The `drain` method, cancels all running compactions and moves the
compaction manager into the disabled state. To move it back to
the enabled state, the `enable` method shall be called.
This, however, throws an assertion error as the submission time is
not cancelled and re-enabling the manager tries to arm the armed timer.
Thus, cancel the timer, when calling the drain method to disable
the compaction manager.
Fixes https://github.com/scylladb/scylladb/issues/24504
All versions are affected. So it's a good candidate for a backport.
Closesscylladb/scylladb#24505
(cherry picked from commit a9a53d9178)
Closesscylladb/scylladb#24585
test_repair_task_progress checks the progress of children of root
repair task. However, nothing ensures that the children are
already created.
Wait until at least one child of a root repair task is created.
Fixes: #24556.
Closesscylladb/scylladb#24560
(cherry picked from commit 0deb9209a0)
Closesscylladb/scylladb#24652
The purpose of this test that the cluster is able to boot up again after
a full cluster shutdown, thus exhibiting no issues when connecting to
raft group 0 that is larger than one.
(cherry picked from commit 900a6706b8)
This change implements the ability to await superuser creation in the
function ensure_superuser_is_created(). This means that Scylla will not
be serving CQL connections until the superuser is created.
Fixes#10481
(cherry picked from commit 7008b71acc)
This change is a preparation for the next change. Moving to coroutines
makes the code more readable and easier to process.
(cherry picked from commit 04fc82620b)
This change reorganizes the way standard_role_manager startup is
handled: now the future returned by its start() function can be used to
determine when startup has finished. We use this future to ensure the
startup is finished prior to starting the CQL server.
Some clusters are created without auth, and auth is added later. The
first node to recognize that auth is needed must create the superuser.
Currently this is always on restart, but if we were to ever make it
LiveUpdate then it would not be on restart.
This suggests that we don't really need to wait during restart.
This is a preparatory commit, laying ground for implementation of a
start() function that waits for the superuser to be created. The default
implementation returns a ready future, which makes no change in the code
behavior.
(cherry picked from commit f525d4b0c1)
`dirty_memory_manager` tracks two quantities about memtable memory usage:
"real" and "unspooled" memory usage.
"real" is the total memory usage (sum of `occupancy().total_space()`)
by all memtable LSA regions, plus a upper-bound estimate of the size of
memtable data which has already moved to the cache region but isn't
evictable (merged into the cache) yet.
"unspooled" is the difference between total memory usage by all memtable
LSA regions, and the total flushed memory (sum of `_flushed_memory`)
of memtables.
`dirty_memory_manager` controls the shares of compaction and/or blocks
writes when these quantities cross various thresholds.
"Total flushed memory" isn't a well defined notion,
since the actual consumption of memory by the same data can vary over
time due to LSA compactions, and even the data present in memtable can
change over the course of the flush due to removals of outdated MVCC versions.
So `_flushed_memory` is merely an approximation computed by `flush_reader`
based on the data passing through it.
This approximation is supposed to be a conservative lower bound.
In particular, `_flushed_memory` should be not greater than
`occupancy().total_space()`. Otherwise, for example, "unspooled" memory
could become negative (and/or wrap around) and weird things could happen.
There is an assertion in `~flush_memory_accounter` which checks that
`_flushed_memory < occupancy().total_space()` at the end of flush.
But it can fail. Without additional treatment, the memtable reader sometimes emits
data which is already deleted. (In particular, it emites rows covered by
a partition tombstone in a newer MVCC version.)
This data is seen by `flush_reader` and accounted in `_flushed_memory`.
But this data can be garbage-collected by the `mutation_cleaner` later during the
flush and decrease `total_memory` below `_flushed_memory`.
There is a piece of code in `mutation_cleaner` intended to prevent that.
If `total_memory` decreases during a `mutation_cleaner` run,
`_flushed_memory` is lowered by the same amount, just to preserve the
asserted property. (This could also make `_flushed_memory` quite inaccurate,
but that's considered acceptable).
But that only works if `total_memory` is decreased during that run. It doesn't
work if the `total_memory` decrease (enabled by the new allocator holes made
by `mutation_cleaner`'s garbage collection work) happens asynchronously
(due to memory reclaim for whatever reason) after the run.
This patch fixes that by tracking the decreases of `total_memory` closer to the
source. Instead of relying on `mutation_cleaner` to notify the memtable if it
lowers `total_memory`, the memtable itself listens for notifications about
LSA segment deallocations. It keeps `_flushed_memory` equal to the reader's
estimate of flushed memory decreased by the change in `total_memory` since the
beginning of flush (if it was positive), and it keeps the amount of "spooled"
memory reported to the `dirty_memory_manager` at `max(0, _flushed_memory)`.
Fixes scylladb/scylladb#21413
Backport candidate because it fixes a crash that can happen in existing stable branches.
- (cherry picked from commit 7d551f99be)
- (cherry picked from commit 975e7e405a)
Parent PR: #21638Closesscylladb/scylladb#24601
* github.com:scylladb/scylladb:
memtable: ensure _flushed_memory doesn't grow above total memory usage
replica/memtable: move region_listener handlers from dirty_memory_manager to memtable
dirty_memory_manager tracks two quantities about memtable memory usage:
"real" and "unspooled" memory usage.
"real" is the total memory usage (sum of `occupancy().total_space()`)
by all memtable LSA regions, plus a upper-bound estimate of the size of
memtable data which has already moved to the cache region but isn't
evictable (merged into the cache) yet.
"unspooled" is the difference between total memory usage by all memtable
LSA regions, and the total flushed memory (sum of `_flushed_memory`)
of memtables.
dirty_memory_manager controls the shares of compaction and/or blocks
writes when these quantities cross various thresholds.
"Total flushed memory" isn't a well defined notion,
since the actual consumption of memory by the same data can vary over
time due to LSA compactions, and even the data present in memtable can
change over the course of the flush due to removals of outdated MVCC versions.
So `_flushed_memory` is merely an approximation computed by `flush_reader`
based on the data passing through it.
This approximation is supposed to be a conservative lower bound.
In particular, `_flushed_memory` should be not greater than
`occupancy().total_space()`. Otherwise, for example, "unspooled" memory
could become negative (and/or wrap around) and weird things could happen.
There is an assertion in ~flush_memory_accounter which checks that
`_flushed_memory < occupancy().total_space()` at the end of flush.
But it can fail. Without additional treatment, the memtable reader sometimes emits
data which is already deleted. (In particular, it emites rows covered by
a partition tombstone in a newer MVCC version.)
This data is seen `flush_reader` and accounted in `_flushed_memory`.
But this data can be garbage-collected by the mutation_cleaner later during the
flush and decrease `total_memory` below `_flushed_memory`.
There is a piece of code in mutation_cleaner intended to prevent that.
If `total_memory` decreases during a `mutation_cleaner` run,
`_flushed_memory` is lowered by the same amount, just to preserve the
asserted property. (This could also make `_flushed_memory` quite inaccurate,
but that's considered acceptable).
But that only works if `total_memory` is decreased during that run. It doesn't
work if the `total_memory` decrease (enabled by the new allocator holes made
by `mutation_cleaner`'s garbage collection work) happens asynchronously
(due to memory reclaim for whatever reason) after the run.
This patch fixes that by tracking the decreases of `total_memory` closer to the
source. Instead of relying on `mutation_cleaner` to notify the memtable if it
lowers `total_memory`, the memtable itself listens for notifications about
LSA segment deallocations. It keeps `_flushed_memory` equal to the reader's
estimate of flushed memory decreased by the change in `total_memory` since the
beginning of flush (if it was positive), and it keeps the amount of "spooled"
memory reported to the `dirty_memory_manager` at `max(0, _flushed_memory)`.
(cherry picked from commit 975e7e405a)
The memtable wants to listen for changes in its `total_memory` in order
to decrease its `_flushed_memory` in case some of the freed memory has already
been accounted as flushed. (This can happen because the flush reader sees
and accounts even outdated MVCC versions, which can be deleted and freed
during the flush).
Today, the memtable doesn't listen to those changes directly. Instead,
some calls which can affect `total_memory` (in particular, the mutation cleaner)
manually check the value of `total_memory` before and after they run, and they
pass the difference to the memtable.
But that's not good enough, because `total_memory` can also change outside
of those manually-checked calls -- for example, during LSA compaction, which
can occur anytime. This makes memtable's accounting inaccurate and can lead
to unexpected states.
But we already have an interface for listening to `total_memory` changes
actively, and `dirty_memory_manager`, which also needs to know it,
does just that. So what happens e.g. when `mutation_cleaner` runs
is that `mutation_cleaner` checks the value of `total_memory` before it runs,
then it runs, causing several changes to `total_memory` which are picked up
by `dirty_memory_manager`, then `mutation_cleaner` checks the end value of
`total_memory` and passes the difference to `memtable`, which corrects
whatever was observed by `dirty_memory_manager`.
To allow memtable to modify its `_flushed_memory` correctly, we need
to make `memtable` itself a `region_listener`. Also, instead of
the situation where `dirty_memory_manager` receives `total_memory`
change notifications from `logalloc` directly, and `memtable` fixes
the manager's state later, we want to only the memtable listen
for the notifications, and pass them already modified accordingl
to the manager, so there is no intermediate wrong states.
This patch moves the `region_listener` callbacks from the
`dirty_memory_manager` to the `memtable`. It's not intended to be
a functional change, just a source code refactoring.
The next patch will be a functional change enabled by this.
(cherry picked from commit 7d551f99be)
When an sstable is identified by sstable_directory as remote-unshared,
it will at some point be moved to the target shard. When it happens a
log-message appears:
sstable_directory - Moving 1 unshared SSTables to shard 1
Processing of tables by sstable_directory often happens in parallel, and
messages from sstable_directory are intermixed. Having a message like
above is not very informative, as it tells nothing about sstables that
are being moved.
Equip the message with ks:cf pair to make it more informative.
Signed-off-by: Pavel Emelyanov <xemul@scylladb.com>
Closesscylladb/scylladb#23912
(cherry picked from commit d40d6801b0)
Closesscylladb/scylladb#24014
`read_checksum()` loads the checksum component from disk and stores a
non-owning reference in the shareable components. To avoid loading the
same component twice, the function has an early return statement.
However, this does not guarantee atomicity - two fibers or threads may
load the component and update the shareable components concurrently.
This can lead to use-after-free situations when accessing the component
through the shareable components, since the reference stored there is
non-owning. This can happen when multiple compaction tasks run on the
same SSTable (e.g., regular compaction and scrub-validate).
Fix this by not updating the reference in shareable components, if a
reference is already in place. Instead, create an owning reference to
the existing component for the current fiber. This is less efficient
than using a mutex, since the component may be loaded multiple times
from disk before noticing the race, but no locks are used for any other
SSTable component either. Also, this affects uncompressed SSTables,
which are not that common.
Fixes#23728.
Signed-off-by: Nikos Dragazis <nikolaos.dragazis@scylladb.com>
Closesscylladb/scylladb#23872
(cherry picked from commit eaa2ce1bb5)
Closesscylladb/scylladb#24267
In parallelized aggregation functions super-coordinator (node performing final merging step) receives and merges each partial result in parallel coroutines (`parallel_for_each`).
Usually responses are spread over time and actual merging is atomic.
However sometimes partial results are received at the similar time and if an aggregate function (e.g. lua script) yields, two coroutines can try to overwrite the same accumulator one after another,
which leads to losing some of the results.
To prevent this, in this patch each coroutine stores merging results in its own context and overwrites accumulator atomically, only after it was fully merged.
Comparing to the previous implementation order of operands in merging function is swapped, but the order of aggregation is not guaranteed anyway.
Fixes#20662Closesscylladb/scylladb#24106
(cherry picked from commit 5969809607)
Closesscylladb/scylladb#24387
When a tablet is migrated and cleaned up, deallocate the tablet storage
group state on `end_migration` stage, instead of `cleanup` stage:
* When the stage is updated from `cleanup` to `end_migration`, the
storage group is removed on the leaving replica.
* When the table is initialized, if the tablet stage is `end_migration`
then we don't allocate a storage group for it. This happens for
example if the leaving replica is restarted during tablet migration.
If it's initialized in `cleanup` stage then we allocate a storage
group, and it will be deallocated when transitioning to
`end_migration`.
This guarantees that the storage group is always deallocated on the
leaving replica by `end_migration`, and that it is always allocated if
the tablet wasn't cleaned up fully yet.
It is a similar case also for the pending replica when the migration is
aborted. We deallocate the state on `revert_migration` which is the
stage following `cleanup_target`.
Previously the storage group would be allocated when the tablet is
initialized on any of the tablet replicas - also on the leaving replica,
and when the tablet stage is `cleanup` or `end_migration`, and
deallocated during `cleanup`.
This fixes the following issue:
1. A migrating tablet enters cleanup stage
2. the tablet is cleaned up successfuly
3. The leaving replica is restarted, and allocates storage group
4. tablet cleanup is not called because it's already cleaned up
5. the storage group remains allocated on the leaving replica after the
migration is completed - it's not cleaned up properly.
Fixes https://github.com/scylladb/scylladb/issues/23481
backport to all relevant releases since it's a bug that results in a crash
- (cherry picked from commit 34f15ca871)
- (cherry picked from commit fb18fc0505)
- (cherry picked from commit bd88ca92c8)
Parent PR: #24393Closesscylladb/scylladb#24486
* github.com:scylladb/scylladb:
test/cluster/test_tablets: test restart during tablet cleanup
test: tablets: add get_tablet_info helper
tablets: deallocate storage state on end_migration
Add a test that reproduces issue scylladb/scylladb#23481.
The test migrates a tablet from one node to another, and while the
tablet is in some stage of cleanup - either before or right after,
depending on the parameter - the leaving replica, on which the tablet is
cleaned, is restarted.
This is interesting because when the leaving replica starts and loads
its state, the tablet could be in different stages of cleanup - the
SSTables may still exist or they may have been cleaned up already, and
we want to make sure the state is loaded correctly.
(cherry picked from commit bd88ca92c8)
When a tablet is migrated and cleaned up, deallocate the tablet storage
group state on `end_migration` stage, instead of `cleanup` stage:
* When the stage is updated from `cleanup` to `end_migration`, the
storage group is removed on the leaving replica.
* When the table is initialized, if the tablet stage is `end_migration`
then we don't allocate a storage group for it. This happens for
example if the leaving replica is restarted during tablet migration.
If it's initialized in `cleanup` stage then we allocate a storage
group, and it will be deallocated when transitioning to
`end_migration`.
This guarantees that the storage group is always deallocated on the
leaving replica by `end_migration`, and that it is always allocated if
the tablet wasn't cleaned up fully yet.
It is a similar case also for the pending replica when the migration is
aborted. We deallocate the state on `revert_migration` which is the
stage following `cleanup_target`.
Previously the storage group would be allocated when the tablet is
initialized on any of the tablet replicas - also on the leaving replica,
and when the tablet stage is `cleanup` or `end_migration`, and
deallocated during `cleanup`.
This fixes the following issue:
1. A migrating tablet enters cleanup stage
2. the tablet is cleaned up successfuly
3. The leaving replica is restarted, and allocates storage group
4. tablet cleanup is not called because it was already cleaned up
4. the storage group remains allocated on the leaving replica after the
migration is completed - it's not cleaned up properly.
Fixesscylladb/scylladb#23481
(cherry picked from commit 34f15ca871)
`chunked_managed_vector` is a vector-like container which splits
its contents into multiple contiguous allocations if necessary,
in order to fit within LSA's max preferred contiguous allocation
limits.
Each limited-size chunk is stored in a `managed_vector`.
`managed_vector` is unaware of LSA's size limits.
It's up to the user of `managed_vector` to pick a size which
is small enough.
This happens in `chunked_managed_vector::max_chunk_capacity()`.
But the calculation is wrong, because it doesn't account for
the fact that `managed_vector` has to place some metadata
(the backreference pointer) inside the allocation.
In effect, the chunks allocated by `chunked_managed_vector`
are just a tiny bit larger than the limit, and the limit is violated.
Fix this by accounting for the metadata.
Also, before the patch `chunked_managed_vector::max_contiguous_allocation`,
repeats the definition of logalloc::max_managed_object_size.
This is begging for a bug if `logalloc::max_managed_object_size`
changes one day. Adjust it so that `chunked_managed_vector` looks
directly at `logalloc::max_managed_object_size`, as it means to.
Fixesscylladb/scylladb#23854
(cherry picked from commit 7f9152babc)
Closesscylladb/scylladb#24369
When the topology coordinator is shut down while doing a long-running
operation, the current operation might throw a raft::request_aborted
exception. This is not a critical issue and should not be logged with
ERROR verbosity level.
Make sure that all the try..catch blocks in the topology coordinator
which:
- May try to acquire a new group0 guard in the `try` part
- Have a `catch (...)` block that print an ERROR-level message
...have a pass-through `catch (raft::request_aborted&)` block which does
not log the exception.
Fixes: scylladb/scylladb#22649Closesscylladb/scylladb#23962
(cherry picked from commit 156ff8798b)
Closesscylladb/scylladb#24074
Currently, flush throws no_such_column_family if a table is dropped. Skip the flush of dropped table instead.
Fixes: #16095.
Needs backport to 2025.1 and 6.2 as they contain the bug
- (cherry picked from commit 91b57e79f3)
- (cherry picked from commit c1618c7de5)
Parent PR: #23876Closesscylladb/scylladb#23904
* github.com:scylladb/scylladb:
test: test table drop during flush
replica: skip flush of dropped table
Currently, stream_session::prepare throws when a table in requests
or summaries is dropped. However, we do not want to fail streaming
if the table is dropped.
Delete table checks from stream_session::prepare. Further streaming
steps can handle the dropped table and finish the streaming successfully.
Fixes: #15257.
Closesscylladb/scylladb#23915
(cherry picked from commit 20c2d6210e)
Closesscylladb/scylladb#24050
The loading_cache has a periodic timer which acquires the
_timer_reads_gate. The stop() method first closes the gate and then
cancels the timer - this order is necessary because the timer is
re-armed under the gate. However, the timer callback does not check
whether the gate was closed but tries to acquire it, which might result
in unhandled exception which is logged with ERROR severity.
Fix the timer callback by acquiring access to the gate at the beginning
and gracefully returning if the gate is closed. Even though the gate
used to be entered in the middle of the callback, it does not make sense
to execute the timer's logic at all if the cache is being stopped.
Fixes: scylladb/scylladb#23951Closesscylladb/scylladb#23952
(cherry picked from commit 8ffe4b0308)
Closesscylladb/scylladb#23980
In case when dht::boot_strapper::get_boostrap_tokens fail to parse the
tokens, the topology coordinator handles the exception and schedules a
rollback. However, the current code tries to continue with the topology
coordinator logic even if an exception occurs, leaving boostrap_tokens
empty. This does not make sense and can actually cause issues,
specifically in prepare_and_broadcast_cdc_generation_data which
implicitly expect that the bootstrap_tokens of the first node in the
cluster will not be empty.
Fix this by adding the missing break.
Fixes: scylladb/scylladb#23897
From the code inspection alone it looks like 2025.1 and 6.2 have this problem, so marking for backport to both of them.
- (cherry picked from commit 66acaa1bf8)
- (cherry picked from commit 845cedea7f)
- (cherry picked from commit 670a69007e)
Parent PR: #23914Closesscylladb/scylladb#23948
* github.com:scylladb/scylladb:
test: cluster: add test_bad_initial_token
topology coordinator: do not proceed further on invalid boostrap tokens
cdc: add sanity check for generating an empty generation
Check whether a node is alive before making an rpc that gathers children
infos from the whole cluster in virtual_task::impl::get_children.
Fixes: https://github.com/scylladb/scylladb/issues/22514.
Needs backport to 2025.1 and 6.2 as they contain the bug.
- (cherry picked from commit 53e0f79947)
- (cherry picked from commit e178bd7847)
Parent PR: #23787Closesscylladb/scylladb#23942
* github.com:scylladb/scylladb:
test: add test for getting tasks children
tasks: check whether a node is alive before rpc
Scylla operations use concurrency semaphores to limit the number of concurrent operations and prevent resource exhaustion. The semaphore is selected based on the current scheduling group.
For RAFT group operations, it is essential to use a system semaphore to avoid queuing behind user operations. This patch ensures that RAFT operations use the `gossip` scheduling group to leverage the system semaphore.
Fixes scylladb/scylladb#21637
Backport: 6.2 and 6.1
- (cherry picked from commit 60f1053087)
- (cherry picked from commit e05c082002)
Parent PR: #22779Closesscylladb/scylladb#23769
* github.com:scylladb/scylladb:
ensure raft group0 RPCs use the gossip scheduling group
Move RAFT operations verbs to GOSSIP group.
Check whether a node is alive before making an rpc that gathers children
infos from the whole cluster in virtual_task::impl::get_children.
(cherry picked from commit 53e0f79947)
Scylla operations use concurrency semaphores to limit the number
of concurrent operations and prevent resource exhaustion. The
semaphore is selected based on the current scheduling group.
For Raft group operations, it is essential to use a system semaphore to
avoid queuing behind user operations.
This commit adds a check to ensure that the raft group0 RPCs are
executed with the `gossiper` scheduling group.
(cherry picked from commit e05c082002)
In order for RAFT operations to use the gossip system semaphore, moving RAFT
verbs to the gossip group in `do_get_rpc_client_idx`, messaging_service.
Fixes scylladb/scylladb21637
(cherry picked from commit 60f1053087)
Adds a test which checks that rollback works properly in case when a bad
value of the initial_token function is provided.
(cherry picked from commit 670a69007e)
In case when dht::boot_strapper::get_boostrap_tokens fail to parse the
tokens, the topology coordinator handles the exception and schedules a
rollback. However, the current code tries to continue with the topology
coordinator logic even if an exception occurs, leaving boostrap_tokens
empty. This does not make sense and can actually cause issues,
specifically in prepare_and_broadcast_cdc_generation_data which
implicitly expect that the bootstrap_tokens of the first node in the
cluster will not be empty.
Fix this by adding the missing break.
Fixes: scylladb/scylladb#23897
(cherry picked from commit 845cedea7f)
It doesn't make sense to create an empty CDC generation because it does
not make sense to have a cluster with no tokens. Add a sanity check to
cdc::make_new_generation_description which fails if somebody attempts to
do that (i.e. when the set of current tokens + optionally bootstrapping
node's tokens is empty).
The function does not work correctly if it is misused, as we saw in
scylladb/scylladb#23897. While the function should not be misused in the
first place, it's better to throw an exception rather than crash -
especially that this crash could happen on the topology coordinator.
(cherry picked from commit 66acaa1bf8)
Currently, when we load a frozen schema into the registry, we lose
the base info if the schema was of a view. Because of that, in various
places we need to set the base info again, and in some codepaths we
may miss it completely, which may make us unable to process some
requests (for example, when executing reverse queries on views).
Even after setting the base info, we may still lose it if the schema
entry gets deactivated due to all `schema_ptr`s temporarily dying.
To fix this, this patch adds the base schema to the registry, alongside
the view schema. We store just the frozen base schema, so that we can
transfer it across shards. With the base schema, we can now set the base
info when returning the schema from the registry. As a result, we can now
assume that all view schemas returned by the registry have base_info set.
In this series we also make sure that the view schemas in the registry are
kept up-to-date in regards to base schema changes.
Fixes https://github.com/scylladb/scylladb/issues/21354
This issue is a bug, so adding backport labels 6.1 and 6.2
- (cherry picked from commit 6f11edbf3f)
- (cherry picked from commit dfe3810f64)
- (cherry picked from commit 82f2e1b44c)
- (cherry picked from commit 3094ff7cbe)
- (cherry picked from commit 74cbc77f50)
Parent PR: #21862Closesscylladb/scylladb#23046
* github.com:scylladb/scylladb:
test: add test for schema registry maintaining base info for views
schema_registry: avoid setting base info when getting the schema from registry
schema_registry: update cached base schemas when updating a view
schema_registry: cache base schemas for views
db: set base info before adding schema to registry
Commit 876478b84f ("storage_service: allow concurrent tablet migration in tablets/move API", 2024-02-08) introduced a code path on which the topology state machine would be busy -- in "tablet_draining" or "tablet_migration" state -- at the time of starting tablet migration. The pre-commit code would unconditionally transition the topology to "tablet_migration" state, assuming the topology had been idle previously. On the new code path, this state change would be idempotent if the topology state machine had been busy in "tablet_migration", but the state change would incorrectly overwrite the "tablet_draining" state otherwise.
Restrict the state change to when the topology state machine is idle.
In addition, add the topology update to the "updates" vector with plain push_back(). emplace_back() is not helpful here, as topology_mutation_builder::build() cannot construct in-place, and so we invoke the "canonical_mutation" move constructor once, either way.
Unit test:
Start a two node cluster. Create a single tablet on one of the nodes. Start decommissioning that node, but block decommissioning at once. In that state (i.e., in "tablet_draining"), move the tablet manually to the other node. Check that transit_tablet() leaves the topology transition state alone.
Fixes https://github.com/scylladb/scylladb/issues/20073.
Commit 876478b84f was first released in scylla-6.0.0, so we might want to backport this patch accordingly.
- (cherry picked from commit e1186f0ae6)
- (cherry picked from commit 841ca652a0)
Parent PR: #23751Closesscylladb/scylladb#23768
* github.com:scylladb/scylladb:
storage_service: add unit test for mid-decommission transit_tablet()
storage_service: preserve state of busy topology when transiting tablet
Commit 14bf09f447 added a single-chunk layout to `managed_bytes`, which makes the overhead of `managed_bytes` smaller in the common case of a small buffer.
But there was a bug in it. In the copy constructor of `managed_bytes`, a copy of a single-chunk `managed_bytes` is made single-chunk too.
But this is wrong, because the source of the copy and the target of the copy might have different preferred max contiguous allocation sizes.
In particular, if a `managed_bytes` of size between 13 kiB and 128 kiB is copied from the standard allocator into LSA, the resulting `managed_bytes` is a single chunk which violates LSA's preferred allocation size. (And therefore is placed by LSA in the standard allocator).
In other words, since Scylla 6.0, cache and memtable cells between 13 kiB and 128 kiB are getting allocated in the standard allocator rather than inside LSA segments.
Consequences of the bug:
1. Effective memory consumption of an affected cell is rounded up to the nearest power of 2.
2. With a pathological-enough allocation pattern (for example, one which somehow ends up placing a single 16 kiB memtable-owned allocation in every aligned 128 kiB span), memtable flushing could theoretically deadlock, because the allocator might be too fragmented to let the memtable grow by another 128 kiB segment, while keeping the sum of all allocations small enough to avoid triggering a flush. (Such an allocation pattern probably wouldn't happen in practice though).
3. It triggers a bug in reclaim which results in spurious allocation failures despite ample evictable memory.
There is a path in the reclaimer procedure where we check whether reclamation succeeded by checking that the number of free LSA segments grew.
