect promoted index
tests/sstable_datafile_test: Verify reading of incorrect range
tombstones
sstables/sstable: Rename schema-oblivious write_column_name() function
sstables/sstables: No promoted index without clustering keys
tests/sstable_mutation_test: Verify promoted index is not generated
sstables/sstables: Optimize column name writing and indexing
compound_compat: Don't assume compoundness
(cherry picked from commit bd1efbc25c)
TTL of 1 second may cause the cell to expire right after we write it,
if the second component of current time changes right after it. Use
larger ttl to avoid spurious faliures due to this.
Message-Id: <1511463392-1451-1-git-send-email-tgrabiec@scylladb.com>
(cherry picked from commit 35e404b1a2)
Prometheus histograms have 3 embedded metrics: count, buckets, and sum.
Currently we fill up count and buckets but sum is left at 0. This is
particularly bad, since according to the prometheus documentation, the
best way to calculate histogram averages is to write:
rate(metric_sum[5m]) / rate(metric_count[5m])
One way of keeping track of the sum is adding the value we sampled,
every time we sample. However, the interface for the estimated histogram
has a method that allows to add a metric while allowing to adjust the
count for missing metrics (add_nano())
That makes acumulating a sum inaccurate--as we will have no values for
the points that were added. To overcome that, when we call add_nano(),
we pretend we are introducing new_count - _count metrics, all with the
same value.
Long term, doing away with sampling may help us provide more accurate
results.
After this patch, we are able to correctly calculate latency averages
through the data exported in prometheus.
Signed-off-by: Glauber Costa <glauber@scylladb.com>
Message-Id: <20171122144558.7575-1-glauber@scylladb.com>
(cherry picked from commit 6c4e8049a0)
* seastar-dev.git haaawk/flat_reader_remove_read_rows:
sstable_mutation_test: use read_rows_flat instead of read_rows
perf_sstable: use read_rows_flat instead of read_rows
Remove sstable::read_rows
(cherry picked from commit e9ffe36d65)
Introduce sstable::read_row_flat and sstable::read_range_rows_flat methods
and use them in sstable::as_mutation_source.
* https://github.com/scylladb/seastar-dev/tree/haaawk/flat_reader_sstables_v3:
Introduce conversion from flat_mutation_reader to streamed_mutation
Add sstables::read_rows_flat and sstables::read_range_rows_flat
Turn sstable_mutation_reader into a flat_mutation_reader
sstable: add getter for filter_tracker
Move mp_row_consumer methods implementations to the bottom
Remove unused sstable_mutation_reader constructor
Replace "sm" with "partition" in get_next_sm and on_sm_finished
Move advance_to_upper_bound above sstable_mutation_reader
Store sstable_mutation_reader pointer in mp_row_consumer
Stop using streamed_mutation in consumer and reader
Stop using streamed_mutation in sstable_data_source
Delete sstable_streamed_mutation
Introduce sstable::read_row_flat
Migrate sstable::as_mutation_source to flat_mutation_reader
Remove single_partition_reader_adaptor
Merge data_consume_context::impl into data_consume_context
Create data_consume_context_opt.
Merge on_partition_finished into mark_partition_finished
Check _partition_finished instead of _current_partition_key
Merge sstable_data_source into sstable_mutation_reader
Remove sstable_data_source
Remove get_next_partition and partition_header
(cherry picked from commit aa8c2cbc16)
