Single-row reads from large partition issue 64 KiB reads to the data file,
which is equal to the default span of the promoted index block in the data file.
If users would want to increase selectivity of the index to speed up single-row reads,
this won't be effective. The reason is that the reader uses promoted index
to look up the start position in the data file of the read, but end position
will in practice extend to the next partition, and amount of I/O will be
determined by the underlying file input stream implementation and its
read-ahead heuristics. By default, that results in at least 2 IOs 32KB each.
There is already infrastructure to lookup end position based on upper
bound of the read, in anticipation for sharing the promoted index cache,
but it's not effective becasue it's a non-populating lookup and the upper
bound cursor has its own private cached_promoted_index, which is cold
when positions are computed. It's non-populating on purpose, to avoid
extra index file IO to read upper bound. In case upper bound is far-enough
from the lower bound, this will only increase the cost of the read.
The solution employed here is to warm up the lower bound cursor's
cache before positions are computed, and use that cursor for
non-populating lookup of the upper bound.
We use the lower bound cursor and the slice's lower bound so that we
read the same blocks as later lower-bound slicing would, so that we
don't incur extra IO for cases where looking up upper bound is not
worth it, that is when upper bound is far from the lower bound. If
upper bound is near lower bound, then warming up using lower bound
will populate cached_promoted_index with blocks which will allow us to
locate the upper bound block accurately. This is especially important
for single-row reads, where the bounds are around the same key. In
this case we want to read the data file range which belongs to a
single promoted index block. It doesn't matter that the upper bound
is not exactly the same. They both will likely lie in the same block,
and if not, binary search will bring adjacent blocks into cache. Even
if upper bound is not near, the binary search will populate the cache
with blocks which can be used to narrow down the data file range
somewhat.
Fixes#10030.
The change was tested with perf-fast-forward.
I populated the data set with `column_index_size_in_kb` set to 1
scylla perf-fast-forward --populate --run-tests=large-partition-slicing --column-index-size-in-kb=1
Test run:
build/release/scylla perf-fast-forward --run-tests=large-partition-select-few-rows -c1 --keep-cache-across-test-cases --test-case-duration=0
This test issues two reads of subsequent keys from the middle of a large partition (1M rows in total). The first read will miss in the index file page cache, the second read will hit.
Notice that before the change, the second read issued 2 aio requests worth of 64KiB in total.
After the change, the second read issued 1 aio worth of 2 KiB. That's because promoted index block is larger than 1 KiB.
I verified using logging that the data file range matches a single promoted index block.
Also, the first read which misses in cache is still faster after the change.
Before:
```
running: large-partition-select-few-rows on dataset large-part-ds1
Testing selecting few rows from a large partition:
stride rows time (s) iterations frags frag/s mad f/s max f/s min f/s avg aio aio (KiB) blocked dropped idx hit idx miss idx blk c hit c miss c blk allocs tasks insns/f cpu
500000 1 0.009802 1 1 102 0 102 102 21.0 21 196 2 1 0 1 1 0 0 0 568 269 4716050 53.4%
500001 1 0.000321 1 1 3113 0 3113 3113 2.0 2 64 1 0 1 0 0 0 0 0 116 26 555110 45.0%
```
After:
```
running: large-partition-select-few-rows on dataset large-part-ds1
Testing selecting few rows from a large partition:
stride rows time (s) iterations frags frag/s mad f/s max f/s min f/s avg aio aio (KiB) blocked dropped idx hit idx miss idx blk c hit c miss c blk allocs tasks insns/f cpu
500000 1 0.009609 1 1 104 0 104 104 20.0 20 137 2 1 0 1 1 0 0 0 561 268 4633407 43.1%
500001 1 0.000217 1 1 4602 0 4602 4602 1.0 1 2 1 0 1 0 0 0 0 0 110 26 313882 64.1%
```
Backports: none, not a regression
Closesscylladb/scylladb#20522
* github.com:scylladb/scylladb:
perf: perf_fast_forward: Add test case for querying missing rows
perf-fast-forward: Allow overriding promoted index block size
perf-fast-forward: Test subsequent key reads from the middle in test_large_partition_select_few_rows
perf-fast-forward: Allow adding key offset in test_large_partition_select_few_rows
perf-fast-forward: Use single-partition reads in test_large_partition_select_few_rows
sstables: bsearch_clustered_cursor: Add more tracing points
sstables: reader: Log data file range
sstables: bsearch_clustered_cursor: Unify skip_info logging
sstables: bsearch_clustered_cursor: Narrow down range using "end" position of the block
sstables: bsearch_clustered_cursor: Skip even to the first block
test: sstables: sstable_3_x_test: Improve failure message
sstables: mx: writer: Never include partition_end marker in promoted index block width
sstables: Reduce amount of I/O for clustering-key-bounded reads from large partitions
sstables: clustered_cursor: Track current block
In the current scenario, the nodetool status doesn’t display information regarding zero token nodes. For example, if 5 nodes are spun by the administrator, out of which, 2 nodes are zero token nodes, then nodetool status only shows information regarding the 3 non-zero token nodes.
