The patch implements:
- /storage_service/auto_compaction API endpoint
- /column_family/autocompaction/{name} API endpoint
Those APIs allow to control and request the status of background
compaction jobs for the existing tables.
The implementation introduces the table::_compaction_disabled_by_user.
Then the CompactionManager checks if it can push the background
compaction job for the corresponding table.
New members
===
table::enable_auto_compaction();
table::disable_auto_compaction();
bool table::is_auto_compaction_disabled_by_user() const
Test
===
Tests: unit(sstable_datafile_test autocompaction_control_test), manual
$ ninja build/dev/test/boost/sstable_datafile_test
$ ./build/dev/test/boost/sstable_datafile_test --run_test=autocompaction_control_test -- -c1 -m2G --overprovisioned --unsafe-bypass-fsync 1 --blocked-reactor-notify-ms 2000000
The test tries to submit a compaction job after playing
with autocompaction control table switch. However, there is
no reliable way to hook pending compaction task. The code
assumed that with_scheduling_group() closure will never
preempt execution of the stats check.
Revert
===
Reverts commit c8247ac. In previous version the execution
sometimes resulted into the following error:
test/boost/sstable_datafile_test.cc(1076): fatal error: in "autocompaction_control_test":
critical check cm->get_stats().pending_tasks == 1 || cm->get_stats().active_tasks == 1 has failed
This version adds a few sstables to the cf, starts
the compaction and awaits until it is finished.
API change
===
- `/column_family/autocompaction/` always returned `true` while answering to the question: if the autocompaction disabled (see https://github.com/scylladb/scylla-jmx/blob/master/src/main/java/org/apache/cassandra/db/ColumnFamilyStore.java#L321). now it answers to the question: if the autocompaction for specific table is enabled. The question logic is inverted. The patch to the JMX is required. However, the change is decent because all old values were invalid (it always reported all compactions are disabled).
- `/column_family/autocompaction/` got support for POST/DELETE per table
Fixes
===
Fixes#1488Fixes#1808Fixes#440
Signed-off-by: Ivan Prisyazhnyy <ivan@scylladb.com>
Reviewed-by: Glauber Costa <glauber@scylladb.com>
The single-key sstable reader uses the clustering ranges from the slice
to determine the upper bound of the disk read-range using the index.
For this is simply uses the end bound of the last clustering ranges. For
reverse reads however the clustering ranges in the slice are in reverse
order, so this will in fact be the upper bound of the smallest range.
Depending on whether the distance between the clustering range is big
enough for the sstable reader to use the index to skip between them,
this will lead to either reading too little data or an assert failure.
This patch fixes the problematic function `get_slice_upper_bound()` to
consider reverse reads as well.
Initially I thought there will be more mishandling of reverse slices,
but actually `mutation_fragment_filter`, the component doing the actual
slicing of rows, is already reverse-slice aware.
A unit test which reproduces the assert failure is also added.
Fixes: #6171
Signed-off-by: Botond Dénes <bdenes@scylladb.com>
Message-Id: <20200507114956.271799-1-bdenes@scylladb.com>
"
Garbage collected SSTables, created by incremental compaction process,
are being added to the SSTable set using a function that invalidates
row cache using the range of the SSTable itself. That's incorrect
because data in GC SSTables come from preexisting SSTables in set,
meaning the state of data isn't changed and so no need for
invalidation at all. Incorrect invalidation like this is a source of
read performance issues. This problem is fixed by including GC
SSTables to the descriptor which is used to specify changes to the
SSTable set, which is the correct thing to do given that a midway
failure could leave the set in an incorrect state.
Fixes#5956.
Fixes#6275.
tests: unit(dev)
"
* 'fix_issue_5956_v4' of github.com:raphaelsc/scylla:
sstables/compaction: Don't invalidate row cache when adding GC SSTable to SSTable set
sstables/compaction: Change meaning of compaction_completion_desc input and output fields
sstables/compaction: Clean up code around garbage_collected_sstable_writer
The shutdown process of compaction manager starts with an explicit call
from the database object. However that can only happen everything is
already initialized. This works well today, but I am soon to change
the resharding process to operate before the node is fully ready.
One can still stop the database in this case, but reshardings will
have to finish before the abort signal is processed.
This patch passes the existing abort source to the construction of the
compaction_manager and subscribes to it. If the abort source is
triggered, the compaction manager will react to it firing and all
compactions it manages will be stopped.
We still want the database object to be able to wait for the compaction
manager, since the database is the object that owns the lifetime of
the compaction manager. To make that possible we'll use a future
that is return from stop(): no matter what triggered the abort, either
an early abort during initial resharding or a database-level event like
drain, everything will shut down in the right order.
