In order for RAFT operations to use the gossip system semaphore, moving RAFT
verbs to the gossip group in `do_get_rpc_client_idx`, messaging_service.
Fixes scylladb/scylladb21637
Add two verbs needed to implement dictionary training for SSTable
compression.
SAMPLE_SSTABLES returns a list of randomly-selected chunks of Data files
with a given cardinality and using a given chunk size,
for the given table.
ESTIMATE_SSTABLE_VOLUME returns the total uncompressed size of all Data
files the given table.
Extend the `system.dicts` helper for querying and modifying
`system.dicts` with an ability to use names other than "general".
We will use that in later commits to publish dictionaries for SSTable compression.
During messaging_service object creation remove_rpc_client function may
be called if prefer_local snitch setting is true. The caller does not
provide host id, so _address_to_host_id_mapper is called to obtain it,
but at this point the function is not initialized yet.
The patch fixes the code to not call the function if not initialized.
This is not the problem since during messaging_service creation there
is no connection to drop.
Fixes: #23353
Message-ID: <Z-J2KbBK8NoFNYZZ@scylladb.com>
"
This is series starts conversion of the gossiper to use host ids to
index nodes. It does not touch the main map yet, but converts a lot of
internal code to host id. There are also some unrelated cleanups that
were done while working on the series. On of which is dropping code
related to old shadow round. We replaced shadow round with explicit
GOSSIP_GET_ENDPOINT_STATES verb in cd7d64f588
which is in scylla-4.3.0, so there should be no compatibility problem.
We already dropped a lot of old shadow round code in previous patches
anyway.
I tested manually that old and new node can co-exist in the same
cluster,
"
* 'gleb/gossiper-host-id-v2' of github.com:scylladb/scylla-dev: (33 commits)
gossiper: drop unneeded code
gossiper: move _expire_time_endpoint_map to host_id
gossiper: move _just_removed_endpoints to host id
gossiper: drop unused get_msg_addr function
messaging_service: change connection dropping notification to pass host id only
messaging_service: pass host id to remove_rpc_client in down notification
treewide: pass host id to endpoint_lifecycle_subscriber
treewide: drop endpoint life cycle subscribers that do nothing
load_meter: move to host id
treewide: use host id directly in endpoint state change subscribers
treewide: pass host id to endpoint state change subscribers
gossiper: drop deprecated unsafe_assassinate_endpoint operation
storage_service: drop unused code in handle_state_removed
treewide: drop endpoint state change subscribers that do nothing
gossiper: drop ip address from handle_echo_msg and simplify code since host_id is now mandatory
gossiper: start using host ids to send messages earlier
messaging_service: add temporary address map entry on incoming connection
topology_coordinator: notify about IP change from sync_raft_topology_nodes as well
treewide: move everyone to use host id based gossiper::is_alive and drop ip based one
storage_proxy: drop unused template
...
Do not iterate over all client indexed by hos id to search for those
with given IP. Look up by host id directly since now we know it in down
notification. In cases host id is not known look it up by ip.
We want to move to use host ids as soon as possible. Currently it is
possible only after the full gossiper exchange (because only at this
point gossiper state is added and with it address map entry). To make it
possible to move to host ids earlier this patch adds address map entries
on incoming communication during CLIENT_ID verb processing. The patch
also adds generation to CLIENT_ID to use it when address map is updated.
It is done so that older gossiper entries can be overwritten with newer
mapping in case of IP change.
Drop it from files that obviously don't need it. Also kill some forward
declarations while at it.
Signed-off-by: Pavel Emelyanov <xemul@scylladb.com>
Closesscylladb/scylladb#22979
File based stream is a new feature that optimizes tablet movement
significantly. It streams the entire SSTable files without deserializing
SSTable files into mutation fragments and re-serializing them back into
SSTables on receiving nodes. As a result, less data is streamed over the
network, and less CPU is consumed, especially for data models that
contain small cells.
The following patches are imported from the scylla enterprise:
*) Merge 'Introduce file stream for tablet' from Asias He
This patch uses Seastar RPC stream interface to stream sstable files on
network for tablet migration.
It streams sstables instead of mutation fragments. The file based
stream has multiple advantages over the mutation streaming.