This commit intends to fix this issue by leveraging the “/storage_service/host_id ” API and adding appropriate logic in scylla-nodetool.cc to support zero token nodes.
A test is also added in nodetool/test_status.py to verify this logic. This test fails without this commit’s zero token node support logic, hence verifying the behavior.
This PR fixes a bug. Hence we need to backport it. Backporting needs to be done only
to 6.2 version, since earlier versions don't support zero token nodes.
Fixes: scylladb/scylladb#19849Fixes: scylladb/scylladb#17857Closesscylladb/scylladb#20909
* github.com:scylladb/scylladb:
fix nodetool status to show zero-token nodes
test: move `wait_for_first_completed` to pylib/util.py
token_metadata: rename endpoint_to_host_id_map getter and add support for joining nodes
before this change, the "dist" targets are always enabled in the
CMake-based building system. but the build rules generated by
`configure.py` does respect `--enable-dist` and `--disable-dist`
command line options, and enable/distable the dist targets
respectively.
in this change, we
- add an CMake option named "Scylla_DIST". the "dist"
subdirectory in CMake only if this option is ON.
- pouplate the `--enable-dist` and `--disable-dist` option
down to cmake by setting the `Scylla_DIST` option,
when creating the build system using CMake.
this enables the CMake-based build system to be functionality
wise more closer to the legacy building system.
Refs scylladb/scylladb#2717
Signed-off-by: Kefu Chai <kefu.chai@scylladb.com>
Closesscylladb/scylladb#21253
Currently, running the `nodetool compactionhistory` command or using the rest api `curl -X GET --header "Accept: application/json" "http://localhost:10000/compaction_manager/compaction_history"` return compaction history without the `row_merged` field.
The series computes rows merged during compaction and provides this information to users via both the nodetool command and the rest api. The `rows_merged` field contains information on merged clustering keys across multiple sstable files. For instance, compacting two sstables of a table consisting of 7 rows where two rows are part of the both sstables, the output would have the following format: {1: 5, 2: 2}.
No backport is required. It extends the existing compaction history output.
Fixes https://github.com/scylladb/scylladb/issues/666Closesscylladb/scylladb#20481
* github.com:scylladb/scylladb:
test/rest_api: Add tests for compactionhistory
nodetool: Add rows merged stats into compactionhistory output
compaction: Update compaction history with collected histogram
compaction: Remove const qualifier from methods creating sstable readers
sstable_set: Add optional statistics to make_local_shard_sstable_reader
make_combined_reader: Add optional parameter, combined_reader_statistics
reader_selector: Extend with maximum reader count
mutation_fragment_merger: Create histogram while consuming mutation fragment batches
In the current scenario, the nodetool status doesn’t display information
regarding zero token nodes. For example, if 5 nodes are spun by the
administrator, out of which, 2 nodes are zero token nodes, then nodetool
status only shows information regarding the 3 non-zero token nodes.
This commit intends to fix this issue by leveraging the “/storage_service/host_id
” API and adding appropriate logic in scylla-nodetool.cc to support zero token nodes.
Robust topology tests are added, which spins up scylla nodes and confirm nodetool
status output for various cases, providing good coverage.
A test is also added in nodetool/test_status.py to verify this logic. These tests fail
without this commit’s zero token node support logic, hence verifying the behavior.
The test `test_status_keyspace_joining_node` has been removed. This test is
based on case where host_id=None, which is impossible. Since we now use
host_id_map for node discovery in nodetool, the nodes with "host_id=None"
go undetected. Since this case is anyway impossible, we can get rid of this.
