This instruction adds additional safety. The faster we notice that
a node didn't restart properly, the better.
The old gossip-based recovery procedure had a similar recommendation
to verify that each restarting node entered `RECOVERY` mode.
Fixes#25375
This is a documentation improvement. We should backport it to all
branches with the new recovery procedure, so 2025.2 and 2025.3.
Closesscylladb/scylladb#25376
(cherry picked from commit 7b77c6cc4a)
Closesscylladb/scylladb#25439
* Fix discovery of application default credentials by using fully expanded pathnames (no tildes).
* Fix grant type in token request with user credentials.
Fixes#25345.
- (cherry picked from commit 77cc6a7bad)
- (cherry picked from commit b1d5a67018)
Parent PR: #25351Closesscylladb/scylladb#25406
* github.com:scylladb/scylladb:
encryption: gcp: Fix the grant type for user credentials
encryption: gcp: Expand tilde in pathnames for credentials file
This patch sets, for alternator test suite, all 'alternator-*' loggers and 'paxos' logger to trace level. This should significantly ease debugging of failed tests, while it has no effect on test time and increases log size only by 7%.
This affects running alternator tests only with `test.py`, not with `test/alternator/run`.
Closes#24645Closesscylladb/scylladb#25327
(cherry picked from commit eb11485969)
Closesscylladb/scylladb#25382
TRUNCATE TABLE performs a memtable flush and then discards the sstables of the table being truncated. It collects the highest replay position for both of these. When the highest replay position of the discarded sstables is higher than the highest replay position of the flushed memtable, that means that we have had writes during truncate which have been flushed to disk independently of the truncate process. We check for this and trigger an on_internal_error() which throws an exception, informing the user that writing data concurrently with TRUNCATE TABLE is not advised.
The problem with this is that truncate is also called from DROP KEYSPACE and DROP TABLE. These are raft operations and exceptions thrown by them are caught by the (...) exception handler in the raft applier fiber, which then exits leaving the node without the ability to execute subsequent raft commands.
This commit changes the on_internal_error() into a warning log entry. It also outputs to keyspace/table names, and the offending replay positions which caused the check to fail.
This PR also adds a test which validates that TRUNCATE works correctly with concurrent writes. More specifically, it checks that:
- all data written before TRUNCATE starts is deleted
- none of the data after TRUNCATE completes is deleted
Fixes: #25173Fixes: #25013
Backport is needed in versions which check for truncate with concurrent writes using `on_internal_error()`: 2025.3 2025.2 2025.1
- (cherry picked from commit 268ec72dc9)
- (cherry picked from commit 33488ba943)
Parent PR: #25174Closesscylladb/scylladb#25349
* github.com:scylladb/scylladb:
truncate: add test for truncate with concurrent writes
truncate: change check for write during truncate into a log warning
The GCP host searches for application default credentials in known
locations within the user's home directory using
`seastar::file_exists()`. However, this function does not perform tilde
expansion in pathnames.
Replace tildes with the home directory from the HOME environment
variable.
Signed-off-by: Nikos Dragazis <nikolaos.dragazis@scylladb.com>
(cherry picked from commit 77cc6a7bad)
This PR adds an upgrade test for SSTable compression with shared dictionaries, and adds some bits to pylib and test.py to support that.
In the series, we:
1. Mount $XDG_CACHE_DIR into dbuild.
2. Add a pylib function which downloads and installs a released ScyllaDB package into a subdirectory of $XDG_CACHE_DIR/scylladb/test.py, and returns the path to bin/scylla.
3. Add new methods and params to the cluster manager, which let the test start nodes with historical Scylla executables, and switch executables during the test.
4. Add a test which uses the above to run an upgrade test between the released package and the current build.
5. Add --run-internet-dependent-tests to test.py which lets the user of test.py skip this test (and potentially other internet-dependent tests in the future).
(The patch modifying wait_for_cql_and_get_hosts is a part of the new test — the new test needs it to test how particular nodes in a mixed-version cluster react to some CQL queries.)