But in the presence of evictable non-LSA allocations, this is wrong because the reclaim might have met its target by evicting the non-LSA allocations, in which case memory is returned directly to the standard allocator, rather than to the pool of free segments.
If that happens, the reclaimer wrongly returns `reclaimed_nothing` to Seastar, which fails the allocation.
Refs (possibly fixes) https://github.com/scylladb/scylladb/issues/21072
Fixes https://github.com/scylladb/scylladb/issues/22941
Fixes https://github.com/scylladb/scylladb/issues/22389
Fixes https://github.com/scylladb/scylladb/issues/23781
This is a regression fix, should be backported to all affected releases.
- (cherry picked from commit 4e2f62143b)
- (cherry picked from commit 6c1889f65c)
Parent PR: #23782Closesscylladb/scylladb#23809
* github.com:scylladb/scylladb:
managed_bytes_test: add a reproducer for #23781
managed_bytes: in the copy constructor, respect the target preferred allocation size
Fixes#22688
If we set a dc rf to zero, the options map will still retain a dc=0 entry.
If this dc is decommissioned, any further alters of keyspace will fail,
because the union of new/old options will now contained an unknown keyword.
Change alter ks options processing to simply remove any dc with rf=0 on
alter, and treat this as an implicit dc=0 in nw-topo strategy.
This means we change the reallocate_tablets routine to not rely on
the strategy objects dc mapping, but the full replica topology info
for dc:s to consider for reallocation. Since we verify the input
on attribute processing, the amount of rf/tablets moved should still
be legal.
v2:
* Update docs as well.
v3:
* Simplify dc processing
* Reintroduce options empty check, but do early in ks_prop_defs
* Clean up unit test some
Closesscylladb/scylladb#22693
(cherry picked from commit 342df0b1a8)
(Update: workaround python test objects not having dc info)
Closesscylladb/scylladb#22876
Commit 14bf09f447 added a single-chunk
layout to `managed_bytes`, which makes the overhead of `managed_bytes`
smaller in the common case of a small buffer.
But there was a bug in it. In the copy constructor of `managed_bytes`,
a copy of a single-chunk `managed_bytes` is made single-chunk too.
But this is wrong, because the source of the copy and the target
of the copy might have different preferred max contiguous allocation
sizes.
In particular, if a `managed_bytes` of size between 13 kiB and 128 kiB
is copied from the standard allocator into LSA, the resulting
`managed_bytes` is a single chunk which violates LSA's preferred
allocation size. (And therefore is placed by LSA in the standard
allocator).
In other words, since Scylla 6.0, cache and memtable cells
between 13 kiB and 128 kiB are getting allocated in the standard allocator
rather than inside LSA segments.
Consequences of the bug:
1. Effective memory consumption of an affected cell is rounded up to the nearest
power of 2.
2. With a pathological-enough allocation pattern
(for example, one which somehow ends up placing a single 16 kiB
memtable-owned allocation in every aligned 128 kiB span),
memtable flushing could theoretically deadlock,
because the allocator might be too fragmented to let the memtable
grow by another 128 kiB segment, while keeping the sum of all
allocations small enough to avoid triggering a flush.
(Such an allocation pattern probably wouldn't happen in practice though).
3. It triggers a bug in reclaim which results in spurious
allocation failures despite ample evictable memory.
There is a path in the reclaimer procedure where we check whether
reclamation succeeded by checking that the number of free LSA
segments grew.
But in the presence of evictable non-LSA allocations, this is wrong
because the reclaim might have met its target by evicting the non-LSA
allocations, in which case memory is returned directly to the
standard allocator, rather than to the pool of free segments.
If that happens, the reclaimer wrongly returns `reclaimed_nothing`
to Seastar, which fails the allocation.
Refs (possibly fixes) https://github.com/scylladb/scylladb/issues/21072
Fixes https://github.com/scylladb/scylladb/issues/22941
Fixes https://github.com/scylladb/scylladb/issues/22389
Fixes https://github.com/scylladb/scylladb/issues/23781
(cherry picked from commit 4e2f62143b)
This test enables trace-level logging for the mutation_data logger,
which seems to be too much in debug mode and the test read times out.
Increase timeout to 1minute to avoid this.
Fixes: #23513Fixes: #23512Closesscylladb/scylladb#23558
(cherry picked from commit 7bbfa5293f)
Closesscylladb/scylladb#23793
Start a two node cluster. Create a single tablet on one of the nodes.
Start decommissioning that node, but block decommissioning at once. In
that state (i.e., in "tablet_draining"), move the tablet manually to the
other node. Check that transit_tablet() leaves the topology transition
state alone.
Signed-off-by: Laszlo Ersek <laszlo.ersek@scylladb.com>
(cherry picked from commit 841ca652a0)
Commit 876478b84f ("storage_service: allow concurrent tablet migration
in tablets/move API", 2024-02-08) introduced a code path on which the
topology state machine would be busy -- in "tablet_draining" or
"tablet_migration" state -- at the time of starting tablet migration. The
pre-commit code would unconditionally transition the topology to
"tablet_migration" state, assuming the topology had been idle previously.
On the new code path, this state change would be idempotent if the
topology state machine had been busy in "tablet_migration", but the state
change would incorrectly overwrite the "tablet_draining" state otherwise.
Restrict the state change to when the topology state machine is idle.
In addition, add the topology update to the "updates" vector with plain
push_back(). emplace_back() is not helpful here, as
topology_mutation_builder::build() cannot construct in-place, and so we
invoke the "canonical_mutation" move constructor once, either way.
Signed-off-by: Laszlo Ersek <laszlo.ersek@scylladb.com>
(cherry picked from commit e1186f0ae6)
Because of rounding and alignment, there are multiple pools for small
sizes (e.g. 4 for size 32). Because the pool selection algorithm
ignores alignment, different pools can be chosen for different object
sizes. For example, an object size of 29 will choose the first pool
of size 32, while an object size of 32 will choose the fourth pool of
size 32.
The small-objects command doesn't know about this and always considers
just the first pool for a given size. This causes it to miss out on
sister pools.
While it's possible to adjust pool selection to always choose one of the
pools, it may eat a precious cycle. So instead let's compensate in the
small-objects command. Instead of finding one pool for a given size,
find all of them, and iterate over all those pools.
Fixes#23603Closesscylladb/scylladb#23604
(cherry picked from commit b4d4e48381)
Closesscylladb/scylladb#23748
A default timestamp (not to confuse with the timestamp passed via 'USING TIMESTAMP' query clause) can be set using 0x20 flag and the <timestamp> field in the binary CQL frame payload of QUERY, EXECUTE and BATCH ops. It also happens to be a default of a Java CQL Driver.
However, we were only setting the corresponding info in the CQL Tracing context of a QUERY operation. For an unknown reason we were not setting this for an EXECUTE and for a BATCH traces (I guess I simply forgot to set it back then).
This patch fixes this.
Fixes#23173
The issue fixed by this PR is not critical but the fix is simple and safe enough so we should backport it to all live releases.
- (cherry picked from commit ca6bddef35)
- (cherry picked from commit f7e1695068)
Parent PR: #23174Closesscylladb/scylladb#23523
* github.com:scylladb/scylladb:
CQL Tracing: set common query parameters in a single function
transport/server.cc: set default timestamp info in EXECUTE and BATCH tracing
It is possible that the permit handed in to register_inactive_read() is already aborted (currently only possible if permit timed out). If the permit also happens to have wait for memory, the current code will attempt to call promise<>::set_exception() on the permit's promise to abort its waiters. But if the permit was already aborted via timeout, this promise will already have an exception and this will trigger an assert. Add a separate case for checking if the permit is aborted already. If so, treat it as immediate eviction: close the reader and clean up.
Fixes: scylladb/scylladb#22919
Bug is present in all live versions, backports are required.
- (cherry picked from commit 4d8eb02b8d)
- (cherry picked from commit 7ba29ec46c)
Parent PR: #23044Closesscylladb/scylladb#23144
* github.com:scylladb/scylladb:
reader_concurrency_semaphore: register_inactive_read(): handle aborted permit
test/boost/reader_concurrency_semaphore_test: move away from db::timeout_clock::now()
During streaming receiving node gets and processes mutation fragments.
If this operation fails, receiver responds with -1 status code, unless
it failed due to no_such_column_family in which case streaming of this
table should be skipped.
However, when the table was dropped, an exception handler on receiver
side may get not only data_dictionary::no_such_column_family, but also
seastar::nested_exception of two no_such_column_family.
Encountered example:
```
ERROR 2025-02-12 15:20:51,508 [shard 0:strm] stream_session - [Stream #f1cd6830-e954-11ef-afd9-b022e40bf72d] Failed to handle STREAM_MUTATION_FRAGMENTS (receive and distribute phase) for ks=ks, cf=cf, peer=756dd3fe-2bf0-4dcd-afbc-cfd5202669a0: seastar::nested_exception: data_dictionary::no_such_column_family (Can't find a column family with UUID ef9b1ee0-e954-11ef-ba4a-faf17acf4e14) (while cleaning up after data_dictionary::no_such_column_family (Can't find a column family with UUID ef9b1ee0-e954-11ef-ba4a-faf17acf4e14))
```
In this case, the exception does not match the try_catch<data_dictionary::no_such_column_family>
clause and gets handled the same as any other exception type.
Replace try_catch clause with table_sync_and_check that synchronizes
the schema and check if the table exists.
Fixes: https://github.com/scylladb/scylladb/issues/22834.
Needs backport to all live version, as they all contain the bug
- (cherry picked from commit 876cf32e9d)
- (cherry picked from commit faf3aa13db)
- (cherry picked from commit 44748d624d)
- (cherry picked from commit 35bc1fe276)
Parent PR: #22868Closesscylladb/scylladb#23289
* github.com:scylladb/scylladb:
streaming: fix the way a reason of streaming failure is determined
streaming: save a continuation lambda
streaming: use streaming namespace in table_check.{cc,hh}
repair: streaming: move table_check.{cc,hh} to streaming
GetInt() was observed to fail when the integer JSON value overflows the
int32_t type, which `GetInt()` uses for storage. When this happens,
rapidjson will assign a distinct 64 bit integer type to the value, and
attempting to access it as 32 bit integer triggers the wrong-type error,
resulting in assert failure. This was hit on the field where invoking
nodetool netstats resulted in nodetool crashing when the streamed bytes
amounts were higher than maxint.
To avoid such bugs in the future, replace all usage of GetInt() in
nodetool of GetInt64(), just to be sure.
A reproducer is added to the nodetool netstats crash.
Fixes: scylladb/scylladb#23394Closesscylladb/scylladb#23395
(cherry picked from commit bd8973a025)
Closesscylladb/scylladb#23475
During streaming receiving node gets and processes mutation fragments.
If this operation fails, receiver responds with -1 status code, unless
it failed due to no_such_column_family in which case streaming of this
table should be skipped.
However, when the table was dropped, an exception handler on receiver
side may get not only data_dictionary::no_such_column_family, but also
seastar::nested_exception of two no_such_column_family.
Encountered example:
```
ERROR 2025-02-12 15:20:51,508 [shard 0:strm] stream_session - [Stream #f1cd6830-e954-11ef-afd9-b022e40bf72d] Failed to handle STREAM_MUTATION_FRAGMENTS (receive and distribute phase) for ks=ks, cf=cf, peer=756dd3fe-2bf0-4dcd-afbc-cfd5202669a0: seastar::nested_exception: data_dictionary::no_such_column_family (Can't find a column family with UUID ef9b1ee0-e954-11ef-ba4a-faf17acf4e14) (while cleaning up after data_dictionary::no_such_column_family (Can't find a column family with UUID ef9b1ee0-e954-11ef-ba4a-faf17acf4e14))
```
In this case, the exception does not match the try_catch<data_dictionary::no_such_column_family>
clause and gets handled the same as any other exception type.
Replace try_catch clause with table_sync_and_check that synchronizes
the schema and check if the table exists.
Fixes: https://github.com/scylladb/scylladb/issues/22834.
(cherry picked from commit 35bc1fe276)
In the following patches, an additional preemption point will be
added to the coroutine lambda in register_stream_mutation_fragments.
Assign a lambda to a variable to prolong the captures lifetime.
(cherry picked from commit 44748d624d)
It is possible that the permit handed in to register_inactive_read() is
already aborted (currently only possible if permit timed out).
If the permit also happens to have wait for memory, the current code
will attempt to call promise<>::set_exception() on the permit's promise
to abort its waiters. But if the permit was already aborted via timeout,
this promise will already have an exception and this will trigger an
assert. Add a separate case for checking if the permit is aborted
already. If so, treat it as immediate eviction: close the reader and
clean up.
Fixes: scylladb/scylladb#22919
(cherry picked from commit 7ba29ec46c)
Unless the test in question actually wants to test timeouts. Timeouts
will have more pronounced consequences soon and thus using
db::timeout_clock::now() becomes a sure way to make tests flaky.
To avoid this, use db::no_timeout in the tests that don't care about
timeouts.
(cherry picked from commit 4d8eb02b8d)
Fixes#22314
Adds expected schema extensions to the tools extension set (if used). Also uses the source config extensions in schema loader instead of temp one, to ensure we can, for example, load a schema.cql with things like `tombstone_gc` or encryption attributes in them.
Bundles together the setup of "always on" schema extensions into a single call, and uses this from the three (3) init points.
Could have opted for static reg via `configurables`, but since we are moving to a single code base, the need for this is going away, hence explicit init seems more in line.
- (cherry picked from commit e6aa09e319)
- (cherry picked from commit 4aaf3df45e)
- (cherry picked from commit 00b40eada3)
- (cherry picked from commit 48fda00f12)
Parent PR: #22327Closesscylladb/scylladb#23089
* github.com:scylladb/scylladb:
tools: Add standard extensions and propagate to schema load
cql_test_env: Use add all extensions instead of inidividually
main: Move extensions adding to function
tomstone_gc: Make validate work for tools
The row cache can garbage-collect tombstones in two places:
1) When populating the cache - the underlying reader pipeline has a `compacting_reader` in it;
2) During reads - reads now compact data including garbage collection;
In both cases, garbage collection has to do overlap checks against memtables, to avoid collecting tombstones which cover data in the memtables.
This PR includes fixes for (2), which were not handled at all currently.
(1) was already supposed to be fixed, see https://github.com/scylladb/scylladb/issues/20916. But the test added in this PR showed that the test is incomplete: https://github.com/scylladb/scylladb/issues/23291. A fix for this issue is also included.
Fixes: https://github.com/scylladb/scylladb/issues/23291
Fixes: https://github.com/scylladb/scylladb/issues/23252
The fix will need backport to all live release.
- (cherry picked from commit c2518cdf1a)
- (cherry picked from commit 6b5b563ef7)
- (cherry picked from commit 7e600a0747)
- (cherry picked from commit d126ea09ba)
- (cherry picked from commit cb76cafb60)
- (cherry picked from commit df09b3f970)
- (cherry picked from commit e5afd9b5fb)
- (cherry picked from commit 34b18d7ef4)
- (cherry picked from commit f7938e3f8b)
- (cherry picked from commit 6c1f6427b3)
- (cherry picked from commit 0d39091df2)
Parent PR: #23255Closesscylladb/scylladb#23671
* github.com:scylladb/scylladb:
test/boost/row_cache_test: add memtable overlap check tests
replica/table: add error injection to memtable post-flush phase
utils/error_injection: add a way to set parameters from error injection points
test/cluster: add test_data_resurrection_in_memtable.py
test/pylib/utils: wait_for_cql_and_get_hosts(): sort hosts
replica/mutation_dump: don't assume cells are live
replica/database: do_apply() add error injection point
replica: improve memtable overlap checks for the cache
replica/memtable: add is_merging_to_cache()
db/row_cache: add overlap-check for cache tombstone garbage collection
mutation/mutation_compactor: copy key passed-in to consume_new_partition()
This adaptor adapts a mutation reader pausable consumer to the frozen
mutation visitor interface. The pausable consumer protocol allows the
consumer to skip the remaining parts of the partition and resume the
consumption with the next one. To do this, the consumer just has to
return stop_iteration::yes from one of the consume() overloads for
clustering elements, then return stop_iteration::no from
consume_end_of_partition(). Due to a bug in the adaptor, this sequence
leads to terminating the consumption completely -- so any remaining
partitions are also skipped.
This protocol implementation bug has user-visible effects, when the
only user of the adaptor -- read repair -- happens during a query which
has limitations on the amount of content in each partition.
There are two such queries: select distinct ... and select ... with
partition limit. When converting the repaired mutation to to query
result, these queries will trigger the skip sequence in the consumer and
due to the above described bug, will skip the remaining partitions in
the results, omitting these from the final query result.
This patch fixes the protocol bug, the return value of the underlying
consumer's consume_end_of_partition() is now respected.
A unit test is also added which reproduces the problem both with select
distinct ... and select ... per partition limit.
Follow-up work:
* frozen_mutation_consumer_adaptor::on_end_of_partition() calls the
underlying consumer's on_end_of_stream(), so when consuming multiple
frozen mutations, the underlying's on_end_of_stream() is called for
each partition. This is incorrect but benign.
* Improve documentation of mutation_reader::consume_pausable().
Fixes: #20084Closesscylladb/scylladb#23657
(cherry picked from commit d67202972a)
Closesscylladb/scylladb#23693
Similar to test/cluster/test_data_resurrection_in_memtable.py but works
on a single node and uses more low-level mechanism. These tests can also
reproduce more advanced scenarios, like concurrent reads, with some
reading from flushed memtables.
(cherry picked from commit 0d39091df2)
After the memtable was flushed to disk, but before it is merged to
cache. The injection point will only active for the table specified in
the "table_name" injection parameter.
(cherry picked from commit 6c1f6427b3)
With this, now it is possible to have two-way communication between
the error injection point and its enabler. The test can enable the error
injection point, then wait until it is hit, before proceedin.
(cherry picked from commit f7938e3f8b)
Such that a given index in the return hosts refers to the same
underlying Scylla instance, as the same index in the passed-in nodes
list. This is what users of this method intuitively expect, but
currently the returned hosts list is unordered (has random order).
(cherry picked from commit e5afd9b5fb)
Currently the dumper unconditionally extracts the value of atomic cells,
assuming they are live. This doesn't always hold of course and
attempting to get the value of a dead cell will lead to marshalling
errors. Fix by checking is_live() before attempting to get the cell
value. Fix for both regular and collection cells.
(cherry picked from commit df09b3f970)
So writes (to user tables) can be failed on a replica, via error
injection. Should simplify tests which want to create differences in
what writes different replicas receive.
(cherry picked from commit cb76cafb60)
The current memtable overlap check that is used by the cache
-- table::get_max_purgeable_fn_for_cache_underlying_reader() -- only
checks the active memtable, so memtables which are either being flushed
or are already flushed and also have active reads against them do not
participate in the overlap check.
This can result in temporary data resurrection, where a cache read can
garbage-collect a tombstone which still covers data in a flushing or
flushed memtable, which still have active read against it.
To prevent this, extend the overlap check to also consider all of the
memtable list. Furthermore, memtable_list::erase() now places the removed
(flushed) memtable in an intrusive list. These entries are alive only as
long as there are readers still keeping an `lw_shared_ptr<memtable>`
alive. This list is now also consulted on overlap checks.
(cherry picked from commit d126ea09ba)
The cache should not garbage-collect tombstone which cover data in the
memtable. Add overlap checks (get_max_purgeable) to garbage collection
to detect tombstones which cover data in the memtable and to prevent
their garbage collection.
(cherry picked from commit 6b5b563ef7)
This doesn't introduce additional work for single-partition queries: the
key is copied anyway on consume_end_of_stream().
Multi-partition reads and compaction are not that sensitive to
additional copy added.
This change fixes a bug in the compacting_reader: currently the reader
passes _last_uncompacted_partition_start.key() to the compactor's
consume_new_partition(). When the compactor emits enough content for this
partition, _last_uncompacted_partition_start is moved from to emit the
partition start, this makes the key reference passed to the compaction
corrupt (refer to moved-from value). This in turn means that subsequent
GC checks done by the compactor will be done with a corrupt key and
therefore can result in tombstone being garbage-collected while they
still cover data elsewhere (data resurrection).
The compacting reader is violating the API contract and normally the bug
should be fixed there. We make an exception here because doing the fix
in the mutation compactor better aligns with our future plans:
* The fix simplifies the compactor (gets rid of _last_dk).
* Prepares the way to get rid of the consume API used by the compactor.
(cherry picked from commit c2518cdf1a)
`safe_foreach_sstable` doesn't do its job correctly.
It iterates over an sstable set under the sstable deletion
lock in an attempt to ensure that SSTables aren't deleted during the iteration.
The thing is, it takes the deletion lock after the SSTable set is
already obtained, so SSTables might get unlinked *before* we take the lock.
Remove this function and fix its usages to obtain the set and iterate
over it under the lock.
Closesscylladb/scylladb#23397
(cherry picked from commit e23fdc0799)
Closesscylladb/scylladb#23627
The `table::do_apply()` method verifies if the compaction group's async
gate is open to determine if the compaction group is active. Closing
this async gate prevents any new operations but waits for existing
holders to exit, allowing their operations to complete. When holding a
gate, holders will observe the gate as closed when it is being closed,
but this is irrelevant as they are already inside the gate and are
allowed to complete. All the callers of `table::do_apply()` already
enter the gate before calling the method. So, the async gate check
inside `table::do_apply()` will erroneously throw an exception when the
compaction group is closing despite holding the gate. This commit
removes the check to prevent this from happening.
Fixes#23348
Signed-off-by: Lakshmi Narayanan Sreethar <lakshmi.sreethar@scylladb.com>
Closesscylladb/scylladb#23579
(cherry picked from commit 750f4baf44)
Closesscylladb/scylladb#23644
The "make-pr-ready-for-review" workflow was failing with an "Input
required and not supplied: token" error. This was due to GitHub Actions
security restrictions preventing access to the token when the workflow
is triggered in a fork:
```
Error: Input required and not supplied: token
```
This commit addresses the issue by:
- Running the workflow in the base repository instead of the fork. This
grants the workflow access to the required token with write permissions.
- Simplifying the workflow by using a job-level `if` condition to
controlexecution, as recommended in the GitHub Actions documentation
(https://docs.github.com/en/actions/writing-workflows/choosing-when-your-workflow-runs/using-conditions-to-control-job-execution).
This is cleaner than conditional steps.
- Removing the repository checkout step, as the source code is not required for this workflow.
This change resolves the token error and ensures the
"make-pr-ready-for-review" workflow functions correctly.
Fixesscylladb/scylladb#22765
Signed-off-by: Kefu Chai <kefu.chai@scylladb.com>
Closesscylladb/scylladb#22766
(cherry picked from commit ca832dc4fb)
Closesscylladb/scylladb#23617
before this change, we specify the KillMode of the scylla-service
service unit explicitly to "process". according to
according to
https://www.freedesktop.org/software/systemd/man/latest/systemd.kill.html,
> If set to process, only the main process itself is killed (not recommended!).
and the document suggests use "control-group" over "process".
but scylla server is not a multi-process server, it is a multi-threaded
server. so it should not make any difference even if we switch to
the recommended "control-group".
in the light that we've been seeing "defunct" scylla process after
stopping the scylla service using systemd. we are wondering if we should
try to change the `KillMode` to "control-group", which is the default
value of this setting.
in this change, we just drop the setting so that the systemd stops the
service by stopping all processes in the control group of this unit
are stopped.
Fixesscylladb/scylladb#21507
Signed-off-by: Kefu Chai <kefu.chai@scylladb.com>
(cherry picked from commit 961a53f716)
Closesscylladb/scylladb#23176
Each query-type (QUERY, EXECUTE, BATCH) CQL opcode has a number of parameters
in their payload which we always want to record in the Tracing object.
Today it's a Consistency Level, Serial Consistency Level and a Default Timestamp.
Setting each of them individually can lead to a human error when one (or more) of
them would not be set. Let's eliminate such a possibility by defining
a single function that sets them all.
This also allows an easy addition of such parameters to this function in
the future.
A default timestamp (not to confuse with the timestamp passed via 'USING TIMESTAMP' query clause)
can be set using 0x20 flag and the <timestamp> field in the binary CQL frame payload of
QUERY, EXECUTE and BATCH ops. It also happens to be a default of a Java CQL Driver.
However, we were only setting the corresponding info in the CQL Tracing context of a QUERY operation.
For an unknown reason we were not setting this for an EXECUTE and for a BATCH traces (I guess I simply forgot to
set it back then).
This patch fixes this.
Fixes#23173
(cherry picked from commit ca6bddef35)
Moving a PR out of draft is only allowed to users with write access,
adding a github action to switch PR to `ready for review` once the
`conflicts` label was removed
Closesscylladb/scylladb#22446
(cherry picked from commit ed4bfad5c3)
Closesscylladb/scylladb#23006
In commit 4812a57f, the fmt-based formatter for gossip_digest_syn had
formatting code for cluster_id, partitioner, and group0_id
accidentally commented out, preventing these fields from being included
in the output. This commit restores the formatting by uncommenting the
code, ensuring full visibility of all fields in the gossip_digest_syn
message when logging permits.
This fixes a regression introduced in 4812a57f, which obscured these
fields and reduced debugging insight. Backporting is recommended for
improved observability.
Fixes#23142
Signed-off-by: Kefu Chai <kefu.chai@scylladb.com>
Closesscylladb/scylladb#23155
(cherry picked from commit 2a9966a20e)
Closesscylladb/scylladb#23198
Fix UBSan abort caused by integer overflow when calculating time difference
between read and write operations. The issue occurs when:
1. The queried partition on replicas is not purgeable (has no recorded
modified time)
2. Digests don't match across replicas
3. The system attempts to calculate timespan using missing/negative
last_modified timestamps
This change skips cross-DC repair optimization when write timestamp is
negative or missing, as this optimization is only relevant for reads
occurring within write_timeout of a write.
Error details:
```
service/storage_proxy.cc:5532:80: runtime error: signed integer overflow: -9223372036854775808 - 1741940132787203 cannot be represented in type 'int64_t' (aka 'long')
SUMMARY: UndefinedBehaviorSanitizer: undefined-behavior service/storage_proxy.cc:5532:80
Aborting on shard 1, in scheduling group sl:default
```
Related to previous fix 39325cf which handled negative read_timestamp cases.
Fixes#23314
Signed-off-by: Kefu Chai <kefu.chai@scylladb.com>
Closesscylladb/scylladb#23359
(cherry picked from commit ebf9125728)
Closesscylladb/scylladb#23386
The test fails sporadically with:
cassandra.ReadFailure: Error from server: code=1300 [Replica(s) failed to execute read] message="Operation failed for test3.test2 - received 1 responses and 1 failures from 2 CL=QUORUM." info={'consistency': 'QUORUM', 'required_responses': 2, 'received_responses': 1, 'failures': 1}
That's becase a server is stopped in the middle of the workload.
The server is stopped ungracefully which will cause some requests to
time out. We should stop it gracefully to allow in-flight requests to
finish.