This PR fixes a bug. Hence we need to backport it. Backporting needs to be done only
to 6.2 version, since earlier versions dont support zero token nodes.
Fixes: scylladb/scylladb#19849
in 6ead5a46, we included submodule changes in cqlsh and java by accident.
this was not intended. and this broke the artifacts-rocky8-test.
in this change, both changes in the submodule are reverted.
Signed-off-by: Kefu Chai <kefu.chai@scylladb.com>
Closesscylladb/scylladb#21236
Incorporate rows merged statistics into the output of the compactionhistory
command. Depending on the requested format type, the output has
different form.
For instance, compacting two sstables of a table consisting of 7
rows where two rows are part of the both sstables, the output
would have the following format:
text: {1: 5, 2: 2}
json: [{"key":1,"value":5},{"key":2,"value":1}]}
yaml: - key: 1
value: 5
- key: 2
value: 1
the log.hh under the root of the tree was created keep the backward
compatibility when seastar was extracted into a separate library.
so log.hh should belong to `utils` directory, as it is based solely
on seastar, and can be used all subsystems.
in this change, we move log.hh into utils/log.hh to that it is more
modularized. and this also improves the readability, when one see
`#include "utils/log.hh"`, it is obvious that this source file
needs the logging system, instead of its own log facility -- please
note, we do have two other `log.hh` in the tree.
Signed-off-by: Kefu Chai <kefu.chai@scylladb.com>
now that we are allowed to use C++23. we now have the luxury of using
`std::views::keys`.
in this change, we:
- replace `boost::adaptors::map_keys` with `std::views::keys`
- update affected code to work with `std::views::keys`
to reduce the dependency to boost for better maintainability, and
leverage standard library features for better long-term support.
this change is part of our ongoing effort to modernize our codebase
and reduce external dependencies where possible.
Signed-off-by: Kefu Chai <kefu.chai@scylladb.com>
Closesscylladb/scylladb#21198
This includes way too much, including <boost/regex.hpp>, which is huge.
Drop includes of adaptors.hpp and replace by what is needed.
Closesscylladb/scylladb#21187
this change is created in the same spirit of 0104c7d3, which used
`std::map::contains()` in the place of `std::map::count()` when
checking for the existence of a paramter with given name for better
readability.
Signed-off-by: Kefu Chai <kefu.chai@scylladb.com>
Closesscylladb/scylladb#21158
before this change, if no positional arguments are passed to "restore"
subcommand, the tool fails with following error message:
```
error running operation: boost::wrapexcept<boost::bad_any_cast> (boost::bad_any_cast: failed conversion using boost::any_cast)
```
this is difficult to digest.
after this change, if no sstables are specified:
```
error processing arguments: missing required parameter: sstables
```
this is slightly better from user experience's perspective.
Signed-off-by: Kefu Chai <kefu.chai@scylladb.com>
Closesscylladb/scylladb#21136
A new header provides `constexpr` functions to retrieve build
type information: `get_build_type()`, `is_release_build()`,
and `is_debug_build()`. These functions are useful when adding
changes that should be enabled at compile time only for
specific build types.
Keep a copy of the sstable uuid generation in a new
scylla_metadata sstable_identifier attribute.
If the SSTable happens to have a numerical generation
just create a new time-uuid and log a message about that.
Dump this new attribute in scylla sstable dump tool.
And add a unit test to verify that the written (and then
loaded) sstable identifier matches the sstable's generation.
The motivatrion for this change stems from backup
deduplication. In essence, an sstable may already have been
backed up in a previous snapshot, and we don't want to
abck it up again if it's already present on external storage.
Today this is based on rclone that compares files checksums,
but once scylla will backup the sstables using the native
object-storage stack (#19890), we would like to use the sstable
globally-unique identifier for deduplication. Although the
uuid-generation is encoded in the sstable path, the latter
may change, e.g. due to intra-node migration, so keep a copy
of the original unique identifier in scylla-metadata, and that
attribute would survive file-based or intra-node migrations.
