To be used by sstable_writer for stats collection.
Note that this patch is factored out so it can be verified with no
other change in functionality.
Signed-off-by: Benny Halevy <bhalevy@scylladb.com>
Commit d6b0c4dda4 changed the built-in default
murmur3_ignore_msb_bits to 12 (from 0) and removed the scylla.yaml default.
Removal of the scylla.yaml default was a mistake for two reasons:
- if someone downgrades a cluster, keeping scylla.yaml derived from the
master branch, they will experience resharding since the built-in default,
which has changed, will take effect. While that scenario is not supported,
it already happened and caused much consternation.
- if, in the future, we wish to change the default, we will cause resharding
again. Embedding the default in scylla.yaml allows us to change the default
for new clusters while allowing upgraded clusters to retain older values.
Therefore, this patch restores murmur3_ignore_msb_bits in scylla.yaml. Future
changes to the configuration item should change both scylla.yaml and the
built-in default.
Message-Id: <20180930090053.21136-1-avi@scylladb.com>
Reusable buffers are meant to be used when protocol or third-party
library limiations force us to allocate large contiguous buffers. There
isn't much that can be done about this so there is little point in
warning about that.
Fixes#3788.
Message-Id: <20180928085141.6469-1-pdziepak@scylladb.com>
In commit 4a0b561376, "storage_service:
Get rid of moving operation", we removed remove_from_moving() in
update_normal_tokens(). However, remove_from_moving() calls
invalidate_cached_rings(). We should call invalidate_cached_rings() in
update_normal_tokens(), otherwise we will get wrong token range to
address map in the token_metadata cache.
This issue exists in master only. It is not in any of the releases.
Message-Id: <c03f2ed478cfdb84494f36dce9a8cfc05ed9e0cd.1538288364.git.asias@scylladb.com>
When validating assignment between two types, it's possible one of
them is wrapped in a reverse_type, if it comes, for example, from the
type associated with a clustering column. When checking for weak
assignment the types are correctly unwrapped, but not when checking
for an exact match, which this patch fixes.
Technically, the receiver is never a reversed_type for the current
callers, but this is the morally correct implementation, as the type
being reversed or not plays no role in assignment.
Tests: unit(release)
Fixes#3789
Signed-off-by: Duarte Nunes <duarte@scylladb.com>
Message-Id: <20180927223201.28152-1-duarte@scylladb.com>
We have found issues when a flush is requested outside the usual
memtable flush loop and because there is not a lot of data the
controller will not have a high amount of shares.
To prevent this, this patch guarantees some minimum amount of shares
when extraneous operations (nodetool flush, commitlog-driven flush, etc)
are requested.
Another option would be to add shares instead of guarantee a minimum.
But in my view the approach I am taking here has two main advantages:
1) It won't cause spikes when those operations are requested
2) It is cumbersome to add shares in the current infrastructure, as just
adding backlog can cause shares to spike. Consider this example:
Backlog is within the first range of very low backlog (~0.2). Shares
for this would be around ~20. If we want to add 200 shares, that is
equivalent to a backlog of 0.8. Once we add those two backlogs
together, we end up with 1 (max backlog).
Fixes#3761
Tests: unit (release)
Signed-off-by: Glauber Costa <glauber@scylladb.com>
Message-Id: <20180927131904.8826-1-glauber@scylladb.com>
This patchset addresses multiple errors in normalizing_reader
implementation found during review.
I have decided to not make a clustering key full inside
before_key()/after_key() helpers. The reason is that for this they
would need schema to be passed as another parameter so existing
methods don't suit. OTOH, introducing new members for a class using
for testing purposes only seems an overkill.
* github.com/argenet/scylla.git projects/sstables-30/normalizing_reader_fixes/v1:
range_tombstone: Add constructor accepting position_in_partition_views
for range bounds.
tests: Make sure range tombstone is properly split over rows with
non-full keys.
tests: Multiple fixes for draining and clearing range tombstones in
normalizing_reader.
We only wait from the last test case, so if an individual test is executed,
a memory leak may be reported.
Fix by waiting from all test cases.
Message-Id: <20180926203723.18026-1-avi@scylladb.com>
When executing a prepared select statement with a multicolumn IN, the
system returned incorrect results due to a memory violation (a bytes view
referring to an out of scope bytes object).
Added test for the prepared statement results correctness.
Tests:
1. unit (release) with the new test.
2. Python script.
Signed-off-by: Eliran Sinvani <eliransin@scylladb.com>
Message-Id: <36c9cf9ed3fe72e3b4801e3cd120678429ce218a.1537947897.git.eliransin@scylladb.com>
"
This patchset fixes several issues in SSTables 3.x ('mc') writing and
parsing and extends existing SSTables unit tests to cover the new
format.
The only test enabled temporarily is check_multi_schema because it
turned out that reading SSTables 3.x with a different schema has not
been implemented in full. This will be addressed in a separate patchset.
This patchset depends on the "Support SSTables 3.x in Scylla runtime"
patchset.