Fixes#20492Closesscylladb/scylladb#23451
(cherry picked from commit 8e506c5a8f)
Closesscylladb/scylladb#23468
This commit adds documentation for zero-token nodes and an explanation
of how to use them to set up an arbiter DC to prevent a quorum loss
in multi-DC deployments.
The commit adds two documents:
- The one in Architecture describes zero-token nodes.
- The other in Cluster Management explains how to use them.
We need separate documents because zero-token nodes may be used
for other purposes in the future.
In addition, the documents are cross-linked, and the link is added
to the Create a ScyllaDB Cluster - Multi Data Centers (DC) document.
Refs https://github.com/scylladb/scylladb/pull/19684
Fixes https://github.com/scylladb/scylladb/issues/20294Closesscylladb/scylladb#21348
(cherry picked from commit 9ac0aa7bba)
Closesscylladb/scylladb#23200
The test `test_mv_topology_change` is a regression test for
scylladb/scylladb#19529. The problem was that CL=ANY writes issued when
all replicas were down would be kept in memory until the timeout. In
particular, MV updates are CL=ANY writes and have a 5 minute timeout.
When doing topology operations for vnodes or when migrating tablet
replicas, the cluster goes through stages where the replica sets for
writes undergo changes, and the writes started with the old replica set
need to be drained first.
Because of the aforementioned MV updates, the removenode operation could
be delayed by 5 minutes or more. Therefore, the
`test_mv_topology_change` test uses a short timeout for the removenode
operation, i.e. 30s. Apparently, this is too low for the debug mode and
the test has been observed to time out even though the removenode
operation is progressing fine.
Increase the timeout to 60s. This is the lowest timeout for the
removenode operation that we currently use among the in-repo tests, and
is lower than 5 minutes so the test will still serve its purpose.
Fixes: scylladb/scylladb#22953Closesscylladb/scylladb#22958
(cherry picked from commit 43ae3ab703)
Closesscylladb/scylladb#23052
In this patch we test the behavior of schema registry in a few
scenarios where it was identified it could misbehave.
The first one is reverse schemas for views. Previously, SELECT
queries with reverse order on views could fail because we didn't
have base info in the registry for such schemas.
The second one is schemas that temporarily died in the registry.
This can happen when, while processing a query for a given schema
version, all related schema_ptrs were destroyed, but this schema
was requested before schema_registry::grace_period() has passed.
In this scenario, the base info would not be recovered, causing
errors.
(cherry picked from commit 74cbc77f50)
After the previous patches, the view schemas returned by schema registry
always have their base info set. As such, we no longer need to set it after
getting the view schema from the registry. This patch removes these
unnecessary updates.
(cherry picked from commit 3094ff7cbe)
Fixes#22314
Adds expected schema extensions to the tools extension set (if used). Also uses the source config extensions in schema loader instead of temp one, to ensure we can, for example, load a schema.cql with things like `tombstone_gc` or encryption attributes in them.
(cherry picked from commit 48fda00f12)
The schema registry now holds base schemas for view schemas.
The base schema may change without changing the view schema, so to
preserve the change in the schema registry, we also update the
base schema in the registry when updating the base info in the
view schema.
(cherry picked from commit 82f2e1b44c)
Currently, when we load a frozen schema into the registry, we lose
the base info if the schema was of a view. Because of that, in various
places we need to set the base info again, and in some codepaths we
may miss it completely, which may make us unable to process some
requests (for example, when executing reverse queries on views).
Even after setting the base info, we may still lose it if the schema
entry gets deactivated.
To fix this, this patch adds the base schema to the registry, alongside
the view schema. With the base schema, we can now set the base
info when returning the schema from the registry. As a result, we can now
assume that all view schemas returned by the registry have base_info set.
To store the base schema, the loader methods now have to return the base
schema alongside the view schema. At the same time, when loading into
the registry, we need to check whether we're loading a view schema, and if
so, we need to also provide the base schema. When inserting a regular table
schema, the base schema should be a disengaged optional.
(cherry picked from commit dfe3810f64)
In the following patches, we'll assure that view schemas returned by the
schema registry always have base info set. To prepare for that, make sure
that the base info is always set before inserting it into schema registry,
(cherry picked from commit 6f11edbf3f)
Currently, maybe_switch_to_new_writer resets _current_writer
only in a continuation after closing the current writer.
This leaves a window of vulnerability if close() yields,
and token_group_based_splitting_mutation_writer::close()
is called. Seeing the engaged _current_writer, close()
will call _current_writer->close() - which must be called
exactly once.
Solve this when switching to a new writer by resetting
_current_writer before closing it and potentially yielding.
Fixes#22715
Signed-off-by: Benny Halevy <bhalevy@scylladb.com>
Closesscylladb/scylladb#22922
(cherry picked from commit 29b795709b)
Closesscylladb/scylladb#22964
`set_notify_handler()` is called after a querier was inserted into the querier cache. It has two purposes: set a callback for eviction and set a TTL for the cache entry. This latter was not disabling the pre-existing timeout of the permit (if any) and this would lead to premature eviction of the cache entry if the timeout was shorter than TTL (which his typical).
Disable the timeout before setting the TTL to prevent premature eviction.
Fixes: https://github.com/scylladb/scylladb/issues/22629
Backport required to all active releases, they are all affected.
- (cherry picked from commit a3ae0c7cee)
- (cherry picked from commit 9174f27cc8)
Parent PR: #22701Closesscylladb/scylladb#22751
* github.com:scylladb/scylladb:
reader_concurrency_semaphore: set_notify_handler(): disable timeout
reader_permit: mark check_abort() as const
set_notify_handler() is called after a querier was inserted into the
querier cache. It has two purposes: set a callback for eviction and set
a TTL for the cache entry. This latter was not disabling the
pre-existing timeout of the permit (if any) and this would lead to
premature eviction of the cache entry if the timeout was shorter than
TTL (which his typical).
Disable the timeout before setting the TTL to prevent premature
eviction.
Fixes: #scylladb/scylladb#22629
(cherry picked from commit 9174f27cc8)
The code currently assumes that a session has both sender and receiver
streams, but it is possible to have just one or the other.
Change the test to include this scenario and remove this assumption from
the code.
Fixes: #22770Closesscylladb/scylladb#22771
(cherry picked from commit 87e8e00de6)
Closesscylladb/scylladb#22873
Said method passes down its `diff` input to `mutate_internal()`, after
some std::ranges massaging. Said massaging is destructive -- it moves
items from the diff. If the output range is iterated-over multiple
times, only the first time will see the actual output, further
iterations will get an empty range.
When trace-level logging is enabled, this is exactly what happens:
`mutate_internal()` iterates over the range multiple times, first to log
its content, then to pass it down the stack. This ends up resulting in
a range with moved-from elements being pased down and consequently write
handlers being created with nullopt mutations.
Make the range re-entrant by materializing it into a vector before
passing it to `mutate_internal()`.
Fixes: scylladb/scylladb#21907Fixes: scylladb/scylladb#21714Closesscylladb/scylladb#21910
(cherry picked from commit 7150442f6a)
Closesscylladb/scylladb#22853
On short-pages, cut short because of a tombstone prefix.
When page-results are filtered and the filter drops some rows, the
last-position is taken from the page visitor, which does the filtering.
This means that last partition and row position will be that of the last
row the filter saw. This will not match the last position of the
replica, when the replica cut the page due to tombstones.
When fetching the next page, this means that all the tombstone suffix of
the last page, will be re-fetched. Worse still: the last position of the
next page will not match that of the saved reader left on the replica, so
the saved reader will be dropped and a new one created from scratch.
This wasted work will show up as elevated tail latencies.
Fix by always taking the last position from raw query results.
Fixes: #22620Closesscylladb/scylladb#22622
(cherry picked from commit 7ce932ce01)
Closesscylladb/scylladb#22718
with_permit() creates a permit, with a self-reference, to avoid
attaching a continuation to the permit's run function. This
self-reference is used to keep the permit alive, until the execution
loop processes it. This self reference has to be carefully cleared on
error-paths, otherwise the permit will become a zombie, effectively
leaking memory.
Instead of trying to handle all loose ends, get rid of this
self-reference altogether: ask caller to provide a place to save the
permit, where it will survive until the end of the call. This makes the
call-site a little bit less nice, but it gets rid of a whole class of
possible bugs.
Fixes: #22588Closesscylladb/scylladb#22624
(cherry picked from commit f2d5819645)
Closesscylladb/scylladb#22703
When a replica get a write request it performs get_schema_for_write,
which waits until the schema is synced. However, database::add_column_family
marks a schema as synced before the table is added. Hence, the write may
see the schema as synced, but hit no_such_column_family as the table
hasn't been added yet.
Mark schema as synced after the table is added to database::_tables_metadata.
Fixes: #22347.
Closesscylladb/scylladb#22348
(cherry picked from commit 328818a50f)
Closesscylladb/scylladb#22603
If start_time/end_time is unspecified for a task, task_manager API
returns epoch. Nodetool prints the value in task status.
Fix nodetool tasks commands to print empty string for start_time/end_time
if it isn't specified.
Modify nodetool tasks status docs to show empty end_time.
Fixes: #22373.
Closesscylladb/scylladb#22370
(cherry picked from commit 477ad98b72)
Closesscylladb/scylladb#22600
`tablet_storage_group_manager::all_storage_groups_split()` calls `set_split_mode()` for each of its storage groups to create split ready compaction groups. It does this by iterating through storage groups using `std::ranges::all_of()` which is not guaranteed to iterate through the entire range, and will stop iterating on the first occurrence of the predicate (`set_split_mode()`) returning false. `set_split_mode()` creates the split compaction groups and returns false if the storage group's main compaction group or merging groups are not empty. This means that in cases where the tablet storage group manager has non-empty storage groups, we could have a situation where split compaction groups are not created for all storage groups.
The missing split compaction groups are later created in `tablet_storage_group_manager::split_all_storage_groups()` which also calls `set_split_mode()`, and that is the reason why split completes successfully. The problem is that
`tablet_storage_group_manager::all_storage_groups_split()` runs under a group0 guard, but
`tablet_storage_group_manager::split_all_storage_groups()` does not. This can cause problems with operations which should exclude with compaction group creation. i.e. DROP TABLE/DROP KEYSPACE
Fixes#22431
This is a bugfix and should be back ported to versions with tablets: 6.1 6.2 and 2025.1
- (cherry picked from commit 24e8d2a55c)
- (cherry picked from commit 8bff7786a8)
Parent PR: #22330Closesscylladb/scylladb#22559
* github.com:scylladb/scylladb:
test: add reproducer and test for fix to split ready CG creation
table: run set_split_mode() on all storage groups during all_storage_groups_split()
Currently, when the status of a task is queried and the task is already finished,
it gets unregistered. Getting the status shouldn't be a one-time operation.
Stop removing the task after its status is queried. Adjust tests not to rely
on this behavior. Add task_manager/drain API and nodetool tasks drain
command to remove finished tasks in the module.
Fixes: https://github.com/scylladb/scylladb/issues/21388.
It's a fix to task_manager API, should be backported to all branches
- (cherry picked from commit e37d1bcb98)
- (cherry picked from commit 18cc79176a)
Parent PR: #22310Closesscylladb/scylladb#22597
* github.com:scylladb/scylladb:
api: task_manager: do not unregister tasks on get_status
api: task_manager: add /task_manager/drain
This series exposes a Clock template parameter for loading_cache so that the test could use
the manual_clock rather than the lowres_clock, since relying on the latter is flaky.
In addition, the test load function is simplified to sleep some small random time and co_return the expected string,
rather than reading it from a real file, since the latter's timing might also be flaky, and it out-of-scope for this test.
Fixes#20322
* The test was flaky forever, so backport is required for all live versions.
- (cherry picked from commit b509644972)
- (cherry picked from commit 934a9d3fd6)
- (cherry picked from commit d68829243f)
- (cherry picked from commit b258f8cc69)
- (cherry picked from commit 0841483d68)
- (cherry picked from commit 32b7cab917)
Parent PR: #22064Closesscylladb/scylladb#22640
* github.com:scylladb/scylladb:
tests: loading_cache_test: use manual_clock
utils: loading_cache: make clock_type a template parameter
test: loading_cache_test: use function-scope loader
test: loading_cache_test: simlute loader using sleep
test: lib: eventually: add sleep function param
test: lib: eventually: make *EVENTUALLY_EQUAL inline functions
Relying on a real-time clock like lowres_clock
can be flaky (in particular in debug mode).
Use manual_clock instead to harden the test against
timing issues.
Fixes#20322
Signed-off-by: Benny Halevy <bhalevy@scylladb.com>
(cherry picked from commit 32b7cab917)
Signed-off-by: Benny Halevy <bhalevy@scylladb.com>
So the unit test can use manual_clock rather than lowres_clock
which can be flaky (in particular in debug mode).
Signed-off-by: Benny Halevy <bhalevy@scylladb.com>
(cherry picked from commit 0841483d68)
Rather than a global function, accessing a thread-local `load_count`.
The thread-local load_count cannot be used when multiple test
cases run in parallel.
Signed-off-by: Benny Halevy <bhalevy@scylladb.com>
(cherry picked from commit b258f8cc69)
This test isn't about reading values from file,
but rather it's about the loading_cache.
Reading from the file can sometimes take longer than
the expected refresh times, causing flakiness (see #20322).
Rather than reading a string from a real file, just
sleep a random, short time, and co_return the string.
Signed-off-by: Benny Halevy <bhalevy@scylladb.com>
(cherry picked from commit d68829243f)
rather then macros.
This is a first cleanup step before adding a sleep function
parameter to support also manual_clock.
Also, add a call to BOOST_REQUIRE_EQUAL/BOOST_CHECK_EQUAL,
respectively, to make an error more visible in the test log
since those entry points print the offending values
when not equal.
Signed-off-by: Benny Halevy <bhalevy@scylladb.com>
(cherry picked from commit b509644972)
The view builder builds a view by going over the entire token ring,
consuming the base table partitions, and generating view updates for
each partition.
A view is considered as built when we complete a full cycle of the
token ring. Suppose we start to build a view at a token F. We will
consume all partitions with tokens starting at F until the maximum
token, then go back to the minimum token and consume all partitions
until F, and then we detect that we pass F and complete building the
view. This happens in the view builder consumer in
`check_for_built_views`.
The problem is that we check if we pass the first token F with the
condition `_step.current_token() >= it->first_token` whenever we consume
a new partition or the current_token goes back to the minimum token.
But suppose that we don't have any partitions with a token greater than
or equal to the first token (this could happen if the partition with
token F was moved to another node for example), then this condition will never be
satisfied, and we don't detect correctly when we pass F. Instead, we
go back to the minimum token, building the same token ranges again,
in a possibly infinite loop.
To fix this we add another step when reaching the end of the reader's
stream. When this happens it means we don't have any more fragments to
consume until the end of the range, so we advance the current_token to
the end of the range, simulating a partition, and check for built views
in that range.
Fixesscylladb/scylladb#21829Closesscylladb/scylladb#22493
(cherry picked from commit 6d34125eb7)
Closesscylladb/scylladb#22606
Currently, /task_manager/task_status_recursive/{task_id} and
/task_manager/task_status/{task_id} unregister queries task if it
has already finished.
The status should not disappear after being queried. Do not unregister
finished task when its status or recursive status is queried.
(cherry picked from commit 18cc79176a)
In the following patches, get_status won't be unregistering finished
tasks. However, tests need a functionality to drop a task, so that
they could manipulate only with the tasks for operations that were
invoked by these tests.
Add /task_manager/drain/{module} to unregister all finished tasks
from the module. Add respective nodetool command.
(cherry picked from commit e37d1bcb98)
In main.cc storage_service is started before and stopped after
repair_service. storage_service keeps a reference to sharded
repair_service and calls its methods, but nothing ensures that
repair_service's local instance would be alive for the whole
execution of the method.
Add a gate to repair_service and enter it in storage_service
before executing methods on local instances of repair_service.
Fixes: #21964.
Closesscylladb/scylladb#22145
(cherry picked from commit 32ab58cdea)
Closesscylladb/scylladb#22318
Said fields in statistics are of type
`disk_array<uint32_t, disk_string<uint16_t>>` and currently are handled
as array of regular strings. However these fields store exploded
clustering keys, so the elements store binary data and converting to
string can yield invalid UTF-8 characters that certain JSON parsers (jq,
or python's json) can choke on. Fix this by treating them as binary and
using `to_hex()` to convert them to string. This requires some massaging
of the json_dumper: passing field offset to all visit() methods and
using a caller-provided disk-string to sstring converter to convert disk
strings to sstring, so in the case of statistics, these fields can be
intercepted and properly handled.
While at it, the type of these fields is also fixed in the
documentation.
Before:
"min_column_names": [
"��Z���\u0011�\u0012ŷ4^��<",
"�2y\u0000�}\u007f"
],
"max_column_names": [
"��Z���\u0011�\u0012ŷ4^��<",
"}��B\u0019l%^"
],
After:
"min_column_names": [
"9dd55a92bc8811ef12c5b7345eadf73c",
"80327900e2827d7f"
],
"max_column_names": [
"9dd55a92bc8811ef12c5b7345eadf73c",
"7df79242196c255e"
],
Fixes: #22078Closesscylladb/scylladb#22225
(cherry picked from commit f899f0e411)
Closesscylladb/scylladb#22296
The sstable loader relied on the generation id to provide an efficient
hint about the shard that owns an sstable. But, this hint was rendered
ineffective with the introduction of UUID generation, as the shard id
was no longer embedded in the generation id. This also became suboptimal
with the introduction of tablets. Commit 0c77f77 addressed this issue by
reading the minimum from disk to determine sstable ownership but this
improvement was lost with commit 63f1969, which optimistically assumed
that hints would work most of the time, which isn't true.
This commit restores that change - shard id of a table is deduced by
reading minially from disk and then the sstable is fully loaded only if
it belongs to the local shard. This patch also adds a testcase to verify
that the sstable are loaded only in their respective shards.
Fixes#21015
This fixes a regression and should be backported.
- (cherry picked from commit d2ba45a01f)
- (cherry picked from commit 6e3ecc70a6)
- (cherry picked from commit 63100b34da)
Parent PR: #22263Closesscylladb/scylladb#22376
* github.com:scylladb/scylladb:
sstable_directory: do not load remote sstables in process_descriptor
sstable_directory: reintroduce `get_shards_for_this_sstable()`
The methods to resolve a key/token/range to a table are all noexcept.
Yet the method below all of these, `storage_group_for_id()` can throw.
This means that if due to any mistake a tablet without local replica is
attempted to be looked up, it will result in a crash, as the exception
bubbles up into the noexcept methods.
There is no value in pretending that looking up the tablet replica is
noexcept, remove the noexcept specifiers so that any bad lookup only
fails the operation at hand and doesn't crash the node. This is
especially relevant to replace, which still has a window where writes
can arrive for tablets that don't (yet) have a local replica. Currently,
this results in a crash. After this patch, this will only fail the
writes and the replace can move on.
Fixes: #21480Closesscylladb/scylladb#22251
(cherry picked from commit 55963f8f79)
Closesscylladb/scylladb#22379
Currently, data sync repair handles most no_such_keyspace exceptions,
but it omits the preparation phase, where the exception could be thrown
during make_global_effective_replication_map.
Skip the keyspace repair if no_such_keyspace is thrown during preparations.
Fixes: #22073.
Requires backport to 6.1 and 6.2 as they contain the bug
- (cherry picked from commit bfb1704afa)
- (cherry picked from commit 54e7f2819c)
Parent PR: #22473Closesscylladb/scylladb#22541
* github.com:scylladb/scylladb:
test: add test to check if repair handles no_such_keyspace
repair: handle keyspace dropped
During raft upgrade, a node may gossip about a new CDC generation that
was propagated through raft. The node that receives the generation by
gossip may have not applied the raft update yet, and it will not find
the generation in the system tables. We should consider this error
non-fatal and retry to read until it succeeds or becomes obsolete.
Another issue is when we fail with a "fatal" exception and not retrying
to read, the cdc metadata is left in an inconsistent state that causes
further attempts to insert this CDC generation to fail.
What happens is we complete preparing the new generation by calling `prepare`,
we insert an empty entry for the generation's timestamp, and then we fail. The
next time we try to insert the generation, we skip inserting it because we see
that it already has an entry in the metadata and we determine that
there's nothing to do. But this is wrong, because the entry is empty,
and we should continue to insert the generation.
To fix it, we change `prepare` to return `true` when the entry already
exists but it's empty, indicating we should continue to insert the
generation.
Fixesscylladb/scylladb#21227Closesscylladb/scylladb#22093
(cherry picked from commit 4f5550d7f2)
Closesscylladb/scylladb#22545
This adds a reproducer for #22431
In cases where a tablet storage group manager had more than one storage
group, it was possible to create compaction groups outside the group0
guard, which could create problems with operations which should exclude
with compaction group creation.
(cherry picked from commit 8bff7786a8)
tablet_storage_group_manager::all_storage_groups_split() calls set_split_mode()
for each of its storage groups to create split ready compaction groups. It does
this by iterating through storage groups using std::ranges::all_of() which is
not guaranteed to iterate through the entire range, and will stop iterating on
the first occurance of the predicate (set_split_mode()) returning false.
set_split_mode() creates the split compaction groups and returns false if the
storage group's main compaction group or merging groups are not empty. This
means that in cases where the tablet storage group manager has non-empty
storage groups, we could have a situation where split compaction groups are not
created for all storage groups.
The missing split compaction groups are later created in
tablet_storage_group_manager::split_all_storage_groups() which also calls
set_split_mode(), and that is the reason why split completes successfully. The
problem is that tablet_storage_group_manager::all_storage_groups_split() runs
under a group0 guard, and tablet_storage_group_manager::split_all_storage_groups()
does not. This can cause problems with operations which should exclude with
compaction group creation. i.e. DROP TABLE/DROP KEYSPACE
(cherry picked from commit 24e8d2a55c)
Currently, data sync repair handles most no_such_keyspace exceptions,
but it omits the preparation phase, where the exception could be thrown
during make_global_effective_replication_map.
Skip the keyspace repair if no_such_keyspace is thrown during preparations.
(cherry picked from commit bfb1704afa)
Fixes a race condition where COMPRESSOR_NAME in zstd.cc could be
initialized before compressor::namespace_prefix due to undefined
global variable initialization order across translation units. This
was causing ZstdCompressor to be unregistered in release builds,
making it impossible to create tables with Zstd compression.
Replace the global namespace_prefix variable with a function that
returns the fully qualified compressor name. This ensures proper
initialization order and fixes the registration of the ZstdCompressor.
Fixesscylladb/scylladb#22444
Signed-off-by: Kefu Chai <kefu.chai@scylladb.com>
Closesscylladb/scylladb#22451
(cherry picked from commit 4a268362b9)
Closesscylladb/scylladb#22510
Fixes#20633
Cannot assert on actual request_controller when releasing permit, as the
release, if we have waiters in queue, will subtract some units to hand to them.
Instead assert on permit size + waiter status (and if zero, also controller value)
* v2 - use SCYLLA_ASSERT
(cherry picked from commit 58087ef427)
Closesscylladb/scylladb#22455
When a node is bootstrapped and joined a cluster as a non-voter and changes it's role to a voter, errors can occur while committing a new Raft record, for instance, if the Raft leader changes during this time. These errors are not critical and should not cause a node crash, as the action can be retried.
Fixes scylladb/scylladb#20814
Backport: This issue occurs frequently and disrupts the CI workflow to some extent. Backports are needed for versions 6.1 and 6.2.
- (cherry picked from commit 775411ac56)
- (cherry picked from commit 16053a86f0)
- (cherry picked from commit 8c48f7ad62)
- (cherry picked from commit 3da4848810)
- (cherry picked from commit 228a66d030)
Parent PR: #22253Closesscylladb/scylladb#22358
* github.com:scylladb/scylladb:
raft: refactor `remove_from_raft_config` to use a timed `modify_config` call.
raft: Refactor functions using `modify_config` to use a common wrapper for retrying.
raft: Handle non-critical config update errors in when changing status to voter.
test: Add test to check that a node does not fail on unknown commit status error when starting up.
raft: Add run_op_with_retry in raft_group0.
To avoid potential hangs during the `remove_from_raft_config` operation, use a timed `modify_config` call.
This ensures the operation doesn't get stuck indefinitely.
(cherry picked from commit 228a66d030)
for retrying.
There are several places in `raft_group0` where almost identical code is
used for retrying `modify_config` in case of `commit_status_unknown`
error. To avoid code duplication all these places were changed to
use a new wrapper `run_op_with_retry`.
(cherry picked from commit 3da4848810)
The sstable loader relied on the generation id to provide an efficient
hint about the shard that owns an sstable. But, this hint was rendered
ineffective with the introduction of UUID generation, as the shard id
was no longer embedded in the generation id. This also became suboptimal
with the introduction of tablets. Commit 0c77f77 addressed this issue by
reading the minimum from disk to determine sstable ownership but this
improvement was lost with commit 63f1969, which optimistically assumed
that hints would work most of the time, which isn't true.
This commit restores that change - shard id of a table is deduced by
reading minially from disk and then the sstable is fully loaded only if
it belongs to the local shard. This patch also adds a testcase to verify
that the sstable are loaded only in their respective shards.
Fixes#21015
Signed-off-by: Lakshmi Narayanan Sreethar <lakshmi.sreethar@scylladb.com>
(cherry picked from commit 63100b34da)
Reintroduce `get_shards_for_this_sstable()` that was removed in commit
ad375fbb. This will be used in the following patch to ensure that an
sstable is loaded only once.
Signed-off-by: Lakshmi Narayanan Sreethar <lakshmi.sreethar@scylladb.com>
(cherry picked from commit d2ba45a01f)
When adding a new view for building, first write the status to the
system tables and then add the view building step that will start
building it.
Otherwise, if we start building it before the status is written to the
table, it may happen that we complete building the view, write the
SUCCESS status, and then overwrite it with the STARTED status. The
view_build_status table will remain in incorrect state indicating the
view building is not complete.
Fixes#20638
The PR contains few additional small fixes in separate commits related to the view build status table.
It addresses flakiness issues in tests that use the view build status table to determine when view building is complete. The table may be in incorrect state due to these issues, having a row with status STARTED when it actually finished building the view, which will cause us to wait in `wait_for_view` until it timeouts.
For testing I used a test similar to `test_view_build_status_with_replace_node`, but it only creates the views and calls `wait_for_view`. Without these commits it failed in 4/1024 runs, and with the commits it passed 2048/2048.
backport to fix the bugs that affects previous versions and improve CI stability
- (cherry picked from commit b1be2d3c41)
- (cherry picked from commit 1104411f83)
- (cherry picked from commit 7a6aec1a6c)
Parent PR: #22307Closesscylladb/scylladb#22356
* github.com:scylladb/scylladb:
view_builder: hold semaphore during entire startup
view_builder: pass view name by value to write_view_build_status
view_builder: write status to tables before starting to build
Guard the whole view builder startup routine by holding the semaphore
until it's done instead of releasing it early, so that it's not
intercepted by migration notifications.