Fixesscylladb/scylladb#20459
Signed-off-by: Benny Halevy <bhalevy@scylladb.com>
Closesscylladb/scylladb#21002
before this change, we enumerate the sstables tracked by the
system.sstables table, and restore them when serving
requests to "storage_service/restore" API. this works fine with
"storage_service/backup" API. but this "restore" API cannot be
used as a drop-in replacement of the rclone based API currently
used by scylla-manager.
in order to fill the gap, in this change:
* add the "prefix" parameter for specifying the shared prefix of
sstables
* add the "sstables" parameter for specifying the list of TOC
components of sstables
* remove the "snapshot" parameter, as we don't encode the prefix
on scylla's end anymore.
* make the "table" parameter mandatory.
Fixes https://github.com/scylladb/scylladb/issues/20461
----
this change is a part of the efforts to bring the native backup/restore to scylla, no need to backprt.
Closesscylladb/scylladb#20685
* github.com:scylladb/scylladb:
treewide: accept list of sstables in "restore" API
sstable: pass get_storage_option to sstable_directory::load_sstable()
test/nodetool: add body parameter to `expected_request`
tools/scylla-nodetool: enable nodetool to write HTTP body
During split prepare phase, there will be more than 1 compaction group with
overlapping token range for a given replica.
Assume tablet 1 has sstable A containing deleted data, and sstable B containing
a tombstone that shadows data in A.
Then split starts:
1) sstable B is split first, and moved from main (unsplit) group to a
split-ready group
2) now compaction runs in split-ready group before sstable A is split
tombstone GC logic today only looks at underlying group, so compaction is step
2 will discard the deleted data in A, since it belongs to another group (the
unsplit one), and so the tombstone can be purged incorrectly.
To fix it, compaction will now work with all uncompacting sstables that belong
to the same replica, since tombstone GC requires all sstables that possibly
contain shadowed data to be available for correct decision to be made.
Fixes https://github.com/scylladb/scylladb/issues/20044.
Branches 6.0, 6.1 and 6.2 are vulnerable, so backport is needed.
Closesscylladb/scylladb#20939
* github.com:scylladb/scylladb:
replica: Fix tombstone GC during tablet split preparation
service: Improve error handling for split
Currently, it may happen that the last promoted index block includes
the partition_end marker. That's because we first write the partition
end marker and then emit the unclosed block. This behavior matches
Cassandra (checked in 3.x and 5.0.1).
This is problematic for ruling out data file reads based on index.
The width field is currently unused, but it will be used later where
the width of the last block is used to compute the skip position past
the last block for lookups which land after all keys in the
partition. If width includes the marker then such a skip would land in
the next partition, which is incorrect, as the reader context expects
a cell element. Even if that was recognized, it's wrong - if this is
not a single partition read (so upper bound is not at the next
partition too), then we would read from the wrong (next) partition.
We want to be able to make such skips in order to avoid unnecessary
data file IO for reads of missing rows. Currently, we would always
read the last block even if the key is past its "end" position.
Another way to solve this would be to propagate the "past the last
block" condition from the index cursor to the reader and let it deal
with it, but the logic for that would be complicated. With this fix,
there is no special logic required.
During split prepare phase, there will be more than 1 compaction group with
overlapping token range for a given replica.
Assume tablet 1 has sstable A containing deleted data, and sstable B containing
a tombstone that shadows data in A.
Then split starts:
1) sstable B is split first, and moved from main (unsplit) group to a
split-ready group
2) now compaction runs in split-ready group before sstable A is split
tombstone GC logic today only looks at underlying group, so compaction is step
2 will discard the deleted data in A, since it belongs to another group (the
unsplit one), and so the tombstone can be purged incorrectly.
To fix it, compaction will now work with all uncompacting sstables that belong
to the same replica, since tombstone GC requires all sstables that possibly
contain shadowed data to be available for correct decision to be made.
Fixes#20044.
Signed-off-by: Raphael S. Carvalho <raphaelsc@scylladb.com>
Since we are deprecating the use of IP addresses, a warning message will be printed
if 'nodetool removenode --ignore-dead-nodes' is used with IP addresses.
before this change, we enumerate the sstables tracked by the
system.sstables table, and restore them when serving
requests to "storage_service/restore" API. this works fine with
"storage_service/backup" API. but this "restore" API cannot be
used as a drop-in replacement of the rclone based API currently
used by scylla-manager.
in order to fill the gap, in this change:
* add the "prefix" parameter for specifying the shared prefix of
sstables
* add the "sstables" parameter for specifying the list of TOC
components of sstables
* remove the "snapshot" parameter, as we don't encode the prefix
on scylla's end anymore.