- No serialization or deserialization for mutation fragments
- No need to read and process each mutation fragments
- On wire data is more compact and smaller
In the test below, a significant speed up is observed.
Two nodes, 1 shard per node, 1 initial_tablets:
- Start node 1
- Insert 10M rows of data with c-s
- Bootstrap node 2
Node 1 will migration data to node2 with the file stream.
Test results:
1) File stream: bytes on wire = 1132006250 bytes, bw = 836MB/s
[shard 0:stre] stream_blob - stream_sstables[eadaa8e0-a4f2-4cc6-bf10-39ad1ce106b0]
Finished sending sstable_nr=2 files_nr=18 files={} range=(-1,9223372036854775807] bytes_sent=1132006250 stream_bw=836MB/s
[shard 0:stre] storage_service - Streaming for tablet migration of a4f68900-568a-11ee-b7b9-c2b13945eed2:1 took 1.08004s seconds
2) Mutation stream: bytes on wire = 3030004736 bytes, bw = 125410.87 KiB/s = 128MB/s
[shard 0:stre] stream_session - [Stream #406dc8b0-56b5-11ee-bc2d-000bf4871058]
Streaming plan for Tablet migration-ks1-index-0 succeeded, peers={127.0.0.1}, tx=0 KiB, 0.00 KiB/s, rx=2958989 KiB, 125410.87 KiB/s
[shard 0:stre] storage_service - Streaming for tablet migration of a4f68900-568a-11ee-b7b9-c2b13945eed2:1 took 23.5992s seconds
Test Summary:
File stream v.s. Mutation stream improvements
- Stream bandwidth = 836 / 128 (MB/s) = 6.53X
- Stream time = 23.60 / 1.08 (Seconds) = 21.85X
- Stream bytes on wire = 3030004736 / 1132006250 (Bytes)= 2.67X
Closes scylladb/scylla-enterprise#3438
* github.com:scylladb/scylla-enterprise:
tests: Add file_stream_test
streaming: Implement file stream for tablet
*) streaming: Use new take_storage_snapshot interface
The new take_storage_snapshot returns a file object instead of a file
name. This allows the file stream sender to read from the file even if
the file is deleted by compaction.
Closes scylladb/scylla-enterprise#3728
*) streaming: Protect unsupported file types for file stream
Currently, we assume the file streamed over the stream_blob rpc verb is
a sstable file. This patch rejects the unsupported file types on the
receiver side. This allows us to stream more file types later using the
current file stream infrastructure without worrying about old nodes
processing the new file types in the wrong way.
- The file_ops::noop is renamed to file_ops::stream_sstables to be
explicit about the file types
- A missing test_file_stream_error_injection is added to the idl
Fixes: #3846
Tests: test_unsupported_file_ops
Closesscylladb/scylla-enterprise#3847
*) idl: Add service::session_id id to idl
It will be used in the next patch.
Refs #3907
*) streaming: Protect file stream with topology_guard
Similar to "storage_service, tablets: Use session to guard tablet
streaming", this patch protects file stream with topology_guard.
Fixes#3907
*) streaming: Take service topology_guard under the try block
Taking the service::topology_guard could throw. Currently, it throws
outside the try block, so the rpc sink will not be closed, causing the
following assertion:
```
scylla: seastar/include/seastar/rpc/rpc_impl.hh:815: virtual
seastar::rpc::sink_impl<netw::serializer,
streaming::stream_blob_cmd_data>::~sink_impl() [Serializer =
netw::serializer, Out = <streaming::stream_blob_cmd_data>]: Assertion
`this->_con->get()->sink_closed()' failed.
```
To fix, move more code including the topology_guard taking code to the
try block.
Fixes https://github.com/scylladb/scylla-enterprise/issues/4106Closesscylladb/scylla-enterprise#4110
*) Merge 'Preserve original SSTable state with file based tablet migration' from Raphael "Raph" Carvalho
We're not preserving the SSTable state across file based migration, so
staging SSTables for example are being placed into main directory, and
consequently, we're mixing staging and non-staging data, losing the
ability to continue from where the old replica left off.
