shout out to @joeabbey for the inspiration. This makes the lazy
functions internal by default to prevent potential misuse by external
callers.
Should backport cleanly into 0.36 and I'll handle a messy merge into 0.35
* e2e: Extract Docker-specific functionality
Extract Docker-specific functionality and put it behind an interface
that should hopefully, without too much modification, allow us to
implement a Digital Ocean-based infrastructure provider.
Signed-off-by: Thane Thomson <connect@thanethomson.com>
* Thread contexts through all potentially long-running functions
Signed-off-by: Thane Thomson <connect@thanethomson.com>
* Drop the "API" from interface/struct/var naming
Signed-off-by: Thane Thomson <connect@thanethomson.com>
* Simplify function returns
Signed-off-by: Thane Thomson <connect@thanethomson.com>
* Rename GenerateConfig to Setup to make it more generic
Signed-off-by: Thane Thomson <connect@thanethomson.com>
* Consolidate all infra functions into a single interface
Signed-off-by: Thane Thomson <connect@thanethomson.com>
* Localize linter directives
Signed-off-by: Thane Thomson <connect@thanethomson.com>
* Look up and use complete node in ShowNodeLogs and TailNodeLogs calls
Signed-off-by: Thane Thomson <connect@thanethomson.com>
* Restructure infra provider API into a separate package
Signed-off-by: Thane Thomson <connect@thanethomson.com>
* Rename interface again
Signed-off-by: Thane Thomson <connect@thanethomson.com>
* Rename exec functions for readability
Signed-off-by: Thane Thomson <connect@thanethomson.com>
* Relocate staticcheck lint directive
Signed-off-by: Thane Thomson <connect@thanethomson.com>
* Remove staticcheck lint directive
Signed-off-by: Thane Thomson <connect@thanethomson.com>
* Make testnet infra struct private
Signed-off-by: Thane Thomson <connect@thanethomson.com>
* Only pass testnetDir to Cleanup function
Signed-off-by: Thane Thomson <connect@thanethomson.com>
This pull requests adds the protocol buffer field for the `ABCI.VoteExtensionsEnableHeight` parameter. This proto field is threaded throughout all of the relevant places where consensus params are used and referenced.
This PR also adds validation of the consensus param updates. Previous consensus param changes didn't depend on _previous_ versions of the params, so this change adds a method for validating against the old params as well.
closes: #8453
This PR makes vote extensions optional within Tendermint. A new ConsensusParams field, called ABCIParams.VoteExtensionsEnableHeight, has been added to toggle whether or not extensions should be enabled or disabled depending on the current height of the consensus engine. Related to: #8453
In #3435 we allowed this timeout to override the global write timeout.
But after #8570 this meant we were applying a shorter timeout by default.
Don't do the patch if the timeout is already unlimited.
This is a temporary workaround; in light of #8561 I plan to get rid of this
option entirely during the v0.37 cycle, but meanwhile we should keep existing
use more or less coherent.
Pass all parameters from JSON-RPC requests to their corresponding handlers
using struct types instead of positional parameters. This allows us to control
encoding of arguments using only the standard library, and to eliminate the
remaining special-purpose JSON encoding hooks in the server.
To support existing use, the server still allows arguments to be encoded in
JSON as either an array or an object.
Related changes:
- Rework the RPCFunc constructor to reduce reflection during RPC call service.
- Add request parameter wrappers for each RPC service method.
- Update the RPC Environment methods to use these types.
- Update the interfaces and shims derived from Environment to the new
signatures.
- Update and extend test cases.
In the conversion to Go 1.18 fuzzing in e4991fd862,
a `return 0` was converted to a panic. A `return 0` is a hint to the fuzzer, not
a failing testcase.
While here, clean up the test by folding setup code into it.
* Refactor so building and linting works
This is the first step towards implementing vote extensions: generating
the relevant proto stubs and getting the build and linter to pass.
