The problem was that "s" would not be marked as synced-with if it came from
shard != 0.
As a result, mutation using that schema would fail to apply with an exception:
"attempted to mutate using not synced schema of ..."
The problem could surface when altering schema without changing
columns and restarting one of the nodes so that it forgets past
versions.
Fixes#1258.
Will be covered by dtest:
SchemaManagementTest.test_prepared_statements_work_after_node_restart_after_altering_schema_without_changing_columns
From Avi:
When we shut down, we may have to give up on some pending atomic
sstable deletions, because not all shards may have agreed to delete
all members of the set.
This is expected, so silence these frightening error messages.
Fixes#1235.
This patch adds support for secure connection attempts to be
cancellable.
Fixes#862
Includes seastar upstream merge:
* seastar f1a3520...7782ad4 (1):
> Merge "rpc: Allow client connections to be cancelled" from Duarte
Signed-off-by: Duarte Nunes <duarte@scylladb.com>
Message-Id: <1462783335-10731-1-git-send-email-duarte@scylladb.com>
Avi says:
"During shutdown, we prevent new compactions, but perhaps too late.
Memtables are flushed and these can trigger compaction."
To solve that, let's stop compaction manager at a very early step
of shutdown. We will still try to stop compaction manager in
database::stop() because user may ask for a shutdown before scylla
was fully started. It's fine to stop compaction manager twice.
Only the first call will actually stop the manager.
Fixes#1238.
Signed-off-by: Raphael S. Carvalho <raphaelsc@scylladb.com>
Message-Id: <c64ab11f3c91129c424259d317e48abc5bde6ff3.1462496694.git.raphaelsc@scylladb.com>
* seastar e536555...ab74536 (4):
> reactor: kill max_inline_continuations
> smp: optimize smp_message_queue::flush_request_batch() for empty queue
> thread: do not yield if idle
> Merge "Fixes for iotune" from Glauber
Clustering key prefix may have less columns than described in schema.
Deserailiaztion should stop when end of buffer is reached.
Message-Id: <20160503140420.GP23113@scylladb.com>
It was noticed that small sstables will accumulate for a column family because
scylla was limited to two compaction per shard, and a column family could have
at most one compaction running at a given shard. With the number of sstables
increasing rapidly, read performance is degraded.
At the moment, our compaction manager works by running two compaction task
handlers that run in parallel to the rest of the system. Each task handler
gets to run when needed, gets a column family from compaction manager queue,
runs compaction on it, and goes to sleep again. That's basically its cycle.
Compaction manager only allows one instance of a column family to be on its
queue, meaning that it's impossible for a column family to be compacted in
parallel. One compaction starts after another for a given column family.
To solve the problem described, we want to concurrently run compaction jobs
of a column family that have different "size tier" (or "weight").
For those unfamiliar, compaction job contains a list of sstables that will be
compacted together.
The "size tier" of a compaction job is the log of the total size of the input
sstables. So a compaction job only gets to run if its "size tier" is not the
same of an ongoing compaction. There is no point in compacting concurrently at
the same "size tier", because that slows down both compactions.
We will no longer queue column families in compaction manager. Instead, we
create a new fiber to run compaction on demand.
This fiber that runs asynchronously will do the following:
1) Get a compaction job from compaction strategy.
2) Calculate "size tier" of compaction job.
3) Run compaction job if its "size tier" is not the same of an ongoing
compaction for the given column family.
As before, it may decide to re-compact a column family based on a stat stored
in column family object.
Ran all compaction-related dtests.
Fixes#1216.
Reviewed-by: Nadav Har'El <nyh@scylladb.com>
Signed-off-by: Raphael S. Carvalho <raphaelsc@scylladb.com>
Message-Id: <d30952ff136192a522bde4351926130addec8852.1462311908.git.raphaelsc@scylladb.com>
In initial implementation I figured this was not required, but
we get issues communicating across nodes if system tables
don't have the same UUID, since creation is forcefully local, yet
shared.
Just do a manual re-create of the scema with a name UUID, and
use migration manager directly.
Message-Id: <1462194588-11964-1-git-send-email-calle@scylladb.com>
The patch calculates row count during result building and while merging.
If one of results that are being merged does not have row count the
merged result will not have one either.
Fixes: #1220
While the server_credentials object is technically immutable
(esp with last change in seastar), the ::shared_ptr holding them
is not safe to share across shards.
Pre-create cpu x credentials and then move-hand them out in service
start-up instead.
Fixes assertion error in debug builds. And just maybe real memory
corruption in release.