This is a follow-up to https://github.com/scylladb/scylladb/pull/23025, split into a separate PR because the potential addition of upgrade tests to test.py deserved a separate thread.
Needs backport to 2025.2, because that's where the tested feature is introduced.
Fixes https://github.com/scylladb/scylladb/issues/24110
- (cherry picked from commit 63218bb094)
- (cherry picked from commit cc7432888e)
- (cherry picked from commit 34098fbd1f)
- (cherry picked from commit 2ef0db0a6b)
- (cherry picked from commit 1ff7e09edc)
- (cherry picked from commit 5da19ff6a6)
- (cherry picked from commit d3cb873532)
- (cherry picked from commit dd878505ca)
Parent PR: https://github.com/scylladb/scylladb/pull/23538Closesscylladb/scylladb#25158
* github.com:scylladb/scylladb:
test: add test_sstable_compression_dictionaries_upgrade.py
test.py: add --run-internet-dependent-tests
pylib/manager_client: add server_switch_executable
test/pylib: in add_server, give a way to specify the executable and version-specific config
pylib: pass scylla_env environment variables to the topology suite
test/pylib: add get_scylla_2025_1_executable()
pylib/scylla_cluster: give a way to pass executable-specific options to nodes
dbuild: mount "$XDG_CACHE_HOME/scylladb"
`kmip_test_helper()` is a utility function to spawn a dedicated PyKMIP
server for a particular Boost test case. The function runs the server as
an external process and uses a thread to parse the port from the
server's logs. The thread communicates the port to the main thread via
a promise.
The current implementation has a bug where the thread may set a value
to the promise after its destruction, causing a segfault. This happens
when the server does not start within 20 seconds, in which case the port
future throws and the stack unwinding machinery destroys the port
promise before the thread that writes to it.
Fix the bug by declaring the promise before the cleanup action.
The bug has been encountered in CI runs on slow machines, where the
PyKMIP server takes too long to create its internal tables (due to slow
fdatasync calls from SQLite). This patch does not improve CI stability -
it only ensures that the error condition is properly reflected in the
test output.
This patch is not a backport. The same bug has been fixed in master as
part of a larger rewrite of the `kmip_test_helper()` (see 722e2bce96).
Refs #24747, #24842.
Fixes#24574.
Signed-off-by: Nikos Dragazis <nikolaos.dragazis@scylladb.com>
Closesscylladb/scylladb#25029
Some background:
When merge happens, a background fiber wakes up to merge compaction
groups of sibling tablets into main one. It cannot happen when
rebuilding the storage group list, since token metadata update is
not preemptable. So a storage group, post merge, has the main
compaction group and two other groups to be merged into the main.
When the merge happens, those two groups are empty and will be
freed.
Consider this scenario:
1) merge happens, from 2 to 1 tablet
2) produces a single storage group, containing main and two
other compaction groups to be merged into main.
3) take_storage_snapshot(), triggered by migration post merge,
gets a list of pointer to all compaction groups.
4) t__s__s() iterates first on main group, yields.
5) background fiber wakes up, moves the data into main
and frees the two groups
6) t__s__s() advances to other groups that are now freed,
since step 5.
7) segmentation fault
In addition to memory corruption, there's also a potential for
data to escape the iteration in take_storage_snapshot(), since
data can be moved across compaction groups in background, all
belonging to the same storage group. That could result in
data loss.
Readers should all operate on storage group level since it can
provide a view on all the data owned by a tablet replica.
The movement of sstable from group A to B is atomic, but
iteration first on A, then later on B, might miss data that
was moved from B to A, before the iteration reached B.
By switching to storage group in the interface that retrieves
groups by token range, we guarantee that all data of a given
replica can be found regardless of which compaction group they
sit on.
Fixes#23162.