Signed-off-by: Thane Thomson <connect@thanethomson.com>
* Fix typo
Signed-off-by: Thane Thomson <connect@thanethomson.com>
* Better describe method given vote extensions
Signed-off-by: Thane Thomson <connect@thanethomson.com>
* Fix types tests
Signed-off-by: Thane Thomson <connect@thanethomson.com>
* Move CanonicalVoteExtension to canonical types proto defs
Signed-off-by: Thane Thomson <connect@thanethomson.com>
* Regenerate protos including latest PBTS synchrony params update
Signed-off-by: Thane Thomson <connect@thanethomson.com>
* Inject vote extensions into proposal
Signed-off-by: Thane Thomson <connect@thanethomson.com>
* Thread vote extensions through code and fix tests
Signed-off-by: Thane Thomson <connect@thanethomson.com>
* Remove extraneous empty value initialization
Signed-off-by: Thane Thomson <connect@thanethomson.com>
* Fix lint
Signed-off-by: Thane Thomson <connect@thanethomson.com>
* Fix missing VerifyVoteExtension request data
Signed-off-by: Thane Thomson <connect@thanethomson.com>
* Explicitly ensure length > 0 to sign vote extension
Signed-off-by: Thane Thomson <connect@thanethomson.com>
* Explicitly ensure length > 0 to sign vote extension
Signed-off-by: Thane Thomson <connect@thanethomson.com>
* Remove extraneous comment
Signed-off-by: Thane Thomson <connect@thanethomson.com>
* Update privval/file.go
Co-authored-by: M. J. Fromberger <fromberger@interchain.io>
* Update types/vote_test.go
Co-authored-by: M. J. Fromberger <fromberger@interchain.io>
* Format
Signed-off-by: Thane Thomson <connect@thanethomson.com>
* Fix ABCI proto generation scripts for Linux
Signed-off-by: Thane Thomson <connect@thanethomson.com>
* Sync intermediate and goal protos
Signed-off-by: Thane Thomson <connect@thanethomson.com>
* Update internal/consensus/common_test.go
Co-authored-by: Sergio Mena <sergio@informal.systems>
* Use dummy value with clearer meaning
Signed-off-by: Thane Thomson <connect@thanethomson.com>
* Rewrite loop for clarity
Signed-off-by: Thane Thomson <connect@thanethomson.com>
* Panic on ABCI++ method call failure
Signed-off-by: Thane Thomson <connect@thanethomson.com>
* Add strong correctness guarantees when constructing extended commit info for ABCI++
Signed-off-by: Thane Thomson <connect@thanethomson.com>
* Add strong guarantee in extendedCommitInfo that the number of votes corresponds
Signed-off-by: Thane Thomson <connect@thanethomson.com>
* Make extendedCommitInfo function more robust
At first extendedCommitInfo expected votes to be in the same order as
their corresponding validators in the supplied CommitInfo struct, but
this proved to be rather difficult since when a validator set's loaded
from state it's first sorted by voting power and then by address.
Instead of sorting the votes in the same way, this approach simply maps
votes to their corresponding validator's address prior to constructing
the extended commit info. This way it's easy to look up the
corresponding vote and we don't need to care about vote order.
Signed-off-by: Thane Thomson <connect@thanethomson.com>
* Remove extraneous validator address assignment
Signed-off-by: Thane Thomson <connect@thanethomson.com>
* Sign over canonical vote extension
Signed-off-by: Thane Thomson <connect@thanethomson.com>
* Validate vote extension signature against canonical vote extension
Signed-off-by: Thane Thomson <connect@thanethomson.com>
* Update privval tests for more meaningful dummy value
Signed-off-by: Thane Thomson <connect@thanethomson.com>
* Add vote extension capability to E2E test app
Signed-off-by: Thane Thomson <connect@thanethomson.com>
* Disable lint for weak RNG usage for test app
Signed-off-by: Thane Thomson <connect@thanethomson.com>
* Use parseVoteExtension instead of custom parsing in PrepareProposal
Signed-off-by: Thane Thomson <connect@thanethomson.com>
* Only include extension if we have received txs
It's unclear at this point why this is necessary to ensure that the
application's local app_hash matches that committed in the previous
block.