The abort source is passed to the database, who is responsible from
constructing the compaction manager.
Tests: unit (dev), manual start+stop, manual drain + stop
Signed-off-by: Glauber Costa <glauber@scylladb.com>
Message-Id: <20200506184749.98288-1-glauber@scylladb.com>
This is unrelated to counters, but happens to fix#4209
`tuple::delayed_value::contains_bind_marker` used to check that
ALL terms are bound (not that ANY of them is bound). As a result,
scylla would crash in prepare codepath for collections of tuples.
After this fix `invalid_request_exception` is thrown instead.
* jul-stas-4209-crash-on-counter-shards-set:
boost/tests: test for bound variable in a list of tuple literals
cql3: fix detection of bound variables in tuples
Add a couple of cql tests regarding conditional batches:
1. Verify that "delete" takes priority over "insert"
when applied to the same row within the same batch.
2. Test that a workaround for the issue works as expected (i.e.
delete only individual cells instead of the full record).
Tests: unit(dev)
Fixes: #6273
Signed-off-by: Pavel Solodovnikov <pa.solodovnikov@scylladb.com>
Message-Id: <20200506201200.176590-1-pa.solodovnikov@scylladb.com>
fmt, the formatting library we use, detects types with conversion
to std::string_view (and formats them as strings) and types that
support operator<<(std::ostream, const T&) (and performs custom
formatting on them). However, if <fmt/ostream.h>, the latter is
not done.
The problem happens with seastar::sstring, which implements both,
and debug mode, which disables inlining. Some translation units
do include <fmt/ostream.h>, and so generate code to do custom
formatting. exception_utils.cc doesn't, and so generates code
to format via string_view conversion. At link time, the
compiler picks one of the generated functions and includes it
in the final binary; it happened to pick one generated outside
exception_utils.cc, using custom formatting.
However, there is also code in fmt to encode which path fmt
chose - string_view or custom. This code is constexpr and so
is evaluated in exception_utils.cc. The result is that the
function to perform formatting of seastar::sstring uses custom
formatting, while the descriptor containing the method used
says it is formatting via string_view. This is enough to cause
a crash.
The problem is limited to debug mode, since in other modes
all this code is inlined, and so is consistent within the
translation unit.
We need a more general fix (hopefully in fmt), but for now a
simple fix is to add the missing include.
Ref https://github.com/fmtlib/fmt/issues/1662
"
CDC has to create CDC streams that are co-located with corresponding BaseTable data. This is not always easy. Especially for small vnodes. This PR introduces new partitioner which allows us to easily find such stream ids that the stream belongs to a given vnode and shard.
The idea is that a partitioner accepts only keys that are a blob composed of two int64 numbers. The first number is the token of the key.
Tests: unit(dev), dtests(CDC)
"
* haaawk-cdc_partitioner:
cdc:use CDCPartitioner for CDC Log
dht: Add find_first_token_for_shard
dht: use long_token in token::to_int64
cdc: add CDCPartitioner
stream_id: add token_from_bytes static function
i_partitioner: Stop distinguishing whether keys order is preserved
This patch adds a comprehensive, hopefully complete, test for the
yet-unimplemented FilterExpression feature. FilterExpression is the
modern syntax which allows filtering the results of Query and Scan requests.
The patch includes 50 tests spanning more than 700 lines of code,
testing (hopefully) all the various FilterExpression features,
sub-cases, syntax peculiarities, and so on.
As usual, all included tests pass when run against DynamoDB
("pytest --aws") and xfail when run against Scylla.
This test should be helpful to understand how to implement
FilterExpression correctly, as well as test the future implementation.
Refs #5038.
Signed-off-by: Nadav Har'El <nyh@scylladb.com>
Message-Id: <20200503165639.15320-1-nyh@scylladb.com>
Garbage collected SSTable is incorrectly added to SSTable set with a function
that invalidates row cache. This problem is fixed by adding GC SStable
to set using mechanism which replaces old sstables with new sstables.
Also, adding GC SSTable to set in a separate call is not correct.
We should make sure that GC SSTable reaches the SSTable set at the same time
its respective old (input) SSTable is removed from the set, and that's done
using a single request call to table.
Fixes#5956.
Fixes#6275.
Signed-off-by: Raphael S. Carvalho <raphaelsc@scylladb.com>
input_sstables is renamed to old_sstables and is about old SSTables that should be
deleted and removed from the SSTable set.
output_sstables is renamed to new_sstables and is about new SSTable that should be
added to the SSTable set, replacing the old ones.