Signed-off-by: Raphael S. Carvalho <raphaelsc@scylladb.com>
Closesscylladb/scylladb#24058
(cherry picked from commit 28056344ba)
Closesscylladb/scylladb#25338
The following steps are performed in sequence as part of the
Raft-based recovery procedure:
- set `recovery_leader` to the host ID of the recovery leader in
`scylla.yaml` on all live nodes,
- send the `SIGHUP` signal to all Scylla processes to reload the config,
- perform a rolling restart (with the recovery leader being restarted
first).
These steps are not intuitive and more complicated than they could be.
In this PR, we simplify these steps. From now on, we will be able to
simply set `recovery_leader` on each node just before restarting it.
Apart from making necessary changes in the code, we also update all
tests of the Raft-based recovery procedure and the user-facing
documentation.
Fixes scylladb/scylladb#25015
The Raft-based procedure was added in 2025.2. This PR makes the
procedure simpler and less error-prone, so it should be backported
to 2025.2 and 2025.3.
- (cherry picked from commit ec69028907)
- (cherry picked from commit 445a15ff45)
- (cherry picked from commit 23f59483b6)
- (cherry picked from commit ba5b5c7d2f)
- (cherry picked from commit 9e45e1159b)
- (cherry picked from commit f408d1fa4f)
Parent PR: #25032Closesscylladb/scylladb#25334
* github.com:scylladb/scylladb:
docs: document the option to set recovery_leader later
test: delay setting recovery_leader in the recovery procedure tests
gossip: add recovery_leader to gossip_digest_syn
db: system_keyspace: peers_table_read_fixup: remove rows with null host_id
db/config, gms/gossiper: change recovery_leader to UUID
db/config, utils: allow using UUID as a config option
Currently the service levels cache is unnecessarily updated in every
call of `topology_state_load()`.
But it is enough to reload it only when a snapshot is loaded.
(The cache is also already updated when there is a change to one of
`service_levels_v2`, `role_members`, `role_attributes` tables.)
Fixesscylladb/scylladb#25114Fixesscylladb/scylladb#23065Closesscylladb/scylladb#25116
(cherry picked from commit 10214e13bd)
Closesscylladb/scylladb#25304
We're enabling the configuration option `rf_rack_valid_keyspaces`
in all Python test suites. All relevant tests have been adjusted
to work with it enabled.
That encompasses the following suites:
* alternator,
* broadcast_tables,
* cluster (already enabled in scylladb/scylladb@ee96f8dcfc),
* cql,
* cqlpy (already enabled in scylladb/scylladb@be0877ce69),
* nodetool,
* rest_api.
Two remaining suites that use tests written in Python, redis and scylla_gdb,
are not affected, at least not directly.
The redis suite requires creating an instance of Scylla manually, and the tests
don't do anything that could violate the restriction.
The scylla_gdb suite focuses on testing the capabilities of scylla-gdb.py, but
even then it reuses the `run` file from the cqlpy suite.
Fixesscylladb/scylladb#25126Closesscylladb/scylladb#24617
(cherry picked from commit b41151ff1a)
Closesscylladb/scylladb#25230
test_validate_truncate_with_concurrent_writes checks if truncate deletes
all the data written before the truncate starts, and does not delete any
data after truncate completes.
(cherry picked from commit 33488ba943)
TRUNCATE TABLE performs a memtable flush and then discards the sstables
of the table being truncated. It collects the highest replay position
for both of these. When the highest replay position of the discarded
sstables is higher than the highest replay position of the flushed
memtable, that means that we have had writes during truncate which have
been flushed to disk independently of the truncate process. We check for
this and trigger an on_internal_error() which throws an exception,
informing the user that writing data concurrently with TRUNCATE TABLE is
not advised.
The problem with this is that truncate is also called from DROP KEYSPACE
and DROP TABLE. These are raft operations and exceptions thrown by them
are caught by the (...) exception handler in the raft applier fiber,
which then exits leaving the node without the ability to execute
subsequent raft commands.
This commit changes the on_internal_error() into a warning log entry. It
also outputs to keyspace/table names, the truncated_at timepoint, the
offending replay positions which caused the check to fail.
