the `NewClient` method is called by the load test framework for each connection. This means that if multiple connections are instantiated, each connection will erroneously have its own UUID. This PR changes the UUID generation to happen at the _beginning_ of the script instead of on client creation so that each experimental run shares a UUID.
Caught while preparing the script for production readiness.
#### PR checklist
- [ ] Tests written/updated, or no tests needed
- [ ] `CHANGELOG_PENDING.md` updated, or no changelog entry needed
- [ ] Updated relevant documentation (`docs/`) and code comments, or no
documentation updates needed
This _should_ be the last piece needed for this tool.
This allows the tool to generate reports on multiple experimental runs that may have been performed against the same chain.
The `load` tool has been updated to generate a `UUID` on startup to uniquely identify each experimental run. The `report` tool separates all of the results it reads by `UUID` and performs separate calculations for each discovered experiment.
Sample output is as follows
```
Experiment ID: 6bd7d1e8-d82c-4dbe-a1b3-40ab99e4fa30
Connections: 1
Rate: 1000
Size: 1024
Total Valid Tx: 9000
Total Negative Latencies: 0
Minimum Latency: 86.632837ms
Maximum Latency: 1.151089602s
Average Latency: 813.759361ms
Standard Deviation: 225.189977ms
Experiment ID: 453960af-6295-4282-aed6-367fc17c0de0
Connections: 1
Rate: 1000
Size: 1024
Total Valid Tx: 9000
Total Negative Latencies: 0
Minimum Latency: 79.312992ms
Maximum Latency: 1.162446243s
Average Latency: 422.755139ms
Standard Deviation: 241.832475ms
Total Invalid Tx: 0
```
closes: #9352
#### PR checklist
- [ ] Tests written/updated, or no tests needed
- [ ] `CHANGELOG_PENDING.md` updated, or no changelog entry needed
- [ ] Updated relevant documentation (`docs/`) and code comments, or no
documentation updates needed
This is by no means a signal that we offer any additional guarantees with our software. This warning seems somewhat pointless given that:
1. Our open source license clearly states that we offer no warranties with this software.
2. We are clearly still pre-1.0.
It also doesn't make sense to append "(WARNING: BETA SOFTWARE)" to pre-releases such as alpha releases, which are to be considered _more_ unstable than beta releases.
---
#### PR checklist
- [x] Tests written/updated, or no tests needed
- [x] `CHANGELOG_PENDING.md` updated, or no changelog entry needed
- [x] Updated relevant documentation (`docs/`) and code comments, or no
documentation updates needed
In preparation for the v0.37 release, this PR updates:
1. The [release guidelines](https://github.com/tendermint/tendermint/blob/thane/pre-release-workflows/RELEASES.md#pre-releases) regarding alpha and beta versions, as well as release candidates.
2. The GitHub workflows to build all 3 kinds of pre-releases for:
1. Docker images
2. Binaries (I'm still not 100% sure whether this is necessary, but it does act as a clear signal to users that a pre-release is available, and pre-built binaries could be useful for people running testnets who don't use Docker)
3. The Goreleaser config to auto-detect whether a tag is a pre-release and mark it as such as the release is created on GitHub.
---
#### PR checklist
- [x] Tests written/updated, or no tests needed
- [x] `CHANGELOG_PENDING.md` updated, or no changelog entry needed
- [x] Updated relevant documentation (`docs/`) and code comments, or no
documentation updates needed
This pull request adds the loadtime tool. This tool leverages the tm-load-test framework. Using the framework means that the only real logic that needs to be written is the logic for Tx generation. The framework does the rest.
The tool writes a set of metadata into the transaction, including the current transaction rate, number of connections, specified size of the transaction, and the current time.