Signed-off-by: Thane Thomson <connect@thanethomson.com>
* Require app_hash from app to match that from last block
Signed-off-by: Thane Thomson <connect@thanethomson.com>
* Add contrived (possibly flaky) test to check that vote extensions code works
Signed-off-by: Thane Thomson <connect@thanethomson.com>
* Remove workaround for problem now solved by #8229
Signed-off-by: Thane Thomson <connect@thanethomson.com>
* add tests for vote extension cases
* Fix spelling mistake to appease linter
Signed-off-by: Thane Thomson <connect@thanethomson.com>
* Collapse redundant if statement
Signed-off-by: Thane Thomson <connect@thanethomson.com>
* Formatting
Signed-off-by: Thane Thomson <connect@thanethomson.com>
* Always expect an extension signature, regardless of whether an extension is present
Signed-off-by: Thane Thomson <connect@thanethomson.com>
* Votes constructed from commits cannot include extensions or signatures
Signed-off-by: Thane Thomson <connect@thanethomson.com>
* Pass through vote extension in test helpers
Signed-off-by: Thane Thomson <connect@thanethomson.com>
* Temporarily disable vote extension signature requirement
Signed-off-by: Thane Thomson <connect@thanethomson.com>
* Expand on vote equality test errors for clarity
Signed-off-by: Thane Thomson <connect@thanethomson.com>
* Expand on vote matching error messages in testing
Signed-off-by: Thane Thomson <connect@thanethomson.com>
* Allow for selective subscription by vote type
This is an attempt to fix the intermittently failing
`TestPrepareProposalReceivesVoteExtensions` test in the internal
consensus package.
Occasionally we get prevote messages via the subscription channel, and
we're not interested in those. This change allows us to specify what
types of votes we're interested in (i.e. precommits) and discard the
rest.
Signed-off-by: Thane Thomson <connect@thanethomson.com>
* Read lock consensus state mutex in test helper to avoid data race
Signed-off-by: Thane Thomson <connect@thanethomson.com>
* Revert BlockIDFlag parameter in node test
Signed-off-by: Thane Thomson <connect@thanethomson.com>
* Perform additional check in ProcessProposal for special txs generated by vote extensions
Signed-off-by: Thane Thomson <connect@thanethomson.com>
* e2e: check that our added tx does not cause all txs to exceed req.MaxTxBytes
Signed-off-by: Thane Thomson <connect@thanethomson.com>
* Only set vote extension signatures when signing is successful
Signed-off-by: Thane Thomson <connect@thanethomson.com>
* Remove channel capacity constraint in test helper to avoid missing messages
Signed-off-by: Thane Thomson <connect@thanethomson.com>
* Add TODO to always require extension signatures in vote validation
Signed-off-by: Thane Thomson <connect@thanethomson.com>
* e2e: reject vote extensions if the request height does not match what we expect
Signed-off-by: Thane Thomson <connect@thanethomson.com>
* types: remove extraneous call to voteWithoutExtension in test
Signed-off-by: Thane Thomson <connect@thanethomson.com>
* Remove unnecessary address parameter from CanonicalVoteExtension
Signed-off-by: Thane Thomson <connect@thanethomson.com>
* privval: change test vote type to precommit since we use an extension
Signed-off-by: Thane Thomson <connect@thanethomson.com>
* privval: update signing logic to cater for vote extensions
Signed-off-by: Thane Thomson <connect@thanethomson.com>
* proto: update field descriptions for vote message
Signed-off-by: Thane Thomson <connect@thanethomson.com>
* proto: update field description for vote extension sig in vote message
Signed-off-by: Thane Thomson <connect@thanethomson.com>
* proto/types: use fixed-length 64-bit integers for rounds in CanonicalVoteExtension
Signed-off-by: Thane Thomson <connect@thanethomson.com>
* consensus: fix flaky TestPrepareProposalReceivesVoteExtensions
Signed-off-by: Thane Thomson <connect@thanethomson.com>
* consensus: remove previously added test helper functionality
Signed-off-by: Thane Thomson <connect@thanethomson.com>
* e2e: add error logs when we get an unexpected height in ExtendVote or VerifyVoteExtension requests
Signed-off-by: Thane Thomson <connect@thanethomson.com>
* node_test: get validator addresses from privvals
Signed-off-by: Thane Thomson <connect@thanethomson.com>
* privval/file_test: optimize filepv creation in tests
Signed-off-by: Thane Thomson <connect@thanethomson.com>
* privval: add test to check that vote extensions are always signed
Signed-off-by: Thane Thomson <connect@thanethomson.com>
* Add a script to check documentation for ToC entries. (#8356)
This script verifies that each document in the docs and architecture directory
has a corresponding table-of-contents entry in its README file. It can be run
manually from the command line.