Fixes: #25173Fixes: #25013
(cherry picked from commit 268ec72dc9)
In one of the previous commits, we made it possible to set
`recovery_leader` on each node just before restarting it. Here, we
update the corresponding documentation.
(cherry picked from commit f408d1fa4f)
In the previous commit, we made it possible to set `recovery_leader`
on each node just before restarting it. Here, we change all the
tests of the Raft-based recovery procedure to use and test this option.
(cherry picked from commit 9e45e1159b)
In the new Raft-based recovery procedure, live nodes join the new
group 0 one by one during a rolling restart. There is a time window when
some of them are in the old group 0, while others are in the new group
0. This causes a group 0 mismatch in `gossiper::handle_syn_msg`. The
current solution for this problem is to ignore group 0 mismatches if
`recovery_leader` is set on the local node and to ask the administrator
to perform the rolling restart in the following way:
- set `recovery_leader` in `scylla.yaml` on all live nodes,
- send the `SIGHUP` signal to all Scylla processes to reload the config,
- proceed with the rolling restart.
This commit makes `gossiper::handle_syn_msg` ignore group 0 mismatches
when exactly one of the two gossiping nodes has `recovery_leader` set.
We achieve this by adding `recovery_leader` to `gossip_digest_syn`.
This change makes setting `recovery_leader` earlier on all nodes and
reloading the config unnecessary. From now on, the administrator can
simply restart each node with `recovery_leader` set.
However, note that nodes that join group 0 must have `recovery_leader`
set until all nodes join the new group 0. For example, assume that we
are in the middle of the rolling restart and one of the nodes in the new
group 0 crashes. It must be restarted with `recovery_leader` set, or
else it would reject `gossip_digest_syn` messages from nodes in the old
group 0. To avoid problems in such cases, we will continue to recommend
setting `recovery_leader` in `scylla.yaml` instead of passing it as
a command line argument.
(cherry picked from commit ba5b5c7d2f)
Currently, `peers_table_read_fixup` removes rows with no `host_id`, but
not with null `host_id`. Null host IDs are known to appear in system
tables, for example in `system.cluster_status` after a failed bootstrap.
We better make sure we handle them properly if they ever appear in
`system.peers`.
This commit guarantees that null UUID cannot belong to
`loaded_endpoints` in `storage_service::join_cluster`, which in
particular ensures that we throw a runtime error when a user sets
`recovery_leader` to null UUID during the recovery procedure. This is
handled by the code verifying that `recovery_leader` belongs to
`loaded_endpoints`.
(cherry picked from commit 23f59483b6)
We change the type of the `recovery_leader` config parameter and
`gossip_config::recovery_leader` from sstring to UUID. `recovery_leader`
is supposed to store host ID, so UUID is a natural choice.
After changing the type to UUID, if the user provides an incorrect UUID,
parsing `recovery_leader` will fail early, but the start-up will
continue. Outside the recovery procedure, `recovery_leader` will then be
ignored. In the recovery procedure, the start-up will fail on:
```
throw std::runtime_error(
"Cannot start - Raft-based topology has been enabled but persistent group 0 ID is not present. "
"If you are trying to run the Raft-based recovery procedure, you must set recovery_leader.");
```
(cherry picked from commit 445a15ff45)
The PyKMIP server uses an SQLite database to store artifacts such as
encryption keys. By default, SQLite performs a full journal and data
flush to disk on every CREATE TABLE operation. Each operation triggers
three fdatasync(2) calls. If we multiply this by 16, that is the number
of tables created by the server, we get a significant number of file
syncs, which can last for several seconds on slow machines.
This behavior has led to CI stability issues from KMIP unit tests where
the server failed to complete its schema creation within the 20-second
timeout (observed on spider9 and spider11).
Fix this by configuring the server to use an in-memory SQLite.
Fixes#24842.
Signed-off-by: Nikos Dragazis <nikolaos.dragazis@scylladb.com>
Closesscylladb/scylladb#24995
(cherry picked from commit 2656fca504)
Closesscylladb/scylladb#25299
Otherwise, tablet rebuilt will be delayed for up to 60s, as the tablet
scheduler needs load stats for the new node (replacing) to make
decisisons.