* Update docs references from master to main
Signed-off-by: Thane Thomson <connect@thanethomson.com>
* Update DOCS_README to reflect current reality
Signed-off-by: Thane Thomson <connect@thanethomson.com>
* Update vuepress config with current versions and updated discussions link
Signed-off-by: Thane Thomson <connect@thanethomson.com>
* Update generated docs versions
Signed-off-by: Thane Thomson <connect@thanethomson.com>
* Update docs build to use temp folder instead of home
Signed-off-by: Thane Thomson <connect@thanethomson.com>
* Document build-docs Makefile target
Signed-off-by: Thane Thomson <connect@thanethomson.com>
* Add serve-docs Makefile target to serve local build of docs
Signed-off-by: Thane Thomson <connect@thanethomson.com>
* Ensure 404 page is copied during docs build
Signed-off-by: Thane Thomson <connect@thanethomson.com>
* Redirect /master/ to /main/
Signed-off-by: Thane Thomson <connect@thanethomson.com>
* Attempt to resolve#7908
Signed-off-by: Thane Thomson <connect@thanethomson.com>
* Update OpenAPI references from master to main
Signed-off-by: Thane Thomson <connect@thanethomson.com>
* Update CHANGELOG references from master to main
Signed-off-by: Thane Thomson <connect@thanethomson.com>
* Update Docker readme references from master to main
Signed-off-by: Thane Thomson <connect@thanethomson.com>
* Update UPGRADING references from master to main
Signed-off-by: Thane Thomson <connect@thanethomson.com>
* Update package-specific documentation references from master to main
Signed-off-by: Thane Thomson <connect@thanethomson.com>
* Update spec references from master to main
Signed-off-by: Thane Thomson <connect@thanethomson.com>
* Update all code comment references to docs site from master to main
Signed-off-by: Thane Thomson <connect@thanethomson.com>
* Build v0.34.x as "latest"
Signed-off-by: Thane Thomson <connect@thanethomson.com>
* Explicitly mark v0.34 docs as latest in version selector
Signed-off-by: Thane Thomson <connect@thanethomson.com>
* Update all links from docs.tendermint.com/main to docs.tendermint.com/latest
Signed-off-by: Thane Thomson <connect@thanethomson.com>
* ci: Redeploy docs on pushes to v0.34.x
Signed-off-by: Thane Thomson <connect@thanethomson.com>
* Temporarily copy spec directory into docs while building
Signed-off-by: Thane Thomson <connect@thanethomson.com>
* Add nav link to main and clearly mark as unstable
Signed-off-by: Thane Thomson <connect@thanethomson.com>
* Revert to only publishing docs in nav for v0.34 and v0.33 with no latest
Signed-off-by: Thane Thomson <connect@thanethomson.com>
* Link to docs.tendermint.com/v0.34 from RFCs
Signed-off-by: Thane Thomson <connect@thanethomson.com>
* Rather just use main for all docs.tendermint.com references on main branch
Signed-off-by: Thane Thomson <connect@thanethomson.com>
* Rename GitHub tree links from master to main
Signed-off-by: Thane Thomson <connect@thanethomson.com>
* Update link for ABCI Rust client
Signed-off-by: Thane Thomson <connect@thanethomson.com>
* Update github links from master to main
Signed-off-by: Thane Thomson <connect@thanethomson.com>
* Update badges in root readme
Signed-off-by: Thane Thomson <connect@thanethomson.com>
* Remove codecov badge since we do not use it any more
Signed-off-by: Thane Thomson <connect@thanethomson.com>
* Remove Java and Kotlin tutorials
Signed-off-by: Thane Thomson <connect@thanethomson.com>
* Remove specs from docs build
Signed-off-by: Thane Thomson <connect@thanethomson.com>
* Migrate spec links to GitHub repo from docs site
Signed-off-by: Thane Thomson <connect@thanethomson.com>
* Remove references to non-existent PEX reactor spec
Signed-off-by: Thane Thomson <connect@thanethomson.com>
* Fix linting badge in README
Signed-off-by: Thane Thomson <connect@thanethomson.com>
Signed-off-by: Thane Thomson <connect@thanethomson.com>
This changes the ResponsePrepareProposal type, substituting the []TxRecord for just []bytes. This change is made in the .proto file and in all necessary additional places in the code.
This is largely a cherry pick of #6755 with some additional fixups added where detected.
This change moves the blockchain package to a package called blocksync. Additionally, it renames the relevant uses of the term `fastsync` to `blocksync`.
closes: #9227
#### PR checklist
- [ ] Tests written/updated, or no tests needed
- [x] `CHANGELOG_PENDING.md` updated, or no changelog entry needed
- [x] Updated relevant documentation (`docs/`) and code comments, or no
documentation updates needed