(cherry picked from commit 7a6aec1a6c)
The function write_view_build_status takes two lambda functions and
chooses which of them to run depending on the upgrade state. It might
run both of them.
The parameters ks_name and view_name should be passed by value instead
of by reference because they are moved inside each lambda function.
Otherwise, if both lambdas are run, the second call operates on invalid
values that were moved.
(cherry picked from commit 1104411f83)
In this PR, we pair draining the view builder with its start.
To better understand what was done and why, let's first look at the
situation before this commit and the context of it:
(a) The following things happened in order:
1. The view builder would be constructed.
2. Right after that, a deferred lambda would be created to stop the
view builder during shutdown.
3. group0_service would be started.
4. A deferred lambda stopping group0_service would be created right
after that.
5. The view builder would be started.
(b) Because the view builder depends on group0_client, it couldn't be
started before starting group0_service. On the other hand, other
services depend on the view builder, e.g. the stream manager. That
makes changing the order of initialization a difficult problem,
so we want to avoid doing that unless we're sure it's the right
choice.
(c) Since the view builder uses group0_client, there was a possibility
of running into a segmentation fault issue in the following
scenario:
1. A call to `view_builder::mark_view_build_success()` is issued.
2. We stop group0_service.
3. `view_builder::mark_view_build_success()` calls
`announce_with_raft()`, which leads to a use-after-free because
group0_service has already been destroyed.
This very scenario took place in scylladb/scylladb#20772.
Initially, we decided to solve the issue by initializing
group0_service a bit earlier (scylladb/scylladb@7bad8378c7).
Unfortunately, it led to other issues described in scylladb/scylladb#21534,
so we revert that patch. These changes are the second attempt
to the problem where we want to solve it in a safer manner.
The solution we came up with is to pair the start of the view builder
with a deferred lambda that deinitializes it by calling
`view_builder::drain()`. No other component of the system should be
able to use the view builder anymore, so it's safe to do that.
Furthermore, that pairing makes the analysis of
initialization/deinitialization order much easier. We also solve the
aformentioned use-after-free issue because the view builder itself
will no longer attempt to use group0_client.
Note that we still pair a deferred lambda calling `view_builder::stop()`
with the construction of the view builder; that function will also call
`view_builder::drain()`. Another notable thing is `view_builder::drain()`
may be called earlier by `storage_service::do_drain()`. In other words,
these changes cover the situation when Scylla runs into a problem when
starting up.
Backport: The patch I'm reverting made it to 6.2, so we want to backport this one there too.
Fixesscylladb/scylladb#20772Fixesscylladb/scylladb#21534
- (cherry picked from commit a5715086a4)
- (cherry picked from commit 06ce976370)
- (cherry picked from commit d1f960eee2)
Parent PR: #21909Closesscylladb/scylladb#22331
* github.com:scylladb/scylladb:
test/topology_custom: Add test for Scylla with disabled view building
main, view: Pair view builder drain with its start
Revert "main,cql_test_env: start group0_service before view_builder"
to voter.
When a node is bootstrapped and joins a cluster as a non-voter, errors can occur while committing
a new Raft record, for instance, if the Raft leader changes during this time. These errors are not
critical and should not cause a node crash, as the action can be retried.
Fixesscylladb/scylladb#20814
(cherry picked from commit 8c48f7ad62)
error when starting up.
Test that a node is starting successfully if while joining a cluster and becoming a voter, it
receives an unknown commit status error.
Test for scylladb/scylladb#20814
(cherry picked from commit 16053a86f0)
Since when calling `modify_config` it's quite often we need to do
retries, to avoid code duplication, a function wrapper that allows
a function to be called with automatic retries in case of failures
was added.
(cherry picked from commit 775411ac56)
When adding a new view for building, first write the status to the
system tables and then add the view building step that will start
building it.
Otherwise, if we start building it before the status is written to the
table, it may happen that we complete building the view, write the
SUCCESS status, and then overwrite it with the STARTED status. The
view_build_status table will remain in incorrect state indicating the
view building is not complete.
Fixesscylladb/scylladb#20638
(cherry picked from commit b1be2d3c41)
This update addresses an issue in the mutation diff calculation algorithm used during read repair. Previously, the algorithm used `token` as the hashmap key. Since `token` is calculated basing on the Murmur3 hash function, it could generate duplicate values for different partition keys, causing corruption in the affected rows' values.
Fixes scylladb/scylladb#19101
Since the issue affects all the relevant scylla versions, backport to: 6.1, 6.2
- (cherry picked from commit e577f1d141)
- (cherry picked from commit 39785c6f4e)
- (cherry picked from commit 155480595f)
Parent PR: #21996Closesscylladb/scylladb#22298
* github.com:scylladb/scylladb:
storage_proxy/read_repair: Remove redundant 'schema' parameter from `data_read_resolver::resolve` function.
storage_proxy/read_repair: Use `partition_key` instead of `token` key for mutation diff calculation hashmap.
test: Add test case for checking read repair diff calculation when having conflicting keys.
Before this commit, there doesn't seem to have been a test verifying that
starting and shutting down Scylla behave correctly when the configuration
option `view_building` is set to false. In these changes, we add one.
(cherry picked from commit d1f960eee2)
In these changes, we pair draining the view builder with its start.
To better understand what was done and why, let's first look at the
situation before this commit and the context of it:
(a) The following things happened in order:
1. The view builder would be constructed.
2. Right after that, a deferred lambda would be created to stop the
view builder during shutdown.
3. group0_service would be started.
4. A deferred lambda stopping group0_service would be created right
after that.
5. The view builder would be started.
(b) Because the view builder depends on group0_client, it couldn't be
started before starting group0_service. On the other hand, other
services depend on the view builder, e.g. the stream manager. That
makes changing the order of initialization a difficult problem,
so we want to avoid doing that unless we're sure it's the right
choice.
(c) Since the view builder uses group0_client, there was a possibility
of running into a segmentation fault issue in the following
scenario:
1. A call to `view_builder::mark_view_build_success()` is issued.
2. We stop group0_service.
3. `view_builder::mark_view_build_success()` calls
`announce_with_raft()`, which leads to a use-after-free because
group0_service has already been destroyed.
This very scenario took place in scylladb/scylladb#20772.
Initially, we decided to solve the issue by initializing
group0_service a bit earlier (scylladb/scylladb@7bad8378c7).
Unfortunately, it led to other issues described in scylladb/scylladb#21534.
We reverted that change in the previous commit. These changes are the
second attempt to the problem where we want to solve it in a safer manner.
The solution we came up with is to pair the start of the view builder
with a deferred lambda that deinitializes it by calling
`view_builder::drain()`. No other component of the system should be
able to use the view builder anymore, so it's safe to do that.
Furthermore, that pairing makes the analysis of
initialization/deinitialization order much easier. We also solve the
aformentioned use-after-free issue because the view builder itself
will no longer attempt to use group0_client.
Note that we still pair a deferred lambda calling `view_builder::stop()`
with the construction of the view builder; that function will also call
`view_builder::drain()`. Another notable thing is `view_builder::drain()`
may be called earlier by `storage_service::do_drain()`. In other words,
these changes cover the situation when Scylla runs into a problem when
starting up.
Fixesscylladb/scylladb#20772
(cherry picked from commit 06ce976370)
The patch solved a problem related to an initialization order
(scylladb/scylladb#20772), but we ran into another one: scylladb/scylladb#21534.
After moving the initialization of group0_service, it ended up being destroyed
AFTER the CDC generation service would. Since CDC generations are accessed
in `storage_service::topology_state_load()`:
```
for (const auto& gen_id : _topology_state_machine._topology.committed_cdc_generations) {
rtlogger.trace("topology_state_load: process committed cdc generation {}", gen_id);
co_await _cdc_gens.local().handle_cdc_generation(gen_id);
```
we started getting the following failure:
```
Service &seastar::sharded<cdc::generation_service>::local() [Service = cdc::generation_service]: Assertion `local_is_initialized()' failed.
```
We're reverting the patch to go back to a more stable version of Scylla
and in the following commit, we'll solve the original issue in a more
systematic way.
This reverts commit 7bad8378c7.
(cherry picked from commit a5715086a4)
Add the test file name to `ScyllaClusterManager` log file names alongside the test function name.
This avoids race conditions when tests with the same function names are executed simultaneously.
Fixesscylladb/scylladb#21807
Backport: not needed since this is a fix in the testing scripts.
Closesscylladb/scylladb#22192
(cherry picked from commit 2f1731c551)
Closesscylladb/scylladb#22249
function.
The `data_read_resolver` class inherits from `abstract_read_resolver`, which already includes the
`schema_ptr _schema` member. Therefore, using a separate function parameter in `data_read_resolver::resolve`
initialized with the same variable in `abstract_read_executor` is redundant.
(cherry picked from commit 155480595f)
diff calculation hashmap.
This update addresses an issue in the mutation diff calculation algorithm used during read repair.
Previously, the algorithm used `token` as the hashmap key. Since `token` is calculated basing on
the Murmur3 hash function, it could generate duplicate values for different partition keys, causing
corruption in the affected rows' values.
Fixesscylladb/scylladb#19101
(cherry picked from commit 39785c6f4e)
conflicting keys.
The test updates two rows with keys that result in a Murmur3 hash collision, which
is used to generate Scylla tokens. These tokens are involved in read repair diff
calculations. Due to the identical token values, a hash map key collision occurs.
Consequently, an incorrect value from the second row (with a different primary key)
is then sent for writing as 'repaired', causing data corruption.
(cherry picked from commit e577f1d141)
This series attempts to get read of flakiness in cache_algorithm_test by solving two problems.
Problem 1:
The test needs to create some arbitrary partition keys of a given size. It intends to create keys of the form:
0x0000000000000000000000000000000000000000...
0x0100000000000000000000000000000000000000...
0x0200000000000000000000000000000000000000...
But instead, unintentionally, it creates partially initialized keys of the form: 0x0000000000000000garbagegarbagegarbagegar...
0x0100000000000000garbagegarbagegarbagegar...
0x0200000000000000garbagegarbagegarbagegar...
Each of these keys is created several times and -- for the test to pass -- the result must be the same each time.
By coincidence, this is usually the case, since the same allocator slots are used. But if some background task happens to overwrite the allocator slot during a preemption, the keys used during "SELECT" will be different than the keys used during "INSERT", and the test will fail due to extra cache misses.
Problem 2:
Cache stats are global, so there's no good way to reliably
verify that e.g. a given read causes 0 cache misses,
because something done by Scylla in a background can trigger a cache miss.
This can cause the test to fail spuriously.
With how the test framework and the cache are designed, there's probably
no good way to test this properly. It would require ensuring that cache
stats are per-read, or at least per-table, and that Scylla's background
activity doesn't cause enough memory pressure to evict the tested rows.
This patch tries to deal with the flakiness without deleting the test
altogether by letting it retry after a failure if it notices that it
can be explained by a read which wasn't done by the test.
(Though, if the test can't be written well, maybe it just shouldn't be written...)
Fixesscylladb/scylladb#21536
(cherry picked from commit 1fffd976a4)
(cherry picked from commit 6caaead4ac)
Parent PR: scylladb/scylladb#21948Closesscylladb/scylladb#22228
* github.com:scylladb/scylladb:
cache_algorithm_test: harden against stats being confused by background activity
cache_algorithm_test: fix a use of an uninitialized variable
Currently task_manager_module::is_aborted checks the tasks local
to caller's shard on a given shard.
Fix the method to check the task map local to the given shard.
Fixes: #22156.
Closesscylladb/scylladb#22161
(cherry picked from commit a91e03710a)
Closesscylladb/scylladb#22197
When we open a PR with conflicts, the PR owner gets a notification about the assignment but has no idea if this PR is with conflicts or not (in Scylla it's important since CI will not start on draft PR)
Let's add a comment to notify the user we have conflicts
Closesscylladb/scylladb#21939
(cherry picked from commit 2e6755ecca)
Closesscylladb/scylladb#22190
When an sstable is unlinked, it remains in the _active list of the
sstable manager. Its memory might be reclaimed and later reloaded,
causing issues since the sstable is already unlinked. This patch updates
the on_unlink method to reclaim memory from the sstable upon unlinking,
remove it from memory tracking, and thereby prevent the issues described
above.
Added a testcase to verify the fix.
Fixes#21887
This is a bug fix in the bloom filter reload/reclaim mechanism and should be backported to older versions.
Closesscylladb/scylladb#21895
* github.com:scylladb/scylladb:
sstables_manager: reclaim memory from sstables on unlink
sstables_manager: introduce reclaim_memory_and_stop_tracking_sstable()
sstables: introduce disable_component_memory_reload()
sstables_manager: log sstable name when reclaiming components
(cherry picked from commit d4129ddaa6)
Closesscylladb/scylladb#21998
Cache stats are global, so there's no good way to reliably
verify that e.g. a given read causes 0 cache misses,
because something done by Scylla in a background can trigger a cache miss.
This can cause the test to fail spuriously.
With how the test framework and the cache are designed, there's probably
no good way to test this properly. It would require ensuring that cache
stats are per-read, or at least per-table, and that Scylla's background
activity doesn't cause enough memory pressure to evict the tested rows.
This patch tries to deal with the flakiness without deleting the test
altogether by letting it retry after a failure if it notices that it
can be explained by a read which wasn't done by the test.
(Though, if the test can't be written well, maybe it just shouldn't be written...)
(cherry picked from commit 6caaead4ac)
The test needs to create some arbitrary partition keys of a given size.
It intends to create keys of the form:
0x0000000000000000000000000000000000000000...
0x0100000000000000000000000000000000000000...
0x0200000000000000000000000000000000000000...
But instead, unintentionally, it creates partially initialized keys of the form:
0x0000000000000000garbagegarbagegarbagegar...
0x0100000000000000garbagegarbagegarbagegar...
0x0200000000000000garbagegarbagegarbagegar...
Each of these keys is created several times and -- for the test to pass --
the result must be the same each time.
By coincidence, this is usually the case, since the same allocator slots are used.
But if some background task happens to overwrite the allocator slot during a
preemption, the keys used during "SELECT" will be different than the keys used
during "INSERT", and the test will fail due to extra cache misses.
(cherry picked from commit 1fffd976a4)
New logs allow us to easily distinguish two cases in which
waiting for apply times out:
- the node didn't receive the entry it was waiting for,
- the node received the entry but didn't apply it in time.
Distinguishing these cases simplifies reasoning about failures.
The first case indicates that something went wrong on the leader.
The second case indicates that something went wrong on the node
on which waiting for apply timed out.
As it turns out, many different bugs result in the `read_barrier`
(which calls `wait_for_apply`) timeout. This change should help
us in debugging bugs like these.
We want to backport this change to all supported branches so that
it helps us in all tests.
Fixesscylladb/scylladb#22160Closesscylladb/scylladb#22159
The series contains small fixes to the gossiper one of which fixes#21930. Others I noticed while debugged the issue.
Fixes: #21930
(cherry picked from commit 91cddcc17f)
Parent PR: #21956Closesscylladb/scylladb#21991
* github.com:scylladb/scylladb:
gossiper: do not reset _just_removed_endpoints in non raft mode
gossiper: do not call apply for the node's old state
In the current scenario, if during startup, a node crashes after initiating gossip and before joining group0,
then it keeps floating in the gossiper forever because the raft based gossiper purging logic is only effective
once node joins group0. This orphan node hinders the successor node from same ip to join cluster since it collides
with it during gossiper shadow round.
This commit intends to fix this issue by adding a background thread which periodically checks for such orphan entries in
gossiper and removes them.
A test is also added in to verify this logic. This test fails without this background thread enabled, hence
verifying the behavior.
Fixes: scylladb/scylladb#20082Closesscylladb/scylladb#21600
(cherry picked from commit 6c90a25014)
Closesscylladb/scylladb#21822
The migration process is doing read with consistency level ALL,
requiring all nodes to be alive.
Fixesscylladb/scylladb#20754
The PR should be backported to 6.2, this version has view builder on group0.
Closesscylladb/scylladb#21708
* github.com:scylladb/scylladb:
test/topology_custom/test_view_build_status: add reproducer
service/topology_coordinator: migrate view builder only if all nodes are up
(cherry picked from commit def51e252d)
Closesscylladb/scylladb#21850
This patch reverts 324b3c43c0 and adds synchronous versions of `service_level_controller::find_effective_service_level()` and `client_state::maybe_update_per_service_level_params()`.
It isn't safe to do asynchronous calls in `for_each_gently`, as the
connection may be disconnected while a call in callback preempts.
Fixesscylladb/scylladb#21801Closesscylladb/scylladb#21761
* github.com:scylladb/scylladb:
Revert "generic_server: use async function in `for_each_gently()`"
transport/server: use synchronous calls in `for_each_gently` callback
service/client_state: add synchronous method to update service level params
qos/service_level_controller: add `find_cached_effective_service_level`
(cherry picked from commit c601f7a359)
Closesscylladb/scylladb#21849
Otherwise, the read will be considered as on-cpu during promoted index
search, which will severely underutlize the disk because by default
on-cpu concurrency is 1.
I verified this patch on the worst case scenario, where the workload
reads missing rows from a large partition. So partition index is
cached (no IO) and there is no data file IO (relies on https://github.com/scylladb/scylladb/pull/20522).
But there is IO during promoted index search (via cached_file).
Before the patch this workload was doing 4k req/s, after the patch it does 30k req/s.
The problem is much less pronounced if there is data file or partition index IO involved
because that IO will signal read concurrency semaphore to invite more concurrency.
Fixes#21325
(cherry picked from commit 868f5b59c4)
(cherry picked from commit 0f2101b055)
Refs #21323Closesscylladb/scylladb#21358
* github.com:scylladb/scylladb:
utils: cached_file: Mark permit as awaiting on page miss
utils: cached_file: Push resource_unit management down to cached_file
Update the service level cache in the node startup sequence, after the
service level and auth service are initialized.
The cache update depends on the service level data accessor being set
and the auth service being initialized. Before the commit, it may happen that a
cache update is not triggered after the initialization. The commit adds
an explicit call to update the cache where it is guaranteed to be ready.
Fixesscylladb/scylladb#21763Closesscylladb/scylladb#21773
(cherry picked from commit 373855b493)
Closesscylladb/scylladb#21893
The function get_service_levels is used to retrieve all service levels
and it is called from multiple different contexts.
Importantly, it is called internally from the context of group0 state reload,
where it should be executed with a long timeout, similarly to other
internal queries, because a failure of this function affects the entire
group0 client, and a longer timeout can be tolerated.
The function is also called in the context of the user command LIST
SERVICE LEVELS, and perhaps other contexts, where a shorter timeout is
preferred.
The commit introduces a function parameter to indicate whether the
context is internal or not. For internal context, a long timeout is
chosen for the query. Otherwise, the timeout is shorter, the same as
before. When the distinction is not important, a default value is
chosen which maintains the same behavior.
The main purpose is to fix the case where the timeout is too short and causes
a failure that propagates and fails the group0 client.
Fixesscylladb/scylladb#20483Closesscylladb/scylladb#21748
(cherry picked from commit 53224d90be)
Closesscylladb/scylladb#21890
Topology request table may change between the code reading it and
calling to cv::when() since reading is a preemption point. In this
case cv:signal can be missed. Detect that there was no signal in between
reading and waiting by introducing reload_count which is increased each
time the state is reloaded and signaled. If the counter is different
before and after reading the state may have change so re-check it again
instead of sleeping.
Closesscylladb/scylladb#21713
* github.com:scylladb/scylladb:
topology_coordinator: introduce reload_count in topology state and use it to prevent race
storage_service: use conditional_variable::when in co-routines consistently
(cherry picked from commit 8f858325b6)
Closesscylladb/scylladb#21803
Otherwise, the read will be considered as on-cpu during promoted index
search, which will severely underutlize the disk because by default
on-cpu concurrency is 1.
I verified this patch on the worst case scenario, where the workload
reads missing rows from a large partition. So partition index is
cached (no IO) and there is no data file IO. But there is IO during
promoted index search (via cached_file). Before the patch this
workload was doing 4k req/s, after the patch it does 30k req/s.
The problem is much less pronounced if there is data file or index
file IO involved because that IO will signal read concurrency
semaphore to invite more concurrency.
(cherry picked from commit 0f2101b055)
It saves us permit operations on the hot path when we hit in cache.
Also, it will lay the ground for marking the permit as awaiting later.
(cherry picked from commit 868f5b59c4)
In commit 2596d157, we added a condition to run auto-backport.py only
when the GitHub Action is triggered by a push to the default branch.
However, this introduced an unexpected error due to incorrect condition
handling.
Problem:
- `github.event.before` evaluates to an empty string
- GitHub Actions' single-pass expression evaluation system causes
the step to always execute, regardless of `github.event_name`
Despite GitHub's documentation suggesting that ${{ }} can be omitted,
it recommends using explicit ${{}} expressions for compound conditions.
Changes:
- Use explicit ${{}} expression for compound conditions
- Avoid string interpolation in conditional statements
Root Cause:
The previous implementation failed because of how GitHub Actions
evaluates conditional expressions, leading to an unintended script
execution and a 404 error when attempting to compare commits.
Example Error:
```
python .github/scripts/auto-backport.py --repo scylladb/scylladb --base-branch refs/heads/master --commits ..2b07d93beac7bc83d955dadc20ccc307f13f20b6
shell: /usr/bin/bash -e {0}
env:
DEFAULT_BRANCH: master
GITHUB_TOKEN: ***
Traceback (most recent call last):
File "/home/runner/work/scylladb/scylladb/.github/scripts/auto-backport.py", line 201, in <module>
main()
File "/home/runner/work/scylladb/scylladb/.github/scripts/auto-backport.py", line 162, in main
commits = repo.compare(start_commit, end_commit).commits
File "/usr/lib/python3/dist-packages/github/Repository.py", line 888, in compare
headers, data = self._requester.requestJsonAndCheck(
File "/usr/lib/python3/dist-packages/github/Requester.py", line 353, in requestJsonAndCheck
return self.__check(
File "/usr/lib/python3/dist-packages/github/Requester.py", line 378, in __check
raise self.__createException(status, responseHeaders, output)
github.GithubException.UnknownObjectException: 404 {"message": "Not Found", "documentation_url": "https://docs.github.com/rest/commits/commits#compare-two-commits", "status": "404"}
```
Fixesscylladb/scylladb#21808
Signed-off-by: Kefu Chai <kefu.chai@scylladb.com>
Closesscylladb/scylladb#21809
(cherry picked from commit e04aca7efe)
Closesscylladb/scylladb#21820
Scrub compaction can pick up input sstables from maintenance sstable set
but on compaction completion, it doesn't update the maintenance set
leaving the original sstable in set after it has been scrubbed. To fix
this, on compaction completion has to update the maintenance sstable if
the input originated from there. This PR solves the issue by updating the
correct sstable_sets on compaction completion.
Fixes#20030
This issue has existed since the introduction of main and maintenance sstable sets into scrub compaction. It would be good to have the fix backported to versions 6.1 and 6.2.
Closesscylladb/scylladb#21582
* github.com:scylladb/scylladb:
compaction: remove unused `update_sstable_lists_on_off_strategy_completion`
compaction_group: replace `update_sstable_lists_on_off_strategy_completion`
compaction_group: rename `update_main_sstable_list_on_compaction_completion`
compaction_group: update maintenance sstable set on scrub compaction completion
compaction_group: store table::sstable_list_builder::result in replacement_desc
table::sstable_list_builder: remove old sstables only from current list
table::sstable_list_builder: return removed sstables from build_new_list
(cherry picked from commit 58baeac0ad)
Closesscylladb/scylladb#21790
schema_change_test currently fails due to failure to start a cql test
env in unit tests after the point where this is called (in one of the
test cases):
forward_jump_clocks(std::chrono::seconds(60*60*24*31));
The problem manifests with a failure to join the cluster due to
missing_column exception ("missing_column: done") being thrown from
system_keyspace::get_topology_request_state(). It's a symptom of
join request being missing in system.topology_requests. It's missing
because the row is expired.
When request is created, we insert the
mutations with intended TTL of 1 month. The actual TTL value is
computed like this:
ttl_opt topology_request_tracking_mutation_builder::ttl() const {
return std::chrono::duration_cast<std::chrono::seconds>(std::chrono::microseconds(_ts)) + std::chrono::months(1)
- std::chrono::duration_cast<std::chrono::seconds>(gc_clock::now().time_since_epoch());
}
_ts comes from the request_id, which is supposed to be a timeuuid set
from current time when request starts. It's set using
utils::UUID_gen::get_time_UUID(). It reads the system clock without
adding the clock offset, so after forward_jump_clocks(), _ts and
gc_clock::now() may be far off. In some cases the accumulated offset
is larger than 1month and the ttl becomes negative, causing the
request row to expire immediately and failing the boot sequence.
The fix is to use db_clock, which respects offsets and is consistent
with gc_clock.
The test doesn't fail in CI becuase there each test case runs in a
separate process, so there is no bootstrap attempt (by new cql test
env) after forward_jump_clocks().
Closes scylladb/scylladb#21558
(cherry picked from commit 1d0c6aa26f)
Closesscylladb/scylladb#21584Fixes#21581
Task status information from nodetool commands is not retained permanently:
- Status of completed tasks is only kept for `task_ttl_in_seconds`
- Status is removed after being queried, making it a one-time operation
This behavior is important for users to understand since subsequent
queries for the same completed task will not return any information.
Add documentation to make this clear to users.
Fixesscylladb/scylladb#21757
Signed-off-by: Kefu Chai <kefu.chai@scylladb.com>
Closesscylladb/scylladb#21386
(cherry picked from commit afeff0a792)
Closesscylladb/scylladb#21759
Building upon commit 69b47694, this change addresses a subtle synchronization
weakness in node visibility checks during recovery mode testing.
Previous Approach:
- Waited only for the first node to see its peers
- Insufficient to guarantee full cluster consistency
Current Solution:
1. Implement comprehensive node visibility verification
2. Ensure all nodes mutually recognize each other
3. Prevent potential schema propagation race conditions
Key Improvements:
- Robust cluster state validation before keyspace creation
- Eliminate partial visibility scenarios
Fixesscylladb/scylladb#21724
Signed-off-by: Kefu Chai <kefu.chai@scylladb.com>
Closesscylladb/scylladb#21726
(cherry picked from commit 65949ce607)
Closesscylladb/scylladb#21734
Before these changes, we didn't wait for the materialized views to
finish building before writing to the base table. That led to generating
an additional view update, which, in turn, led to test failures.
The scenario corresponding to the summary above looked like this:
1. The test creates an empty table and MVs on it.
2. The view builder starts, but it doesn't finish immediately.
3. The test performs mutations to the base table. Since the views
already exist, view updates are generated.