It's expected that the view update backlog is transferred from old
into new replica, as migration doesn't wait for leaving replica to
complete view update work (which can take long). Elasticity is preferred.
So this fix guarantees that the state of the SSTable will be preserved
by propagating it in form of subdirectory (each subdirectory is
statically mapped with a particular state).
The staging sstables aren't being registered into view update generator
yet, as that's supposed to be fixed in OSS (more details can be found
at https://github.com/scylladb/scylladb/issues/19149).
Fixes#4265.
Closesscylladb/scylla-enterprise#4267
* github.com:scylladb/scylla-enterprise:
tablet: Preserve original SSTable state with file based tablet migration
sstables: Add get method for sstable state
*) sstable: (Re-)add shareabled_components getter
*) Merge 'File streaming sstables: Use sstable source/sink to transfer snapshots' from Calle Wilund
Fixes#4246
Alternative approach/better separation of concern, transport vs. sstable layer. Builds on #4472, but fancier.
Ensures we transfer and pre-process scylla metadata for streamed
file blobs first, then properly apply receiving nodes local config
by using a source and sink layer exported from sstables, which
handles things like ordering, metadata filtering (on source) as well
as handling metadata and proper IO paths when writing data on
receiver node (sink).
This implementation maintains the statelessness of the current
design, and the delegated sink side will re-read and re-write the
metadata for each component processed. This is a little wasteful,
but the meta is small, and it is less error prone than trying to do
caching cross-shards etc. The transport is isolated from the
knowledge.
This is an alternative/complement to #4436 and #4472, fixing the
underlying issue. Note that while the layers/API:s here allows easy
fixing of other fundamental problems in the feature (such as
destination location etc), these are not included in the PR, to keep
it as close to the current behaviour as possible.
Closesscylladb/scylla-enterprise#4646
* github.com:scylladb/scylla-enterprise:
raft_tests: Copy/add a topology test with encryption
file streaming: Use sstable source/sink to transfer snapshots
sstables: Add source and sink objects + producers for transfering a snapshot
sstable::types: Add remove accessor for extension info in metadata
*) The change for error injection in merge commit 966ea5955dd8760:
File streaming now has "stream_mutation_fragments" error injection points
so test_table_dropped_during_streaming works with file streaming.
*) doc: document file-based streaming
This commit adds a description of the file-based streaming feature to the documentation.
It will be displayed in the docs using the scylladb_include_flag directive after
https://github.com/scylladb/scylladb/pull/20182 is merged, backported to branch-6.0,
and, in turn, branch-2024.2.
Refs https://github.com/scylladb/scylla-enterprise/issues/4585
Refs https://github.com/scylladb/scylla-enterprise/issues/4254Closesscylladb/scylla-enterprise#4587
*) doc: move File-based streaming to the Tablets source file-based-streaming
This commit moves the description of file-based streaming from a common include file
to the regular doc source file where tablets are described.
Closesscylladb/scylla-enterprise#4652
*) streaming: sstable_stream_sink_impl: abort: prevent null pointer dereference
Closesscylladb/scylladb#22467
The repair_time in system.tablets will be updated when repair runs
successfully. We can now use it to update the repair time for tombstone
gc, i.e, when the system.tablets.repair_time is propagated, call
gc_state.update_repair_time() on the node that is the owner of the
tablet.
Since b3b3e880d3 ("repair: Reduce hints and batchlog flush"), the
repair time that could be used for tombstone gc might be smaller than
when the repair is started, so the actual repair time for tombstone gc
is returned by the repair rpc call from the repair master node.
Fixes#17507
New feature. No backport is needed.
Closesscylladb/scylladb#21896
* github.com:scylladb/scylladb:
repair: Stop using rpc to update repair time for repairs scheduled by scheduler
repair: Wire repair_time in system.tablets for tombstone gc
test: Disable flush_cache_time for two tablet repair tests
test: Introduce guarantee_repair_time_next_second helper
repair: Return repair time for repair_service::repair_tablet
service: Add tablet_operation.hh
File based stream is a new feature that optimizes tablet movement
significantly. It streams the entire SSTable files without deserializing
SSTable files into mutation fragments and re-serializing them back into
SSTables on receiving nodes. As a result, less data is streamed over the
network, and less CPU is consumed, especially for data models that
contain small cells.