* make the "table" parameter mandatory.
Fixesscylladb/scylladb#20461
Signed-off-by: Kefu Chai <kefu.chai@scylladb.com>
before this change, we always send the parameters with query strings,
but we will add an API ("storage_service/restore") which accepts its
parameters in HTTP body as well.
in this change, we add an optional parameter to `do_request()` and
`post()`, so that we can send HTTP body when using "POST" method
in nodetool implementation.
Signed-off-by: Kefu Chai <kefu.chai@scylladb.com>
with this parameter, "backup" API can backup the given table, this
enables it to be a drop-in replacement of existing rclone API used by
scylla manager.
Fixes https://github.com/scylladb/scylladb/issues/20636
---
this change is a part of the efforts to bring the native backup/restore to scylla, no need to backprt.
Closesscylladb/scylladb#20661
* github.com:scylladb/scylladb:
backup_task: fix the indent
treewide: add "table" parameter to "backup" API
We found that --clang-build-mode INSTALL_FROM tries to rebuild clang
even we use an archive of prebuilt image.
Seems like it is because ninja detected changes on standard library
headers, which updated when we build new frozen toolchain container
image.
To avoid such unnecessary rebuild, we should stop archive whole clang
build directory, we should archive install image instead.
To do so, we can use
"DESTDIR=<sysroot dir> ninja install-distribution-stripped", and archive
sysroot dir as clang archive.
Fixes#20421Closesscylladb/scylladb#20422
with this parameter, "backup" API can backup the given table, this
enables it to be a drop-in replacement of existing rclone API used by
scylla manager.
in this change:
* api/storage_service: add "table" parameter to "backup" API.
* snapshot_ctl: compose the full path of the snapshot directory in
`snapshot_ctl::start_backup`. since we have all the information
for composing the snapshot directory, and what the `backup_task_impl`
class is interested is but the snapshot directory, we just pass
the path to it instead the individual components of the directory.
* backup_task_impl: instead of scan the whole keyspace recursively,
only scan the specified snapshot directory.
Fixesscylladb/scylladb#20636
Signed-off-by: Kefu Chai <kefu.chai@scylladb.com>
Auth has been managed via Raft since Scylla 6.0. Restoring data
following the usual procedure (1) is error-prone and so a safer
method must have been designed and implemented. That's what
happens in this PR.
We want to extend `DESC SCHEMA` by auth and service levels
to provide a safe way to backup and restore those two components.
To realize that, we change the meaning of `DESC SCHEMA WITH INTERNALS`
and add a new "tier": `DESC SCHEMA WITH INTERNALS AND PASSWORDS`.
* `DESC SCHEMA` -- no change, i.e. the statement describes the current
schema items such as keyspaces, tables, views, UDTs, etc.
* `DESC SCHEMA WITH INTERNALS` -- does the same as the previous tier
and also describes auth and service levels. No information about
passwords is returned.
* `DESC SCHEMA WITH INTERNALS AND PASSWORDS` -- does the same
as the previous tier and also includes information about the salted
hashes corresponding to the passwords of roles.
To restore existing roles, we extend the `CREATE ROLE` statement
by allowing to use the option `WITH SALTED HASH = '[...]'`.
---
Implementation strategy:
* Add missing things/adjust existing ones that will be used later.
* Implement creating a role with salted hash.
* Add tests for creating a role with salted hash.
* Prepare for implementing describe functionality of auth and service levels.
* Implement describe functionality for elements of auth and service levels.
* Extend the grammar.
* Add tests for describe auth and service levels.
* Add/update documentation.
---
(1): https://opensource.docs.scylladb.com/stable/operating-scylla/procedures/backup-restore/restore.html
In case the link stops working, restoring a schema was realised
by managing raw files on disk.