Fixes#25163Closesscylladb/scylladb#25181
(cherry picked from commit 55116ee660)
Closesscylladb/scylladb#25214
Right now, service levels are migrated in one group0 command and auth is migrated in the next one. This has a bad effect on the group0 state reload logic - modifying service levels in group0 causes the effective service levels cache to be recalculated, and to do so we need to fetch information about all roles. If the reload happens after SL upgrade and before auth upgrade, the query for roles will be directed to the legacy auth tables in system_auth - and the query, being a potentially remote query, has a timeout. If the query times out, it will throw an exception which will break the group0 apply fiber and the node will need to be restarted to bring it back to work.
In order to solve this issue, make sure that the service level module does not start populating and using the service level cache until both service levels and auth are migrated to raft. This is achieved by adding the check both to the cache population logic and the effective service level getter - they now look at service level's accessor new method, `can_use_effective_service_level_cache` which takes a look at the auth version.
Fixes: scylladb/scylladb#24963
Should be backported to all versions which support upgrade to topology over raft - the issue described here may put the cluster into a state which is difficult to get out of (group0 apply fiber can break on multiple nodes, which necessitates their restart).
- (cherry picked from commit 2bb800c004)
- (cherry picked from commit 3a082d314c)
Parent PR: #25188Closesscylladb/scylladb#25284
* github.com:scylladb/scylladb:
test: sl: verify that legacy auth is not queried in sl to raft upgrade
qos: don't populate effective service level cache until auth is migrated to raft
Adjust `test_service_levels_upgrade`: right before upgrade to topology
on raft, enable an error injection which triggers when the standard role
manager is about to query the legacy auth tables in the
system_auth keyspace. The preceding commit which fixes
scylladb/scylladb#24963 makes sure that the legacy tables are not
queried during upgrade to topology on raft, so the error injection does
not trigger and does not cause a problem; without that commit, the test
fails.
(cherry picked from commit 3a082d314c)
Right now, service levels are migrated in one group0 command and auth
is migrated in the next one. This has a bad effect on the group0 state
reload logic - modifying service levels in group0 causes the effective
service levels cache to be recalculated, and to do so we need to fetch
information about all roles. If the reload happens after SL upgrade and
before auth upgrade, the query for roles will be directed to the legacy
auth tables in system_auth - and the query, being a potentially remote
query, has a timeout. If the query times out, it will throw
an exception which will break the group0 apply fiber and the node will
need to be restarted to bring it back to work.
In order to solve this issue, make sure that the service level module
does not start populating and using the service level cache until both
service levels and auth are migrated to raft. This is achieved by adding
the check both to the cache population logic and the effective service
level getter - they now look at service level's accessor new method,
`can_use_effective_service_level_cache` which takes a look at the auth
version.
Fixes: scylladb/scylladb#24963
(cherry picked from commit 2bb800c004)
Note: The simplest approach to resolving `process_request_one` merge issues, since it has been refactored, was to include the three commits from before, and then the commits that are actually being backported.
`protocol_exception` is thrown in several places. This has become a performance issue, especially when starting/restarting a server. To alleviate this issue, throwing the exception has to be replaced with returning it as a result or an exceptional future.
This PR replaces throws in the `transport/server` module. This is achieved by using result_with_exception, and in some places, where suitable, just by creating and returning an exceptional future.
There are four commits in this PR. The first commit introduces tests in `test/cqlpy`. The second commit refactors transport server `handle_error` to not rethrow exceptions. The third commit refactors reusable buffer writer callbacks. The fourth commit replaces throwing `protocol_exception` to returning it.
Based on the comments on an issue linked in https://github.com/scylladb/scylladb/issues/24567, the main culprit from the side of protocol exceptions is the invalid protocol version one, so I tested that exception for performance.