4. Finally, the view builder finishes. It notices that the base
table has a row, so it generates a view update for it because
it doesn't notice that we already have data in the view.
We solve it by explicitly waiting for both views to finish building
and only then start writing to the base table.
Additionally, we also fix a lifetime issue of the row the test revolves
around, further stabilizing CI.
Fixes https://github.com/scylladb/scylladb/issues/20889
Backport: These changes have no semantic effect on the codebase,
but they stabilize CI, so we want to backport them to the maintained
versions of Scylla.
Closesscylladb/scylladb#21632
* github.com:scylladb/scylladb:
test/boost/view_schema_test.cc: Increase TTL in test_view_update_generating_writetime
test/boost/view_schema_test.cc: Wait for views to build in test_view_update_generating_writetime
(cherry picked from commit 733a4f94c7)
Closesscylladb/scylladb#21640
tablet_repair_task_impl keeps a vector of tablet_repair_task_meta,
each of which keeps an effective_replication_map_ptr. So, after
the task completes, the token metadata version will not change for
task_ttl seconds.
Implement tablet_repair_task_impl::release_resources method that clears
tablet_repair_task_meta vector when the task finishes.
Set task_ttl to 1h in test_tablet_repair to check whether the test
won't time out.
Fixes: #21503.
Closesscylladb/scylladb#21504
(cherry picked from commit 572b005774)
Closesscylladb/scylladb#21622
In the current scenario, 'test_replace_with_encryption' only confirms the replacement with inter-dc encryption
for normal nodes. This commit increases the coverage of test by parametrizing the test to confirm behavior
for zero token node replacement as well. This test also implicitly provides
coverage for bootstrap with encryption of zero token nodes.
This PR increases coverage for existing code. Hence we need to backport it. Since only 6.2 version has zero
token node support, hence we only backport it to 6.2
Fixes: scylladb/scylladb#21096Closesscylladb/scylladb#21609
(cherry picked from commit acd643bd75)
Closesscylladb/scylladb#21764
Currently, task_manager_module::abort_all_repairs marks top-level repairs as aborted (but does not abort them) and aborts all existing shard tasks.
A running repair checks whether its id isn't contained in _aborted_pending_repairs and then proceeds to create shard tasks. If abort_all_repairs is executed after _aborted_pending_repairs is checked but before shard tasks are created, then those new tasks won't be aborted. The issue is the most severe for tablet_repair_task_impl that checks the _aborted_pending_repairs content from different shards, that do not see the top-level task. Hence the repair isn't stopped but it creates shard repair tasks on all shards but the one that initialized repair.
Abort top-level tasks in abort_all_repairs. Fix the shard on which the task abort is checked.
Fixes: #21612.
Needs backport to 6.1 and 6.2 as they contain the bug.
Closesscylladb/scylladb#21616
* github.com:scylladb/scylladb:
test: add test to check if repair is properly aborted
repair: add shard param to task_manager_module::is_aborted
repair: use task abort source to abort repair
repair: drop _aborted_pending_repairs and utilize tasks abort mechanism
repair: fix task_manager_module::abort_all_repairs
(cherry picked from commit 5ccbd500e0)
Closesscylladb/scylladb#21642
Alternator's "/localnodes" HTTP requests is supposed to return the list
of nodes in the local DC to which the user can send requests.
Before commit bac7c33313 we used the
gossiper is_alive() method to determine if a node should be returned.
That commit changed the check to is_normal() - because a node can be
alive but in non-normal (e.g., joining) state and not ready for
requests.
However, it turns out that checking is_normal() is not enough, because
if node is stopped abruptly, other nodes will still consider it "normal",
but down (this is so-called "DN" state). So we need to check **both**
is_alive() and is_normal().
This patch also adds a test reproducing this case, where a node is
shut down abruptly. Before this patch, the test failed ("/localnodes"
continued to return the dead node), and after it it passes.
Fixes#21538
Signed-off-by: Nadav Har'El <nyh@scylladb.com>
Closesscylladb/scylladb#21540
(cherry picked from commit 7607f5e33e)
Closesscylladb/scylladb#21634
The test is only sending a subset of the running servers for the rolling
restart. The rolling restart is checking the visibility of the restarted
node agains the other nodes, but if that set is incomplete some of the
running servers might not have seen the restarted node yet.
Improved the manager client rolling restart method to consider all the
running nodes for checking the restarted node visibility.
Fixes: scylladb/scylladb#19959Closesscylladb/scylladb#21477
(cherry picked from commit 92db2eca0b)
Closesscylladb/scylladb#21556
After merged 5a470b2bfb, we found that scylla_raid_setup fails on offline mode
installation.
This is because pkg_install() just print error and exit script on offline mode, instead of installing packages since offline mode not supposed able to connect
internet.
Seems like it occur because of missing "policycoreutils-python-utils"
package, which is the package for "semange" command.
So we need to implement the relabeling patch without using the command.
Fixes https://github.com/scylladb/scylladb/issues/21441
Also, since Amazon Linux 2 has different package name for semange, we need to
adjust package name.
Fixes https://github.com/scylladb/scylladb/issues/21351Closesscylladb/scylladb#21474
* github.com:scylladb/scylladb:
scylla_raid_setup: support installing semanage on Amazon Linux 2
scylla_raid_setup: fix failure on SELinux package installation
(cherry picked from commit 1c212df62d)
Closesscylladb/scylladb#21547
stop() methods, like destructors must always succeed,
and returning errors from them is futile as there is
nothing else we can do with them by continue with shutdown.
stop_ongoing_compactions, in particular, currently returns the status
of stopped compaction tasks from `stop_tasks`, but still all tasks
must be stopped after it, even if they failed, so assert that
and ignore the errors.
Fixes scylladb/scylladb#21159
* Needs backport to 6.2 and 6.1, as commit 8cc99973eb causes handles storage that might cause compaction tasks to fail and eventually terminate on shudown when the exceptions are thrown in noexcept context in the deferred stop destructor body
(cherry picked from commit e942c074f2)
(cherry picked from commit d8500472b3)
(cherry picked from commit c08ba8af68)
(cherry picked from commit a7a55298ea)
(cherry picked from commit 6cce67bec8)
Refs #21299Closesscylladb/scylladb#21434
* github.com:scylladb/scylladb:
compaction_manager: stop: await _stop_future if engaged
compaction_manager: really_do_stop: assert that no tasks are left behind
compaction_manager: stop_tasks, stop_ongoing_compactions: ignore errors
compaction/compaction_manager: stop_tasks(): unlink stopped tasks
compaction/compaction_manager: make _tasks an intrusive list
The current condition that consults the compaction manager
state for awaiting `_stop_future` works since _stop_future
is assigned after the state is set to `stopped`, but it is
incidental. What matters is that `_stop_future` is engaged.
While at it, exchange _stop_future with a ready future
so that stop() can be safely called multiple times.
And dropped the superfluous co_return.
Signed-off-by: Benny Halevy <bhalevy@scylladb.com>
(cherry picked from commit 6cce67bec8)
stop_ongoing_compactions now ignores any errors returned
by tasks, and it should leave no task left behind.
Assert that here, before the compaction_manager is destroyed.
Signed-off-by: Benny Halevy <bhalevy@scylladb.com>
(cherry picked from commit a7a55298ea)
stop() methods, like destructors must always succeed,
and returning errors from them is futile as there is
nothing else we can do with them but continue with shutdown.
Leaked errors on the stop path may cause termination
on shutdown, when called in a deferred action destructor.
Fixesscylladb/scylladb#21298
Signed-off-by: Benny Halevy <bhalevy@scylladb.com>
(cherry picked from commit c08ba8af68)
Stopped tasks currently linger in _tasks until the fiber that created
the task is scheduled again and unlinks the task. This window between
stop and remove prevents reliable checks for empty _tasks list after all
tasks are stopped.
Unlink the task early so really_do_stop() can safely check for an empty
_tasks list (next patch).
(cherry picked from commit d8500472b3)
_tasks is currently std::list<shared_ptr<compaction_task_executor>>, but
it has no role in keeping the instances alive, this is done by the
fibers which create the task (and pin a shared ptr instance).
This lends itself to an intrusive list, avoiding that extra
allocation upon push_back().
Using an intrusive list also makes it simpler and much cheaper (O(1) vs.
O(N)) to remove tasks from the _tasks list. This will be made use of in
the next patch.
Code using _task has to be updated because the value_type changes from
shared_ptr<compaction_task_executor> to compaction_task_executor&.
(cherry picked from commit e942c074f2)
In scylladb/scylladb#19745, view_builder was migrated to group0 and since then it is dependant on group0_service.
Because of this, group0_service should be initialized/destroyed before/after view_builder.
This patch also adds error injection to `raft_server_with_timeouts::read_barrier`, which does 1s sleep before doing the read barrier. There is a new test which reproduces the use after free bug using the error injection.
Fixesscylladb/scylladb#20772scylladb/scylladb#19745 is present in 6.2, so this fix should be backported to it.
Closesscylladb/scylladb#21471
* github.com:scylladb/scylladb:
test/boost/secondary_index_test: add test for use after free
api/raft: use `get_server_with_timeouts().read_barrier()` in coroutines
main,cql_test_env: start group0_service before view_builder
(cherry picked from commit 7021efd6b0)
Closesscylladb/scylladb#21506
For performance reasons, mutation_partition_v2::maybe_drop(), and by extension
also mutation_partition_v2::apply_monotonically(mutation_partition_v2&&)
can evict empty row entries, and hence change the continuity of the merged
entry.
For checking that apply_to_incomplete respects continuity,
test_apply_to_incomplete_respects_continuity obtains the continuity of
the partition entry before and after apply_to_incomplete by calling
e.squashed().get_continuity(). But squashed() uses apply_monotonically(),
so in some circumstances the result of squashed() can have smaller
continuity than the argument of squashed(), which messes with the thing
that the test is trying to check, and causes spurious failures.
This patch changes the method of calculating the continuity set,
so that it matches the entry exactly, fixing the test failures.
Fixesscylladb/scylladb#13757Closesscylladb/scylladb#21459
(cherry picked from commit 35921eb67e)
Closesscylladb/scylladb#21497
Since Scylla is a public repo, when we create a fork, it doesn't fork the team and permissions (unlike private repos where it does).
When we have a backport PR with conflicts, the developers need to be able to update the branch to fix the conflicts. To do so, we modified the logic of the backport automation as follows:
- Every backport PR (with and without conflicts) will be open directly on the `scylladbbot` fork repo
- When there are conflicts, an email will be sent to the original PR author with an invitation to become a contributor in the `scylladbbot` fork with `push` permissions. This will happen only once if Auther is not a contributor.
- Together with sending the invite, all backport labels will be removed and a comment will be added to the original PR with instructions
- The PR author must add the backport labels after the invitation is accepted
Fixes: https://github.com/scylladb/scylladb/issues/18973Closesscylladb/scylladb#21401
(cherry picked from commit 77604b4ac7)
Closesscylladb/scylladb#21466
Adding an auto-backport.py script to handle backport automation instead of Mergify.
The rules of backport are as follows:
* Merged or Closed PRs with any backport/x.y label (one or more) and promoted-to-master label
* Backport PR will be automatically assigned to the original PR author
* In case of conflicts the backport PR will be open in the original autoor fork in draft mode. This will give the PR owner the option to resolve conflicts and push those changes to the PR branch (Today in Scylla when we have conflicts, the developers are forced to open another PR and manually close the backport PR opened by Mergify)
* Fixing cherry-pick the wrong commit SHA. With the new script, we always take the SHA from the stable branch
* Support backport for enterprise releases (from Enterprise branch)
Fixes: https://github.com/scylladb/scylladb/issues/18973
(cherry picked from commit f9e171c7af)
Closesscylladb/scylladb#21469
To fix a race between split and repair here c1de4859d8, a new sstable
generated during streaming can be split before being attached to the sstable
set. That's to prevent an unsplit sstable from reaching the set after the
tablet map is resized.
So we can think this split is an extension of the sstable writer. A failure
during split means the new sstable won't be added. Also, the duration of split
is also adding to the time erm is held. For example, repair writer will only
release its erm once the split sstable is added into the set.
This single-sstable split is going through run_custom_job(), which serializes
with other maintenance tasks. That was a terrible decision, since the split may
have to wait for ongoing maintenance task to finish, which means holding erm
for longer. Additionally, if split monitor decides to run split on the entire
compaction group, it can cause single-sstable split to be aborted since the
former wants to select all sstables, propagating a failure to the streaming
writer.
That results in new sstable being leaked and may cause problems on restart,
since the underlying tablet may have moved elsewhere or multiple splits may
have happened. We have some fragility today in cleaning up leaked sstables on
streaming failure, but this single-sstable split made it worse since the
failure can happen during normal operation, when there's e.g. no I/O error.
It makes sense to kill run_custom_job() usage, since the single-sstable split
is offline and an extension of sstable writing, therefore it makes no sense to
serialize with maintenance tasks. It must also inherit the sched group of the
process writing the new sstable. The inheritance happens today, but is fragile.
Fixes#20626.
Closesscylladb/scylladb#20737
* github.com:scylladb/scylladb:
tablet: Fix single-sstable split when attaching new unsplit sstables
replica: Fix tablet split execute after restart
(cherry picked from commit bca8258150)
Ref scylladb/scylladb#21415
During split prepare phase, there will be more than 1 compaction group with
overlapping token range for a given replica.
Assume tablet 1 has sstable A containing deleted data, and sstable B containing
a tombstone that shadows data in A.
Then split starts:
sstable B is split first, and moved from main (unsplit) group to a
split-ready group
now compaction runs in split-ready group before sstable A is split
tombstone GC logic today only looks at underlying group, so compaction is step
2 will discard the deleted data in A, since it belongs to another group (the
unsplit one), and so the tombstone can be purged incorrectly.
To fix it, compaction will now work with all uncompacting sstables that belong
to the same replica, since tombstone GC requires all sstables that possibly
contain shadowed data to be available for correct decision to be made.
Fixes https://github.com/scylladb/scylladb/issues/20044.
Please replace this line with justification for the backport/* labels added to this PR
Branches 6.0, 6.1 and 6.2 are vulnerable, so backport is needed.
(cherry picked from commit bcd358595f)
(cherry picked from commit 93815e0649)
Refs https://github.com/scylladb/scylladb/pull/20939Closesscylladb/scylladb#21206
* github.com:scylladb/scylladb:
replica: Fix tombstone GC during tablet split preparation
service: Improve error handling for split
During split prepare phase, there will be more than 1 compaction group with
overlapping token range for a given replica.
Assume tablet 1 has sstable A containing deleted data, and sstable B containing
a tombstone that shadows data in A.
Then split starts:
1) sstable B is split first, and moved from main (unsplit) group to a
split-ready group
2) now compaction runs in split-ready group before sstable A is split
tombstone GC logic today only looks at underlying group, so compaction is step
2 will discard the deleted data in A, since it belongs to another group (the
unsplit one), and so the tombstone can be purged incorrectly.
To fix it, compaction will now work with all uncompacting sstables that belong
to the same replica, since tombstone GC requires all sstables that possibly
contain shadowed data to be available for correct decision to be made.
Fixes#20044.
Signed-off-by: Raphael S. Carvalho <raphaelsc@scylladb.com>
(cherry picked from commit 93815e0649)
Retry wasn't really happening since the loop was broken and sleep
part was skipped on error. Also, we were treating abort of split
during shutdown as if it were an actual error and that confused
longevity tests that parse for logs with error level. The fix is
about demoting the level of logs when we know the exception comes
from shutdown.
Fixes#20890.
(cherry picked from commit bcd358595f)
Fix how regular tasks that have a virtual parent are created
in task_manager::module::make_task: set sequence number
of a task and subscribe to module's abort source.
Fixes: #21278.
Needs backport to 6.2
(cherry picked from commit 1eb47b0bbf)
(cherry picked from commit 910a6fc032)
Refs #21280Closesscylladb/scylladb#21332
* github.com:scylladb/scylladb:
tasks: fix sequence number assignment
tasks: fix abort source subscription of virtual task's child
Currently, test_repair_succeeds_with_unitialized_bm checks whether
repair finishes successfully and the error is properly handled
if batchlog_manager isn't initialized. Error handling depends on
logs, making the test fragile to external conditions and flaky.
Drop the error handling check, successful repair is a sufficient
passing condition.
Fixes: #21167.
(cherry picked from commit 85d9565158)
Closesscylladb/scylladb#21330
The skipped ranges should be multiplied by the number of tables
Otherwise the finished ranges ratio will not reach 100%.
Fixes#21174
(cherry picked from commit cffe3dc49f)
(cherry picked from commit 1392a6068d)
(cherry picked from commit 9868ccbac0)
Refs #21252Closesscylladb/scylladb#21313
* github.com:scylladb/scylladb:
test: Add test_node_ops_metrics.py
repair: Make the ranges more consistent in the log
repair: Fix finished ranges metrics for removenode
Despite OSS doesn't limit number of created service levels, match the
enterprise limit to decrease divergence in the test between OSS and
enterprise.
Fixesscylladb/scylladb#21044
(cherry picked from commit 846d94134f)
Closesscylladb/scylladb#21282
Fixes#21159
When an exception is thrown in sstable write etc such that
storage_manager::isolate is initiated, we start a shutdown chain
for message service, gossip etc. These are synced (properly) in
storage_manager::stop, but if we somehow call gossiper::shutdown
outside the normal service::stop cycle, we can end up running the
method simultaneously, intertwined (missing the guard because of
the state change between check and set). We then end up co_awaiting
an invalid future (_failure_detector_loop_done) - a second wait.
Fixed by
a.) Remove superfluous gossiper::shutdown in cql_test_env. This was added
in 20496ed, ages ago. However, it should not be needed nowadays.
b.) Ensure _failure_detector_loop_done is always waitable. Just to be sure.
(cherry picked from commit c28a5173d9)
Closesscylladb/scylladb#21393
When a compaction_group is removed via `compaction_manager::remove`,
it is erase from `_compaction_state`, and therefore compaction
is definitely not enabled on it.
This triggers an internal error if tablets are cleaned up
during drop/truncate, which checks that compaction is disabled
in all compaction groups.
Note that the callers of `compaction_disabled` aren't really
interested in compaction being actively disabled on the
compaction_group, but rather if it's enabled or not.
A follow-up patch can be consider to reverse the logic
and expose `compaction_enabled` rather than `compaction_disabled`.
Fixesscylladb/scylladb#20060
Signed-off-by: Benny Halevy <bhalevy@scylladb.com>
(cherry picked from commit 1c55747637)
Closesscylladb/scylladb#21404
Current code takes a reference and holds it past preemption points. And
while the state itself is not suppose to change the reference may
become stale because the state is re-created on each raft topology
command.
Fix it by taking a copy instead. This is a slow path anyway.
Fixes: scylladb/scylladb#21220
(cherry picked from commit fb38bfa35d)
Closesscylladb/scylladb#21361
In the current scenario, the nodetool status doesn’t display information regarding zero token nodes. For example, if 5 nodes are spun by the administrator, out of which, 2 nodes are zero token nodes, then nodetool status only shows information regarding the 3 non-zero token nodes.
This commit intends to fix this issue by leveraging the “/storage_service/host_id ” API and adding appropriate logic in scylla-nodetool.cc to support zero token nodes.
A test is also added in nodetool/test_status.py to verify this logic. This test fails without this commit’s zero token node support logic, hence verifying the behavior.
This PR fixes a bug. Hence we need to backport it. Backporting needs to be done only
to 6.2 version, since earlier versions don't support zero token nodes.
Fixes: scylladb/scylladb#19849Fixes: scylladb/scylladb#17857
(cherry picked from commit 72f3c95a63)
(cherry picked from commit 39dfd2d7ac)
(cherry picked from commit c00d40b239)
Refs scylladb/scylladb#20909Closesscylladb/scylladb#21334
* github.com:scylladb/scylladb:
fix nodetool status to show zero-token nodes
test: move `wait_for_first_completed` to pylib/util.py
token_metadata: rename endpoint_to_host_id_map getter and add support for joining nodes
In the current scenario, the nodetool status doesn’t display information
regarding zero token nodes. For example, if 5 nodes are spun by the
administrator, out of which, 2 nodes are zero token nodes, then nodetool
status only shows information regarding the 3 non-zero token nodes.
This commit intends to fix this issue by leveraging the “/storage_service/host_id
” API and adding appropriate logic in scylla-nodetool.cc to support zero token nodes.
Robust topology tests are added, which spins up scylla nodes and confirm nodetool
status output for various cases, providing good coverage.
A test is also added in nodetool/test_status.py to verify this logic. These tests fail
without this commit’s zero token node support logic, hence verifying the behavior.
The test `test_status_keyspace_joining_node` has been removed. This test is
based on case where host_id=None, which is impossible. Since we now use
host_id_map for node discovery in nodetool, the nodes with "host_id=None"
go undetected. Since this case is anyway impossible, we can get rid of this.
This PR fixes a bug. Hence we need to backport it. Backporting needs to be done only
to 6.2 version, since earlier versions dont support zero token nodes.
Fixes: scylladb/scylladb#19849
(cherry picked from commit c00d40b239)
Rename host_id map getter, 'get_endpoint_to_host_id_map_for_reading' to 'get_endpoint_to_host_id_map_'
Also modify the getter to return information regarding joining nodes as well.
This getter will later be used for retrieving the nodes in nodetool status, hence it needs to show all nodes,
including joining ones.
The function name suffix `_for_reading` suggests that the function was used
in some other places in the past, and indeed if we need endpoints
"for reading" then we cannot show joining endpoints. But it was confirmed
that this function is currently only used by "/storage_service/host_id" endpoint,
hence it can be modified as required.
Fixes: scylladb/scylladb#17857
(cherry picked from commit 72f3c95a63)
Currently, if a regular task does not have a parent or its parent
is a virtual tasks then it subscribes to module's abort source
in task_manager::task::impl constructor. However, at this point
the kind of the task's parent isn't set. Due to that, children
of virtual tasks aren't aborted on shutdown.
Subscribe to module's abort source in task::impl::set_virtual_parent.
(cherry picked from commit 1eb47b0bbf)
This collector reads nvme temperature sensor, which was observed to
cause bad performance on Azure cloud following the reading of the
sensor for ~6 seconds. During the event, we can see elevated system
time (up to 30%) and softirq time. CPU utilization is high, with
nvm_queue_rq taking several orders of magnitude more time than
normally. There are signs of contention, we can see
__pv_queued_spin_lock_slowpath in the perf profile, called. This
manifests as latency spikes and potentially also throughput drop due
to reduced CPU capacity.
By default, the monitoring stack queries it once every 60s.
(cherry picked from commit 93777fa907)
Closesscylladb/scylladb#21304
Consider the number of tables for the number of ranges logging. Make it
more consistent with the log when the ops starts.
(cherry picked from commit 1392a6068d)
The skipped ranges should be multiplied by the number of tables.
Otherwise the finished ranges ratio will not reach 100%.
Fixes#21174
(cherry picked from commit cffe3dc49f)
The stream-session is the receiving end of streaming, it reads the
mutation fragment stream from an RPC stream and writes it onto the disk.
As such, this part does no disk IO and therefore, using a permit with
count resources is superfluous. Furthermore, after
d98708013c, the count resources on this
permit can cause a deadlock on the receiver end, via the
`db::view::check_view_update_path()`, which wants to read the content of
a system table and therefore has to obtain a permit of its own.
Switch to a tracking-only permit, primarily to resolve the deadlock, but
also because admission is not necessary for a read which does no IO.
Refs: scylladb/scylladb#20885 (partial fix, solves only one of the deadlocks)
Fixes: scylladb/scylladb#21264
(cherry picked from commit dbb26da2aa)
Closesscylladb/scylladb#21303
ALTER tablets-enabled KEYSPACES (KS) may fail due to
group0_concurrent_modification, in which case it's repeated by a for
loop surrounding the code. But because raft's add_entry consumes the
raft's guard (by std::move'ing the guard object), retries of ALTER KS
will use a moved-from guard object, which is UB, potentially a crash.
The fix is to remove the before mentioned for loop altogether and rethrow the exception, as the rf_change event
will be repeated by the topology state machine if it receives the
concurrent modification exception, because the event will remain present
in the global requests queue, hence it's going to be executed as the
very next event.
Note: refactor is implemented in the follow-up commit.
Fixes: https://github.com/scylladb/scylladb/issues/21102
Should be backported to every 6.x branch, as it may lead to a crash.
(cherry picked from commit de511f56ac)
(cherry picked from commit 3f4c8a30e3)
(cherry picked from commit 522bede8ec)
Refs https://github.com/scylladb/scylladb/pull/21121Closesscylladb/scylladb#21256
* github.com:scylladb/scylladb:
test: topology: add disable_schema_agreement_wait utility function
test: add UT to test retrying ALTER tablets KEYSPACE
cql/tablets: fix indentation in `rf_change` event handler
cql/tablets: fix retrying ALTER tablets KEYSPACE
Passing an admitted permit -- i.e. one with count resources on it -- to the multishard reader, will possibly result in a deadlock, because the permit of the multishard reader is destroyed after the permits of its child readers. Therefore its semaphore resources won't be automatically released until children acquire their own resources. This creates a dependency (an edge in the "resource allocation graph"), where the semaphore used by the multishard reader depends on the semaphores used by children. When such dependencies create a cycle, and permits are acquired by different reads in just the right order, a deadlock will happen.
Users of the multishard reader have to be aware of this gotcha -- and of course they aren't. This is small wonder, considering that not even the documentation on the multishard reader mentions this problem. To work around this, the user has to call `reader_permit::release_base_resources()` on the permit, before passing it to the multishard reader. On multiple occasions, developers (including the very author of the multishard reader), forgot or didn't know about this and this resulted in deadlocks down the line. This is a design-flaw of the multishard reader, which is addressed in this PR, after which, it is safe to pass admitted or not admitted permits to the multishard reader, it will handle the call to `release_base_resources()` if needed.
After fixing the problem in the multishard reader, the existing calls to `release_base_resources()` on permits passed to multishard readers are removed. A test is added which reproduces the problem and ensures we don't regress.
Refs: https://github.com/scylladb/scylladb/issues/20885 (partial fix, there is another deadlock in that issue, which this PR doesn't fix)
Fixes: https://github.com/scylladb/scylladb/issues/21263
This fixes (indirectly) a regression introduced by d98708013c so it has to be backported to 6.2
(cherry picked from commit e1d8cddd09)
Refs scylladb/scylladb#21058Closesscylladb/scylladb#21178
* github.com:scylladb/scylladb:
test/boost/mutation_test: add test for multishard permit safety
test/lib/reader_lifecycle_policy: add semaphore factory to constructor
test/lib/reader_lifecycle_policy: rename factory_function
repair/row_level: drop now unneeded release_base_resource() calls
readers/multishard: make multishard reader safe to create with admitted permits
The test_view_build_status_migration_to_v2 test case creates a new view
(vt2) after peforming the view_build_status -> view_build_status_v2
migration and waits until it is built by `wait_for_view_v2` function. It
works by waiting until a SELECT from view_build_status_v2 will return
the expected number of rows for a given view.