This will allow us, for example, to add auxiliary SSTables to SSTable set using
the same call which replaces output SSTables by input SSTables in compaction.
Signed-off-by: Raphael S. Carvalho <raphaelsc@scylladb.com>
Currently, the test seems to use the tmpdir class in a wrong way,
just to get a path to a temporary directory.
It should keep the tmpdir object around for the duration of the test
so the temporary directory will be automatically removed when the test
completes.
Refs #6344
Signed-off-by: Benny Halevy <bhalevy@scylladb.com>
Message-Id: <20200504153810.202218-1-bhalevy@scylladb.com>
Maximum item depth accepted by DynamoDB is 32, and alternator
chose 39 as its arbitrary value in order to provide 7 shining
new levels absolutely free of charge. Unfortunately, our code
which checks the nesting level in rapidjson parsing bumps
the counter by 2 for every object, which is due to rapidjson's
internal implementation. In order to actually support
at least 32 levels, the threshold is simply doubled.
This commit comes with a test case which ensures that
32-nested items are accepted both by alternator and DynamoDB.
The test case failed for alternator before the fix.
Fixes#6366
Tests: unit(dev), alternator(local, remote)
Right now the compaction_manager needs to be started explicitly.
We may change it in the future, but right now that's how it is.
Everything works now even without it, because compaction_manager::stop
happens to work even if it was not started. But it is technically
illegal.
Signed-off-by: Glauber Costa <glauber@scylladb.com>
Message-Id: <20200504143048.17201-1-glauber@scylladb.com>
"
Fixes#6067
Makes the scylla endpoint initializations that support TLS use reloadable certificate stores, watching used cert + key files for changes, and reload iff modified.
Tests in separate dtest set.
"
* elcallio-calle/reloadable-tls:
transport: Use reloadable tls certificates
redis: Use reloadable tls certificates
alternator: Use reloadable tls certificates
messaging_service: Use reloadable TLS certificates
Changes messaging service rpc to use reloadable tls
certificates iff tls is enabled-
Note that this means that the service cannot start
listening at construction time if TLS is active,
and user need to call start_listen_ex to initialize
and actually start the service.
Since "normal" messaging service is actually started
from gms, this route too is made a continuation.
The compaction_manager test lives inside a thread and it is not taking
advantage of it, with continuations all over.
One of the side effects of it is that the test is calling stop() twice
on the compaction_manager. While this works today, it is not good
practice. A change I am making is just about to break it.
This patch converts the test to fully use .get() instead of chained
continuations and in doing so also guarantees that the compaction
manager will be RAII-stopped just one, from a defer object.
Signed-off-by: Glauber Costa <glauber@scylladb.com>
Message-Id: <20200503161420.8346-2-glauber@scylladb.com>
Loading SSTables from the main directory is possible, to be compatible with
Cassandra, but extremely dangerous and not recommended.
From the beginning, we recommend using an separate, upload/ directory.
In all this time, perhaps due to how the feature's usefulness is reduced
in Cassandra due to the possible races, I have never seen anyone coming
from Cassandra doing procedures involving refresh at all.
Loading SSTables from the main directory forces us to disable writes to
the table temporarily until the SSTables are sorted out. If we get rid of
this, we can get rid of the disabling of the writes as well.
We can't do it now because if we want to be nice to the odd user that may
be using refresh through the main directory without our knowledge we should
at least error out.
This patch, then, does that: it errors out if SSTables are found in the main
directory. It will not proceed with the refresh, and direct the user to the
upload directory.
The main loop in reshuffle_sstables is left in place structurally for now, but
most of it is gone. The test for is is deleted.
After a period of deprecation we can start ignoring these SSTables and get rid
of the lock.
Signed-off-by: Glauber Costa <glauber@scylladb.com>
Message-Id: <20200429144511.13681-1-glauber@scylladb.com>
"
This series fix hang in multishard_writer when error happens. It contains
- multishard_writer: Abort the queue attached to consumers when producer fails
- repair: Fix hang when the writer is dead
Fixes#6241
Refs: #6248
"
* asias-stream_fix_multishard_writer_hang:
repair: Fix hang when the writer is dead
mutation_writer_test: Add test_multishard_writer_producer_aborts
multishard_writer: Abort the queue attached to consumers when producer fails
The alternator test, test/alternator/run, runs Scylla and runs the
various tests against it. Before this patch, just booting Scylla took
about 26 seconds (for a dev build, on my laptop). This patch reduces
this delay to less than one second!
It turns out that almost the entire delay was artificial, two periods
of 12 seconds "waiting for the gossip to settle", which are completely
unnecessary in the one-node cluster used in the Alternator test.