Fixesscylladb/scylladb#18750Fixesscylladb/scylladb#18751Fixesscylladb/scylladb#20711Closesscylladb/scylladb#20168
* github.com:scylladb/scylladb:
docs: Update user documentation for backup and restore
docs/dev: Add documentation for DESC SCHEMA
test: Add tests for describing auth and service levels
cql3/functions/user_function: Remove newline character before and after UDF body
cql3: Implement DESCRIBE SCHEMA WITH INTERNALS AND PASSWORDS
auth: Implement describing auth
auth/authenticator: Add member functions for querying password hash
service/qos/service_level_controller: Describe service levels
data_dictionary: Remove keyspace_element.hh
treewide: Start using new overloads of describe
treewide: Fix indentation in describe functions
treewide: Return create statement optionally in describe functions
treewide: Add new describe overloads to implementations of data_dictionary::keyspace_element
treewide: Start using schema::ks_name() instead of schema::keyspace_name()
cql3: Refactor `description`
cql3: Move description to dedicated files
test: Add tests for `CREATE ROLE WITH SALTED HASH`
cql3/statements: Restrict CREATE ROLE WITH SALTED HASH
auth: Allow for creating roles with SALTED HASH
types: Introduce a function `cql3_type_name_without_frozen()`
cql3/util: Accept std::string_view rather than const sstring&
Add for both x86_64 compilation flags for clang, to get it compile with newer arch x86_64-v3 for x86 and ARM 8.2 level for aarch64.
Tested to compile fine with both clang 18.1.6 and 18.1.8.
Signed-off-by: Yaniv Kaul <yaniv.kaul@scylladb.com>
Closesscylladb/scylladb#20682
in 3cd2a61736, we dropped scylla-jmx
from the build. but didn't update the CMake building system accordingly,
this broke the CMake build, as the dependencies pointing to jmx cannot
be found or fulfilled.
in this change, we remove all references to jmx in the CMake build.
Signed-off-by: Laszlo Ersek <laszlo.ersek@scylladb.com>
Closesscylladb/scylladb#20736
* tools/java e505a6d3bb...5b0e274f12 (1):
> Merge 'build.xml: install and use java-11 when building' from Kefu Chai
Updates to clang 18.1.8 + LLVM patch to match Fedora 40.
New optimized clang build generated and stored in
https://devpkg.scylladb.com/clang/clang-18.1.8-x86_64.tar.gzhttps://devpkg.scylladb.com/clang/clang-18.1.8-aarch64.tar.gz
Due to the loss of the jmx submodule, we no longer install java-11-openjdk.
We add it in install-dependencies.sh here to compensate, pending a better
solution.
tools/java submodule updated to remove build failure where Java 8
was selected instead of Java 11.
The scylla_gdb test suite was disabled due to a regression in gdb 15,
which is brought in by the toolchain update [1].
[1] https://github.com/scylladb/scylladb/issues/20741.
Old nodetool requested `/storage_service/tokens_endpoing` first, then
`/storage_service/host_id`, while the native nodetool did it in reverse
order. Most of the time this is inconsequential but there is an edge
case when a node's IP address is changed. This reversing of the order
results in unexpected behavior for tests, causing noise via flaky
tests.
Match the order of the old nodetool so that the native nodetool exhibits
the behavior expected by tests (and users too probably).
Fixes: scylladb/scylladb#18693Closesscylladb/scylladb#20615
We're going to remove the interface `data_dictionary::keyspace_element`.
As `schema::keyspace_name()` is an implementation of one of the methods
specified by that interface, we replace its uses by `schema::ks_name()`.
`schema::keyspace_name()` was an alias for it, so no semantic change
has occured.
This PR adds the possibility to gather resource consumption metrics. The collected metrics can be used to compare performance before and after specific changes aimed at increasing performance. Currently, this functionality works only in manual mode, and this is just raw data. Later on, these metrics can be used in Jupyter notebook to analyze and visualize how the resources are used and can provide the insight on how to improve it. This PR is a first insight after gathering these metrics.
Add the possibility to gather resource consumption for the test.py execution. SQLite DB will be created with different performance metrics that will allow comparing the resource consumption between changes.
The DB will be in the tmp directory that by default set to testlog. Across the runs, the DB will not be deleted, so each new run will just add information to the existing DB.
Parameter --get-metrics was added to switch on or off the metrics gathering. By default, it's switched on.
Closes: scylladb/qa-tasks#1666Closes: scylladb/qa-tasks#1707Closesscylladb/scylladb#19881
"crawling" is a little bit obscure in this context. so let's rename this class to reflect the fact that this reader only reads the entire content of the sstable.
both crawling reader for kl and mx formats are renamed. also, in order to be consistent, all "crawling reader" in variable names are updated as well.
---
it's a cleanup, hence no need to backport.