Tests: unit {release}
"
* 'projects/sstables-30/unit-tests/v3' of https://github.com/argenet/scylla: (25 commits)
tests: Enable existing SSTables tests for 'mc' format.
tests: Fix test_wrong_range_tombstone_order for 'mc' format.
tests: Extend reader assertions to check clustering keys made full.
tests: Disable test_old_format_non_compound_range_tombstone_is_read for 'mc' format.
tests: Disable check_multi_schema for 'mc' format.
tests: Fix test_promoted_index_read for 'mc' format by using normalizing_reader.
tests: Fix promoted_index_read to not rely on a specific index length
tests: Add 'mc' files for test_wrong_range_tombstone_order
tests: Add 'mc' files for test_wrong_counter_shard_order
tests: Add 'mc' files for summary_test
tests: Add 'mc' files for test_promoted_index_read
tests: Add 'mc' files for test_partition_skipping
tests: Add 'mc' files for large_partition tests (promoted_index_read, sub_partition_read, sub_partitions_read
tests: Add 'mc' files for test_counter_read
tests: Add 'mc' files for test_broken_promoted_index_is_skipped
tests: SSTables 'mc' files for sliced_mutation_reads_test.
tests: Introduce normalizing_reader helper for SSTables tests.
mutation_fragment: Add range_tombstone_stream::empty() method.
sstables: Make key full when setting a range tombstone start from end open marker.
sstables: For 'mc' format, use excl_start when split an RT over a row with a full key.
...
"
This patchset makes it possible to use SSTables 'mc' format, commonly
referred to as 'SSTables 3.x', when running Scylla instance.
Several bugs found on this way are fixed. Also, a configuration option
is introduced to allow running Scylla either with 'mc' or 'la' format
as default.
Tests: unit {release}
+ tested Scylla with both 'la' and 'mc' formats to work fine:
cqlsh> CREATE KEYSPACE test WITH replication = {'class': 'SimpleStrategy', 'replication_factor': 1}; [3/1890]
cqlsh> USE test;
cqlsh:test> CREATE TABLE cfsst3 (pk int, ck int, rc int, PRIMARY KEY (pk, ck)) WITH compression = {'sstable_compression': ''};
cqlsh:test> INSERT INTO cfsst3 (pk, ck, rc) VALUES ( 4, 7, 8);
<<flush>>
cqlsh:test> DELETE from cfsst3 WHERE pk = 4 and ck> 3 and ck < 8;
<<flush>>
cqlsh:test> INSERT INTO cfsst3 (pk, ck) VALUES ( 2, 3);
cqlsh:test> INSERT INTO cfsst3 (pk, ck) VALUES ( 4, 6);
cqlsh:test> SELECT * FROM cfsst3 ;
pk | ck | rc
----+----+------
2 | 3 | null
4 | 6 | null
(2 rows)
<<Scylla restart>>
cqlsh:test> INSERT INTO cfsst3 (pk, ck) VALUES ( 5, 7);
cqlsh:test> INSERT INTO cfsst3 (pk, ck) VALUES ( 6, 8);
cqlsh:test> INSERT INTO cfsst3 (pk, ck) VALUES ( 7, 9);
cqlsh:test> INSERT INTO cfsst3 (pk, ck) VALUES ( 8, 10);
cqlsh:test> SELECT * from cfsst3 ;
pk | ck | rc
----+----+------
5 | 7 | null
8 | 10 | null
2 | 3 | null
4 | 6 | null
7 | 9 | null
6 | 8 | null
(6 rows)
"
* 'projects/sstables-30/try-runtime/v8' of https://github.com/argenet/scylla:
database: Honour enable_sstables_mc_format configuration option.
sstables: Support SSTables 'mc' format as a feature.
db: Add configuration option for enabling SSTables 'mc' format.
tests: Add test for reading a complex column with zero subcolumns (SST3).
sstables: Fix parsing of complex columns with zero subcolumns.
sstables: Explicitly cast api::timestamp_type to uint64_t when delta-encoding.
sstables: Use parser_type instead of abstract_type::parse_type in column_translation.
bytes: Add helper for turning bytes_view into sstring_view.
sstables: Only forward the call to fast_forwarding_to in mp_row_consumer_m if filter exists.
sstables: Fix string formatting for exception messages in m_format_read_helpers.
sstables: Don't validate timestamps against the max value on parsing.
sstables: Always store only min bases in serialization_header.
sstables: Support 'mc' version parsing from filename.
SST3: Make sure we call consume_partition_end
This test is not applicable to the 'mc' format as it covers a backward
compatibility case which may only occur with SSTables generated by older
Scylla versions in 'ka' format.
Signed-off-by: Vladimir Krivopalov <vladimir@scylladb.com>
This is a helper flat_mutation_reader that wraps another reader and
splits range tombstones over rows before emitting them.
It is used to produce the same mutation streams for both old (ka/la) and
new (mc) SSTables formats in unit tests.
Signed-off-by: Vladimir Krivopalov <vladimir@scylladb.com>
This fixes the monotonicity issue as otherwise the range tombstone
emitted after such clustering row has a start position that should be
ordered before that of the row.
Signed-off-by: Vladimir Krivopalov <vladimir@scylladb.com>
If we go past the slice to be read with a range tombstone being opened
we need to emit an RT corresponding to this slice.
Signed-off-by: Piotr Jastrzebski <piotr@scylladb.com>
Only enable SSTables 'mc' format if the entire cluster supports it and
it is enabled in the configuration file.
Signed-off-by: Vladimir Krivopalov <vladimir@scylladb.com>