In order to see if there is a measurable difference, a modified version of `test_protocol_version_mismatch` Python is used, with 100'000 runs across 10 processes (not threads, to avoid Python GIL). One test run consisted of 1 warm-up run and 5 measured runs. First test run has been executed on the current code, with throwing protocol exceptions. Second test urn has been executed on the new code, with returning protocol exceptions. The performance report is in https://github.com/scylladb/scylladb/pull/24738#issuecomment-3051611069. It shows ~10% gains in real, user, and sys time for this test.
Testing
Build: `release`
Test file: `test/cqlpy/test_protocol_exceptions.py`
Test name: `test_protocol_version_mismatch` (modified for mass connection requests)
Test arguments:
```
max_attempts=100'000
num_parallel=10
```
Throwing `protocol_exception` results:
```
real=1:26.97 user=10:00.27 sys=2:34.55 cpu=867%
real=1:26.95 user=9:57.10 sys=2:32.50 cpu=862%
real=1:26.93 user=9:56.54 sys=2:35.59 cpu=865%
real=1:26.96 user=9:54.95 sys=2:32.33 cpu=859%
real=1:26.96 user=9:53.39 sys=2:33.58 cpu=859%
real=1:26.95 user=9:56.85 sys=2:34.11 cpu=862% # average
```
Returning `protocol_exception` as `result_with_exception` or an exceptional future:
```
real=1:18.46 user=9:12.21 sys=2:19.08 cpu=881%
real=1:18.44 user=9:04.03 sys=2:17.91 cpu=869%
real=1:18.47 user=9:12.94 sys=2:19.68 cpu=882%
real=1:18.49 user=9:13.60 sys=2:19.88 cpu=883%
real=1:18.48 user=9:11.76 sys=2:17.32 cpu=878%
real=1:18.47 user=9:10.91 sys=2:18.77 cpu=879% # average
```
This PR replaced `transport/server` throws of `protocol_exception` with returns. There are a few other places where protocol exceptions are thrown, and there are many places where `invalid_request_exception` is thrown. That is out of scope of this single PR, so the PR just refs, and does not resolve issue #24567.
Refs: #24567
This PR improves performance in cases when protocol exceptions happen, for example during connection storms. It will require backporting.
* (cherry picked from commit 7aaeed012e)
* (cherry picked from commit 30d424e0d3)
* (cherry picked from commit 9f4344a435)
* (cherry picked from commit 5390f92afc)
* (cherry picked from commit 4a6f71df68)
Parent PR: #24738Closesscylladb/scylladb#25239
* github.com:scylladb/scylladb:
test/cqlpy: add cpp exception metric test conditions
transport/server: replace protocol_exception throws with returns
utils/reusable_buffer: accept non-throwing writer callbacks via result_with_exception
transport/server: avoid exception-throw overhead in handle_error
test/cqlpy: add protocol_exception tests
transport: remove redundant references in process_request_one
transport: fix the indentation in process_request_one
transport: add futures in CQL server exception handling
This commit:
- Extends the Drivers support table with information on which driver supports tablets
and since which version.
- Adds the driver support policy to the Drivers page.
- Reorganizes the Drivers page to accommodate the updates.
In addition:
- The CPP-over-Rust driver is added to the table.
- The information about Serverless (which we don't support) is removed
and replaced with tablets to correctly describe the contents of the table.
Fixes https://github.com/scylladb/scylladb/issues/19471
Refs https://github.com/scylladb/scylladb-docs-homepage/issues/69Closesscylladb/scylladb#24635
(cherry picked from commit 18b4d4a77c)
Closesscylladb/scylladb#25250
Tested code paths should not throw exceptions. `scylla_reactor_cpp_exceptions`
metric is used. This is a global metric. To address potential test flakiness,
each test runs multiple times:
- `run_count = 100`
- `cpp_exception_threshold = 10`
If a change in the code introduced an exception, expectation is that the number
of registered exceptions will be > `cpp_exception_threshold` in `run_count` runs.
In which case the test fails.