The following patches are imported from the scylla enterprise:
*) Merge 'Introduce file stream for tablet' from Asias He
This patch uses Seastar RPC stream interface to stream sstable files on
network for tablet migration.
It streams sstables instead of mutation fragments. The file based
stream has multiple advantages over the mutation streaming.
- No serialization or deserialization for mutation fragments
- No need to read and process each mutation fragments
- On wire data is more compact and smaller
In the test below, a significant speed up is observed.
Two nodes, 1 shard per node, 1 initial_tablets:
- Start node 1
- Insert 10M rows of data with c-s
- Bootstrap node 2
Node 1 will migration data to node2 with the file stream.
Test results:
1) File stream: bytes on wire = 1132006250 bytes, bw = 836MB/s
[shard 0:stre] stream_blob - stream_sstables[eadaa8e0-a4f2-4cc6-bf10-39ad1ce106b0]
Finished sending sstable_nr=2 files_nr=18 files={} range=(-1,9223372036854775807] bytes_sent=1132006250 stream_bw=836MB/s
[shard 0:stre] storage_service - Streaming for tablet migration of a4f68900-568a-11ee-b7b9-c2b13945eed2:1 took 1.08004s seconds
2) Mutation stream: bytes on wire = 3030004736 bytes, bw = 125410.87 KiB/s = 128MB/s
[shard 0:stre] stream_session - [Stream #406dc8b0-56b5-11ee-bc2d-000bf4871058]
Streaming plan for Tablet migration-ks1-index-0 succeeded, peers={127.0.0.1}, tx=0 KiB, 0.00 KiB/s, rx=2958989 KiB, 125410.87 KiB/s
[shard 0:stre] storage_service - Streaming for tablet migration of a4f68900-568a-11ee-b7b9-c2b13945eed2:1 took 23.5992s seconds
Test Summary:
File stream v.s. Mutation stream improvements
- Stream bandwidth = 836 / 128 (MB/s) = 6.53X
- Stream time = 23.60 / 1.08 (Seconds) = 21.85X
- Stream bytes on wire = 3030004736 / 1132006250 (Bytes)= 2.67X
Closes scylladb/scylla-enterprise#3438
* github.com:scylladb/scylla-enterprise:
tests: Add file_stream_test
streaming: Implement file stream for tablet
*) streaming: Use new take_storage_snapshot interface
The new take_storage_snapshot returns a file object instead of a file
name. This allows the file stream sender to read from the file even if
the file is deleted by compaction.
Closes scylladb/scylla-enterprise#3728
*) streaming: Protect unsupported file types for file stream
Currently, we assume the file streamed over the stream_blob rpc verb is
a sstable file. This patch rejects the unsupported file types on the
receiver side. This allows us to stream more file types later using the
current file stream infrastructure without worrying about old nodes
processing the new file types in the wrong way.
- The file_ops::noop is renamed to file_ops::stream_sstables to be
explicit about the file types
- A missing test_file_stream_error_injection is added to the idl
Fixes: #3846
Tests: test_unsupported_file_ops
Closesscylladb/scylla-enterprise#3847
*) idl: Add service::session_id id to idl
It will be used in the next patch.
Refs #3907
*) streaming: Protect file stream with topology_guard
Similar to "storage_service, tablets: Use session to guard tablet
streaming", this patch protects file stream with topology_guard.
Fixes#3907
*) streaming: Take service topology_guard under the try block
Taking the service::topology_guard could throw. Currently, it throws
outside the try block, so the rpc sink will not be closed, causing the
following assertion:
```
scylla: seastar/include/seastar/rpc/rpc_impl.hh:815: virtual
seastar::rpc::sink_impl<netw::serializer,
streaming::stream_blob_cmd_data>::~sink_impl() [Serializer =
netw::serializer, Out = <streaming::stream_blob_cmd_data>]: Assertion
`this->_con->get()->sink_closed()' failed.
```
To fix, move more code including the topology_guard taking code to the
try block.