Requires seastar tls change:
"Change server_credentials to copy dh_params input"
Message-Id: <1462187704-2056-1-git-send-email-calle@scylladb.com>
Leveled compaction strategy is doing a lot of work whenever it's asked to get
a list of sstables to be compacted. It's checking if a sstable overlaps with
another sstable in the same level twice. First, when adding a sstable to a
list with sstables at the same level. Second, after adding all sstables to
their respective lists.
It's enough to check that a sstable creates an overlap in its level only once.
So I am changing the code to unconditionally insert a sstable to its respective
list, and after that, it will call repair_overlapping_sstables() that will send
any sstable that creates an overlap in its level to L0 list.
By the way, the optimization isn't in the compaction itself, instead in the
strategy code that gets a set of sstables to be compacted.
Reviewed-by: Nadav Har'El <nyh@scylladb.com>
Signed-off-by: Raphael S. Carvalho <raphaelsc@scylladb.com>
Message-Id: <8c8526737277cb47987a3a5dbd5ff3bb81a6d038.1461965074.git.raphaelsc@scylladb.com>
Currently scylla_setup is unusable when user does not want to install scylla-jmx because it checks package unconditionally, but some users (or developers) does not want to install it, so let's ask to skip check or not on interactive prompt.
Also, scylla-tools package should installed for most of the case, added check code for the package.
Signed-off-by: Takuya ASADA <syuu@scylladb.com>
Message-Id: <1460662354-10221-1-git-send-email-syuu@scylladb.com>
On Ubuntu 15.04 and newer, official g++ package is >= g++-4.9.
So we don't need to use development repository, just use official package.
Signed-off-by: Takuya ASADA <syuu@scylladb.com>
To handle scylla startup correctly on systemd versions of Ubuntu, scylla requires to build with libsystemd-dev.
Signed-off-by: Takuya ASADA <syuu@scylladb.com>
Since 16.04LTS does not support this argument anymore, drop it on recent version of Ubuntu which does not uses Upstart.
Signed-off-by: Takuya ASADA <syuu@scylladb.com>
Use distribution's thrift if version > 14.04LTS.
14.04LTS doesn't have thrift-compiler-0.9.1, use our version.
Signed-off-by: Takuya ASADA <syuu@scylladb.com>
Amnon reports that current code fails to compile on gcc 4.9:
distcc[9700] ERROR: compile /home/amnon/.ccache/tmp/query.tmp.localhost.localdomain.9673.ii on localhost failed
In file included from query.cc:30:0:
query-result-reader.hh: In instantiation of ‘void query::result_view::consume(const query::partition_slice&, ResultVisitor&&) [with ResultVisitor = query::result::calculate_row_count(const query::partition_slice&)::<anonymous struct>&]’:
query.cc:196:32: required from here
query-result-reader.hh:184:21: error: cannot pass objects of non-trivially-copyable type ‘class clustering_key_prefix’ through ‘...’
visitor.accept_new_row(*row.key(), static_row, view);
^
query-result-reader.hh:184:21: error: cannot pass objects of non-trivially-copyable type ‘class query::result_row_view’ through ‘...’
query-result-reader.hh:184:21: error: cannot pass objects of non-trivially-copyable type ‘class query::result_row_view’ through ‘...’
query-result-reader.hh:186:21: error: cannot pass objects of non-trivially-copyable type ‘class query::result_row_view’ through ‘...’
visitor.accept_new_row(static_row, view);
^
query-result-reader.hh:186:21: error: cannot pass objects of non-trivially-copyable type ‘class query::result_row_view’ through ‘...’
Work around the problem by not using '...'.
Message-Id: <1460964042-2867-1-git-send-email-tgrabiec@scylladb.com>
Drop dependency to libthrift0 on installation time, link libthrift statically.
With this fix, we don't need to distribute libthrift0 deb package anymore to install scylla-server binary package.
Signed-off-by: Takuya ASADA <syuu@scylladb.com>
Message-Id: <1461594460-2403-2-git-send-email-syuu@scylladb.com>
* seastar 2b3c363...15a92cf (2):
> smp: allow more than 128 in-flight operations on core-to-core queue
> future: balance constructors and destructors in future_state<>
Fixes#1205.
"has_keyspace_access" is not supposed to (according to origin)
verify that a keyspace exists. Remove.
It (and all others) are however supposed to check "ks" (name)
not empty. Add this.
Message-Id: <1461578072-24113-1-git-send-email-calle@scylladb.com>