Fixes: #25272
(cherry picked from commit 4a6f71df68)
Replace throwing protocol_exception with returning it as a result
or an exceptional future in the transport server module. This
improves performance, for example during connection storms and
server restarts, where protocol exceptions are more frequent.
In functions already returning a future, protocol exceptions are
propagated using an exceptional future. In functions not already
returning a future, result_with_exception is used.
Notable change is checking v.failed() before calling v.get() in
process_request function, to avoid throwing in case of an
exceptional future.
Refs: #24567Fixes: #25272
(cherry picked from commit 5390f92afc)
Make make_bytes_ostream and make_fragmented_temporary_buffer accept
writer callbacks that return utils::result_with_exception instead of
forcing them to throw on error. This lets callers propagate failures
by returning an error result rather than throwing an exception.
Introduce buffer_writer_for, bytes_ostream_writer, and fragmented_buffer_writer
concepts to simplify and document the template requirements on writer callbacks.
This patch does not modify the actual callbacks passed, except for the syntax
changes needed for successful compilation, without changing the logic.
Refs: #24567Fixes: #25272
(cherry picked from commit 9f4344a435)
Previously, connection::handle_error always called f.get() inside a try/catch,
forcing every failed future to throw and immediately catch an exception just to
classify it. This change eliminates that extra throw/catch cycle by first checking
f.failed(), getting the stored std::exception_ptr via f.get_exception(), and
then dispatching on its type via utils::try_catch<T>(eptr).
The error-response logic is not changed - cassandra_exception, std::exception,
and unknown exceptions are caught and processed, and any exceptions thrown by
write_response while handling those exceptions continues to escape handle_error.
Refs: #24567Fixes: #25272
(cherry picked from commit 30d424e0d3)
Add a helper to fetch scylla_transport_cql_errors_total{type="protocol_error"} counter
from Scylla's metrics endpoint. These metrics are used to track protocol error
count before and after each test.
Add cql_with_protocol context manager utility for session creation with parameterized
protocol_version value. This is used for testing connection establishment with
different protocol versions, and proper disposal of successfully established sessions.
The tests cover two failure scenarios:
- Protocol version mismatch in test_protocol_version_mismatch which tests both supported
and unsupported protocol version
- Malformed frames via raw socket in _protocol_error_impl, used by several test functions,
and also test_no_protocol_exceptions test to assert that the error counters never decrease
during test execution, catching unintended metric resets
Refs: #24567Fixes: #25272
(cherry picked from commit 7aaeed012e)
The references were added and used in previous commits to
limit the number of line changes for a reviewer convenience.
This commit removes the redundant references to make the code
more clear and concise.
(cherry picked from commit 9b1f062827)
Fix the indentation after the previous commit that intentionally had
a wrong indent to limit the number of changed lines
(cherry picked from commit 9c0f369cf8)
Prepare for the next commit that will introduce a
seastar::sleep in handling of selected exception.
This commit:
- Rewrite cql_server::connection::process_request_one to use
seastar::futurize_invoke and try_catch<> instead of
utils::result_try.
- The intentation is intentionally incorrect to reduce the
number of changed lines. Next commits fix it.
(cherry picked from commit 8a7454cf3e)
Currently, progress of a parent task depends on expected_total_workload,
expected_children_number, and children progresses. Basically, if total
workload is known or all children have already been created, progresses
of children are summed up. Otherwise binary progress is returned.
As a result, two tasks of the same type may return progress in different
units. If they are children of the same task and this parent gathers the
progress - it becomes meaningless.
Drop expected_children_number as we can't assume that children are able
to show their progresses.
Modify get_progress method - progress is calculated based on children
progresses. If expected_total_workload isn't specified, the total
progress of a task may grow. If expected_total_workload isn't specified
and no children are created, empty progress (0/0) is returned.
Fixes: https://github.com/scylladb/scylladb/issues/24650.
Closesscylladb/scylladb#25113
(cherry picked from commit a7ee2bbbd8)
Closesscylladb/scylladb#25199