Fixes https://github.com/scylladb/scylla-enterprise/issues/4106Closesscylladb/scylla-enterprise#4110
*) Merge 'Preserve original SSTable state with file based tablet migration' from Raphael "Raph" Carvalho
We're not preserving the SSTable state across file based migration, so
staging SSTables for example are being placed into main directory, and
consequently, we're mixing staging and non-staging data, losing the
ability to continue from where the old replica left off.
It's expected that the view update backlog is transferred from old
into new replica, as migration doesn't wait for leaving replica to
complete view update work (which can take long). Elasticity is preferred.
So this fix guarantees that the state of the SSTable will be preserved
by propagating it in form of subdirectory (each subdirectory is
statically mapped with a particular state).
The staging sstables aren't being registered into view update generator
yet, as that's supposed to be fixed in OSS (more details can be found
at https://github.com/scylladb/scylladb/issues/19149).
Fixes#4265.
Closesscylladb/scylla-enterprise#4267
* github.com:scylladb/scylla-enterprise:
tablet: Preserve original SSTable state with file based tablet migration
sstables: Add get method for sstable state
*) sstable: (Re-)add shareabled_components getter
*) Merge 'File streaming sstables: Use sstable source/sink to transfer snapshots' from Calle Wilund
Fixes#4246
Alternative approach/better separation of concern, transport vs. sstable layer. Builds on #4472, but fancier.
Ensures we transfer and pre-process scylla metadata for streamed
file blobs first, then properly apply receiving nodes local config
by using a source and sink layer exported from sstables, which
handles things like ordering, metadata filtering (on source) as well
as handling metadata and proper IO paths when writing data on
receiver node (sink).
This implementation maintains the statelessness of the current
design, and the delegated sink side will re-read and re-write the
metadata for each component processed. This is a little wasteful,
but the meta is small, and it is less error prone than trying to do
caching cross-shards etc. The transport is isolated from the
knowledge.
This is an alternative/complement to #4436 and #4472, fixing the
underlying issue. Note that while the layers/API:s here allows easy
fixing of other fundamental problems in the feature (such as
destination location etc), these are not included in the PR, to keep
it as close to the current behaviour as possible.
Closesscylladb/scylla-enterprise#4646
* github.com:scylladb/scylla-enterprise:
raft_tests: Copy/add a topology test with encryption
file streaming: Use sstable source/sink to transfer snapshots
sstables: Add source and sink objects + producers for transfering a snapshot
sstable::types: Add remove accessor for extension info in metadata
*) The change for error injection in merge commit 966ea5955dd8760:
File streaming now has "stream_mutation_fragments" error injection points
so test_table_dropped_during_streaming works with file streaming.
*) doc: document file-based streaming
This commit adds a description of the file-based streaming feature to the documentation.
It will be displayed in the docs using the scylladb_include_flag directive after
https://github.com/scylladb/scylladb/pull/20182 is merged, backported to branch-6.0,
and, in turn, branch-2024.2.
Refs https://github.com/scylladb/scylla-enterprise/issues/4585
Refs https://github.com/scylladb/scylla-enterprise/issues/4254Closesscylladb/scylla-enterprise#4587
*) doc: move File-based streaming to the Tablets source file-based-streaming
This commit moves the description of file-based streaming from a common include file
to the regular doc source file where tablets are described.
Closesscylladb/scylla-enterprise#4652
*) streaming: sstable_stream_sink_impl: abort: prevent null pointer dereference
Closesscylladb/scylladb#22034
Now that all topology related code uses host ids there is not point to
maintain ip to id (and back) mappings in the token metadata. After the
patch the mapping will be maintained in the gossiper only. The rest of
the system will use host ids and in rare cases where translation is
needed (mostly for UX compatibility reasons) the translation will be
done using gossiper.