However, if the host parameter is unspecified, it will query only one
node on each attempt. Because `view_build_status_v2` is managed via
raft, queries always return data from the queried node only. It might
happen that `wait_for_view_v2` fetches expected results from one node
while a different node might be lagging behind the group0 coordinator
and might not have all data yet.
In case of test_view_build_status_migration_to_v2 this is a problem - it
first uses `wait_for_view_v2` to wait for view, later it queries
`view_build_status_v2` on a random node and asserts its state - and
might fail because that node didn't have the newest state yet.
Fix the issue by issuing `wait_for_view_v2` in parallel for all nodes in
the cluster and waiting until all nodes have the most recent state.
Fixes: scylladb/scylladb#21060
(cherry picked from commit a380a2efd9)
Closesscylladb/scylladb#21129
When there are zero tablets, tablet_metadata::_balancing_enabled
is ignored in the copy.
The property not being preserved can result in balancer not
respecting user's wish to disable balancing when a replica is
created later on.
Fixes#21175.
Signed-off-by: Raphael S. Carvalho <raphaelsc@scylladb.com>
(cherry picked from commit dfc217f99a)
Closesscylladb/scylladb#21190
Add a test checking that the multishard reader will not deadlock, when
created with an admitted permit, on a semaphore with a single count
resource.
(cherry picked from commit e1d8cddd09)
Allowing callers to specify how the semaphore is created and stopped,
instead of doing so via boolean flags like it is done currently. This
method doesn't scale, so use a factory instead.
(cherry picked from commit 5a3fd69374)
To reader_factor_function. We are about to add a new factory function
parameters, so the current factory_function has to be renamed to
something more specific.
(cherry picked from commit c8598e21e8)
Passing an admitted permit -- i.e. one with count resources on it -- to
the multishard reader, will possibly result in a deadlock, because the
permit of the multishard reader is destroyed after the permits of its
child readers. Therefore its semaphore resources won't be automatically
released until children acquire their own resources.
This creates a dependency (an edge in the "resource allocation graph"),
where the semaphore used by the multishard reader depends on the
semaphores used by children. When such dependencies create a cycle, and
permits are acquired by different reads in just the right order, a
deadlock will happen.
Users of the multishard reader have to be aware of this gotcha -- and of
course they aren't. This is small wonder, considering that not even the
documentation on the multishard reader mentions this problem.
To work around this, the user has to call
`reader_permit::release_base_resources()` on the permit, before passing
it to the multishard reader.
On multiple occasions, developers (including the very author of the
multishard reader), forgot or didn't know about this and this resulted
in deadlocks down the line.
This is a design-flaw of the multishard reader, which is addressed in
this patch, after which, it is safe to pass admitted or not admitted
permits to the multishard reader, it will handle the call to
`release_base_resources()` if needed.
(cherry picked from commit 218ea449a5)
On the read path, the compacting reader is applied only to the sstable
reader. This can cause an expired tombstone from an sstable to be purged
from the request before it has a chance to merge with deleted data in
the memtable leading to data resurrection.
Fix this by checking the memtables before deciding to purge tombstones
from the request on the read path. A tombstone will not be purged if a
key exists in any of the table's memtables with a minimum live timestamp
that is lower than the maximum purgeable timestamp.
Fixes#20916
`perf-simple-query` stats before and after this fix :
`build/Dev/scylla perf-simple-query --smp=1 --flush` :
```
// Before this Fix
// ---------------
94941.79 tps ( 71.1 allocs/op, 0.0 logallocs/op, 14.1 tasks/op, 59393 insns/op, 24029 cycles/op, 0 errors)
97551.14 tps ( 71.1 allocs/op, 0.0 logallocs/op, 14.1 tasks/op, 59376 insns/op, 23966 cycles/op, 0 errors)
96599.92 tps ( 71.1 allocs/op, 0.0 logallocs/op, 14.1 tasks/op, 59367 insns/op, 23998 cycles/op, 0 errors)
97774.91 tps ( 71.1 allocs/op, 0.0 logallocs/op, 14.1 tasks/op, 59370 insns/op, 23968 cycles/op, 0 errors)
97796.13 tps ( 71.1 allocs/op, 0.0 logallocs/op, 14.1 tasks/op, 59368 insns/op, 23947 cycles/op, 0 errors)
throughput: mean=96932.78 standard-deviation=1215.71 median=97551.14 median-absolute-deviation=842.13 maximum=97796.13 minimum=94941.79
instructions_per_op: mean=59374.78 standard-deviation=10.78 median=59369.59 median-absolute-deviation=6.36 maximum=59393.12 minimum=59367.02
cpu_cycles_per_op: mean=23981.67 standard-deviation=32.29 median=23967.76 median-absolute-deviation=16.33 maximum=24029.38 minimum=23947.19
// After this Fix
// --------------
95313.53 tps ( 71.1 allocs/op, 0.0 logallocs/op, 14.1 tasks/op, 59392 insns/op, 24058 cycles/op, 0 errors)
97311.48 tps ( 71.1 allocs/op, 0.0 logallocs/op, 14.1 tasks/op, 59375 insns/op, 24005 cycles/op, 0 errors)
98043.10 tps ( 71.1 allocs/op, 0.0 logallocs/op, 14.1 tasks/op, 59381 insns/op, 23941 cycles/op, 0 errors)
96750.31 tps ( 71.1 allocs/op, 0.0 logallocs/op, 14.1 tasks/op, 59396 insns/op, 24025 cycles/op, 0 errors)
93381.21 tps ( 71.1 allocs/op, 0.0 logallocs/op, 14.1 tasks/op, 59390 insns/op, 24097 cycles/op, 0 errors)
throughput: mean=96159.93 standard-deviation=1847.88 median=96750.31 median-absolute-deviation=1151.55 maximum=98043.10 minimum=93381.21
instructions_per_op: mean=59386.60 standard-deviation=8.78 median=59389.55 median-absolute-deviation=6.02 maximum=59396.40 minimum=59374.73
cpu_cycles_per_op: mean=24025.13 standard-deviation=58.39 median=24025.17 median-absolute-deviation=32.67 maximum=24096.66 minimum=23941.22
```
This PR fixes a regression introduced in ce96b472d3 and should be backported to older versions.
Closesscylladb/scylladb#20985
* github.com:scylladb/scylladb:
topology-custom: add test to verify tombstone gc in read path
replica/table: check memtable before discarding tombstone during read
compaction_group: track maximum timestamp across all sstables
(cherry picked from commit 519e167611)
Backported from #20985 to 6.2.
Signed-off-by: Lakshmi Narayanan Sreethar <lakshmi.sreethar@scylladb.com>
Closesscylladb/scylladb#21251
The newly added testcase is based on the already existing
`test_alter_dropped_tablets_keyspace`.
A new error injection is created, which stops the ALTER execution just
before the changes are submitted to RAFT. In the meantime, a new schema
change is performed using the 2nd node in the cluster, thus causing the
1st node to retry the ALTER statement.
(cherry picked from commit 522bede8ec)
ALTER tablets-enabled KEYSPACES (KS) may fail due to
`group0_concurrent_modification`, in which case it's repeated by a `for`
loop surrounding the code. But because raft's `add_entry` consumes the
raft's guard (by `std::move`'ing the guard object), retries of ALTER KS
will use a moved-from guard object, which is UB, potentially a crash.
The fix is to remove the before mentioned `for` loop altogether and rethrow the exception, as the `rf_change` event
will be repeated by the topology state machine if it receives the
concurrent modification exception, because the event will remain present
in the global requests queue, hence it's going to be executed as the
very next event.
`topology_coordinator::handle_topology_coordinator_error` handling the
case of `group0_concurrent_modification` has been extended with logging
in order not to write catch-log-throw boilerplate.
Note: refactor is implemented in the follow-up commit.
Fixes: scylladb/scylladb#21102
(cherry picked from commit de511f56ac)
Having tablet metadata with more than 1 pending replica will prevent this metadata from being (re)loaded due to sanity check on load. This patch fails the operation which tries to save the wrong metadata with a similar sanity check. For that, changes submitted to raft are validated, and if it's topology_change that affects system.tablets, the new "replicas" and "new_replicas" values are checked similarly to how they will be on (re)load.
Fixes#20043
(cherry picked from commit f09fe4f351)
(cherry picked from commit e5bf376cbc)
(cherry picked from commit 1863ccd900)
Refs #21020Closesscylladb/scylladb#21111
* github.com:scylladb/scylladb:
tablets: Validate system.tablets update
group0_client: Introduce change validation
group0_client: Add shared_token_metadata dependency
Implement change validation for raft topology_change command. For now
the only check is that the "pending replicas" contains at most one
entry. The check mirrors similar one in `process_one_row` function.
If not passed, this prevents system.tablets from being updated with the
mutation(s) that will not be loaded later.
Signed-off-by: Pavel Emelyanov <xemul@scylladb.com>
Add validate_change() methods (well, a template and an overload) that
are called by prepare_command() and are supposed to validate the
proposed change before it hits persistent storage
Signed-off-by: Pavel Emelyanov <xemul@scylladb.com>
It will be needed later to get tablet_metadata from.
The dependency is "OK", shared_token_metadata is low-level sharded
service. Client already references db::system_keyspace, which in turn
references replica::database which, finally, references token_metadata
Signed-off-by: Pavel Emelyanov <xemul@scylladb.com>
On RHEL9, systemd-coredump fails to coredump on /var/lib/scylla/coredump because the service only have write acess with systemd_coredump_var_lib_t. To make it writable, we need to add file context rule for /var/lib/scylla/coredump, and run restorecon on /var/lib/scylla.
Fixes#19325
(cherry picked from commit 56c971373c)
(cherry picked from commit 0ac450de05)
Refs #20528Closesscylladb/scylladb#21211
* github.com:scylladb/scylladb:
scylla_raid_setup: configure SELinux file context
scylla_coredump_setup: fix SELinux configuration for RHEL9
On RHEL9, systemd-coredump fails to coredump on /var/lib/scylla/coredump
because the service only have write acess with systemd_coredump_var_lib_t.
To make it writable, we need to add file context rule for
/var/lib/scylla/coredump, and run restorecon on /var/lib/scylla.
Fixes#20573
(cherry picked from commit 0ac450de05)
Seems like specific version of systemd pacakge on RHEL9 has a bug on
SELinux configuration, it introduced "systemd-container-coredump" module
to provide rule for systemd-coredump, but not enabled by default.
We have to manually load it, otherwise it causes permission error.
Fixes#19325
(cherry picked from commit 56c971373c)
deselect remove_data_dir_of_dead_node event from test_random_failures
due to ussue #20751
(cherry picked from commit 9b0e15678e)
Closesscylladb/scylladb#21138
The testcase is flaky due to a known python driver issue:
https://github.com/scylladb/python-driver/issues/317.
This issue causes the `CREATE KEYSPACE` statement to be sometimes
executed twice in a row, and the 2nd CREATE statement causes the test to
fail.
In order to work around it, it's enough to add `if not exists` when
creating a ks.
Fixes: #21034
Needs to be backported to all 6.x branches, as the PR introducing this flakiness is backported to every 6.x branch.
(cherry picked from commit f8475915fb)
Closesscylladb/scylladb#21107
The SCYLLA-VERSION-GEN file skips updating the SCYLLA-*-FILE files if
the commit hash from SCYLLA-RELEASE-FILE is the same. The original
reason for this was to prevent the date in the version string from
changing if multiple modes are built across midnight
(scylladb/scylla-pkg#826). However - intentionally or not - it serves
another purpose: it prevents an infinite loop in the build process.
If the build.ninja file needs to be rebuilt, the configure.py script
unconditionally calls ./SCYLLA-VERSION-GEN. On the other hand, if one
of the SCYLLA-*-FILE files is updated then this triggers rebuild
of build.ninja. Apparently, this is sufficient for ninja to enter an
infinite loop.
However, the check assumes that the RELEASE is in the format
<build identifier>.<date>.<commit hash>
and assumes that none of the components have a dot inside - otherwise it
breaks and just works incorrectly. Specifically, when building a private
version, it is recommended to set the build identifier to
`count.yourname`.
Previously, before 85219e9, this problem wasn't noticed most likely
because reconfigure process was broken and stopped overwriting
the build.ninja file after the first iteration.
Fix the problem by fixing the logic that extracts the commit hash -
instead of looking at the third dot-separated field counting from the
left side, look at the last field.
Fixes: scylladb/scylladb#21027
(cherry picked from commit 64ca58125e)
Closesscylladb/scylladb#21103
This is a manual backport of #20788
When tablets are migrated with file-based streaming, we can have a situation where a tombstone is garbage collected before the data it shadows lands. For instance, if we have a tablet replica with 3 sstables:
1. sstable containing an expired tombstone
2. sstable with additional data
3. sstable containing data which is shadowed by the expired tombstone in sstable 1
If this tablet is migrated, and the sstables are streamed in the order listed above, the first two sstables can be compacted before the third sstable arrives. In that case, the expired tombstone will be garbage collected, and data in the third sstable will be resurrected after it arrives to the pending replica.
This change fixes this problem by disabling tombstone garbage collection for pending replicas.
This fixes a problem in Enterprise, but the change is in OSS in order to have as few differences between OSS and Enterprise and to have a common infrastructure for disabling tombstone GC on pending replicas.
Fixes#21090Closesscylladb/scylladb#21061
* github.com:scylladb/scylladb:
test: test tombstone GC disabled on pending replica
tablet_storage_group_manager: update tombstone_gc_enabled in compaction group
database::table: add tombstone_gc_enabled(locator::tablet_id)
seastar extracted `addr2line` python module out back in
e078d7877273e4a6698071dc10902945f175e8bc. but `install.sh` was
not updated accordingly. it still installs `seastar-addr2line`
without installing its new dependency. this leaves us with a
broken `seastar-addr2line` in the relocatable tarball.
```console
$ /opt/scylladb/scripts/seastar-addr2line
Traceback (most recent call last):
File "/opt/scylladb/scripts/libexec/seastar-addr2line", line 26, in <module>
from addr2line import BacktraceResolver
ModuleNotFoundError: No module named 'addr2line'
```
in this change, we redistribute `addr2line.py` as well. this
should address the issue above.
Fixesscylladb/scylladb#21077
Signed-off-by: Kefu Chai <kefu.chai@scylladb.com>
(cherry picked from commit da433aad9d)
Closesscylladb/scylladb#21085
During the investigation of scylladb/scylladb#20282, it was discovered that implementations of speculating read executors have undefined behavior when called with an incorrect number of read replicas. This PR introduces two levels of condition checking:
- Condition checking in speculating read executors for the number of replicas.
- Checking the consistency of the Effective Replication Map in filter_for_query(): the map is considered incorrect if the list of replicas contains a node from a data center whose replication factor is 0.
Please note: This PR does not fix the issue found in scylladb/scylladb#20282; it only adds condition checks to prevent undefined behavior in cases of inconsistent inputs.
Refs scylladb/scylladb#20625
As this issue applies to the releases versions and can affect clients, we need backports to 6.0, 6.1, 6.2.
(cherry picked from commit 132358dc92)
(cherry picked from commit ae23d42889)
(cherry picked from commit ad93cf5753)
(cherry picked from commit 8db6d6bd57)
(cherry picked from commit c373edab2d)
Refs #20851Closesscylladb/scylladb#21067
* github.com:scylladb/scylladb:
Add conditions checking for get_read_executor
Avoid an extra call to block_for in db::filter_for_query.
Improve code readability in consistency_level.cc and storage_proxy.cc
tools: Add build_info header with functions providing build type information
tests: Add tests for alter table with RF=1 to RF=0
Until we automatically support rebuild for tablets-enabled
keyspaces, warn the user about them.
The reason this is not an error, is that after
increasing RF in a new datacenter, the current procedure
is to run `nodetool rebuild` on all nodes in that dc
to rebuild the new vnode replicas.
This is not required for tablets, since the additional
replicas are rebuilt automatically as part of ALTER KS.
However, `nodetool rebuild` is also run after local
data loss (e.g. due to corruption and removal of sstables).
In this case, rebuild is not supported for tablets-enabled
keyspaces, as tablet replicas that had lost data may have
already been migrated to other nodes, and rebuilding the
requested node will not know about it.
It is advised to repair all nodes in the datacenter instead.
Refs scylladb/scylladb#17575
Signed-off-by: Benny Halevy <bhalevy@scylladb.com>
(cherry picked from commit ed1e9a1543)
Closesscylladb/scylladb#20722
can_admit_read() returns reason::memory_resources when the permit is queued due
to lack of count resources, and it returns reason::count_resources when the
permit is queued due to lack of memory resources. It's supposed to be the other
way around.
This bug is causing the two counts to be swapped in the stat dumps printed to
the logs when semaphores time out.
(cherry picked from commit 6cf3747c5f)
Closesscylladb/scylladb#21030
During the investigation of scylladb/scylladb#20282, it was discovered that
implementations of speculating read executors have undefined behavior
when called with an incorrect number of read replicas. This PR
introduces two levels of condition checking:
- Condition checking in speculating read executors for the number of replicas.
- Checking the consistency of the Effective Replication Map in
get_endpoints_for_reading(): the map is considered incorrect the number of
read replica nodes is higher than replication factor. The check is
applied only when built in non release mode.
Please note: This PR does not fix the issue found in scylladb/scylladb#20282;
it only adds condition checks to prevent undefined behavior in cases of
inconsistent inputs.
Refs scylladb/scylladb#20625
(cherry picked from commit c373edab2d)
A new header provides `constexpr` functions to retrieve build
type information: `get_build_type()`, `is_release_build()`,
and `is_debug_build()`. These functions are useful when adding
changes that should be enabled at compile time only for
specific build types.
(cherry picked from commit ae23d42889)
Adding Vnodes and Tablets tests for alter keyspace operation that decreases replication factor
from 1 to 0 for one of two data centers. Tablet version fails due to issue described in
scylladb/scylladb#20625.
Test for scylladb/scylladb#20625
(cherry picked from commit 132358dc92)
In order to avoid cases during tablet migrations where we garbage
collect tombstones before the data it shadows arrives, we will
disable tombstone GC on pending replicas.
To achieve this we added a tombston_gc_enabled flag to compaction_group.
This flag is updated from updte_effective_repliction_map method of the
tablet_storage_group_manager class.
It was not possible to link to configuration parameters groups in docs/reference/configuration-parameters.rst if they contained a space.
(cherry picked from commit 2247bdbc8c)
Closesscylladb/scylladb#21037
This change adds the flag tombstone_gc_enabled to compaction_group.
The value of this flag will be set in
tablet_storage_group_manager::update_effective_replication_map().
ALTERing tablets-enabled KEYSPACES (KS) didn't account for materialized
views (MV), and only produced tablets mutations changing tables.
With this patch we're producing tablets mutations for both tables and
MVs, hence when e.g. we change the replication factor (RF) of a KS, both the
tables' RFs and MVs' RFs are updated along with tablets replicas.
The `test_tablet_rf_change` testcase has been extended to also verify
that MVs' tablets replicas are updated when RF changes.
Fixes: #20240
(cherry picked from commit e0c1a51642)
Closesscylladb/scylladb#21022
This patch series fixes a couple of bugs around validating if RF is not changed by too much when performing ALTER tablets KS.
RF cannot change by more than 1 in total, because tablets load balancer cannot handle more work at once.
Fixes: #20039
Should be backported to 6.0 & 6.1 (wherever tablets feature is present), as this bug may break the cluster.
(cherry picked from commit 042825247f)
(cherry picked from commit adf453af3f)
(cherry picked from commit 9c5950533f)
(cherry picked from commit 47acdc1f98)
(cherry picked from commit 93d61d7031)
(cherry picked from commit 6676e47371)
(cherry picked from commit 2aabe7f09c)
(cherry picked from commit ee56bbfe61)
Refs #20208Closesscylladb/scylladb#21009
* github.com:scylladb/scylladb:
cql: sum of abs RFs diffs cannot exceed 1 in ALTER tablets KS
cql: join new and old KS options in ALTER tablets KS
cql: fix validation of ALTERing RFs in tablets KS
cql: harden `alter_keyspace_statement.cc::validate_rf_difference`
cql: validate RF change for new DCs in ALTER tablets KS
cql: extend test_alter_tablet_keyspace_rf
cql: refactor test_tablets::test_alter_tablet_keyspace
cql: remove unused helper function from test_tablets
- As part of deprecation of IP address usage, warning messages were added when IP addresses specified in the `ignore-dead-nodes` and `--ignore-dead-nodes-for-replace` options for scylla and nodetool.
- Slight optimizations for `utils::split_comma_separated_list`, ` host_id_or_endpoint lists` and `storage_service` remove node operations, replacing `std::list` usage with `std::vector`.
Fixes scylladb/scylladb#19218
Backport: 6.2 as it's not yet released.
(cherry picked from commit 3b9033423d)
(cherry picked from commit a871321ecf)
(cherry picked from commit 9c692438e9)
(cherry picked from commit 6398b7548c)
Refs #20756Closesscylladb/scylladb#20958
* github.com:scylladb/scylladb:
config: Add a warning about use of IP address for join topology and replace operations.
nodetool: Add IP address usage warning for 'ignore-dead-nodes'.
tests: Fix incorrect UUIDs in test_nodeops
utils: Optimizations for utils::split_comma_separated_list and usage of host_id_or_endpoint lists
This timeout was added to catch reader related deadlocks. We have not
seen such deadlocks for a long time, but we did see false-timeouts
caused by this, see explanation below. Since the cost now outweight the
benefit, remove the timeout altogether.
The false timeout happens during mixed-shard repair. The
`reader_permit::set_timeout()` call is called on the top-level permit
which repair has a handle on. In the case of the mixed-shard repair,
this belongs to the multishard reader. Calling set_timeout() on the
multishard reader has no effect on the actual shard readers, except in
one case: when the shard reader is created, it inherits the multishard
reader's current timeout. As the shard reader can be alive for a long
time, this timeout is not refreshed and ultimately causes a timeout and
fails the repair.
Refs: #18269
(cherry picked from commit 3ebb124eb2)
Closesscylladb/scylladb#20955
During migration cleanup, there's a small window in which the storage
group was stopped but not yet removed from the list. So concurrent
operations traversing the list could work with stopped groups.
During a test which emitted schema changes during migrations,
a failure happened when updating the compaction strategy of a table,
but since the group was stopped, the compaction manager was unable
to find the state for that group.
In order to fix it, we'll skip stopped groups when traversing the
list since they're unused at this stage of migration and going away
soon.
Fixes#20699.
Signed-off-by: Raphael S. Carvalho <raphaelsc@scylladb.com>
(cherry picked from commit cf58674029)
Closesscylladb/scylladb#20899
Refs #20686
Refs #15607
In #15060 we added forced new commitlog segment on user initated flush,
mainly so that tests can verify tombstone gc and other compaction related
things, without having to wait for "organic" segment deletion.
Schema commitlog was not included, mainly because we did not have tests
featuring compaction checks of schema related tables, but also because
it was assumed to be lower general througput.
There is however no real reason to not include it, and it will make some
testing much quicker and more predictable.
(cherry picked from commit 60f8a9f39d)
Closesscylladb/scylladb#20705
storage_proxy::cancellable_write_handlers_list::update_live_iterators
assumes that iterators in _live_iterators can be dereferenced, but
the code does not make any attempt to make sure this is the case. The
iterator can be the end iterator which cannot be dereferenced.
The patch makes sure that there is no end iterator in _live_iterators.
Fixesscylladb/scylladb#20874
(cherry picked from commit da084d6441)
Closesscylladb/scylladb#21003
in a3db5401, we introduced the TLS certi authenticator, which is
configured using `auth_certificate_role_queries` option . the
value of this option contains a regular expression. so there are
chances the regular expression is malformatted. in that case,
when converting its value presenting the regular expression to an
instance of `boost::regex`, Boost.Regex throws a `boost::regex_error`
exception, not `std::regex_error`.
since we decided to use Boost.Regex, let's catch `boost::regex_error`.
Refs a3db5401Fixesscylladb/scylladb#20941
Signed-off-by: Kefu Chai <kefu.chai@scylladb.com>
(cherry picked from commit 439c52c7c5)
Closesscylladb/scylladb#20952
Commit aa1270a00c changed most uses
of `assert` in the codebase to `SCYLLA_ASSERT`.
But the comment fixed in this patch is talking specifically about
`assert`, and shouldn't have been changed. It doesn't make sense
after the change.
(cherry picked from commit da7edc3a08)
Closesscylladb/scylladb#20976
Group0 server is often used in asynchronous context, but we do not wait
for them to complete before destroying the server. We already have
shutdown gate for it, so lets use it in those asynch functions.
Also make sure to signal group0 abort source if initialization fails.
Fixes scylladb/scylladb#20701
Backport to 6.2 since it contains af83c5e53e and it made the race easier to hit, so tests became flaky.
(cherry picked from commit ba22493a69)
(cherry picked from commit e642f0a86d)
Refs #20891Closesscylladb/scylladb#21008
* github.com:scylladb/scylladb:
group: hold group0 shutdown gate during async operations
group0: Stop group0 if node initialization fails
Tablets load balancer is unable to process more than a single pending
replica, thus ALTER tablets KS cannot accept an ALTER statement which
would result in creating 2+ pending replicas, hence it has to validate
if the sum of absoulte differences of RFs specified in the statement is
not greter than 1.
(cherry picked from commit ee56bbfe61)
A bug has been discovered while trying to ALTER tablets KS and
specifying only 1 out of 2 DCs - the not specified DC's RF has been
zeroed. This is because ALTER tablets KS updated the KS only with the
RF-per-DC mapping specified in the ALTER tablets KS statement, so if a
DC was ommitted, it was assigned a value of RF=0.
This commit fixes that plus additionally passes all the KS options, not
only the replication options, to the topology coordinator, where the KS
update is performed.
`initial_tablets` is a special case, which requires a special handling
in the source code, as we cannot simply update old initial_tablet's
settings with the new ones, because if only ` and TABLETS = {'enabled':
true}` is specified in the ALTER tablets KS statement, we should not zero the `initial_tablets`, but
rather keep the old value - this is tested by the
`test_alter_preserves_tablets_if_initial_tablets_skipped` testcase.
Other than that, the above mentioned testcase started to fail with
these changes, and it appeared to be an issue with the test not waiting
until ALTER is completed, and thus reading the old value, hence the
test's body has been modified to wait for ALTER to complete before
performing validation.
(cherry picked from commit 2aabe7f09c)
The validation has been corrected with:
1. Checking if a DC specified in ALTER exists.
2. Removing `REPLICATION_STRATEGY_CLASS_KEY` key from a map of RFs that
needs their RFs to be validated.
(cherry picked from commit 6676e47371)
This function assumed that strings passed as arguments will be of
integer types, but that wasn't the case, and we missed that because this
function didn't have any validation, so this change adds proper
validation and error logging.
