In test_tablet_mv_replica_pairing_during_replace, after we create
the tables, we want to wait for their tablets to distribute evenly
across nodes and we have a wait_for for that.
But we don't await this wait_for, so it's a no-op. This patch fixes
it by adding the missing await.
Refs scylladb/scylladb#23982
Refs scylladb/scylladb#23997Closesscylladb/scylladb#24250
(cherry picked from commit 5074daf1b7)
Closesscylladb/scylladb#24311
In the test test_tablet_mv_replica_pairing_during_replace we stop 2 out of 4 servers while using RF=2.
Even though in the test we use exactly 4 tablets (1 for each replica of a base table and view), intially,
the tablets may not be split evenly between all nodes. Because of this, even when we chose a server that
hosts the view and a different server that hosts the base table, we sometimes stoped all replicas of the
base or the view table because the node with the base table replica may also be a view replica.
After some time, the tablets should be distributed across all nodes. When that happens, there will be
no common nodes with a base and view replica, so the test scenario will continue as planned.
In this patch, we add this waiting period after creating the base and view, and continue the test only
when all 4 tablets are on distinct nodes.
Fixes https://github.com/scylladb/scylladb/issues/23982
Fixes https://github.com/scylladb/scylladb/issues/23997Closesscylladb/scylladb#24111
(cherry picked from commit bceb64fb5a)
Closesscylladb/scylladb#24126
Currently, the base_info may or may not be set in view schemas.
Even when it's set, it may be modified. This necessitates extra
checks when handling view schemas, as we'll as potentially causing
errors when we forget to set it at some point.
Instead, we want to make the base info an immutable member of view
schemas (inside view_info). To achieve this, in this series we remove
all base_info members that can change due to a base schema update,
and we calculate the remaining values during view update generation,
using the most up-to-date base schema version.
To calculate the values that depend on the base schema version, we
need to iterate over the view primary key and find the corresponding
columns, which adds extra overhead for each batch of view updates.
However, this overhead should be relatively small, as when creating
a view update, we need to prepare each of its columns anyway. And
if we need to read the old value of the base row, the relative
overhead is even lower.
After this change, the base info in view schemas stays the same
for all base schema updates, so we'll no longer get issues with
base_info being incompatible with a base schema version. Additionally,
it's a step towards making the schema objects immutable, which
we sometimes incorrectly assumed in the past (they're still not
completely immutable yet, as some other fields in view_info other
than base_info are initialized lazily and may depend on the base
schema version).
Fixes https://github.com/scylladb/scylladb/issues/9059
Fixes https://github.com/scylladb/scylladb/issues/21292
Fixes https://github.com/scylladb/scylladb/issues/22194
Fixes https://github.com/scylladb/scylladb/issues/22410Closesscylladb/scylladb#23337
* github.com:scylladb/scylladb:
test: remove flakiness from test_schema_is_recovered_after_dying
mv: add a test for dropping an index while it's building
base_info: remove the lw_shared_ptr variant
view_info: don't re-set base_info after construction
base_info: remove base_info snapshot semantics
base_info: remove base schema from the base_info
schema_registry: store base info instead of base schema for view entries
base_info: make members non-const
view_info: move the base info to a separate header
view_info: move computation of view pk columns not in base pk to view_updates
view_info: move base-dependent variables into base_info
view_info: set base info on construction
This test shuts down a node and then replaces it with another one while
continuously writing to the cluster. The test has been observed to take
a lot of time in debug mode and time out on the replace operation.
Replace takes very long because rebuilding tablets on the new node is
very slow, and the slowest part is memtable flush which happens at the
beginning of streaming. The slowness seems to be specific to the debug
mode.
Turn off the test in debug mode to deflake the CI. As a follow-up, the
test is planned to be reworked into an quicker error injection test so
that the code path tested by this test will be again exercised in debug
unit tests (scylladb/scylladb#23898)
Fixes: scylladb/scylladb#20316Closesscylladb/scylladb#23900
Dropping an index is a schema change of its base table and
a schema drop of the index's materialized view. This combination
of schema changes used to cause issues during view building, because
when a view schema was dropped, it wasn't getting updated with the
new version of the base schema, and while the view building was
in progress, we would update the base schema for the base table
mutation reader and try generating updates with a view schema that
wasn't compatible with the base schema, failing on an `on_internal_error`.