So a simple "--skip-wait-for-gossip-to-settle 0" parameter eliminates
these long delays completely.
Amusingly, the Scylla boot is now so fast, that I had to change a "sleep 2"
in the test script to "sleep 1", because 2 seconds is now much more than
it takes to boot Scylla :-)
Fixes#6310.
Signed-off-by: Nadav Har'El <nyh@scylladb.com>
Message-Id: <20200428145035.22894-1-nyh@scylladb.com>
The ScanIndexForward parameter is now fully implemented
and can accept ScanIndexForward=false in order to query
the partitions in reverse clustering order.
Note that reading partition slices in reverse order is less
efficient than forward scans and may put a strain on memory
usage, especially for large partitions, since the whole partition
is currently fetched in order to be reversed.
Fixes#5153
1. Remove the `versioned_value::factory` class, it didn't add any value. It just
forced us to create an object for making `versioned_value`s, for no sensible
reason.
2. Move some `versioned_value` deserialization code (string -> internal data
structures) into the versioned_value module. Previously, it was scattered all
around the place.
3. Make `gossiper::get_seeds` const and return a const reference.
I needed these refactors for a PR I was preparing to fix an issue with CDC. The
attempt of fixing the issue failed (I'm trying something different now), but the
refactors might be useful anyway.
* kbr--vv-refactor:
gossiper: make `get_seeds` method const and return a const ref
versioned_value: remove versioned_value::factory class
gms: move TOKENS string deserialization code into versioned_value
that code doesn't run under a thread, so let's futurize it.
the code worked with single cpu because get() returns right away
due to no deferring point.
Signed-off-by: Raphael S. Carvalho <raphaelsc@scylladb.com>
Message-Id: <20200427155303.82763-1-raphaelsc@scylladb.com>
Queries with `ALLOW FILTERING` and constraints on counter
values used to be rejected as "unimplemented". The reason
was a missing tri-comparator, which is added in this patch.
Fixes#5635
* jul-stas-5635-filtering-on-counters:
cql/tests: Added test for filtering on counter columns
counters: add comparator and remove `unimplemented` from restrictions
We want to test that a std::bad_alloc is thrown, but GCC 10 has a new
optimization (-fallocation-dce) that removes dead allocations.
This patch assigns the value returned by new to a global so that GCC
cannot delete it.
With this all tests in a dev build pass with GCC 10.
Signed-off-by: Rafael Ávila de Espíndola <espindola@scylladb.com>
Message-Id: <20200424201531.225807-1-espindola@scylladb.com>
The Alternator test boots Scylla to test against it. We set an arbitrary
timeout for this boot to succeed: 100 seconds. This 100 seconds is
significantly more than 25 seconds it takes on my laptop, and I though
we'll never reach it. But it turns out that in some setups - running the
very slow debug build on slow and overcommitted nodes - 100 seconds is
not enough.
So this patch doubles the timeout to 200 seconds.
Note that this "200 seconds" is just a timeout, and doesn't affect normal
runs: Both a successful boot and a failed boot are recognized as soon as
they happen, and we never unnecessarily wait the entire 200 seconds.
Fixes#6271.
Signed-off-by: Nadav Har'El <nyh@scylladb.com>
Message-Id: <20200422193920.17079-1-nyh@scylladb.com>
Parallel scans can be performed by providing Segment and TotalSegments
attributes to Scan request, which can be used to split the work among
many workers.
This test makes the parallel scan test succeed, so the xfail is removed.
Fixes#5059
The constructor of `read_command` is used both by IDL and clients in the
code. However, this constructor has a parameter that is not used by IDL:
`read_timestamp`. This requires that this parameter is the very last in
the list and that new parameters that are used by IDL are added before
it. One such new parameter was `bool is_first_page`. Adding this
parameter right before the read timestamp one created a situation where
the last parameter (read_timestamp) implicitly converts to the one
before it (is_first_page). This means that some call sites passing
`read_timestamp` were now silently converting this to `is_first_page`,
effectively dropping the timestamp.
This patch aims to rectify this, while also avoiding similar accidents
in the future, by making `is_first_page` a `bool_class` which doesn't
have any implicit convertions defined. This change does not break the
ABI as `bool_class` is also sent as a `bool` on the wire.
Signed-off-by: Botond Dénes <bdenes@scylladb.com>
Tests: unit(dev)
Message-Id: <20200422073657.87241-1-bdenes@scylladb.com>
Currently, the alternator tests configure scylla to use all the
logical cores in the host system, but only 1GB of RAM. This can lead
to a small amount of memory per core.
It also uses the default disk configuration, which is safe, but can be
very slow on mechanical or non-enterprise disks.