Arguments passed to this function were forwarded from a call to
`ks_prop_defs::get_replication_options`, which, among rf-per-dc mapping, returns also
`class:replication_strategy` pair. Second pair's member has been casted
into an `int` type and somehow the code was still running fine, but only
extra testing added later discovered a bug in here.
(cherry picked from commit 93d61d7031)
Wait for all outstanding async work that uses group0 to complete before
destroying group0 server.
Fixesscylladb/scylladb#20701
(cherry picked from commit e642f0a86d)
ALTER tablets KS validated if RF is not changed by more than 1 for DCs
that already had replicas, but not for DCs that didn't have them yet, so
specifying an RF jump from 0 to 2 was possible when listing a new DC in
ALTER tablets KS statement, which violated internal invariants of
tablets load balancer.
This PR fixes that bug and adds a multi-dc testcases to check if adding
replicas to a new DC and removing replicas from a DC is honoring the RF
change constraints.
Refs: #20039
(cherry picked from commit 47acdc1f98)
Commit af83c5e53e moved aborting of group0 into the storage service
drain function. But it is not called if node fails during initialization
(if it failed to join cluster for instance). So lets abort on both
paths (but only once).
(cherry picked from commit ba22493a69)
1. Renamed the testcase to emphasize that it only focuses on testing
changing RF - there are other tests that test ALTER tablets KS
in general.
2. Fixed whitespaces according to PEP8
(cherry picked from commit adf453af3f)
`change_default_rf` is not used anywhere, moreover it uses
`replication_factor` tag, which is forbidden in ALTER tablets KS
statement.
(cherry picked from commit 042825247f)
operations.
When the '--ignore-dead-nodes-for-replace' config option contains
IP addresses, a warning will be logged, notifying the user that
using IP addresses with this option is deprecated and will no
longer be supported in the next release.
Fixesscylladb/scylladb#19218
(cherry picked from commit 6398b7548c)
Since we are deprecating the use of IP addresses, a warning message will be printed
if 'nodetool removenode --ignore-dead-nodes' is used with IP addresses.
(cherry picked from commit 9c692438e9)
It was found that the UUIDs used in test_nodeops were
invalid. This update replaces those UUIDs with newly generated
random UUIDs.
(cherry picked from commit a871321ecf)
- utils::split_comma_separated_list now accepts a reference to sstring instead
of a copy to avoid extra memory allocations. Additionally, the results of
trimming are moved to the resulting vector instead of being copied.
- service/storage_service removenode, raft_removenode, find_raft_nodes_from_hoeps,
parse_node_list and api/storage_service::set_storage_service were changed to use
std::vector<host_id_or_endpoint> instead of std::list<host_id_or_endpoint> as
std::vector is a more cache-friendly structure, resulting in better performance.
(cherry picked from commit 3b9033423d)
There are two bits that control whenter replication strategy for a
keyspace will use tablets or not -- the configuration option and CQL
parameter. This patch tunes its parsing to implement the logic shown
below:
if (strategy.supports_tablets) {
if (cql.with_tablets) {
if (cfg.enable_tablets) {
return create_keyspace_with_tablets();
} else {
throw "tablets are not enabled";
}
} else if (cql.with_tablets = off) {
return create_keyspace_without_tablets();
} else { // cql.with_tablets is not specified
if (cfg.enable_tablets) {
return create_keyspace_with_tablets();
} else {
return create_keyspace_without_tablets();
}
}
} else { // strategy doesn't support tablets
if (cql.with_tablets == on) {
throw "invalid cql parameter";
} else if (cql.with_tablets == off) {
return create_keyspace_without_tablets();
} else { // cql.with_tablets is not specified
return create_keyspace_without_tablets();
}
}
closes: #20088
In order to enable tablets "by default" for NetworkTopologyStrategy
there's explicit check near ks_prop_defs::get_initial_tablets(), that's
not very nice. It needs more care to fix it, e.g. provide feature
service reference to abstract_replication_strategy constructor. But
since ks_prop_defs code already highjacks options specifically for that
strategy type (see prepare_options() helper), it's OK for now.
There's also #20768 misbehavior that's preserved in this patch, but
should be fixed eventually as well.
Signed-off-by: Pavel Emelyanov <xemul@scylladb.com>
(cherry picked from commit ebedc57300)
Closesscylladb/scylladb#20927
Fixes#20862
With the change in 60af2f3cb2 the bookkeep
for buffer memory was changed subtly, the problem here that we would
shrink buffer size before we after flush use said buffer's size to
decrement the buffer_list_bytes value, previously inc:ed by the full,
allocated size. I.e. we would slowly grow this value instead of adjusting
properly to actual used bytes.
Test included.
(cherry picked from commit ee5e71172f)
Closesscylladb/scylladb#20902
Currently, node ops virtual task gathers its children from all nodes contained
in a sum of service::topology::normal_nodes and service::topology::transition_nodes.
The maps may contain nodes that are down but weren't removed yet. So, if a user
requests the status of a node ops virtual task, the task's attempt to retrieve
its children list may fail with seastar::rpc::closed_error.
Filter out the tasks that are down in node_ops::task_manager_module::get_nodes.
Fixes: #20843.
(cherry picked from commit a558abeba3)
Closesscylladb/scylladb#20898
This fixes a use-after-free bug when parsing clustering key across
pages.
Also includes a fix for allocating section retry, which is potentially not safe (not in practice yet).
Details of the first problem:
Clustering key index lookup is based on the index file page cache. We
do a binary search within the index, which involves parsing index
blocks touched by the algorithm. Index file pages are 4 KB chunks
which are stored in LSA.
To parse the first key of the block, we reuse clustering_parser, which
is also used when parsing the data file. The parser is stateful and
accepts consecutive chunks as temporary_buffers. The parser is
supposed to keep its state across chunks.
In 93482439, the promoted index cursor was optimized to avoid
fully page copy when parsing index blocks. Instead, parser is
given a temporary_buffer which is a view on the page.
A bit earlier, in b1b5bda, the parser was changed to keep shared
fragments of the buffer passed to the parser in its internal state (across pages)
rather than copy the fragments into a new buffer. This is problematic
when buffers come from page cache because LSA buffers may be moved
around or evicted. So the temporary_buffer which is a view on the LSA
buffer is valid only around the duration of a single consume() call to
the parser.
If the blob which is parsed (e.g. variable-length clustering key
component) spans pages, the fragments stored in the parser may be
invalidated before the component is fully parsed. As a result, the
parsed clustering key may have incorrect component values. This never
causes parsing errors because the "length" field is always parsed from
the current buffer, which is valid, and component parsing will end at
the right place in the next (valid) buffer.
The problematic path for clustering_key parsing is the one which calls
primitive_consumer::read_bytes(), which is called for example for text
components. Fixed-size components are not parsed like this, they store
the intermediate state by copying data.
This may cause incorrect clustering keys to be parsed when doing
binary search in the index, diverting the search to an incorrect
block.
Details of the solution:
We adapt page_view to a temporary_buffer-like API. For this, a new concept
is introduced called ContiguousSharedBuffer. We also change parsers so that
they can be templated on the type of the buffer they work with (page_view vs
temporary_buffer). This way we don't introduce indirection to existing algorithms.
We use page_view instead of temporary_buffer in the promoted
index parser which works with page cache buffers. page_view can be safely
shared via share() and stored across allocating sections. It keeps hold to the
LSA buffer even across allocating sections by the means of cached_file::page_ptr.
Fixes#20766
(cherry picked from commit 8aca93b3ec)
(cherry picked from commit ac823b1050)
(cherry picked from commit 93bfaf4282)
(cherry picked from commit c0fa49bab5)
(cherry picked from commit 29498a97ae)
(cherry picked from commit c15145b71d)
(cherry picked from commit 7670ee701a)
(cherry picked from commit c09fa0cb98)
(cherry picked from commit 0279ac5faa)
(cherry picked from commit 8e54ecd38e)
(cherry picked from commit b5ae7da9d2)
Refs #20837Closesscylladb/scylladb#20905
* github.com:scylladb/scylladb:
sstables: bsearch_clustered_cursor: Add trace-level logging
sstables: bsearch_clustered_cursor: Move definitions out of line
test, sstables: Verify parsing stability when allocating section is retried
test, sstables: Verify parsing stability when buffers cross page boundary
sstables: bsearch_clustered_cursor: Switch parsers to work with page_view
cached_file: Adapt page_view to ContiguousSharedBuffer
cached_file: Change meaning of page_view::_size to be relative to _offset rather than page start
sstables, utils: Allow parsers to work with different buffer types
sstables: promoted_index_block_parser: Make reset() always bring parser to initial state
sstables: bsearch_clustered_cursor: Switch read_block_offset() to use the read() method
sstables: bsearch_clustered_cursor: Fix parsing when allocating section is retried
In order to later use the formatter for the inner class
promoted_index_block, which is defined out of line after
cached_promoted_index class definition.
(cherry picked from commit 8e54ecd38e)
This fixes a use-after-free bug when parsing clustering key across
pages.
Clustering key index lookup is based on the index file page cache. We
do a binary search within the index, which involves parsing index
blocks touched by the algorithm. Index file pages are 4 KB chunks
which are stored in LSA.
To parse the first key of the block, we reuse clustering_parser, which
is also used when parsing the data file. The parser is stateful and
accepts consecutive chunks as temporary_buffers. The parser is
supposed to keep its state across chunks.
In b1b5bda, the parser was changed to keep shared fragments of the
buffer passed to the parser in its internal state (across pages)
rather than copy the fragments into a new buffer. This is problematic
when buffers come from page cache because LSA buffers may be moved
around or evicted. So the temporary_buffer which is a view on the LSA
buffer is valid only around the duration of a single consume() call to
the parser.
If the blob which is parsed (e.g. variable-length clustering key
component) spans pages, the fragments stored in the parser may be
invalidated before the component is fully parsed. As a result, the
parsed clustering key may have incorrect component values. This never
causes parsing errors because the "length" field is always parsed from
the current buffer, which is valid, and component parsing will end at
the right place in the next (valid) buffer.
The problematic path for clustering_key parsing is the one which calls
primitive_consumer::read_bytes(), which is called for example for text
components. Fixed-size components are not parsed like this, they store
the intermediate state by copying data.
This may cause incorrect clustering keys to be parsed when doing
binary search in the index, diverting the search to an incorrect
block.
The solution is to use page_view instead of temporary_buffer, which
can be safely shared via share() and stored across allocating
section. The page_view maintains its hold to the LSA buffer even
across allocating sections.
Fixes#20766
(cherry picked from commit 7670ee701a)
Currently, parsers work with temporary_buffer<char>. This is unsafe
when invoked by bsearch_clustered_cursor, which reuses some of the
parsers, and passes temporary_buffer<char> which is a view onto LSA
buffer which comes from the index file page cache. This view is stable
only around consume(). If parsing requires more than one page, it will
continue with a different input buffer. The old buffer will be
invalid, and it's unsafe for the parser to store and access
it. Unfortunetly, the temporary_buffer API allows sharing the buffer
via the share() method, which shares the underlying memory area. This
is not correct when the underlying is managed by LSA, because storage
may move. Parser uses this sharing when parsing blobs, e.g. clustering
key components. When parsing resumes in the next page, parser will try
to access the stored shared buffers pointing to the previous page,
which may result in use-after-free on the memory area.
In prearation for fixing the problem, parametrize parsers to work with
different kinds of buffers. This will allow us to instantiate them
with a buffer kind which supports sharing of LSA buffers properly in a
safe way.
It's not purely mechanical work. Some parts of the parsing state
machine still works with temporary_buffer<char>, and allocate buffers
internally, when reading into linearized destination buffer. They used
to store this destination in _read_bytes vector, same field which is
used to store the shared buffers. Now it's not possible, since shared
buffer type may be different than temporary_buffer<char>. So those
paths were changed to use a new field: _read_bytes_buf.
(cherry picked from commit c0fa49bab5)
When reset() is done due to allocating section retry, it can be
theoretically in an arbitrary point. So we should not assume that it
finished parsing and state was reset by previous parsing. We should
reset all the fields.
(cherry picked from commit 93bfaf4282)
Parser's state was not reset when allocating section was retried.
This doesn't cause problems in practice, because reserves are enough
to cover allocation demands of parsing clustering keys, which are at
most 64K in size. But it's still potentially unsafe and needs fixing.
(cherry picked from commit 8aca93b3ec)
For each new node added to the raft config populate it's ID to IP mapping in raft address map from the gossiper. The mapping may have expired if a node is added to the raft configuration long after it first appears in the gossiper.
Fixes scylladb/scylladb#20600
Backport to all supported versions since the bug may cause bootstrapping failure.
(cherry picked from commit bddaf498df)
(cherry picked from commit 9e4cd32096)
Refs #20601Closesscylladb/scylladb#20847
* github.com:scylladb/scylladb:
test: extend existing test to check that a joining node can map addresses of all pre-existing nodes during join
group0: make sure that address map has an entry for each new node in the raft configuration
ID->IP mapping is added to the raft address map when the mapping first
appears in the gossiper, but it is added as expiring entry. It becomes
non expiring when a node is added to raft configuration. But when a node
joins those two events may be distant in time (since the node's request
may sit in the topology coordinator queue for a while) and mappings may
expire already from the map. This patch makes sure to transfer the
mapping from the gossiper for a node that is added to the raft
configuration instead of assuming that the mapping is already there.
(cherry picked from commit bddaf498df)
Before 17f4a151ce the node was marked as
been replaced in join_group0 state, before it actually joins the group0,
so by the time it actually joins and starts transferring snapshot/log no
traffic is sent to it. The commit changed this to mark the node as
being replaced after the snapshot/log is already transferred so we can
get the traffic to the node while it sill did not caught up with a
leader and this may causes problems since the state is not complete.
Mark the node as being replaced earlier, but still add the new node to
the topology later as the commit above intended.
Fixes: https://github.com/scylladb/scylladb/issues/20629
Need to be backported since this is a regression
(cherry picked from commit 644e7a2012)
(cherry picked from commit c0939d86f9)
(cherry picked from commit 1b4c255ffd)
Refs #20743Closesscylladb/scylladb#20829
* github.com:scylladb/scylladb:
test: amend test_replace_reuse_ip test to check that there is no stale writes after snapshot transfer starts
topology coordinator:: mark node as being replaced earlier
topology coordinator: do metadata barrier before calling finish_accepting_node() during replace
What it called "leader" is actually the destination of the RPC.
Trivial fix, should be backported to all affected versions.
(cherry picked from commit 09c68c0731)
Closesscylladb/scylladb#20826
This commit modifies the Features page in the following way:
- It adds a short introduction and descriptions to each listed feature.
- It hides the ToC (required to control and modify the information on the page,
e.g., to add descriptions, have full control over what is displayed, etc.)
- Removes the info about Enterprise features (following the request not to include
Enterprise info in the OSS docs)
Fixes https://github.com/scylladb/scylladb/issues/20617
Blocks https://github.com/scylladb/scylla-enterprise/pull/4711
(cherry picked from commit da8047a834)
Closesscylladb/scylladb#20811
This PR addresses multiple issues with alternator batch metrics:
1. Rename the metrics to scylla_alternator_batch_item_count with op=BatchGetItem/BatchWriteItem
2. The batch size calculation was wrong and didn't count all items in the batch.
3. Add a test to validate that the metrics values increase by the correct value (not just increase). This also requires an addition to the testing to validate ops of different metrics and an exact value change.
Needs backporting to allow the monitoring to use the correct metrics names.
Fixes#20571
(cherry picked from commit 515857a4a9)
(cherry picked from commit 905408f764)
(cherry picked from commit 4d57a43815)
(cherry picked from commit 8dec292698)
Refs #20646Closesscylladb/scylladb#20758
* github.com:scylladb/scylladb:
alternator:test_metrics test metrics for batch item count
alternator:test_metrics Add validating the increased value
alternator: Fix item counting in batch operations
Alterntor rename batch item count metrics
This commit fixes a link to the Manager by adding a missing underscore
to the external link.
(cherry picked from commit aa0c95c95c)
Closesscylladb/scylladb#20710
Before 17f4a151ce the node was marked as
been replaced in join_group0 state, before it actually joins the group0,
so by the time it actually joins and starts transferring snapshot/log no
traffic is sent to it. The commit changed this to mark the node as
being replaced after the snapshot/log is already transferred so we can
get the traffic to the node while it sill did not caught up with a
leader and this may causes problems since the state is not complete.
Mark the node as being replaced earlier, but still add the new node to
the topology later as the commit above intended.
(cherry picked from commit c0939d86f9)
During replace with the same IP a node may get queries that were intended
for the node it was replacing since the new node declares itself UP
before it advertises that it is a replacement. But after the node
starts replacing procedure the old node is marked as "being replaced"
and queries no longer sent there. It is important to do so before the
new node start to get raft snapshot since the snapshot application is
not atomic and queries that run parallel with it may see partial state
and fail in weird ways. Queries that are sent before that will fail
because schema is empty, so they will not find any tables in the first
place. The is pre-existing and not addressed by this patch.
(cherry picked from commit 644e7a2012)
The test performs consecutive schema changes in RECOVERY mode. The
second change relies on the first. However the driver might route the
changes to different servers and we don't have group 0 to guarantee
linearizability. We must rely on the first change coordinator to push
the schema mutations to other servers before returning, but that only
happens when it sees other servers as alive when doing the schema
change. It wasn't guaranteed in the test. Fix this.
Fixesscylladb/scylladb#20791
Should be backported to all branches containing this test to reduce
flakiness.
(cherry picked from commit f390d4020a)
Closesscylladb/scylladb#20807
In the current scenario, We check if a node being removed is normal
on the node initiating the removenode request. However, we don't have a
similar check on the topology coordinator. The node being removed could be
normal when we initiate the request, but it doesn't have to be normal when
the topology coordinator starts handling the request.
For example, the topology coordinator could have removed this node while handling
another removenode request that was added to the request queue earlier.
This commit intends to fix this issue by adding more checks in the enqueuing phase
and return errors for duplicate requests for node removal.
This PR fixes a bug. Hence we need to backport it.
Fixes: scylladb/scylladb#20271
(cherry picked from commit b25b8dccbd)
Closesscylladb/scylladb#20799
Currently the function calls boost::partial_sort with a middle
iterator that might be out of bound and cause undefined behavior.
Check the vector size, and do a partial sort only if its longer
than `max_sstables`, otherwise sort the whole vector.
Fixesscylladb/scylladb#20608
Signed-off-by: Benny Halevy <bhalevy@scylladb.com>
Closesscylladb/scylladb#20609
(cherry picked from commit 39ce358d82)
Refs: scylladb/scylladb#20609
This patch adds tests for the batch operations item count.
The tests validate that the metrics tracking the number of items
processed in a batch increase by the correct amount.
Signed-off-by: Amnon Heiman <amnon@scylladb.com>
(cherry picked from commit 8dec292698)
The `check_increases_operation` now allows override the checked metric.
Additionally, a custom validation value can now be passed, which make it
possible to validate the amount by which a value has changed, rather
than just validating that the value increased.
The default behavior of validating that values have increased remains
unchanged, ensuring backward compatibility.
Signed-off-by: Amnon Heiman <amnon@scylladb.com>
(cherry picked from commit 4d57a43815)
This patch fixes the logic for counting items in batch operations.
Previously, the item count in requests was inaccurate, it count the
number of tabels in get_item and the request_items in write_items.
The new logic correctly counts each individual item in `BatchGetItem`
and `BatchWriteItem` requests.
Signed-off-by: Amnon Heiman <amnon@scylladb.com>
(cherry picked from commit 905408f764)
This patch renames metrics tracking the total number of items in a batch
to `scylla_alternator_batch_item_count`. It uses the existing `op` label to
differentiate between `BatchGetItem` and `BatchWriteItem` operations.
Ensures better clarity and distinction for batch operations in monitoring.
This an example of how it looks like:
# HELP scylla_alternator_batch_item_count The total number of items processed across all batches
# TYPE scylla_alternator_batch_item_count counter
scylla_alternator_batch_item_count{op="BatchGetItem",shard="0"} 4
scylla_alternator_batch_item_count{op="BatchWriteItem",shard="0"} 4
(cherry picked from commit 515857a4a9)
In https://github.com/scylladb/scylladb/pull/18729, we introduced a new statement tenant $maintenance, but the change wasn't protected by any cluster feature.
This wasn't a problem for OSS, since unknown isolation cookie just uses default scheduling group. However, in enterprise that leads to creating a service level on not-upgraded nodes, which may end up in an error if user create maximum number of service levels.
This patch adds a cluster feature to guard adding the new tenant. It's done in the way to handle two upgrade scenarios:
version without $maintenance tenant -> version with $maintenance tenant guarded by a feature
version with $maintenance tenant but not guarded by a feature -> version with $maintenance tenant guarded by a feature
The PR adds enabled flag to statement tenants.
This way, when the tenant is disabled, it cannot be used to create a connection, but it can be used to accept an incoming connection.
The $maintenance tenant is added to the config as disabled and it gets enabled once the corresponding feature is enabled.
Fixes https://github.com/scylladb/scylladb/issues/20070
Refs https://github.com/scylladb/scylla-enterprise/issues/4403
(cherry picked from commit d44844241d)
(cherry picked from commit 71a03ef6b0)
(cherry picked from commit b4b91ca364)
Refs https://github.com/scylladb/scylladb/pull/19802Closesscylladb/scylladb#20690
* github.com:scylladb/scylladb:
message/messaging_service: guard adding maintenance tenant under cluster feature
message/messaging_service: add feature_service dependency
message/messaging_service: add `enabled` flag to statement tenants
Adding a new tenant needs to be done under cluster feature protection.
However it wasn't the case for adding `$maintenance` statement tenant
and to fix it we need to support an upgrade from node which doesn't
know about maintenance tenant at all and from one which uses it without
any cluster feature protection.
This commit adds `enabled` flag to statement tenants.
This way, when the tenant is disabled, it cannot be used to create
a connection, but it can be used to accept an incoming connection.
(cherry-picked from d44844241d)
parser.add_argument('--commits',default=None,type=str,help='Range of promoted commits.')
parser.add_argument('--pull-request',type=int,help='Pull request number to be backported')
parser.add_argument('--head-commit',type=str,required=is_pull_request(),help='The HEAD of target branch after the pull request specified by --pull-request is merged')
body: `❌ License header check failed. Please ensure all new files include the header within the first ${{ env.HEADER_CHECK_LINES }} lines:\n\`\`\`\n${license}\n\`\`\`\nSee action logs for details.`
# the "idl" subdirectory does not contain C++ source code. the .hh files in it are
# supposed to be processed by idl-compiler.py, so we don't check them using the cleaner
CLEANER_DIRS:test/unit exceptions alternator api auth cdc compaction db dht gms index lang message mutation mutation_writer node_ops raft redis replica service
if ! curl -X POST "$JENKINS_URL/job/$JOB_NAME/buildWithParameters" --fail --user "$JENKINS_USER:$JENKINS_API_TOKEN" -i -v; then
echo "Error: Jenkins job trigger failed"
# Send Slack message
curl -X POST -H 'Content-type: application/json' \
-H "Authorization: Bearer $SLACK_BOT_TOKEN" \
--data '{
"channel": "#releng-team",
"text": "🚨 @here '$JOB_NAME' failed to be triggered, please check https://github.com/${{ github.repository }}/actions/runs/${{ github.run_id }} for more details",
console.log("Looking for issues with labels:"+labelFilters+", excluding labels:"+excludingLabelFilters+ ", inactive for more than "+daysInactive+" days.");
@@ -12,7 +12,7 @@ Please use the [issue tracker](https://github.com/scylladb/scylla/issues/) to re
## Contributing code to Scylla
Before you can contribute code to Scylla for the first time, you should sign the [Contributor License Agreement](https://www.scylladb.com/open-source/contributor-agreement/) and send the signed form to cla@scylladb.com. You can then submit your changes as patches to the [scylladb-dev mailing list](https://groups.google.com/forum/#!forum/scylladb-dev) or as a pull request to the [Scylla project on github](https://github.com/scylladb/scylla).
Before you can contribute code to Scylla for the first time, you should sign the [Contributor License Agreement](https://www.scylladb.com/open-source/contributor-agreement/) and send the signed form cla@scylladb.com. You can then submit your changes as patches to the to the [scylladb-dev mailing list](https://groups.google.com/forum/#!forum/scylladb-dev) or as a pull request to the [Scylla project on github](https://github.com/scylladb/scylla).
If you need help formatting or sending patches, [check out these instructions](https://github.com/scylladb/scylla/wiki/Formatting-and-sending-patches).
The Scylla C++ source code uses the [Seastar coding style](https://github.com/scylladb/seastar/blob/master/coding-style.md) so please adhere to that in your patches. Note that Scylla code is written with `using namespace seastar`, so should not explicitly add the `seastar::` prefix to Seastar symbols. You will usually not need to add `using namespace seastar` to new source files, because most Scylla header files have `#include "seastarx.hh"`, which does this.
To interact with scylla it is recommended to build our version of
cqlsh. It is available at
https://github.com/scylladb/scylla-cqlsh and is available as a submodule.
To interact with scylla it is recommended to build our versions of
cqlsh and nodetool. They are available at
https://github.com/scylladb/scylla-tools-java and can be built with
```bash
$ sudo ./install-dependencies.sh
$ ant jar
```
cqlsh should work out of the box, but nodetool depends on a running
scylla-jmx (https://github.com/scylladb/scylla-jmx). It can be build
with
```bash
$ mvn package
```
and must be started with
```bash
$ ./scripts/scylla-jmx
```
### Branches and tags
@@ -261,45 +280,21 @@ Once the patch set is ready to be reviewed, push the branch to the public remote
### Development environment and source code navigation
Scylla includes a [CMake](https://cmake.org/) file, `CMakeLists.txt` that can be used with development environments so
that they can properly analyze the source code. However, building with CMake is not yet officially supported.
Scylla includes a [CMake](https://cmake.org/) file, `CMakeLists.txt`, for use only with development environments (not for building) so that they can properly analyze the source code.
Good IDEs that have support for CMake build toolchain are [CLion](https://www.jetbrains.com/clion/),
[KDevelop](https://www.kdevelop.org/) and [QtCreator](https://wiki.qt.io/Qt_Creator).
[CLion](https://www.jetbrains.com/clion/) is a commercial IDE offers reasonably good source code navigation and advice for code hygiene, though its C++ parser sometimes makes errors and flags false issues.
[Eclipse](https://eclipse.org/cdt/) is another open-source option. It doesn't natively work with CMake projects and its
C++ parser has many issues.
Other good options that directly parse CMake files are [KDevelop](https://www.kdevelop.org/) and [QtCreator](https://wiki.qt.io/Qt_Creator).
#### CLion
To use the `CMakeLists.txt` file with these programs, define the `FOR_IDE` CMake variable or shell environmental variable.