Closesscylladb/scylladb#20599
* github.com:scylladb/scylladb:
sstable: s/crawling_sstable_mutation_reader/sstable_full_scan_reader
sstable/mx/reader: add comment for mx_crawling_sstable_mutation_reader
"crawling" is a little bit obscure in this context. so let's rename this
class to reflect the fact that this reader only reads the entire content
of the sstable.
both crawling reader for kl and mx formats are renamed. also, in order
to be consistent, all "crawling reader" in variable names are updated
as well.
Signed-off-by: Kefu Chai <kefu.chai@scylladb.com>
Most of the tests work with local storage options. Some support S3
options as well. Whatever it is, when creating an sstable, tests need to
put proper "dir" on the options, this patch does so.
In fact, storage options for tests are created together with the
test-env, and ideally this is the place where dir should be assigned on
it. However, there are still places that explicitly specify path they
want to see sstables at, for those the new temporary options should be
constructed.
Signed-off-by: Pavel Emelyanov <xemul@scylladb.com>
Lost of code (in tools and tests) explicitly deal with local sstables
and need to create options for it. Currently default-constructing
options generates local ones, but without the directory path. Add a
helper that creates local options with path and patch callers.
Signed-off-by: Pavel Emelyanov <xemul@scylladb.com>
When purging regular tombstone consult the min_live_timestamp, if available.
This is safe since we don't need to protect dead data from resurrection, as it is already dead.
For shadowable_tombstones, consult the min_memtable_live_row_marker_timestamp,
if available, otherwise fallback to the min_live_timestamp.
If we see in a view table a shadowable tombstone with time T, then in any row where the row marker's timestamp is higher than T the shadowable tombstone is completely ignored and it doesn't hide any data in any column, so the shadowable tombstone can be safely purged without any effect or risk resurrecting any deleted data.
In other words, rows which might cause problems for purging a shadowable tombstone with time T are rows with row markers older or equal T. So to know if a whole sstable can cause problems for shadowable tombstone of time T, we need to check if the sstable's oldest row marker (and not oldest column) is older or equal T. And the same check applies similarly to the memtable.
If both extended timestamp statistics are missing, fallback to the legacy (and inaccurate) min_timestamp.
Fixesscylladb/scylladb#20423Fixesscylladb/scylladb#20424
> [!NOTE]
> no backport needed at this time
> We may consider backport later on after given some soak time in master/enterprise
> since we do see tombstone accumulation in the field under some materialized views workloads
Closesscylladb/scylladb#20446
* github.com:scylladb/scylladb:
cql-pytest: add test_compaction_tombstone_gc
sstable_compaction_test: add mv_tombstone_purge_test
sstable_compaction_test: tombstone_purge_test: test that old deleted data do not inhibit tombstone garbage collection
sstable_compaction_test: tombstone_purge_test: add testlog debugging
sstable_compaction_test: tombstone_purge_test: make_expiring: use next_timestamp
sstable, compaction: add debug logging for extended min timestamp stats
compaction: get_max_purgeable_timestamp: use memtable and sstable extended timestamp stats
compaction: define max_purgeable_fn
tombstone: can_gc_fn: move declaration to compaction_garbage_collector.hh
sstables: scylla_metadata: add ext_timestamp_stats
compaction_group, storage_group, table_state: add extended timestamp stats getters
sstables, memtable: track live timestamps
memtable_encoding_stats_collector: update row_marker: do nothing if missing
Since JMX server is deprecated, drop them from submodule, build system
and package definition.
Related scylladb/scylla-tools-java#370
Related #14856
Signed-off-by: Takuya ASADA <syuu@scylladb.com>
Closesscylladb/scylladb#17969
When we introduced optimized clang at 6e487a4, we dropped multiarch build on frozen toolchain, because building clang on QEMU emulation is too heavy.
Actually, even after the patch merged, there are two mode which does not build clang, --clang-build-mode INSTALL_FROM and --clang-build-mode SKIP.
So we should restore multiarch build only these mode, and keep skipping on INSTALL mode since it builds clang.
Since we apply multiarch on INSTALL_FROM mode, --clang-archive replaced
to --clang-archive-x86_64 and --clang-archive-aarch64.
Note that this breaks compatibility of existing clang archive, since it
changes clang root directory name from llvm-project to llvm-project-$ARCH.