- Hook up this script to run in CI (optional workflow).
- Update ADR ToC to include missing entries this script found.
* build(deps): Bump async from 2.6.3 to 2.6.4 in /docs (#8357)
Bumps [async](https://github.com/caolan/async) from 2.6.3 to 2.6.4.
- [Release notes](https://github.com/caolan/async/releases)
- [Changelog](https://github.com/caolan/async/blob/v2.6.4/CHANGELOG.md)
- [Commits](https://github.com/caolan/async/compare/v2.6.3...v2.6.4)
---
updated-dependencies:
- dependency-name: async
dependency-type: indirect
...
Signed-off-by: dependabot[bot] <support@github.com>
Co-authored-by: dependabot[bot] <49699333+dependabot[bot]@users.noreply.github.com>
* privval/file_test: reset vote ext sig before signing
Signed-off-by: Thane Thomson <connect@thanethomson.com>
Co-authored-by: M. J. Fromberger <fromberger@interchain.io>
Co-authored-by: Sergio Mena <sergio@informal.systems>
Co-authored-by: William Banfield <wbanfield@gmail.com>
Co-authored-by: dependabot[bot] <49699333+dependabot[bot]@users.noreply.github.com>
* Outstanding abci-gen changes to 'pb.go' files
* Removed modified_tx_status from spec and protobufs
* Fix sed for OSX
* Regenerated abci protobufs with 'abci-proto-gen'
* Code changes. UTs e2e tests passing
* Recovered UT: TestPrepareProposalModifiedTxStatusFalse
* Adapted UT
* Fixed UT
* Revert "Fix sed for OSX"
This reverts commit e576708c61.
* Update internal/state/execution_test.go
Co-authored-by: William Banfield <4561443+williambanfield@users.noreply.github.com>
* Update abci/example/kvstore/kvstore.go
Co-authored-by: M. J. Fromberger <fromberger@interchain.io>
* Update internal/state/execution_test.go
Co-authored-by: William Banfield <4561443+williambanfield@users.noreply.github.com>
* Update spec/abci++/abci++_tmint_expected_behavior_002_draft.md
Co-authored-by: William Banfield <4561443+williambanfield@users.noreply.github.com>
* Addressed some comments
* Added one test that tests error at the ABCI client + Fixed some mock calls
* Addressed remaining comments
* Update abci/example/kvstore/kvstore.go
Co-authored-by: William Banfield <4561443+williambanfield@users.noreply.github.com>
* Update abci/example/kvstore/kvstore.go
Co-authored-by: William Banfield <4561443+williambanfield@users.noreply.github.com>
* Update abci/example/kvstore/kvstore.go
Co-authored-by: William Banfield <4561443+williambanfield@users.noreply.github.com>
* Update spec/abci++/abci++_tmint_expected_behavior_002_draft.md
Co-authored-by: William Banfield <4561443+williambanfield@users.noreply.github.com>
* Addressed William's latest comments
* Adressed Michael's comment
* Fixed UT
* Some md fixes
* More md fixes
* gofmt
Co-authored-by: William Banfield <4561443+williambanfield@users.noreply.github.com>
Co-authored-by: M. J. Fromberger <fromberger@interchain.io>
After this change, new nodes will not have indexing enabled by default.