Change to use a fixed --smp 2 configuration, and add --overprovisioned
for maximum flexibility (no spinning). Use --unsafe-bypass-fsync
for faster performance on non-enterprise or mechanical disks, assuming
that the test data is not important.
Fixes#6251.
Message-Id: <20200420154112.123386-1-avi@scylladb.com>
Merged patch series from Piotr Sarna:
This series allows reading rows from Scylla's system tables
via alternator by using a virtual interface.
If a Query or Scan request intercepts a table name with the following
pattern: .scylla.alternator.KEYSPACE_NAME.TABLE_NAME, it will read
the data from Scylla's KEYSPACE_NAME.TABLE_NAME table.
The interface is expected to only return data for Scylla system tables
and trying to access regular tables via this interface is expected
to return an error.
This series comes with tests (alternator-test, scylla_only).
Fixes#6122
Tests: alternator-test(local,remote (to verify that scylla_only works)
Piotr Sarna (5):
alternator: add fallback serialization for all types
alternator: add fetching static columns if they exist
alternator: add a way of accessing system tables from alternator
alternator-test: add scylla-only test for querying system tables
docs: add an entry about accessing Scylla system tables
alternator-test/test_system_tables.py | 61 +++++++++++++++++++++++++++
alternator/executor.cc | 38 ++++++++++++++++-
alternator/executor.hh | 1 +
alternator/serialization.cc | 11 +++--
docs/alternator/alternator.md | 15 +++++++
5 files changed, 122 insertions(+), 4 deletions(-)
create mode 100644 alternator-test/test_system_tables.py
"
Includes:
- code cleanups
- support for measuring data stores with more than one partition
- measure sstable footprint for all supported formats
- less verbose mode by default
"
* tag 'memory-footprint-test-improvement-v2' of github.com:tgrabiec/scylla:
test: memory_footprint: Silence logging by default
test: memory_footprint: Introduce --partition-count option
test: memory_footprint: Run under a cql_test_env
test: memory_footprint: Calculate sstable size for each format version
sstables: Move all_sstable_versions to version.hh
Some legacy `mc` SSTables (created in Scylla 3.0) may contain incorrect
serialization headers, which don't wrap frozen UDTs nested inside collections
with the FrozenType<...> tag. When reading such SSTable,
Scylla would detect a mismatch between the schema saved in schema
tables (which correctly wraps UDTs in the FrozenType<...> tag) and the schema
from the serialization header (which doesn't have these tags).
SSTables created in Scylla versions 3.1 and above, in particular in
Scylla versions that contain this commit, create correct serialization
headers (which wrap UDTs in the FrozenType<...> tag).
This commit does two things:
1. for all SSTables created after this commit, include a new feature
flag, CorrectUDTsInCollections, presence of which implies that frozen
UDTs inside collections have the FrozenType<...> tag.
2. when reading a Scylla SSTable without the feature flag, we assume that UDTs
nested inside collections are always frozen, even if they don't have
the tag. This assumption is safe to be made, because at the time of
this commit, Scylla does not allow non-frozen (multi-cell) types inside
collections or UDTs, and because of point 1 above.
There is one edge case not covered: if we don't know whether the SSTable
comes from Scylla or from C*. In that case we won't make the assumption
described in 2. Therefore, if we get a mismatch between schema and
serialization headers of a table which we couldn't confirm to come from
Scylla, we will still reject the table. If any user encounters such an
issue (unlikely), we will have to use another solution, e.g. using a
separate tool to rewrite the SSTable.
Fixes#6130.
There is no reason to read a single SSTable at a time from the staging
directory. Moving SSTables from staging directory essentially involves
scanning input SSTables and creating new SSTables (albeit in a different
directory).
We have a mechanism that does that: compactions. In a follow up patch, I
will introduce a new specialization of compaction that moves SSTables
from staging (potentially compacting them if there are plenty).
In preparation for that, some signatures have to be changed and the
view_updating_consumer has to be more compaction friendly. Meaning:
- Operating with an sstable vector
- taking a table reference, not a database
Because this code is a bit fragile and the reviewer set is fundamentally
different from anything compaction related, I am sending this separately
* glommer-view_build:
staging: potentially read many SSTables at the same time
view_build_test: make sure it works with smp > 1
This test doesn't work with higher smp counts, because it relies on
dealing with keys named 'a' and 'b' and creates SSTables containing one
of them manually. This throws an exception if we happen to execute on
a shard that don't own the tokens corresponding to those keys.
This patch avoids that problem by pre-selecting keys that we know to
belong to the current shard in which the test is executed.
Signed-off-by: Glauber Costa <glauber@scylladb.com>