Closes#20442Closesscylladb/scylladb#20444
before this change, we rely on `using namespace seastar` to use
`seastar::format()` without qualifying the `format()` with its
namespace. this works fine until we changed the parameter type
of format string `seastar::format()` from `const char*` to
`fmt::format_string<...>`. this change practically invited
`seastar::format()` to the club of `std::format()` and `fmt::format()`,
where all members accept a templated parameter as its `fmt`
parameter. and `seastar::format()` is not the best candidate anymore.
despite that argument-dependent lookup (ADT for short) favors the
function which is in the same namespace as its parameter, but
`using namespace` makes `seastar::format()` more competitive,
so both `std::format()` and `seastar::format()` are considered
as the condidates.
that is what is happening scylladb in quite a few caller sites of
`format()`, hence ADT is not able to tell which function the winner
in the name lookup:
```
/__w/scylladb/scylladb/mutation/mutation_fragment_stream_validator.cc:265:12: error: call to 'format' is ambiguous
265 | return format("{} ({}.{} {})", _name_view, s.ks_name(), s.cf_name(), s.id());
| ^~~~~~
/usr/bin/../lib/gcc/x86_64-redhat-linux/14/../../../../include/c++/14/format:4290:5: note: candidate function [with _Args = <const std::basic_string_view<char> &, const seastar::basic_sstring<char, unsigned int, 15> &, const seastar::basic_sstring<char, unsigned int, 15> &, const utils::tagged_uuid<table_id_tag> &>]
4290 | format(format_string<_Args...> __fmt, _Args&&... __args)
| ^
/__w/scylladb/scylladb/seastar/include/seastar/core/print.hh:143:1: note: candidate function [with A = <const std::basic_string_view<char> &, const seastar::basic_sstring<char, unsigned int, 15> &, const seastar::basic_sstring<char, unsigned int, 15> &, const utils::tagged_uuid<table_id_tag> &>]
143 | format(fmt::format_string<A...> fmt, A&&... a) {
| ^
```
in this change, we
change all `format()` to either `fmt::format()` or `seastar::format()`
with following rules:
- if the caller expects an `sstring` or `std::string_view`, change to
`seastar::format()`
- if the caller expects an `std::string`, change to `fmt::format()`.
because, `sstring::operator std::basic_string` would incur a deep
copy.
we will need another change to enable scylladb to compile with the
latest seastar. namely, to pass the format string as a templated
parameter down to helper functions which format their parameters.
to miminize the scope of this change, let's include that change when
bumping up the seastar submodule. as that change will depend on
the seastar change.
Signed-off-by: Kefu Chai <kefu.chai@scylladb.com>
This PR introduces a new file data source implementation for uncompressed SSTables that will be validating the checksum of each chunk that is being read. Unlike for compressed SSTables, checksum validation for uncompressed SSTables will be active for scrub/validate reads but not for normal user reads to ensure we will not have any performance regression.
It consists of:
* A new file data source for uncompressed SSTables.
* Integration of checksums into SSTable's shareable components. The validation code loads the component on demand and manages its lifecycle with shared pointers.
* A new `integrity_check` flag to enable the new file data source for uncompressed SSTables. The flag is currently enabled only through the validation path, i.e., it does not affect normal user reads.
* New scrub tests for both compressed and uncompressed SSTables, as well as improvements in the existing ones.
* A change in JSON response of `scylla validate-checksums` to report if an uncompressed SSTable cannot be validated due to lack of checksums (no `CRC.db` in `TOC.txt`).
Refs #19058.
New feature, no backport is needed.
Closesscylladb/scylladb#20207
* github.com:scylladb/scylladb:
test: Add test to validate SSTables with no checksums
tools: Fix typo in help message of scylla validate-checksums
sstables: Allow validate_checksums() to report missing checksums
test: Add test for concurrent scrub/validate operations
test: Add scrub/validate tests for uncompressed SSTables
test/lib: Add option to create uncompressed random schemas
test: Add test for scrub/validate with file-level corruption
test: Check validation errors in scrub tests
sstables: Enable checksum validation for uncompressed SSTables
sstables: Expose integrity option via crawling mutation readers
sstables: Expose integrity option via data_consume_rows()
sstables: Add option for integrity check in data streams
sstables: Remove unused variable
sstables: Add checksum in the SSTable components
sstables: Introduce checksummed file data source implementation
sstables: Replace assert with on_internal_error