Test configurations will still use "kv".
* Update pending changelog and upgrading notes.
* Fix indexer config for the test app.
* Update config template and enable indexing for e2e tests.
closes: #8039
This pull request updates the new ABCI++ protos to use `enum`s in place of `bool`s. `enums` may be preferred over `bool` because an `enum` can be udpated to include new statuses in the future, whereas a `bool` cannot and is fixed as just `true` or `false` over the whole lifecycle of the API.
This change implements the logic for the PrepareProposal ABCI++ method call. The main logic for creating and issuing the PrepareProposal request lives in execution.go and is tested in a set of new tests in execution_test.go. This change also updates the mempool mock to use a mockery generated version and removes much of the plumbing for the no longer used ABCIResponses.
This change set implements the most recent version of `FinalizeBlock`.
# What does this change actually contain?
* This change set is rather large but fear not! The majority of the files touched and changes are renaming `ResponseDeliverTx` to `ExecTxResult`. This should be a pretty inoffensive change since they're effectively the same type but with a different name.
* The `execBlockOnProxyApp` was totally removed since it served as just a wrapper around the logic that is now mostly encapsulated within `FinalizeBlock`
* The `updateState` helper function has been made a public method on `State`. It was being exposed as a shim through the testing infrastructure, so this seemed innocuous.
* Tests already existed to ensure that the application received the `ByzantineValidators` and the `ValidatorUpdates`, but one was fixed up to ensure that `LastCommitInfo` was being sent across.
* Tests were removed from the `psql` indexer that seemed to search for an event in the indexer that was not being created.
# Questions for reviewers
* We store this [ABCIResponses](5721a13ab1/proto/tendermint/state/types.pb.go (L37)) type in the data base as the block results. This type has changed since v0.35 to contain the `FinalizeBlock` response. I'm wondering if we need to do any shimming to keep the old data retrieveable?
* Similarly, this change is exposed via the RPC through [ResultBlockResults](5721a13ab1/rpc/coretypes/responses.go (L69)) changing. Should we somehow shim or notify for this change?
closes: #7658
This change implements the spec for `ProcessProposal`. It first calls the Tendermint block validation logic to check that all of the proposed block fields are well formed and do not violate any of the rules for Tendermint to consider the block valid and then passes the validated block the `ProcessProposal`.
This change also adds additional fixtures to test the change. It adds the `baseMock` types that holds a mock as well as a reference to `BaseApplication`. If the function was not setup by the test on the contained mock Application, the type delegates to the `BaseApplication` and returns what `BaseApplication` returns.
The change also switches the `makeState` helper to take an arg struct so that an ABCI application can be plumbed through when needed.
closes: #7656
* testing: reduce usage of the MustDefualtLogger constructor
* Apply suggestions from code review
Co-authored-by: M. J. Fromberger <michael.j.fromberger@gmail.com>
* cleanup tests
Co-authored-by: M. J. Fromberger <michael.j.fromberger@gmail.com>
This is the first step in removing the mutex from ABCI applications:
making our test applications hold mutexes, which this does, hopefully
with zero impact. If this lands well, then we can explore deleting the
other mutexes (in the ABCI server and the clients.) While this change
is not user impacting at all, removing the other mutexes *will* be.
In persuit of this, I've changed the KV app somewhat, to put almost
all of the logic in the base application and make the persistent
application mostly be a wrapper on top of that with a different
storage layer.