Fixes: scylladb/scylla#21777
* 'gleb/drop-ip-from-tm-v3' of github.com:scylladb/scylla-dev: (57 commits)
hint manager: do not translate ip to id in case hint manager is stopped already
locator: token_metadata: drop update_host_id() function that does nothing now
locator: topology: drop indexing by ips
repair: drop unneeded code
storage_service: use host_id to look for a node in on_alive handler
storage_proxy: translate ips to ids in forward array using gossiper
locator: topology: remove unused functions
storage_service: check for outdated ip in on_change notification in the peers table
storage_proxy: translate id to ip using address map in tablets's describe_ring code instead of taking one from the topology
topology coordinator: change connection dropping code to work on host ids
cql3: report host id instead of ip in error during SELECT FROM MUTATION_FRAGMENTS query
locator: drop unused function from tablet_effective_replication_map
api: view_build_statuses: do not use IP from the topology, but translate id to ip using address map instead
locator: token_metadata: remove unused ip based functions
locator: network_topology_strategy: use host_id based function to check number of endpoints in dcs
gossiper: drop get_unreachable_token_owners functions
storage_service: use gossiper to map ip to id in node_ops operations
storage_service: fix indentation after the last patch
storage_service: drop loops from node ops replace_prepare handling since there can be only one replacing node
token_metadata: drop no longer used functions
...
The repair_time in system.tablets will be updated when repair runs
successfully. We can now use it to update the repair time for tombstone
gc, i.e, when the system.tablets.repair_time is propagated, call
gc_state.update_repair_time() on the node that is the owner of the
tablet.
Since b3b3e880d3 ("repair: Reduce hints and batchlog flush"), the
repair time that could be used for tombstone gc might be smaller than
when the repair is started, so the actual repair time for tombstone gc
is returned by the repair rpc call from the repair master node.
Fixes#17507
We want to drop ips from token_metadata so move to use host id based
counterparts. Messaging service gets a function that maps from ips to id
when is starts listening.
While this isn't strictly needed for anything, messaging_service
is supposed to clear its RPC connection objects on stop,
for debuggability reasons.
But a recent change in this area broke that.
std::bind creates copies of its arguments, so the `m.clear()`
statement in stop_client() only clears a copy of the vector of shared pointers,
instead of clearing the original vector. This patch fixes that.
Fixes#22245Closesscylladb/scylladb#22333
these unused includes were identifier by clang-include-cleaner. after
auditing these source files, all of the reports have been confirmed.
please note, because quite a few source files relied on
`utils/to_string.hh` to pull in the specialization of
`fmt::formatter<std::optional<T>>`, after removing
`#include <fmt/std.h>` from `utils/to_string.hh`, we have to
include `fmt/std.h` directly.
Signed-off-by: Kefu Chai <kefu.chai@scylladb.com>
In order to make sure that the scheduling group carries over RPC, and
also to prevent priority inversion issues between different service
levels, modify the messaging service to use separate RPC connections for
each service level in order to serve user traffic.
The above is achieved by reusing the existing concept of "tenants" in
messaging service: when a new service level (or, more accurately,
service-level specific scheduling group) is first used in an RPC, a
new tenant is created.
In addition, extend the service level controller to be able to quickly
look up the service level name of the currently active scheduling group
in order to speed up the logic for choosing the tenant.
This patch sets up an `alien_worker`, `advanced_rpc_compression::tracker`,
`dict_sampler` and `dictionary_service` in `main()`, and wires them to each other
and to `messaging_service`.
`messaging_service` compresses its network traffic with compressors managed by
the `advanced_rpc_compression::tracker`. All this traffic is passed as a single
merged "stream" through `dict_sampler`.
`dictionary_service` has access to `dict_sampler`.
On chosen nodes (by default: the Raft leader), it uses the sampler to maintain
a random multi-megabyte sample of the sampler's stream. Every several minutes,
it copies the sample, trains a compression dictionary on it (by calling zstd's
training library via the `alien_worker` thread) and publishes the new dictionary
to `system.dicts` via Raft.
This update triggers a callback into `advanced_rpc_compression::tracker` on all nodes,
which updates the dictionary used by the compressors it manages.
This "service" is a bag for code responsible for dictionary training,
created to unclutter main() from dictionary-specific logic.
It starts the RPC dictionary training loop when the relevant cluster feature is enabled,
pauses and unpauses it appropriately whenever relevant config or leadership
status are updated, and publishes new dictionaries whenever the training fiber produces them.
In commit bfee93c7, repair verbs were moved to IDL. During this refactoring,
the `gc_clock.hh` header became unused as its references were relocated.