[CLion](https://www.jetbrains.com/clion/) is a commercial IDE offers reasonably good source code navigation and advice
for code hygiene, though its C++ parser sometimes makes errors and flags false issues. In order to enable proper code
analysis in CLion, the following steps are needed:
1. Get the ScyllaDB source code by following the [Getting the source code](#getting-the-source-code).
2. Follow the steps in [Dependencies](#dependencies) in order to install the required tools natively into your system.
**Don't** follow the *frozen toolchain* part described there, since CMake checks for the build dependencies installed
in the system, not in the container image provided by the toolchain.
3. In CLion, select `File`→`Open` and select the main ScyllaDB directory in order to open the CMake project there. The
project should open and fail to process the `CMakeLists.txt`. That's expected.
4. In CLion, open `File`→`Settings`.
5. Find and click on `Toolchains` (type *toolchains* into search box).
6. Select the toolchain you will use, for instance the `Default` one.
7. Type in the following system-installed tools to be used:
-`CMake`: *cmake*
-`Build Tool`: *ninja*
-`C Compiler`: *clang*
-`C++ Compiler`: *clang*
8. On the `CMake` panel/tab, click on `Reload CMake Project`
After that, CLion should successfully initialize the CMake project (marked by `[Finished]` in the console) and the
source code editor should provide code analysis support normally from now on.
[Eclipse](https://eclipse.org/cdt/) is another open-source option. It doesn't natively work with CMake projects, and its C++ parser has many similar issues as CLion.
### Distributed compilation: `distcc` and `ccache`
Scylla's compilations times can be long. Two tools help somewhat:
- [ccache](https://ccache.samba.org/) caches compiled object files on disk and reuses them when possible
- [ccache](https://ccache.samba.org/) caches compiled object files on disk and re-uses them when possible
- [distcc](https://github.com/distcc/distcc) distributes compilation jobs to remote machines
A reasonably-powered laptop acts as the coordinator for compilation. A second, more powerful, machine acts as a passive compilation server.
@@ -361,7 +356,7 @@ avoid that the gold linker can be told to create an index with
More info at https://gcc.gnu.org/wiki/DebugFission.
Both options can be enabled by passing `--split-dwarf` to configure.py.
Both options can be enable by passing `--split-dwarf` to configure.py.
Note that distcc is *not* compatible with it, but icecream
(https://github.com/icecc/icecream) is.
@@ -370,7 +365,7 @@ Note that distcc is *not* compatible with it, but icecream
Sometimes Scylla development is closely tied with a feature being developed in Seastar. It can be useful to compile Scylla with a particular check-out of Seastar.
One way to do this is to create a local remote for the Seastar submodule in the Scylla repository:
One way to do this it to create a local remote for the Seastar submodule in the Scylla repository:
By utilizing or accessing the Software in any manner, You hereby confirm and agree to be bound by this ScyllaDB Software License Agreement (the "**Agreement**"), which sets forth the terms and conditions on which ScyllaDB Ltd. ("**Licensor**") makes the Software available to You, as the Licensee. If Licensee does not agree to the terms of this Agreement or cannot otherwise comply with the Agreement, Licensee shall not utilize or access the Software.
The terms "**You**" or "**Licensee**" refer to any individual accessing or using the Software under this Agreement ("**Use**"). In case that such individual is Using the Software on behalf of a legal entity, You hereby irrevocably represents and warrants that You have full legal capacity and authority to enter into this Agreement on behalf of such entity as well as bind such entity to this Agreement, and in such case, the term "You" or "Licensee" in this Agreement will refer to such entity.
**Grant of License**
* **Software Definitions:** Software means the ScyllaDB software provided by Licensor, including the source code, object code, and any accompanying documentation or tools, or any part thereof, as made available under this Agreement.
* **Grant of License:** Subject to the terms and conditions of this Agreement, Licensor grants You a limited, non-exclusive, revocable, non-sublicensable, non-transferable, royalty free license to Use the Software, in each case solely for the purposes of:
1) Copying, distributing, evaluating (including performing benchmarking or comparative tests or evaluations , subject to the limitations below) and improving the Software and ScyllaDB; and
2) create a modified version of the Software (each, a "**Licensed Work**"); provided however, that each such Licensed Work keeps all or substantially all of the functions and features of the Software, and/or using all or substantially all of the source code of the Software. You hereby agree that all the Licensed Work are, upon creation, considered Licensed Work of the Licensor, shall be the sole property of the Licensor and its assignees, and the Licensor and its assignees shall be the sole owner of all rights of any kind or nature, in connection with such Licensed Work. You hereby irrevocably and unconditionally assign to the Licensor all the Licensed Work and any part thereof. This License applies separately for each version of the Licensed Work, which shall be considered "Software" for the purpose of this Agreement.
**License Limitations, Restrictions and Obligations:** The license grant above is subject to the following limitations, restrictions, and obligations. If Licensee’s Use of the Software does not comply with the above license grant or the terms of this section (including exceeding the Usage Limit set forth below), Licensee must: (i) refrain from any Use of the Software; and (ii) purchase a [commercial paid license](https://www.scylladb.com/scylladb-proprietary-software-license-agreement/) from the Licensor.
* **Updates:** You shall be solely responsible for providing all equipment, systems, assets, access, and ancillary goods and services needed to access and Use the Software. Licensor may modify or update the Software at any time, without notification, in its sole and absolute discretion. After the effective date of each such update, Licensor shall bear no obligation to run, provide or support legacy versions of the Software.
* **"Usage Limit":** Licensee's total overall available storage across all deployments and clusters of the Software and the Licensed Work under this License shall not exceed 10TB and/or an upper limit of 50 VCPUs (hyper threads).
* **IP Markings:** Licensee must retain all copyright, trademark, and other proprietary notices contained in the Software. You will not modify, delete, alter, remove, or obscure any intellectual property, including without limitations licensing, copyright, trademark, or any other notices of Licensor in the Software.
* **License Reproduction:** You must conspicuously display this Agreement on each copy of the Software. If You receive the Software from a third party, this Agreement still applies to Your Use of the Software. You will be responsible for any breach of this Agreement by any such third-party.
* Distribution of any Licensed Works is permitted, provided that: (i) You must include in any Licensed Work prominent notices stating that You have modified the Software, (ii) You include a copy of this Agreement with the Licensed Work, and (iii) You clearly identify all modifications made in the Licensed Work and provides attribution to the Licensor as the original author(s) of the Software.
* **Commercial Use Restrictions:** Licensee may not offer the Software as a software-as-a-service (SaaS) or commercial database-as-as-service (dBaaS) offering. Licensee may not use the Software to compete with Licensor's existing or future products or services. If your Use of the Software does not comply with the requirements currently in effect as described in this License, you must purchase a commercial license from the Licensor, its affiliated entities, or you must refrain from using the Software and all Licensed Work. Furthermore, if You make any written claim of patent infringement relating to the Software, Your patent license for the Software granted under this Agreement terminates immediately.
* Notwithstanding anything to the contrary, under the License granted hereunder, You shall not and shall not permit others to: (i) transfer the Software or any portions thereof to any other party except as expressly permitted herein; (ii) attempt to circumvent or overcome any technological protection measures incorporated into the Software; (iii) incorporate the Software into the structure, machinery or controls of any aircraft, other aerial device, military vehicle, hovercraft, waterborne craft or any medical equipment of any kind; or (iv) use the Software or any part thereof in any unlawful, harmful or illegal manner, or in a manner which infringes third parties’ rights in any way, including intellectual property rights.
**Monitoring; Audit**
* **License Key:** Licensor may implement a method of authentication, e.g., a unique license token ("License Key") as a condition of accessing or using the Software. Upon the implementation of such License Key, Licensee agrees to comply with Licensor terms and requirements with regards to such License Key
* **Monitoring & Data Sharing:** Licensor do not collect customer data from its database. Notwithstanding, Licensee acknowledges and agrees that the License Key and Software may share telemetry metrics and information regarding the execution volume and statistics with Licensor regarding Licensee’s use of the same. Any disclosure or use of such information shall be subject to, and in accordance with, Licensor’s Privacy Policy and Data Processing Agreement, which can be found at [https://www.scylladb.com/policies-agreements](https://www.scylladb.com/policies-agreements).
* **Information Requests; Audits:** Licensee shall keep accurate records of its access to and use of any Software, and shall promptly respond to any Licensor requests for information regarding the same. To ensure compliance with the terms of this Agreement, during the term of this Agreement and for a period of one (1) year thereafter, Licensor (or an agent bound by customary confidentiality undertakings on its behalf) may audit Licensee’s records which are related to its access to or use of the Software. The cost of such audit shall be borne by Licensor unless it is determined that Licensee has materially breached this Agreement.
**Termination**
* **Termination:** Licensor may immediately terminate this Agreement will automatically terminate if You for any reason, including without limitation for (i) Licensee’s breach of any term, condition, or restriction of this Agreement, unless such breach was cured to Licensor’s satisfaction within no more than 15 days from the date of the breach. Notwithstanding the foregoing, intentional; or (ii) if Licensee brings any claim, demand or repeated breaches lawsuit against Licensor.
* **Obligations on Termination:** Upon termination of this Agreement by You will cause Your licenses to terminate automatically and permanently, at Licensor’s sole discretion, Licensee must (i) immediately stop using any Software, (ii) return all copies of any tools or documentation provided by Licensor; and (iii) pay amount due to Licensor hereunder (e.g., audit costs). All obligations which by their nature must survive the termination of this Agreement shall so survive.
**Indemnity; Disclaimer; Limitation of Liability**
* **Indemnity:** Licensee hereby agrees to indemnify, defend and hold harmless Licensor and its affiliates from any losses or damages incurred due to a third party claim arising out of: (i) Licensee’s breach of this Agreement; (ii) Licensee’s negligence, willful misconduct or violation of law, or (iii) Licensee’s products or services.
* DISCLAIMER OF WARRANTIES: LICENSEE AGREES THAT LICENSOR HAS MADE NO EXPRESS WARRANTIES REGARDING THE SOFTWARE AND THAT THE SOFTWARE IS BEING PROVIDED "AS IS" WITHOUT WARRANTY OF ANY KIND. LICENSOR DISCLAIMS ALL WARRANTIES WITH REGARD TO THE SOFTWARE, EXPRESS OR IMPLIED, INCLUDING WITHOUT LIMITATION, ANY IMPLIED WARRANTIES OF FITNESS FOR A PARTICULAR PURPOSE; TITLE; MERCHANTABILITY; OR NON-INFRINGEMENT OF THIRD PARTY RIGHTS. LICENSOR DOES NOT WARRANT THAT THE SOFTWARE WILL OPERATE UNINTERRUPTED OR ERROR FREE, OR THAT ALL ERRORS WILL BE CORRECTED. LICENSOR DOES NOT GUARANTEE ANY PARTICULAR RESULTS FROM THE USE OF THE SOFTWARE, AND DOES NOT WARRANT THAT THE SOFTWARE IS FIT FOR ANY PARTICULAR PURPOSE.
* LIMITATION OF LIABILITY: TO THE FULLEST EXTENT PERMISSIBLE UNDER APPLICABLE LAW, IN NO EVENT WILL LICENSOR AND/OR ITS AFFILIATES, EMPLOYEES, OFFICERS AND DIRECTORS BE LIABLE TO LICENSEE FOR (I) ANY LOSS OF USE OR DATA; INTERRUPTION OF BUSINESS; OR ANY INDIRECT; SPECIAL; INCIDENTAL; OR CONSEQUENTIAL DAMAGES OF ANY KIND (INCLUDING LOST PROFITS); AND (II) ANY DIRECT DAMAGES EXCEEDING THE TOTAL AMOUNT OF ONE THOUSAND US DOLLARS ($1,000). THE FOREGOING PROVISIONS LIMITING THE LIABILITY OF LICENSOR SHALL APPLY REGARDLESS OF THE FORM OR CAUSE OF ACTION, WHETHER IN STRICT LIABILITY, CONTRACT OR TORT.
**Proprietary Rights; No Other Rights**
* **Ownership:** Licensor retains sole and exclusive ownership of all rights, interests and title in the Software and any scripts, processes, techniques, methodologies, inventions, know-how, concepts, formatting, arrangements, visual attributes, ideas, database rights, copyrights, patents, trade secrets, and other intellectual property related thereto, and all derivatives, enhancements, modifications and improvements thereof. Except for the limited license rights granted herein, Licensee has no rights in or to the Software and/ or Licensor’s trademarks, logo, or branding and You acknowledge that such Software, trademarks, logo, or branding is the sole property of Licensor.
* **Feedback:** Licensee is not required to provide any suggestions, enhancement requests, recommendations or other feedback regarding the Software ("Feedback"). If, notwithstanding this policy, Licensee submits Feedback, Licensee understands and acknowledges that such Feedback is not submitted in confidence and Licensor assumes no obligation, expressed or implied, by considering it. All right in any trademark or logo of Licensor or its affiliates and You shall make no claim of right to the Software or any part thereof to be supplied by Licensor hereunder and acknowledges that as between Licensor and You, such Software is the sole proprietary, title and interest in and to Licensor.such Feedback shall be assigned to, and shall become the sole and exclusive property of, Licensor upon its creation.
* Except for the rights expressly granted to You under this Agreement, You are not granted any other licenses or rights in the Software or otherwise. This Agreement constitutes the entire agreement between You and the Licensor with respect to the subject matter hereof and supersedes all prior or contemporaneous communications, representations, or agreements, whether oral or written.
* **Third-Party Software:** Customer acknowledges that the Software may contain open and closed source components (“OSS Components”) that are governed separately by certain licenses, in each case as further provided by Company upon request. Any applicable OSS Component license is solely between Licensee and the applicable licensor of the OSS Component and Licensee shall comply with the applicable OSS Component license.
* If any provision of this Agreement is held to be invalid or unenforceable, such provision shall be struck and the remaining provisions shall remain in full force and effect.
**Miscellaneous**
* **Miscellaneous:** This Agreement may be modified at any time by Licensor, and constitutes the entire agreement between the parties with respect to the subject matter hereof. Licensee may not assign or subcontract its rights or obligations under this Agreement. This Agreement does not, and shall not be construed to create any relationship, partnership, joint venture, employer-employee, agency, or franchisor-franchisee relationship between the parties.
* **Governing Law & Jurisdiction:** This Agreement shall be governed and construed in accordance with the laws of Israel, without giving effect to their respective conflicts of laws provisions, and the competent courts situated in Tel Aviv, Israel, shall have sole and exclusive jurisdiction over the parties and any conflict and/or dispute arising out of, or in connection to, this Agreement
slogger.warn("alternator_warn_authorization=true: {} for user {}, client address {}",e.what(),user,client_address);
}
throwstd::move(e);
}else{
if(warn_authorization){
slogger.warn("If you set alternator_enforce_authorization=true the following will be enforced: {} for user {}, client address {}",e.what(),user,client_address);
seastar::metrics::description("number of operations via Alternator API"),labels)(basic_level)(op(CamelCaseName)).aggregate(aggregate_labels).set_skip_when_empty(),
#define OPERATION_LATENCY(name, CamelCaseName) \
metrics.add_group(group_name,{ \
seastar::metrics::make_histogram("op_latency", \
seastar::metrics::description("Latency histogram of an operation via Alternator API"),labels,[&stats]{returnto_metrics_histogram(stats.api_operations.name.histogram());})(op(CamelCaseName))(basic_level).aggregate({seastar::metrics::shard_label}).set_skip_when_empty()}); \
seastar::metrics::description("Latency summary of an operation via Alternator API"),[&stats]{returnto_metrics_summary(stats.api_operations.name.summary());})(op(CamelCaseName))(basic_level)(alternator_label).set_skip_when_empty()}); \
seastar::metrics::description("number of operations via Alternator API"),{op(CamelCaseName)}).set_skip_when_empty(),
#define OPERATION_LATENCY(name, CamelCaseName) \
seastar::metrics::make_histogram("op_latency", \
seastar::metrics::description("Latency histogram of an operation via Alternator API"),{op(CamelCaseName)},[this]{returnto_metrics_histogram(api_operations.name.histogram());}).aggregate({seastar::metrics::shard_label}).set_skip_when_empty(), \
seastar::metrics::description("Latency summary of an operation via Alternator API"),[this]{returnto_metrics_summary(api_operations.name.summary());})(op(CamelCaseName)).set_skip_when_empty(),
seastar::metrics::description("number writes that had to be bounced from this shard because of LWT requirements"),labels).aggregate(aggregate_labels).set_skip_when_empty(),
seastar::metrics::description("Counts a number of requests blocked due to memory pressure."),labels).aggregate(aggregate_labels).set_skip_when_empty(),
seastar::metrics::description("number of rows read and matched during filtering operations"),labels).aggregate(aggregate_labels).set_skip_when_empty(),
seastar::metrics::description("number of rows read and dropped during filtering operations"),labels).aggregate(aggregate_labels).set_skip_when_empty(),
seastar::metrics::make_counter("batch_item_count",seastar::metrics::description("The total number of items processed across all batches"),labels,
seastar::metrics::make_histogram("batch_item_count_histogram",seastar::metrics::description("Histogram of the number of items in a batch request"),labels,
seastar::metrics::make_histogram("batch_item_count_histogram",seastar::metrics::description("Histogram of the number of items in a batch request"),labels,
seastar::metrics::description("number of rows read and dropped during filtering operations")),
seastar::metrics::make_counter("batch_item_count",seastar::metrics::description("The total number of items processed across all batches"),{op("BatchWriteItem")},
seastar::metrics::make_counter("batch_item_count",seastar::metrics::description("The total number of items processed across all batches"),{op("BatchGetItem")},
seastar::metrics::description("Counts number of hits of cached expressions"),labels)(expression_label("UpdateExpression")).aggregate(aggregate_labels).set_skip_when_empty(),
seastar::metrics::description("Counts number of misses of cached expressions"),labels)(expression_label("UpdateExpression")).aggregate(aggregate_labels).set_skip_when_empty(),
seastar::metrics::description("Counts number of hits of cached expressions"),labels)(expression_label("ConditionExpression")).aggregate(aggregate_labels).set_skip_when_empty(),
seastar::metrics::description("Counts number of misses of cached expressions"),labels)(expression_label("ConditionExpression")).aggregate(aggregate_labels).set_skip_when_empty(),
seastar::metrics::description("Counts number of hits of cached expressions"),labels)(expression_label("ProjectionExpression")).aggregate(aggregate_labels).set_skip_when_empty(),
seastar::metrics::description("Counts number of misses of cached expressions"),labels)(expression_label("ProjectionExpression")).aggregate(aggregate_labels).set_skip_when_empty()
});
// Only register the following metrics for the global metrics, not per-table
seastar::metrics::description("number of table scans (counting each scan of each table that enabled expiration)"))(alternator_label).set_skip_when_empty(),
seastar::metrics::description("number of table scans (counting each scan of each table that enabled expiration)")),
seastar::metrics::description("number of token ranges scanned by this node while their primary owner was down"))(alternator_label).set_skip_when_empty(),
seastar::metrics::description("number of token ranges scanned by this node while their primary owner was down")),
"summary":"This method returns the N endpoints that are responsible for storing the specified key i.e for replication. the endpoint responsible for this key",
"type":"array",
"items":{
"type":"string"
},
"nickname":"get_natural_endpoints_v2",
"produces":[
"application/json"
],
"parameters":[
{
"name":"keyspace",
"description":"The keyspace to query about.",
"required":true,
"allowMultiple":false,
"type":"string",
"paramType":"path"
},
{
"name":"cf",
"description":"Column family name.",
"required":true,
"allowMultiple":false,
"type":"string",
"paramType":"query"
},
{
"name":"key_component",
"description":"Each component of the key for which we need to find the endpoint (e.g. ?key_component=part1&key_component=part2).",
"description":"The prefix of the objects for the backuped sstables",
"required":true,
"allowMultiple":false,
"type":"string",
"paramType":"query"
},
{
"name":"keyspace",
"description":"Name of a keyspace to copy sstables from",
@@ -861,14 +790,6 @@
"type":"string",
"paramType":"query"
},
{
"name":"table",
"description":"Name of a table to copy sstables from",
"required":true,
"allowMultiple":false,
"type":"string",
"paramType":"query"
},
{
"name":"snapshot",
"description":"Name of a snapshot to copy sstables from",
@@ -876,14 +797,6 @@
"allowMultiple":false,
"type":"string",
"paramType":"query"
},
{
"name":"move_files",
"description":"Move component files instead of copying them",
"required":false,
"allowMultiple":false,
"type":"boolean",
"paramType":"query"
}
]
}
@@ -918,25 +831,13 @@
"paramType":"query"
},
{
"name":"prefix",
"description":"The prefix of the object keys for the backuped SSTables",
"name":"snapshot",
"description":"Name of a snapshot to copy SSTables from",
"required":true,
"allowMultiple":false,
"type":"string",
"paramType":"query"
},
{
"in":"body",
"name":"sstables",
"description":"The list of the object keys of the TOC component of the SSTables to be restored",
"required":true,
"schema":{
"type":"array",
"items":{
"type":"string"
}
}
},
{
"name":"keyspace",
"description":"Name of a keyspace to copy SSTables to",
@@ -948,19 +849,10 @@
{
"name":"table",
"description":"Name of a table to copy SSTables to",
"required":true,
"allowMultiple":false,
"type":"string",
"paramType":"query"
},
{
"name":"scope",
"description":"Defines the set of nodes to which mutations can be streamed",
"required":false,
"allowMultiple":false,
"type":"string",
"paramType":"query",
"enum":["all","dc","rack","node"]
"paramType":"query"
}
]
}
@@ -1163,14 +1055,6 @@
"allowMultiple":false,
"type":"string",
"paramType":"query"
},
{
"name":"drop_unfixable_sstables",
"description":"When set to true, drop unfixable sstables. Applies only to scrub mode SEGREGATE.",
"required":false,
"allowMultiple":false,
"type":"boolean",
"paramType":"query"
}
]
}
@@ -1590,30 +1474,6 @@
}
]
},
{
"path":"/storage_service/exclude_node",
"operations":[
{
"method":"POST",
"summary":"Marks the node as permanently down (excluded).",
"type":"void",
"nickname":"exclude_node",
"produces":[
"application/json"
],
"parameters":[
{
"name":"hosts",
"description":"Comma-separated list of host ids to exclude",
"required":true,
"allowMultiple":false,
"type":"string",
"paramType":"query"
}
]
}
]
},
{
"path":"/storage_service/removal_status",
"operations":[
@@ -1751,6 +1611,38 @@
}
]
},
{
"path":"/storage_service/truncate/{keyspace}",
"operations":[
{
"method":"POST",
"summary":"Truncates (deletes) the given columnFamily from the provided keyspace. Calling truncate results in actual deletion of all data in the cluster under the given columnFamily and it will fail unless all hosts are up. All data in the given column family will be deleted, but its definition will not be affected.",
"type":"void",
"nickname":"truncate",
"produces":[
"application/json"
],
"parameters":[
{
"name":"keyspace",
"description":"The keyspace",
"required":true,
"allowMultiple":false,
"type":"string",
"paramType":"path"
},
{
"name":"cf",
"description":"Column family name",
"required":false,
"allowMultiple":false,
"type":"string",
"paramType":"query"
}
]
}
]
},
{
"path":"/storage_service/keyspaces",
"operations":[
@@ -2239,31 +2131,6 @@
"allowMultiple":false,
"type":"string",
"paramType":"query"
},
{
"name":"skip_cleanup",
"description":"Don't cleanup keys from loaded sstables. Invalid if load_and_stream is true",
"required":false,
"allowMultiple":false,
"type":"string",
"paramType":"query"
},
{
"name":"skip_reshape",
"description":"Don't reshape the loaded sstables. Invalid if load_and_stream is true",
"required":false,
"allowMultiple":false,
"type":"string",
"paramType":"query"
},
{
"name":"scope",
"description":"Defines the set of nodes to which mutations can be streamed",
"required":false,
"allowMultiple":false,
"type":"string",
"paramType":"query",
"enum":["all","dc","rack","node"]
}
]
}
@@ -2957,78 +2824,6 @@
}
]
},
{
"path":"/storage_service/tablets/repair",
"operations":[
{
"nickname":"repair_tablet",
"method":"POST",
"summary":"Repair a tablet",
"type":"tablet_repair_result",
"produces":[
"application/json"
],
"parameters":[
{
"name":"ks",
"description":"Keyspace name to repair",
"required":true,
"allowMultiple":false,
"type":"string",
"paramType":"query"
},
{
"name":"table",
"description":"Table name to repair",
"required":true,
"allowMultiple":false,
"type":"string",
"paramType":"query"
},
{
"name":"tokens",
"description":"Tokens owned by the tablets to repair. Multiple tokens can be provided using a comma-separated list. When set to the special word 'all', all tablets will be repaired",
"required":true,
"allowMultiple":false,
"type":"string",
"paramType":"query"
},
{
"name":"hosts_filter",
"description":"Repair replicas listed in the comma-separated host_id list.",
"required":false,
"allowMultiple":false,
"type":"string",
"paramType":"query"
},
{
"name":"dcs_filter",
"description":"Repair replicas listed in the comma-separated DC list",
"required":false,
"allowMultiple":false,
"type":"string",
"paramType":"query"
},
{
"name":"await_completion",
"description":"Set true to wait for the repair to complete. Set false to skip waiting for the repair to complete. When the option is not provided, it defaults to false.",
"required":false,
"allowMultiple":false,
"type":"string",
"paramType":"query"
},
{
"name":"incremental_mode",
"description":"Set the incremental repair mode. Can be 'disabled', 'incremental', or 'full'. 'incremental': The incremental repair logic is enabled. Unrepaired sstables will be included for repair. Repaired sstables will be skipped. The incremental repair states will be updated after repair. 'full': The incremental repair logic is enabled. Both repaired and unrepaired sstables will be included for repair. The incremental repair states will be updated after repair. 'disabled': The incremental repair logic is disabled completely. The incremental repair states, e.g., repaired_at in sstables and sstables_repaired_at in the system.tablets table, will not be updated after repair. When the option is not provided, it defaults to incremental mode.",
"required":false,
"allowMultiple":false,
"type":"string",
"paramType":"query"
}
]
}
]
},
{
"path":"/storage_service/tablets/balancing",
"operations":[
@@ -3155,73 +2950,6 @@
}
]
},
{
"path":"/storage_service/retrain_dict",
"operations":[
{
"method":"POST",
"summary":"Retrain the SSTable compression dictionary for the target table.",
"type":"void",
"nickname":"retrain_dict",
"produces":[
"application/json"
],
"parameters":[
{
"name":"keyspace",
"description":"Name of the keyspace containing the target table.",
"description":"Set to \"true\" to flush all memtables and force tombstone garbage collection to check only the sstables being compacted (false by default). The memtable, commitlog and other uncompacted sstables will not be checked during tombstone garbage collection.",
Some files were not shown because too many files have changed in this diff
Show More
Reference in New Issue
Block a user
Blocking a user prevents them from interacting with repositories, such as opening or commenting on pull requests or issues. Learn more about blocking a user.