In this patch we add a test for this scenario. We create an index,
halt its view building process using an injection, and drop it.
If no errors are thrown, the test succeeds.
The test was failing before https://github.com/scylladb/scylladb/pull/23337
and is passing afterwards.
The test populates a table with 50k rows, creates a view on that table
and then compares the time spent in streaming vs. gossip scheduling
groups. It only takes 10s in dev mode on my machine, but is much slower
in debug mode in CI - building the view doesn't finish within 2 minutes.
The bigger the view to build, the more accurrate the measurement;
moreover, the test scenario isn't interesting enough to be worth running
it in debug mode as this should be covered by other tests. Therefore,
just skip this test in debug mode.
Fixes: scylladb/scylladb#23862Closesscylladb/scylladb#23866
The test `test_mv_write_to_dead_node` currently uses a timeout of 60
seconds for remove_node, after it was increased from 30 seconds to fix
scylladb/scylladb#22953. Apparently it is still too low, and it was
observed to fail in debug mode.
Normally remove_node uses a default timeout of TOPOLOGY_TIMEOUT = 1000
seconds, but the test requires a timeout which is shorter than 5
minutes, because it is a regression test for an issue where MV updates
hold topology changes for more than 5 minutes, and we want to verify in
the test that the topology change completes in less than 5 minutes.
To resolve the issue, we set the test to skip in debug mode, because the
remove node operation is unpredictably slow, and we increase the timeout
to 180 seconds which is hopefully enough time for remove_node in
non-debug modes, and still sufficient to satisfy the test requirements.
Fixesscylladb/scylladb#22530Closesscylladb/scylladb#23833
This series add a new config option: `tablets_mode_for_new_keyspaces` that replaces the existing
`enable_tablets` option. It can be set to the following values:
disabled: New keyspaces use vnodes by default, unless enabled by the tablets={'enabled':true} option
enabled: New keyspaces use tablets by default, unless disabled by the tablets={'disabled':true} option
enforced: New keyspaces must use tablets. Tablets cannot be disabled using the CREATE KEYSPACE option
`tablets_mode_for_new_keyspaces=disabled` or `tablets_mode_for_new_keyspaces=enabled` control whether
tablets are disabled or enabled by default for new keyspaces, respectively.
In either cases, tablets can be opted-in or out using the `tablets={'enabled':...}`
keyspace option, when the keyspace is created.
`tablets_mode_for_new_keyspaces=enforced` enables tablets by default for new keyspaces,
like `tablets_mode_for_new_keyspaces=enabled`.
However, it does not allow to opt-out when creating
new keyspaces by setting `tablets = {'enabled': false}`
Refs scylladb/scylla-enterprise#4355
* Requires backport to 2025.1
Closesscylladb/scylladb#22273
* github.com:scylladb/scylladb:
boost/tablets_test: verify failure to create keyspace with tablets and non network replication strategy
tablets: enforce tablets using tablets_mode_for_new_keyspaces=enforced config option
db/config: add tablets_mode_for_new_keyspaces option
The new option deprecates the existing `enable_tablets` option.
It will be extended in the next patch with a 3rd value: "enforced"
while will enable tablets by default for new keyspace but
without the posibility to opt out using the `tablets = {'enabled':
false}` keyspace schema option.
Signed-off-by: Benny Halevy <bhalevy@scylladb.com>
This fixes an issue where materialized view tablets are not split
because they are not registered as split candidates by the storage
service.
The code in storage_service::replicate_to_all_cores was changed in
4bfa3060d0 to handle normal tables and view tables separately, but with
that change register_tablet_split_candidate is applied only to normal
tables and not every table like before. We fix it by registering view
tables as well.
We add a test to verify that split of MV tables works.
Closesscylladb/scylladb#23335