`clang-include-cleaner` helped identify this unnecessary include, which is
now removed to clean up the codebase.
Signed-off-by: Kefu Chai <kefu.chai@scylladb.com>
Closesscylladb/scylladb#21919
Store the endpoint ip address together with the client (note it may be
different from the address the client is connected to in case
preferable address is different). This allows up to drop lookup in the
address map which may eventually fail if an endpoint was already
deleted.
Fixes: scylladb/scylladb#21840
Message-ID: <Z1mpMMe-o0ggBU_F@scylladb.com>
"
The series moves node ops, repair and streaming verbs to IDL. Also
contains IDL related cleanups.
In addition to the CI tested manually by bootstrapping a node with the
series into a cluster of old nodes with repair and streaming both in
gossiper and raft mode. This exercises repair, streaming and node_ops
paths.
"
* 'gleb/move-more-rpcs-to-idl-v3' of github.com:scylladb/scylla-dev:
repair: repair_flush_hints_batchlog_request::target_nodes is not used any more, so mark it as such
streaming: move streaming verbs to IDL
messaging_service: move repair verbs to IDL
node_ops: move node_ops_cmd to IDL
idl: rename partition_checksum.dist.hh to repair.dist.hh
idl: move node_ops related stuff from the repair related IDL
This change introduces a new truncate_with_tablets RPC with a parameter
of type service::frozen_topology_guard. This is materialized on replica
nodes into a topology_guard which guarantees that truncate is performed
under a global session, which, in turn, makes sure that we don't execute
truncate as a result of stale RPCs.
Also, this RPC does not have a timeout. Timeout will be handled on the
coordinator side, and the truncate operation will not be allowed to time
out.
If an RPC client creation was triggered by send function that has host
id as a dst send it as part of CLIENT_ID RPC which is always the first
RPC on each connection. If receiver's host id does not match it will
drop the connection.
The function looks up provided host id in gossip_address_map and throws
unknown_address if the mapping is not available. Otherwise it sends the
message by IP found.
Mostly no functional changes here except in patch 3.
* 'gleb/cleanups' of github.com:scylladb/scylla-dev:
migration_manager: move migration manager verbs to the IDL
storage_proxy: remove unused function
storage_proxy: co-routinize handle_paxos_prepare
storage_proxy: co-routinise handle_paxos_prune
service: raft: no need to sync schema if the cluster is in raft topology mode
messaging_service: co-routinize messaging_service::stop_client
gossiper: rename apply_state_locally_without_listener_notification to apply_state_locally_in_shadow_round
Modernize the codebase by replacing Boost range adaptors with C++23 standard library views,
reducing external dependencies and leveraging modern C++ language features.
Key Changes:
- Replace `boost::adaptors::filtered` with `std::views::filter`
- Remove `#include <boost/range/adaptor/filtered.hpp>`
- Utilize standard library range views
Motivation:
- Reduce project's external dependency footprint
- Leverage standard library's range and view capabilities
- Improve long-term code maintainability
- Align with modern C++ best practices
Implementation Challenges and Considerations:
1. Range Conversion and Move Semantics
- `std::ranges::to` adaptor requires rvalue references
- Necessitated updates to variable and parameter constness
- Example: `cql3/restrictions/statement_restrictions.cc` modified to remove `const`
from `common` to enable efficient range conversion
2. Range Iteration and Mutation
- Range views may mutate internal state during iteration
- Cannot pass ranges by const reference in some scenarios
- Solution: Pass ranges by rvalue reference to explicitly indicate
state invalidation
Limitations:
- One instance of `boost::adaptors::filtered` temporarily preserved
due to lack of a C++23 alternative for `boost::join()`
- A comprehensive replacement will be addressed in a follow-up change
This change is part of our ongoing effort to modernize the codebase,
reducing external dependencies and adopting modern C++ practices.
Signed-off-by: Kefu Chai <kefu.chai@scylladb.com>
Closesscylladb/scylladb#21648
these unused includes are identified by clang-include-cleaner. after
auditing the source files, all of the reports have been confirmed.
Signed-off-by: Kefu Chai <kefu.chai@scylladb.com>
